Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main addition this time around is the new ARM "SCMI" framework,
  which is the latest in a series of standards coming from ARM to do
  power management in a platform independent way.

  This has been through many review cycles, and it relies on a rather
  interesting way of using the mailbox subsystem, but in the end I
  agreed that Sudeep's version was the best we could do after all.

  Other changes include:

   - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
     which makes more sense. Similarly, the performance monitoring
     portion of the CCI driver are moved the same way and cleaned up a
     little more.

   - a series of updates to the SCPI framework

   - support for the Mediatek mt7623a SoC in drivers/soc

   - support for additional NVIDIA Tegra hardware in drivers/soc

   - a new reset driver for Socionext Uniphier

   - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
     drivers/firmware and drivers/reset across platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  reset: uniphier: add ethernet reset control support for PXs3
  reset: stm32mp1: Enable stm32mp1 reset driver
  dt-bindings: reset: add STM32MP1 resets
  reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
  reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
  clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
  firmware: arm_scmi: prevent accessing rate_discrete uninitialized
  hwmon: (scmi) return -EINVAL when sensor information is unavailable
  amlogic: meson-gx-socinfo: Update soc ids
  soc/tegra: pmc: Use the new reset APIs to manage reset controllers
  soc: mediatek: update power domain data of MT2712
  dt-bindings: soc: update MT2712 power dt-bindings
  cpufreq: scmi: add thermal dependency
  soc: mediatek: fix the mistaken pointer accessed when subdomains are added
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
  soc: mediatek: avoid hardcoded value with bus_prot_mask
  dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
  dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
  ...

Documentation/devicetree/bindings/arm/arm,scmi.txt

+System Control and Management Interface (SCMI) Message Protocol
+----------------------------------------------------------
+
+The SCMI is intended to allow agents such as OSPM to manage various functions
+that are provided by the hardware platform it is running on, including power
+and performance functions.
+
+This binding is intended to define the interface the firmware implementing
+the SCMI as described in ARM document number ARM DUI 0922B ("ARM System Control
+and Management Interface Platform Design Document")[0] provide for OSPM in
+the device tree.
+
+Required properties:
+
+The scmi node with the following properties shall be under the /firmware/ node.
+
+- compatible : shall be "arm,scmi"
+- mboxes: List of phandle and mailbox channel specifiers. It should contain
+	  exactly one or two mailboxes, one for transmitting messages("tx")
+	  and another optional for receiving the notifications("rx") if
+	  supported.
+- shmem : List of phandle pointing to the shared memory(SHM) area as per
+	  generic mailbox client binding.
+- #address-cells : should be '1' if the device has sub-nodes, maps to
+	  protocol identifier for a given sub-node.
+- #size-cells : should be '0' as 'reg' property doesn't have any size
+	  associated with it.
+
+Optional properties:
+
+- mbox-names: shall be "tx" or "rx" depending on mboxes entries.
+
+See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
+about the generic mailbox controller and client driver bindings.
+
+The mailbox is the only permitted method of calling the SCMI firmware.
+Mailbox doorbell is used as a mechanism to alert the presence of a
+messages and/or notification.
+
+Each protocol supported shall have a sub-node with corresponding compatible
+as described in the following sections. If the platform supports dedicated
+communication channel for a particular protocol, the 3 properties namely:
+mboxes, mbox-names and shmem shall be present in the sub-node corresponding
+to that protocol.
+
+Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Required properties:
+- #clock-cells : Should be 1. Contains the Clock ID value used by SCMI commands.
+
+Power domain bindings for the power domains based on SCMI Message Protocol
+------------------------------------------------------------
+
+This binding for the SCMI power domain providers uses the generic power
+domain binding[2].
+
+Required properties:
+ - #power-domain-cells : Should be 1. Contains the device or the power
+			 domain ID value used by SCMI commands.
+
+Sensor bindings for the sensors based on SCMI Message Protocol
+--------------------------------------------------------------
+SCMI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- #thermal-sensor-cells: should be set to 1. This property follows the
+			 thermal device tree bindings[3].
+
+			 Valid cell values are raw identifiers (Sensor ID)
+			 as used by the firmware. Refer to  platform details
+			 for your implementation for the IDs to use.
+
+SRAM and Shared Memory for SCMI
+-------------------------------
+
+A small area of SRAM is reserved for SCMI communication between application
+processors and SCP.
+
+The properties should follow the generic mmio-sram description found in [4]
+
+Each sub-node represents the reserved area for SCMI.
+
+Required sub-node properties:
+- reg : The base offset and size of the reserved area with the SRAM
+- compatible : should be "arm,scmi-shmem" for Non-secure SRAM based
+	       shared memory
+
+[0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/thermal/thermal.txt
+[4] Documentation/devicetree/bindings/sram/sram.txt
+
+Example:
+
+sram@50000000 {
+	compatible = "mmio-sram";
+	reg = <0x0 0x50000000 0x0 0x10000>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x0 0x50000000 0x10000>;
+
+	cpu_scp_lpri: scp-shmem@0 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x0 0x200>;
+	};
+
+	cpu_scp_hpri: scp-shmem@200 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x200 0x200>;
+	};
+};
+
+mailbox@40000000 {
+	....
+	#mbox-cells = <1>;
+	reg = <0x0 0x40000000 0x0 0x10000>;
+};
+
+firmware {
+
+	...
+
+	scmi {
+		compatible = "arm,scmi";
+		mboxes = <&mailbox 0 &mailbox 1>;
+		mbox-names = "tx", "rx";
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		scmi_devpd: protocol@11 {
+			reg = <0x11>;
+			#power-domain-cells = <1>;
+		};
+
+		scmi_dvfs: protocol@13 {
+			reg = <0x13>;
+			#clock-cells = <1>;
+		};
+
+		scmi_clk: protocol@14 {
+			reg = <0x14>;
+			#clock-cells = <1>;
+		};
+
+		scmi_sensors0: protocol@15 {
+			reg = <0x15>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+};
+
+cpu@0 {
+	...
+	reg = <0 0>;
+	clocks = <&scmi_dvfs 0>;
+};
+
+hdlcd@7ff60000 {
+	...
+	reg = <0 0x7ff60000 0 0x1000>;
+	clocks = <&scmi_clk 4>;
+	power-domains = <&scmi_devpd 1>;
+};
+
+thermal-zones {
+	soc_thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <1000>;
+					/* sensor ID */
+		thermal-sensors = <&scmi_sensors0 3>;
+		...
+	};
+};

Documentation/devicetree/bindings/arm/samsung/pmu.txt

@@ -43,6 +43,12 @@ following properties:
 - interrupt-parent: a phandle indicating which interrupt controller
   this PMU signals interrupts to.
 
+
+Optional nodes:
+
+- nodes defining the restart and poweroff syscon children
+
+
 Example :
 pmu_system_controller: system-controller@10040000 {
 	compatible = "samsung,exynos5250-pmu", "syscon";

Documentation/devicetree/bindings/mailbox/mailbox.txt

@@ -23,6 +23,11 @@ Required property:
 
 Optional property:
 - mbox-names: List of identifier strings for each mailbox channel.
+- shmem : List of phandle pointing to the shared memory(SHM) area between the
+	  users of these mailboxes for IPC, one for each mailbox. This shared
+	  memory can be part of any memory reserved for the purpose of this
+	  communication between the mailbox client and the remote.
+
 
 Example:
 	pwr_cntrl: power {
@@ -30,3 +35,26 @@ Example:
 		mbox-names = "pwr-ctrl", "rpc";
 		mboxes = <&mailbox 0 &mailbox 1>;
 	};
+
+Example with shared memory(shmem):
+
+	sram: sram@50000000 {
+		compatible = "mmio-sram";
+		reg = <0x50000000 0x10000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x50000000 0x10000>;
+
+		cl_shmem: shmem@0 {
+			compatible = "client-shmem";
+			reg = <0x0 0x200>;
+		};
+	};
+
+	client@2e000000 {
+		...
+		mboxes = <&mailbox 0>;
+		shmem = <&cl_shmem>;
+		..
+	};

Documentation/devicetree/bindings/mfd/aspeed-lpc.txt

@@ -176,3 +176,24 @@ lhc: lhc@20 {
 	compatible = "aspeed,ast2500-lhc";
 	reg = <0x20 0x24 0x48 0x8>;
 };
+
+LPC reset control
+-----------------
+
+The UARTs present in the ASPEED SoC can have their resets tied to the reset
+state of the LPC bus. Some systems may chose to modify this configuration.
+
+Required properties:
+
+ - compatible:		"aspeed,ast2500-lpc-reset" or
+			"aspeed,ast2400-lpc-reset"
+ - reg:			offset and length of the IP in the LHC memory region
+ - #reset-controller	indicates the number of reset cells expected
+
+Example:
+
+lpc_reset: reset-controller@18 {
+        compatible = "aspeed,ast2500-lpc-reset";
+        reg = <0x18 0x4>;
+        #reset-cells = <1>;
+};

Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt

+STMicroelectronics STM32MP1 Peripheral Reset Controller
+=======================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt

Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

@@ -21,6 +21,8 @@ Required properties:
 	- "mediatek,mt2712-scpsys"
 	- "mediatek,mt6797-scpsys"
 	- "mediatek,mt7622-scpsys"
+	- "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
+	- "mediatek,mt7623a-scpsys": For MT7623A SoC
 	- "mediatek,mt8173-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
@@ -28,10 +30,11 @@ Required properties:
 - clock, clock-names: clocks according to the common clock binding.
                       These are clocks which hardware needs to be
                       enabled before enabling certain power domains.
-	Required clocks for MT2701: "mm", "mfg", "ethif"
+	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
 	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
 	Required clocks for MT6797: "mm", "mfg", "vdec"
 	Required clocks for MT7622: "hif_sel"
+	Required clocks for MT7622A: "ethif"
 	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
 
 Optional properties:

MAINTAINERS

@@ -13491,15 +13491,16 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 S:	Supported
 F:	drivers/mfd/syscon.c
 
-SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
+SYSTEM CONTROL & POWER/MANAGEMENT INTERFACE (SCPI/SCMI) Message Protocol drivers
 M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/arm/arm,scpi.txt
-F:	drivers/clk/clk-scpi.c
-F:	drivers/cpufreq/scpi-cpufreq.c
+F:	Documentation/devicetree/bindings/arm/arm,sc[mp]i.txt
+F:	drivers/clk/clk-sc[mp]i.c
+F:	drivers/cpufreq/sc[mp]i-cpufreq.c
 F:	drivers/firmware/arm_scpi.c
-F:	include/linux/scpi_protocol.h
+F:	drivers/firmware/arm_scmi/
+F:	include/linux/sc[mp]i_protocol.h
 
 SYSTEM RESET/SHUTDOWN DRIVERS
 M:	Sebastian Reichel <sre@kernel.org>

drivers/bus/Kconfig

@@ -8,25 +8,10 @@ menu "Bus devices"
 config ARM_CCI
 	bool
 
-config ARM_CCI_PMU
-	bool
-	select ARM_CCI
-
 config ARM_CCI400_COMMON
 	bool
 	select ARM_CCI
 
-config ARM_CCI400_PMU
-	bool "ARM CCI400 PMU support"
-	depends on (ARM && CPU_V7) || ARM64
-	depends on PERF_EVENTS
-	select ARM_CCI400_COMMON
-	select ARM_CCI_PMU
-	help
-	  Support for PMU events monitoring on the ARM CCI-400 (cache coherent
-	  interconnect). CCI-400 supports counting events related to the
-	  connected slave/master interfaces.
-
 config ARM_CCI400_PORT_CTRL
 	bool
 	depends on ARM && OF && CPU_V7
@@ -35,27 +20,6 @@ config ARM_CCI400_PORT_CTRL
 	  Low level power management driver for CCI400 cache coherent
 	  interconnect for ARM platforms.
 
-config ARM_CCI5xx_PMU
-	bool "ARM CCI-500/CCI-550 PMU support"
-	depends on (ARM && CPU_V7) || ARM64
-	depends on PERF_EVENTS
-	select ARM_CCI_PMU
-	help
-	  Support for PMU events monitoring on the ARM CCI-500/CCI-550 cache
-	  coherent interconnects. Both of them provide 8 independent event counters,
-	  which can count events pertaining to the slave/master interfaces as well
-	  as the internal events to the CCI.
-
-	  If unsure, say Y
-
-config ARM_CCN
-	tristate "ARM CCN driver support"
-	depends on ARM || ARM64
-	depends on PERF_EVENTS
-	help
-	  PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
-	  interconnect.
-
 config BRCMSTB_GISB_ARB
 	bool "Broadcom STB GISB bus arbiter"
 	depends on ARM || ARM64 || MIPS

drivers/bus/Makefile

@@ -5,8 +5,6 @@
 
 # Interconnect bus drivers for ARM platforms
 obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
-obj-$(CONFIG_ARM_CCN)		+= arm-ccn.o
-
 obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmstb_gisb.o
 
 # DPAA2 fsl-mc bus

drivers/clk/Kconfig

@@ -62,6 +62,16 @@ config COMMON_CLK_HI655X
 	  multi-function device has one fixed-rate oscillator, clocked
 	  at 32KHz.
 
+config COMMON_CLK_SCMI
+	tristate "Clock driver controlled via SCMI interface"
+	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
+	  ---help---
+	  This driver provides support for clocks that are controlled
+	  by firmware that implements the SCMI interface.
+
+	  This driver uses SCMI Message Protocol to interact with the
+	  firmware providing all the clock controls.
+
 config COMMON_CLK_SCPI
 	tristate "Clock driver controlled via SCPI interface"
 	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST

drivers/clk/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
 obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_HI655X)		+= clk-hi655x.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
+obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o
 obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
 obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o

drivers/clk/clk-scmi.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Power Interface (SCMI) Protocol based clock driver
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/scmi_protocol.h>
+#include <asm/div64.h>
+
+struct scmi_clk {
+	u32 id;
+	struct clk_hw hw;
+	const struct scmi_clock_info *info;
+	const struct scmi_handle *handle;
+};
+
+#define to_scmi_clk(clk) container_of(clk, struct scmi_clk, hw)
+
+static unsigned long scmi_clk_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	int ret;
+	u64 rate;
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	ret = clk->handle->clk_ops->rate_get(clk->handle, clk->id, &rate);
+	if (ret)
+		return 0;
+	return rate;
+}
+
+static long scmi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate)
+{
+	int step;
+	u64 fmin, fmax, ftmp;
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	/*
+	 * We can't figure out what rate it will be, so just return the
+	 * rate back to the caller. scmi_clk_recalc_rate() will be called
+	 * after the rate is set and we'll know what rate the clock is
+	 * running at then.
+	 */
+	if (clk->info->rate_discrete)
+		return rate;
+
+	fmin = clk->info->range.min_rate;
+	fmax = clk->info->range.max_rate;
+	if (rate <= fmin)
+		return fmin;
+	else if (rate >= fmax)
+		return fmax;
+
+	ftmp = rate - fmin;
+	ftmp += clk->info->range.step_size - 1; /* to round up */
+	step = do_div(ftmp, clk->info->range.step_size);
+
+	return step * clk->info->range.step_size + fmin;
+}
+
+static int scmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	return clk->handle->clk_ops->rate_set(clk->handle, clk->id, 0, rate);
+}
+
+static int scmi_clk_enable(struct clk_hw *hw)
+{
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	return clk->handle->clk_ops->enable(clk->handle, clk->id);
+}
+
+static void scmi_clk_disable(struct clk_hw *hw)
+{
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	clk->handle->clk_ops->disable(clk->handle, clk->id);
+}
+
+static const struct clk_ops scmi_clk_ops = {
+	.recalc_rate = scmi_clk_recalc_rate,
+	.round_rate = scmi_clk_round_rate,
+	.set_rate = scmi_clk_set_rate,
+	/*
+	 * We can't provide enable/disable callback as we can't perform the same
+	 * in atomic context. Since the clock framework provides standard API
+	 * clk_prepare_enable that helps cases using clk_enable in non-atomic
+	 * context, it should be fine providing prepare/unprepare.
+	 */
+	.prepare = scmi_clk_enable,
+	.unprepare = scmi_clk_disable,
+};
+
+static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk)
+{
+	int ret;
+	struct clk_init_data init = {
+		.flags = CLK_GET_RATE_NOCACHE,
+		.num_parents = 0,
+		.ops = &scmi_clk_ops,
+		.name = sclk->info->name,
+	};
+
+	sclk->hw.init = &init;
+	ret = devm_clk_hw_register(dev, &sclk->hw);
+	if (!ret)
+		clk_hw_set_rate_range(&sclk->hw, sclk->info->range.min_rate,
+				      sclk->info->range.max_rate);
+	return ret;
+}
+
+static int scmi_clocks_probe(struct scmi_device *sdev)
+{
+	int idx, count, err;
+	struct clk_hw **hws;
+	struct clk_hw_onecell_data *clk_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct scmi_handle *handle = sdev->handle;
+
+	if (!handle || !handle->clk_ops)
+		return -ENODEV;
+
+	count = handle->clk_ops->count_get(handle);
+	if (count < 0) {
+		dev_err(dev, "%s: invalid clock output count\n", np->name);
+		return -EINVAL;
+	}
+
+	clk_data = devm_kzalloc(dev, sizeof(*clk_data) +
+				sizeof(*clk_data->hws) * count, GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = count;
+	hws = clk_data->hws;
+
+	for (idx = 0; idx < count; idx++) {
+		struct scmi_clk *sclk;
+
+		sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL);
+		if (!sclk)
+			return -ENOMEM;
+
+		sclk->info = handle->clk_ops->info_get(handle, idx);
+		if (!sclk->info) {
+			dev_dbg(dev, "invalid clock info for idx %d\n", idx);
+			continue;
+		}
+
+		sclk->id = idx;
+		sclk->handle = handle;
+
+		err = scmi_clk_ops_init(dev, sclk);
+		if (err) {
+			dev_err(dev, "failed to register clock %d\n", idx);
+			devm_kfree(dev, sclk);
+			hws[idx] = NULL;
+		} else {
+			dev_dbg(dev, "Registered clock:%s\n", sclk->info->name);
+			hws[idx] = &sclk->hw;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   clk_data);
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+	{ SCMI_PROTOCOL_CLOCK },
+	{ },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_clocks_driver = {
+	.name = "scmi-clocks",
+	.probe = scmi_clocks_probe,
+	.id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_clocks_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI clock driver");
+MODULE_LICENSE("GPL v2");

drivers/cpufreq/Kconfig.arm

@@ -239,6 +239,18 @@ config ARM_SA1100_CPUFREQ
 config ARM_SA1110_CPUFREQ
 	bool
 
+config ARM_SCMI_CPUFREQ
+	tristate "SCMI based CPUfreq driver"
+	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
+	depends on !CPU_THERMAL || THERMAL
+	select PM_OPP
+	help
+	  This adds the CPUfreq driver support for ARM platforms using SCMI
+	  protocol for CPU power management.
+
+	  This driver uses SCMI Message Protocol driver to interact with the
+	  firmware providing the CPU DVFS functionality.
+
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR

drivers/cpufreq/Makefile

@@ -75,6 +75,7 @@ obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
 obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
+obj-$(CONFIG_ARM_SCMI_CPUFREQ)		+= scmi-cpufreq.o
 obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o

drivers/cpufreq/scmi-cpufreq.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Power Interface (SCMI) based CPUFreq Interface driver
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/scmi_protocol.h>
+#include <linux/types.h>
+
+struct scmi_data {
+	int domain_id;
+	struct device *cpu_dev;
+	struct thermal_cooling_device *cdev;
+};
+
+static const struct scmi_handle *handle;
+
+static unsigned int scmi_cpufreq_get_rate(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
+	struct scmi_perf_ops *perf_ops = handle->perf_ops;
+	struct scmi_data *priv = policy->driver_data;
+	unsigned long rate;
+	int ret;
+
+	ret = perf_ops->freq_get(handle, priv->domain_id, &rate, false);
+	if (ret)
+		return 0;
+	return rate / 1000;
+}
+
+/*
+ * perf_ops->freq_set is not a synchronous, the actual OPP change will
+ * happen asynchronously and can get notified if the events are
+ * subscribed for by the SCMI firmware
+ */
+static int
+scmi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	int ret;
+	struct scmi_data *priv = policy->driver_data;
+	struct scmi_perf_ops *perf_ops = handle->perf_ops;
+	u64 freq = policy->freq_table[index].frequency * 1000;
+
+	ret = perf_ops->freq_set(handle, priv->domain_id, freq, false);
+	if (!ret)
+		arch_set_freq_scale(policy->related_cpus, freq,
+				    policy->cpuinfo.max_freq);
+	return ret;
+}
+
+static unsigned int scmi_cpufreq_fast_switch(struct cpufreq_policy *policy,
+					     unsigned int target_freq)
+{
+	struct scmi_data *priv = policy->driver_data;
+	struct scmi_perf_ops *perf_ops = handle->perf_ops;
+
+	if (!perf_ops->freq_set(handle, priv->domain_id,
+				target_freq * 1000, true)) {
+		arch_set_freq_scale(policy->related_cpus, target_freq,
+				    policy->cpuinfo.max_freq);
+		return target_freq;
+	}
+
+	return 0;
+}
+
+static int
+scmi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
+{
+	int cpu, domain, tdomain;
+	struct device *tcpu_dev;
+
+	domain = handle->perf_ops->device_domain_id(cpu_dev);
+	if (domain < 0)
+		return domain;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		tcpu_dev = get_cpu_device(cpu);
+		if (!tcpu_dev)
+			continue;
+
+		tdomain = handle->perf_ops->device_domain_id(tcpu_dev);
+		if (tdomain == domain)
+			cpumask_set_cpu(cpu, cpumask);
+	}
+
+	return 0;
+}
+
+static int scmi_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret;
+	unsigned int latency;
+	struct device *cpu_dev;
+	struct scmi_data *priv;
+	struct cpufreq_frequency_table *freq_table;
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	ret = handle->perf_ops->add_opps_to_device(handle, cpu_dev);
+	if (ret) {
+		dev_warn(cpu_dev, "failed to add opps to the device\n");
+		return ret;
+	}
+
+	ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus);
+	if (ret) {
+		dev_warn(cpu_dev, "failed to get sharing cpumask\n");
+		return ret;
+	}
+
+	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
+	if (ret) {
+		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = dev_pm_opp_get_opp_count(cpu_dev);
+	if (ret <= 0) {
+		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
+		ret = -EPROBE_DEFER;
+		goto out_free_opp;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out_free_opp;
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+		goto out_free_priv;
+	}
+
+	priv->cpu_dev = cpu_dev;
+	priv->domain_id = handle->perf_ops->device_domain_id(cpu_dev);
+
+	policy->driver_data = priv;
+
+	ret = cpufreq_table_validate_and_show(policy, freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+			ret);
+		goto out_free_cpufreq_table;
+	}
+
+	/* SCMI allows DVFS request for any domain from any CPU */
+	policy->dvfs_possible_from_any_cpu = true;
+
+	latency = handle->perf_ops->get_transition_latency(handle, cpu_dev);
+	if (!latency)
+		latency = CPUFREQ_ETERNAL;
+
+	policy->cpuinfo.transition_latency = latency;
+
+	policy->fast_switch_possible = true;
+	return 0;
+
+out_free_cpufreq_table:
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_priv:
+	kfree(priv);
+out_free_opp:
+	dev_pm_opp_cpumask_remove_table(policy->cpus);
+
+	return ret;
+}
+
+static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	struct scmi_data *priv = policy->driver_data;
+
+	cpufreq_cooling_unregister(priv->cdev);
+	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
+	kfree(priv);
+	dev_pm_opp_cpumask_remove_table(policy->related_cpus);
+
+	return 0;
+}
+
+static void scmi_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	struct scmi_data *priv = policy->driver_data;
+
+	priv->cdev = of_cpufreq_cooling_register(policy);
+}
+
+static struct cpufreq_driver scmi_cpufreq_driver = {
+	.name	= "scmi",
+	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify	= cpufreq_generic_frequency_table_verify,
+	.attr	= cpufreq_generic_attr,
+	.target_index	= scmi_cpufreq_set_target,
+	.fast_switch	= scmi_cpufreq_fast_switch,
+	.get	= scmi_cpufreq_get_rate,
+	.init	= scmi_cpufreq_init,
+	.exit	= scmi_cpufreq_exit,
+	.ready	= scmi_cpufreq_ready,
+};
+
+static int scmi_cpufreq_probe(struct scmi_device *sdev)
+{
+	int ret;
+
+	handle = sdev->handle;
+
+	if (!handle || !handle->perf_ops)
+		return -ENODEV;
+
+	ret = cpufreq_register_driver(&scmi_cpufreq_driver);
+	if (ret) {
+		dev_err(&sdev->dev, "%s: registering cpufreq failed, err: %d\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static void scmi_cpufreq_remove(struct scmi_device *sdev)
+{
+	cpufreq_unregister_driver(&scmi_cpufreq_driver);
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+	{ SCMI_PROTOCOL_PERF },
+	{ },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_cpufreq_drv = {
+	.name		= "scmi-cpufreq",
+	.probe		= scmi_cpufreq_probe,
+	.remove		= scmi_cpufreq_remove,
+	.id_table	= scmi_id_table,
+};
+module_scmi_driver(scmi_cpufreq_drv);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI CPUFreq interface driver");
+MODULE_LICENSE("GPL v2");

drivers/firmware/Kconfig

@@ -19,6 +19,40 @@ config ARM_PSCI_CHECKER
 	  on and off through hotplug, so for now torture tests and PSCI checker
 	  are mutually exclusive.
 
+config ARM_SCMI_PROTOCOL
+	bool "ARM System Control and Management Interface (SCMI) Message Protocol"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on MAILBOX
+	help
+	  ARM System Control and Management Interface (SCMI) protocol is a
+	  set of operating system-independent software interfaces that are
+	  used in system management. SCMI is extensible and currently provides
+	  interfaces for: Discovery and self-description of the interfaces
+	  it supports, Power domain management which is the ability to place
+	  a given device or domain into the various power-saving states that
+	  it supports, Performance management which is the ability to control
+	  the performance of a domain that is composed of compute engines
+	  such as application processors and other accelerators, Clock
+	  management which is the ability to set and inquire rates on platform
+	  managed clocks and Sensor management which is the ability to read
+	  sensor data, and be notified of sensor value.
+
+	  This protocol library provides interface for all the client drivers
+	  making use of the features offered by the SCMI.
+
+config ARM_SCMI_POWER_DOMAIN
+	tristate "SCMI power domain driver"
+	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+	default y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the SCMI power domains which can be
+	  enabled or disabled via the SCP firmware
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called scmi_pm_domain. Note this may needed early in boot
+	  before rootfs may be available.
+
 config ARM_SCPI_PROTOCOL
 	tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
 	depends on ARM || ARM64 || COMPILE_TEST

drivers/firmware/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_QCOM_SCM_32)	+= qcom_scm-32.o
 CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
 obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
 
+obj-$(CONFIG_ARM_SCMI_PROTOCOL)	+= arm_scmi/
 obj-y				+= broadcom/
 obj-y				+= meson/
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/

drivers/firmware/arm_scmi/Makefile

+obj-y	= scmi-bus.o scmi-driver.o scmi-protocols.o
+scmi-bus-y = bus.o
+scmi-driver-y = driver.o
+scmi-protocols-y = base.o clock.o perf.o power.o sensors.o
+obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o

drivers/firmware/arm_scmi/base.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Base Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include "common.h"
+
+enum scmi_base_protocol_cmd {
+	BASE_DISCOVER_VENDOR = 0x3,
+	BASE_DISCOVER_SUB_VENDOR = 0x4,
+	BASE_DISCOVER_IMPLEMENT_VERSION = 0x5,
+	BASE_DISCOVER_LIST_PROTOCOLS = 0x6,
+	BASE_DISCOVER_AGENT = 0x7,
+	BASE_NOTIFY_ERRORS = 0x8,
+};
+
+struct scmi_msg_resp_base_attributes {
+	u8 num_protocols;
+	u8 num_agents;
+	__le16 reserved;
+};
+
+/**
+ * scmi_base_attributes_get() - gets the implementation details
+ *	that are associated with the base protocol.
+ *
+ * @handle - SCMI entity handle
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int scmi_base_attributes_get(const struct scmi_handle *handle)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_base_attributes *attr_info;
+	struct scmi_revision_info *rev = handle->version;
+
+	ret = scmi_one_xfer_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_BASE, 0, sizeof(*attr_info), &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		attr_info = t->rx.buf;
+		rev->num_protocols = attr_info->num_protocols;
+		rev->num_agents = attr_info->num_agents;
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+/**
+ * scmi_base_vendor_id_get() - gets vendor/subvendor identifier ASCII string.
+ *
+ * @handle - SCMI entity handle
+ * @sub_vendor - specify true if sub-vendor ID is needed
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int
+scmi_base_vendor_id_get(const struct scmi_handle *handle, bool sub_vendor)
+{
+	u8 cmd;
+	int ret, size;
+	char *vendor_id;
+	struct scmi_xfer *t;
+	struct scmi_revision_info *rev = handle->version;
+
+	if (sub_vendor) {
+		cmd = BASE_DISCOVER_SUB_VENDOR;
+		vendor_id = rev->sub_vendor_id;
+		size = ARRAY_SIZE(rev->sub_vendor_id);
+	} else {
+		cmd = BASE_DISCOVER_VENDOR;
+		vendor_id = rev->vendor_id;
+		size = ARRAY_SIZE(rev->vendor_id);
+	}
+
+	ret = scmi_one_xfer_init(handle, cmd, SCMI_PROTOCOL_BASE, 0, size, &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		memcpy(vendor_id, t->rx.buf, size);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+/**
+ * scmi_base_implementation_version_get() - gets a vendor-specific
+ *	implementation 32-bit version. The format of the version number is
+ *	vendor-specific
+ *
+ * @handle - SCMI entity handle
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int
+scmi_base_implementation_version_get(const struct scmi_handle *handle)
+{
+	int ret;
+	__le32 *impl_ver;
+	struct scmi_xfer *t;
+	struct scmi_revision_info *rev = handle->version;
+
+	ret = scmi_one_xfer_init(handle, BASE_DISCOVER_IMPLEMENT_VERSION,
+				 SCMI_PROTOCOL_BASE, 0, sizeof(*impl_ver), &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		impl_ver = t->rx.buf;
+		rev->impl_ver = le32_to_cpu(*impl_ver);
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+/**
+ * scmi_base_implementation_list_get() - gets the list of protocols it is
+ *	OSPM is allowed to access
+ *
+ * @handle - SCMI entity handle
+ * @protocols_imp - pointer to hold the list of protocol identifiers
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int scmi_base_implementation_list_get(const struct scmi_handle *handle,
+					     u8 *protocols_imp)
+{
+	u8 *list;
+	int ret, loop;
+	struct scmi_xfer *t;
+	__le32 *num_skip, *num_ret;
+	u32 tot_num_ret = 0, loop_num_ret;
+	struct device *dev = handle->dev;
+
+	ret = scmi_one_xfer_init(handle, BASE_DISCOVER_LIST_PROTOCOLS,
+				 SCMI_PROTOCOL_BASE, sizeof(*num_skip), 0, &t);
+	if (ret)
+		return ret;
+
+	num_skip = t->tx.buf;
+	num_ret = t->rx.buf;
+	list = t->rx.buf + sizeof(*num_ret);
+
+	do {
+		/* Set the number of protocols to be skipped/already read */
+		*num_skip = cpu_to_le32(tot_num_ret);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			break;
+
+		loop_num_ret = le32_to_cpu(*num_ret);
+		if (tot_num_ret + loop_num_ret > MAX_PROTOCOLS_IMP) {
+			dev_err(dev, "No. of Protocol > MAX_PROTOCOLS_IMP");
+			break;
+		}
+
+		for (loop = 0; loop < loop_num_ret; loop++)
+			protocols_imp[tot_num_ret + loop] = *(list + loop);
+
+		tot_num_ret += loop_num_ret;
+	} while (loop_num_ret);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+/**
+ * scmi_base_discover_agent_get() - discover the name of an agent
+ *
+ * @handle - SCMI entity handle
+ * @id - Agent identifier
+ * @name - Agent identifier ASCII string
+ *
+ * An agent id of 0 is reserved to identify the platform itself.
+ * Generally operating system is represented as "OSPM"
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
+					int id, char *name)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_one_xfer_init(handle, BASE_DISCOVER_AGENT,
+				 SCMI_PROTOCOL_BASE, sizeof(__le32),
+				 SCMI_MAX_STR_SIZE, &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(id);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		memcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+int scmi_base_protocol_init(struct scmi_handle *h)
+{
+	int id, ret;
+	u8 *prot_imp;
+	u32 version;
+	char name[SCMI_MAX_STR_SIZE];
+	const struct scmi_handle *handle = h;
+	struct device *dev = handle->dev;
+	struct scmi_revision_info *rev = handle->version;
+
+	ret = scmi_version_get(handle, SCMI_PROTOCOL_BASE, &version);
+	if (ret)
+		return ret;
+
+	prot_imp = devm_kcalloc(dev, MAX_PROTOCOLS_IMP, sizeof(u8), GFP_KERNEL);
+	if (!prot_imp)
+		return -ENOMEM;
+
+	rev->major_ver = PROTOCOL_REV_MAJOR(version),
+	rev->minor_ver = PROTOCOL_REV_MINOR(version);
+
+	scmi_base_attributes_get(handle);
+	scmi_base_vendor_id_get(handle, false);
+	scmi_base_vendor_id_get(handle, true);
+	scmi_base_implementation_version_get(handle);
+	scmi_base_implementation_list_get(handle, prot_imp);
+	scmi_setup_protocol_implemented(handle, prot_imp);
+
+	dev_info(dev, "SCMI Protocol v%d.%d '%s:%s' Firmware version 0x%x\n",
+		 rev->major_ver, rev->minor_ver, rev->vendor_id,
+		 rev->sub_vendor_id, rev->impl_ver);
+	dev_dbg(dev, "Found %d protocol(s) %d agent(s)\n", rev->num_protocols,
+		rev->num_agents);
+
+	for (id = 0; id < rev->num_agents; id++) {
+		scmi_base_discover_agent_get(handle, id, name);
+		dev_dbg(dev, "Agent %d: %s\n", id, name);
+	}
+
+	return 0;
+}

drivers/firmware/arm_scmi/bus.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Protocol bus layer
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include "common.h"
+
+static DEFINE_IDA(scmi_bus_id);
+static DEFINE_IDR(scmi_protocols);
+static DEFINE_SPINLOCK(protocol_lock);
+
+static const struct scmi_device_id *
+scmi_dev_match_id(struct scmi_device *scmi_dev, struct scmi_driver *scmi_drv)
+{
+	const struct scmi_device_id *id = scmi_drv->id_table;
+
+	if (!id)
+		return NULL;
+
+	for (; id->protocol_id; id++)
+		if (id->protocol_id == scmi_dev->protocol_id)
+			return id;
+
+	return NULL;
+}
+
+static int scmi_dev_match(struct device *dev, struct device_driver *drv)
+{
+	struct scmi_driver *scmi_drv = to_scmi_driver(drv);
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+	const struct scmi_device_id *id;
+
+	id = scmi_dev_match_id(scmi_dev, scmi_drv);
+	if (id)
+		return 1;
+
+	return 0;
+}
+
+static int scmi_protocol_init(int protocol_id, struct scmi_handle *handle)
+{
+	scmi_prot_init_fn_t fn = idr_find(&scmi_protocols, protocol_id);
+
+	if (unlikely(!fn))
+		return -EINVAL;
+	return fn(handle);
+}
+
+static int scmi_dev_probe(struct device *dev)
+{
+	struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver);
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+	const struct scmi_device_id *id;
+	int ret;
+
+	id = scmi_dev_match_id(scmi_dev, scmi_drv);
+	if (!id)
+		return -ENODEV;
+
+	if (!scmi_dev->handle)
+		return -EPROBE_DEFER;
+
+	ret = scmi_protocol_init(scmi_dev->protocol_id, scmi_dev->handle);
+	if (ret)
+		return ret;
+
+	return scmi_drv->probe(scmi_dev);
+}
+
+static int scmi_dev_remove(struct device *dev)
+{
+	struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver);
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+
+	if (scmi_drv->remove)
+		scmi_drv->remove(scmi_dev);
+
+	return 0;
+}
+
+static struct bus_type scmi_bus_type = {
+	.name =	"scmi_protocol",
+	.match = scmi_dev_match,
+	.probe = scmi_dev_probe,
+	.remove = scmi_dev_remove,
+};
+
+int scmi_driver_register(struct scmi_driver *driver, struct module *owner,
+			 const char *mod_name)
+{
+	int retval;
+
+	driver->driver.bus = &scmi_bus_type;
+	driver->driver.name = driver->name;
+	driver->driver.owner = owner;
+	driver->driver.mod_name = mod_name;
+
+	retval = driver_register(&driver->driver);
+	if (!retval)
+		pr_debug("registered new scmi driver %s\n", driver->name);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(scmi_driver_register);
+
+void scmi_driver_unregister(struct scmi_driver *driver)
+{
+	driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL_GPL(scmi_driver_unregister);
+
+struct scmi_device *
+scmi_device_create(struct device_node *np, struct device *parent, int protocol)
+{
+	int id, retval;
+	struct scmi_device *scmi_dev;
+
+	id = ida_simple_get(&scmi_bus_id, 1, 0, GFP_KERNEL);
+	if (id < 0)
+		return NULL;
+
+	scmi_dev = kzalloc(sizeof(*scmi_dev), GFP_KERNEL);
+	if (!scmi_dev)
+		goto no_mem;
+
+	scmi_dev->id = id;
+	scmi_dev->protocol_id = protocol;
+	scmi_dev->dev.parent = parent;
+	scmi_dev->dev.of_node = np;
+	scmi_dev->dev.bus = &scmi_bus_type;
+	dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id);
+
+	retval = device_register(&scmi_dev->dev);
+	if (!retval)
+		return scmi_dev;
+
+	put_device(&scmi_dev->dev);
+	kfree(scmi_dev);
+no_mem:
+	ida_simple_remove(&scmi_bus_id, id);
+	return NULL;
+}
+
+void scmi_device_destroy(struct scmi_device *scmi_dev)
+{
+	scmi_handle_put(scmi_dev->handle);
+	device_unregister(&scmi_dev->dev);
+	ida_simple_remove(&scmi_bus_id, scmi_dev->id);
+	kfree(scmi_dev);
+}
+
+void scmi_set_handle(struct scmi_device *scmi_dev)
+{
+	scmi_dev->handle = scmi_handle_get(&scmi_dev->dev);
+}
+
+int scmi_protocol_register(int protocol_id, scmi_prot_init_fn_t fn)
+{
+	int ret;
+
+	spin_lock(&protocol_lock);
+	ret = idr_alloc(&scmi_protocols, fn, protocol_id, protocol_id + 1,
+			GFP_ATOMIC);
+	if (ret != protocol_id)
+		pr_err("unable to allocate SCMI idr slot, err %d\n", ret);
+	spin_unlock(&protocol_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(scmi_protocol_register);
+
+void scmi_protocol_unregister(int protocol_id)
+{
+	spin_lock(&protocol_lock);
+	idr_remove(&scmi_protocols, protocol_id);
+	spin_unlock(&protocol_lock);
+}
+EXPORT_SYMBOL_GPL(scmi_protocol_unregister);
+
+static int __scmi_devices_unregister(struct device *dev, void *data)
+{
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+
+	scmi_device_destroy(scmi_dev);
+	return 0;
+}
+
+static void scmi_devices_unregister(void)
+{
+	bus_for_each_dev(&scmi_bus_type, NULL, NULL, __scmi_devices_unregister);
+}
+
+static int __init scmi_bus_init(void)
+{
+	int retval;
+
+	retval = bus_register(&scmi_bus_type);
+	if (retval)
+		pr_err("scmi protocol bus register failed (%d)\n", retval);
+
+	return retval;
+}
+subsys_initcall(scmi_bus_init);
+
+static void __exit scmi_bus_exit(void)
+{
+	scmi_devices_unregister();
+	bus_unregister(&scmi_bus_type);
+	ida_destroy(&scmi_bus_id);
+}
+module_exit(scmi_bus_exit);

drivers/firmware/arm_scmi/clock.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Clock Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include "common.h"
+
+enum scmi_clock_protocol_cmd {
+	CLOCK_ATTRIBUTES = 0x3,
+	CLOCK_DESCRIBE_RATES = 0x4,
+	CLOCK_RATE_SET = 0x5,
+	CLOCK_RATE_GET = 0x6,
+	CLOCK_CONFIG_SET = 0x7,
+};
+
+struct scmi_msg_resp_clock_protocol_attributes {
+	__le16 num_clocks;
+	u8 max_async_req;
+	u8 reserved;
+};
+
+struct scmi_msg_resp_clock_attributes {
+	__le32 attributes;
+#define	CLOCK_ENABLE	BIT(0)
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_clock_set_config {
+	__le32 id;
+	__le32 attributes;
+};
+
+struct scmi_msg_clock_describe_rates {
+	__le32 id;
+	__le32 rate_index;
+};
+
+struct scmi_msg_resp_clock_describe_rates {
+	__le32 num_rates_flags;
+#define NUM_RETURNED(x)		((x) & 0xfff)
+#define RATE_DISCRETE(x)	!((x) & BIT(12))
+#define NUM_REMAINING(x)	((x) >> 16)
+	struct {
+		__le32 value_low;
+		__le32 value_high;
+	} rate[0];
+#define RATE_TO_U64(X)		\
+({				\
+	typeof(X) x = (X);	\
+	le32_to_cpu((x).value_low) | (u64)le32_to_cpu((x).value_high) << 32; \
+})
+};
+
+struct scmi_clock_set_rate {
+	__le32 flags;
+#define CLOCK_SET_ASYNC		BIT(0)
+#define CLOCK_SET_DELAYED	BIT(1)
+#define CLOCK_SET_ROUND_UP	BIT(2)
+#define CLOCK_SET_ROUND_AUTO	BIT(3)
+	__le32 id;
+	__le32 value_low;
+	__le32 value_high;
+};
+
+struct clock_info {
+	int num_clocks;
+	int max_async_req;
+	struct scmi_clock_info *clk;
+};
+
+static int scmi_clock_protocol_attributes_get(const struct scmi_handle *handle,
+					      struct clock_info *ci)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_clock_protocol_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_CLOCK, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		ci->num_clocks = le16_to_cpu(attr->num_clocks);
+		ci->max_async_req = attr->max_async_req;
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_clock_attributes_get(const struct scmi_handle *handle,
+				     u32 clk_id, struct scmi_clock_info *clk)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_clock_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_ATTRIBUTES, SCMI_PROTOCOL_CLOCK,
+				 sizeof(clk_id), sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		memcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+	else
+		clk->name[0] = '\0';
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id,
+			      struct scmi_clock_info *clk)
+{
+	u64 *rate;
+	int ret, cnt;
+	bool rate_discrete = false;
+	u32 tot_rate_cnt = 0, rates_flag;
+	u16 num_returned, num_remaining;
+	struct scmi_xfer *t;
+	struct scmi_msg_clock_describe_rates *clk_desc;
+	struct scmi_msg_resp_clock_describe_rates *rlist;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_DESCRIBE_RATES,
+				 SCMI_PROTOCOL_CLOCK, sizeof(*clk_desc), 0, &t);
+	if (ret)
+		return ret;
+
+	clk_desc = t->tx.buf;
+	rlist = t->rx.buf;
+
+	do {
+		clk_desc->id = cpu_to_le32(clk_id);
+		/* Set the number of rates to be skipped/already read */
+		clk_desc->rate_index = cpu_to_le32(tot_rate_cnt);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			goto err;
+
+		rates_flag = le32_to_cpu(rlist->num_rates_flags);
+		num_remaining = NUM_REMAINING(rates_flag);
+		rate_discrete = RATE_DISCRETE(rates_flag);
+		num_returned = NUM_RETURNED(rates_flag);
+
+		if (tot_rate_cnt + num_returned > SCMI_MAX_NUM_RATES) {
+			dev_err(handle->dev, "No. of rates > MAX_NUM_RATES");
+			break;
+		}
+
+		if (!rate_discrete) {
+			clk->range.min_rate = RATE_TO_U64(rlist->rate[0]);
+			clk->range.max_rate = RATE_TO_U64(rlist->rate[1]);
+			clk->range.step_size = RATE_TO_U64(rlist->rate[2]);
+			dev_dbg(handle->dev, "Min %llu Max %llu Step %llu Hz\n",
+				clk->range.min_rate, clk->range.max_rate,
+				clk->range.step_size);
+			break;
+		}
+
+		rate = &clk->list.rates[tot_rate_cnt];
+		for (cnt = 0; cnt < num_returned; cnt++, rate++) {
+			*rate = RATE_TO_U64(rlist->rate[cnt]);
+			dev_dbg(handle->dev, "Rate %llu Hz\n", *rate);
+		}
+
+		tot_rate_cnt += num_returned;
+		/*
+		 * check for both returned and remaining to avoid infinite
+		 * loop due to buggy firmware
+		 */
+	} while (num_returned && num_remaining);
+
+	if (rate_discrete)
+		clk->list.num_rates = tot_rate_cnt;
+
+err:
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_rate_get(const struct scmi_handle *handle, u32 clk_id, u64 *value)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_RATE_GET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(__le32), sizeof(u64), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		__le32 *pval = t->rx.buf;
+
+		*value = le32_to_cpu(*pval);
+		*value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
+			       u32 config, u64 rate)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_clock_set_rate *cfg;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->flags = cpu_to_le32(config);
+	cfg->id = cpu_to_le32(clk_id);
+	cfg->value_low = cpu_to_le32(rate & 0xffffffff);
+	cfg->value_high = cpu_to_le32(rate >> 32);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_config_set(const struct scmi_handle *handle, u32 clk_id, u32 config)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_clock_set_config *cfg;
+
+	ret = scmi_one_xfer_init(handle, CLOCK_CONFIG_SET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->id = cpu_to_le32(clk_id);
+	cfg->attributes = cpu_to_le32(config);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_clock_enable(const struct scmi_handle *handle, u32 clk_id)
+{
+	return scmi_clock_config_set(handle, clk_id, CLOCK_ENABLE);
+}
+
+static int scmi_clock_disable(const struct scmi_handle *handle, u32 clk_id)
+{
+	return scmi_clock_config_set(handle, clk_id, 0);
+}
+
+static int scmi_clock_count_get(const struct scmi_handle *handle)
+{
+	struct clock_info *ci = handle->clk_priv;
+
+	return ci->num_clocks;
+}
+
+static const struct scmi_clock_info *
+scmi_clock_info_get(const struct scmi_handle *handle, u32 clk_id)
+{
+	struct clock_info *ci = handle->clk_priv;
+	struct scmi_clock_info *clk = ci->clk + clk_id;
+
+	if (!clk->name || !clk->name[0])
+		return NULL;
+
+	return clk;
+}
+
+static struct scmi_clk_ops clk_ops = {
+	.count_get = scmi_clock_count_get,
+	.info_get = scmi_clock_info_get,
+	.rate_get = scmi_clock_rate_get,
+	.rate_set = scmi_clock_rate_set,
+	.enable = scmi_clock_enable,
+	.disable = scmi_clock_disable,
+};
+
+static int scmi_clock_protocol_init(struct scmi_handle *handle)
+{
+	u32 version;
+	int clkid, ret;
+	struct clock_info *cinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_CLOCK, &version);
+
+	dev_dbg(handle->dev, "Clock Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	cinfo = devm_kzalloc(handle->dev, sizeof(*cinfo), GFP_KERNEL);
+	if (!cinfo)
+		return -ENOMEM;
+
+	scmi_clock_protocol_attributes_get(handle, cinfo);
+
+	cinfo->clk = devm_kcalloc(handle->dev, cinfo->num_clocks,
+				  sizeof(*cinfo->clk), GFP_KERNEL);
+	if (!cinfo->clk)
+		return -ENOMEM;
+
+	for (clkid = 0; clkid < cinfo->num_clocks; clkid++) {
+		struct scmi_clock_info *clk = cinfo->clk + clkid;
+
+		ret = scmi_clock_attributes_get(handle, clkid, clk);
+		if (!ret)
+			scmi_clock_describe_rates_get(handle, clkid, clk);
+	}
+
+	handle->clk_ops = &clk_ops;
+	handle->clk_priv = cinfo;
+
+	return 0;
+}
+
+static int __init scmi_clock_init(void)
+{
+	return scmi_protocol_register(SCMI_PROTOCOL_CLOCK,
+				      &scmi_clock_protocol_init);
+}
+subsys_initcall(scmi_clock_init);

drivers/firmware/arm_scmi/common.h

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Protocol
+ * driver common header file containing some definitions, structures
+ * and function prototypes used in all the different SCMI protocols.
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/scmi_protocol.h>
+#include <linux/types.h>
+
+#define PROTOCOL_REV_MINOR_BITS	16
+#define PROTOCOL_REV_MINOR_MASK	((1U << PROTOCOL_REV_MINOR_BITS) - 1)
+#define PROTOCOL_REV_MAJOR(x)	((x) >> PROTOCOL_REV_MINOR_BITS)
+#define PROTOCOL_REV_MINOR(x)	((x) & PROTOCOL_REV_MINOR_MASK)
+#define MAX_PROTOCOLS_IMP	16
+#define MAX_OPPS		16
+
+enum scmi_common_cmd {
+	PROTOCOL_VERSION = 0x0,
+	PROTOCOL_ATTRIBUTES = 0x1,
+	PROTOCOL_MESSAGE_ATTRIBUTES = 0x2,
+};
+
+/**
+ * struct scmi_msg_resp_prot_version - Response for a message
+ *
+ * @major_version: Major version of the ABI that firmware supports
+ * @minor_version: Minor version of the ABI that firmware supports
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to a generic message with message type SCMI_MSG_VERSION
+ */
+struct scmi_msg_resp_prot_version {
+	__le16 minor_version;
+	__le16 major_version;
+};
+
+/**
+ * struct scmi_msg_hdr - Message(Tx/Rx) header
+ *
+ * @id: The identifier of the command being sent
+ * @protocol_id: The identifier of the protocol used to send @id command
+ * @seq: The token to identify the message. when a message/command returns,
+ *       the platform returns the whole message header unmodified including
+ *	 the token.
+ */
+struct scmi_msg_hdr {
+	u8 id;
+	u8 protocol_id;
+	u16 seq;
+	u32 status;
+	bool poll_completion;
+};
+
+/**
+ * struct scmi_msg - Message(Tx/Rx) structure
+ *
+ * @buf: Buffer pointer
+ * @len: Length of data in the Buffer
+ */
+struct scmi_msg {
+	void *buf;
+	size_t len;
+};
+
+/**
+ * struct scmi_xfer - Structure representing a message flow
+ *
+ * @hdr: Transmit message header
+ * @tx: Transmit message
+ * @rx: Receive message, the buffer should be pre-allocated to store
+ *	message. If request-ACK protocol is used, we can reuse the same
+ *	buffer for the rx path as we use for the tx path.
+ * @done: completion event
+ */
+
+struct scmi_xfer {
+	void *con_priv;
+	struct scmi_msg_hdr hdr;
+	struct scmi_msg tx;
+	struct scmi_msg rx;
+	struct completion done;
+};
+
+void scmi_one_xfer_put(const struct scmi_handle *h, struct scmi_xfer *xfer);
+int scmi_do_xfer(const struct scmi_handle *h, struct scmi_xfer *xfer);
+int scmi_one_xfer_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id,
+		       size_t tx_size, size_t rx_size, struct scmi_xfer **p);
+int scmi_handle_put(const struct scmi_handle *handle);
+struct scmi_handle *scmi_handle_get(struct device *dev);
+void scmi_set_handle(struct scmi_device *scmi_dev);
+int scmi_version_get(const struct scmi_handle *h, u8 protocol, u32 *version);
+void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
+				     u8 *prot_imp);
+
+int scmi_base_protocol_init(struct scmi_handle *h);

drivers/firmware/arm_scmi/power.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Power Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include "common.h"
+
+enum scmi_power_protocol_cmd {
+	POWER_DOMAIN_ATTRIBUTES = 0x3,
+	POWER_STATE_SET = 0x4,
+	POWER_STATE_GET = 0x5,
+	POWER_STATE_NOTIFY = 0x6,
+};
+
+struct scmi_msg_resp_power_attributes {
+	__le16 num_domains;
+	__le16 reserved;
+	__le32 stats_addr_low;
+	__le32 stats_addr_high;
+	__le32 stats_size;
+};
+
+struct scmi_msg_resp_power_domain_attributes {
+	__le32 flags;
+#define SUPPORTS_STATE_SET_NOTIFY(x)	((x) & BIT(31))
+#define SUPPORTS_STATE_SET_ASYNC(x)	((x) & BIT(30))
+#define SUPPORTS_STATE_SET_SYNC(x)	((x) & BIT(29))
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_power_set_state {
+	__le32 flags;
+#define STATE_SET_ASYNC		BIT(0)
+	__le32 domain;
+	__le32 state;
+};
+
+struct scmi_power_state_notify {
+	__le32 domain;
+	__le32 notify_enable;
+};
+
+struct power_dom_info {
+	bool state_set_sync;
+	bool state_set_async;
+	bool state_set_notify;
+	char name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_power_info {
+	int num_domains;
+	u64 stats_addr;
+	u32 stats_size;
+	struct power_dom_info *dom_info;
+};
+
+static int scmi_power_attributes_get(const struct scmi_handle *handle,
+				     struct scmi_power_info *pi)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_power_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_POWER, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		pi->num_domains = le16_to_cpu(attr->num_domains);
+		pi->stats_addr = le32_to_cpu(attr->stats_addr_low) |
+				(u64)le32_to_cpu(attr->stats_addr_high) << 32;
+		pi->stats_size = le32_to_cpu(attr->stats_size);
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
+				 struct power_dom_info *dom_info)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_power_domain_attributes *attr;
+
+	ret = scmi_one_xfer_init(handle, POWER_DOMAIN_ATTRIBUTES,
+				 SCMI_PROTOCOL_POWER, sizeof(domain),
+				 sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(domain);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u32 flags = le32_to_cpu(attr->flags);
+
+		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
+		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
+		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
+		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+	}
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_power_state_set(const struct scmi_handle *handle, u32 domain, u32 state)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_power_set_state *st;
+
+	ret = scmi_one_xfer_init(handle, POWER_STATE_SET, SCMI_PROTOCOL_POWER,
+				 sizeof(*st), 0, &t);
+	if (ret)
+		return ret;
+
+	st = t->tx.buf;
+	st->flags = cpu_to_le32(0);
+	st->domain = cpu_to_le32(domain);
+	st->state = cpu_to_le32(state);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_power_state_get(const struct scmi_handle *handle, u32 domain, u32 *state)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_one_xfer_init(handle, POWER_STATE_GET, SCMI_PROTOCOL_POWER,
+				 sizeof(u32), sizeof(u32), &t);
+	if (ret)
+		return ret;
+
+	*(__le32 *)t->tx.buf = cpu_to_le32(domain);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		*state = le32_to_cpu(*(__le32 *)t->rx.buf);
+
+	scmi_one_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_power_num_domains_get(const struct scmi_handle *handle)
+{
+	struct scmi_power_info *pi = handle->power_priv;
+
+	return pi->num_domains;
+}
+
+static char *scmi_power_name_get(const struct scmi_handle *handle, u32 domain)
+{
+	struct scmi_power_info *pi = handle->power_priv;
+	struct power_dom_info *dom = pi->dom_info + domain;
+
+	return dom->name;
+}
+
+static struct scmi_power_ops power_ops = {
+	.num_domains_get = scmi_power_num_domains_get,
+	.name_get = scmi_power_name_get,
+	.state_set = scmi_power_state_set,
+	.state_get = scmi_power_state_get,
+};
+
+static int scmi_power_protocol_init(struct scmi_handle *handle)
+{
+	int domain;
+	u32 version;
+	struct scmi_power_info *pinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_POWER, &version);
+
+	dev_dbg(handle->dev, "Power Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	scmi_power_attributes_get(handle, pinfo);
+
+	pinfo->dom_info = devm_kcalloc(handle->dev, pinfo->num_domains,
+				       sizeof(*pinfo->dom_info), GFP_KERNEL);
+	if (!pinfo->dom_info)
+		return -ENOMEM;
+
+	for (domain = 0; domain < pinfo->num_domains; domain++) {
+		struct power_dom_info *dom = pinfo->dom_info + domain;
+
+		scmi_power_domain_attributes_get(handle, domain, dom);
+	}
+
+	handle->power_ops = &power_ops;
+	handle->power_priv = pinfo;
+
+	return 0;
+}
+
+static int __init scmi_power_init(void)
+{
+	return scmi_protocol_register(SCMI_PROTOCOL_POWER,
+				      &scmi_power_protocol_init);
+}
+subsys_initcall(scmi_power_init);

drivers/firmware/arm_scmi/scmi_pm_domain.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SCMI Generic power domain support.
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_domain.h>
+#include <linux/scmi_protocol.h>
+
+struct scmi_pm_domain {
+	struct generic_pm_domain genpd;
+	const struct scmi_handle *handle;
+	const char *name;
+	u32 domain;
+};
+
+#define to_scmi_pd(gpd) container_of(gpd, struct scmi_pm_domain, genpd)
+
+static int scmi_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+	int ret;
+	u32 state, ret_state;
+	struct scmi_pm_domain *pd = to_scmi_pd(domain);
+	const struct scmi_power_ops *ops = pd->handle->power_ops;
+
+	if (power_on)
+		state = SCMI_POWER_STATE_GENERIC_ON;
+	else
+		state = SCMI_POWER_STATE_GENERIC_OFF;
+
+	ret = ops->state_set(pd->handle, pd->domain, state);
+	if (!ret)
+		ret = ops->state_get(pd->handle, pd->domain, &ret_state);
+	if (!ret && state != ret_state)
+		return -EIO;
+
+	return ret;
+}
+
+static int scmi_pd_power_on(struct generic_pm_domain *domain)
+{
+	return scmi_pd_power(domain, true);
+}
+
+static int scmi_pd_power_off(struct generic_pm_domain *domain)
+{
+	return scmi_pd_power(domain, false);
+}
+
+static int scmi_pm_domain_probe(struct scmi_device *sdev)
+{
+	int num_domains, i;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+	struct scmi_pm_domain *scmi_pd;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct generic_pm_domain **domains;
+	const struct scmi_handle *handle = sdev->handle;
+
+	if (!handle || !handle->power_ops)
+		return -ENODEV;
+
+	num_domains = handle->power_ops->num_domains_get(handle);
+	if (num_domains < 0) {
+		dev_err(dev, "number of domains not found\n");
+		return num_domains;
+	}
+
+	scmi_pd = devm_kcalloc(dev, num_domains, sizeof(*scmi_pd), GFP_KERNEL);
+	if (!scmi_pd)
+		return -ENOMEM;
+
+	scmi_pd_data = devm_kzalloc(dev, sizeof(*scmi_pd_data), GFP_KERNEL);
+	if (!scmi_pd_data)
+		return -ENOMEM;
+
+	domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	for (i = 0; i < num_domains; i++, scmi_pd++) {
+		u32 state;
+
+		domains[i] = &scmi_pd->genpd;
+
+		scmi_pd->domain = i;
+		scmi_pd->handle = handle;
+		scmi_pd->name = handle->power_ops->name_get(handle, i);
+		scmi_pd->genpd.name = scmi_pd->name;
+		scmi_pd->genpd.power_off = scmi_pd_power_off;
+		scmi_pd->genpd.power_on = scmi_pd_power_on;
+
+		if (handle->power_ops->state_get(handle, i, &state)) {
+			dev_warn(dev, "failed to get state for domain %d\n", i);
+			continue;
+		}
+
+		pm_genpd_init(&scmi_pd->genpd, NULL,
+			      state == SCMI_POWER_STATE_GENERIC_OFF);
+	}
+
+	scmi_pd_data->domains = domains;
+	scmi_pd_data->num_domains = num_domains;
+
+	of_genpd_add_provider_onecell(np, scmi_pd_data);
+
+	return 0;
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+	{ SCMI_PROTOCOL_POWER },
+	{ },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_power_domain_driver = {
+	.name = "scmi-power-domain",
+	.probe = scmi_pm_domain_probe,
+	.id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_power_domain_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI power domain driver");
+MODULE_LICENSE("GPL v2");

drivers/firmware/meson/meson_sm.c

@@ -17,8 +17,10 @@
 #include <linux/arm-smccc.h>
 #include <linux/bug.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/printk.h>
 #include <linux/types.h>
 #include <linux/sizes.h>
@@ -217,21 +219,11 @@ static const struct of_device_id meson_sm_ids[] = {
 	{ /* sentinel */ },
 };
 
-int __init meson_sm_init(void)
+static int __init meson_sm_probe(struct platform_device *pdev)
 {
 	const struct meson_sm_chip *chip;
-	const struct of_device_id *matched_np;
-	struct device_node *np;
 
-	np = of_find_matching_node_and_match(NULL, meson_sm_ids, &matched_np);
-	if (!np)
-		return -ENODEV;
-
-	chip = matched_np->data;
-	if (!chip) {
-		pr_err("unable to setup secure-monitor data\n");
-		goto out;
-	}
+	chip = of_match_device(meson_sm_ids, &pdev->dev)->data;
 
 	if (chip->cmd_shmem_in_base) {
 		fw.sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base,
@@ -257,4 +249,11 @@ int __init meson_sm_init(void)
 out:
 	return -EINVAL;
 }
-device_initcall(meson_sm_init);
+
+static struct platform_driver meson_sm_driver = {
+	.driver = {
+		.name = "meson-sm",
+		.of_match_table = of_match_ptr(meson_sm_ids),
+	},
+};
+module_platform_driver_probe(meson_sm_driver, meson_sm_probe);

drivers/hwmon/Kconfig

@@ -317,6 +317,18 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
+config SENSORS_ARM_SCMI
+	tristate "ARM SCMI Sensors"
+	depends on ARM_SCMI_PROTOCOL
+	depends on THERMAL || !THERMAL_OF
+	help
+	  This driver provides support for temperature, voltage, current
+	  and power sensors available on SCMI based platforms. The actual
+	  number and type of sensors exported depend on the platform.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called scmi-hwmon.
+
 config SENSORS_ARM_SCPI
 	tristate "ARM SCPI Sensors"
 	depends on ARM_SCPI_PROTOCOL

drivers/hwmon/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCMI)	+= scmi-hwmon.o
 obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ASPEED)	+= aspeed-pwm-tacho.o

drivers/memory/emif.c

@@ -127,7 +127,7 @@ static int emif_regdump_show(struct seq_file *s, void *unused)
 
 	for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
 		do_emif_regdump_show(s, emif, regs_cache[i]);
-		seq_printf(s, "\n");
+		seq_putc(s, '\n');
 	}
 
 	return 0;

drivers/memory/samsung/Kconfig

+# SPDX-License-Identifier: GPL-2.0
 config SAMSUNG_MC
 	bool "Samsung Exynos Memory Controller support" if COMPILE_TEST
 	help

drivers/memory/samsung/Makefile

+# SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_EXYNOS_SROM)	+= exynos-srom.o

drivers/memory/samsung/exynos-srom.c

-/*
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *	      http://www.samsung.com/
- *
- * EXYNOS - SROM Controller support
- * Author: Pankaj Dubey <pankaj.dubey@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2015 Samsung Electronics Co., Ltd.
+//	      http://www.samsung.com/
+//
+// EXYNOS - SROM Controller support
+// Author: Pankaj Dubey <pankaj.dubey@samsung.com>
 
 #include <linux/io.h>
 #include <linux/init.h>

drivers/memory/samsung/exynos-srom.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * Exynos SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #ifndef __EXYNOS_SROM_H
 #define __EXYNOS_SROM_H __FILE__