Merge branch 'picoxcell/devel' into next/devel

* picoxcell/devel: (1 commit)
  ARM: picoxcell: implement watchdog restart

Documentation/arm/memory.txt

@@ -51,15 +51,14 @@ ffc00000	ffefffff	DMA memory mapping region.  Memory returned
 ff000000	ffbfffff	Reserved for future expansion of DMA
 				mapping region.
 
-VMALLOC_END	feffffff	Free for platform use, recommended.
-				VMALLOC_END must be aligned to a 2MB
-				boundary.
-
 VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
 				Memory returned by vmalloc/ioremap will
 				be dynamically placed in this region.
-				VMALLOC_START may be based upon the value
-				of the high_memory variable.
+				Machine specific static mappings are also
+				located here through iotable_init().
+				VMALLOC_START is based upon the value
+				of the high_memory variable, and VMALLOC_END
+				is equal to 0xff000000.
 
 PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.
 				This maps the platforms RAM, and typically

Documentation/devicetree/bindings/arm/gic.txt

@@ -42,6 +42,10 @@ Optional
 - interrupts	: Interrupt source of the parent interrupt controller. Only
   present on secondary GICs.
 
+- cpu-offset	: per-cpu offset within the distributor and cpu interface
+  regions, used when the GIC doesn't have banked registers. The offset is
+  cpu-offset * cpu-nr.
+
 Example:
 
 	intc: interrupt-controller@fff11000 {

Documentation/devicetree/bindings/arm/vic.txt

+* ARM Vectored Interrupt Controller
+
+One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
+system for interrupt routing.  For multiple controllers they can either be
+nested or have the outputs wire-OR'd together.
+
+Required properties:
+
+- compatible : should be one of
+	"arm,pl190-vic"
+	"arm,pl192-vic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as
+  the VIC has no configuration options for interrupt sources.  The cell is a u32
+  and defines the interrupt number.
+- reg : The register bank for the VIC.
+
+Optional properties:
+
+- interrupts : Interrupt source for parent controllers if the VIC is nested.
+
+Example:
+
+	vic0: interrupt-controller@60000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x60000 0x1000>;
+	};

MAINTAINERS

@@ -5117,6 +5117,15 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/phram.c
 
+PICOXCELL SUPPORT
+M:	Jamie Iles <jamie@jamieiles.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://github.com/jamieiles/linux-2.6-ji.git
+S:	Supported
+F:	arch/arm/mach-picoxcell
+F:	drivers/*/picoxcell*
+F:	drivers/*/*/picoxcell*
+
 PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained

arch/arm/Kconfig

@@ -650,6 +650,7 @@ config ARCH_PICOXCELL
 	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select NO_IOPORT
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  This enables support for systems based on the Picochip picoXcell
@@ -1971,7 +1972,7 @@ endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM
+	depends on !ZBOOT_ROM && !ARM_LPAE
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2001,7 +2002,7 @@ config XIP_PHYS_ADDR
 
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/arm/boot/compressed/head.S

@@ -659,6 +659,7 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 #endif
+		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0

arch/arm/common/Kconfig

 config ARM_GIC
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+	bool
+
+config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	bool
 
 config ARM_VIC_NR

arch/arm/common/gic.c

@@ -40,13 +40,36 @@
 #include <linux/slab.h>
 
 #include <asm/irq.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+union gic_base {
+	void __iomem *common_base;
+	void __percpu __iomem **percpu_base;
+};
 
-/* Address of GIC 0 CPU interface */
-void __iomem *gic_cpu_base_addr __read_mostly;
+struct gic_chip_data {
+	unsigned int irq_offset;
+	union gic_base dist_base;
+	union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+	u32 __percpu *saved_ppi_enable;
+	u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+	struct irq_domain domain;
+#endif
+	unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+	void __iomem *(*get_base)(union gic_base *);
+#endif
+};
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
 /*
  * Supported arch specific GIC irq extension.
@@ -67,16 +90,48 @@ struct irq_chip gic_arch_extn = {
 
 static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
 
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+	return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+	return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+					 void __iomem *(*f)(union gic_base *))
+{
+	data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d)	((d)->dist_base.common_base)
+#define gic_data_cpu_base(d)	((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
 static inline void __iomem *gic_dist_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data->dist_base;
+	return gic_data_dist_base(gic_data);
 }
 
 static inline void __iomem *gic_cpu_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data->cpu_base;
+	return gic_data_cpu_base(gic_data);
 }
 
 static inline unsigned int gic_irq(struct irq_data *d)
@@ -215,6 +270,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on)
 #define gic_set_wake	NULL
 #endif
 
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+	struct gic_chip_data *gic = &gic_data[0];
+	void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+	do {
+		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+		irqnr = irqstat & ~0x1c00;
+
+		if (likely(irqnr > 15 && irqnr < 1021)) {
+			irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		if (irqnr < 16) {
+			writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+			handle_IPI(irqnr, regs);
+#endif
+			continue;
+		}
+		break;
+	} while (1);
+}
+
 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct gic_chip_data *chip_data = irq_get_handler_data(irq);
@@ -225,7 +306,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	raw_spin_lock(&irq_controller_lock);
-	status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
+	status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
 	raw_spin_unlock(&irq_controller_lock);
 
 	gic_irq = (status & 0x3ff);
@@ -270,7 +351,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	u32 cpumask;
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
-	void __iomem *base = gic->dist_base;
+	void __iomem *base = gic_data_dist_base(gic);
 	u32 cpu = 0;
 
 #ifdef CONFIG_SMP
@@ -330,8 +411,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 
 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 {
-	void __iomem *dist_base = gic->dist_base;
-	void __iomem *base = gic->cpu_base;
+	void __iomem *dist_base = gic_data_dist_base(gic);
+	void __iomem *base = gic_data_cpu_base(gic);
 	int i;
 
 	/*
@@ -368,7 +449,7 @@ static void gic_dist_save(unsigned int gic_nr)
 		BUG();
 
 	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data[gic_nr].dist_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
 	if (!dist_base)
 		return;
@@ -403,7 +484,7 @@ static void gic_dist_restore(unsigned int gic_nr)
 		BUG();
 
 	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data[gic_nr].dist_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
 	if (!dist_base)
 		return;
@@ -439,8 +520,8 @@ static void gic_cpu_save(unsigned int gic_nr)
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
-	dist_base = gic_data[gic_nr].dist_base;
-	cpu_base = gic_data[gic_nr].cpu_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
 	if (!dist_base || !cpu_base)
 		return;
@@ -465,8 +546,8 @@ static void gic_cpu_restore(unsigned int gic_nr)
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
-	dist_base = gic_data[gic_nr].dist_base;
-	cpu_base = gic_data[gic_nr].cpu_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
 	if (!dist_base || !cpu_base)
 		return;
@@ -491,6 +572,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
 	int i;
 
 	for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+		/* Skip over unused GICs */
+		if (!gic_data[i].get_base)
+			continue;
+#endif
 		switch (cmd) {
 		case CPU_PM_ENTER:
 			gic_cpu_save(i);
@@ -564,8 +650,9 @@ const struct irq_domain_ops gic_irq_domain_ops = {
 #endif
 };
 
-void __init gic_init(unsigned int gic_nr, int irq_start,
-	void __iomem *dist_base, void __iomem *cpu_base)
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+			   void __iomem *dist_base, void __iomem *cpu_base,
+			   u32 percpu_offset)
 {
 	struct gic_chip_data *gic;
 	struct irq_domain *domain;
@@ -575,8 +662,36 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 
 	gic = &gic_data[gic_nr];
 	domain = &gic->domain;
-	gic->dist_base = dist_base;
-	gic->cpu_base = cpu_base;
+#ifdef CONFIG_GIC_NON_BANKED
+	if (percpu_offset) { /* Frankein-GIC without banked registers... */
+		unsigned int cpu;
+
+		gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+		gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+		if (WARN_ON(!gic->dist_base.percpu_base ||
+			    !gic->cpu_base.percpu_base)) {
+			free_percpu(gic->dist_base.percpu_base);
+			free_percpu(gic->cpu_base.percpu_base);
+			return;
+		}
+
+		for_each_possible_cpu(cpu) {
+			unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+			*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+			*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+		}
+
+		gic_set_base_accessor(gic, gic_get_percpu_base);
+	} else
+#endif
+	{			/* Normal, sane GIC... */
+		WARN(percpu_offset,
+		     "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+		     percpu_offset);
+		gic->dist_base.common_base = dist_base;
+		gic->cpu_base.common_base = cpu_base;
+		gic_set_base_accessor(gic, gic_get_common_base);
+	}
 
 	/*
 	 * For primary GICs, skip over SGIs.
@@ -584,8 +699,6 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 	 */
 	domain->hwirq_base = 32;
 	if (gic_nr == 0) {
-		gic_cpu_base_addr = cpu_base;
-
 		if ((irq_start & 31) > 0) {
 			domain->hwirq_base = 16;
 			if (irq_start != -1)
@@ -597,7 +710,7 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
-	gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
 	gic_irqs = (gic_irqs + 1) * 32;
 	if (gic_irqs > 1020)
 		gic_irqs = 1020;
@@ -645,7 +758,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	dsb();
 
 	/* this always happens on GIC0 */
-	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 }
 #endif
 
@@ -656,6 +769,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *cpu_base;
 	void __iomem *dist_base;
+	u32 percpu_offset;
 	int irq;
 	struct irq_domain *domain = &gic_data[gic_cnt].domain;
 
@@ -668,9 +782,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 	cpu_base = of_iomap(node, 1);
 	WARN(!cpu_base, "unable to map gic cpu registers\n");
 
+	if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
 	domain->of_node = of_node_get(node);
 
-	gic_init(gic_cnt, -1, dist_base, cpu_base);
+	gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
 
 	if (parent) {
 		irq = irq_of_parse_and_map(node, 0);

arch/arm/common/vic.c

@@ -19,17 +19,22 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-#ifdef CONFIG_PM
 /**
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
@@ -40,6 +45,7 @@
  * @int_enable: Save for VIC_INT_ENABLE.
  * @soft_int: Save for VIC_INT_SOFT.
  * @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
  */
 struct vic_device {
 	void __iomem	*base;
@@ -50,13 +56,13 @@ struct vic_device {
 	u32		int_enable;
 	u32		soft_int;
 	u32		protect;
+	struct irq_domain domain;
 };
 
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
-#endif /* CONFIG_PM */
 
 /**
  * vic_init2 - common initialisation code
@@ -156,39 +162,50 @@ static int __init vic_pm_init(void)
 	return 0;
 }
 late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
 
 /**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
  * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
  *
  * Register the VIC with the system device tree so that it can be notified
  * of suspend and resume requests and ensure that the correct actions are
  * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
  */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+				u32 resume_sources, struct device_node *node)
 {
 	struct vic_device *v;
 
-	if (vic_id >= ARRAY_SIZE(vic_devices))
+	if (vic_id >= ARRAY_SIZE(vic_devices)) {
 		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-	else {
-		v = &vic_devices[vic_id];
-		v->base = base;
-		v->resume_sources = resume_sources;
-		v->irq = irq;
-		vic_id++;
+		return;
 	}
+
+	v = &vic_devices[vic_id];
+	v->base = base;
+	v->resume_sources = resume_sources;
+	v->irq = irq;
+	vic_id++;
+
+	v->domain.irq_base = irq;
+	v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+	v->domain.of_node = of_node_get(node);
+	v->domain.ops = &irq_domain_simple_ops;
+#endif /* CONFIG_OF */
+	irq_domain_add(&v->domain);
 }
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
 
 static void vic_ack_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 	/* moreover, clear the soft-triggered, in case it was the reason */
 	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
@@ -197,14 +214,14 @@ static void vic_ack_irq(struct irq_data *d)
 static void vic_mask_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 
 static void vic_unmask_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
@@ -226,7 +243,7 @@ static struct vic_device *vic_from_irq(unsigned int irq)
 static int vic_set_wake(struct irq_data *d, unsigned int on)
 {
 	struct vic_device *v = vic_from_irq(d->irq);
-	unsigned int off = d->irq & 31;
+	unsigned int off = d->hwirq;
 	u32 bit = 1 << off;
 
 	if (!v)
@@ -301,7 +318,7 @@ static void __init vic_set_irq_sources(void __iomem *base,
  *  and 020 within the page. We call this "second block".
  */
 static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
-				u32 vic_sources)
+			       u32 vic_sources, struct device_node *node)
 {
 	unsigned int i;
 	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
@@ -328,17 +345,12 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 	}
 
 	vic_set_irq_sources(base, irq_start, vic_sources);
+	vic_register(base, irq_start, 0, node);
 }
 
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+			      u32 vic_sources, u32 resume_sources,
+			      struct device_node *node)
 {
 	unsigned int i;
 	u32 cellid = 0;
@@ -356,7 +368,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	switch(vendor) {
 	case AMBA_VENDOR_ST:
-		vic_init_st(base, irq_start, vic_sources);
+		vic_init_st(base, irq_start, vic_sources, node);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
@@ -375,5 +387,81 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_set_irq_sources(base, irq_start, vic_sources);
 
-	vic_pm_register(base, irq_start, resume_sources);
+	vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+		     u32 vic_sources, u32 resume_sources)
+{
+	__vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+	void __iomem *regs;
+	int irq_base;
+
+	if (WARN(parent, "non-root VICs are not supported"))
+		return -EINVAL;
+
+	regs = of_iomap(node, 0);
+	if (WARN_ON(!regs))
+		return -EIO;
+
+	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+	if (WARN_ON(irq_base < 0))
+		goto out_unmap;
+
+	__vic_init(regs, irq_base, ~0, ~0, node);
+
+	return 0;
+
+ out_unmap:
+	iounmap(regs);
+
+	return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+	u32 stat, irq;
+	int handled = 0;
+
+	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+	while (stat) {
+		irq = ffs(stat) - 1;
+		handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+		stat &= ~(1 << irq);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+	int i, handled;
+
+	do {
+		for (i = 0, handled = 0; i < vic_id; ++i)
+			handled |= handle_one_vic(&vic_devices[i], regs);
+	} while (handled);
 }

arch/arm/include/asm/assembler.h

@@ -186,6 +186,17 @@
 #define ALT_UP_B(label) b label
 #endif
 
+/*
+ * Instruction barrier
+ */
+	.macro	instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+	isb
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c5, 4
+#endif
+	.endm
+
 /*
  * SMP data memory barrier
  */

arch/arm/include/asm/cti.h

+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include	<asm/io.h>
+
+/* The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ */
+#define		CTICONTROL		0x000
+#define		CTISTATUS		0x004
+#define		CTILOCK			0x008
+#define		CTIPROTECTION		0x00C
+#define		CTIINTACK		0x010
+#define		CTIAPPSET		0x014
+#define		CTIAPPCLEAR		0x018
+#define		CTIAPPPULSE		0x01c
+#define		CTIINEN			0x020
+#define		CTIOUTEN		0x0A0
+#define		CTITRIGINSTATUS		0x130
+#define		CTITRIGOUTSTATUS	0x134
+#define		CTICHINSTATUS		0x138
+#define		CTICHOUTSTATUS		0x13c
+#define		CTIPERIPHID0		0xFE0
+#define		CTIPERIPHID1		0xFE4
+#define		CTIPERIPHID2		0xFE8
+#define		CTIPERIPHID3		0xFEC
+#define		CTIPCELLID0		0xFF0
+#define		CTIPCELLID1		0xFF4
+#define		CTIPCELLID2		0xFF8
+#define		CTIPCELLID3		0xFFC
+
+/* The below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ */
+#define		LOCKACCESS		0xFB0
+#define		LOCKSTATUS		0xFB4
+
+/* write this value to LOCKACCESS will unlock the module, and
+ * other value will lock the module
+ */
+#define		LOCKCODE		0xC5ACCE55
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ *	the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+	void __iomem *base;
+	int irq;
+	int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ *	the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+	void __iomem *base, int irq, int trig_out)
+{
+	cti->base = base;
+	cti->irq  = irq;
+	cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+	int trig_in, int trig_out, int chan)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + CTIINEN + trig_in * 4);
+	val |= BIT(chan);
+	__raw_writel(val, base + CTIINEN + trig_in * 4);
+
+	val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+	val |= BIT(chan);
+	__raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+	__raw_writel(0x1, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+	__raw_writel(0, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + CTIINTACK);
+	val |= BIT(cti->trig_out_for_irq);
+	__raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + LOCKSTATUS);
+
+	if (val & 1) {
+		val = LOCKCODE;
+		__raw_writel(val, base + LOCKACCESS);
+	}
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + LOCKSTATUS);
+
+	if (!(val & 1)) {
+		val = ~LOCKCODE;
+		__raw_writel(val, base + LOCKACCESS);
+	}
+}
+#endif

arch/arm/include/asm/entry-macro-vic2.S

-/* arch/arm/include/asm/entry-macro-vic2.S
- *
- * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for a device with two VICs
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* This should be included from <mach/entry-macro.S> with the necessary
- * defines for virtual addresses and IRQ bases for the two vics.
- *
- * The code needs the following defined:
- *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
- *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
- *	VA_VIC0		Virtual address of VIC0
- *	VA_VIC1		Virtual address of VIC1
- *
- * Note, code assumes VIC0's virtual address is an ARM immediate constant
- * away from VIC1.
-*/
-
-#include <asm/hardware/vic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, #IRQ_VIC0_BASE + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm

arch/arm/include/asm/hardware/entry-macro-gic.S

-/*
- * arch/arm/include/asm/hardware/entry-macro-gic.S
- *
- * Low-level IRQ helper macros for GIC
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/gic.h>
-
-#ifndef HAVE_GET_IRQNR_PREAMBLE
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =gic_cpu_base_addr
-	ldr	\base, [\base]
-	.endm
-#endif
-
-/*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec.  To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-31 are local.  We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt.  We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-	/* bits 12-10 = src CPU, 9-0 = int # */
-
-	ldr	\tmp, =1021
-	bic     \irqnr, \irqstat, #0x1c00
-	cmp     \irqnr, #15
-	cmpcc	\irqnr, \irqnr
-	cmpne	\irqnr, \tmp
-	cmpcs	\irqnr, \irqnr
-	.endm
-
-/* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	cmp	\irqnr, #16
-	strcc	\irqstat, [\base, #GIC_CPU_EOI]
-	cmpcs	\irqnr, \irqnr
-	.endm

arch/arm/include/asm/hardware/gic.h

@@ -36,30 +36,22 @@
 #include <linux/irqdomain.h>
 struct device_node;
 
-extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
-void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
+		    u32 offset);
 int gic_of_init(struct device_node *node, struct device_node *parent);
 void gic_secondary_init(unsigned int);
+void gic_handle_irq(struct pt_regs *regs);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 
-struct gic_chip_data {
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-#ifdef CONFIG_CPU_PM
-	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
-	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
-	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
-	u32 __percpu *saved_ppi_enable;
-	u32 __percpu *saved_ppi_conf;
-#endif
-#ifdef CONFIG_IRQ_DOMAIN
-	struct irq_domain domain;
-#endif
-	unsigned int gic_irqs;
-};
+static inline void gic_init(unsigned int nr, int start,
+			    void __iomem *dist , void __iomem *cpu)
+{
+	gic_init_bases(nr, start, dist, cpu, 0);
+}
+
 #endif
 
 #endif

arch/arm/include/asm/hardware/vic.h

@@ -41,7 +41,15 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+struct device_node;
+struct pt_regs;
+
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-#endif
+int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
 
+#endif /* __ASSEMBLY__ */
 #endif

arch/arm/include/asm/idmap.h

+#ifndef __ASM_IDMAP_H
+#define __ASM_IDMAP_H
+
+#include <linux/compiler.h>
+#include <asm/pgtable.h>
+
+/* Tag a function as requiring to be executed via an identity mapping. */
+#define __idmap __section(.idmap.text) noinline notrace
+
+extern pgd_t *idmap_pgd;
+
+void setup_mm_for_reboot(void);
+
+#endif	/* __ASM_IDMAP_H */

arch/arm/include/asm/mach/arch.h

@@ -31,10 +31,10 @@ struct machine_desc {
 	unsigned int		video_start;	/* start of video RAM	*/
 	unsigned int		video_end;	/* end of video RAM	*/
 
-	unsigned int		reserve_lp0 :1;	/* never has lp0	*/
-	unsigned int		reserve_lp1 :1;	/* never has lp1	*/
-	unsigned int		reserve_lp2 :1;	/* never has lp2	*/
-	unsigned int		soft_reboot :1;	/* soft reboot		*/
+	unsigned char		reserve_lp0 :1;	/* never has lp0	*/
+	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
+	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
+	char			restart_mode;	/* default restart mode	*/
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
 	void			(*reserve)(void);/* reserve mem blocks	*/
@@ -46,6 +46,7 @@ struct machine_desc {
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif
+	void			(*restart)(char, const char *);
 };
 
 /*

arch/arm/include/asm/page.h

@@ -151,7 +151,11 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-types.h>
+#else
 #include <asm/pgtable-2level-types.h>
+#endif
 
 #endif /* CONFIG_MMU */
 

arch/arm/include/asm/perf_event.h

@@ -32,7 +32,4 @@ enum arm_perf_pmu_ids {
 extern enum arm_perf_pmu_ids
 armpmu_get_pmu_id(void);
 
-extern int
-armpmu_get_max_events(void);
-
 #endif /* __ARM_PERF_EVENT_H__ */

arch/arm/include/asm/pgalloc.h

@@ -25,12 +25,34 @@
 #define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
 #define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
 
+#ifdef CONFIG_ARM_LPAE
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+}
+
+#else	/* !CONFIG_ARM_LPAE */
+
 /*
  * Since we have only two-level page tables, these are trivial
  */
 #define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, pmd)		do { } while (0)
-#define pgd_populate(mm,pmd,pte)	BUG()
+#define pud_populate(mm,pmd,pte)	BUG()
+
+#endif	/* CONFIG_ARM_LPAE */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
@@ -109,7 +131,9 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
 {
 	pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
 	pmdp[0] = __pmd(pmdval);
+#ifndef CONFIG_ARM_LPAE
 	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+#endif
 	flush_pmd_entry(pmdp);
 }
 

arch/arm/include/asm/pgtable-2level.h

@@ -140,4 +140,45 @@
 #define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
 #define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
 
+#ifndef __ASSEMBLY__
+
+/*
+ * The "pud_xxx()" functions here are trivial when the pmd is folded into
+ * the pud: the pud entry is never bad, always exists, and can't be set or
+ * cleared.
+ */
+#define pud_none(pud)		(0)
+#define pud_bad(pud)		(0)
+#define pud_present(pud)	(1)
+#define pud_clear(pudp)		do { } while (0)
+#define set_pud(pud,pudp)	do { } while (0)
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+	return (pmd_t *)pud;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* _ASM_PGTABLE_2LEVEL_H */

arch/arm/include/asm/pgtable-3level-hwdef.h

+/*
+ * arch/arm/include/asm/pgtable-3level-hwdef.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H
+#define _ASM_PGTABLE_3LEVEL_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1/2 descriptor
+ *   - common
+ */
+#define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_FAULT		(_AT(pmdval_t, 0) << 0)
+#define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT		(_AT(pmdval_t, 1) << 0)
+#define PMD_BIT4		(_AT(pmdval_t, 0))
+#define PMD_DOMAIN(x)		(_AT(pmdval_t, 0))
+
+/*
+ *   - section
+ */
+#define PMD_SECT_BUFFERABLE	(_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_CACHEABLE	(_AT(pmdval_t, 1) << 3)
+#define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_nG		(_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_AP_WRITE	(_AT(pmdval_t, 0))
+#define PMD_SECT_AP_READ	(_AT(pmdval_t, 0))
+#define PMD_SECT_TEX(x)		(_AT(pmdval_t, 0))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_SECT_UNCACHED	(_AT(pmdval_t, 0) << 2)	/* strongly ordered */
+#define PMD_SECT_BUFFERED	(_AT(pmdval_t, 1) << 2)	/* normal non-cacheable */
+#define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
+#define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
+#define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
+
+/*
+ * + Level 3 descriptor (PTE)
+ */
+#define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_FAULT		(_AT(pteval_t, 0) << 0)
+#define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
+#define PTE_BUFFERABLE		(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
+#define PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
+#define PTE_EXT_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
+#define PTE_EXT_AF		(_AT(pteval_t, 1) << 10)	/* Access Flag */
+#define PTE_EXT_NG		(_AT(pteval_t, 1) << 11)	/* nG */
+#define PTE_EXT_XN		(_AT(pteval_t, 1) << 54)	/* XN */
+
+/*
+ * 40-bit physical address supported.
+ */
+#define PHYS_MASK_SHIFT		(40)
+#define PHYS_MASK		((1ULL << PHYS_MASK_SHIFT) - 1)
+
+#endif

arch/arm/include/asm/pgtable-3level-types.h

+/*
+ * arch/arm/include/asm/pgtable-3level-types.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H
+#define _ASM_PGTABLE_3LEVEL_TYPES_H
+
+#include <asm/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pgdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pmdval_t pmd; } pmd_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else	/* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pmdval_t pmd_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pmd(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif	/* STRICT_MM_TYPECHECKS */
+
+#endif	/* _ASM_PGTABLE_3LEVEL_TYPES_H */

arch/arm/include/asm/pgtable-3level.h

+/*
+ * arch/arm/include/asm/pgtable-3level.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_H
+#define _ASM_PGTABLE_3LEVEL_H
+
+/*
+ * With LPAE, there are 3 levels of page tables. Each level has 512 entries of
+ * 8 bytes each, occupying a 4K page. The first level table covers a range of
+ * 512GB, each entry representing 1GB. Since we are limited to 4GB input
+ * address range, only 4 entries in the PGD are used.
+ *
+ * There are enough spare bits in a page table entry for the kernel specific
+ * state.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		512
+#define PTRS_PER_PGD		4
+
+#define PTE_HWTABLE_PTRS	(PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF		(0)
+#define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT		30
+
+/*
+ * PMD_SHIFT determines the size a middle-level page table entry can map.
+ */
+#define PMD_SHIFT		21
+
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		21
+#define SECTION_SIZE		(1UL << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(PAGE_OFFSET / PGDIR_SIZE)
+
+/*
+ * "Linux" PTE definitions for LPAE.
+ *
+ * These bits overlap with the hardware bits but the naming is preserved for
+ * consistency with the classic page table format.
+ */
+#define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Valid */
+#define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
+#define L_PTE_BUFFERABLE	(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
+#define L_PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
+#define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
+#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
+#define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
+#define L_PTE_YOUNG		(_AT(pteval_t, 1) << 10)	/* AF */
+#define L_PTE_XN		(_AT(pteval_t, 1) << 54)	/* XN */
+#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)	/* unused */
+#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)	/* unused */
+
+/*
+ * To be used in assembly code with the upper page attributes.
+ */
+#define L_PTE_XN_HIGH		(1 << (54 - 32))
+#define L_PTE_DIRTY_HIGH	(1 << (55 - 32))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0) << 2)	/* strongly ordered */
+#define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 1) << 2)	/* normal non-cacheable */
+#define L_PTE_MT_WRITETHROUGH	(_AT(pteval_t, 2) << 2)	/* normal inner write-through */
+#define L_PTE_MT_WRITEBACK	(_AT(pteval_t, 3) << 2)	/* normal inner write-back */
+#define L_PTE_MT_WRITEALLOC	(_AT(pteval_t, 7) << 2)	/* normal inner write-alloc */
+#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 4) << 2)	/* device */
+#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 4) << 2)	/* device */
+#define L_PTE_MT_DEV_WC		(_AT(pteval_t, 1) << 2)	/* normal non-cacheable */
+#define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 3) << 2)	/* normal inner write-back */
+#define L_PTE_MT_MASK		(_AT(pteval_t, 7) << 2)
+
+/*
+ * Software PGD flags.
+ */
+#define L_PGD_SWAPPER		(_AT(pgdval_t, 1) << 55)	/* swapper_pg_dir entry */
+
+#ifndef __ASSEMBLY__
+
+#define pud_none(pud)		(!pud_val(pud))
+#define pud_bad(pud)		(!(pud_val(pud) & 2))
+#define pud_present(pud)	(pud_val(pud))
+
+#define pud_clear(pudp)			\
+	do {				\
+		*pudp = __pud(0);	\
+		clean_pmd_entry(pudp);	\
+	} while (0)
+
+#define set_pud(pudp, pud)		\
+	do {				\
+		*pudp = pud;		\
+		flush_pmd_entry(pudp);	\
+	} while (0)
+
+static inline pmd_t *pud_page_vaddr(pud_t pud)
+{
+	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+/* Find an entry in the second-level page table.. */
+#define pmd_index(addr)		(((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
+}
+
+#define pmd_bad(pmd)		(!(pmd_val(pmd) & 2))
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		*pmdpd = *pmdps;	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		*pmdp = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_3LEVEL_H */

arch/arm/include/asm/pgtable-hwdef.h

@@ -10,6 +10,10 @@
 #ifndef _ASMARM_PGTABLE_HWDEF_H
 #define _ASMARM_PGTABLE_HWDEF_H
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-hwdef.h>
+#else
 #include <asm/pgtable-2level-hwdef.h>
+#endif
 
 #endif

arch/arm/include/asm/pgtable.h

@@ -11,20 +11,24 @@
 #define _ASMARM_PGTABLE_H
 
 #include <linux/const.h>
-#include <asm-generic/4level-fixup.h>
 #include <asm/proc-fns.h>
 
 #ifndef CONFIG_MMU
 
+#include <asm-generic/4level-fixup.h>
 #include "pgtable-nommu.h"
 
 #else
 
+#include <asm-generic/pgtable-nopud.h>
 #include <asm/memory.h>
-#include <mach/vmalloc.h>
 #include <asm/pgtable-hwdef.h>
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level.h>
+#else
 #include <asm/pgtable-2level.h>
+#endif
 
 /*
  * Just any arbitrary offset to the start of the vmalloc VM area: the
@@ -33,14 +37,16 @@
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
  */
-#ifndef VMALLOC_START
 #define VMALLOC_OFFSET		(8*1024*1024)
 #define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END		0xff000000UL
+
+/* This is a temporary hack until shmobile's DMA area size is sorted out */
+#ifdef CONFIG_ARCH_SHMOBILE
+#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB"
+#undef VMALLOC_END
+#define VMALLOC_END		0xF6000000UL
 #endif
 
 #define LIBRARY_TEXT_START	0x0c000000
@@ -163,39 +169,8 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
 
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-#define set_pgd(pgd,pgdp)	do { } while (0)
-#define set_pud(pud,pudp)	do { } while (0)
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr)	((pmd_t *)(dir))
-
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define pmd_present(pmd)	(pmd_val(pmd))
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		pmdpd[0] = pmdps[0];	\
-		pmdpd[1] = pmdps[1];	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		pmdp[0] = __pmd(0);	\
-		pmdp[1] = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
 
 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 {
@@ -204,10 +179,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end)	(end)
-
-
 #ifndef CONFIG_HIGHPTE
 #define __pte_map(pmd)		pmd_page_vaddr(*(pmd))
 #define __pte_unmap(pte)	do { } while (0)
@@ -229,7 +200,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
 
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
 #if __LINUX_ARM_ARCH__ < 6
@@ -346,9 +316,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 #define pgtable_cache_init() do { } while (0)
 
-void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
-void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* CONFIG_MMU */

arch/arm/include/asm/pmu.h

@@ -27,13 +27,22 @@ enum arm_pmu_type {
 /*
  * struct arm_pmu_platdata - ARM PMU platform data
  *
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ *	interrupt and passed the address of the low level handler,
+ *	and can be used to implement any platform specific handling
+ *	before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ *	request_irq and be used to handle some platform specific
+ *	irq enablement
+ * @disable_irq: an optional handler which will be called before
+ *	free_irq and be used to handle some platform specific
+ *	irq disablement
  */
 struct arm_pmu_platdata {
 	irqreturn_t (*handle_irq)(int irq, void *dev,
 				  irq_handler_t pmu_handler);
+	void (*enable_irq)(int irq);
+	void (*disable_irq)(int irq);
 };
 
 #ifdef CONFIG_CPU_HAS_PMU

arch/arm/include/asm/proc-fns.h

@@ -65,7 +65,11 @@ extern struct processor {
 	 * Set a possibly extended PTE.  Non-extended PTEs should
 	 * ignore 'ext'.
 	 */
+#ifdef CONFIG_ARM_LPAE
+	void (*set_pte_ext)(pte_t *ptep, pte_t pte);
+#else
 	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
 
 	/* Suspend/resume */
 	unsigned int suspend_size;
@@ -79,7 +83,11 @@ extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
 extern void cpu_dcache_clean_area(void *, int);
 extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+#ifdef CONFIG_ARM_LPAE
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
+#else
 extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
 extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 
 /* These three are private to arch/arm/kernel/suspend.c */
@@ -107,6 +115,18 @@ extern void cpu_resume(void);
 
 #define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
 
+#ifdef CONFIG_ARM_LPAE
+#define cpu_get_pgd()	\
+	({						\
+		unsigned long pg, pg2;			\
+		__asm__("mrrc	p15, 0, %0, %1, c2"	\
+			: "=r" (pg), "=r" (pg2)		\
+			:				\
+			: "cc");			\
+		pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1);	\
+		(pgd_t *)phys_to_virt(pg);		\
+	})
+#else
 #define cpu_get_pgd()	\
 	({						\
 		unsigned long pg;			\
@@ -115,6 +135,7 @@ extern void cpu_resume(void);
 		pg &= ~0x3fff;				\
 		(pgd_t *)phys_to_virt(pg);		\
 	})
+#endif
 
 #endif
 

arch/arm/include/asm/system.h

@@ -80,6 +80,14 @@ struct siginfo;
 void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
 		unsigned long err, unsigned long trap);
 
+#ifdef CONFIG_ARM_LPAE
+#define FAULT_CODE_ALIGNMENT	33
+#define FAULT_CODE_DEBUG	34
+#else
+#define FAULT_CODE_ALIGNMENT	1
+#define FAULT_CODE_DEBUG	2
+#endif
+
 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
 		     int sig, int code, const char *name);
@@ -101,6 +109,7 @@ extern int __pure cpu_architecture(void);
 extern void cpu_init(void);
 
 void arm_machine_restart(char mode, const char *cmd);
+void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
 
 #define UDBG_UNDEFINED	(1 << 0)

arch/arm/include/asm/tlb.h

@@ -202,8 +202,18 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	tlb_remove_page(tlb, pte);
 }
 
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+				  unsigned long addr)
+{
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+	tlb_remove_page(tlb, virt_to_page(pmdp));
+#endif
+}
+
 #define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 

arch/arm/kernel/entry-armv.S

@@ -36,12 +36,11 @@
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
-	ldr	r1, [r1]
 	adr	lr, BSYM(9997f)
-	teq	r1, #0
-	movne	pc, r1
-#endif
+	ldr	pc, [r1]
+#else
 	arch_irq_handler_default
+#endif
 9997:
 	.endm
 

arch/arm/kernel/head.S

@@ -39,8 +39,14 @@
 #error KERNEL_RAM_VADDR must start at 0xXXXX8000
 #endif
 
+#ifdef CONFIG_ARM_LPAE
+	/* LPAE requires an additional page for the PGD */
+#define PG_DIR_SIZE	0x5000
+#define PMD_ORDER	3
+#else
 #define PG_DIR_SIZE	0x4000
 #define PMD_ORDER	2
+#endif
 
 	.globl	swapper_pg_dir
 	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
@@ -164,17 +170,36 @@ __create_page_tables:
 	teq	r0, r6
 	bne	1b
 
+#ifdef CONFIG_ARM_LPAE
+	/*
+	 * Build the PGD table (first level) to point to the PMD table. A PGD
+	 * entry is 64-bit wide.
+	 */
+	mov	r0, r4
+	add	r3, r4, #0x1000			@ first PMD table address
+	orr	r3, r3, #3			@ PGD block type
+	mov	r6, #4				@ PTRS_PER_PGD
+	mov	r7, #1 << (55 - 32)		@ L_PGD_SWAPPER
+1:	str	r3, [r0], #4			@ set bottom PGD entry bits
+	str	r7, [r0], #4			@ set top PGD entry bits
+	add	r3, r3, #0x1000			@ next PMD table
+	subs	r6, r6, #1
+	bne	1b
+
+	add	r4, r4, #0x1000			@ point to the PMD tables
+#endif
+
 	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
 	 * Create identity mapping to cater for __enable_mmu.
 	 * This identity mapping will be removed by paging_init().
 	 */
-	adr	r0, __enable_mmu_loc
+	adr	r0, __turn_mmu_on_loc
 	ldmia	r0, {r3, r5, r6}
 	sub	r0, r0, r3			@ virt->phys offset
-	add	r5, r5, r0			@ phys __enable_mmu
-	add	r6, r6, r0			@ phys __enable_mmu_end
+	add	r5, r5, r0			@ phys __turn_mmu_on
+	add	r6, r6, r0			@ phys __turn_mmu_on_end
 	mov	r5, r5, lsr #SECTION_SHIFT
 	mov	r6, r6, lsr #SECTION_SHIFT
 
@@ -219,8 +244,8 @@ __create_page_tables:
 #endif
 
 	/*
-	 * Then map boot params address in r2 or
-	 * the first 1MB of ram if boot params address is not specified.
+	 * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
+	 * of ram if boot params address is not specified.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	movs	r0, r0, lsl #SECTION_SHIFT
@@ -251,7 +276,15 @@ __create_page_tables:
 	mov	r3, r7, lsr #SECTION_SHIFT
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
+#ifdef CONFIG_ARM_LPAE
+	mov	r7, #1 << (54 - 32)		@ XN
+#else
+	orr	r3, r3, #PMD_SECT_XN
+#endif
 1:	str	r3, [r0], #4
+#ifdef CONFIG_ARM_LPAE
+	str	r7, [r0], #4
+#endif
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	blo	1b
@@ -282,15 +315,18 @@ __create_page_tables:
 	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
 	str	r3, [r0]
 #endif
+#endif
+#ifdef CONFIG_ARM_LPAE
+	sub	r4, r4, #0x1000		@ point to the PGD table
 #endif
 	mov	pc, lr
 ENDPROC(__create_page_tables)
 	.ltorg
 	.align
-__enable_mmu_loc:
+__turn_mmu_on_loc:
 	.long	.
-	.long	__enable_mmu
-	.long	__enable_mmu_end
+	.long	__turn_mmu_on
+	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
 	__CPUINIT
@@ -374,12 +410,17 @@ __enable_mmu:
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #CR_I
 #endif
+#ifdef CONFIG_ARM_LPAE
+	mov	r5, #0
+	mcrr	p15, 0, r4, r5, c2		@ load TTBR0
+#else
 	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
 		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
 		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
 		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
 	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+#endif
 	b	__turn_mmu_on
 ENDPROC(__enable_mmu)
 
@@ -398,15 +439,19 @@ ENDPROC(__enable_mmu)
  * other registers depend on the function called upon completion
  */
 	.align	5
-__turn_mmu_on:
+	.pushsection	.idmap.text, "ax"
+ENTRY(__turn_mmu_on)
 	mov	r0, r0
+	instr_sync
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
+	instr_sync
 	mov	r3, r3
 	mov	r3, r13
 	mov	pc, r3
-__enable_mmu_end:
+__turn_mmu_on_end:
 ENDPROC(__turn_mmu_on)
+	.popsection
 
 
 #ifdef CONFIG_SMP_ON_UP

arch/arm/kernel/hw_breakpoint.c

@@ -1016,10 +1016,10 @@ static int __init arch_hw_breakpoint_init(void)
 	}
 
 	/* Register debug fault handler. */
-	hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
-			"watchpoint debug exception");
-	hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
-			"breakpoint debug exception");
+	hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+			TRAP_HWBKPT, "watchpoint debug exception");
+	hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+			TRAP_HWBKPT, "breakpoint debug exception");
 
 	/* Register hotplug notifier. */
 	register_cpu_notifier(&dbg_reset_nb);

arch/arm/kernel/machine_kexec.c

@@ -12,12 +12,11 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
+#include <asm/system.h>
 
 extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
 
-extern void setup_mm_for_reboot(char mode);
-
 extern unsigned long kexec_start_address;
 extern unsigned long kexec_indirection_page;
 extern unsigned long kexec_mach_type;
@@ -111,14 +110,6 @@ void machine_kexec(struct kimage *image)
 
 	if (kexec_reinit)
 		kexec_reinit();
-	local_irq_disable();
-	local_fiq_disable();
-	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
-	flush_cache_all();
-	outer_flush_all();
-	outer_disable();
-	cpu_proc_fin();
-	outer_inv_all();
-	flush_cache_all();
-	cpu_reset(reboot_code_buffer_phys);
+
+	soft_restart(reboot_code_buffer_phys);
 }

arch/arm/kernel/perf_event.c

@@ -59,8 +59,7 @@ armpmu_get_pmu_id(void)
 }
 EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
 
-int
-armpmu_get_max_events(void)
+int perf_num_counters(void)
 {
 	int max_events = 0;
 
@@ -69,12 +68,6 @@ armpmu_get_max_events(void)
 
 	return max_events;
 }
-EXPORT_SYMBOL_GPL(armpmu_get_max_events);
-
-int perf_num_counters(void)
-{
-	return armpmu_get_max_events();
-}
 EXPORT_SYMBOL_GPL(perf_num_counters);
 
 #define HW_OP_UNSUPPORTED		0xFFFF
@@ -380,6 +373,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 {
 	int i, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
+	struct arm_pmu_platdata *plat =
+		dev_get_platdata(&pmu_device->dev);
 
 	irqs = min(pmu_device->num_resources, num_possible_cpus());
 
@@ -387,8 +382,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
 			continue;
 		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0)
+		if (irq >= 0) {
+			if (plat && plat->disable_irq)
+				plat->disable_irq(irq);
 			free_irq(irq, armpmu);
+		}
 	}
 
 	release_pmu(armpmu->type);
@@ -448,7 +446,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 				irq);
 			armpmu_release_hardware(armpmu);
 			return err;
-		}
+		} else if (plat && plat->enable_irq)
+			plat->enable_irq(irq);
 
 		cpumask_set_cpu(i, &armpmu->active_irqs);
 	}

arch/arm/kernel/perf_event_v6.c

@@ -65,13 +65,15 @@ enum armv6_counters {
  * accesses/misses in hardware.
  */
 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6_PERFCTR_IBUF_STALL,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6_PERFCTR_LSU_FULL_STALL,
 };
 
 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -218,13 +220,15 @@ enum armv6mpcore_perf_types {
  * accesses/misses in hardware.
  */
 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6MPCORE_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6MPCORE_PERFCTR_IBUF_STALL,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
 };
 
 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]

arch/arm/kernel/perf_event_xscale.c

@@ -48,13 +48,15 @@ enum xscale_counters {
 };
 
 static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= XSCALE_PERFCTR_CCNT,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= XSCALE_PERFCTR_INSTRUCTION,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= XSCALE_PERFCTR_BRANCH,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= XSCALE_PERFCTR_BRANCH_MISS,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= XSCALE_PERFCTR_ICACHE_NO_DELIVER,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
 };
 
 static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]

arch/arm/kernel/process.c

@@ -57,7 +57,7 @@ static const char *isa_modes[] = {
   "ARM" , "Thumb" , "Jazelle", "ThumbEE"
 };
 
-extern void setup_mm_for_reboot(char mode);
+extern void setup_mm_for_reboot(void);
 
 static volatile int hlt_counter;
 
@@ -92,18 +92,24 @@ static int __init hlt_setup(char *__unused)
 __setup("nohlt", nohlt_setup);
 __setup("hlt", hlt_setup);
 
-void arm_machine_restart(char mode, const char *cmd)
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+typedef void (*phys_reset_t)(unsigned long);
+
+/*
+ * A temporary stack to use for CPU reset. This is static so that we
+ * don't clobber it with the identity mapping. When running with this
+ * stack, any references to the current task *will not work* so you
+ * should really do as little as possible before jumping to your reset
+ * code.
+ */
+static u64 soft_restart_stack[16];
+
+static void __soft_restart(void *addr)
 {
-	/* Disable interrupts first */
-	local_irq_disable();
-	local_fiq_disable();
+	phys_reset_t phys_reset;
 
-	/*
-	 * Tell the mm system that we are going to reboot -
-	 * we may need it to insert some 1:1 mappings so that
-	 * soft boot works.
-	 */
-	setup_mm_for_reboot(mode);
+	/* Take out a flat memory mapping. */
+	setup_mm_for_reboot();
 
 	/* Clean and invalidate caches */
 	flush_cache_all();
@@ -114,18 +120,41 @@ void arm_machine_restart(char mode, const char *cmd)
 	/* Push out any further dirty data, and ensure cache is empty */
 	flush_cache_all();
 
-	/*
-	 * Now call the architecture specific reboot code.
-	 */
-	arch_reset(mode, cmd);
+	/* Switch to the identity mapping. */
+	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+	phys_reset((unsigned long)addr);
 
-	/*
-	 * Whoops - the architecture was unable to reboot.
-	 * Tell the user!
-	 */
-	mdelay(1000);
-	printk("Reboot failed -- System halted\n");
-	while (1);
+	/* Should never get here. */
+	BUG();
+}
+
+void soft_restart(unsigned long addr)
+{
+	u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
+
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
+
+	/* Disable the L2 if we're the last man standing. */
+	if (num_online_cpus() == 1)
+		outer_disable();
+
+	/* Change to the new stack and continue with the reset. */
+	call_with_stack(__soft_restart, (void *)addr, (void *)stack);
+
+	/* Should never get here. */
+	BUG();
+}
+
+void arm_machine_restart(char mode, const char *cmd)
+{
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
+
+	/* Call the architecture specific reboot code. */
+	arch_reset(mode, cmd);
 }
 
 /*
@@ -253,7 +282,15 @@ void machine_power_off(void)
 void machine_restart(char *cmd)
 {
 	machine_shutdown();
+
 	arm_pm_restart(reboot_mode, cmd);
+
+	/* Give a grace period for failure to restart of 1s */
+	mdelay(1000);
+
+	/* Whoops - the platform was unable to reboot. Tell the user! */
+	printk("Reboot failed -- System halted\n");
+	while (1);
 }
 
 void __show_regs(struct pt_regs *regs)

arch/arm/kernel/setup.c

@@ -31,6 +31,7 @@
 #include <linux/memblock.h>
 #include <linux/bug.h>
 #include <linux/compiler.h>
+#include <linux/sort.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -890,6 +891,12 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
 	return mdesc;
 }
 
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
 
 void __init setup_arch(char **cmdline_p)
 {
@@ -904,8 +911,8 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
-	if (mdesc->soft_reboot)
-		reboot_setup("s");
+	if (mdesc->restart_mode)
+		reboot_setup(&mdesc->restart_mode);
 
 	init_mm.start_code = (unsigned long) _text;
 	init_mm.end_code   = (unsigned long) _etext;
@@ -918,12 +925,16 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);
 	request_standard_resources(mdesc);
 
+	if (mdesc->restart)
+		arm_pm_restart = mdesc->restart;
+
 	unflatten_device_tree();
 
 #ifdef CONFIG_SMP

arch/arm/kernel/sleep.S

@@ -54,14 +54,18 @@ ENDPROC(cpu_suspend_abort)
  * r0 = control register value
  */
 	.align	5
+	.pushsection	.idmap.text,"ax"
 ENTRY(cpu_resume_mmu)
 	ldr	r3, =cpu_resume_after_mmu
+	instr_sync
 	mcr	p15, 0, r0, c1, c0, 0	@ turn on MMU, I-cache, etc
 	mrc	p15, 0, r0, c0, c0, 0	@ read id reg
+	instr_sync
 	mov	r0, r0
 	mov	r0, r0
 	mov	pc, r3			@ jump to virtual address
 ENDPROC(cpu_resume_mmu)
+	.popsection
 cpu_resume_after_mmu:
 	bl	cpu_init		@ restore the und/abt/irq banked regs
 	mov	r0, #0			@ return zero on success

arch/arm/kernel/smp.c

@@ -31,6 +31,7 @@
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/exception.h>
+#include <asm/idmap.h>
 #include <asm/topology.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
@@ -61,7 +62,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
 	struct task_struct *idle = ci->idle;
-	pgd_t *pgd;
 	int ret;
 
 	/*
@@ -83,30 +83,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 		init_idle(idle, cpu);
 	}
 
-	/*
-	 * Allocate initial page tables to allow the new CPU to
-	 * enable the MMU safely.  This essentially means a set
-	 * of our "standard" page tables, with the addition of
-	 * a 1:1 mapping for the physical address of the kernel.
-	 */
-	pgd = pgd_alloc(&init_mm);
-	if (!pgd)
-		return -ENOMEM;
-
-	if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
-		identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
-		identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
-		identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
-	}
-
 	/*
 	 * We need to tell the secondary core where to find
 	 * its stack and the page tables.
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
-	secondary_data.pgdir = virt_to_phys(pgd);
+	secondary_data.pgdir = virt_to_phys(idmap_pgd);
 	secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
 	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
 	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
@@ -142,16 +124,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
-		identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
-		identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
-		identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
-	}
-
-	pgd_free(&init_mm, pgd);
-
 	return ret;
 }
 
@@ -550,6 +522,10 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
+#ifdef CONFIG_HOTPLUG_CPU
+	platform_cpu_kill(cpu);
+#endif
+
 	while (1)
 		cpu_relax();
 }

arch/arm/kernel/suspend.c

 #include <linux/init.h>
 
+#include <asm/idmap.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/memory.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 
-static pgd_t *suspend_pgd;
-
 extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
 extern void cpu_resume_mmu(void);
 
@@ -21,7 +20,7 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
 	*save_ptr = virt_to_phys(ptr);
 
 	/* This must correspond to the LDM in cpu_resume() assembly */
-	*ptr++ = virt_to_phys(suspend_pgd);
+	*ptr++ = virt_to_phys(idmap_pgd);
 	*ptr++ = sp;
 	*ptr++ = virt_to_phys(cpu_do_resume);
 
@@ -42,7 +41,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	struct mm_struct *mm = current->active_mm;
 	int ret;
 
-	if (!suspend_pgd)
+	if (!idmap_pgd)
 		return -EINVAL;
 
 	/*
@@ -59,14 +58,3 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 
 	return ret;
 }
-
-static int __init cpu_suspend_init(void)
-{
-	suspend_pgd = pgd_alloc(&init_mm);
-	if (suspend_pgd) {
-		unsigned long addr = virt_to_phys(cpu_resume_mmu);
-		identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
-	}
-	return suspend_pgd ? 0 : -ENOMEM;
-}
-core_initcall(cpu_suspend_init);

arch/arm/kernel/vmlinux.lds.S

@@ -13,6 +13,12 @@
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
 
+#define IDMAP_TEXT							\
+	ALIGN_FUNCTION();						\
+	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
+	*(.idmap.text)							\
+	VMLINUX_SYMBOL(__idmap_text_end) = .;
+
 #ifdef CONFIG_HOTPLUG_CPU
 #define ARM_CPU_DISCARD(x)
 #define ARM_CPU_KEEP(x)		x
@@ -92,6 +98,7 @@ SECTIONS
 			SCHED_TEXT
 			LOCK_TEXT
 			KPROBES_TEXT
+			IDMAP_TEXT
 #ifdef CONFIG_MMU
 			*(.fixup)
 #endif

arch/arm/lib/Makefile

@@ -13,7 +13,8 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   testchangebit.o testclearbit.o testsetbit.o        \
 		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
 		   ucmpdi2.o lib1funcs.o div64.o                      \
-		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
+		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o  \
+		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
 

arch/arm/mach-netx/include/mach/vmalloc.h → arch/arm/lib/call_with_stack.S

 /*
- *  arch/arm/mach-netx/include/mach/vmalloc.h
+ * arch/arm/lib/call_with_stack.S
  *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (C) 2011 ARM Ltd.
+ * Written by Will Deacon <will.deacon@arm.com>
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -14,6 +15,30 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END       0xd0000000UL
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
+ *
+ * Change the stack to that pointed at by sp, then invoke fn(arg) with
+ * the new stack.
+ */
+ENTRY(call_with_stack)
+	str	sp, [r2, #-4]!
+	str	lr, [r2, #-4]!
+
+	mov	sp, r2
+	mov	r2, r0
+	mov	r0, r1
+
+	adr	lr, BSYM(1f)
+	mov	pc, r2
+
+1:	ldr	lr, [sp]
+	ldr	sp, [sp, #4]
+	mov	pc, lr
+ENDPROC(call_with_stack)

arch/arm/mach-at91/include/mach/io.h

@@ -30,14 +30,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifndef CONFIG_ARCH_AT91X40
-#define __arch_ioremap	at91_ioremap
-#define __arch_iounmap	at91_iounmap
-#endif
-
-void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type);
-void at91_iounmap(volatile void __iomem *addr);
-
 static inline unsigned int at91_sys_read(unsigned int reg_offset)
 {
 	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;

arch/arm/mach-at91/include/mach/vmalloc.h

-/*
- * arch/arm/mach-at91/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#include <mach/hardware.h>
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif

arch/arm/mach-at91/setup.c

@@ -73,24 +73,6 @@ static struct map_desc at91_io_desc __initdata = {
 	.type		= MT_DEVICE,
 };
 
-void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-	if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1))
-		return (void __iomem *)AT91_IO_P2V(p);
-
-	return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(at91_ioremap);
-
-void at91_iounmap(volatile void __iomem *addr)
-{
-	unsigned long virt = (unsigned long)addr;
-
-	if (virt >= VMALLOC_START && virt < VMALLOC_END)
-		__iounmap(addr);
-}
-EXPORT_SYMBOL(at91_iounmap);
-
 #define AT91_DBGU0	0xfffff200
 #define AT91_DBGU1	0xffffee00
 

arch/arm/mach-bcmring/dma.c

@@ -1615,7 +1615,7 @@ DMA_MemType_t dma_mem_type(void *addr)
 {
 	unsigned long addrVal = (unsigned long)addr;
 
-	if (addrVal >= VMALLOC_END) {
+	if (addrVal >= CONSISTENT_BASE) {
 		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
 
 		/* dma_alloc_xxx pages are physically and virtually contiguous */

arch/arm/mach-bcmring/include/mach/vmalloc.h

-/*
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
- * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
- * larger physical memory designs better.
- */
-#define VMALLOC_END       0xf0000000UL

arch/arm/mach-clps711x/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o
+obj-y			:= common.o
 obj-m			:=
 obj-n			:=
 obj-			:=

arch/arm/mach-clps711x/irq.c → arch/arm/mach-clps711x/common.c

 /*
- *  linux/arch/arm/mach-clps711x/irq.c
+ *  linux/arch/arm/mach-clps711x/core.c
  *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Core support for the CLPS711x-based machines.
+ *
+ *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,16 +19,42 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/list.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
 
-#include <asm/mach/irq.h>
+#include <asm/sizes.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-
+#include <asm/leds.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
 #include <asm/hardware/clps7111.h>
 
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+	{
+		.virtual	= CLPS7111_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init clps711x_map_io(void)
+{
+	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
 static void int1_mask(struct irq_data *d)
 {
 	u32 intmr1;
@@ -112,15 +140,15 @@ void __init clps711x_init_irq(void)
 
 	for (i = 0; i < NR_IRQS; i++) {
 	        if (INT1_IRQS & (1 << i)) {
-	        	irq_set_chip_and_handler(i, &int1_chip,
+			irq_set_chip_and_handler(i, &int1_chip,
 						 handle_level_irq);
-	        	set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		}
 		if (INT2_IRQS & (1 << i)) {
 			irq_set_chip_and_handler(i, &int2_chip,
 						 handle_level_irq);
 			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}			
+		}
 	}
 
 	/*
@@ -141,3 +169,54 @@ void __init clps711x_init_irq(void)
 	clps_writel(0, SYNCIO);
 	clps_writel(0, KBDEOI);
 }
+
+/*
+ * gettimeoffset() returns time since last timer tick, in usecs.
+ *
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy.
+ */
+static unsigned long clps711x_gettimeoffset(void)
+{
+	unsigned long hwticks;
+	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
+	return (hwticks * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+	return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+	.name		= "CLPS711x Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= p720t_timer_interrupt,
+};
+
+static void __init clps711x_timer_init(void)
+{
+	struct timespec tv;
+	unsigned int syscon;
+
+	syscon = clps_readl(SYSCON1);
+	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
+	clps_writel(syscon, SYSCON1);
+
+	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+
+	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = clps_readl(RTCDR);
+	do_settimeofday(&tv);
+}
+
+struct sys_timer clps711x_timer = {
+	.init		= clps711x_timer_init,
+	.offset		= clps711x_gettimeoffset,
+};

arch/arm/mach-clps711x/include/mach/system.h

@@ -34,7 +34,7 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	soft_restart(0);
 }
 
 #endif

arch/arm/mach-clps711x/include/mach/vmalloc.h

-/*
- *  arch/arm/mach-clps711x/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL

arch/arm/mach-clps711x/mm.c

-/*
- *  linux/arch/arm/mach-clps711x/mm.c
- *
- *  Generic MM setup for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= CLPS7111_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}

arch/arm/mach-clps711x/time.c

-/*
- *  linux/arch/arm/mach-clps711x/time.c
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-#include <asm/mach/time.h>
-
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
-	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
-	.name		= "CLPS711x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
-	struct timespec tv;
-	unsigned int syscon;
-
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
-
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
-	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = clps_readl(RTCDR);
-	do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-	.offset		= clps711x_gettimeoffset,
-};

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -201,5 +202,6 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.timer		= &cns3xxx_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= cns3420_init,
 MACHINE_END

arch/arm/mach-cns3xxx/include/mach/entry-macro.S

@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware/entry-macro-gic.S>
-
 		.macro	disable_fiq
 		.endm
 

arch/arm/mach-cns3xxx/include/mach/vmalloc.h

-/*
- * Copyright 2000 Russell King.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define VMALLOC_END		0xd8000000UL

arch/arm/mach-davinci/Makefile

@@ -4,7 +4,7 @@
 #
 
 # Common objects
-obj-y 			:= time.o clock.o serial.o io.o psc.o \
+obj-y 			:= time.o clock.o serial.o psc.o \
 			   dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o

arch/arm/mach-davinci/include/mach/io.h

@@ -21,12 +21,4 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#ifndef __ASSEMBLER__
-#define __arch_ioremap		davinci_ioremap
-#define __arch_iounmap		davinci_iounmap
-
-void __iomem *davinci_ioremap(unsigned long phys, size_t size,
-			      unsigned int type);
-void davinci_iounmap(volatile void __iomem *addr);
-#endif
 #endif /* __ASM_ARCH_IO_H */

arch/arm/mach-davinci/include/mach/vmalloc.h

-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <mach/hardware.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END	  (IO_VIRT - (2<<20))

arch/arm/mach-davinci/io.c

-/*
- * DaVinci I/O mapping code
- *
- * Copyright (C) 2005-2006 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-	struct map_desc *desc = davinci_soc_info.io_desc;
-	int desc_num = davinci_soc_info.io_desc_num;
-	int i;
-
-	for (i = 0; i < desc_num; i++, desc++) {
-		unsigned long iophys = __pfn_to_phys(desc->pfn);
-		unsigned long iosize = desc->length;
-
-		if (p >= iophys && (p + size) <= (iophys + iosize))
-			return __io(desc->virtual + p - iophys);
-	}
-
-	return __arm_ioremap_caller(p, size, type,
-					__builtin_return_address(0));
-}
-EXPORT_SYMBOL(davinci_ioremap);
-
-void davinci_iounmap(volatile void __iomem *addr)
-{
-	unsigned long virt = (unsigned long)addr;
-
-	if (virt >= VMALLOC_START && virt < VMALLOC_END)
-		__iounmap(addr);
-}
-EXPORT_SYMBOL(davinci_iounmap);

arch/arm/mach-dove/include/mach/dove.h

@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
-#include <mach/vmalloc.h>
-
 /*
  * Marvell Dove address maps.
  *

arch/arm/mach-dove/include/mach/vmalloc.h

-/*
- * arch/arm/mach-dove/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfd800000UL

arch/arm/mach-ebsa110/core.c

@@ -283,7 +283,7 @@ MACHINE_START(EBSA110, "EBSA110")
 	.atag_offset	= 0x400,
 	.reserve_lp0	= 1,
 	.reserve_lp2	= 1,
-	.soft_reboot	= 1,
+	.restart_mode	= 's',
 	.map_io		= ebsa110_map_io,
 	.init_irq	= ebsa110_init_irq,
 	.timer		= &ebsa110_timer,

arch/arm/mach-ebsa110/include/mach/system.h

@@ -34,6 +34,6 @@ static inline void arch_idle(void)
 	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
 }
 
-#define arch_reset(mode, cmd)	cpu_reset(0x80000000)
+#define arch_reset(mode, cmd)	soft_restart(0x80000000)
 
 #endif

arch/arm/mach-ebsa110/include/mach/vmalloc.h

-/*
- *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       0xdf000000UL

arch/arm/mach-ep93xx/adssphere.c

@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
 MACHINE_END

arch/arm/mach-ep93xx/edb93xx.c

@@ -39,6 +39,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -250,6 +251,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -261,6 +263,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -272,6 +275,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -283,6 +287,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -294,6 +299,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -305,6 +311,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -316,6 +323,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -327,6 +335,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END

arch/arm/mach-ep93xx/gesbc9312.c

@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
 MACHINE_END

arch/arm/mach-ep93xx/include/mach/entry-macro.S

@@ -9,51 +9,9 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-#include <mach/ep93xx-regs.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
-		orr	\base, \base, #0x000b0000
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base]		@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		eor	\base, \base, #0x00070000
-		ldr	\irqstat, [\base]		@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:
-		.endm

arch/arm/mach-ep93xx/include/mach/system.h

@@ -11,8 +11,6 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	local_irq_disable();
-
 	/*
 	 * Set then clear the SWRST bit to initiate a software reset
 	 */

arch/arm/mach-ep93xx/include/mach/vmalloc.h

-/*
- * arch/arm/mach-ep93xx/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000UL

arch/arm/mach-ep93xx/micro9.c

@@ -18,6 +18,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
@@ -91,6 +93,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
@@ -102,6 +105,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
@@ -113,6 +117,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END

arch/arm/mach-ep93xx/simone.c

@@ -25,6 +25,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= simone_init_machine,
 MACHINE_END

arch/arm/mach-ep93xx/snappercl15.c

@@ -31,6 +31,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -177,6 +178,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer 		= &ep93xx_timer,
 	.init_machine	= snappercl15_init_machine,
 MACHINE_END

arch/arm/mach-ep93xx/ts72xx.c

@@ -23,6 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/ts72xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -247,6 +248,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= ts72xx_init_machine,
 MACHINE_END

arch/arm/mach-exynos/cpu.c

@@ -15,6 +15,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/proc-fns.h>
+#include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 
@@ -33,8 +34,6 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
-unsigned int gic_bank_offset __read_mostly;
-
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -207,27 +206,14 @@ void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (gic_bank_offset * smp_processor_id());
-
-	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (gic_bank_offset * smp_processor_id());
-}
-
 void __init exynos4_init_irq(void)
 {
 	int irq;
+	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+	gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 

arch/arm/mach-exynos/include/mach/entry-macro.S

@@ -9,83 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\tmp, #0
-
-		mrc	p15, 0, \base, c0, c0, 5
-		and	\base, \base, #3
-		cmp	\base, #0
-		beq	1f
-
-		ldr	\tmp, =gic_bank_offset
-		ldr	\tmp, [\tmp]
-		cmp	\base, #1
-		beq	1f
-
-		cmp	\base, #2
-		addeq	\tmp, \tmp, \tmp
-		addne	\tmp, \tmp, \tmp, LSL #1
-
-1:		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		add	\base, \base, \tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #15
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-		addne	\irqnr, \irqnr, #32
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm

arch/arm/mach-exynos/include/mach/vmalloc.h

-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-exynos/mach-armlex4210.c

@@ -16,6 +16,7 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -210,6 +211,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END

arch/arm/mach-exynos/mach-nuri.c

@@ -32,6 +32,7 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
@@ -1333,6 +1334,7 @@ MACHINE_START(NURI, "NURI")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,

arch/arm/mach-exynos/mach-origen.c

@@ -22,6 +22,7 @@
 #include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -694,6 +695,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/backlight.h>
@@ -287,6 +288,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
@@ -297,6 +299,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END

arch/arm/mach-exynos/mach-smdkv310.c

@@ -21,6 +21,7 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -375,6 +376,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
@@ -385,6 +387,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END

arch/arm/mach-exynos/mach-universal_c210.c

@@ -24,6 +24,7 @@
 #include <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
@@ -1058,6 +1059,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,

arch/arm/mach-exynos/platsmp.c

@@ -32,7 +32,6 @@
 
 #include <plat/cpu.h>
 
-extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
-	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				(gic_bank_offset * smp_processor_id());
-	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(gic_bank_offset * smp_processor_id());
-	int i;
-
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	exynos4_gic_secondary_init();
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the

arch/arm/mach-footbridge/cats-hw.c

@@ -86,7 +86,7 @@ fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
 MACHINE_START(CATS, "Chalice-CATS")
 	/* Maintainer: Philip Blundell */
 	.atag_offset	= 0x100,
-	.soft_reboot	= 1,
+	.restart_mode	= 's',
 	.fixup		= fixup_cats,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,

arch/arm/mach-footbridge/include/mach/system.h

@@ -24,7 +24,7 @@ static inline void arch_reset(char mode, const char *cmd)
 		/*
 		 * Jump into the ROM
 		 */
-		cpu_reset(0x41000000);
+		soft_restart(0x41000000);
 	} else {
 		if (machine_is_netwinder()) {
 			/* open up the SuperIO chip

arch/arm/mach-footbridge/include/mach/vmalloc.h

-/*
- *  arch/arm/mach-footbridge/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END       0xf0000000UL

arch/arm/mach-gemini/include/mach/vmalloc.h

-/*
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#define VMALLOC_END	0xf0000000UL

arch/arm/mach-h720x/include/mach/vmalloc.h

-/*
- * arch/arm/mach-h720x/include/mach/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END       0xd0000000UL
-
-#endif

arch/arm/mach-highbank/highbank.c

@@ -144,6 +144,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
 	.map_io		= highbank_map_io,
 	.init_irq	= highbank_init_irq,
 	.timer		= &highbank_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 MACHINE_END

arch/arm/mach-highbank/include/mach/entry-macro.S

-#include <asm/hardware/entry-macro-gic.S>
-
 	.macro	disable_fiq
 	.endm
 

arch/arm/mach-highbank/include/mach/vmalloc.h

-#define VMALLOC_END		0xFEE00000UL

arch/arm/mach-integrator/include/mach/vmalloc.h

-/*
- *  arch/arm/mach-integrator/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL

arch/arm/mach-iop13xx/include/mach/vmalloc.h

-#ifndef _VMALLOC_H_
-#define _VMALLOC_H_
-#define VMALLOC_END 	0xfa000000UL
-#endif

arch/arm/mach-iop32x/include/mach/io.h

@@ -13,15 +13,8 @@
 
 #include <asm/hardware/iop3xx.h>
 
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
 #define IO_SPACE_LIMIT		0xffffffff
 #define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)		(a)
 
-#define __arch_ioremap	__iop3xx_ioremap
-#define __arch_iounmap	__iop3xx_iounmap
-
 #endif