Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 3909a071 编写于 作者: J Jonathan Cameron
浏览文件
操作

Revert "iio: imu: Add support for Kionix KMX61 sensor" 

The two halves of this part can run largely independently.  Hence
a version 4 of this patch followed that reorganized things completely.

This reverts commit d7d787d2.
上级 c78b9171
隐藏空白更改
内联 并排
Showing with 0 addition and 777 deletion
drivers/iio/imu/Kconfig
浏览文件 @ 3909a071
...@@ -25,15 +25,6 @@ config ADIS16480 ...@@ -25,15 +25,6 @@ config ADIS16480
Say yes here to build support for Analog Devices ADIS16375, ADIS16480, Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
ADIS16485, ADIS16488 inertial sensors. ADIS16485, ADIS16488 inertial sensors.
config KMX61
tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
depends on I2C
help
Say Y here if you want to build a driver for Kionix KMX61 6-axis accelerometer
and magnetometer.
To compile this driver as module, choose M here: the module will be called
kmx61.
source "drivers/iio/imu/inv_mpu6050/Kconfig" source "drivers/iio/imu/inv_mpu6050/Kconfig"
endmenu endmenu
......
drivers/iio/imu/Makefile
浏览文件 @ 3909a071
...@@ -14,5 +14,3 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o ...@@ -14,5 +14,3 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
obj-y += inv_mpu6050/ obj-y += inv_mpu6050/
obj-$(CONFIG_KMX61) += kmx61.o
drivers/iio/imu/kmx61.c 已删除 100644 → 0
浏览文件 @ c78b9171
/*
* KMX61 - Kionix 6-axis Accelerometer/Magnetometer
*
* Copyright (c) 2014, Intel Corporation.
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
* IIO driver for KMX61 (7-bit I2C slave address 0x0E or 0x0F).
*
* TODO: buffer, interrupt, thresholds, acpi, temperature sensor
*
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define KMX61_DRV_NAME "kmx61"
#define KMX61_REG_WHO_AM_I 0x00
/*
* three 16-bit accelerometer output registers for X/Y/Z axis
* we use only XOUT_L as a base register, all other addresses
* can be obtained by applying an offset and are provided here
* only for clarity.
*/
#define KMX61_ACC_XOUT_L 0x0A
#define KMX61_ACC_XOUT_H 0x0B
#define KMX61_ACC_YOUT_L 0x0C
#define KMX61_ACC_YOUT_H 0x0D
#define KMX61_ACC_ZOUT_L 0x0E
#define KMX61_ACC_ZOUT_H 0x0F
/*
* one 16-bit temperature output register
*/
#define KMX61_TEMP_L 0x10
#define KMX61_TEMP_H 0x11
/*
* three 16-bit magnetometer output registers for X/Y/Z axis
*/
#define KMX61_MAG_XOUT_L 0x12
#define KMX61_MAG_XOUT_H 0x13
#define KMX61_MAG_YOUT_L 0x14
#define KMX61_MAG_YOUT_H 0x15
#define KMX61_MAG_ZOUT_L 0x16
#define KMX61_MAG_ZOUT_H 0x17
#define KMX61_REG_ODCNTL 0x2C
#define KMX61_REG_STBY 0x29
#define KMX61_REG_CTRL1 0x2A
#define KMX61_ACC_STBY_BIT BIT(0)
#define KMX61_MAG_STBY_BIT BIT(1)
#define KMX61_ACT_STBY_BIT BIT(7)
#define KMX61_ALL_STBY (KMX61_ACC_STBY_BIT | KMX61_MAG_STBY_BIT)
#define KMX61_REG_CTRL1_GSEL0_SHIFT 0
#define KMX61_REG_CTRL1_GSEL1_SHIFT 1
#define KMX61_REG_CTRL1_GSEL0_MASK 0x01
#define KMX61_REG_CTRL1_GSEL1_MASK 0x02
#define KMX61_REG_CTRL1_BIT_RES BIT(4)
#define KMX61_ACC_ODR_SHIFT 0
#define KMX61_MAG_ODR_SHIFT 4
#define KMX61_ACC_ODR_MASK 0x0F
#define KMX61_MAG_ODR_MASK 0xF0
#define KMX61_SLEEP_DELAY_MS 2000
#define KMX61_CHIP_ID 0x12
struct kmx61_data {
struct i2c_client *client;
/* serialize access to non-atomic ops, e.g set_mode */
struct mutex lock;
u8 range;
u8 odr_bits;
/* standby state */
u8 acc_stby;
u8 mag_stby;
/* power state */
bool acc_ps;
bool mag_ps;
};
enum kmx61_range {
KMX61_RANGE_2G,
KMX61_RANGE_4G,
KMX61_RANGE_8G,
};
enum kmx61_scan {
KMX61_SCAN_ACC_X,
KMX61_SCAN_ACC_Y,
KMX61_SCAN_ACC_Z,
KMX61_SCAN_TEMP,
KMX61_SCAN_MAG_X,
KMX61_SCAN_MAG_Y,
KMX61_SCAN_MAG_Z,
};
static const struct {
u16 uscale;
u8 gsel0;
u8 gsel1;
} kmx61_scale_table[] = {
{9582, 0, 0},
{19163, 1, 0},
{38326, 0, 1},
};
/* KMX61 devices */
#define KMX61_ACC 0x01
#define KMX61_MAG 0x02
static const struct {
int val;
int val2;
u8 odr_bits;
} kmx61_samp_freq_table[] = { {12, 500000, 0x00},
{25, 0, 0x01},
{50, 0, 0x02},
{100, 0, 0x03},
{200, 0, 0x04},
{400, 0, 0x05},
{800, 0, 0x06},
{1600, 0, 0x07},
{0, 781000, 0x08},
{1, 563000, 0x09},
{3, 125000, 0x0A},
{6, 250000, 0x0B} };
static IIO_CONST_ATTR(accel_scale_available, "0.009582 0.019163 0.038326");
static IIO_CONST_ATTR(magn_scale_available, "0.001465");
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800");
static struct attribute *kmx61_attributes[] = {
&iio_const_attr_accel_scale_available.dev_attr.attr,
&iio_const_attr_magn_scale_available.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
NULL,
};
static const struct attribute_group kmx61_attribute_group = {
.attrs = kmx61_attributes,
};
#define KMX61_ACC_CHAN(_axis, _index) { \
.type = IIO_ACCEL, \
.modified = 1, \
.channel2 = IIO_MOD_ ## _axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.address = KMX61_ACC, \
.scan_index = _index, \
.scan_type = { \
.sign = 's', \
.realbits = 12, \
.storagebits = 16, \
.shift = 4, \
.endianness = IIO_LE, \
}, \
}
#define KMX61_MAG_CHAN(_axis, _index) { \
.type = IIO_MAGN, \
.modified = 1, \
.channel2 = IIO_MOD_ ## _axis, \
.address = KMX61_MAG, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = _index, \
.scan_type = { \
.sign = 's', \
.realbits = 14, \
.storagebits = 16, \
.shift = 2, \
.endianness = IIO_LE, \
}, \
}
static const struct iio_chan_spec kmx61_channels[] = {
KMX61_ACC_CHAN(X, KMX61_SCAN_ACC_X),
KMX61_ACC_CHAN(Y, KMX61_SCAN_ACC_Y),
KMX61_ACC_CHAN(Z, KMX61_SCAN_ACC_Z),
KMX61_MAG_CHAN(X, KMX61_SCAN_MAG_X),
KMX61_MAG_CHAN(Y, KMX61_SCAN_MAG_Y),
KMX61_MAG_CHAN(Z, KMX61_SCAN_MAG_Z),
};
static int kmx61_convert_freq_to_bit(int val, int val2)
{
int i;
for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
if (val == kmx61_samp_freq_table[i].val &&
val2 == kmx61_samp_freq_table[i].val2)
return kmx61_samp_freq_table[i].odr_bits;
return -EINVAL;
}
/**
* kmx61_set_mode() - set KMX61 device operating mode
* @data - kmx61 device private data pointer
* @mode - bitmask, indicating operating mode for @device
* @device - bitmask, indicating device for which @mode needs to be set
* @update - update stby bits stored in device's private @data
*
* For each sensor (accelerometer/magnetometer) there are two operating modes
* STANDBY and OPERATION. Neither accel nor magn can be disabled independently
* if they are both enabled. Internal sensors state is saved in acc_stby and
* mag_stby members of driver's private @data.
*/
static int kmx61_set_mode(struct kmx61_data *data, u8 mode, u8 device,
bool update)
{
int ret;
int acc_stby = -1, mag_stby = -1;
ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_stby\n");
return ret;
}
if (device & KMX61_ACC) {
if (mode & KMX61_ACC_STBY_BIT) {
ret |= KMX61_ACC_STBY_BIT;
acc_stby = 1;
} else {
ret &= ~KMX61_ACC_STBY_BIT;
acc_stby = 0;
}
}
if (device & KMX61_MAG) {
if (mode & KMX61_MAG_STBY_BIT) {
ret |= KMX61_MAG_STBY_BIT;
mag_stby = 1;
} else {
ret &= ~KMX61_MAG_STBY_BIT;
mag_stby = 0;
}
}
ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_STBY, ret);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_stby\n");
return ret;
}
if (acc_stby != -1 && update)
data->acc_stby = !!acc_stby;
if (mag_stby != -1 && update)
data->mag_stby = !!mag_stby;
return ret;
}
static int kmx61_get_mode(struct kmx61_data *data, u8 *mode, u8 device)
{
int ret;
ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_stby\n");
return ret;
}
*mode = 0;
if (device & KMX61_ACC) {
if (ret & KMX61_ACC_STBY_BIT)
*mode |= KMX61_ACC_STBY_BIT;
else
*mode &= ~KMX61_ACC_STBY_BIT;
}
if (device & KMX61_MAG) {
if (ret & KMX61_MAG_STBY_BIT)
*mode |= KMX61_MAG_STBY_BIT;
else
*mode &= ~KMX61_MAG_STBY_BIT;
}
return 0;
}
static int kmx61_set_odr(struct kmx61_data *data, int val, int val2, u8 device)
{
int ret;
u8 mode;
int lodr_bits, odr_bits;
ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
if (ret < 0)
return ret;
lodr_bits = kmx61_convert_freq_to_bit(val, val2);
if (lodr_bits < 0)
return lodr_bits;
/* To change ODR, accel and magn must be in STDBY */
ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG,
true);
if (ret < 0)
return ret;
odr_bits = 0;
if (device & KMX61_ACC)
odr_bits |= lodr_bits;
if (device & KMX61_MAG)
odr_bits |= (lodr_bits << KMX61_MAG_ODR_SHIFT);
ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_ODCNTL,
odr_bits);
if (ret < 0)
return ret;
ret = kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
if (ret < 0)
return ret;
data->odr_bits = lodr_bits;
return 0;
}
static
int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2, u8 device)
{ int i;
u8 lodr_bits;
if (device & KMX61_ACC)
lodr_bits = (data->odr_bits >> KMX61_ACC_ODR_SHIFT) &
KMX61_ACC_ODR_MASK;
else if (device & KMX61_MAG)
lodr_bits = (data->odr_bits >> KMX61_MAG_ODR_SHIFT) &
KMX61_MAG_ODR_MASK;
else
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
if (lodr_bits == kmx61_samp_freq_table[i].odr_bits) {
*val = kmx61_samp_freq_table[i].val;
*val2 = kmx61_samp_freq_table[i].val2;
return 0;
}
return -EINVAL;
}
static int kmx61_set_range(struct kmx61_data *data, int range)
{
int ret;
ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
return ret;
}
ret &= ~(KMX61_REG_CTRL1_GSEL0_MASK | KMX61_REG_CTRL1_GSEL1_MASK);
ret |= kmx61_scale_table[range].gsel0 << KMX61_REG_CTRL1_GSEL0_SHIFT;
ret |= kmx61_scale_table[range].gsel1 << KMX61_REG_CTRL1_GSEL1_SHIFT;
ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
return ret;
}
data->range = range;
return 0;
}
static int kmx61_set_scale(struct kmx61_data *data, int uscale)
{
int ret, i;
u8 mode;
for (i = 0; i < ARRAY_SIZE(kmx61_scale_table); i++) {
if (kmx61_scale_table[i].uscale == uscale) {
ret = kmx61_get_mode(data, &mode,
KMX61_ACC | KMX61_MAG);
if (ret < 0)
return ret;
ret = kmx61_set_mode(data, KMX61_ALL_STBY,
KMX61_ACC | KMX61_MAG, true);
if (ret < 0)
return ret;
ret = kmx61_set_range(data, i);
if (ret < 0)
return ret;
return kmx61_set_mode(data, mode,
KMX61_ACC | KMX61_MAG, true);
}
}
return -EINVAL;
}
static int kmx61_chip_init(struct kmx61_data *data)
{
int ret;
ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_WHO_AM_I);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading who_am_i\n");
return ret;
}
if (ret != KMX61_CHIP_ID) {
dev_err(&data->client->dev,
"Wrong chip id, got %x expected %x\n",
ret, KMX61_CHIP_ID);
return -EINVAL;
}
/* set accel 12bit, 4g range */
ret = kmx61_set_range(data, KMX61_RANGE_4G);
if (ret < 0)
return ret;
/* set acc/magn to OPERATION mode */
ret = kmx61_set_mode(data, 0, KMX61_ACC | KMX61_MAG, true);
if (ret < 0)
return ret;
return 0;
}
/**
* kmx61_set_power_state() - set power state for kmx61 @device
* @data - kmx61 device private pointer
* @on - power state to be set for @device
* @device - bitmask indicating device for which @on state needs to be set
*
* Notice that when ACC power state needs to be set to ON and MAG is in
* OPERATION then we know that kmx61_runtime_resume was already called
* so we must set ACC OPERATION mode here. The same happens when MAG power
* state needs to be set to ON and ACC is in OPERATION.
*/
static int kmx61_set_power_state(struct kmx61_data *data, bool on, u8 device)
{
#ifdef CONFIG_PM_RUNTIME
int ret;
if (device & KMX61_ACC) {
if (on && !data->acc_ps && !data->mag_stby)
kmx61_set_mode(data, 0, KMX61_ACC, true);
data->acc_ps = on;
}
if (device & KMX61_MAG) {
if (on && !data->mag_ps && !data->acc_stby)
kmx61_set_mode(data, 0, KMX61_MAG, true);
data->mag_ps = on;
}
if (on) {
ret = pm_runtime_get_sync(&data->client->dev);
} else {
pm_runtime_mark_last_busy(&data->client->dev);
ret = pm_runtime_put_autosuspend(&data->client->dev);
}
if (ret < 0) {
dev_err(&data->client->dev,
"Failed: kmx61_set_power_state for %d, ret %d\n",
on, ret);
return ret;
}
#endif
return 0;
}
static int kmx61_read_measurement(struct kmx61_data *data, int base, int offset)
{
int ret;
u8 reg = base + offset * 2;
ret = i2c_smbus_read_word_data(data->client, reg);
if (ret < 0) {
dev_err(&data->client->dev, "failed to read reg at %x\n", reg);
return ret;
}
return ret;
}
static int kmx61_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
struct kmx61_data *data = iio_priv(indio_dev);
int ret;
u8 base_reg;
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_ACCEL:
case IIO_MAGN:
base_reg = KMX61_ACC_XOUT_L;
break;
default:
return -EINVAL;
}
mutex_lock(&data->lock);
kmx61_set_power_state(data, true, chan->address);
ret = kmx61_read_measurement(data, base_reg, chan->scan_index);
if (ret < 0) {
kmx61_set_power_state(data, false, chan->address);
mutex_unlock(&data->lock);
return ret;
}
*val = sign_extend32(ret >> chan->scan_type.shift,
chan->scan_type.realbits - 1);
kmx61_set_power_state(data, false, chan->address);
mutex_unlock(&data->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ACCEL:
*val = 0;
*val2 = kmx61_scale_table[data->range].uscale;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_MAGN:
/* 14 bits res, 1465 microGauss per magn count */
*val = 0;
*val2 = 1465;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_SAMP_FREQ:
if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN)
return -EINVAL;
mutex_lock(&data->lock);
ret = kmx61_get_odr(data, val, val2, chan->address);
mutex_unlock(&data->lock);
if (ret)
return -EINVAL;
return IIO_VAL_INT_PLUS_MICRO;
}
return -EINVAL;
}
static int kmx61_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val,
int val2, long mask)
{
struct kmx61_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN)
return -EINVAL;
mutex_lock(&data->lock);
ret = kmx61_set_odr(data, val, val2, chan->address);
mutex_unlock(&data->lock);
return ret;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ACCEL:
if (val != 0)
return -EINVAL;
mutex_lock(&data->lock);
ret = kmx61_set_scale(data, val2);
mutex_unlock(&data->lock);
return ret;
default:
return -EINVAL;
}
return ret;
default:
return -EINVAL;
}
return ret;
}
static const struct iio_info kmx61_info = {
.driver_module = THIS_MODULE,
.read_raw = kmx61_read_raw,
.write_raw = kmx61_write_raw,
.attrs = &kmx61_attribute_group,
};
static int kmx61_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct kmx61_data *data;
struct iio_dev *indio_dev;
int ret;
const char *name = NULL;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
if (id)
name = id->name;
indio_dev->dev.parent = &client->dev;
indio_dev->channels = kmx61_channels;
indio_dev->num_channels = ARRAY_SIZE(kmx61_channels);
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &kmx61_info;
mutex_init(&data->lock);
ret = kmx61_chip_init(data);
if (ret < 0)
return ret;
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "Failed to register iio device\n");
goto err_iio_device_register;
}
ret = pm_runtime_set_active(&client->dev);
if (ret < 0)
goto err_pm_runtime_set_active;
pm_runtime_enable(&client->dev);
pm_runtime_set_autosuspend_delay(&client->dev, KMX61_SLEEP_DELAY_MS);
pm_runtime_use_autosuspend(&client->dev);
return 0;
err_pm_runtime_set_active:
iio_device_unregister(indio_dev);
err_iio_device_register:
kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
return ret;
}
static int kmx61_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct kmx61_data *data = iio_priv(indio_dev);
int ret;
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);
iio_device_unregister(indio_dev);
mutex_lock(&data->lock);
ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
mutex_unlock(&data->lock);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int kmx61_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct kmx61_data *data = iio_priv(indio_dev);
int ret;
mutex_lock(&data->lock);
ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG,
false);
mutex_unlock(&data->lock);
return ret;
}
static int kmx61_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct kmx61_data *data = iio_priv(indio_dev);
u8 stby = 0;
if (data->acc_stby)
stby |= KMX61_ACC_STBY_BIT;
if (data->mag_stby)
stby |= KMX61_MAG_STBY_BIT;
return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true);
}
#endif
#ifdef CONFIG_PM_RUNTIME
static int kmx61_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct kmx61_data *data = iio_priv(indio_dev);
int ret;
mutex_lock(&data->lock);
ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
mutex_unlock(&data->lock);
return ret;
}
static int kmx61_runtime_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct kmx61_data *data = iio_priv(indio_dev);
u8 stby = 0;
if (!data->acc_ps)
stby |= KMX61_ACC_STBY_BIT;
if (!data->mag_ps)
stby |= KMX61_MAG_STBY_BIT;
return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true);
}
#endif
static const struct dev_pm_ops kmx61_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(kmx61_suspend, kmx61_resume)
SET_RUNTIME_PM_OPS(kmx61_runtime_suspend, kmx61_runtime_resume, NULL)
};
static const struct i2c_device_id kmx61_id[] = {
{"kmx611021", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, kmx61_id);
static struct i2c_driver kmx61_driver = {
.driver = {
.name = KMX61_DRV_NAME,
.pm = &kmx61_pm_ops,
},
.probe = kmx61_probe,
.remove = kmx61_remove,
.id_table = kmx61_id,
};
module_i2c_driver(kmx61_driver);
MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
MODULE_DESCRIPTION("KMX61 accelerometer/magnetometer driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或