Merge branch 'topic/qcom' into for-linus

Documentation/dmaengine/provider.txt

@@ -395,6 +395,13 @@ where to put them)
 	  when DMA_CTRL_REUSE is already set
 	- Terminating the channel
 
+  * DMA_PREP_CMD
+    - If set, the client driver tells DMA controller that passed data in DMA
+      API is command data.
+    - Interpretation of command data is DMA controller specific. It can be
+      used for issuing commands to other peripherals/register reads/register
+      writes for which the descriptor should be in different format from
+      normal data descriptors.
 
 General Design Notes
 --------------------

drivers/dma/qcom/bam_dma.c

@@ -65,6 +65,7 @@ struct bam_desc_hw {
 #define DESC_FLAG_EOT BIT(14)
 #define DESC_FLAG_EOB BIT(13)
 #define DESC_FLAG_NWD BIT(12)
+#define DESC_FLAG_CMD BIT(11)
 
 struct bam_async_desc {
 	struct virt_dma_desc vd;
@@ -645,6 +646,9 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
 		unsigned int curr_offset = 0;
 
 		do {
+			if (flags & DMA_PREP_CMD)
+				desc->flags |= cpu_to_le16(DESC_FLAG_CMD);
+
 			desc->addr = cpu_to_le32(sg_dma_address(sg) +
 						 curr_offset);
 
@@ -960,7 +964,7 @@ static void bam_start_dma(struct bam_chan *bchan)
 
 	/* set any special flags on the last descriptor */
 	if (async_desc->num_desc == async_desc->xfer_len)
-		desc[async_desc->xfer_len - 1].flags =
+		desc[async_desc->xfer_len - 1].flags |=
 					cpu_to_le16(async_desc->flags);
 	else
 		desc[async_desc->xfer_len - 1].flags |=

drivers/dma/qcom/hidma.c

@@ -411,7 +411,40 @@ hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dest, dma_addr_t src,
 		return NULL;
 
 	hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
-				     src, dest, len, flags);
+				     src, dest, len, flags,
+				     HIDMA_TRE_MEMCPY);
+
+	/* Place descriptor in prepared list */
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	list_add_tail(&mdesc->node, &mchan->prepared);
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	return &mdesc->desc;
+}
+
+static struct dma_async_tx_descriptor *
+hidma_prep_dma_memset(struct dma_chan *dmach, dma_addr_t dest, int value,
+		size_t len, unsigned long flags)
+{
+	struct hidma_chan *mchan = to_hidma_chan(dmach);
+	struct hidma_desc *mdesc = NULL;
+	struct hidma_dev *mdma = mchan->dmadev;
+	unsigned long irqflags;
+
+	/* Get free descriptor */
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	if (!list_empty(&mchan->free)) {
+		mdesc = list_first_entry(&mchan->free, struct hidma_desc, node);
+		list_del(&mdesc->node);
+	}
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	if (!mdesc)
+		return NULL;
+
+	hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
+				     value, dest, len, flags,
+				     HIDMA_TRE_MEMSET);
 
 	/* Place descriptor in prepared list */
 	spin_lock_irqsave(&mchan->lock, irqflags);
@@ -776,6 +809,7 @@ static int hidma_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dmadev->ddev.dev);
 
 	dma_cap_set(DMA_MEMCPY, dmadev->ddev.cap_mask);
+	dma_cap_set(DMA_MEMSET, dmadev->ddev.cap_mask);
 	if (WARN_ON(!pdev->dev.dma_mask)) {
 		rc = -ENXIO;
 		goto dmafree;
@@ -786,6 +820,7 @@ static int hidma_probe(struct platform_device *pdev)
 	dmadev->dev_trca = trca;
 	dmadev->trca_resource = trca_resource;
 	dmadev->ddev.device_prep_dma_memcpy = hidma_prep_dma_memcpy;
+	dmadev->ddev.device_prep_dma_memset = hidma_prep_dma_memset;
 	dmadev->ddev.device_alloc_chan_resources = hidma_alloc_chan_resources;
 	dmadev->ddev.device_free_chan_resources = hidma_free_chan_resources;
 	dmadev->ddev.device_tx_status = hidma_tx_status;

drivers/dma/qcom/hidma.h

@@ -28,6 +28,11 @@
 #define HIDMA_TRE_DEST_LOW_IDX		4
 #define HIDMA_TRE_DEST_HI_IDX		5
 
+enum tre_type {
+	HIDMA_TRE_MEMCPY = 3,
+	HIDMA_TRE_MEMSET = 4,
+};
+
 struct hidma_tre {
 	atomic_t allocated;		/* if this channel is allocated	    */
 	bool queued;			/* flag whether this is pending     */
@@ -150,7 +155,7 @@ void hidma_ll_start(struct hidma_lldev *llhndl);
 int hidma_ll_disable(struct hidma_lldev *lldev);
 int hidma_ll_enable(struct hidma_lldev *llhndl);
 void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
-	dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+	dma_addr_t src, dma_addr_t dest, u32 len, u32 flags, u32 txntype);
 void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi);
 int hidma_ll_setup(struct hidma_lldev *lldev);
 struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,

drivers/dma/qcom/hidma_ll.c

@@ -105,10 +105,6 @@ enum ch_state {
 	HIDMA_CH_STOPPED = 4,
 };
 
-enum tre_type {
-	HIDMA_TRE_MEMCPY = 3,
-};
-
 enum err_code {
 	HIDMA_EVRE_STATUS_COMPLETE = 1,
 	HIDMA_EVRE_STATUS_ERROR = 4,
@@ -174,8 +170,7 @@ int hidma_ll_request(struct hidma_lldev *lldev, u32 sig, const char *dev_name,
 	tre->err_info = 0;
 	tre->lldev = lldev;
 	tre_local = &tre->tre_local[0];
-	tre_local[HIDMA_TRE_CFG_IDX] = HIDMA_TRE_MEMCPY;
-	tre_local[HIDMA_TRE_CFG_IDX] |= (lldev->chidx & 0xFF) << 8;
+	tre_local[HIDMA_TRE_CFG_IDX] = (lldev->chidx & 0xFF) << 8;
 	tre_local[HIDMA_TRE_CFG_IDX] |= BIT(16);	/* set IEOB */
 	*tre_ch = i;
 	if (callback)
@@ -607,7 +602,7 @@ int hidma_ll_disable(struct hidma_lldev *lldev)
 
 void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
 				  dma_addr_t src, dma_addr_t dest, u32 len,
-				  u32 flags)
+				  u32 flags, u32 txntype)
 {
 	struct hidma_tre *tre;
 	u32 *tre_local;
@@ -626,6 +621,8 @@ void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
 	}
 
 	tre_local = &tre->tre_local[0];
+	tre_local[HIDMA_TRE_CFG_IDX] &= ~GENMASK(7, 0);
+	tre_local[HIDMA_TRE_CFG_IDX] |= txntype;
 	tre_local[HIDMA_TRE_LEN_IDX] = len;
 	tre_local[HIDMA_TRE_SRC_LOW_IDX] = lower_32_bits(src);
 	tre_local[HIDMA_TRE_SRC_HI_IDX] = upper_32_bits(src);

drivers/dma/qcom/hidma_mgmt.c

@@ -28,7 +28,7 @@
 
 #include "hidma_mgmt.h"
 
-#define HIDMA_QOS_N_OFFSET		0x300
+#define HIDMA_QOS_N_OFFSET		0x700
 #define HIDMA_CFG_OFFSET		0x400
 #define HIDMA_MAX_BUS_REQ_LEN_OFFSET	0x41C
 #define HIDMA_MAX_XACTIONS_OFFSET	0x420
@@ -227,7 +227,8 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	if (max_write_request) {
+	if (max_write_request &&
+			(max_write_request != mgmtdev->max_write_request)) {
 		dev_info(&pdev->dev, "overriding max-write-burst-bytes: %d\n",
 			max_write_request);
 		mgmtdev->max_write_request = max_write_request;
@@ -240,7 +241,8 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
 		goto out;
 	}
-	if (max_read_request) {
+	if (max_read_request &&
+			(max_read_request != mgmtdev->max_read_request)) {
 		dev_info(&pdev->dev, "overriding max-read-burst-bytes: %d\n",
 			max_read_request);
 		mgmtdev->max_read_request = max_read_request;
@@ -253,7 +255,8 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "max-write-transactions missing\n");
 		goto out;
 	}
-	if (max_wr_xactions) {
+	if (max_wr_xactions &&
+			(max_wr_xactions != mgmtdev->max_wr_xactions)) {
 		dev_info(&pdev->dev, "overriding max-write-transactions: %d\n",
 			max_wr_xactions);
 		mgmtdev->max_wr_xactions = max_wr_xactions;
@@ -266,7 +269,8 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "max-read-transactions missing\n");
 		goto out;
 	}
-	if (max_rd_xactions) {
+	if (max_rd_xactions &&
+			(max_rd_xactions != mgmtdev->max_rd_xactions)) {
 		dev_info(&pdev->dev, "overriding max-read-transactions: %d\n",
 			max_rd_xactions);
 		mgmtdev->max_rd_xactions = max_rd_xactions;
@@ -354,7 +358,7 @@ static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
 	struct platform_device_info pdevinfo;
 	struct of_phandle_args out_irq;
 	struct device_node *child;
-	struct resource *res;
+	struct resource *res = NULL;
 	const __be32 *cell;
 	int ret = 0, size, i, num;
 	u64 addr, addr_size;

include/linux/dma/qcom_bam_dma.h

+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _QCOM_BAM_DMA_H
+#define _QCOM_BAM_DMA_H
+
+#include <asm/byteorder.h>
+
+/*
+ * This data type corresponds to the native Command Element
+ * supported by BAM DMA Engine.
+ *
+ * @cmd_and_addr - upper 8 bits command and lower 24 bits register address.
+ * @data - for write command: content to be written into peripheral register.
+ *	   for read command: dest addr to write peripheral register value.
+ * @mask - register mask.
+ * @reserved - for future usage.
+ *
+ */
+struct bam_cmd_element {
+	__le32 cmd_and_addr;
+	__le32 data;
+	__le32 mask;
+	__le32 reserved;
+};
+
+/*
+ * This enum indicates the command type in a command element
+ */
+enum bam_command_type {
+	BAM_WRITE_COMMAND = 0,
+	BAM_READ_COMMAND,
+};
+
+/*
+ * prep_bam_ce_le32 - Wrapper function to prepare a single BAM command
+ * element with the data already in le32 format.
+ *
+ * @bam_ce: bam command element
+ * @addr: target address
+ * @cmd: BAM command
+ * @data: actual data for write and dest addr for read in le32
+ */
+static inline void
+bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr,
+		 enum bam_command_type cmd, __le32 data)
+{
+	bam_ce->cmd_and_addr =
+		cpu_to_le32((addr & 0xffffff) | ((cmd & 0xff) << 24));
+	bam_ce->data = data;
+	bam_ce->mask = cpu_to_le32(0xffffffff);
+}
+
+/*
+ * bam_prep_ce - Wrapper function to prepare a single BAM command element
+ * with the data.
+ *
+ * @bam_ce: BAM command element
+ * @addr: target address
+ * @cmd: BAM command
+ * @data: actual data for write and dest addr for read
+ */
+static inline void
+bam_prep_ce(struct bam_cmd_element *bam_ce, u32 addr,
+	    enum bam_command_type cmd, u32 data)
+{
+	bam_prep_ce_le32(bam_ce, addr, cmd, cpu_to_le32(data));
+}
+#endif

include/linux/dmaengine.h

@@ -186,6 +186,9 @@ struct dma_interleaved_template {
  *  on the result of this operation
  * @DMA_CTRL_REUSE: client can reuse the descriptor and submit again till
  *  cleared or freed
+ * @DMA_PREP_CMD: tell the driver that the data passed to DMA API is command
+ *  data and the descriptor should be in different format from normal
+ *  data descriptors.
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
@@ -195,6 +198,7 @@ enum dma_ctrl_flags {
 	DMA_PREP_CONTINUE = (1 << 4),
 	DMA_PREP_FENCE = (1 << 5),
 	DMA_CTRL_REUSE = (1 << 6),
+	DMA_PREP_CMD = (1 << 7),
 };
 
 /**