提交 5385edc5 编写于 作者: V Ville Syrjala 提交者: Pierre Ossman

at91_mci: AT91SAM9260/9263 12 byte write erratum (v2)

AT91SAM926[0/3] PDC must write at least 12 bytes. The code compiles and runs
but the actual condition for this erratum did not trigger in my tests so it's
unclear if it actually works as intended.
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
上级 fa1fe010
......@@ -198,9 +198,14 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
unsigned int len, i, size;
unsigned *dmabuf = host->buffer;
size = host->total_length;
size = data->blksz * data->blocks;
len = data->sg_len;
/* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */
if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
if (host->total_length == 12)
memset(dmabuf, 0, 12);
/*
* Just loop through all entries. Size might not
* be the entire list though so make sure that
......@@ -222,9 +227,10 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
for (index = 0; index < (amount / 4); index++)
*dmabuf++ = swab32(sgbuffer[index]);
}
else
} else {
memcpy(dmabuf, sgbuffer, amount);
dmabuf += amount;
}
kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
......@@ -417,7 +423,7 @@ static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
/* card is in IDLE mode now */
pr_debug("-> bytes_xfered %d, total_length = %d\n",
data->bytes_xfered, host->total_length);
data->bytes_xfered = host->total_length;
data->bytes_xfered = data->blksz * data->blocks;
}
}
}
......@@ -600,6 +606,13 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
* Handle a write
*/
host->total_length = block_length * blocks;
/*
* AT91SAM926[0/3] Data Write Operation and
* number of bytes erratum
*/
if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
if (host->total_length < 12)
host->total_length = 12;
host->buffer = dma_alloc_coherent(NULL,
host->total_length,
&host->physical_address, GFP_KERNEL);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册