ide: remove CONFIG_BLK_DEV_IDE config option (take 2)

Because hd.c was moved to drivers/block/ this config option
is superfluous now and may be removed.

v2:
Fix drivers/ide/Makefile (noticed by Adrian Bunk).

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/Kconfig

@@ -54,38 +54,6 @@ menuconfig IDE
 
 if IDE
 
-config BLK_DEV_IDE
-	tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
-	---help---
-	  If you say Y here, you will use the full-featured IDE driver to
-	  control up to ten ATA/IDE interfaces, each being able to serve a
-	  "master" and a "slave" device, for a total of up to twenty ATA/IDE
-	  disk/cdrom/tape/floppy drives.
-
-	  Useful information about large (>540 MB) IDE disks, multiple
-	  interfaces, what to do if ATA/IDE devices are not automatically
-	  detected, sound card ATA/IDE ports, module support, and other
-	  topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
-	  information about hard drives, consult the Disk-HOWTO and the
-	  Multi-Disk-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To fine-tune ATA/IDE drive/interface parameters for improved
-	  performance, look for the hdparm package at
-	  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
-	  Do not compile this driver as a module if your root file system (the
-	  one containing the directory /) is located on an IDE device.
-
-	  If you have one or more IDE drives, say Y or M here. If your system
-	  has no IDE drives, or if memory requirements are really tight, you
-	  could say N here, and select the "Old hard disk driver" below
-	  instead to save about 13 KB of memory in the kernel.
-
-if BLK_DEV_IDE
-
 comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
 
 config IDE_TIMINGS
@@ -348,7 +316,7 @@ config BLK_DEV_IDEPCI
 
 config IDEPCI_PCIBUS_ORDER
 	bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
-	depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+	depends on IDE=y && BLK_DEV_IDEPCI
 	default y
 	help
 	  Probe IDE PCI devices in the order in which they appear on the
@@ -729,7 +697,7 @@ endif
 
 config BLK_DEV_IDE_PMAC
 	tristate "PowerMac on-board IDE support"
-	depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
+	depends on PPC_PMAC && IDE=y
 	select IDE_TIMINGS
 	help
 	  This driver provides support for the on-board IDE controller on
@@ -963,6 +931,4 @@ config BLK_DEV_IDEDMA
 	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
 		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 
-endif
-
 endif # IDE

drivers/ide/Makefile

@@ -15,14 +15,14 @@ ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o
 ide-core-$(CONFIG_IDE_PROC_FS)		+= ide-proc.o
 ide-core-$(CONFIG_BLK_DEV_IDEACPI)	+= ide-acpi.o
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= ide-core.o
+obj-$(CONFIG_IDE)			+= ide-core.o
 
 ifeq ($(CONFIG_IDE_ARM), y)
 	ide-arm-core-y += arm/ide_arm.o
 	obj-y += ide-arm-core.o
 endif
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ pci/
+obj-$(CONFIG_IDE)			+= legacy/ pci/
 
 obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o
 
@@ -31,7 +31,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
 	obj-y += cmd640-core.o
 endif
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= ppc/
+obj-$(CONFIG_IDE)			+= ppc/
 obj-$(CONFIG_IDE_H8300)			+= h8300/
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o
@@ -54,4 +54,4 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
 	obj-y += ide-platform-core.o
 endif
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= arm/ mips/
+obj-$(CONFIG_IDE)			+= arm/ mips/