Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
提交 378102f3 编写于 作者: G Greg Kroah-Hartman
浏览文件
操作

Merge 4.3-rc5 into tty-next 

We want the tty fixes and reverts in here as well so that people can
properly test and use it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 1a76eb5b 25cb62b7
无相关合并请求
展开全部 隐藏空白更改
内联 并排
Showing with 3234 addition and 2011 deletion
Documentation/Changes
浏览文件 @ 378102f3
......@@ -43,7 +43,7 @@ o udev 081 # udevd --version
o grub 0.93 # grub --version || grub-install --version
o mcelog 0.6 # mcelog --version
o iptables 1.4.2 # iptables -V
o openssl & libcrypto 1.0.1k # openssl version
o openssl & libcrypto 1.0.0 # openssl version
Kernel compilation
......
Documentation/device-mapper/snapshot.txt
浏览文件 @ 378102f3
......@@ -41,9 +41,13 @@ useless and be disabled, returning errors. So it is important to monitor
the amount of free space and expand the <COW device> before it fills up.
<persistent?> is P (Persistent) or N (Not persistent - will not survive
after reboot).
The difference is that for transient snapshots less metadata must be
saved on disk - they can be kept in memory by the kernel.
after reboot). O (Overflow) can be added as a persistent store option
to allow userspace to advertise its support for seeing "Overflow" in the
snapshot status. So supported store types are "P", "PO" and "N".
The difference between persistent and transient is with transient
snapshots less metadata must be saved on disk - they can be kept in
memory by the kernel.
* snapshot-merge <origin> <COW device> <persistent> <chunksize>
......
Documentation/devicetree/bindings/input/cypress,cyapa.txt
浏览文件 @ 378102f3
......@@ -25,7 +25,7 @@ Example:
/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
reg = <0x24>;
reg = <0x67>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;
......
Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
浏览文件 @ 378102f3
......@@ -4,8 +4,8 @@ The MISC interrupt controller is a secondary controller for lower priority
interrupt.
Required Properties:
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
as fallback
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
"qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
- reg: Base address and size of the controllers memory area
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
......@@ -13,6 +13,9 @@ Required Properties:
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
source, should be 1
Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
use ar7240 for all other SoCs.
Please refer to interrupts.txt in this directory for details of the common
Interrupt Controllers bindings used by client devices.
......@@ -28,3 +31,16 @@ Example:
interrupt-controller;
#interrupt-cells = <1>;
};
Another example:
interrupt-controller@18060010 {
compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
reg = <0x18060010 0x4>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <1>;
};
Documentation/devicetree/bindings/spi/sh-msiof.txt
浏览文件 @ 378102f3
......@@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings:
- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
(default is 64)
- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
(default is 64, or 256 on R-Car Gen2)
(default is 64)
Pinctrl properties might be needed, too. See
Documentation/devicetree/bindings/pinctrl/renesas,*.
......
Documentation/devicetree/bindings/usb/renesas_usbhs.txt
浏览文件 @ 378102f3
......@@ -5,6 +5,7 @@ Required properties:
- "renesas,usbhs-r8a7790"
- "renesas,usbhs-r8a7791"
- "renesas,usbhs-r8a7794"
- "renesas,usbhs-r8a7795"
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- clocks: A list of phandle + clock specifier pairs
......
Documentation/input/multi-touch-protocol.txt
浏览文件 @ 378102f3
......@@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is
ABS_MT_POSITION_X := T_X
ABS_MT_POSITION_Y := T_Y
ABS_MT_TOOL_X := C_X
ABS_MT_TOOL_X := C_Y
ABS_MT_TOOL_Y := C_Y
Unfortunately, there is not enough information to specify both the touching
ellipse and the tool ellipse, so one has to resort to approximations. One
......
Documentation/power/pci.txt
浏览文件 @ 378102f3
......@@ -979,20 +979,45 @@ every time right after the runtime_resume() callback has returned
(alternatively, the runtime_suspend() callback will have to check if the
device should really be suspended and return -EAGAIN if that is not the case).
The runtime PM of PCI devices is disabled by default. It is also blocked by
pci_pm_init() that runs the pm_runtime_forbid() helper function. If a PCI
driver implements the runtime PM callbacks and intends to use the runtime PM
framework provided by the PM core and the PCI subsystem, it should enable this
feature by executing the pm_runtime_enable() helper function. However, the
driver should not call the pm_runtime_allow() helper function unblocking
the runtime PM of the device. Instead, it should allow user space or some
platform-specific code to do that (user space can do it via sysfs), although
once it has called pm_runtime_enable(), it must be prepared to handle the
The runtime PM of PCI devices is enabled by default by the PCI core. PCI
device drivers do not need to enable it and should not attempt to do so.
However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
helper function. In addition to that, the runtime PM usage counter of
each PCI device is incremented by local_pci_probe() before executing the
probe callback provided by the device's driver.
If a PCI driver implements the runtime PM callbacks and intends to use the
runtime PM framework provided by the PM core and the PCI subsystem, it needs
to decrement the device's runtime PM usage counter in its probe callback
function. If it doesn't do that, the counter will always be different from
zero for the device and it will never be runtime-suspended. The simplest
way to do that is by calling pm_runtime_put_noidle(), but if the driver
wants to schedule an autosuspend right away, for example, it may call
pm_runtime_put_autosuspend() instead for this purpose. Generally, it
just needs to call a function that decrements the devices usage counter
from its probe routine to make runtime PM work for the device.
It is important to remember that the driver's runtime_suspend() callback
may be executed right after the usage counter has been decremented, because
user space may already have cuased the pm_runtime_allow() helper function
unblocking the runtime PM of the device to run via sysfs, so the driver must
be prepared to cope with that.
The driver itself should not call pm_runtime_allow(), though. Instead, it
should let user space or some platform-specific code do that (user space can
do it via sysfs as stated above), but it must be prepared to handle the
runtime PM of the device correctly as soon as pm_runtime_allow() is called
(which may happen at any time). [It also is possible that user space causes
pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
fact the driver has to be prepared to handle the runtime PM of the device as
soon as it calls pm_runtime_enable().]
(which may happen at any time, even before the driver is loaded).
When the driver's remove callback runs, it has to balance the decrementation
of the device's runtime PM usage counter at the probe time. For this reason,
if it has decremented the counter in its probe callback, it must run
pm_runtime_get_noresume() in its remove callback. [Since the core carries
out a runtime resume of the device and bumps up the device's usage counter
before running the driver's remove callback, the runtime PM of the device
is effectively disabled for the duration of the remove execution and all
runtime PM helper functions incrementing the device's usage counter are
then effectively equivalent to pm_runtime_get_noresume().]
The runtime PM framework works by processing requests to suspend or resume
devices, or to check if they are idle (in which cases it is reasonable to
......
Documentation/ptp/testptp.c
浏览文件 @ 378102f3
......@@ -18,6 +18,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define _GNU_SOURCE
#define __SANE_USERSPACE_TYPES__ /* For PPC64, to get LL64 types */
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
......
MAINTAINERS
浏览文件 @ 378102f3
......@@ -4003,7 +4003,7 @@ S: Maintained
F: sound/usb/misc/ua101.c
EXTENSIBLE FIRMWARE INTERFACE (EFI)
M: Matt Fleming <matt.fleming@intel.com>
M: Matt Fleming <matt@codeblueprint.co.uk>
L: linux-efi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
S: Maintained
......@@ -4018,7 +4018,7 @@ F: include/linux/efi*.h
EFI VARIABLE FILESYSTEM
M: Matthew Garrett <matthew.garrett@nebula.com>
M: Jeremy Kerr <jk@ozlabs.org>
M: Matt Fleming <matt.fleming@intel.com>
M: Matt Fleming <matt@codeblueprint.co.uk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
L: linux-efi@vger.kernel.org
S: Maintained
......@@ -5957,7 +5957,7 @@ F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
M: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
W: http://www.linux-kvm.org/
S: Maintained
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
......@@ -5965,7 +5965,7 @@ F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
S: Supported
F: arch/powerpc/include/asm/kvm*
......@@ -9914,7 +9914,6 @@ S: Maintained
F: drivers/staging/lustre
STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
M: Julian Andres Klode <jak@jak-linux.org>
M: Marc Dietrich <marvin24@gmx.de>
L: ac100@lists.launchpad.net (moderated for non-subscribers)
L: linux-tegra@vger.kernel.org
......@@ -11378,15 +11377,6 @@ W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
M: Mark Brown <broonie@kernel.org>
M: Liam Girdwood <lrg@slimlogic.co.uk>
L: linux-input@vger.kernel.org
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
T: git https://github.com/CirrusLogic/linux-drivers.git
......
Makefile
浏览文件 @ 378102f3
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
EXTRAVERSION = -rc5
NAME = Blurry Fish Butt
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
......
arch/alpha/include/asm/word-at-a-time.h
浏览文件 @ 378102f3
......@@ -52,4 +52,6 @@ static inline unsigned long find_zero(unsigned long bits)
#endif
}
#define zero_bytemask(mask) ((2ul << (find_zero(mask) * 8)) - 1)
#endif /* _ASM_WORD_AT_A_TIME_H */
arch/arc/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -48,4 +48,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/arm/boot/dts/Makefile
浏览文件 @ 378102f3
......@@ -578,7 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-itead-iteaduino-plus.dts \
sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
......
arch/arm/boot/dts/exynos4412.dtsi
浏览文件 @ 378102f3
......@@ -98,6 +98,7 @@
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
opp-suspend;
};
opp07 {
opp-hz = /bits/ 64 <900000000>;
......
arch/arm/boot/dts/exynos5250-smdk5250.dts
浏览文件 @ 378102f3
......@@ -197,6 +197,7 @@
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
......
arch/arm/boot/dts/exynos5420.dtsi
浏览文件 @ 378102f3
......@@ -1117,7 +1117,7 @@
interrupt-parent = <&combiner>;
interrupts = <3 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
power-domains = <&disp_pd>;
#iommu-cells = <0>;
};
......
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
浏览文件 @ 378102f3
......@@ -472,7 +472,6 @@
*/
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
pinctrl-names = "default";
samsung,pwm-outputs = <0>;
status = "okay";
};
......
arch/arm/boot/dts/imx53-qsrb.dts
浏览文件 @ 378102f3
......@@ -36,7 +36,7 @@
pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <23 0x8>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
regulators {
sw1_reg: sw1a {
regulator-name = "SW1";
......
arch/arm/boot/dts/imx53.dtsi
浏览文件 @ 378102f3
......@@ -15,6 +15,7 @@
#include <dt-bindings/clock/imx5-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
......
arch/arm/boot/dts/imx6qdl-rex.dtsi
浏览文件 @ 378102f3
......@@ -35,7 +35,6 @@
compatible = "regulator-fixed";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
......@@ -47,7 +46,6 @@
compatible = "regulator-fixed";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
......
arch/arm/boot/dts/r8a7790.dtsi
浏览文件 @ 378102f3
......@@ -1627,6 +1627,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&cpg_clocks>;
status = "disabled";
......
arch/arm/boot/dts/r8a7791.dtsi
浏览文件 @ 378102f3
......@@ -1677,6 +1677,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&cpg_clocks>;
status = "disabled";
......
arch/arm/boot/dts/sun7i-a20.dtsi
浏览文件 @ 378102f3
......@@ -107,7 +107,7 @@
720000 1200000
528000 1100000
312000 1000000
144000 900000
144000 1000000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
......
arch/arm/mach-exynos/mcpm-exynos.c
浏览文件 @ 378102f3
......@@ -20,6 +20,7 @@
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <asm/mcpm.h>
#include <asm/smp_plat.h>
#include "regs-pmu.h"
#include "common.h"
......@@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
cluster >= EXYNOS5420_NR_CLUSTERS)
return -EINVAL;
exynos_cpu_power_up(cpunr);
if (!exynos_cpu_power_state(cpunr)) {
exynos_cpu_power_up(cpunr);
/*
* This assumes the cluster number of the big cores(Cortex A15)
* is 0 and the Little cores(Cortex A7) is 1.
* When the system was booted from the Little core,
* they should be reset during power up cpu.
*/
if (cluster &&
cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
/*
* Before we reset the Little cores, we should wait
* the SPARE2 register is set to 1 because the init
* codes of the iROM will set the register after
* initialization.
*/
while (!pmu_raw_readl(S5P_PMU_SPARE2))
udelay(10);
pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
EXYNOS_SWRESET);
}
}
return 0;
}
......
arch/arm/mach-exynos/regs-pmu.h
浏览文件 @ 378102f3
......@@ -513,6 +513,12 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
#define SPREAD_ENABLE 0xF
#define SPREAD_USE_STANDWFI 0xF
#define EXYNOS5420_KFC_CORE_RESET0 BIT(8)
#define EXYNOS5420_KFC_ETM_RESET0 BIT(20)
#define EXYNOS5420_KFC_CORE_RESET(_nr) \
((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
#define EXYNOS5420_BB_CON1 0x0784
#define EXYNOS5420_BB_SEL_EN BIT(31)
#define EXYNOS5420_BB_PMOS_EN BIT(7)
......
arch/arm64/include/asm/pgtable.h
浏览文件 @ 378102f3
......@@ -79,7 +79,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
#define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
#define PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
......@@ -496,7 +496,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
/* preserve the hardware dirty information */
if (pte_hw_dirty(pte))
pte = pte_mkdirty(pte);
......
arch/arm64/kernel/debug-monitors.c
浏览文件 @ 378102f3
......@@ -201,7 +201,7 @@ void unregister_step_hook(struct step_hook *hook)
}
/*
* Call registered single step handers
* Call registered single step handlers
* There is no Syndrome info to check for determining the handler.
* So we call all the registered handlers, until the right handler is
* found which returns zero.
......@@ -271,20 +271,21 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
* Use reader/writer locks instead of plain spinlock.
*/
static LIST_HEAD(break_hook);
static DEFINE_RWLOCK(break_hook_lock);
static DEFINE_SPINLOCK(break_hook_lock);
void register_break_hook(struct break_hook *hook)
{
write_lock(&break_hook_lock);
list_add(&hook->node, &break_hook);
write_unlock(&break_hook_lock);
spin_lock(&break_hook_lock);
list_add_rcu(&hook->node, &break_hook);
spin_unlock(&break_hook_lock);
}
void unregister_break_hook(struct break_hook *hook)
{
write_lock(&break_hook_lock);
list_del(&hook->node);
write_unlock(&break_hook_lock);
spin_lock(&break_hook_lock);
list_del_rcu(&hook->node);
spin_unlock(&break_hook_lock);
synchronize_rcu();
}
static int call_break_hook(struct pt_regs *regs, unsigned int esr)
......@@ -292,11 +293,11 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
struct break_hook *hook;
int (*fn)(struct pt_regs *regs, unsigned int esr) = NULL;
read_lock(&break_hook_lock);
list_for_each_entry(hook, &break_hook, node)
rcu_read_lock();
list_for_each_entry_rcu(hook, &break_hook, node)
if ((esr & hook->esr_mask) == hook->esr_val)
fn = hook->fn;
read_unlock(&break_hook_lock);
rcu_read_unlock();
return fn ? fn(regs, esr) : DBG_HOOK_ERROR;
}
......
arch/arm64/kernel/efi.c
浏览文件 @ 378102f3
......@@ -258,7 +258,8 @@ static bool __init efi_virtmap_init(void)
*/
if (!is_normal_ram(md))
prot = __pgprot(PROT_DEVICE_nGnRE);
else if (md->type == EFI_RUNTIME_SERVICES_CODE)
else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
!PAGE_ALIGNED(md->phys_addr))
prot = PAGE_KERNEL_EXEC;
else
prot = PAGE_KERNEL;
......
arch/arm64/kernel/entry-ftrace.S
浏览文件 @ 378102f3
......@@ -178,6 +178,24 @@ ENTRY(ftrace_stub)
ENDPROC(ftrace_stub)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* save return value regs*/
.macro save_return_regs
sub sp, sp, #64
stp x0, x1, [sp]
stp x2, x3, [sp, #16]
stp x4, x5, [sp, #32]
stp x6, x7, [sp, #48]
.endm
/* restore return value regs*/
.macro restore_return_regs
ldp x0, x1, [sp]
ldp x2, x3, [sp, #16]
ldp x4, x5, [sp, #32]
ldp x6, x7, [sp, #48]
add sp, sp, #64
.endm
/*
* void ftrace_graph_caller(void)
*
......@@ -204,11 +222,11 @@ ENDPROC(ftrace_graph_caller)
* only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
*/
ENTRY(return_to_handler)
str x0, [sp, #-16]!
save_return_regs
mov x0, x29 // parent's fp
bl ftrace_return_to_handler// addr = ftrace_return_to_hander(fp);
mov x30, x0 // restore the original return address
ldr x0, [sp], #16
restore_return_regs
ret
END(return_to_handler)
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
arch/arm64/kernel/insn.c
浏览文件 @ 378102f3
......@@ -85,7 +85,7 @@ bool aarch64_insn_is_branch_imm(u32 insn)
aarch64_insn_is_bcond(insn));
}
static DEFINE_SPINLOCK(patch_lock);
static DEFINE_RAW_SPINLOCK(patch_lock);
static void __kprobes *patch_map(void *addr, int fixmap)
{
......@@ -131,13 +131,13 @@ static int __kprobes __aarch64_insn_write(void *addr, u32 insn)
unsigned long flags = 0;
int ret;
spin_lock_irqsave(&patch_lock, flags);
raw_spin_lock_irqsave(&patch_lock, flags);
waddr = patch_map(addr, FIX_TEXT_POKE0);
ret = probe_kernel_write(waddr, &insn, AARCH64_INSN_SIZE);
patch_unmap(FIX_TEXT_POKE0);
spin_unlock_irqrestore(&patch_lock, flags);
raw_spin_unlock_irqrestore(&patch_lock, flags);
return ret;
}
......
arch/arm64/kernel/setup.c
浏览文件 @ 378102f3
......@@ -364,6 +364,8 @@ static void __init relocate_initrd(void)
to_free = ram_end - orig_start;
size = orig_end - orig_start;
if (!size)
return;
/* initrd needs to be relocated completely inside linear mapping */
new_start = memblock_find_in_range(0, PFN_PHYS(max_pfn),
......
arch/arm64/mm/fault.c
浏览文件 @ 378102f3
......@@ -287,6 +287,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
* starvation.
*/
mm_flags &= ~FAULT_FLAG_ALLOW_RETRY;
mm_flags |= FAULT_FLAG_TRIED;
goto retry;
}
}
......
arch/avr32/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -20,4 +20,5 @@ generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/blackfin/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -46,4 +46,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/c6x/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -59,4 +59,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/cris/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -43,4 +43,5 @@ generic-y += topology.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/frv/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
arch/h8300/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -73,4 +73,5 @@ generic-y += uaccess.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/hexagon/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -58,4 +58,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/ia64/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -8,3 +8,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += vtime.h
generic-y += word-at-a-time.h
arch/m32r/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -9,3 +9,4 @@ generic-y += module.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
arch/m68k/configs/amiga_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -57,7 +58,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -67,10 +67,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -179,6 +181,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -206,6 +209,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -370,6 +375,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -537,6 +543,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/apollo_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -344,6 +349,7 @@ CONFIG_VETH=m
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -495,6 +501,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/atari_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -355,6 +360,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -517,6 +523,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/bvme6000_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -343,6 +348,7 @@ CONFIG_BVME6000_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/hp300_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -345,6 +350,7 @@ CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -497,6 +503,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/mac_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -54,7 +55,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -64,10 +64,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -176,6 +178,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -203,6 +206,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -364,6 +369,7 @@ CONFIG_MAC8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -519,6 +525,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/multi_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -64,7 +65,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -74,10 +74,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -186,6 +188,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -213,6 +216,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -281,6 +285,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -410,6 +415,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
......@@ -599,6 +605,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/mvme147_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -52,7 +53,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -62,10 +62,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -174,6 +176,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -201,6 +204,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -266,6 +270,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -343,6 +348,7 @@ CONFIG_MVME147_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/mvme16x_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -343,6 +348,7 @@ CONFIG_MVME16x_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/q40_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -354,6 +359,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
......@@ -510,6 +516,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/configs/sun3_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -341,6 +346,7 @@ CONFIG_SUN3_82586=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
......
arch/m68k/configs/sun3x_defconfig
浏览文件 @ 378102f3
......@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
......@@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
......@@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
......@@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
......@@ -341,6 +346,7 @@ CONFIG_SUN3LANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
......@@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
......
arch/m68k/include/asm/linkage.h
浏览文件 @ 378102f3
......@@ -4,4 +4,34 @@
#define __ALIGN .align 4
#define __ALIGN_STR ".align 4"
/*
* Make sure the compiler doesn't do anything stupid with the
* arguments on the stack - they are owned by the *caller*, not
* the callee. This just fools gcc into not spilling into them,
* and keeps it from doing tailcall recursion and/or using the
* stack slots for temporaries, since they are live and "used"
* all the way to the end of the function.
*/
#define asmlinkage_protect(n, ret, args...) \
__asmlinkage_protect##n(ret, ##args)
#define __asmlinkage_protect_n(ret, args...) \
__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
#define __asmlinkage_protect0(ret) \
__asmlinkage_protect_n(ret)
#define __asmlinkage_protect1(ret, arg1) \
__asmlinkage_protect_n(ret, "m" (arg1))
#define __asmlinkage_protect2(ret, arg1, arg2) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2))
#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3))
#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4))
#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5))
#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5), "m" (arg6))
#endif
arch/m68k/include/asm/unistd.h
浏览文件 @ 378102f3
......@@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 356
#define NR_syscalls 375
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
......
arch/m68k/include/uapi/asm/unistd.h
浏览文件 @ 378102f3
......@@ -361,5 +361,24 @@
#define __NR_memfd_create 353
#define __NR_bpf 354
#define __NR_execveat 355
#define __NR_socket 356
#define __NR_socketpair 357
#define __NR_bind 358
#define __NR_connect 359
#define __NR_listen 360
#define __NR_accept4 361
#define __NR_getsockopt 362
#define __NR_setsockopt 363
#define __NR_getsockname 364
#define __NR_getpeername 365
#define __NR_sendto 366
#define __NR_sendmsg 367
#define __NR_recvfrom 368
#define __NR_recvmsg 369
#define __NR_shutdown 370
#define __NR_recvmmsg 371
#define __NR_sendmmsg 372
#define __NR_userfaultfd 373
#define __NR_membarrier 374
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
arch/m68k/kernel/syscalltable.S
浏览文件 @ 378102f3
......@@ -376,4 +376,22 @@ ENTRY(sys_call_table)
.long sys_memfd_create
.long sys_bpf
.long sys_execveat /* 355 */
.long sys_socket
.long sys_socketpair
.long sys_bind
.long sys_connect
.long sys_listen /* 360 */
.long sys_accept4
.long sys_getsockopt
.long sys_setsockopt
.long sys_getsockname
.long sys_getpeername /* 365 */
.long sys_sendto
.long sys_sendmsg
.long sys_recvfrom
.long sys_recvmsg
.long sys_shutdown /* 370 */
.long sys_recvmmsg
.long sys_sendmmsg
.long sys_userfaultfd
.long sys_membarrier
arch/metag/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -54,4 +54,5 @@ generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/microblaze/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -10,3 +10,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += syscalls.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
arch/mips/ath79/irq.c
浏览文件 @ 378102f3
......@@ -293,8 +293,26 @@ static int __init ath79_misc_intc_of_init(
return 0;
}
IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
ath79_misc_intc_of_init);
static int __init ar7100_misc_intc_of_init(
struct device_node *node, struct device_node *parent)
{
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
return ath79_misc_intc_of_init(node, parent);
}
IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
ar7100_misc_intc_of_init);
static int __init ar7240_misc_intc_of_init(
struct device_node *node, struct device_node *parent)
{
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
return ath79_misc_intc_of_init(node, parent);
}
IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
ar7240_misc_intc_of_init);
static int __init ar79_cpu_intc_of_init(
struct device_node *node, struct device_node *parent)
......
arch/mips/cavium-octeon/setup.c
浏览文件 @ 378102f3
......@@ -933,7 +933,7 @@ void __init plat_mem_setup(void)
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
&& (total < MAX_MEMORY)) {
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&__init_end), -1,
__pa_symbol(&_end), -1,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
if (memory >= 0) {
......
arch/mips/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -17,4 +17,5 @@ generic-y += segment.h
generic-y += serial.h
generic-y += trace_clock.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/mips/include/asm/cpu-features.h
浏览文件 @ 378102f3
......@@ -20,6 +20,9 @@
#ifndef cpu_has_tlb
#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB)
#endif
#ifndef cpu_has_ftlb
#define cpu_has_ftlb (cpu_data[0].options & MIPS_CPU_FTLB)
#endif
#ifndef cpu_has_tlbinv
#define cpu_has_tlbinv (cpu_data[0].options & MIPS_CPU_TLBINV)
#endif
......
arch/mips/include/asm/cpu.h
浏览文件 @ 378102f3
......@@ -385,6 +385,7 @@ enum cpu_type_enum {
#define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */
#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
#define MIPS_CPU_SP 0x10000000000ull /* Small (1KB) page support */
#define MIPS_CPU_FTLB 0x20000000000ull /* CPU has Fixed-page-size TLB */
/*
* CPU ASE encodings
......
arch/mips/include/asm/io.h
浏览文件 @ 378102f3
......@@ -256,6 +256,7 @@ static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long si
*/
#define ioremap_nocache(offset, size) \
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
#define ioremap_uc ioremap_nocache
/*
* ioremap_cachable - map bus memory into CPU space
......
arch/mips/include/asm/maar.h
浏览文件 @ 378102f3
......@@ -65,6 +65,15 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
back_to_back_c0_hazard();
}
/**
* maar_init() - initialise MAARs
*
* Performs initialisation of MAARs for the current CPU, making use of the
* platforms implementation of platform_maar_init where necessary and
* duplicating the setup it provides on secondary CPUs.
*/
extern void maar_init(void);
/**
* struct maar_config - MAAR configuration data
* @lower: The lowest address that the MAAR pair will affect. Must be
......
arch/mips/include/asm/mips-cm.h
浏览文件 @ 378102f3
......@@ -194,6 +194,7 @@ BUILD_CM_RW(reg3_mask, MIPS_CM_GCB_OFS + 0xc8)
BUILD_CM_R_(gic_status, MIPS_CM_GCB_OFS + 0xd0)
BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0)
BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130)
BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150)
/* Core Local & Core Other register accessor functions */
BUILD_CM_Cx_RW(reset_release, 0x00)
......@@ -316,6 +317,10 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
#define CM_GCR_L2_CONFIG_ASSOC_SHF 0
#define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0)
/* GCR_SYS_CONFIG2 register fields */
#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0
#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0)
/* GCR_Cx_COHERENCE register fields */
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
......@@ -405,4 +410,38 @@ static inline int mips_cm_revision(void)
return read_gcr_rev();
}
/**
* mips_cm_max_vp_width() - return the width in bits of VP indices
*
* Return: the width, in bits, of VP indices in fields that combine core & VP
* indices.
*/
static inline unsigned int mips_cm_max_vp_width(void)
{
extern int smp_num_siblings;
if (mips_cm_revision() >= CM_REV_CM3)
return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
return smp_num_siblings;
}
/**
* mips_cm_vp_id() - calculate the hardware VP ID for a CPU
* @cpu: the CPU whose VP ID to calculate
*
* Hardware such as the GIC uses identifiers for VPs which may not match the
* CPU numbers used by Linux. This function calculates the hardware VP
* identifier corresponding to a given CPU.
*
* Return: the VP ID for the CPU.
*/
static inline unsigned int mips_cm_vp_id(unsigned int cpu)
{
unsigned int core = cpu_data[cpu].core;
unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);
return (core * mips_cm_max_vp_width()) + vp;
}
#endif /* __MIPS_ASM_MIPS_CM_H__ */
arch/mips/include/asm/mipsregs.h
浏览文件 @ 378102f3
......@@ -487,6 +487,8 @@
/* Bits specific to the MIPS32/64 PRA. */
#define MIPS_CONF_MT (_ULCAST_(7) << 7)
#define MIPS_CONF_MT_TLB (_ULCAST_(1) << 7)
#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
......
arch/mips/include/uapi/asm/swab.h
浏览文件 @ 378102f3
......@@ -13,16 +13,15 @@
#define __SWAB_64_THRU_32__
#if (defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
defined(_MIPS_ARCH_LOONGSON3A)
#if !defined(__mips16) && \
((defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
defined(_MIPS_ARCH_LOONGSON3A))
static inline __attribute__((nomips16)) __attribute_const__
__u16 __arch_swab16(__u16 x)
static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
" .set push \n"
" .set arch=mips32r2 \n"
" .set nomips16 \n"
" wsbh %0, %1 \n"
" .set pop \n"
: "=r" (x)
......@@ -32,13 +31,11 @@ static inline __attribute__((nomips16)) __attribute_const__
}
#define __arch_swab16 __arch_swab16
static inline __attribute__((nomips16)) __attribute_const__
__u32 __arch_swab32(__u32 x)
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
" .set push \n"
" .set arch=mips32r2 \n"
" .set nomips16 \n"
" wsbh %0, %1 \n"
" rotr %0, %0, 16 \n"
" .set pop \n"
......@@ -54,13 +51,11 @@ static inline __attribute__((nomips16)) __attribute_const__
* 64-bit kernel on r2 CPUs.
*/
#ifdef __mips64
static inline __attribute__((nomips16)) __attribute_const__
__u64 __arch_swab64(__u64 x)
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
" .set push \n"
" .set arch=mips64r2 \n"
" .set nomips16 \n"
" dsbh %0, %1 \n"
" dshd %0, %0 \n"
" .set pop \n"
......@@ -71,5 +66,5 @@ static inline __attribute__((nomips16)) __attribute_const__
}
#define __arch_swab64 __arch_swab64
#endif /* __mips64 */
#endif /* MIPS R2 or newer or Loongson 3A */
#endif /* (not __mips16) and (MIPS R2 or newer or Loongson 3A) */
#endif /* _ASM_SWAB_H */
arch/mips/include/uapi/asm/unistd.h
浏览文件 @ 378102f3
......@@ -377,16 +377,18 @@
#define __NR_memfd_create (__NR_Linux + 354)
#define __NR_bpf (__NR_Linux + 355)
#define __NR_execveat (__NR_Linux + 356)
#define __NR_userfaultfd (__NR_Linux + 357)
#define __NR_membarrier (__NR_Linux + 358)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 356
#define __NR_Linux_syscalls 358
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 356
#define __NR_O32_Linux_syscalls 358
#if _MIPS_SIM == _MIPS_SIM_ABI64
......@@ -711,16 +713,18 @@
#define __NR_memfd_create (__NR_Linux + 314)
#define __NR_bpf (__NR_Linux + 315)
#define __NR_execveat (__NR_Linux + 316)
#define __NR_userfaultfd (__NR_Linux + 317)
#define __NR_membarrier (__NR_Linux + 318)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 316
#define __NR_Linux_syscalls 318
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 316
#define __NR_64_Linux_syscalls 318
#if _MIPS_SIM == _MIPS_SIM_NABI32
......@@ -1049,15 +1053,17 @@
#define __NR_memfd_create (__NR_Linux + 318)
#define __NR_bpf (__NR_Linux + 319)
#define __NR_execveat (__NR_Linux + 320)
#define __NR_userfaultfd (__NR_Linux + 321)
#define __NR_membarrier (__NR_Linux + 322)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 320
#define __NR_Linux_syscalls 322
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 320
#define __NR_N32_Linux_syscalls 322
#endif /* _UAPI_ASM_UNISTD_H */
arch/mips/jz4740/board-qi_lb60.c
浏览文件 @ 378102f3
......@@ -26,6 +26,7 @@
#include <linux/power/jz4740-battery.h>
#include <linux/power/gpio-charger.h>
#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <asm/mach-jz4740/jz4740_mmc.h>
#include <asm/mach-jz4740/jz4740_nand.h>
......
arch/mips/jz4740/gpio.c
浏览文件 @ 378102f3
......@@ -28,6 +28,7 @@
#include <linux/seq_file.h>
#include <asm/mach-jz4740/base.h>
#include <asm/mach-jz4740/gpio.h>
#define JZ4740_GPIO_BASE_A (32*0)
#define JZ4740_GPIO_BASE_B (32*1)
......
arch/mips/kernel/cps-vec.S
浏览文件 @ 378102f3
......@@ -39,6 +39,7 @@
mfc0 \dest, CP0_CONFIG, 3
andi \dest, \dest, MIPS_CONF3_MT
beqz \dest, \nomt
nop
.endm
.section .text.cps-vec
......@@ -223,10 +224,9 @@ LEAF(excep_ejtag)
END(excep_ejtag)
LEAF(mips_cps_core_init)
#ifdef CONFIG_MIPS_MT
#ifdef CONFIG_MIPS_MT_SMP
/* Check that the core implements the MT ASE */
has_mt t0, 3f
nop
.set push
.set mips64r2
......@@ -310,8 +310,9 @@ LEAF(mips_cps_boot_vpes)
PTR_ADDU t0, t0, t1
/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
li t9, 0
#ifdef CONFIG_MIPS_MT_SMP
has_mt ta2, 1f
li t9, 0
/* Find the number of VPEs present in the core */
mfc0 t1, CP0_MVPCONF0
......@@ -330,6 +331,7 @@ LEAF(mips_cps_boot_vpes)
/* Retrieve the VPE ID from EBase.CPUNum */
mfc0 t9, $15, 1
and t9, t9, t1
#endif
1: /* Calculate a pointer to this VPEs struct vpe_boot_config */
li t1, VPEBOOTCFG_SIZE
......@@ -337,7 +339,7 @@ LEAF(mips_cps_boot_vpes)
PTR_L ta3, COREBOOTCFG_VPECONFIG(t0)
PTR_ADDU v0, v0, ta3
#ifdef CONFIG_MIPS_MT
#ifdef CONFIG_MIPS_MT_SMP
/* If the core doesn't support MT then return */
bnez ta2, 1f
......@@ -451,7 +453,7 @@ LEAF(mips_cps_boot_vpes)
2: .set pop
#endif /* CONFIG_MIPS_MT */
#endif /* CONFIG_MIPS_MT_SMP */
/* Return */
jr ra
......
arch/mips/kernel/cpu-probe.c
浏览文件 @ 378102f3
......@@ -410,16 +410,18 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, int enable)
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
int isa;
int isa, mt;
config0 = read_c0_config();
/*
* Look for Standard TLB or Dual VTLB and FTLB
*/
if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
(((config0 & MIPS_CONF_MT) >> 7) == 4))
mt = config0 & MIPS_CONF_MT;
if (mt == MIPS_CONF_MT_TLB)
c->options |= MIPS_CPU_TLB;
else if (mt == MIPS_CONF_MT_FTLB)
c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
......@@ -559,15 +561,18 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
if (cpu_has_tlb) {
if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
c->options |= MIPS_CPU_TLBINV;
/*
* This is a bit ugly. R6 has dropped that field from
* config4 and the only valid configuration is VTLB+FTLB so
* set a good value for mmuextdef for that case.
* R6 has dropped the MMUExtDef field from config4.
* On R6 the fields always describe the FTLB, and only if it is
* present according to Config.MT.
*/
if (cpu_has_mips_r6)
if (!cpu_has_mips_r6)
mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
else if (cpu_has_ftlb)
mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
else
mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
mmuextdef = 0;
switch (mmuextdef) {
case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
......
arch/mips/kernel/octeon_switch.S
浏览文件 @ 378102f3
......@@ -18,7 +18,7 @@
.set pop
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti, int usedfpu)
* struct thread_info *next_ti)
*/
.align 7
LEAF(resume)
......@@ -28,30 +28,6 @@
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
/*
* check if we need to save FPU registers
*/
.set push
.set noreorder
beqz a3, 1f
PTR_L t3, TASK_THREAD_INFO(a0)
.set pop
/*
* clear saved user stack CU1 bit
*/
LONG_L t0, ST_OFF(t3)
li t1, ~ST0_CU1
and t0, t0, t1
LONG_S t0, ST_OFF(t3)
.set push
.set arch=mips64r2
fpu_save_double a0 t0 t1 # c0_status passed in t0
# clobbers t1
.set pop
1:
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
/* Check if we need to store CVMSEG state */
dmfc0 t0, $11,7 /* CvmMemCtl */
......
arch/mips/kernel/r2300_switch.S
浏览文件 @ 378102f3
......@@ -30,19 +30,9 @@
*/
#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
/*
* FPU context is saved iff the process has used it's FPU in the current
* time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user
* space STATUS register should be 0, so that a process *always* starts its
* userland with FPU disabled after each context switch.
*
* FPU will be enabled as soon as the process accesses FPU again, through
* do_cpu() trap.
*/
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti, int usedfpu)
* struct thread_info *next_ti)
*/
LEAF(resume)
mfc0 t1, CP0_STATUS
......@@ -50,22 +40,6 @@ LEAF(resume)
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
beqz a3, 1f
PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
*/
lw t0, ST_OFF(t3)
li t1, ~ST0_CU1
and t0, t0, t1
sw t0, ST_OFF(t3)
fpu_save_single a0, t0 # clobbers t0
1:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
PTR_LA t8, __stack_chk_guard
LONG_L t9, TASK_STACK_CANARY(a1)
......
arch/mips/kernel/scall32-o32.S
浏览文件 @ 378102f3
......@@ -36,16 +36,8 @@ NESTED(handle_sys, PT_SIZE, sp)
lw t1, PT_EPC(sp) # skip syscall on return
subu v0, v0, __NR_O32_Linux # check syscall number
sltiu t0, v0, __NR_O32_Linux_syscalls + 1
addiu t1, 4 # skip to next instruction
sw t1, PT_EPC(sp)
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
sw a3, PT_R26(sp) # save a3 for syscall restarting
......@@ -96,6 +88,16 @@ loads_done:
li t1, _TIF_WORK_SYSCALL_ENTRY
and t0, t1
bnez t0, syscall_trace_entry # -> yes
syscall_common:
sltiu t0, v0, __NR_O32_Linux_syscalls + 1
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
......@@ -116,7 +118,7 @@ o32_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move s0, t2
move s0, v0
move a0, sp
/*
......@@ -129,27 +131,18 @@ syscall_trace_entry:
1: jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move v0, s0 # restore syscall
move t0, s0
RESTORE_STATIC
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
jalr t0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
lw t1, PT_R2(sp) # syscall number
negu v0 # error
sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
j syscall_common
2: j syscall_exit
1: j syscall_exit
/* ------------------------------------------------------------------------ */
......@@ -599,3 +592,5 @@ EXPORT(sys_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
PTR sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
arch/mips/kernel/scall64-64.S
浏览文件 @ 378102f3
......@@ -39,18 +39,11 @@ NESTED(handle_sys64, PT_SIZE, sp)
.set at
#endif
dsubu t0, v0, __NR_64_Linux # check syscall number
sltiu t0, t0, __NR_64_Linux_syscalls + 1
#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
ld t1, PT_EPC(sp) # skip syscall on return
daddiu t1, 4 # skip to next instruction
sd t1, PT_EPC(sp)
#endif
beqz t0, illegal_syscall
dsll t0, v0, 3 # offset into table
ld t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
# syscall routine
sd a3, PT_R26(sp) # save a3 for syscall restarting
......@@ -59,6 +52,17 @@ NESTED(handle_sys64, PT_SIZE, sp)
and t0, t1, t0
bnez t0, syscall_trace_entry
syscall_common:
dsubu t2, v0, __NR_64_Linux
sltiu t0, t2, __NR_64_Linux_syscalls + 1
beqz t0, illegal_syscall
dsll t0, t2, 3 # offset into table
dla t2, sys_call_table
daddu t0, t2, t0
ld t2, (t0) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
......@@ -78,14 +82,14 @@ n64_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move s0, t2
move s0, v0
move a0, sp
move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move v0, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
......@@ -93,19 +97,9 @@ syscall_trace_entry:
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
jalr t0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_common
2: j syscall_exit
1: j syscall_exit
illegal_syscall:
/* This also isn't a 64-bit syscall, throw an error. */
......@@ -436,4 +430,6 @@ EXPORT(sys_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 5315 */
PTR sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
.size sys_call_table,.-sys_call_table
arch/mips/kernel/scall64-n32.S
浏览文件 @ 378102f3
......@@ -52,6 +52,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
and t0, t1, t0
bnez t0, n32_syscall_trace_entry
syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
......@@ -75,9 +76,9 @@ n32_syscall_trace_entry:
move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
......@@ -85,19 +86,9 @@ n32_syscall_trace_entry:
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
not_n32_scall:
/* This is not an n32 compatibility syscall, pass it on to
......@@ -429,4 +420,6 @@ EXPORT(sysn32_call_table)
PTR sys_memfd_create
PTR sys_bpf
PTR compat_sys_execveat /* 6320 */
PTR sys_userfaultfd
PTR sys_membarrier
.size sysn32_call_table,.-sysn32_call_table
arch/mips/kernel/scall64-o32.S
浏览文件 @ 378102f3
......@@ -87,6 +87,7 @@ loads_done:
and t0, t1, t0
bnez t0, trace_a_syscall
syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
......@@ -130,9 +131,9 @@ trace_a_syscall:
1: jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
......@@ -142,19 +143,9 @@ trace_a_syscall:
ld a5, PT_R9(sp)
ld a6, PT_R10(sp)
ld a7, PT_R11(sp) # For indirect syscalls
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
/* ------------------------------------------------------------------------ */
......@@ -584,4 +575,6 @@ EXPORT(sys32_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
PTR compat_sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
.size sys32_call_table,.-sys32_call_table
arch/mips/kernel/setup.c
浏览文件 @ 378102f3
......@@ -338,7 +338,7 @@ static void __init bootmem_init(void)
if (end <= reserved_end)
continue;
#ifdef CONFIG_BLK_DEV_INITRD
/* mapstart should be after initrd_end */
/* Skip zones before initrd and initrd itself */
if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
continue;
#endif
......@@ -371,6 +371,14 @@ static void __init bootmem_init(void)
max_low_pfn = PFN_DOWN(HIGHMEM_START);
}
#ifdef CONFIG_BLK_DEV_INITRD
/*
* mapstart should be after initrd_end
*/
if (initrd_end)
mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
#endif
/*
* Initialize the boot-time allocator with low memory only.
*/
......
arch/mips/kernel/smp.c
浏览文件 @ 378102f3
......@@ -42,6 +42,7 @@
#include <asm/mmu_context.h>
#include <asm/time.h>
#include <asm/setup.h>
#include <asm/maar.h>
cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
......@@ -157,6 +158,7 @@ asmlinkage void start_secondary(void)
mips_clockevent_init();
mp_ops->init_secondary();
cpu_report();
maar_init();
/*
* XXX parity protection should be folded in here when it's converted
......
arch/mips/loongson64/common/env.c
浏览文件 @ 378102f3
......@@ -64,6 +64,9 @@ void __init prom_init_env(void)
}
if (memsize == 0)
memsize = 256;
loongson_sysconf.nr_uarts = 1;
pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
#else
struct boot_params *boot_p;
......
arch/mips/mm/dma-default.c
浏览文件 @ 378102f3
......@@ -100,7 +100,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
else
#endif
#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
if (dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
dma_flag = __GFP_DMA;
else
#endif
......
arch/mips/mm/init.c
浏览文件 @ 378102f3
......@@ -44,6 +44,7 @@
#include <asm/pgalloc.h>
#include <asm/tlb.h>
#include <asm/fixmap.h>
#include <asm/maar.h>
/*
* We have up to 8 empty zeroed pages so we can map one of the right colour
......@@ -252,6 +253,119 @@ void __init fixrange_init(unsigned long start, unsigned long end,
#endif
}
unsigned __weak platform_maar_init(unsigned num_pairs)
{
struct maar_config cfg[BOOT_MEM_MAP_MAX];
unsigned i, num_configured, num_cfg = 0;
phys_addr_t skip;
for (i = 0; i < boot_mem_map.nr_map; i++) {
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
case BOOT_MEM_INIT_RAM:
break;
default:
continue;
}
skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
cfg[num_cfg].lower = boot_mem_map.map[i].addr;
cfg[num_cfg].lower += skip;
cfg[num_cfg].upper = cfg[num_cfg].lower;
cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
cfg[num_cfg].upper -= skip;
cfg[num_cfg].attrs = MIPS_MAAR_S;
num_cfg++;
}
num_configured = maar_config(cfg, num_cfg, num_pairs);
if (num_configured < num_cfg)
pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
num_pairs, num_cfg);
return num_configured;
}
void maar_init(void)
{
unsigned num_maars, used, i;
phys_addr_t lower, upper, attr;
static struct {
struct maar_config cfgs[3];
unsigned used;
} recorded = { { { 0 } }, 0 };
if (!cpu_has_maar)
return;
/* Detect the number of MAARs */
write_c0_maari(~0);
back_to_back_c0_hazard();
num_maars = read_c0_maari() + 1;
/* MAARs should be in pairs */
WARN_ON(num_maars % 2);
/* Set MAARs using values we recorded already */
if (recorded.used) {
used = maar_config(recorded.cfgs, recorded.used, num_maars / 2);
BUG_ON(used != recorded.used);
} else {
/* Configure the required MAARs */
used = platform_maar_init(num_maars / 2);
}
/* Disable any further MAARs */
for (i = (used * 2); i < num_maars; i++) {
write_c0_maari(i);
back_to_back_c0_hazard();
write_c0_maar(0);
back_to_back_c0_hazard();
}
if (recorded.used)
return;
pr_info("MAAR configuration:\n");
for (i = 0; i < num_maars; i += 2) {
write_c0_maari(i);
back_to_back_c0_hazard();
upper = read_c0_maar();
write_c0_maari(i + 1);
back_to_back_c0_hazard();
lower = read_c0_maar();
attr = lower & upper;
lower = (lower & MIPS_MAAR_ADDR) << 4;
upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
pr_info(" [%d]: ", i / 2);
if (!(attr & MIPS_MAAR_V)) {
pr_cont("disabled\n");
continue;
}
pr_cont("%pa-%pa", &lower, &upper);
if (attr & MIPS_MAAR_S)
pr_cont(" speculate");
pr_cont("\n");
/* Record the setup for use on secondary CPUs */
if (used <= ARRAY_SIZE(recorded.cfgs)) {
recorded.cfgs[recorded.used].lower = lower;
recorded.cfgs[recorded.used].upper = upper;
recorded.cfgs[recorded.used].attrs = attr;
recorded.used++;
}
}
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
int page_is_ram(unsigned long pagenr)
{
......@@ -334,69 +448,6 @@ static inline void mem_init_free_highmem(void)
#endif
}
unsigned __weak platform_maar_init(unsigned num_pairs)
{
struct maar_config cfg[BOOT_MEM_MAP_MAX];
unsigned i, num_configured, num_cfg = 0;
phys_addr_t skip;
for (i = 0; i < boot_mem_map.nr_map; i++) {
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
case BOOT_MEM_INIT_RAM:
break;
default:
continue;
}
skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
cfg[num_cfg].lower = boot_mem_map.map[i].addr;
cfg[num_cfg].lower += skip;
cfg[num_cfg].upper = cfg[num_cfg].lower;
cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
cfg[num_cfg].upper -= skip;
cfg[num_cfg].attrs = MIPS_MAAR_S;
num_cfg++;
}
num_configured = maar_config(cfg, num_cfg, num_pairs);
if (num_configured < num_cfg)
pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
num_pairs, num_cfg);
return num_configured;
}
static void maar_init(void)
{
unsigned num_maars, used, i;
if (!cpu_has_maar)
return;
/* Detect the number of MAARs */
write_c0_maari(~0);
back_to_back_c0_hazard();
num_maars = read_c0_maari() + 1;
/* MAARs should be in pairs */
WARN_ON(num_maars % 2);
/* Configure the required MAARs */
used = platform_maar_init(num_maars / 2);
/* Disable any further MAARs */
for (i = (used * 2); i < num_maars; i++) {
write_c0_maari(i);
back_to_back_c0_hazard();
write_c0_maar(0);
back_to_back_c0_hazard();
}
}
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
......
arch/mips/net/bpf_jit_asm.S
浏览文件 @ 378102f3
......@@ -57,15 +57,28 @@
LEAF(sk_load_word)
is_offset_negative(word)
.globl sk_load_word_positive
sk_load_word_positive:
FEXPORT(sk_load_word_positive)
is_offset_in_header(4, word)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lw $r_A, 0(t1)
.set noreorder
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
rotr $r_A, t0, 16
# else
sll t0, $r_A, 24
srl t1, $r_A, 24
srl t2, $r_A, 8
or t0, t0, t1
andi t2, t2, 0xff00
andi t1, $r_A, 0xff00
or t0, t0, t2
sll t1, t1, 8
or $r_A, t0, t1
# endif
#endif
jr $r_ra
move $r_ret, zero
......@@ -73,15 +86,24 @@ sk_load_word_positive:
LEAF(sk_load_half)
is_offset_negative(half)
.globl sk_load_half_positive
sk_load_half_positive:
FEXPORT(sk_load_half_positive)
is_offset_in_header(2, half)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lh $r_A, 0(t1)
.set noreorder
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
seh $r_A, t0
# else
sll t0, $r_A, 24
andi t1, $r_A, 0xff00
sra t0, t0, 16
srl t1, t1, 8
or $r_A, t0, t1
# endif
#endif
jr $r_ra
move $r_ret, zero
......@@ -89,8 +111,7 @@ sk_load_half_positive:
LEAF(sk_load_byte)
is_offset_negative(byte)
.globl sk_load_byte_positive
sk_load_byte_positive:
FEXPORT(sk_load_byte_positive)
is_offset_in_header(1, byte)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
......@@ -148,23 +169,47 @@ sk_load_byte_positive:
NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
bpf_slow_path_common(4)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_s0
jr $r_ra
rotr $r_A, t0, 16
#endif
# else
sll t0, $r_s0, 24
srl t1, $r_s0, 24
srl t2, $r_s0, 8
or t0, t0, t1
andi t2, t2, 0xff00
andi t1, $r_s0, 0xff00
or t0, t0, t2
sll t1, t1, 8
jr $r_ra
or $r_A, t0, t1
# endif
#else
jr $r_ra
move $r_A, $r_s0
move $r_A, $r_s0
#endif
END(bpf_slow_path_word)
NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
bpf_slow_path_common(2)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
jr $r_ra
wsbh $r_A, $r_s0
#endif
# else
sll t0, $r_s0, 8
andi t1, $r_s0, 0xff00
andi t0, t0, 0xff00
srl t1, t1, 8
jr $r_ra
or $r_A, t0, t1
# endif
#else
jr $r_ra
move $r_A, $r_s0
#endif
END(bpf_slow_path_half)
......
arch/mn10300/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -9,3 +9,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
arch/nios2/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -61,4 +61,5 @@ generic-y += types.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/powerpc/include/asm/word-at-a-time.h
浏览文件 @ 378102f3
......@@ -40,6 +40,11 @@ static inline bool has_zero(unsigned long val, unsigned long *data, const struct
return (val + c->high_bits) & ~rhs;
}
static inline unsigned long zero_bytemask(unsigned long mask)
{
return ~1ul << __fls(mask);
}
#else
#ifdef CONFIG_64BIT
......
arch/s390/boot/compressed/Makefile
浏览文件 @ 378102f3
......@@ -10,7 +10,7 @@ targets += misc.o piggy.o sizes.h head.o
KBUILD_CFLAGS := -m64 -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
KBUILD_CFLAGS += $(cflags-y) -fno-delete-null-pointer-checks
KBUILD_CFLAGS += $(cflags-y) -fno-delete-null-pointer-checks -msoft-float
KBUILD_CFLAGS += $(call cc-option,-mpacked-stack)
KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
......
arch/s390/configs/default_defconfig
浏览文件 @ 378102f3
......@@ -381,7 +381,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
......
arch/s390/configs/gcov_defconfig
浏览文件 @ 378102f3
......@@ -377,7 +377,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
......
arch/s390/configs/performance_defconfig
浏览文件 @ 378102f3
......@@ -377,7 +377,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
......
arch/s390/include/asm/Kbuild
浏览文件 @ 378102f3
......@@ -6,3 +6,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
arch/s390/include/asm/numa.h
浏览文件 @ 378102f3
......@@ -19,7 +19,7 @@ int numa_pfn_to_nid(unsigned long pfn);
int __node_distance(int a, int b);
void numa_update_cpu_topology(void);
extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
extern cpumask_t node_to_cpumask_map[MAX_NUMNODES];
extern int numa_debug_enabled;
#else
......
arch/s390/include/asm/topology.h
浏览文件 @ 378102f3
......@@ -68,7 +68,7 @@ static inline int cpu_to_node(int cpu)
#define cpumask_of_node cpumask_of_node
static inline const struct cpumask *cpumask_of_node(int node)
{
return node_to_cpumask_map[node];
return &node_to_cpumask_map[node];
}
/*
......
arch/s390/kernel/asm-offsets.c
浏览文件 @ 378102f3
......@@ -176,6 +176,7 @@ int main(void)
DEFINE(__LC_PASTE, offsetof(struct _lowcore, paste));
DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area));
DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr));
DEFINE(__LC_PERCPU_OFFSET, offsetof(struct _lowcore, percpu_offset));
DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
DEFINE(__LC_PGM_TDB, offsetof(struct _lowcore, pgm_tdb));
......
arch/s390/kernel/entry.S
浏览文件 @ 378102f3
......@@ -733,6 +733,14 @@ ENTRY(psw_idle)
stg %r3,__SF_EMPTY(%r15)
larl %r1,.Lpsw_idle_lpsw+4
stg %r1,__SF_EMPTY+8(%r15)
#ifdef CONFIG_SMP
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz .Lpsw_idle_stcctm
.insn rsy,0xeb0000000017,%r1,5,__SF_EMPTY+16(%r15)
.Lpsw_idle_stcctm:
#endif
STCK __CLOCK_IDLE_ENTER(%r2)
stpt __TIMER_IDLE_ENTER(%r2)
.Lpsw_idle_lpsw:
......@@ -1159,7 +1167,27 @@ cleanup_critical:
jhe 1f
mvc __CLOCK_IDLE_ENTER(8,%r2),__CLOCK_IDLE_EXIT(%r2)
mvc __TIMER_IDLE_ENTER(8,%r2),__TIMER_IDLE_EXIT(%r2)
1: # account system time going idle
1: # calculate idle cycles
#ifdef CONFIG_SMP
clg %r9,BASED(.Lcleanup_idle_insn)
jl 3f
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz 3f
.insn rsy,0xeb0000000017,%r1,5,__SF_EMPTY+80(%r15)
larl %r3,mt_cycles
ag %r3,__LC_PERCPU_OFFSET
la %r4,__SF_EMPTY+16(%r15)
2: lg %r0,0(%r3)
slg %r0,0(%r4)
alg %r0,64(%r4)
stg %r0,0(%r3)
la %r3,8(%r3)
la %r4,8(%r4)
brct %r1,2b
#endif
3: # account system time going idle
lg %r9,__LC_STEAL_TIMER
alg %r9,__CLOCK_IDLE_ENTER(%r2)
slg %r9,__LC_LAST_UPDATE_CLOCK
......
arch/s390/kernel/vtime.c
浏览文件 @ 378102f3
......@@ -25,7 +25,7 @@ static DEFINE_SPINLOCK(virt_timer_lock);
static atomic64_t virt_timer_current;
static atomic64_t virt_timer_elapsed;
static DEFINE_PER_CPU(u64, mt_cycles[32]);
DEFINE_PER_CPU(u64, mt_cycles[8]);
static DEFINE_PER_CPU(u64, mt_scaling_mult) = { 1 };
static DEFINE_PER_CPU(u64, mt_scaling_div) = { 1 };
static DEFINE_PER_CPU(u64, mt_scaling_jiffies);
......@@ -60,6 +60,34 @@ static inline int virt_timer_forward(u64 elapsed)
return elapsed >= atomic64_read(&virt_timer_current);
}
static void update_mt_scaling(void)
{
u64 cycles_new[8], *cycles_old;
u64 delta, fac, mult, div;
int i;
stcctm5(smp_cpu_mtid + 1, cycles_new);
cycles_old = this_cpu_ptr(mt_cycles);
fac = 1;
mult = div = 0;
for (i = 0; i <= smp_cpu_mtid; i++) {
delta = cycles_new[i] - cycles_old[i];
div += delta;
mult *= i + 1;
mult += delta * fac;
fac *= i + 1;
}
div *= fac;
if (div > 0) {
/* Update scaling factor */
__this_cpu_write(mt_scaling_mult, mult);
__this_cpu_write(mt_scaling_div, div);
memcpy(cycles_old, cycles_new,
sizeof(u64) * (smp_cpu_mtid + 1));
}
__this_cpu_write(mt_scaling_jiffies, jiffies_64);
}
/*
* Update process times based on virtual cpu times stored by entry.S
* to the lowcore fields user_timer, system_timer & steal_clock.
......@@ -69,7 +97,6 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
struct thread_info *ti = task_thread_info(tsk);
u64 timer, clock, user, system, steal;
u64 user_scaled, system_scaled;
int i;
timer = S390_lowcore.last_update_timer;
clock = S390_lowcore.last_update_clock;
......@@ -85,34 +112,10 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
S390_lowcore.steal_timer += S390_lowcore.last_update_clock - clock;
/* Do MT utilization calculation */
/* Update MT utilization calculation */
if (smp_cpu_mtid &&
time_after64(jiffies_64, __this_cpu_read(mt_scaling_jiffies))) {
u64 cycles_new[32], *cycles_old;
u64 delta, fac, mult, div;
cycles_old = this_cpu_ptr(mt_cycles);
if (stcctm5(smp_cpu_mtid + 1, cycles_new) < 2) {
fac = 1;
mult = div = 0;
for (i = 0; i <= smp_cpu_mtid; i++) {
delta = cycles_new[i] - cycles_old[i];
div += delta;
mult *= i + 1;
mult += delta * fac;
fac *= i + 1;
}
div *= fac;
if (div > 0) {
/* Update scaling factor */
__this_cpu_write(mt_scaling_mult, mult);
__this_cpu_write(mt_scaling_div, div);
memcpy(cycles_old, cycles_new,
sizeof(u64) * (smp_cpu_mtid + 1));
}
}
__this_cpu_write(mt_scaling_jiffies, jiffies_64);
}
time_after64(jiffies_64, this_cpu_read(mt_scaling_jiffies)))
update_mt_scaling();
user = S390_lowcore.user_timer - ti->user_timer;
S390_lowcore.steal_timer -= user;
......@@ -181,6 +184,11 @@ void vtime_account_irq_enter(struct task_struct *tsk)
S390_lowcore.last_update_timer = get_vtimer();
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
/* Update MT utilization calculation */
if (smp_cpu_mtid &&
time_after64(jiffies_64, this_cpu_read(mt_scaling_jiffies)))
update_mt_scaling();
system = S390_lowcore.system_timer - ti->system_timer;
S390_lowcore.steal_timer -= system;
ti->system_timer = S390_lowcore.system_timer;
......
arch/s390/numa/mode_emu.c
浏览文件 @ 378102f3
此差异已折叠。
arch/s390/numa/numa.c
浏览文件 @ 378102f3
此差异已折叠。
arch/score/include/asm/Kbuild
浏览文件 @ 378102f3
此差异已折叠。
arch/tile/gxio/mpipe.c
浏览文件 @ 378102f3
此差异已折叠。
arch/tile/kernel/usb.c
浏览文件 @ 378102f3
此差异已折叠。
arch/um/include/asm/Kbuild
浏览文件 @ 378102f3
此差异已折叠。
arch/unicore32/include/asm/Kbuild
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/Kconfig
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/include/asm/cpufeature.h
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/include/asm/efi.h
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/include/asm/msr-index.h
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/include/asm/pvclock-abi.h
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/cpu/mshyperv.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/cpu/perf_event.h
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/cpu/scattered.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/crash.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/process.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/process_32.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kernel/process_64.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kvm/svm.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kvm/vmx.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/kvm/x86.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/mm/init_64.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/platform/efi/efi.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/xen/enlighten.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/xen/p2m.c
浏览文件 @ 378102f3
此差异已折叠。
arch/x86/xen/setup.c
浏览文件 @ 378102f3
此差异已折叠。
arch/xtensa/include/asm/Kbuild
浏览文件 @ 378102f3
此差异已折叠。
block/blk-mq-cpumap.c
浏览文件 @ 378102f3
此差异已折叠。
block/blk-mq-sysfs.c
浏览文件 @ 378102f3
此差异已折叠。
block/blk-mq-tag.c
浏览文件 @ 378102f3
此差异已折叠。
block/blk-mq-tag.h
浏览文件 @ 378102f3
此差异已折叠。
block/blk-mq.c
浏览文件 @ 378102f3
此差异已折叠。
block/blk-mq.h
浏览文件 @ 378102f3
此差异已折叠。
drivers/acpi/ec.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/acpi/pci_irq.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/acpi/pci_link.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/base/power/opp.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/block/loop.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/block/null_blk.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/block/nvme-core.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/block/virtio_blk.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/block/xen-blkback/xenbus.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/block/xen-blkfront.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/bus/Kconfig
浏览文件 @ 378102f3
此差异已折叠。
drivers/clk/samsung/clk-cpu.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/clk/ti/clk-3xxx.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/clk/ti/clk-7xx.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/clk/ti/clkt_dflt.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/cpufreq/acpi-cpufreq.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/cpufreq/cpufreq.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/devfreq/devfreq.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/at_xdmac.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/dmaengine.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/dw/core.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/idma64.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/pxa_dma.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/sun4i-dma.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/xgene-dma.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/dma/zx296702_dma.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/drm_fb_helper.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/drm_probe_helper.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/i915/intel_dp_mst.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/i915/intel_lrc.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/i915/intel_lrc.h
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/qxl/qxl_display.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/gpu/drm/radeon/radeon_fb.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/hwmon/abx500.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/hwmon/gpio-fan.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/hwmon/pwm-fan.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/idle/intel_idle.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/infiniband/hw/mlx5/main.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/infiniband/hw/mlx5/qp.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/joystick/Kconfig
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/misc/pm8941-pwrkey.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/misc/uinput.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/mouse/elan_i2c.h
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/mouse/elan_i2c_core.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/mouse/elan_i2c_i2c.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/mouse/synaptics.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/serio/libps2.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/serio/parkbd.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/input/touchscreen/mms114.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/iommu/Kconfig
浏览文件 @ 378102f3
此差异已折叠。
drivers/iommu/intel-iommu.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/iommu/iova.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/irqchip/irq-gic-v3-its.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/irqchip/irq-mips-gic.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mcb/mcb-pci.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/bitmap.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm-exception-store.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm-exception-store.h
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm-raid.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm-snap-persistent.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm-snap-transient.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm-snap.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/dm.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/md.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/multipath.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/raid0.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/raid1.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/raid10.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/md/raid5.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/misc/mei/hbm.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/core/core.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/core/host.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/omap_hsmmc.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/pxamci.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/sdhci-of-at91.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/sdhci-pxav3.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/sdhci.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/sdhci.h
浏览文件 @ 378102f3
此差异已折叠。
drivers/mmc/host/sunxi-mmc.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mtd/nand/mxc_nand.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mtd/nand/sunxi_nand.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mtd/ubi/io.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mtd/ubi/vtbl.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/mtd/ubi/wl.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/net/dsa/mv88e6xxx.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/nvmem/core.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/nvmem/sunxi_sid.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/pci/pci-driver.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/phy/phy-berlin-sata.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/phy/phy-qcom-ufs.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/phy/phy-rockchip-usb.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/regulator/core.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/scsi/3w-9xxx.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/scsi/libiscsi.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/scsi/scsi_dh.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/scsi/scsi_lib.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/spi/spi-davinci.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/staging/speakup/fakekey.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/thermal/power_allocator.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/tty/n_tty.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/tty/serial/8250/8250_port.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/tty/serial/atmel_serial.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/tty/serial/imx.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/tty/tty_buffer.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/tty/tty_io.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/usb/core/quirks.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/usb/gadget/udc/bdc/bdc_ep.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/usb/misc/chaoskey.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/usb/renesas_usbhs/common.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/video/fbdev/broadsheetfb.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/video/fbdev/fsl-diu-fb.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/video/fbdev/tridentfb.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/video/of_display_timing.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/watchdog/Kconfig
浏览文件 @ 378102f3
此差异已折叠。
drivers/watchdog/bcm2835_wdt.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/watchdog/gef_wdt.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/watchdog/mena21_wdt.c
浏览文件 @ 378102f3
此差异已折叠。
drivers/watchdog/moxart_wdt.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/disk-io.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/export.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/extent_io.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/send.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/transaction.c
浏览文件 @ 378102f3
此差异已折叠。
fs/btrfs/transaction.h
浏览文件 @ 378102f3
此差异已折叠。
fs/cifs/cifsfs.h
浏览文件 @ 378102f3
此差异已折叠。
fs/cifs/inode.c
浏览文件 @ 378102f3
此差异已折叠。
fs/cifs/smb2pdu.c
浏览文件 @ 378102f3
此差异已折叠。
fs/dax.c
浏览文件 @ 378102f3
此差异已折叠。
fs/namei.c
浏览文件 @ 378102f3
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ 378102f3
此差异已折叠。
fs/nfs/nfs4state.c
浏览文件 @ 378102f3
此差异已折叠。
fs/nfs/nfs4trace.h
浏览文件 @ 378102f3
此差异已折叠。
fs/nfs/write.c
浏览文件 @ 378102f3
此差异已折叠。
fs/ubifs/xattr.c
浏览文件 @ 378102f3
此差异已折叠。
include/drm/drm_crtc_helper.h
浏览文件 @ 378102f3
此差异已折叠。
include/drm/drm_dp_helper.h
浏览文件 @ 378102f3
此差异已折叠。
include/drm/drm_dp_mst_helper.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/acpi.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/blk-mq.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/blkdev.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/iova.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/irqdomain.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/memcontrol.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/mlx5/device.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/mlx5/driver.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/mm.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/rcupdate.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/skbuff.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/string.h
浏览文件 @ 378102f3
此差异已折叠。
include/linux/usb/renesas_usbhs.h
浏览文件 @ 378102f3
此差异已折叠。
include/net/af_unix.h
浏览文件 @ 378102f3
此差异已折叠。
include/uapi/linux/userfaultfd.h
浏览文件 @ 378102f3
此差异已折叠。
include/xen/interface/sched.h
浏览文件 @ 378102f3
此差异已折叠。
ipc/msg.c
浏览文件 @ 378102f3
此差异已折叠。
ipc/shm.c
浏览文件 @ 378102f3
此差异已折叠。
ipc/util.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/events/core.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/irq/handle.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/irq/proc.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/locking/lockdep.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/rcu/tree.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/sched/core.c
浏览文件 @ 378102f3
此差异已折叠。
kernel/sched/sched.h
浏览文件 @ 378102f3
此差异已折叠。
kernel/time/clocksource.c
浏览文件 @ 378102f3
此差异已折叠。
lib/string.c
浏览文件 @ 378102f3
此差异已折叠。
mm/dmapool.c
浏览文件 @ 378102f3
此差异已折叠。
mm/filemap.c
浏览文件 @ 378102f3
此差异已折叠。
mm/hugetlb.c
浏览文件 @ 378102f3
此差异已折叠。
mm/memcontrol.c
浏览文件 @ 378102f3
此差异已折叠。
mm/migrate.c
浏览文件 @ 378102f3
此差异已折叠。
mm/slab.c
浏览文件 @ 378102f3
此差异已折叠。
net/core/net-sysfs.c
浏览文件 @ 378102f3
此差异已折叠。
net/core/skbuff.c
浏览文件 @ 378102f3
此差异已折叠。
net/dsa/slave.c
浏览文件 @ 378102f3
此差异已折叠。
net/ipv4/fib_frontend.c
浏览文件 @ 378102f3
此差异已折叠。
net/ipv4/route.c
浏览文件 @ 378102f3
此差异已折叠。
net/ipv6/route.c
浏览文件 @ 378102f3
此差异已折叠。
net/l2tp/l2tp_core.c
浏览文件 @ 378102f3
此差异已折叠。
net/sctp/associola.c
浏览文件 @ 378102f3
此差异已折叠。
net/sctp/sm_sideeffect.c
浏览文件 @ 378102f3
此差异已折叠。
net/sunrpc/xprtrdma/fmr_ops.c
浏览文件 @ 378102f3
此差异已折叠。
net/sunrpc/xprtrdma/frwr_ops.c
浏览文件 @ 378102f3
此差异已折叠。
net/sunrpc/xprtrdma/physical_ops.c
浏览文件 @ 378102f3
此差异已折叠。
net/sunrpc/xprtrdma/transport.c
浏览文件 @ 378102f3
此差异已折叠。
net/sunrpc/xprtrdma/verbs.c
浏览文件 @ 378102f3
此差异已折叠。
net/sunrpc/xprtrdma/xprt_rdma.h
浏览文件 @ 378102f3
此差异已折叠。
net/unix/af_unix.c
浏览文件 @ 378102f3
此差异已折叠。
samples/kprobes/jprobe_example.c
浏览文件 @ 378102f3
此差异已折叠。
samples/kprobes/kprobe_example.c
浏览文件 @ 378102f3
此差异已折叠。
samples/kprobes/kretprobe_example.c
浏览文件 @ 378102f3
此差异已折叠。
scripts/extract-cert.c
浏览文件 @ 378102f3
此差异已折叠。
scripts/sign-file.c
浏览文件 @ 378102f3
此差异已折叠。
security/keys/gc.c
浏览文件 @ 378102f3
此差异已折叠。
sound/pci/hda/patch_cirrus.c
浏览文件 @ 378102f3
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 378102f3
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/au1x/db1200.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/codecs/rt5645.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/codecs/rt5645.h
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/codecs/sgtl5000.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/codecs/tas2552.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/codecs/tlv320aic3x.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/codecs/wm8962.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/dwc/designware_i2s.c
浏览文件 @ 378102f3
此差异已折叠。
sound/soc/fsl/imx-ssi.c
浏览文件 @ 378102f3
此差异已折叠。
sound/synth/emux/emux_oss.c
浏览文件 @ 378102f3
此差异已折叠。
tools/build/Makefile.feature
浏览文件 @ 378102f3
此差异已折叠。
tools/build/feature/Makefile
浏览文件 @ 378102f3
此差异已折叠。
tools/build/feature/test-all.c
浏览文件 @ 378102f3
此差异已折叠。
tools/build/feature/test-get_cpuid.c 0 → 100644
浏览文件 @ 378102f3
此差异已折叠。
tools/build/feature/test-numa_num_possible_cpus.c 0 → 100644
浏览文件 @ 378102f3
此差异已折叠。
tools/lib/traceevent/event-parse.c
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/config/Makefile
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/Build
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/perf_regs.c
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/perf_regs.h
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/probe-event.c
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/session.c
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/stat.c
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/symbol-elf.c
浏览文件 @ 378102f3
此差异已折叠。
tools/perf/util/util.c
浏览文件 @ 378102f3
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或
反馈
建议 客服 返回
顶部