Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 3eab8095 编写于 作者: M Manuel Lauss 提交者： Ralf Baechle
浏览文件
操作

MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. 

With a generic plat_irq_dispatch (for Alchemy at least) code for both
interrupt controller types can coexist in a single kernel image and be
autodetected at runtime.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2935/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 894cc87e
展开全部 隐藏空白更改
内联 并排
Showing with 550 addition and 587 deletion
arch/mips/alchemy/common/Makefile
浏览文件 @ 3eab8095
......@@ -6,10 +6,7 @@
#
obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o vss.o
obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
obj-$(CONFIG_ALCHEMY_GPIOINT_AU1300) += gpioint.o
sleeper.o dma.o dbdma.o vss.o irq.o
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
......
arch/mips/alchemy/common/gpioint.c 已删除 100644 → 0
浏览文件 @ 894cc87e
/*
* gpioint.c - Au1300 GPIO+Interrupt controller (I call it "GPIC") support.
*
* Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com>
*
* licensed under the GPLv2.
*/
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/types.h>
#include <asm/irq_cpu.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio-au1300.h>
static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
/* setup for known onchip sources */
struct gpic_devint_data {
int irq; /* linux IRQ number */
int type; /* IRQ_TYPE_ */
int prio; /* irq priority, 0 highest, 3 lowest */
int internal; /* internal source (no ext. pin)? */
};
static const struct gpic_devint_data au1300_devints[] __initdata = {
/* multifunction: gpio pin or device */
{ AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
{ AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, },
/* au1300 internal */
{ AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, },
{ AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, },
{ AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, },
{ -1, }, /* terminator */
};
/*
* au1300_gpic_chgcfg - change PIN configuration.
* @gpio: pin to change (0-based GPIO number from datasheet).
* @clr: clear all bits set in 'clr'.
* @set: set these bits.
*
* modifies a pins' configuration register, bits set in @clr will
* be cleared in the register, bits in @set will be set.
*/
static inline void au1300_gpic_chgcfg(unsigned int gpio,
unsigned long clr,
unsigned long set)
{
void __iomem *r = AU1300_GPIC_ADDR;
unsigned long l;
r += gpio * 4; /* offset into pin config array */
l = __raw_readl(r + AU1300_GPIC_PINCFG);
l &= ~clr;
l |= set;
__raw_writel(l, r + AU1300_GPIC_PINCFG);
wmb();
}
/*
* au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
* @pin: pin (0-based GPIO number from datasheet).
*
* Assigns a GPIO pin to the GPIO controller, so its level can either
* be read or set through the generic GPIO functions.
* If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
* REVISIT: is this function really necessary?
*/
void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
{
au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
}
EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
/*
* au1300_pinfunc_to_dev - assign a pin to the device function.
* @pin: pin (0-based GPIO number from datasheet).
*
* Assigns a GPIO pin to its associated device function; the pin will be
* driven by the device and not through GPIO functions.
*/
void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
{
void __iomem *r = AU1300_GPIC_ADDR;
unsigned long bit;
r += GPIC_GPIO_BANKOFF(gpio);
bit = GPIC_GPIO_TO_BIT(gpio);
__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
wmb();
}
EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
/*
* au1300_set_irq_priority - set internal priority of IRQ.
* @irq: irq to set priority (linux irq number).
* @p: priority (0 = highest, 3 = lowest).
*/
void au1300_set_irq_priority(unsigned int irq, int p)
{
irq -= ALCHEMY_GPIC_INT_BASE;
au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
}
EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
/*
* au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
* @dchan: dbdma trigger select (0, 1).
* @gpio: pin to assign as trigger.
*
* DBDMA controller has 2 external trigger sources; this function
* assigns a GPIO to the selected trigger.
*/
void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
{
unsigned long r;
if ((dchan >= 0) && (dchan <= 1)) {
r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
r &= ~(0xff << (8 * dchan));
r |= (gpio & 0x7f) << (8 * dchan);
__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
wmb();
}
}
/**********************************************************************/
static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
{
au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
allow ? GPIC_CFG_IDLEWAKE : 0);
}
static void au1300_gpic_mask(struct irq_data *d)
{
void __iomem *r = AU1300_GPIC_ADDR;
unsigned long bit, irq = d->irq;
irq -= ALCHEMY_GPIC_INT_BASE;
r += GPIC_GPIO_BANKOFF(irq);
bit = GPIC_GPIO_TO_BIT(irq);
__raw_writel(bit, r + AU1300_GPIC_IDIS);
wmb();
gpic_pin_set_idlewake(irq, 0);
}
static void au1300_gpic_unmask(struct irq_data *d)
{
void __iomem *r = AU1300_GPIC_ADDR;
unsigned long bit, irq = d->irq;
irq -= ALCHEMY_GPIC_INT_BASE;
gpic_pin_set_idlewake(irq, 1);
r += GPIC_GPIO_BANKOFF(irq);
bit = GPIC_GPIO_TO_BIT(irq);
__raw_writel(bit, r + AU1300_GPIC_IEN);
wmb();
}
static void au1300_gpic_maskack(struct irq_data *d)
{
void __iomem *r = AU1300_GPIC_ADDR;
unsigned long bit, irq = d->irq;
irq -= ALCHEMY_GPIC_INT_BASE;
r += GPIC_GPIO_BANKOFF(irq);
bit = GPIC_GPIO_TO_BIT(irq);
__raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */
__raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */
wmb();
gpic_pin_set_idlewake(irq, 0);
}
static void au1300_gpic_ack(struct irq_data *d)
{
void __iomem *r = AU1300_GPIC_ADDR;
unsigned long bit, irq = d->irq;
irq -= ALCHEMY_GPIC_INT_BASE;
r += GPIC_GPIO_BANKOFF(irq);
bit = GPIC_GPIO_TO_BIT(irq);
__raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */
wmb();
}
static struct irq_chip au1300_gpic = {
.name = "GPIOINT",
.irq_ack = au1300_gpic_ack,
.irq_mask = au1300_gpic_mask,
.irq_mask_ack = au1300_gpic_maskack,
.irq_unmask = au1300_gpic_unmask,
.irq_set_type = au1300_gpic_settype,
};
static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
{
unsigned long s;
unsigned char *name = NULL;
irq_flow_handler_t hdl = NULL;
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
s = GPIC_CFG_IC_LEVEL_HIGH;
name = "high";
hdl = handle_level_irq;
break;
case IRQ_TYPE_LEVEL_LOW:
s = GPIC_CFG_IC_LEVEL_LOW;
name = "low";
hdl = handle_level_irq;
break;
case IRQ_TYPE_EDGE_RISING:
s = GPIC_CFG_IC_EDGE_RISE;
name = "posedge";
hdl = handle_edge_irq;
break;
case IRQ_TYPE_EDGE_FALLING:
s = GPIC_CFG_IC_EDGE_FALL;
name = "negedge";
hdl = handle_edge_irq;
break;
case IRQ_TYPE_EDGE_BOTH:
s = GPIC_CFG_IC_EDGE_BOTH;
name = "bothedge";
hdl = handle_edge_irq;
break;
case IRQ_TYPE_NONE:
s = GPIC_CFG_IC_OFF;
name = "disabled";
hdl = handle_level_irq;
break;
default:
return -EINVAL;
}
__irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name);
au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
return 0;
}
/******************************************************************************/
static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
static int alchemy_gpic_suspend(void)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
int i;
/* save 4 interrupt mask status registers */
alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
/* save misc register(s) */
alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
/* molto silenzioso */
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
wmb();
/* save pin/int-type configuration */
base += AU1300_GPIC_PINCFG;
for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
wmb();
return 0;
}
static void alchemy_gpic_resume(void)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
int i;
/* disable all first */
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
wmb();
/* restore pin/int-type configurations */
base += AU1300_GPIC_PINCFG;
for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
wmb();
/* restore misc register(s) */
base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
wmb();
/* finally restore masks */
__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
wmb();
}
static struct syscore_ops alchemy_gpic_pmops = {
.suspend = alchemy_gpic_suspend,
.resume = alchemy_gpic_resume,
};
static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d)
{
int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
}
static void __init alchemy_gpic_init_irq(const struct gpic_devint_data *dints)
{
int i;
void __iomem *bank_base;
register_syscore_ops(&alchemy_gpic_pmops);
mips_cpu_irq_init();
/* disable & ack all possible interrupt sources */
for (i = 0; i < 4; i++) {
bank_base = AU1300_GPIC_ADDR + (i * 4);
__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
wmb();
__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
wmb();
}
/* register an irq_chip for them, with 2nd highest priority */
for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
au1300_set_irq_priority(i, 1);
au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
}
/* setup known on-chip sources */
while ((i = dints->irq) != -1) {
au1300_gpic_settype(irq_get_irq_data(i), dints->type);
au1300_set_irq_priority(i, dints->prio);
if (dints->internal)
au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
dints++;
}
irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
}
/**********************************************************************/
void __init arch_init_irq(void)
{
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1300:
alchemy_gpic_init_irq(&au1300_devints[0]);
break;
}
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
}
arch/mips/alchemy/common/irq.c
浏览文件 @ 3eab8095
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或