Merge branch 'for-rmk' of git://git.fluff.org/bjdooks/linux into devel-stable

Conflicts:
	arch/arm/Kconfig

Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt

@@ -55,4 +55,4 @@ Maintainers
   This board is maintained by Simtec Electronics.
 
 
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -134,4 +134,4 @@ Authour
 
 
 Ben Dooks, 03 October 2004
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics

Documentation/arm/Samsung-S3C24XX/Overview.txt

@@ -299,4 +299,4 @@ Port Contributors
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
+Ben Dooks, Copyright 2004-2006 Simtec Electronics

Documentation/arm/Samsung-S3C24XX/S3C2412.txt

@@ -117,4 +117,4 @@ ATA
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics

Documentation/arm/Samsung-S3C24XX/S3C2413.txt

@@ -18,4 +18,4 @@ Camera Interface
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics

Documentation/arm/Samsung-S3C24XX/Suspend.txt

@@ -133,5 +133,5 @@ Configuration
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004 Simtec Electronics
+Ben Dooks, Copyright 2004 Simtec Electronics
 

Documentation/arm/Samsung-S3C24XX/USB-Host.txt

@@ -90,4 +90,4 @@ Platform Data
 Document Author
 ---------------
 
-Ben Dooks, (c) 2005 Simtec Electronics
+Ben Dooks, Copyright 2005 Simtec Electronics

arch/arm/Kconfig

@@ -760,6 +760,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-dove/Kconfig"
 
+source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"

arch/arm/Makefile

@@ -179,9 +179,9 @@ plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/mach-s3c2400/include/mach/map.h

 /* arch/arm/mach-s3c2400/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/mach-s3c2410/Kconfig

@@ -81,6 +81,14 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
 	bool
 	help

arch/arm/mach-s3c2410/Makefile

@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o

arch/arm/mach-s3c2410/bast-irq.c

 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@ static __init int bast_irq_init(void)
 	unsigned int i;
 
 	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
 
 		/* zap all the IRQs */
 

arch/arm/mach-s3c2410/cpu-freq.c

 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/mach-s3c2410/h1940-bluetooth.c

@@ -17,6 +17,7 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
@@ -24,21 +25,10 @@
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
 	if (on) {
-#ifdef CONFIG_LEDS_H1940
-		/* flashing Blue */
-		led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
 		/* Power on the chip */
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
@@ -46,48 +36,31 @@ static void h1940bt_enable(int on)
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-		state = 1;
 	}
 	else {
-#ifdef CONFIG_LEDS_H1940
-		led_trigger_event(bt_led_trigger, 0);
-#endif
-
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		state = 0;
 	}
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", state);
+	h1940bt_enable(!blocked);
+	return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int new_state;
-	char *endp;
-
-	new_state = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
-		return -EINVAL;
-
-	h1940bt_enable(new_state);
-
-	return count;
-}
-static DEVICE_ATTR(enable, 0644,
-		h1940bt_show,
-		h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+	struct rfkill *rfk;
+	int ret = 0;
+
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
 	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-	/* disable BT by default */
-	h1940bt_enable(0);
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
 
-	return device_create_file(&pdev->dev, &dev_attr_enable);
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_unregister_simple(bt_led_trigger);
-#endif
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
 	return 0;
 }
 

arch/arm/mach-s3c2410/include/mach/bast-cpld.h

 /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * BAST - CPLD control constants

arch/arm/mach-s3c2410/include/mach/bast-irq.h

 /* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - IRQ Number definitions

arch/arm/mach-s3c2410/include/mach/bast-map.h

 /* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - Memory map definitions

arch/arm/mach-s3c2410/include/mach/bast-pmu.h

 /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
  *

arch/arm/mach-s3c2410/include/mach/dma.h

 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support

arch/arm/mach-s3c2410/include/mach/gpio-fns.h

 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware

arch/arm/mach-s3c2410/include/mach/osiris-map.h

 /* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/mach-s3c2410/include/mach/regs-clock.h

 /* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/mach-s3c2410/include/mach/regs-gpio.h

 /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/mach-s3c2410/include/mach/regs-power.h

 /* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/mach-s3c2410/include/mach/uncompress.h

-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/mach-s3c2410/include/mach/vr1000-irq.h

 /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine VR1000 - IRQ Number definitions

arch/arm/mach-s3c2410/mach-bast.c

 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -273,7 +274,7 @@ static struct mtd_partition bast_default_nand_part[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 	[0] = {
 		.name		= "SmartMedia",
 		.nr_chips	= 1,
@@ -323,7 +324,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, BAST_VA_CTRL2);
 }
 
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.tacls		= 30,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -608,6 +609,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.need_io	= 1,
 };
 
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -625,7 +631,6 @@ static void __init bast_map_io(void)
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_nand.dev.platform_data = &bast_nand_info;
 	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +644,7 @@ static void __init bast_init(void)
 	sysdev_register(&bast_pm_sysdev);
 
 	s3c_i2c0_set_platdata(&bast_i2c_info);
+	s3c_nand_set_platdata(&bast_nand_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
@@ -647,6 +653,7 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, &bast_audio);
 
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }

arch/arm/mach-s3c2410/mach-h1940.c

@@ -21,6 +21,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +37,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
@@ -46,6 +54,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/mci.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -171,16 +180,90 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
 	.gpdup_mask=	0xffffffff,
 };
 
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
 	.name             = "h1940-leds",
 	.id               = -1,
 };
 
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
 	.name             = "h1940-bt",
 	.id               = -1,
 };
 
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+	.gpio_detect   = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power     = NULL,
+	.ocr_avail     = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+	gpio_request(S3C2410_GPB(0), "Backlight");
+
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+	return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	/* tcnt = 0x31 */
+	.pwm_period_ns  = 36296,
+	.init           = h1940_backlight_init,
+	.exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	int value;
+
+	if (!power) {
+		/* set to 3ec */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		/* wait for 3ac */
+		do {
+			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+		} while (value);
+		/* set to 38c */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+	} else {
+		/* Set to 3ac */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		/* Set to 3ad */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+	}
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+	.set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+	.name                   = "platform-lcd",
+	.dev.parent             = &s3c_device_lcd.dev,
+	.dev.platform_data      = &h1940_lcd_power_data,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -188,8 +271,13 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
-	&s3c_device_leds,
-	&s3c_device_bluetooth,
+	&h1940_device_leds,
+	&h1940_device_bluetooth,
+	&s3c_device_sdi,
+	&s3c_device_rtc,
+	&s3c_device_timer[0],
+	&h1940_backlight,
+	&h1940_lcd_powerdev,
 };
 
 static void __init h1940_map_io(void)
@@ -219,6 +307,8 @@ static void __init h1940_init(void)
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
@@ -231,6 +321,11 @@ static void __init h1940_init(void)
 	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
+	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(5), "LCD power");
+	gpio_request(S3C2410_GPC(6), "LCD power");
+
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 

arch/arm/mach-s3c2410/mach-n30.c

@@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = {
 	&n35_button_device,
 };
 
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.frequency	= 10*1000,
@@ -500,8 +500,8 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&qt2410_led,
 };
 
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
 		.size	= 0x30000,
@@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = {
  * chips and beyond.
  */
 
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -331,7 +331,7 @@ static void __init qt2410_map_io(void)
 
 static void __init qt2410_machine_init(void)
 {
-	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+	s3c_nand_set_platdata(&qt2410_nand_info);
 
 	switch (tft_type) {
 	case 'p': /* production */

arch/arm/mach-s3c2410/mach-vr1000.c

 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -393,6 +394,7 @@ static void __init vr1000_init(void)
 				ARRAY_SIZE(vr1000_i2c_devs));
 
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, NULL);
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")

arch/arm/mach-s3c2410/pll.c

 /* arch/arm/mach-s3c2410/pll.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>

arch/arm/mach-s3c2410/usb-simtec.c

 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@ int usb_simtec_init(void)
 {
 	int ret;
 
-	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
 
 	ret = gpio_request(S3C2410_GPB(4), "USB power control");
 	if (ret < 0) {

arch/arm/mach-s3c2412/mach-jive.c

@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg jive_uartcfgs[] = {
  * 0x017d0000-0x02bd0000 : cramfs B
  * 0x02bd0000-0x03fd0000 : yaffs
  */
-static struct mtd_partition jive_imageA_nand_part[] = {
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -154,7 +154,7 @@ static struct mtd_partition jive_imageA_nand_part[] = {
         },
 };
 
-static struct mtd_partition jive_imageB_nand_part[] = {
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -213,7 +213,7 @@ static struct mtd_partition jive_imageB_nand_part[] = {
         },
 };
 
-static struct s3c2410_nand_set jive_nand_sets[] = {
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 	[0] = {
 		.name           = "flash",
 		.nr_chips       = 1,
@@ -222,7 +222,7 @@ static struct s3c2410_nand_set jive_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand jive_nand_info = {
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	/* set taken from osiris nand timings, possibly still conservative */
 	.tacls		= 30,
 	.twrph0		= 55,
@@ -631,7 +631,8 @@ static void __init jive_machine_init(void)
 
 	s3c_pm_init();
 
-	s3c_device_nand.dev.platform_data = &jive_nand_info;
+	/** TODO - check that this is after the cmdline option! */
+	s3c_nand_set_platdata(&jive_nand_info);
 
 	/* initialise the spi */
 

arch/arm/mach-s3c2412/mach-vstms.c

@@ -76,7 +76,7 @@ static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
 	}
 };
 
-static struct mtd_partition vstms_nand_part[] = {
+static struct mtd_partition __initdata vstms_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= 0x7C000,
@@ -99,7 +99,7 @@ static struct mtd_partition vstms_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set vstms_nand_sets[] = {
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -112,7 +112,7 @@ static struct s3c2410_nand_set vstms_nand_sets[] = {
  * chips and beyond.
 */
 
-static struct s3c2410_platform_nand vstms_nand_info = {
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -143,8 +143,6 @@ static void __init vstms_fixup(struct machine_desc *desc,
 
 static void __init vstms_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
@@ -153,6 +151,8 @@ static void __init vstms_map_io(void)
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&vstms_nand_info);
+
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 

arch/arm/mach-s3c2440/Kconfig

@@ -53,6 +53,19 @@ config MACH_OSIRIS
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
 
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440

arch/arm/mach-s3c2440/Makefile

@@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+
+# extra machine support
+
+obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o

arch/arm/mach-s3c2440/irq.c

 /* linux/arch/arm/mach-s3c2440/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify

arch/arm/mach-s3c2440/mach-anubis.c

 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -53,8 +53,9 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio-simtec.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
@@ -138,7 +139,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -161,7 +162,7 @@ static struct mtd_partition anubis_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition anubis_default_nand_part_large[] = {
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -191,7 +192,7 @@ static struct mtd_partition anubis_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set anubis_nand_sets[] = {
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -233,7 +234,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
 }
 
-static struct s3c2410_platform_nand anubis_nand_info = {
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -437,6 +438,17 @@ static struct i2c_board_info anubis_i2c_devs[] __initdata = {
 	}
 };
 
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -454,8 +466,6 @@ static void __init anubis_map_io(void)
 
 	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
 
-	s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
@@ -476,6 +486,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 
 /* NAND Flash on AT2440EVB board */
 
-static struct mtd_partition at2440evb_default_nand_part[] = {
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_256K,
@@ -114,7 +114,7 @@ static struct mtd_partition at2440evb_default_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
 	[0] = {
 		.name		= "nand",
 		.nr_chips	= 1,
@@ -123,7 +123,7 @@ static struct s3c2410_nand_set at2440evb_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand at2440evb_nand_info = {
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
-	s3c_device_sdi.name = "s3c2440-sdi";
 	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
@@ -228,6 +226,7 @@ static void __init at2440evb_map_io(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -532,7 +532,6 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 
-	s3c_device_nand.dev.platform_data = &mini2440_nand_info;
 	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
@@ -677,8 +676,11 @@ static void __init mini2440_init(void)
 		printk("\n");
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
+
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 

arch/arm/mach-s3c2440/mach-osiris-dvs.c

+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+	unsigned vregs1 = 0, vdcdc2 = 0;
+
+	if (!on) {
+		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
+	}
+
+	dvs_en = on;
+	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+	tps65010_config_vregs1(vregs1);
+	tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+	/* at the moment, we assume ARMCLK = HCLK => DVS */
+	return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+			      unsigned long val, void *data)
+{
+	struct cpufreq_freqs *cf = data;
+	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+	bool old_dvs = is_dvs(&freqs->old);
+	bool new_dvs = is_dvs(&freqs->new);
+	int ret = 0;
+
+	if (!dvs_en)
+		return 0;
+
+	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+	       freqs->old.armclk, freqs->old.hclk,
+	       freqs->new.armclk, freqs->new.hclk);
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (old_dvs & !new_dvs ||
+		    cur_dvs & !new_dvs) {
+			pr_debug("%s: exiting dvs\n", __func__);
+			cur_dvs = false;
+			gpio_set_value(OSIRIS_GPIO_DVS, 1);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (!old_dvs & new_dvs ||
+		    !cur_dvs & new_dvs) {
+			pr_debug("entering dvs\n");
+			cur_dvs = true;
+			gpio_set_value(OSIRIS_GPIO_DVS, 0);
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+	.notifier_call	= osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "initialising\n");
+
+	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot claim gpio\n");
+		goto err_nogpio;
+	}
+
+	/* start with dvs disabled */
+	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+	ret = cpufreq_register_notifier(&osiris_dvs_nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register with cpufreq\n");
+		goto err_nofreq;
+	}
+
+	osiris_dvs_tps_setdvs(true);
+
+	return 0;
+
+err_nofreq:
+	gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+	return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "exiting\n");
+
+	/* disable any current dvs */
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+
+	cpufreq_unregister_notifier(&osiris_dvs_nb,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	gpio_free(OSIRIS_GPIO_DVS);
+
+	return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+	cur_dvs = false;
+
+	return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+	osiris_dvs_tps_setdvs(true);
+	return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+	.suspend	= osiris_dvs_suspend,
+	.resume		= osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+	.probe		= osiris_dvs_probe,
+	.remove		= __devexit_p(osiris_dvs_remove),
+	.driver		= {
+		.name	= "osiris-dvs",
+		.owner	= THIS_MODULE,
+		.pm	= &osiris_dvs_pm,
+	},
+};
+
+static int __init osiris_dvs_init(void)
+{
+	return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+	platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");

arch/arm/mach-s3c2440/mach-osiris.c

 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -23,6 +23,8 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 
+#include <linux/i2c/tps65010.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -148,7 +150,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition osiris_default_nand_part[] = {
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -171,7 +173,7 @@ static struct mtd_partition osiris_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition osiris_default_nand_part_large[] = {
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -201,7 +203,7 @@ static struct mtd_partition osiris_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set osiris_nand_sets[] = {
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -243,7 +245,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 }
 
-static struct s3c2410_platform_nand osiris_nand_info = {
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -326,12 +328,44 @@ static struct sys_device osiris_pm_sysdev = {
 	.cls		= &osiris_pm_sysclass,
 };
 
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+	/* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+	.name	= "osiris-dvs",
+	.id	= -1,
+	.dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+	osiris_tps_device.dev.parent = &client->dev;
+	return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+	platform_device_unregister(&osiris_tps_device);
+	return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+	.base		= -1,	/* GPIO can go anywhere at the moment */
+	.setup		= osiris_tps_setup,
+	.teardown	= osiris_tps_remove,
+};
+
 /* I2C devices fitted. */
 
 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("tps65011", 0x48),
 		.irq	= IRQ_EINT20,
+		.platform_data = &osiris_tps_board,
 	},
 };
 
@@ -377,8 +411,6 @@ static void __init osiris_map_io(void)
 
 	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 
-	s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
@@ -408,6 +440,7 @@ static void __init osiris_init(void)
 	sysdev_register(&osiris_pm_sysdev);
 
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&osiris_nand_info);
 
 	s3c_cpufreq_setboard(&osiris_cpufreq);
 

arch/arm/mach-s3c2440/mach-rx3715.c

 /* linux/arch/arm/mach-s3c2440/mach-rx3715.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.handhelds.org/projects/rx3715.html
@@ -149,7 +149,7 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 	.gpdup_mask =	0xffffffff,
 };
 
-static struct mtd_partition rx3715_nand_part[] = {
+static struct mtd_partition __initdata rx3715_nand_part[] = {
 	[0] = {
 		.name		= "Whole Flash",
 		.offset		= 0,
@@ -158,7 +158,7 @@ static struct mtd_partition rx3715_nand_part[] = {
 	}
 };
 
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 	[0] = {
 		.name		= "Internal",
 		.nr_chips	= 1,
@@ -167,7 +167,7 @@ static struct s3c2410_nand_set rx3715_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand rx3715_nand_info = {
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 50,
 	.twrph1		= 15,
@@ -186,8 +186,6 @@ static struct platform_device *rx3715_devices[] __initdata = {
 
 static void __init rx3715_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
@@ -205,6 +203,7 @@ static void __init rx3715_init_machine(void)
 #endif
 	s3c_pm_init();
 
+	s3c_nand_set_platdata(&rx3715_nand_info);
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 }

arch/arm/mach-s3c2440/mach-smdk2440.c

 /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.fluff.org/ben/smdk2440/

arch/arm/mach-s3c2442/mach-gta02.c

@@ -423,7 +423,7 @@ static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	},
 };
 
-static struct s3c2410_nand_set gta02_nand_sets[] = {
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
 	[0] = {
 		/*
 		 * This name is also hard-coded in the boot loaders, so
@@ -442,7 +442,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
  * data sheet (K5D2G13ACM-D075 MCP Memory).
  */
 
-static struct s3c2410_platform_nand gta02_nand_info = {
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.tacls		= 0,
 	.twrph0		= 25,
 	.twrph1		= 15,
@@ -621,9 +621,9 @@ static void __init gta02_machine_init(void)
 #endif
 
 	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-	s3c_device_nand.dev.platform_data = &gta02_nand_info;
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));

arch/arm/mach-s3c24a0/include/mach/map.h

 /* linux/arch/arm/mach-s3c24a0/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/mach-s3c24a0/include/mach/regs-clock.h

 /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/mach-s3c6400/include/mach/map.h

@@ -64,6 +64,9 @@
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -79,5 +82,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
 #endif /* __ASM_ARCH_6400_MAP_H */

arch/arm/mach-s3c6400/include/mach/regs-fb.h

-/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - new-style framebuffer register definitions
+ * Copyright 2009 Samsung Electronics Co.
  *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
  *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
+ * Framebuffer register definitions for Samsung S3C64xx.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
-
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
-/* Video buffer addresses */
-
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDINTCON0				(0x130)
-
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
 
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+#include <plat/regs-fb-v4.h>
 
 /* Palette registers */
-
 #define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
 #define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
 #define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
 #define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
 #define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
 static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 {
 	switch (window) {
@@ -203,57 +38,4 @@ static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 	BUG();
 }
 
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */

arch/arm/mach-s3c6400/s3c6400.c

@@ -45,6 +45,7 @@ void __init s3c6400_map_io(void)
 
 	s3c6400_default_sdhci0();
 	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");

arch/arm/mach-s3c6410/cpu.c

@@ -58,6 +58,7 @@ void __init s3c6410_map_io(void)
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");

arch/arm/mach-s3c6410/mach-hmt.c

@@ -250,7 +250,7 @@ static void __init hmt_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+	s3c_nand_set_platdata(&hmt_nand_info);
 
 	gpio_request(S3C64XX_GPC(7), "usb power");
 	gpio_direction_output(S3C64XX_GPC(7), 0);

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -184,6 +185,43 @@ static struct platform_device smdk6410_smsc911x = {
 	},
 };
 
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -198,6 +236,10 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_usb,
 	&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
@@ -232,6 +274,14 @@ static struct regulator_init_data wm8350_dcdc3_data = {
 };
 
 /* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
 static struct regulator_init_data wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
@@ -239,6 +289,8 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 		.max_uV = 3000000,
 		.always_on = 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
 /* ARM core */

arch/arm/mach-s5pc100/Kconfig

@@ -14,9 +14,23 @@ config CPU_S5PC100
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_SDHCI
+        bool
+        select S5PC1XX_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PC100 based SDHCI systems
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC1XX_SETUP_I2C0
 	select S5PC1XX_SETUP_I2C1
+	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100

arch/arm/mach-s5pc100/Makefile

@@ -13,5 +13,9 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
 
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+
 # machine support
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o

arch/arm/mach-s5pc100/cpu.c

@@ -22,6 +22,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
+#include <asm/proc-fns.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -45,6 +48,23 @@
 static struct map_desc s5pc100_iodesc[] __initdata = {
 };
 
+static void s5pc100_idle(void)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S5PC100_PWR_CFG);
+	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+	__raw_writel(tmp, S5PC100_PWR_CFG);
+
+	tmp = __raw_readl(S5PC100_OTHERS);
+	tmp |= S5PC100_PMU_INT_DISABLE;
+	__raw_writel(tmp, S5PC100_OTHERS);
+
+	cpu_do_idle();
+}
+
 /* s5pc100_map_io
  *
  * register the standard cpu IO areas
@@ -55,6 +75,13 @@ void __init s5pc100_map_io(void)
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
 
 	/* initialise device information early */
+	s5pc100_default_sdhci0();
+	s5pc100_default_sdhci1();
+	s5pc100_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
 }
 
 void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@ int __init s5pc100_init(void)
 {
 	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
 
+	s5pc1xx_idle = s5pc100_idle;
+
 	return sysdev_register(&s5pc100_sysdev);
 }

arch/arm/mach-s5pc100/include/mach/gpio.h

@@ -18,40 +18,45 @@
 #define gpio_to_irq	__gpio_to_irq
 
 /* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR	(8)
-#define S5PC1XX_GPIO_A1_NR	(5)
-#define S5PC1XX_GPIO_B_NR	(8)
-#define S5PC1XX_GPIO_C_NR	(5)
-#define S5PC1XX_GPIO_D_NR	(7)
-#define S5PC1XX_GPIO_E0_NR	(8)
-#define S5PC1XX_GPIO_E1_NR	(6)
-#define S5PC1XX_GPIO_F0_NR	(8)
-#define S5PC1XX_GPIO_F1_NR	(8)
-#define S5PC1XX_GPIO_F2_NR	(8)
-#define S5PC1XX_GPIO_F3_NR	(4)
-#define S5PC1XX_GPIO_G0_NR	(8)
-#define S5PC1XX_GPIO_G1_NR	(3)
-#define S5PC1XX_GPIO_G2_NR	(7)
-#define S5PC1XX_GPIO_G3_NR	(7)
-#define S5PC1XX_GPIO_H0_NR	(8)
-#define S5PC1XX_GPIO_H1_NR	(8)
-#define S5PC1XX_GPIO_H2_NR	(8)
-#define S5PC1XX_GPIO_H3_NR	(8)
-#define S5PC1XX_GPIO_I_NR	(8)
-#define S5PC1XX_GPIO_J0_NR	(8)
-#define S5PC1XX_GPIO_J1_NR	(5)
-#define S5PC1XX_GPIO_J2_NR	(8)
-#define S5PC1XX_GPIO_J3_NR	(8)
-#define S5PC1XX_GPIO_J4_NR	(4)
-#define S5PC1XX_GPIO_K0_NR	(8)
-#define S5PC1XX_GPIO_K1_NR	(6)
-#define S5PC1XX_GPIO_K2_NR	(8)
-#define S5PC1XX_GPIO_K3_NR	(8)
-#define S5PC1XX_GPIO_MP00_NR	(8)
-#define S5PC1XX_GPIO_MP01_NR	(8)
-#define S5PC1XX_GPIO_MP02_NR	(8)
-#define S5PC1XX_GPIO_MP03_NR	(8)
-#define S5PC1XX_GPIO_MP04_NR	(5)
+#define S5PC100_GPIO_A0_NR	(8)
+#define S5PC100_GPIO_A1_NR	(5)
+#define S5PC100_GPIO_B_NR	(8)
+#define S5PC100_GPIO_C_NR	(5)
+#define S5PC100_GPIO_D_NR	(7)
+#define S5PC100_GPIO_E0_NR	(8)
+#define S5PC100_GPIO_E1_NR	(6)
+#define S5PC100_GPIO_F0_NR	(8)
+#define S5PC100_GPIO_F1_NR	(8)
+#define S5PC100_GPIO_F2_NR	(8)
+#define S5PC100_GPIO_F3_NR	(4)
+#define S5PC100_GPIO_G0_NR	(8)
+#define S5PC100_GPIO_G1_NR	(3)
+#define S5PC100_GPIO_G2_NR	(7)
+#define S5PC100_GPIO_G3_NR	(7)
+#define S5PC100_GPIO_H0_NR	(8)
+#define S5PC100_GPIO_H1_NR	(8)
+#define S5PC100_GPIO_H2_NR	(8)
+#define S5PC100_GPIO_H3_NR	(8)
+#define S5PC100_GPIO_I_NR	(8)
+#define S5PC100_GPIO_J0_NR	(8)
+#define S5PC100_GPIO_J1_NR	(5)
+#define S5PC100_GPIO_J2_NR	(8)
+#define S5PC100_GPIO_J3_NR	(8)
+#define S5PC100_GPIO_J4_NR	(4)
+#define S5PC100_GPIO_K0_NR	(8)
+#define S5PC100_GPIO_K1_NR	(6)
+#define S5PC100_GPIO_K2_NR	(8)
+#define S5PC100_GPIO_K3_NR	(8)
+#define S5PC100_GPIO_L0_NR	(8)
+#define S5PC100_GPIO_L1_NR	(8)
+#define S5PC100_GPIO_L2_NR	(8)
+#define S5PC100_GPIO_L3_NR	(8)
+#define S5PC100_GPIO_L4_NR	(8)
+#define S5PC100_GPIO_MP00_NR	(8)
+#define S5PC100_GPIO_MP01_NR	(8)
+#define S5PC100_GPIO_MP02_NR	(8)
+#define S5PC100_GPIO_MP03_NR	(8)
+#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -64,83 +69,94 @@
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
 enum s3c_gpio_number {
-	S5PC1XX_GPIO_A0_START 	= 0,
-	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
-	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
-	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
-	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
-	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
-	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
-	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
-	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
-	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
-	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
-	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
-	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
-	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
-	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
-	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
-	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
-	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
-	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
-	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
-	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
-	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
-	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
-	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
-	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
-	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
-	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
-	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
-	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
-	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
-	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
-	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
-	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
-	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+	S5PC100_GPIO_A0_START	= 0,
+	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
 };
 
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END		S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
 #include <asm-generic/gpio.h>

arch/arm/mach-s5pc100/include/mach/irqs.h

@@ -11,4 +11,9 @@
 
 #include <plat/irqs.h>
 
+/* LCD */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
+
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s5pc100/include/mach/map.h

@@ -17,6 +17,19 @@
 
 #include <plat/map-base.h>
 
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
+ * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
+ * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
+ * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
+ * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
+ * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
+ *
+ */
 
 /* Chip ID */
 #define S5PC100_PA_CHIPID	(0xE0000000)
@@ -24,13 +37,20 @@
 #define S5PC1XX_VA_CHIPID	S3C_VA_SYS
 
 /* System */
-#define S5PC100_PA_SYS		(0xE0100000)
-#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK		(0xE0100000)
+#define S5PC100_PA_CLK_OTHER	(0xE0200000)
+#define S5PC100_PA_PWR		(0xE0108000)
 #define S5PC1XX_PA_CLK		S5PC100_PA_CLK
 #define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
 #define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
 #define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO		(0xE0300000)
+#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
 #define S5PC100_PA_VIC		(0xE4000000)
@@ -40,23 +60,64 @@
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+/* DMA */
+#define S5PC100_PA_MDMA		(0xE8100000)
+#define S5PC100_PA_PDMA0	(0xE9000000)
+#define S5PC100_PA_PDMA1	(0xE9200000)
+
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
 #define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
 #define S5PC1XX_VA_TIMER	S3C_VA_TIMER
 
+/* RTC */
+#define S5PC100_PA_RTC		(0xEA300000)
+
 /* UART */
 #define S5PC100_PA_UART		(0xEC000000)
 #define S5PC1XX_PA_UART		S5PC100_PA_UART
 #define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* IIC */
-#define S5PC100_PA_IIC		(0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C		(0xEC100000)
+#define S5PC100_PA_I2C1		(0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG	(0xED200000)
+#define S5PC100_PA_USB_HSPHY	(0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB		(0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D		(0xEE800000)
+#define S5PC100_PA_JPEG		(0xEE500000)
+#define S5PC100_PA_ROTATOR	(0xEE100000)
+#define S5PC100_PA_G3D		(0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0		(0xF2000000)
+#define S5PC100_PA_I2S1		(0xF2100000)
+#define S5PC100_PA_I2S2		(0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD	(0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC	(0xF3000000)
 
 /* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
+#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
 
 /* compatibility defines. */
+#define S3C_PA_RTC		S5PC100_PA_RTC
 #define S3C_PA_UART		S5PC100_PA_UART
 #define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
 #define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
 #define S3C_VA_UART2		(S3C_VA_UART + 0x800)
 #define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
 #define S3C_UART_OFFSET		0x400
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB		S5PC100_PA_FB
+#define S3C_PA_G2D		S5PC100_PA_G2D
+#define S3C_PA_G3D		S5PC100_PA_G3D
+#define S3C_PA_JPEG		S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
 #define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_IIC
+#define S3C_PA_IIC		S5PC100_PA_I2C
+#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC		S5PC100_PA_TSADC
 
 #endif /* __ASM_ARCH_C100_MAP_H */

arch/arm/mach-s5pc100/include/mach/regs-fb.h

+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *   Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0						(0x118)
+#define VP1_RATECON_EN					(1 << 31)
+#define VP1_CLKRATE_MASK				(0xff)
+
+#define VP1CON1						(0x11c)
+#define VP1_VTREGCON_EN					(1 << 31)
+#define VP1_VBPD_MASK					(0xfff)
+#define VP1_VBPD_SHIFT					(16)
+
+
+#define WPALCON_H					(0x19c)
+#define WPALCON_L					(0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888			(0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888			(0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK				(0x1)
+#define WPALCON_L_W2PAL_L_SHIFT				(6)
+#define WPALCON_L_W3PAL_L_SHIFT				(7)
+#define WPALCON_L_W4PAL_L_SHIFT				(8)
+
+#define WPALCON_L_WxPAL_H_MASK				(0x3)
+#define WPALCON_H_W2PAL_H_SHIFT				(9)
+#define WPALCON_H_W3PAL_H_SHIFT				(13)
+#define WPALCON_H_W4PAL_H_SHIFT				(17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win)				(0x200 + (_win * 8))
+#define VIDWxALPHA1(_win)				(0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x)				((_x) << 16)
+#define VIDW0ALPHAx_R_MASK				(0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT				(16)
+#define VIDW0ALPHAx_G(_x)				((_x) << 8)
+#define VIDW0ALPHAx_G_MASK				(0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT				(8)
+#define VIDW0ALPHAx_B(_x)				((_x) << 0)
+#define VIDW0ALPHAx_B_MASK				(0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT				(0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x)				((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK				(0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT				(16)
+#define VIDW14ALPHAx_G_L(_x)				((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK				(0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT				(8)
+#define VIDW14ALPHAx_B_L(_x)				((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK				(0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT				(0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win)					(0x244 + ((_win) * 4))
+#define BLENDEQ1					(0x244)
+#define BLENDEQ2					(0x248)
+#define BLENDEQ3					(0x24c)
+#define BLENDEQ4					(0x250)
+
+#define BLENDEQx_Q_FUNC(_x)				((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK				(0xf << 18)
+#define BLENDEQx_P_FUNC(_x)				((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK				(0xf << 12)
+#define BLENDEQx_B_FUNC(_x)				((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK				(0xf << 6)
+#define BLENDEQx_A_FUNC(_x)				((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK				(0xf << 0)
+
+#define BLENDCON					(0x260)
+#define BLENDCON_8BIT_ALPHA				(1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE					(0x2400)
+#define WIN0_PAL_END					(0x27fc)
+#define WIN1_PAL_BASE					(0x2800)
+#define WIN1_PAL_END					(0x2bfc)
+#define WIN2_PAL_BASE					(0x2c00)
+#define WIN2_PAL_END					(0x2ffc)
+#define WIN3_PAL_BASE					(0x3000)
+#define WIN3_PAL_END					(0x33fc)
+#define WIN4_PAL_BASE					(0x3400)
+#define WIN4_PAL_END					(0x37fc)
+
+#define WIN0_PAL(_entry)			(WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry)			(WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry)			(WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry)			(WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+

arch/arm/mach-s5pc100/include/mach/system.h

@@ -11,14 +11,21 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
 static void arch_idle(void)
 {
-	/* nothing here yet */
+	if (s5pc1xx_idle)
+		s5pc1xx_idle();
 }
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+	return;
 }
-
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s5pc100/mach-smdkc100.c

@@ -27,16 +27,22 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	},
 };
 
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	/* backlight */
+	gpio_direction_output(S5PC100_GPD(0), power);
+
+	if (power) {
+		/* module reset */
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(100);
+		gpio_direction_output(S5PC100_GPH0(6), 0);
+		mdelay(10);
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(10);
+	}
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+	.set_power	= smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.refresh	= 70,
+		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+	.win[0]		= &smdkc100_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
+};
+
 static struct map_desc smdkc100_iodesc[] = {};
 
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&smdkc100_lcd_powerdev,
 };
 
 static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
+	/* I2C */
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+	/* LCD init */
+	gpio_request(S5PC100_GPD(0), "GPD");
+	gpio_request(S5PC100_GPH0(6), "GPH0");
+	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.phys_io	= S5PC100_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5PC100_PA_SDRAM + 0x100,
 

arch/arm/mach-s5pc100/setup-sdhci.c

+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	/* [2] = "mmc_bus", not yet succesfuuly used yet */
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}

arch/arm/plat-s3c/Kconfig

@@ -159,6 +159,12 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
 # DMA
 
 config S3C_DMA
@@ -178,6 +184,11 @@ config S3C_DEV_HSMMC1
 	help
 	  Compile in platform device definitions for HSMMC channel 1
 
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
 config S3C_DEV_I2C1
 	bool
 	help

arch/arm/plat-s3c/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o

arch/arm/plat-s3c/clock.c

 /* linux/arch/arm/plat-s3c24xx/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Core clock control support
@@ -337,7 +337,7 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
 
 	clk_xtal.rate = xtal;
 

arch/arm/plat-s3c/dev-hsmmc2.c

+/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * Copyright (c) 2009 Maurus Cuelenaere
+ *
+ * Based on arch/arm/plat-s3c/dev-hsmmc1.c
+ * original file Copyright (c) 2008 Simtec Electronics
+ *
+ * S3C series device definition for hsmmc device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC2,
+		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC2,
+		.end   = IRQ_HSMMC2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc2_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}

arch/arm/plat-s3c/dev-i2c0.c

 /* linux/arch/arm/plat-s3c/dev-i2c0.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *

arch/arm/plat-s3c/dev-i2c1.c

 /* linux/arch/arm/plat-s3c/dev-i2c1.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *

arch/arm/plat-s3c/dev-nand.c

@@ -9,8 +9,12 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
 #include <mach/map.h>
 #include <plat/devs.h>
+#include <plat/nand.h>
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
@@ -28,3 +32,96 @@ struct platform_device s3c_device_nand = {
 };
 
 EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	size = sizeof(int) * set->nr_chips;
+	if (size) {
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */ 
+
+	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+		return;
+	}
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+		
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (!ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);

arch/arm/plat-s3c/dma.c

 /* linux/arch/arm/plat-s3c/dma.c
  *
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *

arch/arm/plat-s3c/include/plat/audio-simtec.h

@@ -33,5 +33,5 @@ struct s3c24xx_audio_simtec_pdata {
 	void	(*startup)(void);
 };
 
-extern int simtec_audio_add(const char *codec_name,
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
 			    struct s3c24xx_audio_simtec_pdata *pdata);

arch/arm/plat-s3c/include/plat/cpu-freq.h

 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/plat-s3c/include/plat/cpu.h

@@ -12,6 +12,9 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -73,3 +76,6 @@ extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 
+extern void (*s5pc1xx_idle)(void);
+
+#endif

arch/arm/plat-s3c/include/plat/dma.h

 /* arch/arm/plat-s3c/include/plat/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C DMA support

arch/arm/plat-s3c/include/plat/fb.h

@@ -70,4 +70,11 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */

arch/arm/plat-s3c/include/plat/iic.h

 /* arch/arm/plat-s3c/include/plat/iic.h
  *
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C - I2C Controller platform_device info

arch/arm/plat-s3c/include/plat/nand.h

@@ -55,3 +55,11 @@ struct s3c2410_platform_nand {
 					       int chip);
 };
 
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);

arch/arm/plat-s3c/include/plat/regs-fb-v4.h

+/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/

arch/arm/plat-s3c/include/plat/regs-nand.h

 /* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/plat-s3c/include/plat/regs-serial.h

@@ -6,7 +6,7 @@
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
  *
  *  Adapted from:
  *

arch/arm/plat-s3c/include/plat/sdhci.h

@@ -57,6 +57,7 @@ struct s3c_sdhci_platdata {
  */
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -64,11 +65,16 @@ extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 
 /* Helper function availablity */
 
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -103,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void)
 static inline void s3c6400_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
@@ -140,9 +157,70 @@ static inline void s3c6410_default_sdhci1(void)
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C6410_SETUP_SDHCI */
 
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
 #endif /* __PLAT_S3C_SDHCI_H */

arch/arm/plat-s3c/pm-check.c

 /* linux/arch/arm/plat-s3c/pm-check.c
  *  originally in linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/plat-s3c/pm.c

 /* linux/arch/arm/plat-s3c/pm.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *

arch/arm/plat-s3c24xx/Kconfig

@@ -178,4 +178,11 @@ config MACH_SMDK
 	help
 	  Common machine code for SMDK2410 and SMDK2440
 
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
 endif

arch/arm/plat-s3c24xx/Makefile

@@ -55,3 +55,4 @@ obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 # machine common support
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o

arch/arm/plat-s3c24xx/clock-dclk.c

 /* linux/arch/arm/plat-s3c24xx/clock-dclk.c
  *
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *

arch/arm/plat-s3c24xx/common-smdk.c

@@ -198,7 +198,7 @@ void __init smdk_machine_init(void)
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
-	s3c_device_nand.dev.platform_data = &smdk_nand_info;
+	s3c_nand_set_platdata(&smdk_nand_info);
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 

arch/arm/plat-s3c24xx/cpu-freq.c

 /* linux/arch/arm/plat-s3c24xx/cpu-freq.c
  *
- * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/plat-s3c24xx/dma.c

 /* linux/arch/arm/plat-s3c24xx/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core
@@ -1310,7 +1310,7 @@ int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
 	int channel;
 	int ret;
 
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
 
 	dma_channels = channels;
 

arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h

 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *

arch/arm/plat-s3c24xx/include/plat/mci.h

 #ifndef _ARCH_MCI_H
 #define _ARCH_MCI_H
 
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
 struct s3c24xx_mci_pdata {
 	unsigned int	no_wprotect : 1;
 	unsigned int	no_detect : 1;

arch/arm/plat-s3c24xx/include/plat/regs-dma.h

 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support

arch/arm/plat-s3c24xx/irq-pm.c

 /* linux/arch/arm/plat-s3c24xx/irq-om.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *

arch/arm/plat-s3c24xx/irq.c

 /* linux/arch/arm/plat-s3c24xx/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics 
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify

arch/arm/plat-s3c24xx/pm-simtec.c

 /* linux/arch/arm/plat-s3c24xx/pm-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://armlinux.simtec.co.uk/
@@ -35,7 +35,7 @@
 
 #include <plat/pm.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
  *

arch/arm/plat-s3c24xx/pm.c

 /* linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Power Manager (Suspend-To-RAM) support

arch/arm/plat-s3c24xx/s3c2410-iotiming.c

 /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *