Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
提交 45c091bb 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h
上级 d588fcbe 2191fe3e
展开全部 隐藏空白更改
内联 并排
Showing with 9825 addition and 3900 deletion
arch/powerpc/Kconfig
浏览文件 @ 45c091bb
......@@ -45,6 +45,10 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
config GENERIC_FIND_NEXT_BIT
bool
default y
config PPC
bool
default y
......@@ -137,6 +141,15 @@ config PPC_85xx
select FSL_SOC
select 85xx
config PPC_86xx
bool "Freescale 86xx"
select 6xx
select FSL_SOC
select PPC_FPU
select ALTIVEC
help
The Freescale E600 SoCs have 74xx cores.
config 40x
bool "AMCC 40x"
......@@ -336,7 +349,7 @@ endchoice
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool " IBM pSeries & new (POWER5-based) iSeries"
bool "IBM pSeries & new (POWER5-based) iSeries"
select PPC_I8259
select PPC_RTAS
select RTAS_ERROR_LOGGING
......@@ -344,7 +357,7 @@ config PPC_PSERIES
default y
config PPC_CHRP
bool " Common Hardware Reference Platform (CHRP) based machines"
bool "Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
select PPC_I8259
select PPC_INDIRECT_PCI
......@@ -354,7 +367,7 @@ config PPC_CHRP
default y
config PPC_PMAC
bool " Apple PowerMac based machines"
bool "Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
......@@ -370,7 +383,7 @@ config PPC_PMAC64
default y
config PPC_PREP
bool " PowerPC Reference Platform (PReP) based machines"
bool "PowerPC Reference Platform (PReP) based machines"
depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
select PPC_I8259
select PPC_INDIRECT_PCI
......@@ -379,7 +392,7 @@ config PPC_PREP
config PPC_MAPLE
depends on PPC_MULTIPLATFORM && PPC64
bool " Maple 970FX Evaluation Board"
bool "Maple 970FX Evaluation Board"
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
......@@ -391,8 +404,18 @@ config PPC_MAPLE
For more informations, refer to <http://www.970eval.com>
config PPC_CELL
bool " Cell Broadband Processor Architecture"
bool
default n
config PPC_CELL_NATIVE
bool
select PPC_CELL
default n
config PPC_IBM_CELL_BLADE
bool " IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL_NATIVE
select PPC_RTAS
select MMIO_NVRAM
select PPC_UDBG_16550
......@@ -439,11 +462,6 @@ config MPIC_BROKEN_U3
depends on PPC_MAPLE
default y
config CELL_IIC
depends on PPC_CELL
bool
default y
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
......@@ -545,6 +563,7 @@ source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
source arch/powerpc/platforms/83xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/86xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
source arch/powerpc/platforms/cell/Kconfig
......@@ -776,6 +795,7 @@ config GENERIC_ISA_DMA
config PPC_I8259
bool
default y if MPC8641_HPCN
default n
config PPC_INDIRECT_PCI
......@@ -798,8 +818,8 @@ config MCA
bool
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
......@@ -827,12 +847,12 @@ config PCI_8260
default y
config 8260_PCI9
bool " Enable workaround for MPC826x erratum PCI 9"
bool "Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260 && !ADS8272
default y
choice
prompt " IDMA channel for PCI 9 workaround"
prompt "IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
......@@ -849,6 +869,8 @@ config 8260_PCI9_IDMA4
endchoice
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
......
arch/powerpc/Kconfig.debug
浏览文件 @ 45c091bb
......@@ -110,13 +110,16 @@ config SERIAL_TEXT_DEBUG
depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
PPC_GEN550 || PPC_MPC52xx
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
choice
prompt "Early debugging (dangerous)"
bool
optional
prompt "Early debugging console"
depends on PPC_EARLY_DEBUG
help
Enable early debugging. Careful, if you enable debugging for the
wrong type of machine your kernel _will not boot_.
Use the selected console for early debugging. Careful, if you
enable debugging for the wrong type of machine your kernel
_will not boot_.
config PPC_EARLY_DEBUG_LPAR
bool "LPAR HV Console"
......
arch/powerpc/Makefile
浏览文件 @ 45c091bb
......@@ -108,7 +108,6 @@ ifeq ($(CONFIG_6xx),y)
CFLAGS += -mcpu=powerpc
endif
cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
......
arch/powerpc/boot/main.c
浏览文件 @ 45c091bb
......@@ -33,6 +33,14 @@ extern char _vmlinux_end[];
extern char _initrd_start[];
extern char _initrd_end[];
/* A buffer that may be edited by tools operating on a zImage binary so as to
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
*/
static char builtin_cmdline[512]
__attribute__((section("__builtin_cmdline")));
struct addr_range {
unsigned long addr;
unsigned long size;
......@@ -204,6 +212,23 @@ static int is_elf32(void *hdr)
return 1;
}
void export_cmdline(void* chosen_handle)
{
int len;
char cmdline[2] = { 0, 0 };
if (builtin_cmdline[0] == 0)
return;
len = getprop(chosen_handle, "bootargs", cmdline, sizeof(cmdline));
if (len > 0 && cmdline[0] != 0)
return;
setprop(chosen_handle, "bootargs", builtin_cmdline,
strlen(builtin_cmdline) + 1);
}
void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
{
int len;
......@@ -289,6 +314,8 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,vmlinuz.size);
}
export_cmdline(chosen_handle);
/* Skip over the ELF header */
#ifdef DEBUG
printf("... skipping 0x%lx bytes of ELF header\n\r",
......
arch/powerpc/boot/prom.h
浏览文件 @ 45c091bb
......@@ -31,4 +31,11 @@ static inline int getprop(void *phandle, const char *name,
return call_prom("getprop", 4, 1, phandle, name, buf, buflen);
}
static inline int setprop(void *phandle, const char *name,
void *buf, int buflen)
{
return call_prom("setprop", 4, 1, phandle, name, buf, buflen);
}
#endif /* _PPC_BOOT_PROM_H_ */
arch/powerpc/configs/cell_defconfig
浏览文件 @ 45c091bb
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16
# Thu Mar 23 20:48:09 2006
# Linux kernel version: 2.6.17
# Mon Jun 19 17:23:03 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -11,6 +11,7 @@ CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
......@@ -55,7 +56,7 @@ CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_CPUSETS=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
......@@ -116,13 +117,15 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_SYSTEMSIM=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_CELL_IIC=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
......@@ -132,7 +135,9 @@ CONFIG_CELL_IIC=y
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
CONFIG_SPU_BASE=y
CONFIG_SPUFS_MMAP=y
CONFIG_CBE_RAS=y
#
# Kernel options
......@@ -152,20 +157,24 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_ARCH_MEMORY_PROBE=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
......@@ -182,6 +191,7 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -476,7 +486,7 @@ CONFIG_DM_MULTIPATH=m
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_BONDING=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
......@@ -624,6 +634,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
......@@ -766,6 +777,7 @@ CONFIG_I2C_ALGOBIT=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
......@@ -1054,11 +1066,7 @@ CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
......
arch/powerpc/configs/mpc85xx_cds_defconfig 0 → 100644
浏览文件 @ 45c091bb
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16
# Sun Apr 2 11:23:42 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_MPIC=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Platform support
#
# CONFIG_MPC8540_ADS is not set
CONFIG_MPC85xx_CDS=y
CONFIG_MPC8540=y
CONFIG_PPC_INDIRECT_PCI_BE=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_WINDFARM is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
arch/powerpc/configs/mpc8641_hpcn_defconfig 0 → 100644
浏览文件 @ 45c091bb
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc3
# Fri Jun 16 10:47:09 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_86xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
# CONFIG_SLAB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_SLOB=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MPIC=y
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_INDIRECT_PCI_BE=y
#
# Platform Support
#
CONFIG_MPC8641_HPCN=y
CONFIG_MPC8641=y
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_WINDFARM is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
arch/powerpc/configs/pmac32_defconfig
浏览文件 @ 45c091bb
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc6
# Wed Mar 15 16:21:32 2006
# Linux kernel version: 2.6.17-rc5
# Mon May 29 14:47:49 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
......@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
......@@ -27,11 +28,11 @@ CONFIG_CLASSIC32=y
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
......@@ -59,6 +60,7 @@ CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
......@@ -73,10 +75,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
......@@ -88,7 +86,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
......@@ -97,6 +94,8 @@ CONFIG_KMOD=y
# Block layer
#
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
#
# IO Schedulers
......@@ -124,6 +123,7 @@ CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
......@@ -182,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -239,7 +238,9 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
......@@ -250,9 +251,10 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
......@@ -264,6 +266,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
......@@ -278,12 +282,15 @@ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
......@@ -305,15 +312,15 @@ CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
......@@ -335,6 +342,7 @@ CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
......@@ -350,10 +358,12 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
......@@ -361,7 +371,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_IP_DCCP_UNLOAD_HACK is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -477,6 +486,8 @@ CONFIG_IEEE80211=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
......@@ -662,9 +673,8 @@ CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
......@@ -694,16 +704,17 @@ CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
#
......@@ -740,7 +751,7 @@ CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
......@@ -769,10 +780,10 @@ CONFIG_THERM_ADT746X=m
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
CONFIG_TUN=m
#
# ARCnet devices
......@@ -857,6 +868,7 @@ CONFIG_PCNET32=y
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
......@@ -992,6 +1004,7 @@ CONFIG_HW_CONSOLE=y
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
......@@ -1027,6 +1040,7 @@ CONFIG_GEN_RTC=y
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
......@@ -1081,7 +1095,6 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
......@@ -1100,10 +1113,8 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -1130,19 +1141,17 @@ CONFIG_I2C_POWERMAC=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
......@@ -1152,6 +1161,7 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
......@@ -1175,7 +1185,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
......@@ -1234,9 +1243,11 @@ CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
......@@ -1253,6 +1264,7 @@ CONFIG_SND_DUMMY=m
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
......@@ -1285,6 +1297,7 @@ CONFIG_SND_DUMMY=m
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
......@@ -1310,6 +1323,8 @@ CONFIG_SND_USB_AUDIO=m
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
......@@ -1321,6 +1336,7 @@ CONFIG_SND_USB_AUDIO=m
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
......@@ -1336,7 +1352,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
......@@ -1347,7 +1365,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
......@@ -1358,7 +1375,17 @@ CONFIG_USB_PRINTER=m
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
......@@ -1374,9 +1401,7 @@ CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
......@@ -1390,15 +1415,6 @@ CONFIG_USB_APPLETOUCH=y
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
......@@ -1429,6 +1445,7 @@ CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
......@@ -1436,6 +1453,7 @@ CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
......@@ -1460,6 +1478,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
......@@ -1484,6 +1503,7 @@ CONFIG_USB_EZUSB=y
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
......@@ -1501,6 +1521,19 @@ CONFIG_USB_EZUSB=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
......@@ -1510,6 +1543,11 @@ CONFIG_USB_EZUSB=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
......@@ -1518,14 +1556,14 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
......@@ -1534,7 +1572,7 @@ CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
......@@ -1566,7 +1604,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
# CONFIG_CONFIGFS_FS is not set
#
......@@ -1590,17 +1627,24 @@ CONFIG_HFSPLUS_FS=m
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
......@@ -1681,7 +1725,7 @@ CONFIG_NLS_UTF8=m
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
......@@ -1735,29 +1779,29 @@ CONFIG_BOOTX_TEXT=y
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
......
arch/powerpc/configs/pseries_defconfig
浏览文件 @ 45c091bb
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc1
# Wed Apr 19 11:48:00 2006
# Linux kernel version: 2.6.17-rc4
# Sun May 28 07:26:56 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -11,6 +11,7 @@ CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
......@@ -126,8 +127,9 @@ CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
......@@ -143,7 +145,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
......@@ -155,6 +157,7 @@ CONFIG_EEH=y
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
......@@ -467,7 +470,7 @@ CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
......@@ -499,13 +502,18 @@ CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA24XX=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
......@@ -521,7 +529,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
......@@ -764,7 +772,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_ICOM=m
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -773,7 +781,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_TIPAR is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVC_RTAS=y
CONFIG_HVCS=m
#
......@@ -1031,9 +1039,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
......@@ -1104,17 +1110,26 @@ CONFIG_USB_MON=y
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
# CONFIG_INFINIBAND_SRP is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
......@@ -1159,15 +1174,15 @@ CONFIG_XFS_EXPORT=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
CONFIG_OCFS2_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
......@@ -1199,7 +1214,7 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
......@@ -1317,7 +1332,7 @@ CONFIG_ZLIB_DEFLATE=m
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_KPROBES=y
#
# Kernel hacking
......@@ -1329,7 +1344,7 @@ CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
......@@ -1339,17 +1354,13 @@ CONFIG_DEBUG_FS=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
......
arch/powerpc/kernel/align.c
浏览文件 @ 45c091bb
......@@ -35,17 +35,19 @@ struct aligninfo {
#define INVALID { 0, 0 }
#define LD 1 /* load */
#define ST 2 /* store */
#define SE 4 /* sign-extend value */
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
#define SW 0x40 /* byte swap int or ... */
#define S 0x40 /* ... single-precision fp */
#define SX 0x40 /* byte count in XER */
/* Bits in the flags field */
#define LD 0 /* load */
#define ST 1 /* store */
#define SE 2 /* sign-extend value */
#define F 4 /* to/from fp regs */
#define U 8 /* update index register */
#define M 0x10 /* multiple load/store */
#define SW 0x20 /* byte swap */
#define S 0x40 /* single-precision fp or... */
#define SX 0x40 /* ... byte count in XER */
#define HARD 0x80 /* string, stwcx. */
/* DSISR bits reported for a DCBZ instruction: */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
......@@ -256,12 +258,16 @@ static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
#define REG_BYTE(rp, i) *((u8 *)(rp) + (i))
#endif
#define SWIZ_PTR(p) ((unsigned char __user *)((p) ^ swiz))
static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
unsigned int reg, unsigned int nb,
unsigned int flags, unsigned int instr)
unsigned int flags, unsigned int instr,
unsigned long swiz)
{
unsigned long *rptr;
unsigned int nb0, i;
unsigned int nb0, i, bswiz;
unsigned long p;
/*
* We do not try to emulate 8 bytes multiple as they aren't really
......@@ -280,9 +286,12 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
if (nb == 0)
return 1;
} else {
if (__get_user(instr,
(unsigned int __user *)regs->nip))
unsigned long pc = regs->nip ^ (swiz & 4);
if (__get_user(instr, (unsigned int __user *)pc))
return -EFAULT;
if (swiz == 0 && (flags & SW))
instr = cpu_to_le32(instr);
nb = (instr >> 11) & 0x1f;
if (nb == 0)
nb = 32;
......@@ -300,7 +309,10 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
return -EFAULT; /* bad address */
rptr = &regs->gpr[reg];
if (flags & LD) {
p = (unsigned long) addr;
bswiz = (flags & SW)? 3: 0;
if (!(flags & ST)) {
/*
* This zeroes the top 4 bytes of the affected registers
* in 64-bit mode, and also zeroes out any remaining
......@@ -311,26 +323,28 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
memset(&regs->gpr[0], 0,
((nb0 + 3) / 4) * sizeof(unsigned long));
for (i = 0; i < nb; ++i)
if (__get_user(REG_BYTE(rptr, i), addr + i))
for (i = 0; i < nb; ++i, ++p)
if (__get_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
return -EFAULT;
if (nb0 > 0) {
rptr = &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__get_user(REG_BYTE(rptr, i), addr + i))
for (i = 0; i < nb0; ++i, ++p)
if (__get_user(REG_BYTE(rptr, i ^ bswiz),
SWIZ_PTR(p)))
return -EFAULT;
}
} else {
for (i = 0; i < nb; ++i)
if (__put_user(REG_BYTE(rptr, i), addr + i))
for (i = 0; i < nb; ++i, ++p)
if (__put_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
return -EFAULT;
if (nb0 > 0) {
rptr = &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__put_user(REG_BYTE(rptr, i), addr + i))
for (i = 0; i < nb0; ++i, ++p)
if (__put_user(REG_BYTE(rptr, i ^ bswiz),
SWIZ_PTR(p)))
return -EFAULT;
}
}
......@@ -352,7 +366,7 @@ int fix_alignment(struct pt_regs *regs)
unsigned int reg, areg;
unsigned int dsisr;
unsigned char __user *addr;
unsigned char __user *p;
unsigned long p, swiz;
int ret, t;
union {
u64 ll;
......@@ -380,11 +394,15 @@ int fix_alignment(struct pt_regs *regs)
* let's make one up from the instruction
*/
if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
unsigned int real_instr;
if (unlikely(__get_user(real_instr,
(unsigned int __user *)regs->nip)))
unsigned long pc = regs->nip;
if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE))
pc ^= 4;
if (unlikely(__get_user(instr, (unsigned int __user *)pc)))
return -EFAULT;
dsisr = make_dsisr(real_instr);
if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
instr = cpu_to_le32(instr);
dsisr = make_dsisr(instr);
}
/* extract the operation and registers from the dsisr */
......@@ -397,6 +415,24 @@ int fix_alignment(struct pt_regs *regs)
nb = aligninfo[instr].len;
flags = aligninfo[instr].flags;
/* Byteswap little endian loads and stores */
swiz = 0;
if (regs->msr & MSR_LE) {
flags ^= SW;
/*
* So-called "PowerPC little endian" mode works by
* swizzling addresses rather than by actually doing
* any byte-swapping. To emulate this, we XOR each
* byte address with 7. We also byte-swap, because
* the processor's address swizzling depends on the
* operand size (it xors the address with 7 for bytes,
* 6 for halfwords, 4 for words, 0 for doublewords) but
* we will xor with 7 and load/store each byte separately.
*/
if (cpu_has_feature(CPU_FTR_PPC_LE))
swiz = 7;
}
/* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar;
......@@ -412,7 +448,8 @@ int fix_alignment(struct pt_regs *regs)
* function
*/
if (flags & M)
return emulate_multiple(regs, addr, reg, nb, flags, instr);
return emulate_multiple(regs, addr, reg, nb,
flags, instr, swiz);
/* Verify the address of the operand */
if (unlikely(user_mode(regs) &&
......@@ -431,51 +468,71 @@ int fix_alignment(struct pt_regs *regs)
/* If we are loading, get the data from user space, else
* get it from register values
*/
if (flags & LD) {
if (!(flags & ST)) {
data.ll = 0;
ret = 0;
p = addr;
p = (unsigned long) addr;
switch (nb) {
case 8:
ret |= __get_user(data.v[0], p++);
ret |= __get_user(data.v[1], p++);
ret |= __get_user(data.v[2], p++);
ret |= __get_user(data.v[3], p++);
ret |= __get_user(data.v[0], SWIZ_PTR(p++));
ret |= __get_user(data.v[1], SWIZ_PTR(p++));
ret |= __get_user(data.v[2], SWIZ_PTR(p++));
ret |= __get_user(data.v[3], SWIZ_PTR(p++));
case 4:
ret |= __get_user(data.v[4], p++);
ret |= __get_user(data.v[5], p++);
ret |= __get_user(data.v[4], SWIZ_PTR(p++));
ret |= __get_user(data.v[5], SWIZ_PTR(p++));
case 2:
ret |= __get_user(data.v[6], p++);
ret |= __get_user(data.v[7], p++);
ret |= __get_user(data.v[6], SWIZ_PTR(p++));
ret |= __get_user(data.v[7], SWIZ_PTR(p++));
if (unlikely(ret))
return -EFAULT;
}
} else if (flags & F)
} else if (flags & F) {
data.dd = current->thread.fpr[reg];
else
if (flags & S) {
/* Single-precision FP store requires conversion... */
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
preempt_enable();
#else
return 0;
#endif
}
} else
data.ll = regs->gpr[reg];
/* Perform other misc operations like sign extension, byteswap,
if (flags & SW) {
switch (nb) {
case 8:
SWAP(data.v[0], data.v[7]);
SWAP(data.v[1], data.v[6]);
SWAP(data.v[2], data.v[5]);
SWAP(data.v[3], data.v[4]);
break;
case 4:
SWAP(data.v[4], data.v[7]);
SWAP(data.v[5], data.v[6]);
break;
case 2:
SWAP(data.v[6], data.v[7]);
break;
}
}
/* Perform other misc operations like sign extension
* or floating point single precision conversion
*/
switch (flags & ~U) {
switch (flags & ~(U|SW)) {
case LD+SE: /* sign extend */
if ( nb == 2 )
data.ll = data.x16.low16;
else /* nb must be 4 */
data.ll = data.x32.low32;
break;
case LD+S: /* byte-swap */
case ST+S:
if (nb == 2) {
SWAP(data.v[6], data.v[7]);
} else {
SWAP(data.v[4], data.v[7]);
SWAP(data.v[5], data.v[6]);
}
break;
/* Single-precision FP load and store require conversions... */
/* Single-precision FP load requires conversion... */
case LD+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
......@@ -484,16 +541,6 @@ int fix_alignment(struct pt_regs *regs)
preempt_enable();
#else
return 0;
#endif
break;
case ST+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
}
......@@ -501,19 +548,19 @@ int fix_alignment(struct pt_regs *regs)
/* Store result to memory or update registers */
if (flags & ST) {
ret = 0;
p = addr;
p = (unsigned long) addr;
switch (nb) {
case 8:
ret |= __put_user(data.v[0], p++);
ret |= __put_user(data.v[1], p++);
ret |= __put_user(data.v[2], p++);
ret |= __put_user(data.v[3], p++);
ret |= __put_user(data.v[0], SWIZ_PTR(p++));
ret |= __put_user(data.v[1], SWIZ_PTR(p++));
ret |= __put_user(data.v[2], SWIZ_PTR(p++));
ret |= __put_user(data.v[3], SWIZ_PTR(p++));
case 4:
ret |= __put_user(data.v[4], p++);
ret |= __put_user(data.v[5], p++);
ret |= __put_user(data.v[4], SWIZ_PTR(p++));
ret |= __put_user(data.v[5], SWIZ_PTR(p++));
case 2:
ret |= __put_user(data.v[6], p++);
ret |= __put_user(data.v[7], p++);
ret |= __put_user(data.v[6], SWIZ_PTR(p++));
ret |= __put_user(data.v[7], SWIZ_PTR(p++));
}
if (unlikely(ret))
return -EFAULT;
......
arch/powerpc/kernel/asm-offsets.c
浏览文件 @ 45c091bb
......@@ -122,9 +122,8 @@ int main(void)
DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
#ifdef CONFIG_PPC_64K_PAGES
DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir));
#endif
DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
#ifdef CONFIG_HUGETLB_PAGE
DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));
......
arch/powerpc/kernel/cpu_setup_6xx.S
浏览文件 @ 45c091bb
......@@ -210,9 +210,11 @@ setup_745x_specifics:
* the firmware. If any, we disable NAP capability as
* it's known to be bogus on rev 2.1 and earlier
*/
BEGIN_FTR_SECTION
mfspr r11,SPRN_L3CR
andis. r11,r11,L3CR_L3E@h
beq 1f
END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
lwz r6,CPU_SPEC_FEATURES(r5)
andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
beq 1f
......
arch/powerpc/kernel/cpu_setup_power4.S
浏览文件 @ 45c091bb
......@@ -73,23 +73,6 @@ _GLOBAL(__970_cpu_preinit)
isync
blr
_GLOBAL(__setup_cpu_power4)
blr
_GLOBAL(__setup_cpu_be)
/* Set large page sizes LP=0: 16MB, LP=1: 64KB */
addi r3, 0, 0
ori r3, r3, HID6_LB
sldi r3, r3, 32
nor r3, r3, r3
mfspr r4, SPRN_HID6
and r4, r4, r3
addi r3, 0, 0x02000
sldi r3, r3, 32
or r4, r4, r3
mtspr SPRN_HID6, r4
blr
_GLOBAL(__setup_cpu_ppc970)
mfspr r0,SPRN_HID0
li r11,5 /* clear DOZE and SLEEP */
......
arch/powerpc/kernel/cputable.c
浏览文件 @ 45c091bb
......@@ -30,11 +30,7 @@ EXPORT_SYMBOL(cur_cpu_spec);
* part of the cputable though. That has to be fixed for both ppc32
* and ppc64
*/
#ifdef CONFIG_PPC64
extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
#else
#ifdef CONFIG_PPC32
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
......@@ -58,7 +54,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
PPC_FEATURE_TRUE_LE)
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
......@@ -78,11 +75,10 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00400000,
.cpu_name = "POWER3 (630)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64,
.cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
.oprofile_cpu_type = "ppc64/power3",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "power3",
......@@ -92,11 +88,10 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00410000,
.cpu_name = "POWER3 (630+)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64,
.cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
.oprofile_cpu_type = "ppc64/power3",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "power3",
......@@ -110,7 +105,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
......@@ -124,7 +118,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
......@@ -138,7 +131,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
......@@ -152,7 +144,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_type = PPC_OPROFILE_RS64,
.platform = "rs64",
......@@ -166,7 +157,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power4,
.oprofile_cpu_type = "ppc64/power4",
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power4",
......@@ -180,7 +170,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power4,
.oprofile_cpu_type = "ppc64/power4",
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power4",
......@@ -200,17 +189,11 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "ppc970",
},
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_PPC64) || defined(CONFIG_POWER4)
{ /* PPC970FX */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003c0000,
.cpu_name = "PPC970FX",
#ifdef CONFIG_PPC32
.cpu_features = CPU_FTRS_970_32,
#else
.cpu_features = CPU_FTRS_PPC970,
#endif
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 128,
......@@ -221,8 +204,6 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "ppc970",
},
#endif /* defined(CONFIG_PPC64) || defined(CONFIG_POWER4) */
#ifdef CONFIG_PPC64
{ /* PPC970MP */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00440000,
......@@ -232,6 +213,7 @@ struct cpu_spec cpu_specs[] = {
PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_ppc970,
.oprofile_cpu_type = "ppc64/970",
.oprofile_type = PPC_OPROFILE_POWER4,
......@@ -246,9 +228,13 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
.oprofile_cpu_type = "ppc64/power5",
.oprofile_type = PPC_OPROFILE_POWER4,
/* SIHV / SIPR bits are implemented on POWER4+ (GQ)
* and above but only works on POWER5 and above
*/
.oprofile_mmcra_sihv = MMCRA_SIHV,
.oprofile_mmcra_sipr = MMCRA_SIPR,
.platform = "power5",
},
{ /* Power5 GS */
......@@ -260,9 +246,10 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
.oprofile_cpu_type = "ppc64/power5+",
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_mmcra_sihv = MMCRA_SIHV,
.oprofile_mmcra_sipr = MMCRA_SIPR,
.platform = "power5+",
},
{ /* Power6 */
......@@ -273,10 +260,13 @@ struct cpu_spec cpu_specs[] = {
.cpu_user_features = COMMON_USER_POWER6,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
.num_pmcs = 8,
.oprofile_cpu_type = "ppc64/power6",
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_mmcra_sihv = POWER6_MMCRA_SIHV,
.oprofile_mmcra_sipr = POWER6_MMCRA_SIPR,
.oprofile_mmcra_clear = POWER6_MMCRA_THRM |
POWER6_MMCRA_OTHER,
.platform = "power6",
},
{ /* Cell Broadband Engine */
......@@ -289,7 +279,6 @@ struct cpu_spec cpu_specs[] = {
PPC_FEATURE_SMT,
.icache_bsize = 128,
.dcache_bsize = 128,
.cpu_setup = __setup_cpu_be,
.platform = "ppc-cell-be",
},
{ /* default match */
......@@ -301,7 +290,6 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
.platform = "power4",
}
#endif /* CONFIG_PPC64 */
......@@ -323,7 +311,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00030000,
.cpu_name = "603",
.cpu_features = CPU_FTRS_603,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
......@@ -334,7 +322,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00060000,
.cpu_name = "603e",
.cpu_features = CPU_FTRS_603,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
......@@ -345,7 +333,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00070000,
.cpu_name = "603ev",
.cpu_features = CPU_FTRS_603,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
......@@ -356,7 +344,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00040000,
.cpu_name = "604",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 2,
......@@ -368,7 +356,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00090000,
.cpu_name = "604e",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -380,7 +368,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00090000,
.cpu_name = "604r",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -392,7 +380,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x000a0000,
.cpu_name = "604ev",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -404,7 +392,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00084202,
.cpu_name = "740/750",
.cpu_features = CPU_FTRS_740_NOTAU,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -416,7 +404,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00080100,
.cpu_name = "750CX",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -428,7 +416,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00082200,
.cpu_name = "750CX",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -440,7 +428,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00082210,
.cpu_name = "750CXe",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -452,7 +440,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00083214,
.cpu_name = "750CXe",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -464,7 +452,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00083000,
.cpu_name = "745/755",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -476,7 +464,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x70000100,
.cpu_name = "750FX",
.cpu_features = CPU_FTRS_750FX1,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -488,7 +476,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x70000200,
.cpu_name = "750FX",
.cpu_features = CPU_FTRS_750FX2,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -500,7 +488,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x70000000,
.cpu_name = "750FX",
.cpu_features = CPU_FTRS_750FX,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -512,7 +500,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x70020000,
.cpu_name = "750GX",
.cpu_features = CPU_FTRS_750GX,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -524,7 +512,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x00080000,
.cpu_name = "740/750",
.cpu_features = CPU_FTRS_740,
.cpu_user_features = COMMON_USER,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -536,7 +524,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x000c1101,
.cpu_name = "7400 (1.1)",
.cpu_features = CPU_FTRS_7400_NOTAU,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -548,7 +537,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x000c0000,
.cpu_name = "7400",
.cpu_features = CPU_FTRS_7400,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -560,7 +550,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x800c0000,
.cpu_name = "7410",
.cpu_features = CPU_FTRS_7400,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
......@@ -572,7 +563,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80000200,
.cpu_name = "7450",
.cpu_features = CPU_FTRS_7450_20,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -586,7 +578,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80000201,
.cpu_name = "7450",
.cpu_features = CPU_FTRS_7450_21,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -600,7 +593,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80000000,
.cpu_name = "7450",
.cpu_features = CPU_FTRS_7450_23,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -614,7 +608,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80010100,
.cpu_name = "7455",
.cpu_features = CPU_FTRS_7455_1,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -628,7 +623,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80010200,
.cpu_name = "7455",
.cpu_features = CPU_FTRS_7455_20,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -642,7 +638,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80010000,
.cpu_name = "7455",
.cpu_features = CPU_FTRS_7455,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -656,7 +653,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80020100,
.cpu_name = "7447/7457",
.cpu_features = CPU_FTRS_7447_10,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -670,7 +668,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80020101,
.cpu_name = "7447/7457",
.cpu_features = CPU_FTRS_7447_10,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -684,7 +683,7 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80020000,
.cpu_name = "7447/7457",
.cpu_features = CPU_FTRS_7447,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -698,7 +697,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80030000,
.cpu_name = "7447A",
.cpu_features = CPU_FTRS_7447A,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -712,7 +712,8 @@ struct cpu_spec cpu_specs[] = {
.pvr_value = 0x80040000,
.cpu_name = "7448",
.cpu_features = CPU_FTRS_7447A,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
......@@ -721,6 +722,18 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_G4,
.platform = "ppc7450",
},
{ /* 8641 */
.pvr_mask = 0xffffffff,
.pvr_value = 0x80040010,
.cpu_name = "8641",
.cpu_features = CPU_FTRS_7447A,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_745x
},
{ /* 82xx (8240, 8245, 8260 are all 603e cores) */
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00810000,
......
arch/powerpc/kernel/crash.c
浏览文件 @ 45c091bb
......@@ -22,6 +22,7 @@
#include <linux/elf.h>
#include <linux/elfcore.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <asm/processor.h>
......@@ -174,6 +175,8 @@ static void crash_kexec_prepare_cpus(void)
void default_machine_crash_shutdown(struct pt_regs *regs)
{
unsigned int irq;
/*
* This function is only called after the system
* has paniced or is otherwise in a critical state.
......@@ -186,6 +189,16 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
*/
local_irq_disable();
for_each_irq(irq) {
struct irq_desc *desc = irq_descp(irq);
if (desc->status & IRQ_INPROGRESS)
desc->handler->end(irq);
if (!(desc->status & IRQ_DISABLED))
desc->handler->disable(irq);
}
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
......
arch/powerpc/kernel/crash_dump.c
浏览文件 @ 45c091bb
......@@ -25,6 +25,11 @@
#define DBG(fmt...)
#endif
void reserve_kdump_trampoline(void)
{
lmb_reserve(0, KDUMP_RESERVE_LIMIT);
}
static void __init create_trampoline(unsigned long addr)
{
/* The maximum range of a single instruction branch, is the current
......@@ -39,11 +44,11 @@ static void __init create_trampoline(unsigned long addr)
create_branch(addr + 4, addr + PHYSICAL_START, 0);
}
void __init kdump_setup(void)
void __init setup_kdump_trampoline(void)
{
unsigned long i;
DBG(" -> kdump_setup()\n");
DBG(" -> setup_kdump_trampoline()\n");
for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
create_trampoline(i);
......@@ -52,7 +57,7 @@ void __init kdump_setup(void)
create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
DBG(" <- kdump_setup()\n");
DBG(" <- setup_kdump_trampoline()\n");
}
#ifdef CONFIG_PROC_VMCORE
......
arch/powerpc/kernel/entry_64.S
浏览文件 @ 45c091bb
......@@ -57,6 +57,7 @@ system_call_common:
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
crclr so
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
......@@ -75,7 +76,6 @@ system_call_common:
std r11,GPR11(r1)
std r11,GPR12(r1)
std r9,GPR13(r1)
crclr so
mfcr r9
mflr r10
li r11,0xc01
......
arch/powerpc/kernel/fpu.S
浏览文件 @ 45c091bb
......@@ -72,7 +72,7 @@ _GLOBAL(load_up_fpu)
std r12,_MSR(r1)
#endif
lfd fr0,THREAD_FPSCR(r5)
mtfsf 0xff,fr0
MTFSF_L(fr0)
REST_32FPRS(0, r5)
#ifndef CONFIG_SMP
subi r4,r5,THREAD
......@@ -127,7 +127,7 @@ _GLOBAL(giveup_fpu)
_GLOBAL(cvt_fd)
lfd 0,THREAD_FPSCR(r5) /* load up fpscr value */
mtfsf 0xff,0
MTFSF_L(0)
lfs 0,0(r3)
stfd 0,0(r4)
mffs 0
......@@ -136,7 +136,7 @@ _GLOBAL(cvt_fd)
_GLOBAL(cvt_df)
lfd 0,THREAD_FPSCR(r5) /* load up fpscr value */
mtfsf 0xff,0
MTFSF_L(0)
lfd 0,0(r3)
stfs 0,0(r4)
mffs 0
......
arch/powerpc/kernel/head_32.S
浏览文件 @ 45c091bb
......@@ -973,6 +973,13 @@ __secondary_start_gemini:
b __secondary_start
#endif /* CONFIG_GEMINI */
.globl __secondary_start_mpc86xx
__secondary_start_mpc86xx:
mfspr r3, SPRN_PIR
stw r3, __secondary_hold_acknowledge@l(0)
mr r24, r3 /* cpu # */
b __secondary_start
.globl __secondary_start_pmac_0
__secondary_start_pmac_0:
/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
......@@ -1088,7 +1095,12 @@ load_up_mmu:
LOAD_BAT(1,r3,r4,r5)
LOAD_BAT(2,r3,r4,r5)
LOAD_BAT(3,r3,r4,r5)
BEGIN_FTR_SECTION
LOAD_BAT(4,r3,r4,r5)
LOAD_BAT(5,r3,r4,r5)
LOAD_BAT(6,r3,r4,r5)
LOAD_BAT(7,r3,r4,r5)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
blr
/*
......
arch/powerpc/kernel/head_64.S
浏览文件 @ 45c091bb
......@@ -316,6 +316,21 @@ label##_pSeries: \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define HSTD_EXCEPTION_PSERIES(n, label) \
. = n; \
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r20; /* save r20 */ \
mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \
mtspr SPRN_SRR0,r20; \
mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \
mtspr SPRN_SRR1,r20; \
mfspr r20,SPRN_SPRG1; /* restore r20 */ \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define STD_EXCEPTION_ISERIES(n, label, area) \
.globl label##_iSeries; \
label##_iSeries: \
......@@ -544,8 +559,17 @@ system_call_pSeries:
STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
#endif /* CONFIG_CBE_RAS */
. = 0x3000
......@@ -827,6 +851,11 @@ machine_check_common:
#else
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
#endif
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
/*
* Here we have detected that the kernel stack pointer is bad.
......
arch/powerpc/kernel/iomap.c
浏览文件 @ 45c091bb
......@@ -106,8 +106,6 @@ EXPORT_SYMBOL(iowrite32_rep);
void __iomem *ioport_map(unsigned long port, unsigned int len)
{
if (!_IO_IS_VALID(port))
return NULL;
return (void __iomem *) (port+pci_io_base);
}
......
arch/powerpc/kernel/iommu.c
浏览文件 @ 45c091bb
......@@ -418,10 +418,11 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
* Build a iommu_table structure. This contains a bit map which
* is used to manage allocation of the tce space.
*/
struct iommu_table *iommu_init_table(struct iommu_table *tbl)
struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
{
unsigned long sz;
static int welcomed = 0;
struct page *page;
/* Set aside 1/4 of the table for large allocations. */
tbl->it_halfpoint = tbl->it_size * 3 / 4;
......@@ -429,10 +430,10 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl)
/* number of bytes needed for the bitmap */
sz = (tbl->it_size + 7) >> 3;
tbl->it_map = (unsigned long *)__get_free_pages(GFP_ATOMIC, get_order(sz));
if (!tbl->it_map)
page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
if (!page)
panic("iommu_init_table: Can't allocate %ld bytes\n", sz);
tbl->it_map = page_address(page);
memset(tbl->it_map, 0, sz);
tbl->it_hint = 0;
......@@ -536,11 +537,12 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
* to the dma address (mapping) of the first page.
*/
void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
dma_addr_t *dma_handle, unsigned long mask, gfp_t flag)
dma_addr_t *dma_handle, unsigned long mask, gfp_t flag, int node)
{
void *ret = NULL;
dma_addr_t mapping;
unsigned int npages, order;
struct page *page;
size = PAGE_ALIGN(size);
npages = size >> PAGE_SHIFT;
......@@ -560,9 +562,10 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
return NULL;
/* Alloc enough pages (and possibly more) */
ret = (void *)__get_free_pages(flag, order);
if (!ret)
page = alloc_pages_node(node, flag, order);
if (!page)
return NULL;
ret = page_address(page);
memset(ret, 0, size);
/* Set up tces to cover the allocated range */
......@@ -570,9 +573,9 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
mask >> PAGE_SHIFT, order);
if (mapping == DMA_ERROR_CODE) {
free_pages((unsigned long)ret, order);
ret = NULL;
} else
*dma_handle = mapping;
return NULL;
}
*dma_handle = mapping;
return ret;
}
......
arch/powerpc/kernel/irq.c
浏览文件 @ 45c091bb
......@@ -47,6 +47,7 @@
#include <linux/cpumask.h>
#include <linux/profile.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/system.h>
......@@ -436,6 +437,30 @@ void do_softirq(void)
}
EXPORT_SYMBOL(do_softirq);
#ifdef CONFIG_PCI_MSI
int pci_enable_msi(struct pci_dev * pdev)
{
if (ppc_md.enable_msi)
return ppc_md.enable_msi(pdev);
else
return -1;
}
void pci_disable_msi(struct pci_dev * pdev)
{
if (ppc_md.disable_msi)
ppc_md.disable_msi(pdev);
}
void pci_scan_msi_device(struct pci_dev *dev) {}
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) {return -1;}
void pci_disable_msix(struct pci_dev *dev) {}
void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
void disable_msi_mode(struct pci_dev *dev, int pos, int type) {}
void pci_no_msi(void) {}
#endif
#ifdef CONFIG_PPC64
static int __init setup_noirqdistrib(char *str)
{
......
arch/powerpc/kernel/lparcfg.c
浏览文件 @ 45c091bb
......@@ -521,10 +521,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
current_weight = (resource >> 5 * 8) & 0xFF;
pr_debug("%s: current_entitled = %lu, current_weight = %lu\n",
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
__FUNCTION__, current_entitled, current_weight);
pr_debug("%s: new_entitled = %lu, new_weight = %lu\n",
pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
__FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
......
arch/powerpc/kernel/machine_kexec_64.c
浏览文件 @ 45c091bb
......@@ -21,6 +21,7 @@
#include <asm/machdep.h>
#include <asm/cacheflush.h>
#include <asm/paca.h>
#include <asm/lmb.h>
#include <asm/mmu.h>
#include <asm/sections.h> /* _end */
#include <asm/prom.h>
......@@ -335,7 +336,105 @@ static void __init export_htab_values(void)
of_node_put(node);
}
static struct property crashk_base_prop = {
.name = "linux,crashkernel-base",
.length = sizeof(unsigned long),
.value = (unsigned char *)&crashk_res.start,
};
static unsigned long crashk_size;
static struct property crashk_size_prop = {
.name = "linux,crashkernel-size",
.length = sizeof(unsigned long),
.value = (unsigned char *)&crashk_size,
};
static void __init export_crashk_values(void)
{
struct device_node *node;
struct property *prop;
node = of_find_node_by_path("/chosen");
if (!node)
return;
/* There might be existing crash kernel properties, but we can't
* be sure what's in them, so remove them. */
prop = of_find_property(node, "linux,crashkernel-base", NULL);
if (prop)
prom_remove_property(node, prop);
prop = of_find_property(node, "linux,crashkernel-size", NULL);
if (prop)
prom_remove_property(node, prop);
if (crashk_res.start != 0) {
prom_add_property(node, &crashk_base_prop);
crashk_size = crashk_res.end - crashk_res.start + 1;
prom_add_property(node, &crashk_size_prop);
}
of_node_put(node);
}
void __init kexec_setup(void)
{
export_htab_values();
export_crashk_values();
}
static int __init early_parse_crashk(char *p)
{
unsigned long size;
if (!p)
return 1;
size = memparse(p, &p);
if (*p == '@')
crashk_res.start = memparse(p + 1, &p);
else
crashk_res.start = KDUMP_KERNELBASE;
crashk_res.end = crashk_res.start + size - 1;
return 0;
}
early_param("crashkernel", early_parse_crashk);
void __init reserve_crashkernel(void)
{
unsigned long size;
if (crashk_res.start == 0)
return;
/* We might have got these values via the command line or the
* device tree, either way sanitise them now. */
size = crashk_res.end - crashk_res.start + 1;
if (crashk_res.start != KDUMP_KERNELBASE)
printk("Crash kernel location must be 0x%x\n",
KDUMP_KERNELBASE);
crashk_res.start = KDUMP_KERNELBASE;
size = PAGE_ALIGN(size);
crashk_res.end = crashk_res.start + size - 1;
/* Crash kernel trumps memory limit */
if (memory_limit && memory_limit <= crashk_res.end) {
memory_limit = crashk_res.end + 1;
printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
memory_limit);
}
lmb_reserve(crashk_res.start, size);
}
int overlaps_crashkernel(unsigned long start, unsigned long size)
{
return (start + size) > crashk_res.start && start <= crashk_res.end;
}
arch/powerpc/kernel/misc_32.S
浏览文件 @ 45c091bb
......@@ -216,7 +216,7 @@ _GLOBAL(call_setup_cpu)
lwz r4,0(r4)
add r4,r4,r3
lwz r5,CPU_SPEC_SETUP(r4)
cmpi 0,r5,0
cmpwi 0,r5,0
add r5,r5,r3
beqlr
mtctr r5
......
arch/powerpc/kernel/misc_64.S
浏览文件 @ 45c091bb
......@@ -482,7 +482,9 @@ _GLOBAL(identify_cpu)
sub r0,r3,r5
std r0,0(r4)
ld r4,CPU_SPEC_SETUP(r3)
cmpdi 0,r4,0
add r4,r4,r5
beqlr
ld r4,0(r4)
add r4,r4,r5
mtctr r4
......@@ -768,9 +770,6 @@ _GLOBAL(giveup_altivec)
#endif /* CONFIG_ALTIVEC */
_GLOBAL(__setup_cpu_power3)
blr
_GLOBAL(execve)
li r0,__NR_execve
sc
......
arch/powerpc/kernel/nvram_64.c
浏览文件 @ 45c091bb
......@@ -204,7 +204,7 @@ static void nvram_print_partitions(char * label)
printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
list_for_each(p, &nvram_part->partition) {
tmp_part = list_entry(p, struct nvram_partition, partition);
printk(KERN_WARNING "%d \t%02x\t%02x\t%d\t%s\n",
printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%s\n",
tmp_part->index, tmp_part->header.signature,
tmp_part->header.checksum, tmp_part->header.length,
tmp_part->header.name);
......
arch/powerpc/kernel/pci_32.c
浏览文件 @ 45c091bb
......@@ -1113,9 +1113,10 @@ check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
int i;
int rc = 0;
#define push_end(res, size) do { unsigned long __sz = (size) ; \
res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \
} while (0)
#define push_end(res, mask) do { \
BUG_ON((mask+1) & mask); \
res->end = (res->end + mask) | mask; \
} while (0)
list_for_each_entry(dev, &bus->devices, bus_list) {
u16 class = dev->class >> 8;
......
arch/powerpc/kernel/pci_64.c
浏览文件 @ 45c091bb
......@@ -42,14 +42,6 @@
unsigned long pci_probe_only = 1;
int pci_assign_all_buses = 0;
/*
* legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch
* devices we don't have access to.
*/
unsigned long io_page_mask;
EXPORT_SYMBOL(io_page_mask);
#ifdef CONFIG_PPC_MULTIPLATFORM
static void fixup_resource(struct resource *res, struct pci_dev *dev);
static void do_bus_setup(struct pci_bus *bus);
......@@ -235,8 +227,10 @@ struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
pci_setup_pci_controller(phb);
phb->arch_data = dev;
phb->is_dynamic = mem_init_done;
if (dev)
if (dev) {
PHB_SET_NODE(phb, of_node_to_nid(dev));
add_linux_pci_domain(dev, phb);
}
return phb;
}
......@@ -396,7 +390,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->current_state = 4; /* unknown power state */
if (!strcmp(type, "pci")) {
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
......@@ -605,7 +599,7 @@ static int __init pcibios_init(void)
iSeries_pcibios_init();
#endif
printk("PCI: Probing PCI hardware\n");
printk(KERN_DEBUG "PCI: Probing PCI hardware\n");
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
......@@ -630,14 +624,14 @@ static int __init pcibios_init(void)
/* Cache the location of the ISA bridge (if we have one) */
ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
if (ppc64_isabridge_dev != NULL)
printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
#ifdef CONFIG_PPC_MULTIPLATFORM
/* map in PCI I/O space */
phbs_remap_io();
#endif
printk("PCI: Probing PCI hardware done\n");
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
return 0;
}
......@@ -804,7 +798,7 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
else
prot |= _PAGE_GUARDED;
printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
prot);
return __pgprot(prot);
......@@ -894,8 +888,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return ret;
}
#ifdef CONFIG_PPC_MULTIPLATFORM
static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
static ssize_t pci_show_devspec(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct pci_dev *pdev;
struct device_node *np;
......@@ -907,13 +901,10 @@ static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *att
return sprintf(buf, "%s", np->full_name);
}
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
#endif /* CONFIG_PPC_MULTIPLATFORM */
void pcibios_add_platform_entries(struct pci_dev *pdev)
{
#ifdef CONFIG_PPC_MULTIPLATFORM
device_create_file(&pdev->dev, &dev_attr_devspec);
#endif /* CONFIG_PPC_MULTIPLATFORM */
}
#ifdef CONFIG_PPC_MULTIPLATFORM
......@@ -1104,8 +1095,6 @@ void __init pci_setup_phb_io(struct pci_controller *hose, int primary)
pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys,
hose->io_base_virt);
of_node_put(isa_dn);
/* Allow all IO */
io_page_mask = -1;
}
}
......@@ -1212,7 +1201,7 @@ int remap_bus_range(struct pci_bus *bus)
return 1;
if (start_phys == 0)
return 1;
printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
printk(KERN_DEBUG "mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
if (__ioremap_explicit(start_phys, start_virt, size,
_PAGE_NO_CACHE | _PAGE_GUARDED))
return 1;
......@@ -1232,27 +1221,13 @@ static void phbs_remap_io(void)
static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
unsigned long start, end, mask, offset;
unsigned long offset;
if (res->flags & IORESOURCE_IO) {
offset = (unsigned long)hose->io_base_virt - pci_io_base;
start = res->start += offset;
end = res->end += offset;
/* Need to allow IO access to pages that are in the
ISA range */
if (start < MAX_ISA_PORT) {
if (end > MAX_ISA_PORT)
end = MAX_ISA_PORT;
start >>= PAGE_SHIFT;
end >>= PAGE_SHIFT;
/* get the range of pages for the map */
mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1);
io_page_mask |= mask;
}
res->start += offset;
res->end += offset;
} else if (res->flags & IORESOURCE_MEM) {
res->start += hose->pci_mem_offset;
res->end += hose->pci_mem_offset;
......@@ -1442,3 +1417,12 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,
return -EOPNOTSUPP;
}
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
struct pci_controller *phb = pci_bus_to_host(bus);
return phb->node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
arch/powerpc/kernel/pci_direct_iommu.c
浏览文件 @ 45c091bb
......@@ -82,13 +82,17 @@ static int pci_direct_dma_supported(struct device *dev, u64 mask)
return mask < 0x100000000ull;
}
static struct dma_mapping_ops pci_direct_ops = {
.alloc_coherent = pci_direct_alloc_coherent,
.free_coherent = pci_direct_free_coherent,
.map_single = pci_direct_map_single,
.unmap_single = pci_direct_unmap_single,
.map_sg = pci_direct_map_sg,
.unmap_sg = pci_direct_unmap_sg,
.dma_supported = pci_direct_dma_supported,
};
void __init pci_direct_iommu_init(void)
{
pci_dma_ops.alloc_coherent = pci_direct_alloc_coherent;
pci_dma_ops.free_coherent = pci_direct_free_coherent;
pci_dma_ops.map_single = pci_direct_map_single;
pci_dma_ops.unmap_single = pci_direct_unmap_single;
pci_dma_ops.map_sg = pci_direct_map_sg;
pci_dma_ops.unmap_sg = pci_direct_unmap_sg;
pci_dma_ops.dma_supported = pci_direct_dma_supported;
pci_dma_ops = pci_direct_ops;
}
arch/powerpc/kernel/pci_dn.c
浏览文件 @ 45c091bb
......@@ -31,6 +31,7 @@
#include <asm/pci-bridge.h>
#include <asm/pSeries_reconfig.h>
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
/*
* Traverse_func that inits the PCI fields of the device node.
......@@ -59,6 +60,11 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
pdn->busno = (regs[0] >> 16) & 0xff;
pdn->devfn = (regs[0] >> 8) & 0xff;
}
if (firmware_has_feature(FW_FEATURE_ISERIES)) {
u32 *busp = (u32 *)get_property(dn, "linux,subbus", NULL);
if (busp)
pdn->bussubno = *busp;
}
pdn->pci_ext_config_space = (type && *type == 1);
return NULL;
......
arch/powerpc/kernel/pci_iommu.c
浏览文件 @ 45c091bb
......@@ -44,16 +44,16 @@
*/
#define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata))
static inline struct iommu_table *devnode_table(struct device *dev)
static inline struct iommu_table *device_to_table(struct device *hwdev)
{
struct pci_dev *pdev;
if (!dev) {
if (!hwdev) {
pdev = ppc64_isabridge_dev;
if (!pdev)
return NULL;
} else
pdev = to_pci_dev(dev);
pdev = to_pci_dev(hwdev);
return PCI_DN(PCI_GET_DN(pdev))->iommu_table;
}
......@@ -85,14 +85,15 @@ static inline unsigned long device_to_mask(struct device *hwdev)
static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
device_to_mask(hwdev), flag);
return iommu_alloc_coherent(device_to_table(hwdev), size, dma_handle,
device_to_mask(hwdev), flag,
pcibus_to_node(to_pci_dev(hwdev)->bus));
}
static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
iommu_free_coherent(devnode_table(hwdev), size, vaddr, dma_handle);
iommu_free_coherent(device_to_table(hwdev), size, vaddr, dma_handle);
}
/* Creates TCEs for a user provided buffer. The user buffer must be
......@@ -104,7 +105,7 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
size_t size, enum dma_data_direction direction)
{
return iommu_map_single(devnode_table(hwdev), vaddr, size,
return iommu_map_single(device_to_table(hwdev), vaddr, size,
device_to_mask(hwdev), direction);
}
......@@ -112,27 +113,27 @@ static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
iommu_unmap_single(devnode_table(hwdev), dma_handle, size, direction);
iommu_unmap_single(device_to_table(hwdev), dma_handle, size, direction);
}
static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
return iommu_map_sg(pdev, devnode_table(pdev), sglist,
return iommu_map_sg(pdev, device_to_table(pdev), sglist,
nelems, device_to_mask(pdev), direction);
}
static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
iommu_unmap_sg(devnode_table(pdev), sglist, nelems, direction);
iommu_unmap_sg(device_to_table(pdev), sglist, nelems, direction);
}
/* We support DMA to/from any memory page via the iommu */
static int pci_iommu_dma_supported(struct device *dev, u64 mask)
{
struct iommu_table *tbl = devnode_table(dev);
struct iommu_table *tbl = device_to_table(dev);
if (!tbl || tbl->it_offset > mask) {
printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n");
......@@ -147,13 +148,17 @@ static int pci_iommu_dma_supported(struct device *dev, u64 mask)
return 1;
}
struct dma_mapping_ops pci_iommu_ops = {
.alloc_coherent = pci_iommu_alloc_coherent,
.free_coherent = pci_iommu_free_coherent,
.map_single = pci_iommu_map_single,
.unmap_single = pci_iommu_unmap_single,
.map_sg = pci_iommu_map_sg,
.unmap_sg = pci_iommu_unmap_sg,
.dma_supported = pci_iommu_dma_supported,
};
void pci_iommu_init(void)
{
pci_dma_ops.alloc_coherent = pci_iommu_alloc_coherent;
pci_dma_ops.free_coherent = pci_iommu_free_coherent;
pci_dma_ops.map_single = pci_iommu_map_single;
pci_dma_ops.unmap_single = pci_iommu_unmap_single;
pci_dma_ops.map_sg = pci_iommu_map_sg;
pci_dma_ops.unmap_sg = pci_iommu_unmap_sg;
pci_dma_ops.dma_supported = pci_iommu_dma_supported;
pci_dma_ops = pci_iommu_ops;
}
arch/powerpc/kernel/proc_ppc64.c
浏览文件 @ 45c091bb
......@@ -52,7 +52,7 @@ static int __init proc_ppc64_create(void)
if (!root)
return 1;
if (!machine_is(pseries) && !machine_is(cell))
if (!of_find_node_by_path("/rtas"))
return 0;
if (!proc_mkdir("rtas", root))
......
arch/powerpc/kernel/process.c
浏览文件 @ 45c091bb
......@@ -708,6 +708,61 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
return put_user(val, (unsigned int __user *) adr);
}
int set_endian(struct task_struct *tsk, unsigned int val)
{
struct pt_regs *regs = tsk->thread.regs;
if ((val == PR_ENDIAN_LITTLE && !cpu_has_feature(CPU_FTR_REAL_LE)) ||
(val == PR_ENDIAN_PPC_LITTLE && !cpu_has_feature(CPU_FTR_PPC_LE)))
return -EINVAL;
if (regs == NULL)
return -EINVAL;
if (val == PR_ENDIAN_BIG)
regs->msr &= ~MSR_LE;
else if (val == PR_ENDIAN_LITTLE || val == PR_ENDIAN_PPC_LITTLE)
regs->msr |= MSR_LE;
else
return -EINVAL;
return 0;
}
int get_endian(struct task_struct *tsk, unsigned long adr)
{
struct pt_regs *regs = tsk->thread.regs;
unsigned int val;
if (!cpu_has_feature(CPU_FTR_PPC_LE) &&
!cpu_has_feature(CPU_FTR_REAL_LE))
return -EINVAL;
if (regs == NULL)
return -EINVAL;
if (regs->msr & MSR_LE) {
if (cpu_has_feature(CPU_FTR_REAL_LE))
val = PR_ENDIAN_LITTLE;
else
val = PR_ENDIAN_PPC_LITTLE;
} else
val = PR_ENDIAN_BIG;
return put_user(val, (unsigned int __user *)adr);
}
int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
{
tsk->thread.align_ctl = val;
return 0;
}
int get_unalign_ctl(struct task_struct *tsk, unsigned long adr)
{
return put_user(tsk->thread.align_ctl, (unsigned int __user *)adr);
}
#define TRUNC_PTR(x) ((typeof(x))(((unsigned long)(x)) & 0xffffffff))
int sys_clone(unsigned long clone_flags, unsigned long usp,
......
arch/powerpc/kernel/prom.c
浏览文件 @ 45c091bb
......@@ -50,6 +50,7 @@
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
#include <asm/kexec.h>
#ifdef DEBUG
#define DBG(fmt...) printk(KERN_ERR fmt)
......@@ -836,6 +837,42 @@ static unsigned long __init unflatten_dt_node(unsigned long mem,
return mem;
}
static int __init early_parse_mem(char *p)
{
if (!p)
return 1;
memory_limit = PAGE_ALIGN(memparse(p, &p));
DBG("memory limit = 0x%lx\n", memory_limit);
return 0;
}
early_param("mem", early_parse_mem);
/*
* The device tree may be allocated below our memory limit, or inside the
* crash kernel region for kdump. If so, move it out now.
*/
static void move_device_tree(void)
{
unsigned long start, size;
void *p;
DBG("-> move_device_tree\n");
start = __pa(initial_boot_params);
size = initial_boot_params->totalsize;
if ((memory_limit && (start + size) > memory_limit) ||
overlaps_crashkernel(start, size)) {
p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
memcpy(p, initial_boot_params, size);
initial_boot_params = (struct boot_param_header *)p;
DBG("Moved device tree to 0x%p\n", p);
}
DBG("<- move_device_tree\n");
}
/**
* unflattens the device-tree passed by the firmware, creating the
......@@ -911,7 +948,10 @@ static struct ibm_pa_feature {
{CPU_FTR_CTRL, 0, 0, 3, 0},
{CPU_FTR_NOEXECUTE, 0, 0, 6, 0},
{CPU_FTR_NODSISRALIGN, 0, 1, 1, 1},
#if 0
/* put this back once we know how to test if firmware does 64k IO */
{CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0},
#endif
};
static void __init check_cpu_pa_features(unsigned long node)
......@@ -1070,6 +1110,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
iommu_force_on = 1;
#endif
/* mem=x on the command line is the preferred mechanism */
lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
if (lprop)
memory_limit = *lprop;
......@@ -1123,17 +1164,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
DBG("Command line is: %s\n", cmd_line);
if (strstr(cmd_line, "mem=")) {
char *p, *q;
for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
q = p + 4;
if (p > cmd_line && p[-1] != ' ')
continue;
memory_limit = memparse(q, &q);
}
}
/* break now */
return 1;
}
......@@ -1237,9 +1267,17 @@ static void __init early_reserve_mem(void)
{
u64 base, size;
u64 *reserve_map;
unsigned long self_base;
unsigned long self_size;
reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
initial_boot_params->off_mem_rsvmap);
/* before we do anything, lets reserve the dt blob */
self_base = __pa((unsigned long)initial_boot_params);
self_size = initial_boot_params->totalsize;
lmb_reserve(self_base, self_size);
#ifdef CONFIG_PPC32
/*
* Handle the case where we might be booting from an old kexec
......@@ -1254,6 +1292,9 @@ static void __init early_reserve_mem(void)
size_32 = *(reserve_map_32++);
if (size_32 == 0)
break;
/* skip if the reservation is for the blob */
if (base_32 == self_base && size_32 == self_size)
continue;
DBG("reserving: %x -> %x\n", base_32, size_32);
lmb_reserve(base_32, size_32);
}
......@@ -1265,6 +1306,9 @@ static void __init early_reserve_mem(void)
size = *(reserve_map++);
if (size == 0)
break;
/* skip if the reservation is for the blob */
if (base == self_base && size == self_size)
continue;
DBG("reserving: %llx -> %llx\n", base, size);
lmb_reserve(base, size);
}
......@@ -1292,18 +1336,26 @@ void __init early_init_devtree(void *params)
lmb_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
/* Save command line for /proc/cmdline and then parse parameters */
strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
/* Reserve LMB regions used by kernel, initrd, dt, etc... */
lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
#ifdef CONFIG_CRASH_DUMP
lmb_reserve(0, KDUMP_RESERVE_LIMIT);
#endif
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */
move_device_tree();
DBG("Scanning CPUs ...\n");
/* Retreive CPU related informations from the flat tree
......@@ -2053,29 +2105,46 @@ int prom_update_property(struct device_node *np,
return 0;
}
#ifdef CONFIG_KEXEC
/* We may have allocated the flat device tree inside the crash kernel region
* in prom_init. If so we need to move it out into regular memory. */
void kdump_move_device_tree(void)
{
unsigned long start, end;
struct boot_param_header *new;
start = __pa((unsigned long)initial_boot_params);
end = start + initial_boot_params->totalsize;
if (end < crashk_res.start || start > crashk_res.end)
return;
new = (struct boot_param_header*)
__va(lmb_alloc(initial_boot_params->totalsize, PAGE_SIZE));
memcpy(new, initial_boot_params, initial_boot_params->totalsize);
/* Find the device node for a given logical cpu number, also returns the cpu
* local thread number (index in ibm,interrupt-server#s) if relevant and
* asked for (non NULL)
*/
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
{
int hardid;
struct device_node *np;
initial_boot_params = new;
hardid = get_hard_smp_processor_id(cpu);
DBG("Flat device tree blob moved to %p\n", initial_boot_params);
for_each_node_by_type(np, "cpu") {
u32 *intserv;
unsigned int plen, t;
/* XXX should we unreserve the old DT? */
/* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
* fallback to "reg" property and assume no threads
*/
intserv = (u32 *)get_property(np, "ibm,ppc-interrupt-server#s",
&plen);
if (intserv == NULL) {
u32 *reg = (u32 *)get_property(np, "reg", NULL);
if (reg == NULL)
continue;
if (*reg == hardid) {
if (thread)
*thread = 0;
return np;
}
} else {
plen /= sizeof(u32);
for (t = 0; t < plen; t++) {
if (hardid == intserv[t]) {
if (thread)
*thread = t;
return np;
}
}
}
}
return NULL;
}
#endif /* CONFIG_KEXEC */
arch/powerpc/kernel/prom_init.c
浏览文件 @ 45c091bb
......@@ -194,19 +194,12 @@ static int __initdata of_platform;
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
static unsigned long __initdata prom_memory_limit;
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
static unsigned long __initdata rmo_top;
static unsigned long __initdata ram_top;
#ifdef CONFIG_KEXEC
static unsigned long __initdata prom_crashk_base;
static unsigned long __initdata prom_crashk_size;
#endif
static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE];
static int __initdata mem_reserve_cnt;
......@@ -574,7 +567,7 @@ static void __init early_cmdline_parse(void)
if ((long)_prom->chosen > 0)
l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
#ifdef CONFIG_CMDLINE
if (l == 0) /* dbl check */
if (l <= 0 || p[0] == '\0') /* dbl check */
strlcpy(RELOC(prom_cmd_line),
RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line));
#endif /* CONFIG_CMDLINE */
......@@ -593,45 +586,6 @@ static void __init early_cmdline_parse(void)
RELOC(iommu_force_on) = 1;
}
#endif
opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
if (opt) {
opt += 4;
RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
#ifdef CONFIG_PPC64
/* Align to 16 MB == size of ppc64 large page */
RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
#endif
}
#ifdef CONFIG_KEXEC
/*
* crashkernel=size@addr specifies the location to reserve for
* crash kernel.
*/
opt = strstr(RELOC(prom_cmd_line), RELOC("crashkernel="));
if (opt) {
opt += 12;
RELOC(prom_crashk_size) =
prom_memparse(opt, (const char **)&opt);
if (ALIGN(RELOC(prom_crashk_size), 0x1000000) !=
RELOC(prom_crashk_size)) {
prom_printf("Warning: crashkernel size is not "
"aligned to 16MB\n");
}
/*
* At present, the crash kernel always run at 32MB.
* Just ignore whatever user passed.
*/
RELOC(prom_crashk_base) = 0x2000000;
if (*opt == '@') {
prom_printf("Warning: PPC64 kdump kernel always runs "
"at 32 MB\n");
}
}
#endif
}
#ifdef CONFIG_PPC_PSERIES
......@@ -1115,29 +1069,6 @@ static void __init prom_init_mem(void)
RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
}
/*
* If prom_memory_limit is set we reduce the upper limits *except* for
* alloc_top_high. This must be the real top of RAM so we can put
* TCE's up there.
*/
RELOC(alloc_top_high) = RELOC(ram_top);
if (RELOC(prom_memory_limit)) {
if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
RELOC(prom_memory_limit));
RELOC(prom_memory_limit) = 0;
} else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
prom_printf("Ignoring mem=%x >= ram_top.\n",
RELOC(prom_memory_limit));
RELOC(prom_memory_limit) = 0;
} else {
RELOC(ram_top) = RELOC(prom_memory_limit);
RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
}
}
/*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
......@@ -1150,20 +1081,14 @@ static void __init prom_init_mem(void)
RELOC(rmo_top) = RELOC(ram_top);
RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top));
RELOC(alloc_top) = RELOC(rmo_top);
RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
prom_printf(" rmo_top : %x\n", RELOC(rmo_top));
prom_printf(" ram_top : %x\n", RELOC(ram_top));
#ifdef CONFIG_KEXEC
if (RELOC(prom_crashk_base)) {
prom_printf(" crashk_base : %x\n", RELOC(prom_crashk_base));
prom_printf(" crashk_size : %x\n", RELOC(prom_crashk_size));
}
#endif
}
......@@ -1349,16 +1274,10 @@ static void __init prom_initialize_tce_table(void)
reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
if (RELOC(prom_memory_limit)) {
/*
* We align the start to a 16MB boundary so we can map
* the TCE area using large pages if possible.
* The end should be the top of RAM so no need to align it.
*/
RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom,
0x1000000);
RELOC(prom_tce_alloc_end) = local_alloc_top;
}
/* These are only really needed if there is a memory limit in
* effect, but we don't know so export them always. */
RELOC(prom_tce_alloc_start) = local_alloc_bottom;
RELOC(prom_tce_alloc_end) = local_alloc_top;
/* Flag the first invalid entry */
prom_debug("ending prom_initialize_tce_table\n");
......@@ -2041,11 +1960,7 @@ static void __init flatten_device_tree(void)
/* Version 16 is not backward compatible */
hdr->last_comp_version = 0x10;
/* Reserve the whole thing and copy the reserve map in, we
* also bump mem_reserve_cnt to cause further reservations to
* fail since it's too late.
*/
reserve_mem(RELOC(dt_header_start), hdr->totalsize);
/* Copy the reserve map in */
memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map));
#ifdef DEBUG_PROM
......@@ -2058,6 +1973,9 @@ static void __init flatten_device_tree(void)
RELOC(mem_reserve_map)[i].size);
}
#endif
/* Bump mem_reserve_cnt to cause further reservations to fail
* since it's too late.
*/
RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE;
prom_printf("Device tree strings 0x%x -> 0x%x\n",
......@@ -2280,10 +2198,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*/
prom_init_mem();
#ifdef CONFIG_KEXEC
if (RELOC(prom_crashk_base))
reserve_mem(RELOC(prom_crashk_base), RELOC(prom_crashk_size));
#endif
/*
* Determine which cpu is actually running right _now_
*/
......@@ -2317,10 +2231,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
/*
* Fill in some infos for use by the kernel later on
*/
if (RELOC(prom_memory_limit))
prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
&RELOC(prom_memory_limit),
sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(ppc64_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
......@@ -2340,16 +2250,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
}
#endif
#ifdef CONFIG_KEXEC
if (RELOC(prom_crashk_base)) {
prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-base",
PTRRELOC(&prom_crashk_base),
sizeof(RELOC(prom_crashk_base)));
prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-size",
PTRRELOC(&prom_crashk_size),
sizeof(RELOC(prom_crashk_size)));
}
#endif
/*
* Fixup any known bugs in the device-tree
*/
......
arch/powerpc/kernel/prom_parse.c
浏览文件 @ 45c091bb
......@@ -548,3 +548,28 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
return __of_address_to_resource(dev, addrp, size, flags, r);
}
EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
{
u32 *dma_window, cells;
unsigned char *prop;
dma_window = (u32 *)dma_window_prop;
/* busno is always one cell */
*busno = *(dma_window++);
prop = get_property(dn, "ibm,#dma-address-cells", NULL);
if (!prop)
prop = get_property(dn, "#address-cells", NULL);
cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
*phys = of_read_addr(dma_window, cells);
dma_window += cells;
prop = get_property(dn, "ibm,#dma-size-cells", NULL);
cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
*size = of_read_addr(dma_window, cells);
}
arch/powerpc/kernel/ptrace.c
浏览文件 @ 45c091bb
......@@ -404,7 +404,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
ret = ptrace_detach(child, data);
break;
#ifdef CONFIG_PPC64
case PPC_PTRACE_GETREGS: { /* Get GPRs 0 - 31. */
int i;
unsigned long *reg = &((unsigned long *)child->thread.regs)[0];
......@@ -468,7 +467,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
}
break;
}
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_ALTIVEC
case PTRACE_GETVRREGS:
......
arch/powerpc/kernel/rtas-rtc.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/rtas.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/rtas_flash.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/rtas_pci.c
浏览文件 @ 45c091bb
......@@ -313,7 +313,9 @@ unsigned long __init find_and_init_phbs(void)
for (node = of_get_next_child(root, NULL);
node != NULL;
node = of_get_next_child(root, node)) {
if (node->type == NULL || strcmp(node->type, "pci") != 0)
if (node->type == NULL || (strcmp(node->type, "pci") != 0 &&
strcmp(node->type, "pciex") != 0))
continue;
phb = pcibios_alloc_controller(node);
......
arch/powerpc/kernel/setup-common.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/setup.h
浏览文件 @ 45c091bb
......@@ -2,5 +2,8 @@
#define _POWERPC_KERNEL_SETUP_H
void check_for_initrd(void);
void do_init_bootmem(void);
void setup_panic(void);
extern int do_early_xmon;
#endif /* _POWERPC_KERNEL_SETUP_H */
arch/powerpc/kernel/setup_32.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/setup_64.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/signal_32.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/signal_64.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/smp.c
浏览文件 @ 45c091bb
......@@ -492,7 +492,7 @@ int __devinit __cpu_up(unsigned int cpu)
* -- Cort
*/
if (system_state < SYSTEM_RUNNING)
for (c = 5000; c && !cpu_callin_map[cpu]; c--)
for (c = 50000; c && !cpu_callin_map[cpu]; c--)
udelay(100);
#ifdef CONFIG_HOTPLUG_CPU
else
......
arch/powerpc/kernel/systbl.S
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/time.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/traps.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/udbg.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/vdso.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/vector.S
浏览文件 @ 45c091bb
......@@ -53,12 +53,12 @@ fpenable:
stfd fr31,8(r1)
LDCONST(fr1, fpzero)
mffs fr31
mtfsf 0xff,fr1
MTFSF_L(fr1)
blr
fpdisable:
mtlr r12
mtfsf 0xff,fr31
MTFSF_L(fr31)
lfd fr31,8(r1)
lfd fr1,16(r1)
lfd fr0,24(r1)
......
arch/powerpc/kernel/vio.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/kernel/vmlinux.lds.S
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/lib/Makefile
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/lib/bitops.c 已删除 100644 → 0
浏览文件 @ d588fcbe
此差异已折叠。
arch/powerpc/mm/hash_low_32.S
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/hash_low_64.S
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/hash_native_64.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/hash_utils_64.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/lmb.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/mem.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/mmu_context_32.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/mmu_context_64.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/numa.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/ppc_mmu_32.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/slb.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/slb_low.S
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/stab.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/tlb_32.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/mm/tlb_64.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/oprofile/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/oprofile/Makefile
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/oprofile/common.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/85xx/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/85xx/mpc85xx_cds.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/85xx/mpc85xx_cds.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/Kconfig 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/Makefile 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/mpc8641_hpcn.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/mpc86xx.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/mpc86xx_pcie.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/mpc86xx_smp.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/86xx/pci.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/Makefile
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/cbe_regs.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/cbe_regs.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/iommu.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/ras.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/ras.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/cell/setup.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/iseries/dt.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/iseries/mf.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/iseries/vio.c 已删除 100644 → 0
浏览文件 @ d588fcbe
此差异已折叠。
arch/powerpc/platforms/maple/pci.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/platforms/pseries/vio.c 已删除 100644 → 0
浏览文件 @ d588fcbe
此差异已折叠。
arch/powerpc/sysdev/Makefile
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/sysdev/dart_iommu.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/powerpc/sysdev/mpic.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/mm/init.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/mm/mmu_context.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/mm/tlb.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/platforms/4xx/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/platforms/4xx/cpci405.c
浏览文件 @ 45c091bb
此差异已折叠。
arch/ppc/platforms/4xx/cpci405.h
浏览文件 @ 45c091bb
此差异已折叠。
arch/um/sys-ppc/misc.S
浏览文件 @ 45c091bb
此差异已折叠。
drivers/block/viodasd.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/cdrom/viocd.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/char/hvc_console.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/char/hvc_rtas.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/char/hvsi.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/char/viotape.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/i2c/busses/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
drivers/macintosh/via-pmu.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/net/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
drivers/net/ibmveth.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/net/iseries_veth.c
浏览文件 @ 45c091bb
此差异已折叠。
drivers/net/phy/Kconfig
浏览文件 @ 45c091bb
此差异已折叠。
drivers/net/phy/Makefile
浏览文件 @ 45c091bb
此差异已折叠。
drivers/net/phy/vitesse.c 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/bitops.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/cputable.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/delay.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/eeh.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/eeh_event.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/elf.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/hvcall.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/immap_86xx.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/io.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/iommu.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/irq.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/kdump.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/kexec.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/machdep.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/mmu.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/mmu_context.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/mpc86xx.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/mpic.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/paca.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/page.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/pci-bridge.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/pgtable-4k.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/pgtable-64k.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/pgtable.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/processor.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/prom.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/ptrace.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/reg.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/rtas.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/spu.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/spu_csa.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/spu_priv1.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/systbl.h 0 → 100644
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/tce.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/topology.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/udbg.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-powerpc/vio.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-ppc/mmu.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-ppc/mmu_context.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-ppc/mpc85xx.h
浏览文件 @ 45c091bb
此差异已折叠。
include/asm-ppc/pgtable.h
浏览文件 @ 45c091bb
此差异已折叠。
include/linux/delay.h
浏览文件 @ 45c091bb
此差异已折叠。
include/linux/prctl.h
浏览文件 @ 45c091bb
此差异已折叠。
kernel/sys.c
浏览文件 @ 45c091bb
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或