mfd: wm5102: Fix defaults array based on testing

My automated test is back and now can check defaults against the actual
hardware. This patch updates the defaults array for the differences
detected and removes a couple of completely unused registers.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

drivers/mfd/wm5102-tables.c

@@ -297,7 +297,6 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000174, 0x007D },   /* R372   - FLL1 Control 4 */ 
 	{ 0x00000175, 0x0004 },   /* R373   - FLL1 Control 5 */ 
 	{ 0x00000176, 0x0000 },   /* R374   - FLL1 Control 6 */ 
-	{ 0x00000177, 0x0181 },   /* R375   - FLL1 Loop Filter Test 1 */ 
 	{ 0x00000179, 0x0000 },   /* R377   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },   /* R385   - FLL1 Synchroniser 1 */ 
 	{ 0x00000182, 0x0000 },   /* R386   - FLL1 Synchroniser 2 */ 
@@ -314,7 +313,6 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000194, 0x007D },   /* R404   - FLL2 Control 4 */ 
 	{ 0x00000195, 0x0004 },   /* R405   - FLL2 Control 5 */ 
 	{ 0x00000196, 0x0000 },   /* R406   - FLL2 Control 6 */ 
-	{ 0x00000197, 0x0000 },   /* R407   - FLL2 Loop Filter Test 1 */ 
 	{ 0x00000199, 0x0000 },   /* R409   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },   /* R417   - FLL2 Synchroniser 1 */ 
 	{ 0x000001A2, 0x0000 },   /* R418   - FLL2 Synchroniser 2 */ 
@@ -338,7 +336,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x000002A3, 0x1102 },   /* R675   - Mic Detect 1 */ 
 	{ 0x000002A4, 0x009F },   /* R676   - Mic Detect 2 */ 
 	{ 0x000002A6, 0x3737 },   /* R678   - Mic Detect Level 1 */
-	{ 0x000002A7, 0x372C },   /* R679   - Mic Detect Level 2 */
+	{ 0x000002A7, 0x2C37 },   /* R679   - Mic Detect Level 2 */
 	{ 0x000002A8, 0x1422 },   /* R680   - Mic Detect Level 3 */
 	{ 0x000002A9, 0x030A },   /* R681   - Mic Detect Level 4 */
 	{ 0x000002C3, 0x0000 },   /* R707   - Mic noise mix control 1 */ 
@@ -402,7 +400,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000435, 0x0180 },   /* R1077  - DAC Digital Volume 5R */ 
 	{ 0x00000436, 0x0081 },   /* R1078  - DAC Volume Limit 5R */
 	{ 0x00000437, 0x0200 },   /* R1079  - Noise Gate Select 5R */
-	{ 0x00000440, 0x8FFF },   /* R1088  - DRE Enable */
+	{ 0x00000440, 0x0FFF },   /* R1088  - DRE Enable */
 	{ 0x00000442, 0x3F0A },   /* R1090  - DRE Control 2 */
 	{ 0x00000443, 0xDC1F },   /* R1090  - DRE Control 3 */
 	{ 0x00000450, 0x0000 },   /* R1104  - DAC AEC Control 1 */ 
@@ -863,7 +861,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000C0F, 0x0400 },   /* R3087  - IRQ CTRL 1 */ 
 	{ 0x00000C10, 0x1000 },   /* R3088  - GPIO Debounce Config */ 
 	{ 0x00000C20, 0x8002 },   /* R3104  - Misc Pad Ctrl 1 */ 
-	{ 0x00000C21, 0x8001 },   /* R3105  - Misc Pad Ctrl 2 */ 
+	{ 0x00000C21, 0x0001 },   /* R3105  - Misc Pad Ctrl 2 */
 	{ 0x00000C22, 0x0000 },   /* R3106  - Misc Pad Ctrl 3 */ 
 	{ 0x00000C23, 0x0000 },   /* R3107  - Misc Pad Ctrl 4 */ 
 	{ 0x00000C24, 0x0000 },   /* R3108  - Misc Pad Ctrl 5 */ 
@@ -984,7 +982,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000ECD, 0x0000 },   /* R3789  - HPLPF4_2 */ 
 	{ 0x00000EE0, 0x0000 },   /* R3808  - ASRC_ENABLE */ 
 	{ 0x00000EE2, 0x0000 },   /* R3810  - ASRC_RATE1 */ 
-	{ 0x00000EE3, 0x0400 },   /* R3811  - ASRC_RATE2 */
+	{ 0x00000EE3, 0x4000 },   /* R3811  - ASRC_RATE2 */
 	{ 0x00000EF0, 0x0000 },   /* R3824  - ISRC 1 CTRL 1 */ 
 	{ 0x00000EF1, 0x0000 },   /* R3825  - ISRC 1 CTRL 2 */ 
 	{ 0x00000EF2, 0x0000 },   /* R3826  - ISRC 1 CTRL 3 */ 
@@ -1062,8 +1060,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_4:
 	case ARIZONA_FLL1_CONTROL_5:
 	case ARIZONA_FLL1_CONTROL_6:
-	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL1_CONTROL_7:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:
@@ -1080,8 +1076,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_4:
 	case ARIZONA_FLL2_CONTROL_5:
 	case ARIZONA_FLL2_CONTROL_6:
-	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_FLL2_CONTROL_7:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:
@@ -1849,8 +1843,6 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_HAPTICS_STATUS:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
-	case ARIZONA_FLL1_NCO_TEST_0:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_DAC_COMP_1:
 	case ARIZONA_DAC_COMP_2:
 	case ARIZONA_DAC_COMP_3: