bnx2x: Correct speed from baseT into KR.

ethtool shows KR supported/advertised speeds incorrectly as baseT
in cases the board is in fact KR-base.
Signed-off-by: NYaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -257,14 +257,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+	u32 media_type;
 
 	/* Dual Media boards present all available port types */
 	cmd->supported = bp->port.supported[cfg_idx] |
 		(bp->port.supported[cfg_idx ^ 1] &
 		 (SUPPORTED_TP | SUPPORTED_FIBRE));
 	cmd->advertising = bp->port.advertising[cfg_idx];
-	if (bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type ==
-	    ETH_PHY_SFP_1G_FIBER) {
+	media_type = bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type;
+	if (media_type == ETH_PHY_SFP_1G_FIBER) {
 		cmd->supported &= ~(SUPPORTED_10000baseT_Full);
 		cmd->advertising &= ~(ADVERTISED_10000baseT_Full);
 	}
@@ -312,12 +313,26 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			cmd->lp_advertising |= ADVERTISED_100baseT_Full;
 		if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE)
 			cmd->lp_advertising |= ADVERTISED_1000baseT_Half;
-		if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE)
-			cmd->lp_advertising |= ADVERTISED_1000baseT_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE) {
+			if (media_type == ETH_PHY_KR) {
+				cmd->lp_advertising |=
+					ADVERTISED_1000baseKX_Full;
+			} else {
+				cmd->lp_advertising |=
+					ADVERTISED_1000baseT_Full;
+			}
+		}
 		if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE)
 			cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
-		if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
-			cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE) {
+			if (media_type == ETH_PHY_KR) {
+				cmd->lp_advertising |=
+					ADVERTISED_10000baseKR_Full;
+			} else {
+				cmd->lp_advertising |=
+					ADVERTISED_10000baseT_Full;
+			}
+		}
 		if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE)
 			cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full;
 	}
@@ -564,15 +579,20 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 				return -EINVAL;
 			}
 
-			if (!(bp->port.supported[cfg_idx] &
-			      SUPPORTED_1000baseT_Full)) {
+			if (bp->port.supported[cfg_idx] &
+			     SUPPORTED_1000baseT_Full) {
+				advertising = (ADVERTISED_1000baseT_Full |
+					       ADVERTISED_TP);
+
+			} else if (bp->port.supported[cfg_idx] &
+				   SUPPORTED_1000baseKX_Full) {
+				advertising = ADVERTISED_1000baseKX_Full;
+			} else {
 				DP(BNX2X_MSG_ETHTOOL,
 				   "1G full not supported\n");
 				return -EINVAL;
 			}
 
-			advertising = (ADVERTISED_1000baseT_Full |
-				       ADVERTISED_TP);
 			break;
 
 		case SPEED_2500:
@@ -600,17 +620,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 				return -EINVAL;
 			}
 			phy_idx = bnx2x_get_cur_phy_idx(bp);
-			if (!(bp->port.supported[cfg_idx]
-			      & SUPPORTED_10000baseT_Full) ||
-			    (bp->link_params.phy[phy_idx].media_type ==
+			if ((bp->port.supported[cfg_idx] &
+			     SUPPORTED_10000baseT_Full) &&
+			    (bp->link_params.phy[phy_idx].media_type !=
 			     ETH_PHY_SFP_1G_FIBER)) {
+				advertising = (ADVERTISED_10000baseT_Full |
+					       ADVERTISED_FIBRE);
+			} else if (bp->port.supported[cfg_idx] &
+			       SUPPORTED_10000baseKR_Full) {
+				advertising = (ADVERTISED_10000baseKR_Full |
+					       ADVERTISED_FIBRE);
+			} else {
 				DP(BNX2X_MSG_ETHTOOL,
 				   "10G full not supported\n");
 				return -EINVAL;
 			}
 
-			advertising = (ADVERTISED_10000baseT_Full |
-				       ADVERTISED_FIBRE);
 			break;
 
 		default:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

@@ -11493,7 +11493,9 @@ static const struct bnx2x_phy phy_warpcore = {
 			   SUPPORTED_100baseT_Half |
 			   SUPPORTED_100baseT_Full |
 			   SUPPORTED_1000baseT_Full |
+			   SUPPORTED_1000baseKX_Full |
 			   SUPPORTED_10000baseT_Full |
+			   SUPPORTED_10000baseKR_Full |
 			   SUPPORTED_20000baseKR2_Full |
 			   SUPPORTED_20000baseMLD2_Full |
 			   SUPPORTED_FIBRE |
@@ -11999,8 +12001,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
 			break;
 		case PORT_HW_CFG_NET_SERDES_IF_KR:
 			phy->media_type = ETH_PHY_KR;
-			phy->supported &= (SUPPORTED_1000baseT_Full |
-					   SUPPORTED_10000baseT_Full |
+			phy->supported &= (SUPPORTED_1000baseKX_Full |
+					   SUPPORTED_10000baseKR_Full |
 					   SUPPORTED_FIBRE |
 					   SUPPORTED_Autoneg |
 					   SUPPORTED_Pause |
@@ -12018,8 +12020,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
 			phy->media_type = ETH_PHY_KR;
 			phy->flags |= FLAGS_WC_DUAL_MODE;
 			phy->supported &= (SUPPORTED_20000baseKR2_Full |
-					   SUPPORTED_10000baseT_Full |
-					   SUPPORTED_1000baseT_Full |
+					   SUPPORTED_10000baseKR_Full |
+					   SUPPORTED_1000baseKX_Full |
 					   SUPPORTED_Autoneg |
 					   SUPPORTED_FIBRE |
 					   SUPPORTED_Pause |

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -11143,6 +11143,12 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
 				bp->port.advertising[idx] |=
 					(ADVERTISED_1000baseT_Full |
 					 ADVERTISED_TP);
+			} else if (bp->port.supported[idx] &
+				   SUPPORTED_1000baseKX_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_1000;
+				bp->port.advertising[idx] |=
+					ADVERTISED_1000baseKX_Full;
 			} else {
 				BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x  speed_cap_mask 0x%x\n",
 				    link_config,
@@ -11175,6 +11181,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
 				bp->port.advertising[idx] |=
 					(ADVERTISED_10000baseT_Full |
 						ADVERTISED_FIBRE);
+			} else if (bp->port.supported[idx] &
+				   SUPPORTED_10000baseKR_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_10000;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_10000baseKR_Full |
+						ADVERTISED_FIBRE);
 			} else {
 				BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x  speed_cap_mask 0x%x\n",
 				    link_config,