OMAP4: omap4panda: Enable audio support

PandaBoard has twl6040 codec for audio.
Register the omap4-abe-twl6040 platform device.
Add platform data to enable the twl6040 codec.
Since there is a difference in audio between  PandaBoard 4430
and PandaBoard ES (4460):
Use different name for the sound card:
"PandaBoard" for PandaBoard 4430
"PandaBoardES" for PandaBoard ES
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: David Anders <x0132446@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

arch/arm/mach-omap2/board-omap4panda.c

@@ -28,6 +28,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
+#include <linux/platform_data/omap-abe-twl6040.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/gic.h>
@@ -90,9 +91,34 @@ static struct platform_device leds_gpio = {
 	},
 };
 
+static struct omap_abe_twl6040_data panda_abe_audio_data = {
+	/* Audio out */
+	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* HandsFree through expasion connector */
+	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
+	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* PandaBoard: FM RX, PandaBoardES: audio in */
+	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* No jack detection. */
+	.jack_detection	= 0,
+	/* MCLK input is 38.4MHz */
+	.mclk_freq	= 38400000,
+
+};
+
+static struct platform_device panda_abe_audio = {
+	.name		= "omap-abe-twl6040",
+	.id		= -1,
+	.dev = {
+		.platform_data = &panda_abe_audio_data,
+	},
+};
+
 static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 	&wl1271_device,
+	&panda_abe_audio,
 };
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
@@ -251,8 +277,25 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
+static struct twl4030_codec_data twl6040_codec = {
+	/* single-step ramp for headset and handsfree */
+	.hs_left_step	= 0x0f,
+	.hs_right_step	= 0x0f,
+	.hf_left_step	= 0x1d,
+	.hf_right_step	= 0x1d,
+};
+
+static struct twl4030_audio_data twl6040_audio = {
+	.codec		= &twl6040_codec,
+	.audpwron_gpio	= 127,
+	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
+	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata;
+static struct twl4030_platform_data omap4_panda_twldata = {
+	.audio		= &twl6040_audio,
+};
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -475,6 +518,20 @@ void omap4_panda_display_init(void)
 		omap_hdmi_init(0);
 }
 
+static void omap4_panda_init_rev(void)
+{
+	if (cpu_is_omap4430()) {
+		/* PandaBoard 4430 */
+		/* ASoC audio configuration */
+		panda_abe_audio_data.card_name = "PandaBoard";
+		panda_abe_audio_data.has_hsmic = 1;
+	} else {
+		/* PandaBoard ES */
+		/* ASoC audio configuration */
+		panda_abe_audio_data.card_name = "PandaBoardES";
+	}
+}
+
 static void __init omap4_panda_init(void)
 {
 	int package = OMAP_PACKAGE_CBS;
@@ -486,6 +543,7 @@ static void __init omap4_panda_init(void)
 	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
 		pr_err("error setting wl12xx data\n");
 
+	omap4_panda_init_rev();
 	omap4_panda_i2c_init();
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	platform_device_register(&omap_vwlan_device);