trivial: fix typo "for for" in multiple files

trivial: fix typo "for for" in multiple files
Signed-off-by: NAnand Gadiyar <gadiyar@ti.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Documentation/filesystems/nfsroot.txt

@@ -105,7 +105,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 		the client address and this parameter is NOT empty only
 		replies from the specified server are accepted.
 
-		Only required for for NFS root. That is autoconfiguration
+		Only required for NFS root. That is autoconfiguration
 		will not be triggered if it is missing and NFS root is not
 		in operation.
 

Documentation/powerpc/dts-bindings/marvell.txt

@@ -32,7 +32,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
       devices.  This field represents the number of cells needed to
       represent the address of the memory-mapped registers of devices
       within the system controller chip.
-    - #size-cells : Size representation for for the memory-mapped
+    - #size-cells : Size representation for the memory-mapped
       registers within the system controller chip.
     - #interrupt-cells : Defines the width of cells used to represent
       interrupts.

arch/blackfin/mach-bf538/include/mach/defBF539.h

@@ -2325,7 +2325,7 @@
 #define	AMBEN_B0_B1	0x0004	/* Enable Asynchronous Memory Banks 0 &	1 only */
 #define	AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
 #define	AMBEN_ALL	0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1,	2, and 3 */
-#define	CDPRIO		0x0100	/* DMA has priority over core for for external accesses */
+#define	CDPRIO		0x0100	/* DMA has priority over core for external accesses */
 
 /* EBIU_AMGCTL Bit Positions */
 #define	AMCKEN_P		0x0000	/* Enable CLKOUT */

arch/powerpc/kernel/udbg_16550.c

 /*
- * udbg for for NS16550 compatable serial ports
+ * udbg for NS16550 compatable serial ports
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *

arch/powerpc/platforms/powermac/udbg_scc.c

 /*
- * udbg for for zilog scc ports as found on Apple PowerMacs
+ * udbg for zilog scc ports as found on Apple PowerMacs
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *

drivers/edac/edac_core.h

@@ -286,7 +286,7 @@ enum scrub_type {
  *			is irrespective of the memory devices being mounted
  *			on both sides of the memory stick.
  *
- * Socket set:		All of the memory sticks that are required for for
+ * Socket set:		All of the memory sticks that are required for
  *			a single memory access or all of the memory sticks
  *			spanned by a chip-select row.  A single socket set
  *			has two chip-select rows and if double-sided sticks

drivers/infiniband/hw/ipath/ipath_iba6110.c

@@ -809,7 +809,7 @@ static int ipath_setup_ht_reset(struct ipath_devdata *dd)
  * errors.  We only bother to do this at load time, because it's OK if
  * it happened before we were loaded (first time after boot/reset),
  * but any time after that, it's fatal anyway.  Also need to not check
- * for for upper byte errors if we are in 8 bit mode, so figure out
+ * for upper byte errors if we are in 8 bit mode, so figure out
  * our width.  For now, at least, also complain if it's 8 bit.
  */
 static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,

drivers/isdn/i4l/isdn_common.c

@@ -761,7 +761,7 @@ isdn_getnum(char **p)
  * Be aware that this is not an atomic operation when sleep != 0, even though 
  * interrupts are turned off! Well, like that we are currently only called
  * on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
  * takes care that this is not called for the same minor device number while
  * we are sleeping, but access is not serialized against simultaneous read()
  * from the corresponding ttyI device. Can other ugly events, like changes
@@ -873,7 +873,7 @@ isdn_readbchan(int di, int channel, u_char * buf, u_char * fp, int len, wait_que
  * Be aware that this is not an atomic operation when sleep != 0, even though
  * interrupts are turned off! Well, like that we are currently only called
  * on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
  * takes care that this is not called for the same minor device number while
  * we are sleeping, but access is not serialized against simultaneous read()
  * from the corresponding ttyI device. Can other ugly events, like changes

drivers/md/md.h

@@ -201,7 +201,7 @@ struct mddev_s
 	 * INTR:     resync needs to be aborted for some reason
 	 * DONE:     thread is done and is waiting to be reaped
 	 * REQUEST:  user-space has requested a sync (used with SYNC)
-	 * CHECK:    user-space request for for check-only, no repair
+	 * CHECK:    user-space request for check-only, no repair
 	 * RESHAPE:  A reshape is happening
 	 *
 	 * If neither SYNC or RESHAPE are set, then it is a recovery.

drivers/net/bnx2x_reg.h

@@ -3122,7 +3122,7 @@
    The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
    header pointer. */
 #define TCM_REG_XX_TABLE					 0x50240
-/* [RW 4] Load value for for cfc ac credit cnt. */
+/* [RW 4] Load value for cfc ac credit cnt. */
 #define TM_REG_CFC_AC_CRDCNT_VAL				 0x164208
 /* [RW 4] Load value for cfc cld credit cnt. */
 #define TM_REG_CFC_CLD_CRDCNT_VAL				 0x164210

drivers/net/rionet.c

@@ -72,7 +72,7 @@ static int rionet_check = 0;
 static int rionet_capable = 1;
 
 /*
- * This is a fast lookup table for for translating TX
+ * This is a fast lookup table for translating TX
  * Ethernet packets into a destination RIO device. It
  * could be made into a hash table to save memory depending
  * on system trade-offs.

drivers/usb/host/ehci-pci.c

@@ -242,7 +242,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	 * System suspend currently expects to be able to suspend the entire
 	 * device tree, device-at-a-time.  If we failed selective suspend
 	 * reports, system suspend would fail; so the root hub code must claim
-	 * success.  That's lying to usbcore, and it matters for for runtime
+	 * success.  That's lying to usbcore, and it matters for runtime
 	 * PM scenarios with selective suspend and remote wakeup...
 	 */
 	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))

drivers/usb/host/ehci.h

@@ -37,7 +37,7 @@ typedef __u16 __bitwise __hc16;
 #define __hc16	__le16
 #endif
 
-/* statistics can be kept for for tuning/monitoring */
+/* statistics can be kept for tuning/monitoring */
 struct ehci_stats {
 	/* irq usage */
 	unsigned long		normal;

fs/xfs/xfs_fs.h

@@ -117,7 +117,7 @@ struct getbmapx {
 #define BMV_IF_VALID	\
 	(BMV_IF_ATTRFORK|BMV_IF_NO_DMAPI_READ|BMV_IF_PREALLOC|BMV_IF_DELALLOC)
 
-/*	bmv_oflags values - returned for for each non-header segment */
+/*	bmv_oflags values - returned for each non-header segment */
 #define BMV_OF_PREALLOC		0x1	/* segment = unwritten pre-allocation */
 #define BMV_OF_DELALLOC		0x2	/* segment = delayed allocation */
 #define BMV_OF_LAST		0x4	/* segment is the last in the file */

include/linux/usb.h

@@ -1071,7 +1071,7 @@ typedef void (*usb_complete_t)(struct urb *);
  * @start_frame: Returns the initial frame for isochronous transfers.
  * @number_of_packets: Lists the number of ISO transfer buffers.
  * @interval: Specifies the polling interval for interrupt or isochronous
- *	transfers.  The units are frames (milliseconds) for for full and low
+ *	transfers.  The units are frames (milliseconds) for full and low
  *	speed devices, and microframes (1/8 millisecond) for highspeed ones.
  * @error_count: Returns the number of ISO transfers that reported errors.
  * @context: For use in completion functions.  This normally points to