Merge branch 'devel' of...

Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable

MAINTAINERS

@@ -707,6 +707,19 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
+ARM/INTEL RESEARCH IMOTE 2 MACHINE SUPPORT
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/imote2.c
+
+ARM/INTEL RESEARCH STARGATE 2 MACHINE SUPPORT
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/stargate2.c
+F:	drivers/pcmcia/pxa2xx_stargate2.c
+
 ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>

arch/arm/mach-mmp/aspenite.c

@@ -13,6 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -85,12 +88,48 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static struct mtd_partition aspenite_nand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct pxa3xx_nand_platform_data aspenite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);

arch/arm/mach-mmp/clock.c

@@ -34,6 +34,21 @@ struct clkops apbc_clk_ops = {
 	.disable	= apbc_clk_disable,
 };
 
+static void apmu_clk_enable(struct clk *clk)
+{
+	__raw_writel(clk->enable_val, clk->clk_rst);
+}
+
+static void apmu_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apmu_clk_ops = {
+	.enable		= apmu_clk_enable,
+	.disable	= apmu_clk_disable,
+};
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)

arch/arm/mach-mmp/clock.h

@@ -25,6 +25,7 @@ struct clk {
 };
 
 extern struct clkops apbc_clk_ops;
+extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\

arch/arm/mach-mmp/include/mach/irqs.h

@@ -31,7 +31,9 @@
 #define IRQ_PXA168_DDR_INT		26
 #define IRQ_PXA168_UART1		27
 #define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_UART3		29
 #define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_MAIN_PMU		36
 #define IRQ_PXA168_FRQ_CHANGE		38
 #define IRQ_PXA168_SDH1			39
 #define IRQ_PXA168_SDH2			40
@@ -46,7 +48,7 @@
 #define IRQ_PXA168_USB2			51
 #define IRQ_PXA168_AC97			57
 #define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_AP_PMU		60
 #define IRQ_PXA168_SM_INT		63
 
 /*

arch/arm/mach-mmp/include/mach/pxa168.h

@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa168_device_pwm1;
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa168_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA168_H */

arch/arm/mach-mmp/include/mach/pxa910.h

@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa910_device_pwm1;
 extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
+extern struct pxa_device_desc pxa910_device_nand;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa910_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA910_H */

arch/arm/mach-mmp/pxa168.c

@@ -19,6 +19,7 @@
 #include <mach/addr-map.h>
 #include <mach/cputype.h>
 #include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/dma.h>
@@ -72,6 +73,8 @@ static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -82,6 +85,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -127,3 +131,4 @@ PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);

arch/arm/mach-mmp/pxa910.c

@@ -110,6 +110,8 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -120,6 +122,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -174,3 +177,4 @@ PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);

arch/arm/mach-mmp/ttc_dkb.c

@@ -11,9 +11,13 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
@@ -26,6 +30,86 @@ static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
 	GPIO48_UART2_TXD,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct mtd_partition ttc_dkb_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data ttc_dkb_onenand_info = {
+	.parts		= ttc_dkb_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
+};
+
+static struct resource ttc_dkb_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ttc_dkb_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= ttc_dkb_resource_onenand,
+	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
+	.dev		= {
+		.platform_data	= &ttc_dkb_onenand_info,
+	},
+};
+
+static struct platform_device *ttc_dkb_devices[] = {
+	&ttc_dkb_device_onenand,
 };
 
 static void __init ttc_dkb_init(void)
@@ -34,6 +118,9 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")

arch/arm/mach-pxa/Kconfig

@@ -2,34 +2,105 @@ if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA300
-	bool "PXA300 (codename Monahans-L)"
+config MACH_MAINSTONE
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA310
-	bool "PXA310 (codename Monahans-LV)"
+config MACH_ZYLONITE
+	bool
+	select PXA3xx
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
 	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
 
-config CPU_PXA320
-	bool "PXA320 (codename Monahans-P)"
+config MACH_ZYLONITE320
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
 
-config CPU_PXA930
-	bool "PXA930 (codename Tavor-P)"
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select PXA3xx
+	select PXA_SSP
 
-config CPU_PXA935
-	bool "PXA935 (codename Tavor-P65)"
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
 	select CPU_PXA930
 
-config CPU_PXA950
-	bool "PXA950 (codename Tavor-PV2)"
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
 	select CPU_PXA930
 
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
 
-endif
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	select PXA25x
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select PXA27x
+	select IWMMXT
+	select PXA25x
+	select PXA_SSP
+
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
+	select PXA27x
+
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -62,185 +133,24 @@ config MACH_STARGATE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform"
-	select PXA25x
-	select SA1111
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform"
-	select PXA27x
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	select PXA25x
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	select PXA27x
-	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
-
-config PXA_SHARPSL
-	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
-	select SHARP_PARAM
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
-	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
-	  handheld computer.
-
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
-config CORGI_SSP_DEPRECATED
-	bool
-	select PXA_SSP
-	help
-	  This option will include corgi_ssp.c and corgi_lcd.c
-	  that corgi_ts.c and other legacy drivers (corgi_bl.c
-	  and sharpsl_pm.c) may depend on.
-
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
 	select PXA25x
-	select SHARP_LOCOMO
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
 	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-	select PXA_HAVE_ISA_IRQS
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
 
 config TRIZEPS_PXA
 	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
@@ -274,13 +184,38 @@ config TRIZEPS_PCMCIA
 	help
 	  Enable PCMCIA support for Trizeps modules
 
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	select HAVE_PWM
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
 
 config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
@@ -290,45 +225,15 @@ config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
 	select CPU_PXA300
+	select CPU_PXA310
+	select HAVE_PWM
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
 	select PXA3xx
 	select CPU_PXA320
 
-config MACH_ZYLONITE
-	bool "PXA3xx Development Platform (aka Zylonite)"
-	select PXA3xx
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select PXA_SSP
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select PXA_SSP
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
+comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
@@ -338,6 +243,15 @@ config MACH_H4700
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -346,11 +260,6 @@ config MACH_MAGICIAN
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-	select FB_W100
-
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select PXA27x
@@ -362,13 +271,47 @@ config MACH_MIOA701
 	  MIO A701. Currently there is only basic support
 	  for this PDA.
 
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+config PXA_EZX
+	bool "Motorola EZX Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
+	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
+
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
@@ -421,109 +364,172 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
-config MACH_TREO680
-	bool "Palm Treo 680"
+config MACH_PALMLD
+	bool "Palm LifeDrive"
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
 	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 	  smartphone.
 
-config MACH_PALMLD
-	bool "Palm LifeDrive"
+config MACH_TREO680
+	bool "Palm Treo 680"
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select PALM_TREO
 	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
+config PXA_SHARPSL
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	select SHARP_SCOOP
+	select SHARP_PARAM
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
 
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
+config CORGI_SSP_DEPRECATED
+	bool
+	select PXA_SSP
+	help
+	  This option will include corgi_ssp.c and corgi_lcd.c
+	  that corgi_ts.c and other legacy drivers (corgi_bl.c
+	  and sharpsl_pm.c) may depend on.
 
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
 
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-config PCM990_DISPLAY_NONE
-	bool "no display"
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-endchoice
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
 	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
 
-config CSB726_CSB701
-	bool "Enable supprot for CSB701 baseboard"
-	depends on MACH_CSB726
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
 
-config PXA_EZX
-	bool "Motorola EZX Platform"
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
 	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
+config ARCH_PXA_ESERIES
+	bool "PXA based Toshiba e-series PDAs"
+	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
+config MACH_E330
+	bool "Toshiba e330"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e330 family PDA.
 
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
+config MACH_E350
+	bool "Toshiba e350"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
 
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
+config MACH_E740
+	bool "Toshiba e740"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e740 family PDA.
 
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
+config MACH_E750
+	bool "Toshiba e750"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e750 family PDA.
 
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
+config MACH_E400
+	bool "Toshiba e400"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e400 family PDA.
 
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PARTITIONS
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	select PXA_SSP
+config MACH_E800
+	bool "Toshiba e800"
+	default y
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e800 family PDA.
 
 endmenu
 
@@ -551,6 +557,42 @@ config PXA3xx
 	help
 	  Select code specific to PXA3xx variants
 
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+	bool
+	select CPU_PXA930
+	help
+	  PXA950 (codename Tavor-PV2)
+
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP

arch/arm/mach-pxa/Makefile

@@ -24,33 +24,63 @@ obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
-# Specific board support
-obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
-obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
+
+# 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
+obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
+obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
+obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
+obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -58,34 +88,6 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_TREO680)	+= treo680.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
-  obj-y				+= zylonite.o
-  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
-  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -95,8 +97,4 @@ led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o

arch/arm/mach-pxa/balloon3.c

@@ -306,6 +306,10 @@ static void __init balloon3_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
 		pxa_set_ac97_info(NULL);

arch/arm/mach-pxa/cm-x2xx.c

@@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {}
 
 static void __init cmx2xx_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	cmx2xx_pm_init();
 
 	if (cpu_is_pxa25x())

arch/arm/mach-pxa/cm-x300.c

@@ -3,9 +3,10 @@
  *
  * Support for the CompuLab CM-X300 modules
  *
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
  *
  * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
 #include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
 
 #include <asm/mach/map.h>
 
 #include "generic.h"
+#include "devices.h"
 
 #define CM_X300_ETH_PHYS	0x08000010
 
@@ -53,7 +65,7 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
 	GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO36_UART1_DTR,
 
 	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
@@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* PWM Backlight */
+	GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO77_GPIO,			/* WiFi reset */
+	GPIO78_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO76_GPIO,			/* LED */
+	GPIO71_GPIO,			/* WiFi reset */
+	GPIO70_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+	/* USB PORT 2 */
+	ULPI_STP,
+	ULPI_NXT,
+	ULPI_DIR,
+	GPIO30_ULPI_DATA_OUT_0,
+	GPIO31_ULPI_DATA_OUT_1,
+	GPIO32_ULPI_DATA_OUT_2,
+	GPIO33_ULPI_DATA_OUT_3,
+	GPIO34_ULPI_DATA_OUT_4,
+	GPIO35_ULPI_DATA_OUT_5,
+	GPIO36_ULPI_DATA_OUT_6,
+	GPIO37_ULPI_DATA_OUT_7,
+	GPIO38_ULPI_CLK,
+	/* external PHY reset pin */
+	GPIO127_GPIO,
+
+	/* USB PORT 3 */
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+	GPIO0_2_USBH_PEN,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void)
 static inline void cm_x300_init_dm9000(void) {}
 #endif
 
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 	[0] = {
-		.pixclock	= 38000,
+		.pixclock	= 38250,
 		.bpp		= 16,
 		.xres		= 480,
 		.yres		= 640,
 		.hsync_len	= 8,
 		.vsync_len	= 2,
 		.left_margin	= 8,
-		.upper_margin	= 0,
+		.upper_margin	= 2,
 		.right_margin	= 24,
 		.lower_margin	= 4,
 		.cmap_greyscale	= 0,
@@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 
 static struct pxafb_mach_info cm_x300_lcd = {
 	.modes			= cm_x300_lcd_modes,
-	.num_modes		= 2,
+	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
@@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void)
 static inline void cm_x300_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+	.pwm_id		= 2,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data	= &cm_x300_backlight_data,
+	},
+};
+
+static void cm_x300_init_bl(void)
+{
+	platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE	(144)
+#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
+#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
+#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
+#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM	(1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+	.sck		= GPIO_LCD_SCL,
+	.mosi		= GPIO_LCD_DIN,
+	.miso		= GPIO_LCD_DOUT,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+	.name		= "spi_gpio",
+	.id		= LCD_SPI_BUS_NUM,
+	.dev		= {
+		.platform_data	= &cm_x300_spi_gpio_pdata,
+	},
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= LCD_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.controller_data	= (void *) GPIO_LCD_CS,
+		.platform_data		= &cm_x300_tdo24m_pdata,
+	},
+};
+
+static void __init cm_x300_init_spi(void)
+{
+	spi_register_board_info(cm_x300_spi_devices,
+				ARRAY_SIZE(cm_x300_spi_devices));
+	platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
@@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {}
 #endif
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+	if (cpu_is_pxa300())
+		UP2OCR = UP2OCR_HXS
+			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
 static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+	.init		= cm_x300_ohci_init,
 };
 
 static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = {
 	[0] = {
 		.name = "cm-x300:green",
 		.default_trigger = "heartbeat",
-		.gpio = 79,
 		.active_low = 1,
 	},
 };
@@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = {
 
 static void __init cm_x300_init_leds(void)
 {
+	if (system_rev < 130)
+		cm_x300_leds[0].gpio = 79;
+	else
+		cm_x300_leds[0].gpio = 76;
+
 	platform_device_register(&cm_x300_led_device);
 }
 #else
@@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void)
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+	{
+		.name = "da903x-backlight",
+		.id = DA9030_ID_WLED,
+	}
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+	.subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+	int bt_reset, wlan_en;
+	int err;
+
+	if (system_rev < 130) {
+		wlan_en = 77;
+		bt_reset = 78;
+	} else {
+		wlan_en = 71;
+		bt_reset = 70;
+	}
+
+	/* Libertas and CSR reset */
+	err = gpio_request(wlan_en, "wlan en");
+	if (err) {
+		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+	} else {
+		gpio_direction_output(wlan_en, 1);
+		gpio_free(wlan_en);
+	}
+
+	err = gpio_request(bt_reset, "bt reset");
+	if (err) {
+		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+	} else {
+		gpio_direction_output(bt_reset, 1);
+		udelay(10);
+		gpio_set_value(bt_reset, 0);
+		udelay(10);
+		gpio_set_value(bt_reset, 1);
+		gpio_free(bt_reset);
+	}
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
 {
 	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+
+	if (system_rev < 130)
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+	else
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+	cm_x300_init_mfp();
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
+	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
 	cm_x300_init_ohci();
@@ -445,7 +679,11 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_spi();
 	cm_x300_init_rtc();
+	cm_x300_init_ac97();
+	cm_x300_init_wi2wi();
+	cm_x300_init_bl();
 }
 
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,

arch/arm/mach-pxa/colibri-pxa270.c

@@ -130,6 +130,9 @@ static struct platform_device *colibri_pxa270_devices[] __initdata = {
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
 }
 

arch/arm/mach-pxa/colibri-pxa300.c

@@ -170,6 +170,10 @@ static inline void colibri_pxa310_init_ac97(void) {}
 
 void __init colibri_pxa300_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
 	colibri_pxa3xx_init_nand();

arch/arm/mach-pxa/colibri-pxa320.c

@@ -199,6 +199,10 @@ static void __init colibri_pxa320_init_uart(void)
 
 void __init colibri_pxa320_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
 	colibri_pxa3xx_init_nand();

arch/arm/mach-pxa/colibri-pxa3xx.c

@@ -25,7 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/corgi.c

@@ -671,6 +671,10 @@ static void __init corgi_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);

arch/arm/mach-pxa/corgi_pm.c

@@ -214,8 +214,8 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,

arch/arm/mach-pxa/csb726.c

@@ -268,6 +268,9 @@ static void __init csb726_init(void)
 /*	MSC2 = 0x06697ff4; *//* none/SM501 */
 	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);

arch/arm/mach-pxa/devices.c

@@ -4,17 +4,18 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
+#include <mach/hardware.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -167,13 +168,18 @@ static struct resource pxa_resource_ffuart[] = {
 	}
 };
 
-struct platform_device pxa_device_ffuart= {
+struct platform_device pxa_device_ffuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
 	.resource	= pxa_resource_ffuart,
 	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
 };
 
+void __init pxa_set_ffuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_ffuart, info);
+}
+
 static struct resource pxa_resource_btuart[] = {
 	{
 		.start	= 0x40200000,
@@ -193,6 +199,11 @@ struct platform_device pxa_device_btuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
 };
 
+void __init pxa_set_btuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_btuart, info);
+}
+
 static struct resource pxa_resource_stuart[] = {
 	{
 		.start	= 0x40700000,
@@ -212,6 +223,11 @@ struct platform_device pxa_device_stuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
 };
 
+void __init pxa_set_stuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_stuart, info);
+}
+
 static struct resource pxa_resource_hwuart[] = {
 	{
 		.start	= 0x41600000,
@@ -231,6 +247,14 @@ struct platform_device pxa_device_hwuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
 };
 
+void __init pxa_set_hwuart_info(void *info)
+{
+	if (cpu_is_pxa255())
+		pxa_register_device(&pxa_device_hwuart, info);
+	else
+		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
 static struct resource pxai2c_resources[] = {
 	{
 		.start	= 0x40301680,

arch/arm/mach-pxa/e330.c

@@ -55,6 +55,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e330_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/e350.c

@@ -56,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e350_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/e400.c

@@ -130,6 +130,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();

arch/arm/mach-pxa/e740.c

@@ -192,6 +192,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),

arch/arm/mach-pxa/e750.c

@@ -194,6 +194,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e750_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();

arch/arm/mach-pxa/e800.c

@@ -195,6 +195,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();

arch/arm/mach-pxa/em-x270.c

@@ -967,7 +967,7 @@ static inline void em_x270_init_gpio_keys(void) {}
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 static struct regulator *em_x270_camera_ldo;
 
-static int em_x270_sensor_init(struct device *dev)
+static int em_x270_sensor_init(void)
 {
 	int ret;
 
@@ -996,7 +996,6 @@ static int em_x270_sensor_init(struct device *dev)
 }
 
 struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.init	= em_x270_sensor_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 	.mclk_10khz = 2600,
@@ -1049,8 +1048,10 @@ static struct platform_device em_x270_camera = {
 
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_camera_info(&em_x270_camera_platform_data);
-	platform_device_register(&em_x270_camera);
+	if (em_x270_sensor_init() == 0) {
+		pxa_set_camera_info(&em_x270_camera_platform_data);
+		platform_device_register(&em_x270_camera);
+	}
 }
 #else
 static inline void em_x270_init_camera(void) {}
@@ -1286,6 +1287,10 @@ static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 #ifdef CONFIG_PM
 	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
 #endif

arch/arm/mach-pxa/ezx.c

@@ -17,7 +17,11 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -29,6 +33,7 @@
 #include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -38,6 +43,9 @@
 #define GPIO15_A910_FLIP_LID 		15
 #define GPIO12_E680_LOCK_SWITCH 	12
 #define GPIO15_E6_LOCK_SWITCH 		15
+#define GPIO50_nCAM_EN			50
+#define GPIO19_GEN1_CAM_RST		19
+#define GPIO28_GEN2_CAM_RST		28
 
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
@@ -191,8 +199,8 @@ static unsigned long gen1_pin_config[] __initdata = {
 	GPIO94_CIF_DD_5,
 	GPIO17_CIF_DD_6,
 	GPIO108_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO19_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 
 	/* EMU */
 	GPIO120_GPIO,				/* EMU_MUX1 */
@@ -248,8 +256,8 @@ static unsigned long gen2_pin_config[] __initdata = {
 	GPIO48_CIF_DD_5,
 	GPIO93_CIF_DD_6,
 	GPIO12_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO28_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 	GPIO17_GPIO,				/* CAM_FLASH */
 };
 #endif
@@ -683,6 +691,81 @@ static struct platform_device a780_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a780_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO19_GEN1_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+	.bus_id         = 0,
+	.flags          = SOCAM_SENSOR_INVERT_PCLK,
+	.i2c_adapter_id = 0,
+	.board_info     = &a780_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a780_camera_power,
+	.reset          = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a780_iclink,
+	},
+};
+
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
 };
@@ -693,12 +776,21 @@ static void __init a780_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 
 	set_pxa_fb_info(&ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
+	if (a780_camera_init() == 0) {
+		pxa_set_camera_info(&a780_pxacamera_platform_data);
+		platform_device_register(&a780_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -754,6 +846,10 @@ static void __init e680_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
@@ -816,6 +912,10 @@ static void __init a1200_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
@@ -864,6 +964,131 @@ static struct platform_device a910_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a910_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO28_GEN2_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+	.bus_id         = 0,
+	.i2c_adapter_id = 0,
+	.board_info     = &a910_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a910_camera_power,
+	.reset          = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a910_iclink,
+	},
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+	.leds_size = LP3944_LEDS_MAX,
+	.leds = {
+		[0] = {
+			.name = "a910:red:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[1] = {
+			.name = "a910:green:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[2] {
+			.name = "a910:blue:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		/* Leds 3 and 4 are used as display power switches */
+		[3] = {
+			.name = "a910::cli_display",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[4] = {
+			.name = "a910::main_display",
+			.status = LP3944_LED_STATUS_ON,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[5] = { .type = LP3944_LED_TYPE_NONE },
+		[6] = {
+			.name = "a910::torch",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[7] = {
+			.name = "a910::flash",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED,
+		},
+	},
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("lp3944", 0x60),
+		.platform_data = &a910_lp3944_leds,
+	},
+};
+
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
 };
@@ -874,12 +1099,22 @@ static void __init a910_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
 	set_pxa_fb_info(&ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
+	if (a910_camera_init() == 0) {
+		pxa_set_camera_info(&a910_pxacamera_platform_data);
+		platform_device_register(&a910_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -935,6 +1170,10 @@ static void __init e6_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
@@ -971,6 +1210,10 @@ static void __init e2_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 

arch/arm/mach-pxa/generic.h

@@ -67,3 +67,8 @@ extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
 extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);

arch/arm/mach-pxa/gumstix.c

@@ -211,6 +211,11 @@ static void __init gumstix_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();

arch/arm/mach-pxa/h5000.c

@@ -193,6 +193,9 @@ static void __init h5000_init(void)
 	fix_msc();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_udc_info(&h5000_udc_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }

arch/arm/mach-pxa/himalaya.c

@@ -150,6 +150,9 @@ static void __init himalaya_lcd_init(void)
 
 static void __init himalaya_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	himalaya_lcd_init();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }

arch/arm/mach-pxa/hx4700.c

@@ -820,6 +820,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_keys,
 	&backlight,
 	&w3220,
+	&hx4700_lcd,
 	&egpio,
 	&bq24022,
 	&gpio_vbus,
@@ -849,6 +850,10 @@ static void __init hx4700_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
 	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	pxa_set_ficp_info(&ficp_info);

arch/arm/mach-pxa/idp.c

@@ -179,6 +179,9 @@ static void __init idp_init(void)
 	printk("idp_init()\n");
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);

arch/arm/mach-pxa/imote2.c

@@ -554,8 +554,12 @@ static struct i2c_pxa_platform_data i2c_pdata = {
 
 static void __init imote2_init(void)
 {
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);

arch/arm/mach-pxa/include/mach/hardware.h

@@ -105,6 +105,7 @@
  *
  *  PXA935	A0	0x56056931	0x1E653013
  *  PXA935	B0	0x56056936	0x6E653013
+ *  PXA935	B1	0x56056938	0x8E653013
  */
 #ifdef CONFIG_PXA25x
 #define __cpu_is_pxa210(id)				\
@@ -283,7 +284,7 @@
 		_id == 0x3;				\
 	 })
 
-#define __cpu_is_pxa9xx(id)				\
+#define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
@@ -299,9 +300,9 @@
 		__cpu_is_pxa3xx(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa9xx()					\
+#define cpu_is_pxa93x()					\
 	({						\
-		__cpu_is_pxa9xx(read_cpuid_id());	\
+		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
 /*
  * return current memory and LCD clock frequency in units of 10kHz