Merge branch 'master' into export-slabh

Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt

@@ -21,6 +21,15 @@ Required properties:
 - fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
   threads.
 
+Optional properties:
+- fsl,firmware-phandle:
+    Usage: required only if there is no fsl,qe-firmware child node
+    Value type: <phandle>
+    Definition: Points to a firmware node (see "QE Firmware Node" below)
+        that contains the firmware that should be uploaded for this QE.
+        The compatible property for the firmware node should say,
+        "fsl,qe-firmware".
+
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
   generators in Hz.
@@ -59,3 +68,48 @@ Example:
 		reg = <0 c000>;
 	};
      };
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties.  The node should be placed
+inside a QE node that needs it.  Doing so eliminates the need for a
+fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: A standard property.  Specify a string that indicates what
+          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
+
+   - fsl,firmware
+      Usage: required
+      Value type: <prop-encoded-array>, encoded as an array of bytes
+      Definition: A standard property.  This property contains the firmware
+          binary "blob".
+
+Example:
+	qe1@e0080000 {
+		compatible = "fsl,qe";
+		qe_firmware:qe-firmware {
+			compatible = "fsl,qe-firmware";
+			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+		};
+		...
+	};
+
+	qe2@e0090000 {
+		compatible = "fsl,qe";
+		fsl,firmware-phandle = <&qe_firmware>;
+		...
+	};

MAINTAINERS

@@ -3270,6 +3270,16 @@ S:	Maintained
 F:	include/linux/kexec.h
 F:	kernel/kexec.c
 
+KEYS/KEYRINGS:
+M:	David Howells <dhowells@redhat.com>
+L:	keyrings@linux-nfs.org
+S:	Maintained
+F:	Documentation/keys.txt
+F:	include/linux/key.h
+F:	include/linux/key-type.h
+F:	include/keys/
+F:	security/keys/
+
 KGDB
 M:	Jason Wessel <jason.wessel@windriver.com>
 L:	kgdb-bugreport@lists.sourceforge.net

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

arch/arm/include/asm/cacheflush.h

@@ -15,6 +15,7 @@
 #include <asm/glue.h>
 #include <asm/shmparam.h>
 #include <asm/cachetype.h>
+#include <asm/outercache.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
@@ -219,12 +220,6 @@ struct cpu_cache_fns {
 	void (*dma_flush_range)(const void *, const void *);
 };
 
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-};
-
 /*
  * Select the calling method
  */
@@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user

arch/arm/include/asm/clkdev.h

@@ -13,6 +13,7 @@
 #define __ASM_CLKDEV_H
 
 struct clk;
+struct device;
 
 struct clk_lookup {
 	struct list_head	node;

arch/arm/include/asm/irq.h

@@ -17,6 +17,7 @@
 
 #ifndef __ASSEMBLY__
 struct irqaction;
+struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);

arch/arm/include/asm/outercache.h

+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+	void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+	if (outer_cache.sync)
+		outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif	/* __ASM_OUTERCACHE_H */

arch/arm/include/asm/system.h

@@ -60,6 +60,8 @@
 #include <linux/linkage.h>
 #include <linux/irqflags.h>
 
+#include <asm/outercache.h>
+
 #define __exception	__attribute__((section(".exception.text")))
 
 struct thread_info;
@@ -137,10 +139,12 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb()		dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dmb()
-#define wmb()		dmb()
+#define wmb()		mb()
 #else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@@ -152,9 +156,9 @@ extern unsigned int user_debug;
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
 #endif
 
 #define read_barrier_depends()		do { } while(0)

arch/arm/kernel/kprobes.c

@@ -394,6 +394,14 @@ void __kprobes jprobe_return(void)
 		/*
 		 * Setup an empty pt_regs. Fill SP and PC fields as
 		 * they're needed by longjmp_break_handler.
+		 *
+		 * We allocate some slack between the original SP and start of
+		 * our fabricated regs. To be precise we want to have worst case
+		 * covered which is STMFD with all 16 regs so we allocate 2 *
+		 * sizeof(struct_pt_regs)).
+		 *
+		 * This is to prevent any simulated instruction from writing
+		 * over the regs when they are accessing the stack.
 		 */
 		"sub    sp, %0, %1		\n\t"
 		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@@ -411,7 +419,7 @@ void __kprobes jprobe_return(void)
 		"ldmia	sp, {r0 - pc}		\n\t"
 		:
 		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs)),
+		  "I" (sizeof(struct pt_regs) * 2),
 		  "J" (offsetof(struct pt_regs, ARM_sp)),
 		  "J" (offsetof(struct pt_regs, ARM_pc)),
 		  "J" (offsetof(struct pt_regs, ARM_cpsr))

arch/arm/lib/memmove.S

@@ -74,7 +74,7 @@ ENTRY(memmove)
 		rsb	ip, ip, #32
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:		W(nop)
 		W(ldr)	r3, [r1, #-4]!
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
@@ -85,7 +85,7 @@ ENTRY(memmove)
 
 		add	pc, pc, ip
 		nop
-		nop
+		W(nop)
 		W(str)	r3, [r0, #-4]!
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!

arch/arm/mm/Kconfig

@@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 config OUTER_CACHE
 	bool
 
+config OUTER_CACHE_SYNC
+	bool
+	help
+	  The outer cache has a outer_cache_fns.sync function pointer
+	  that can be used to drain the write buffer of the outer cache.
+
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
 	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
@@ -757,6 +763,7 @@ config CACHE_L2X0
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
 	default y
 	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
 	help
 	  This option enables the L2x0 PrimeCell.
 
@@ -781,3 +788,9 @@ config ARM_L1_CACHE_SHIFT
 	int
 	default 6 if ARM_L1_CACHE_SHIFT_6
 	default 5
+
+config ARCH_HAS_BARRIERS
+	bool
+	help
+	  This option allows the use of custom mandatory barriers
+	  included via the mach/barriers.h file.

arch/arm/mm/cache-l2x0.c

@@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr)
 }
 #endif
 
+static void l2x0_cache_sync(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l2x0_lock, flags);
+	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
 static inline void l2x0_inv_all(void)
 {
 	unsigned long flags;
@@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
 	outer_cache.flush_range = l2x0_flush_range;
+	outer_cache.sync = l2x0_cache_sync;
 
 	printk(KERN_INFO "L2X0 cache controller enabled\n");
 }

arch/arm/vfp/vfpmodule.c

@@ -545,7 +545,7 @@ static int __init vfp_init(void)
 		 */
 		elf_hwcap |= HWCAP_VFP;
 #ifdef CONFIG_VFPv3
-		if (VFP_arch >= 3) {
+		if (VFP_arch >= 2) {
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*

arch/microblaze/Kconfig

@@ -75,9 +75,6 @@ config LOCKDEP_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config PCI
-	def_bool n
-
 config DTC
 	def_bool y
 

arch/microblaze/Makefile

@@ -84,7 +84,7 @@ define archhelp
   echo '* linux.bin    - Create raw binary'
   echo '  linux.bin.gz - Create compressed raw binary'
   echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
-  echo '                   - stripped elf with fdt blob
+  echo '                   - stripped elf with fdt blob'
   echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
   echo '  *_defconfig      - Select default config from arch/microblaze/configs'
   echo ''
@@ -94,3 +94,5 @@ define archhelp
   echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
   echo '  (minus the .dts extension).'
 endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*

arch/microblaze/boot/Makefile

@@ -23,8 +23,6 @@ $(obj)/system.dtb: $(obj)/$(DTB).dtb
 endif
 
 $(obj)/linux.bin: vmlinux FORCE
-	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
-	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
 	$(call if_changed,uimage)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
@@ -62,6 +60,4 @@ quiet_cmd_dtc = DTC     $@
 $(obj)/%.dtb: $(dtstree)/%.dts FORCE
 	$(call if_changed,dtc)
 
-clean-kernel += linux.bin linux.bin.gz simpleImage.*
-
-clean-files += *.dtb simpleImage.*.unstrip
+clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub

arch/microblaze/include/asm/processor.h

@@ -14,7 +14,6 @@
 #include <asm/ptrace.h>
 #include <asm/setup.h>
 #include <asm/registers.h>
-#include <asm/segment.h>
 #include <asm/entry.h>
 #include <asm/current.h>
 

arch/microblaze/include/asm/segment.h

-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEGMENT_H
-#define _ASM_MICROBLAZE_SEGMENT_H
-
-# ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-/*
- * On Microblaze the fs value is actually the top of the corresponding
- * address space.
- *
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
- */
-# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
-
-#  ifndef CONFIG_MMU
-#  define KERNEL_DS	MAKE_MM_SEG(0)
-#  define USER_DS	KERNEL_DS
-#  else
-#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
-#  endif
-
-# define get_ds()	(KERNEL_DS)
-# define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(val)	(current_thread_info()->addr_limit = (val))
-
-# define segment_eq(a, b)	((a).seg == (b).seg)
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SEGMENT_H */

arch/microblaze/include/asm/thread_info.h

@@ -19,7 +19,6 @@
 #ifndef __ASSEMBLY__
 # include <linux/types.h>
 # include <asm/processor.h>
-# include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -60,6 +59,10 @@ struct cpu_context {
 	__u32	fsr;
 };
 
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
 struct thread_info {
 	struct task_struct	*task; /* main task structure */
 	struct exec_domain	*exec_domain; /* execution domain */

arch/microblaze/include/asm/tlbflush.h

@@ -24,6 +24,7 @@ extern void _tlbie(unsigned long address);
 extern void _tlbia(void);
 
 #define __tlbia()	{ preempt_disable(); _tlbia(); preempt_enable(); }
+#define __tlbie(x)	{ _tlbie(x); }
 
 static inline void local_flush_tlb_all(void)
 	{ __tlbia(); }
@@ -31,7 +32,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	{ __tlbia(); }
 static inline void local_flush_tlb_page(struct vm_area_struct *vma,
 				unsigned long vmaddr)
-	{ _tlbie(vmaddr); }
+	{ __tlbie(vmaddr); }
 static inline void local_flush_tlb_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end)
 	{ __tlbia(); }

arch/microblaze/include/asm/uaccess.h

@@ -22,101 +22,73 @@
 #include <asm/mmu.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/segment.h>
 #include <linux/string.h>
 
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
-#define __clear_user(addr, n)	(memset((void *)(addr), 0, (n)), 0)
-
-#ifndef CONFIG_MMU
-
-extern int ___range_ok(unsigned long addr, unsigned long size);
-
-#define __range_ok(addr, size) \
-		___range_ok((unsigned long)(addr), (unsigned long)(size))
-
-#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
-#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
-
-/* Undefined function to trigger linker error */
-extern int bad_user_access_length(void);
-
-/* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr)				\
-({							\
-	int __gu_err = 0;				\
-	switch (sizeof(*(ptr))) {			\
-	case 1:						\
-	case 2:						\
-	case 4:						\
-		(var) = *(ptr);				\
-		break;					\
-	case 8:						\
-		memcpy((void *) &(var), (ptr), 8);	\
-		break;					\
-	default:					\
-		(var) = 0;				\
-		__gu_err = __get_user_bad();		\
-		break;					\
-	}						\
-	__gu_err;					\
-})
+/*
+ * On Microblaze the fs value is actually the top of the corresponding
+ * address space.
+ *
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
+ */
+# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
 
-#define __get_user_bad()	(bad_user_access_length(), (-EFAULT))
+#  ifndef CONFIG_MMU
+#  define KERNEL_DS	MAKE_MM_SEG(0)
+#  define USER_DS	KERNEL_DS
+#  else
+#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
+#  endif
 
-/* FIXME is not there defined __pu_val */
-#define __put_user(var, ptr)					\
-({								\
-	int __pu_err = 0;					\
-	switch (sizeof(*(ptr))) {				\
-	case 1:							\
-	case 2:							\
-	case 4:							\
-		*(ptr) = (var);					\
-		break;						\
-	case 8: {						\
-		typeof(*(ptr)) __pu_val = (var);		\
-		memcpy(ptr, &__pu_val, sizeof(__pu_val));	\
-		}						\
-		break;						\
-	default:						\
-		__pu_err = __put_user_bad();			\
-		break;						\
-	}							\
-	__pu_err;						\
-})
+# define get_ds()	(KERNEL_DS)
+# define get_fs()	(current_thread_info()->addr_limit)
+# define set_fs(val)	(current_thread_info()->addr_limit = (val))
 
-#define __put_user_bad()	(bad_user_access_length(), (-EFAULT))
+# define segment_eq(a, b)	((a).seg == (b).seg)
 
-#define put_user(x, ptr)	__put_user((x), (ptr))
-#define get_user(x, ptr)	__get_user((x), (ptr))
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
 
-#define copy_to_user(to, from, n)	(memcpy((to), (from), (n)), 0)
-#define copy_from_user(to, from, n)	(memcpy((to), (from), (n)), 0)
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
 
-#define __copy_to_user(to, from, n)	(copy_to_user((to), (from), (n)))
-#define __copy_from_user(to, from, n)	(copy_from_user((to), (from), (n)))
-#define __copy_to_user_inatomic(to, from, n) \
-			(__copy_to_user((to), (from), (n)))
-#define __copy_from_user_inatomic(to, from, n) \
-			(__copy_from_user((to), (from), (n)))
+#ifndef CONFIG_MMU
 
-static inline unsigned long clear_user(void *addr, unsigned long size)
+/* Check against bounds of physical memory */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
 {
-	if (access_ok(VERIFY_WRITE, addr, size))
-		size = __clear_user(addr, size);
-	return size;
+	return ((addr < memory_start) ||
+		((addr + size) > memory_end));
 }
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
+#define __range_ok(addr, size) \
+		___range_ok((unsigned long)(addr), (unsigned long)(size))
 
-extern long strncpy_from_user(char *dst, const char *src, long count);
-extern long strnlen_user(const char *src, long count);
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 
-#else /* CONFIG_MMU */
+#else
 
 /*
  * Address is valid if:
@@ -129,24 +101,88 @@ extern long strnlen_user(const char *src, long count);
 /* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
  type?"WRITE":"READ",addr,size,get_fs().seg)) */
 
-/*
- * All the __XXX versions macros/functions below do not perform
- * access checking. It is assumed that the necessary checks have been
- * already performed before the finction (macro) is called.
- */
+#endif
 
-#define get_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
-		? __get_user((x), (ptr)) : -EFAULT;			\
-})
+#ifdef CONFIG_MMU
+# define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
+#else
+# define __FIXUP_SECTION	".section .discard,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section .discard,\"a\"\n"
+#endif
 
-#define put_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
-		? __put_user((x), (ptr)) : -EFAULT;			\
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */
+static inline unsigned long __must_check __clear_user(void __user *to,
+							unsigned long n)
+{
+	/* normal memset with two words to __ex_table */
+	__asm__ __volatile__ (				\
+			"1:	sb	r0, %2, r0;"	\
+			"	addik	%0, %0, -1;"	\
+			"	bneid	%0, 1b;"	\
+			"	addik	%2, %2, 1;"	\
+			"2:			"	\
+			__EX_TABLE_SECTION		\
+			".word	1b,2b;"			\
+			".previous;"			\
+		: "=r"(n)				\
+		: "0"(n), "r"(to)
+	);
+	return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+							unsigned long n)
+{
+	might_sleep();
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+/* put_user and get_user macros */
+extern long __user_bad(void);
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err), "=r"(__gu_val)		\
+		: "r"(__gu_ptr), "i"(-EFAULT)			\
+	);							\
 })
 
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
 #define __get_user(x, ptr)						\
 ({									\
 	unsigned long __gu_val;						\
@@ -163,30 +199,74 @@ extern long strnlen_user(const char *src, long count);
 		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
 		break;							\
 	default:							\
-		__gu_val = 0; __gu_err = -EINVAL;			\
+		/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
 	}								\
 	x = (__typeof__(*(ptr))) __gu_val;				\
 	__gu_err;							\
 })
 
-#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)		\
+
+#define get_user(x, ptr)						\
 ({									\
-	__asm__ __volatile__ (						\
-			"1:"	insn	" %1, %2, r0;			\
-				addk	%0, r0, r0;			\
-			2:						\
-			.section .fixup,\"ax\";				\
-			3:	brid	2b;				\
-				addik	%0, r0, %3;			\
-			.previous;					\
-			.section __ex_table,\"a\";			\
-			.word	1b,3b;					\
-			.previous;"					\
-		: "=r"(__gu_err), "=r"(__gu_val)			\
-		: "r"(__gu_ptr), "i"(-EFAULT)				\
-	);								\
+	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
+		? __get_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
 })
 
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)		\
+({								\
+	__asm__ __volatile__ ("	lwi	%0, %1, 0;"		\
+			"1:	swi	%0, %2, 0;"		\
+			"	lwi	%0, %1, 4;"		\
+			"2:	swi	%0, %2, 4;"		\
+			"	addk	%0, r0, r0;"		\
+			"3:			"		\
+			__FIXUP_SECTION				\
+			"4:	brid	3b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,4b,2b,4b;"			\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+		);						\
+})
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
 #define __put_user(x, ptr)						\
 ({									\
 	__typeof__(*(ptr)) volatile __gu_val = (x);			\
@@ -195,7 +275,7 @@ extern long strnlen_user(const char *src, long count);
 	case 1:								\
 		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
 		break;							\
-	case 2: 							\
+	case 2:								\
 		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
 		break;							\
 	case 4:								\
@@ -205,121 +285,82 @@ extern long strnlen_user(const char *src, long count);
 		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
 		break;							\
 	default:							\
-		__gu_err = -EINVAL;					\
+		/*__gu_err = -EINVAL;*/	__gu_err = __user_bad();	\
 	}								\
 	__gu_err;							\
 })
 
-#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)	\
-({							\
-__asm__ __volatile__ ("	lwi	%0, %1, 0;		\
-		1:	swi	%0, %2, 0;		\
-			lwi	%0, %1, 4;		\
-		2:	swi	%0, %2, 4;		\
-			addk	%0,r0,r0;		\
-		3:					\
-		.section .fixup,\"ax\";			\
-		4:	brid	3b;			\
-			addik	%0, r0, %3;		\
-		.previous;				\
-		.section __ex_table,\"a\";		\
-		.word	1b,4b,2b,4b;			\
-		.previous;"				\
-	: "=&r"(__gu_err)				\
-	: "r"(&__gu_val),				\
-	"r"(__gu_ptr), "i"(-EFAULT)			\
-	);						\
-})
+#ifndef CONFIG_MMU
 
-#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
-({								\
-	__asm__ __volatile__ (					\
-			"1:"	insn	" %1, %2, r0;		\
-				addk	%0, r0, r0;		\
-			2:					\
-			.section .fixup,\"ax\";			\
-			3:	brid	2b;			\
-				addik	%0, r0, %3;		\
-			.previous;				\
-			.section __ex_table,\"a\";		\
-			.word	1b,3b;				\
-			.previous;"				\
-		: "=r"(__gu_err)				\
-		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
-	);							\
-})
+#define put_user(x, ptr)	__put_user((x), (ptr))
 
-/*
- * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
- */
-static inline int clear_user(char *to, int size)
-{
-	if (size && access_ok(VERIFY_WRITE, to, size)) {
-		__asm__ __volatile__ ("				\
-				1:				\
-					sb	r0, %2, r0;	\
-					addik	%0, %0, -1;	\
-					bneid	%0, 1b;		\
-					addik	%2, %2, 1;	\
-				2:				\
-				.section __ex_table,\"a\";	\
-				.word	1b,2b;			\
-				.section .text;"		\
-			: "=r"(size)				\
-			: "0"(size), "r"(to)
-		);
-	}
-	return size;
-}
+#else /* CONFIG_MMU */
 
-#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+#define put_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
+		? __put_user((x), (ptr)) : -EFAULT;			\
+})
+#endif /* CONFIG_MMU */
+
+/* copy_to_from_user */
+#define __copy_from_user(to, from, n)	\
+	__copy_tofrom_user((__force void __user *)(to), \
+				(void __user *)(from), (n))
 #define __copy_from_user_inatomic(to, from, n) \
 		copy_from_user((to), (from), (n))
 
-#define copy_to_user(to, from, n)					\
-	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
-		__copy_tofrom_user((void __user *)(to),			\
-			(__force const void __user *)(from), (n))	\
-		: -EFAULT)
+static inline long copy_from_user(void *to,
+		const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_from_user(to, from, n);
+	return n;
+}
 
-#define __copy_to_user(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user(to, from, n)	\
+		__copy_tofrom_user((void __user *)(to), \
+			(__force const void __user *)(from), (n))
 #define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
 
-#define copy_from_user(to, from, n)					\
-	(access_ok(VERIFY_READ, (from), (n)) ?				\
-		__copy_tofrom_user((__force void __user *)(to),		\
-			(void __user *)(from), (n))			\
-		: -EFAULT)
+static inline long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_to_user(to, from, n);
+	return n;
+}
 
+/*
+ * Copy a null terminated string from userspace.
+ */
 extern int __strncpy_user(char *to, const char __user *from, int len);
-extern int __strnlen_user(const char __user *sstr, int len);
 
-#define strncpy_from_user(to, from, len)	\
-		(access_ok(VERIFY_READ, from, 1) ?	\
-			__strncpy_user(to, from, len) : -EFAULT)
-#define strnlen_user(str, len)	\
-		(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
+#define __strncpy_from_user	__strncpy_user
 
-#endif /* CONFIG_MMU */
-
-extern unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size);
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
 
 /*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
+ * Return the size of a string (including the ending 0)
  *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
+ * Return 0 on exception, a value greater than N if too long
  */
-struct exception_table_entry {
-	unsigned long insn, fixup;
-};
+extern int __strnlen_user(const char __user *sstr, int len);
+
+static inline long strnlen_user(const char __user *src, long n)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return __strnlen_user(src, n);
+}
 
 #endif  /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */

arch/microblaze/kernel/dma.c

@@ -38,7 +38,7 @@ static inline void __dma_sync_page(unsigned long paddr, unsigned long offset,
 
 static unsigned long get_dma_direct_offset(struct device *dev)
 {
-	if (dev)
+	if (likely(dev))
 		return (unsigned long)dev->archdata.dma_data;
 
 	return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */

arch/microblaze/kernel/head.S

@@ -51,6 +51,12 @@ swapper_pg_dir:
 
 	.text
 ENTRY(_start)
+#if CONFIG_KERNEL_BASE_ADDR == 0
+	brai	TOPHYS(real_start)
+	.org	0x100
+real_start:
+#endif
+
 	mfs	r1, rmsr
 	andi	r1, r1, ~2
 	mts	rmsr, r1
@@ -99,8 +105,8 @@ no_fdt_arg:
 	tophys(r4,r4)			/* convert to phys address */
 	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
 _copy_command_line:
-	lbu	r2, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
-	sb	r2, r4, r6		/* addr[r4+r6]= r7*/
+	lbu	r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */
+	sb	r2, r4, r6		/* addr[r4+r6]= r2*/
 	addik	r6, r6, 1		/* increment counting */
 	bgtid	r3, _copy_command_line	/* loop for all entries       */
 	addik	r3, r3, -1		/* descrement loop */
@@ -128,7 +134,7 @@ _copy_bram:
 	 * virtual to physical.
 	 */
 	nop
-	addik	r3, r0, 63		/* Invalidate all TLB entries */
+	addik	r3, r0, MICROBLAZE_TLB_SIZE -1	/* Invalidate all TLB entries */
 _invalidate:
 	mts	rtlbx, r3
 	mts	rtlbhi, r0			/* flush: ensure V is clear   */

arch/microblaze/kernel/hw_exception_handler.S

@@ -313,13 +313,13 @@ _hw_exception_handler:
 	mfs	r5, rmsr;
 	nop
 	swi	r5, r1, 0;
-	mfs	r3, resr
+	mfs	r4, resr
 	nop
-	mfs	r4, rear;
+	mfs	r3, rear;
 	nop
 
 #ifndef CONFIG_MMU
-	andi	r5, r3, 0x1000;		/* Check ESR[DS] */
+	andi	r5, r4, 0x1000;		/* Check ESR[DS] */
 	beqi	r5, not_in_delay_slot;	/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
@@ -327,13 +327,14 @@ not_in_delay_slot:
 	swi	r17, r1, PT_R17
 #endif
 
-	andi	r5, r3, 0x1F;		/* Extract ESR[EXC] */
+	andi	r5, r4, 0x1F;		/* Extract ESR[EXC] */
 
 #ifdef CONFIG_MMU
 	/* Calculate exception vector offset = r5 << 2 */
 	addk	r6, r5, r5; /* << 1 */
 	addk	r6, r6, r6; /* << 2 */
 
+#ifdef DEBUG
 /* counting which exception happen */
 	lwi	r5, r0, 0x200 + TOPHYS(r0_ram)
 	addi	r5, r5, 1
@@ -341,6 +342,7 @@ not_in_delay_slot:
 	lwi	r5, r6, 0x200 + TOPHYS(r0_ram)
 	addi	r5, r5, 1
 	swi	r5, r6, 0x200 + TOPHYS(r0_ram)
+#endif
 /* end */
 	/* Load the HW Exception vector */
 	lwi	r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
@@ -376,7 +378,7 @@ handle_other_ex: /* Handle Other exceptions here */
 	swi	r18, r1, PT_R18
 
 	or	r5, r1, r0
-	andi	r6, r3, 0x1F; /* Load ESR[EC] */
+	andi	r6, r4, 0x1F; /* Load ESR[EC] */
 	lwi	r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */
 	swi	r7, r1, PT_MODE
 	mfs	r7, rfsr
@@ -426,11 +428,11 @@ handle_other_ex: /* Handle Other exceptions here */
  */
 handle_unaligned_ex:
 	/* Working registers already saved: R3, R4, R5, R6
-	 *  R3 = ESR
-	 *  R4 = EAR
+	 *  R4 = ESR
+	 *  R3 = EAR
 	 */
 #ifdef CONFIG_MMU
-	andi	r6, r3, 0x1000			/* Check ESR[DS] */
+	andi	r6, r4, 0x1000			/* Check ESR[DS] */
 	beqi	r6, _no_delayslot		/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
@@ -439,7 +441,7 @@ _no_delayslot:
 	RESTORE_STATE;
 	bri	unaligned_data_trap
 #endif
-	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
+	andi	r6, r4, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
 	srl	r6, r6;
 	srl	r6, r6;
@@ -448,33 +450,33 @@ _no_delayslot:
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
 
-	andi	r6, r3, 0x400; /* Extract ESR[S] */
+	andi	r6, r4, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
 ex_lw:
-	andi	r6, r3, 0x800; /* Extract ESR[W] */
+	andi	r6, r4, 0x800; /* Extract ESR[W] */
 	beqi	r6, ex_lhw;
-	lbui	r5, r4, 0; /* Exception address in r4 */
+	lbui	r5, r3, 0; /* Exception address in r3 */
 	/* Load a word, byte-by-byte from destination address
 		and save it in tmp space */
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_0);
-	lbui	r5, r4, 1;
+	lbui	r5, r3, 1;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_1);
-	lbui	r5, r4, 2;
+	lbui	r5, r3, 2;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_2);
-	lbui	r5, r4, 3;
+	lbui	r5, r3, 3;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_3);
-	/* Get the destination register value into r3 */
-	lwi	r3, r0, TOPHYS(ex_tmp_data_loc_0);
+	/* Get the destination register value into r4 */
+	lwi	r4, r0, TOPHYS(ex_tmp_data_loc_0);
 	bri	ex_lw_tail;
 ex_lhw:
-	lbui	r5, r4, 0; /* Exception address in r4 */
+	lbui	r5, r3, 0; /* Exception address in r3 */
 	/* Load a half-word, byte-by-byte from destination
 		address and save it in tmp space */
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_0);
-	lbui	r5, r4, 1;
+	lbui	r5, r3, 1;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_1);
-	/* Get the destination register value into r3 */
-	lhui	r3, r0, TOPHYS(ex_tmp_data_loc_0);
+	/* Get the destination register value into r4 */
+	lhui	r4, r0, TOPHYS(ex_tmp_data_loc_0);
 ex_lw_tail:
 	/* Get the destination register number into r5 */
 	lbui	r5, r0, TOPHYS(ex_reg_op);
@@ -502,25 +504,25 @@ ex_sw_tail:
 	andi	r6, r6, 0x800; /* Extract ESR[W] */
 	beqi	r6, ex_shw;
 	/* Get the word - delay slot */
-	swi	r3, r0, TOPHYS(ex_tmp_data_loc_0);
+	swi	r4, r0, TOPHYS(ex_tmp_data_loc_0);
 	/* Store the word, byte-by-byte into destination address */
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_0);
-	sbi	r3, r4, 0;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_1);
-	sbi	r3, r4, 1;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_2);
-	sbi	r3, r4, 2;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_3);
-	sbi	r3, r4, 3;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_0);
+	sbi	r4, r3, 0;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_1);
+	sbi	r4, r3, 1;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_2);
+	sbi	r4, r3, 2;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_3);
+	sbi	r4, r3, 3;
 	bri	ex_handler_done;
 
 ex_shw:
 	/* Store the lower half-word, byte-by-byte into destination address */
-	swi	r3, r0, TOPHYS(ex_tmp_data_loc_0);
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_2);
-	sbi	r3, r4, 0;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_3);
-	sbi	r3, r4, 1;
+	swi	r4, r0, TOPHYS(ex_tmp_data_loc_0);
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_2);
+	sbi	r4, r3, 0;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_3);
+	sbi	r4, r3, 1;
 ex_sw_end: /* Exception handling of store word, ends. */
 
 ex_handler_done:
@@ -560,21 +562,16 @@ ex_handler_done:
 		 */
 		mfs	r11, rpid
 		nop
-		bri	4
-		mfs	r3, rear		/* Get faulting address */
-		nop
 		/* If we are faulting a kernel address, we have to use the
 		 * kernel page tables.
 		 */
-		ori	r4, r0, CONFIG_KERNEL_START
-		cmpu	r4, r3, r4
-		bgti	r4, ex3
+		ori	r5, r0, CONFIG_KERNEL_START
+		cmpu	r5, r3, r5
+		bgti	r5, ex3
 		/* First, check if it was a zone fault (which means a user
 		 * tried to access a kernel or read-protected page - always
 		 * a SEGV). All other faults here must be stores, so no
 		 * need to check ESR_S as well. */
-		mfs	r4, resr
-		nop
 		andi	r4, r4, 0x800		/* ESR_Z - zone protection */
 		bnei	r4, ex2
 
@@ -589,8 +586,6 @@ ex_handler_done:
 		 * tried to access a kernel or read-protected page - always
 		 * a SEGV). All other faults here must be stores, so no
 		 * need to check ESR_S as well. */
-		mfs	r4, resr
-		nop
 		andi	r4, r4, 0x800		/* ESR_Z */
 		bnei	r4, ex2
 		/* get current task address */
@@ -665,8 +660,6 @@ ex_handler_done:
 		 * R3 = ESR
 		 */
 
-		mfs	r3, rear		/* Get faulting address */
-		nop
 		RESTORE_STATE;
 		bri	page_fault_instr_trap
 
@@ -677,18 +670,15 @@ ex_handler_done:
 	 */
 	handle_data_tlb_miss_exception:
 		/* Working registers already saved: R3, R4, R5, R6
-		 * R3 = ESR
+		 * R3 = EAR, R4 = ESR
 		 */
 		mfs	r11, rpid
 		nop
-		bri	4
-		mfs	r3, rear		/* Get faulting address */
-		nop
 
 		/* If we are faulting a kernel address, we have to use the
 		 * kernel page tables. */
-		ori	r4, r0, CONFIG_KERNEL_START
-		cmpu	r4, r3, r4
+		ori	r6, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r6
 		bgti	r4, ex5
 		ori	r4, r0, swapper_pg_dir
 		mts	rpid, r0		/* TLB will have 0 TID */
@@ -731,9 +721,8 @@ ex_handler_done:
 		 * Many of these bits are software only. Bits we don't set
 		 * here we (properly should) assume have the appropriate value.
 		 */
+		brid	finish_tlb_load
 		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
-
-		bri	finish_tlb_load
 	ex7:
 		/* The bailout. Restore registers to pre-exception conditions
 		 * and call the heavyweights to help us out.
@@ -754,9 +743,6 @@ ex_handler_done:
 		 */
 		mfs	r11, rpid
 		nop
-		bri	4
-		mfs	r3, rear		/* Get faulting address */
-		nop
 
 		/* If we are faulting a kernel address, we have to use the
 		 * kernel page tables.
@@ -792,7 +778,7 @@ ex_handler_done:
 		lwi	r4, r5, 0		/* Get Linux PTE */
 
 		andi	r6, r4, _PAGE_PRESENT
-		beqi	r6, ex7
+		beqi	r6, ex10
 
 		ori	r4, r4, _PAGE_ACCESSED
 		swi	r4, r5, 0
@@ -805,9 +791,8 @@ ex_handler_done:
 		 * Many of these bits are software only. Bits we don't set
 		 * here we (properly should) assume have the appropriate value.
 		 */
+		brid	finish_tlb_load
 		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
-
-		bri	finish_tlb_load
 	ex10:
 		/* The bailout. Restore registers to pre-exception conditions
 		 * and call the heavyweights to help us out.
@@ -837,9 +822,9 @@ ex_handler_done:
 		andi	r5, r5, (MICROBLAZE_TLB_SIZE-1)
 		ori	r6, r0, 1
 		cmp	r31, r5, r6
-		blti	r31, sem
+		blti	r31, ex12
 		addik	r5, r6, 1
-	sem:
+	ex12:
 		/* MS: save back current TLB index */
 		swi	r5, r0, TOPHYS(tlb_index)
 
@@ -859,7 +844,6 @@ ex_handler_done:
 		nop
 
 		/* Done...restore registers and get out of here. */
-	ex12:
 		mts	rpid, r11
 		nop
 		bri 4

arch/microblaze/kernel/misc.S

@@ -26,9 +26,10 @@
  * We avoid flushing the pinned 0, 1 and possibly 2 entries.
  */
 .globl _tlbia;
+.type  _tlbia, @function
 .align 4;
 _tlbia:
-	addik	r12, r0, 63 /* flush all entries (63 - 3) */
+	addik	r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */
 	/* isync */
 _tlbia_1:
 	mts	rtlbx, r12
@@ -41,11 +42,13 @@ _tlbia_1:
 	/* sync */
 	rtsd	r15, 8
 	nop
+	.size  _tlbia, . - _tlbia
 
 /*
  * Flush MMU TLB for a particular address (in r5)
  */
 .globl _tlbie;
+.type  _tlbie, @function
 .align 4;
 _tlbie:
 	mts	rtlbsx, r5 /* look up the address in TLB */
@@ -59,17 +62,20 @@ _tlbie_1:
 	rtsd	r15, 8
 	nop
 
+	.size  _tlbie, . - _tlbie
+
 /*
  * Allocate TLB entry for early console
  */
 .globl early_console_reg_tlb_alloc;
+.type  early_console_reg_tlb_alloc, @function
 .align 4;
 early_console_reg_tlb_alloc:
 	/*
 	 * Load a TLB entry for the UART, so that microblaze_progress() can use
 	 * the UARTs nice and early.  We use a 4k real==virtual mapping.
 	 */
-	ori	r4, r0, 63
+	ori	r4, r0, MICROBLAZE_TLB_SIZE - 1
 	mts	rtlbx, r4 /* TLB slot 2 */
 
 	or	r4,r5,r0
@@ -86,6 +92,8 @@ early_console_reg_tlb_alloc:
 	rtsd	r15, 8
 	nop
 
+	.size  early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc
+
 /*
  * Copy a whole page (4096 bytes).
  */
@@ -104,6 +112,7 @@ early_console_reg_tlb_alloc:
 #define DCACHE_LINE_BYTES (4 * 4)
 
 .globl copy_page;
+.type  copy_page, @function
 .align 4;
 copy_page:
 	ori	r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
@@ -118,3 +127,5 @@ _copy_page_loop:
 	addik	r11, r11, -1
 	rtsd	r15, 8
 	nop
+
+	.size  copy_page, . - copy_page

arch/microblaze/kernel/process.c

@@ -15,6 +15,7 @@
 #include <linux/bitops.h>
 #include <asm/system.h>
 #include <asm/pgalloc.h>
+#include <asm/uaccess.h> /* for USER_DS macros */
 #include <asm/cacheflush.h>
 
 void show_regs(struct pt_regs *regs)
@@ -74,7 +75,10 @@ __setup("hlt", hlt_setup);
 
 void default_idle(void)
 {
-	if (!hlt_counter) {
+	if (likely(hlt_counter)) {
+		while (!need_resched())
+			cpu_relax();
+	} else {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
 		smp_mb__after_clear_bit();
 		local_irq_disable();
@@ -82,9 +86,7 @@ void default_idle(void)
 			cpu_sleep();
 		local_irq_enable();
 		set_thread_flag(TIF_POLLING_NRFLAG);
-	} else
-		while (!need_resched())
-			cpu_relax();
+	}
 }
 
 void cpu_idle(void)

arch/microblaze/kernel/setup.c

@@ -92,6 +92,12 @@ inline unsigned get_romfs_len(unsigned *addr)
 }
 #endif	/* CONFIG_MTD_UCLINUX_EBSS */
 
+#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
+#define eprintk early_printk
+#else
+#define eprintk printk
+#endif
+
 void __init machine_early_init(const char *cmdline, unsigned int ram,
 		unsigned int fdt, unsigned int msr)
 {
@@ -139,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	setup_early_printk(NULL);
 #endif
 
-	early_printk("Ramdisk addr 0x%08x, ", ram);
+	eprintk("Ramdisk addr 0x%08x, ", ram);
 	if (fdt)
-		early_printk("FDT at 0x%08x\n", fdt);
+		eprintk("FDT at 0x%08x\n", fdt);
 	else
-		early_printk("Compiled-in FDT at 0x%08x\n",
+		eprintk("Compiled-in FDT at 0x%08x\n",
 					(unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
-	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+	eprintk("Found romfs @ 0x%08x (0x%08x)\n",
 			romfs_base, romfs_size);
-	early_printk("#### klimit %p ####\n", old_klimit);
+	eprintk("#### klimit %p ####\n", old_klimit);
 	BUG_ON(romfs_size < 0); /* What else can we do? */
 
-	early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+	eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
 			romfs_size, romfs_base, (unsigned)&_ebss);
 
-	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
+	eprintk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	if (msr)
-		early_printk("!!!Your kernel has setup MSR instruction but "
+		eprintk("!!!Your kernel has setup MSR instruction but "
 				"CPU don't have it %d\n", msr);
 #else
 	if (!msr)
-		early_printk("!!!Your kernel not setup MSR instruction but "
+		eprintk("!!!Your kernel not setup MSR instruction but "
 				"CPU have it %d\n", msr);
 #endif
 

arch/microblaze/kernel/traps.c

@@ -22,13 +22,11 @@ void trap_init(void)
 	__enable_hw_exceptions();
 }
 
-static int kstack_depth_to_print = 24;
+static unsigned long kstack_depth_to_print = 24;
 
 static int __init kstack_setup(char *s)
 {
-	kstack_depth_to_print = strict_strtoul(s, 0, NULL);
-
-	return 1;
+	return !strict_strtoul(s, 0, &kstack_depth_to_print);
 }
 __setup("kstack=", kstack_setup);
 

arch/microblaze/lib/Makefile

@@ -10,5 +10,4 @@ else
 lib-y += memcpy.o memmove.o
 endif
 
-lib-$(CONFIG_NO_MMU) += uaccess.o
-lib-$(CONFIG_MMU) += uaccess_old.o
+lib-y += uaccess_old.o

arch/microblaze/lib/fastcopy.S

@@ -30,8 +30,9 @@
  */
 
 #include <linux/linkage.h>
-
+	.text
 	.globl	memcpy
+	.type  memcpy, @function
 	.ent	memcpy
 
 memcpy:
@@ -345,9 +346,11 @@ a_done:
 	rtsd	r15, 8
 	nop
 
+.size  memcpy, . - memcpy
 .end memcpy
 /*----------------------------------------------------------------------------*/
 	.globl	memmove
+	.type  memmove, @function
 	.ent	memmove
 
 memmove:
@@ -659,4 +662,5 @@ d_done:
 	rtsd	r15, 8
 	nop
 
+.size  memmove, . - memmove
 .end memmove

arch/microblaze/lib/memcpy.c

@@ -53,7 +53,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 	const uint32_t *i_src;
 	uint32_t *i_dst;
 
-	if (c >= 4) {
+	if (likely(c >= 4)) {
 		unsigned  value, buf_hold;
 
 		/* Align the dstination to a word boundry. */

arch/microblaze/lib/memset.c

@@ -33,22 +33,23 @@
 #ifdef __HAVE_ARCH_MEMSET
 void *memset(void *v_src, int c, __kernel_size_t n)
 {
-
 	char *src = v_src;
 #ifdef CONFIG_OPT_LIB_FUNCTION
 	uint32_t *i_src;
-	uint32_t w32;
+	uint32_t w32 = 0;
 #endif
 	/* Truncate c to 8 bits */
 	c = (c & 0xFF);
 
 #ifdef CONFIG_OPT_LIB_FUNCTION
-	/* Make a repeating word out of it */
-	w32 = c;
-	w32 |= w32 << 8;
-	w32 |= w32 << 16;
+	if (unlikely(c)) {
+		/* Make a repeating word out of it */
+		w32 = c;
+		w32 |= w32 << 8;
+		w32 |= w32 << 16;
+	}
 
-	if (n >= 4) {
+	if (likely(n >= 4)) {
 		/* Align the destination to a word boundary */
 		/* This is done in an endian independant manner */
 		switch ((unsigned) src & 3) {

arch/microblaze/lib/uaccess.c

-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/string.h>
-#include <asm/uaccess.h>
-
-#include <asm/bug.h>
-
-long strnlen_user(const char __user *src, long count)
-{
-	return strlen(src) + 1;
-}
-
-#define __do_strncpy_from_user(dst, src, count, res)			\
-	do {								\
-		char *tmp;						\
-		strncpy(dst, src, count);				\
-		for (tmp = dst; *tmp && count > 0; tmp++, count--)	\
-			;						\
-		res = (tmp - dst);					\
-	} while (0)
-
-long __strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-
-unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size)
-{
-	memcpy(to, from, size);
-	return 0;
-}

arch/microblaze/lib/uaccess_old.S

@@ -22,6 +22,7 @@
 
 	.text
 .globl __strncpy_user;
+.type  __strncpy_user, @function
 .align 4;
 __strncpy_user:
 
@@ -50,7 +51,7 @@ __strncpy_user:
 3:
 	rtsd	r15,8
 	nop
-
+	.size   __strncpy_user, . - __strncpy_user
 
 	.section	.fixup, "ax"
 	.align	2
@@ -72,6 +73,7 @@ __strncpy_user:
 
 	.text
 .globl __strnlen_user;
+.type  __strnlen_user, @function
 .align 4;
 __strnlen_user:
 	addik	r3,r6,0
@@ -90,7 +92,7 @@ __strnlen_user:
 3:
 	rtsd	r15,8
 	nop
-
+	.size   __strnlen_user, . - __strnlen_user
 
 	.section	.fixup,"ax"
 4:
@@ -108,6 +110,7 @@ __strnlen_user:
  */
 	.text
 .globl __copy_tofrom_user;
+.type  __copy_tofrom_user, @function
 .align 4;
 __copy_tofrom_user:
 	/*
@@ -116,20 +119,34 @@ __copy_tofrom_user:
 	 * r7, r3 - count
 	 * r4 - tempval
 	 */
-	addik	r3,r7,0
-	beqi	r3,3f
-1:
-	lbu	r4,r6,r0
-	addik	r6,r6,1
-2:
-	sb	r4,r5,r0
-	addik	r3,r3,-1
-	bneid	r3,1b
-	addik	r5,r5,1		/* delay slot */
+	beqid	r7, 3f /* zero size is not likely */
+	andi	r3, r7, 0x3 /* filter add count */
+	bneid	r3, 4f /* if is odd value then byte copying */
+	or	r3, r5, r6 /* find if is any to/from unaligned */
+	andi	r3, r3, 0x3 /* mask unaligned */
+	bneid	r3, 1f /* it is unaligned -> then jump */
+	or	r3, r0, r0
+
+/* at least one 4 byte copy */
+5:	lw	r4, r6, r3
+6:	sw	r4, r5, r3
+	addik	r7, r7, -4
+	bneid	r7, 5b
+	addik	r3, r3, 4
+	addik	r3, r7, 0
+	rtsd	r15, 8
+	nop
+4:	or	r3, r0, r0
+1:	lbu	r4,r6,r3
+2:	sb	r4,r5,r3
+	addik	r7,r7,-1
+	bneid	r7,1b
+	addik	r3,r3,1		/* delay slot */
 3:
+	addik	r3,r7,0
 	rtsd	r15,8
 	nop
-
+	.size   __copy_tofrom_user, . - __copy_tofrom_user
 
 	.section	__ex_table,"a"
-	.word	1b,3b,2b,3b
+	.word	1b,3b,2b,3b,5b,3b,6b,3b

arch/microblaze/mm/fault.c

@@ -106,7 +106,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	regs->esr = error_code;
 
 	/* On a kernel SLB miss we can only check for a valid exception entry */
-	if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+	if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) {
 		printk(KERN_WARNING "kernel task_size exceed");
 		_exception(SIGSEGV, regs, code, address);
 	}
@@ -122,7 +122,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 #endif /* CONFIG_KGDB */
 
-	if (in_atomic() || !mm) {
+	if (unlikely(in_atomic() || !mm)) {
 		if (kernel_mode(regs))
 			goto bad_area_nosemaphore;
 
@@ -150,7 +150,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * source.  If this is invalid we can skip the address space check,
 	 * thus avoiding the deadlock.
 	 */
-	if (!down_read_trylock(&mm->mmap_sem)) {
+	if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
 		if (kernel_mode(regs) && !search_exception_tables(regs->pc))
 			goto bad_area_nosemaphore;
 
@@ -158,16 +158,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 
 	vma = find_vma(mm, address);
-	if (!vma)
+	if (unlikely(!vma))
 		goto bad_area;
 
 	if (vma->vm_start <= address)
 		goto good_area;
 
-	if (!(vma->vm_flags & VM_GROWSDOWN))
+	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
 		goto bad_area;
 
-	if (!is_write)
+	if (unlikely(!is_write))
 		goto bad_area;
 
 	/*
@@ -179,7 +179,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * before setting the user r1.  Thus we allow the stack to
 	 * expand to 1MB without further checks.
 	 */
-	if (address + 0x100000 < vma->vm_end) {
+	if (unlikely(address + 0x100000 < vma->vm_end)) {
 
 		/* get user regs even if this fault is in kernel mode */
 		struct pt_regs *uregs = current->thread.regs;
@@ -209,15 +209,15 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	code = SEGV_ACCERR;
 
 	/* a write */
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
+	if (unlikely(is_write)) {
+		if (unlikely(!(vma->vm_flags & VM_WRITE)))
 			goto bad_area;
 	/* a read */
 	} else {
 		/* protection fault */
-		if (error_code & 0x08000000)
+		if (unlikely(error_code & 0x08000000))
 			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+		if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC))))
 			goto bad_area;
 	}
 
@@ -235,7 +235,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (unlikely(fault & VM_FAULT_MAJOR))
 		current->maj_flt++;
 	else
 		current->min_flt++;

arch/microblaze/mm/init.c

@@ -166,7 +166,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	for (addr = begin; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
-		memset((void *)addr, 0xcc, PAGE_SIZE);
 		free_page(addr);
 		totalram_pages++;
 	}
@@ -209,14 +208,6 @@ void __init mem_init(void)
 }
 
 #ifndef CONFIG_MMU
-/* Check against bounds of physical memory */
-int ___range_ok(unsigned long addr, unsigned long size)
-{
-	return ((addr < memory_start) ||
-		((addr + size) > memory_end));
-}
-EXPORT_SYMBOL(___range_ok);
-
 int page_is_ram(unsigned long pfn)
 {
 	return __range_ok(pfn, 0);

arch/microblaze/mm/pgtable.c

@@ -154,7 +154,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 		err = 0;
 		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
 				__pgprot(flags)));
-		if (mem_init_done)
+		if (unlikely(mem_init_done))
 			flush_HPTE(0, va, pmd_val(*pd));
 			/* flush_HPTE(0, va, pg); */
 	}

arch/powerpc/kernel/misc.S

@@ -128,7 +128,6 @@ _GLOBAL(__restore_cpu_power7)
 	/* place holder */
 	blr
 
-#ifdef CONFIG_EVENT_TRACING
 /*
  * Get a minimal set of registers for our caller's nth caller.
  * r3 = regs pointer, r5 = n.
@@ -154,4 +153,3 @@ _GLOBAL(perf_arch_fetch_caller_regs)
 	PPC_STL	r4,_NIP-STACK_FRAME_OVERHEAD(r3)
 	PPC_STL	r7,_LINK-STACK_FRAME_OVERHEAD(r3)
 	blr
-#endif /* CONFIG_EVENT_TRACING */

arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c

@@ -481,6 +481,8 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
 	if (rc)
 		goto err_bcom_rx_irq;
 
+	lpbfifo.dma_irqs_enabled = 1;
+
 	/* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
 	lpbfifo.bcom_tx_task =
 		bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,

arch/sh/configs/ecovec24_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:20:36 2010
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 02:21:58 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,14 +74,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -107,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -116,13 +113,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -234,12 +231,12 @@ CONFIG_CPU_SUBTYPE_SH7724=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -247,6 +244,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -262,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -337,7 +336,6 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -347,7 +345,7 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_OVERWRITE=y
 # CONFIG_CMDLINE_EXTEND is not set
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
 
 #
 # Bus options
@@ -373,6 +371,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -380,7 +379,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -445,7 +443,45 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+CONFIG_SH_SIR=y
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
@@ -556,6 +592,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -597,6 +634,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -616,6 +654,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -768,7 +807,29 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -802,10 +863,10 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
@@ -830,6 +891,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -843,15 +905,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -882,13 +938,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -919,23 +978,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
+CONFIG_MFD_SH_MOBILE_SDHI=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
@@ -985,10 +1047,10 @@ CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
 # CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
+CONFIG_SOC_CAMERA_MT9T112=y
 # CONFIG_SOC_CAMERA_MT9V022 is not set
 # CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_TW9910=y
 # CONFIG_SOC_CAMERA_PLATFORM is not set
 # CONFIG_SOC_CAMERA_OV772X is not set
 # CONFIG_SOC_CAMERA_OV9640 is not set
@@ -1001,6 +1063,7 @@ CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_SI470X is not set
 # CONFIG_USB_MR800 is not set
 # CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
 # CONFIG_RADIO_TEF6862 is not set
 # CONFIG_DAB is not set
 
@@ -1034,6 +1097,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_TMIO is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
@@ -1062,7 +1126,46 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_SND_FSI_AK4642 is not set
+CONFIG_SND_FSI_DA7210=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_DA7210=y
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HIDRAW is not set
@@ -1077,6 +1180,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
@@ -1091,12 +1195,16 @@ CONFIG_USB_HID=y
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1136,6 +1244,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1188,7 +1297,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1200,8 +1308,45 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
@@ -1224,10 +1369,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MMC_TMIO is not set
+CONFIG_MMC_TMIO=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1253,10 +1396,10 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_BQ32K is not set
@@ -1303,8 +1446,6 @@ CONFIG_RTC_DRV_PCF8563=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1390,6 +1531,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1418,6 +1560,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1487,6 +1630,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1618,7 +1762,7 @@ CONFIG_CRYPTO_HW=y
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y

arch/sh/include/asm/elf.h

@@ -211,7 +211,9 @@ extern void __kernel_vsyscall;
 
 #define VSYSCALL_AUX_ENT					\
 	if (vdso_enabled)					\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);	\
+	else							\
+		NEW_AUX_ENT(AT_IGNORE, 0);
 #else
 #define VSYSCALL_AUX_ENT
 #endif /* CONFIG_VSYSCALL */
@@ -219,7 +221,7 @@ extern void __kernel_vsyscall;
 #ifdef CONFIG_SH_FPU
 #define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
 #else
-#define FPU_AUX_ENT
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
 #endif
 
 extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;

arch/sh/include/cpu-sh4/cpu/mmu_context.h

@@ -30,6 +30,8 @@
 #define MMUCR_URB		0x00FC0000
 #define MMUCR_URB_SHIFT		18
 #define MMUCR_URB_NENTRIES	64
+#define MMUCR_URC		0x0000FC00
+#define MMUCR_URC_SHIFT		10
 
 #if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
 #define MMUCR_SE		(1 << 4)

arch/sh/kernel/cpufreq.c

@@ -48,7 +48,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy,
 		return -ENODEV;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	BUG_ON(smp_processor_id() != cpu);
 
@@ -66,7 +66,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy,
 	freqs.flags	= 0;
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 	clk_set_rate(cpuclk, freq);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 

arch/sh/kernel/return_address.c

@@ -9,6 +9,7 @@
  * for more details.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <asm/dwarf.h>
 
 #ifdef CONFIG_DWARF_UNWINDER
@@ -52,3 +53,5 @@ void *return_address(unsigned int depth)
 }
 
 #endif
+
+EXPORT_SYMBOL_GPL(return_address);

arch/sh/kernel/smp.c

@@ -69,6 +69,7 @@ asmlinkage void __cpuinit start_secondary(void)
 	unsigned int cpu;
 	struct mm_struct *mm = &init_mm;
 
+	enable_mmu();
 	atomic_inc(&mm->mm_count);
 	atomic_inc(&mm->mm_users);
 	current->active_mm = mm;

arch/sh/mm/tlb-pteaex.c

@@ -77,3 +77,31 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	__raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
 	back_to_cached();
 }
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+	int i;
+
+	/*
+	 * Flush all the TLB.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	status = __raw_readl(MMUCR);
+	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+	if (status == 0)
+		status = MMUCR_URB_NENTRIES;
+
+	for (i = 0; i < status; i++)
+		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+	back_to_cached();
+	ctrl_barrier();
+	local_irq_restore(flags);
+}

arch/sh/mm/tlb-sh3.c

@@ -77,3 +77,22 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	for (i = 0; i < ways; i++)
 		__raw_writel(data, addr + (i << 8));
 }
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+
+	/*
+	 * Flush all the TLB.
+	 *
+	 * Write to the MMU control register's bit:
+	 *	TF-bit for SH-3, TI-bit for SH-4.
+	 *      It's same position, bit #2.
+	 */
+	local_irq_save(flags);
+	status = __raw_readl(MMUCR);
+	status |= 0x04;
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+	local_irq_restore(flags);
+}

arch/sh/mm/tlb-sh4.c

@@ -80,3 +80,31 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	__raw_writel(data, addr);
 	back_to_cached();
 }
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+	int i;
+
+	/*
+	 * Flush all the TLB.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	status = __raw_readl(MMUCR);
+	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+	if (status == 0)
+		status = MMUCR_URB_NENTRIES;
+
+	for (i = 0; i < status; i++)
+		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+	back_to_cached();
+	ctrl_barrier();
+	local_irq_restore(flags);
+}

arch/sh/mm/tlb-urb.c

@@ -24,13 +24,9 @@ void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	local_irq_save(flags);
 
-	/* Load the entry into the TLB */
-	__update_tlb(vma, addr, pte);
-
-	/* ... and wire it up. */
 	status = __raw_readl(MMUCR);
 	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
-	status &= ~MMUCR_URB;
+	status &= ~MMUCR_URC;
 
 	/*
 	 * Make sure we're not trying to wire the last TLB entry slot.
@@ -39,7 +35,23 @@ void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	urb = urb % MMUCR_URB_NENTRIES;
 
+	/*
+	 * Insert this entry into the highest non-wired TLB slot (via
+	 * the URC field).
+	 */
+	status |= (urb << MMUCR_URC_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	/* Load the entry into the TLB */
+	__update_tlb(vma, addr, pte);
+
+	/* ... and wire it up. */
+	status = __raw_readl(MMUCR);
+
+	status &= ~MMUCR_URB;
 	status |= (urb << MMUCR_URB_SHIFT);
+
 	__raw_writel(status, MMUCR);
 	ctrl_barrier();
 

arch/sh/mm/tlbflush_32.c

@@ -119,31 +119,3 @@ void local_flush_tlb_mm(struct mm_struct *mm)
 		local_irq_restore(flags);
 	}
 }
-
-void local_flush_tlb_all(void)
-{
-	unsigned long flags, status;
-	int i;
-
-	/*
-	 * Flush all the TLB.
-	 */
-	local_irq_save(flags);
-	jump_to_uncached();
-
-	status = __raw_readl(MMUCR);
-	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
-	if (status == 0)
-		status = MMUCR_URB_NENTRIES;
-
-	for (i = 0; i < status; i++)
-		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
-	for (i = 0; i < 4; i++)
-		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
-	back_to_cached();
-	ctrl_barrier();
-	local_irq_restore(flags);
-}

arch/sparc/configs/sparc64_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Wed Mar  3 02:54:29 2010
+# Linux kernel version: 2.6.34-rc3
+# Sat Apr  3 15:49:56 2010
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -23,6 +23,7 @@ CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
 CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -439,6 +440,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -511,6 +513,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -888,6 +891,7 @@ CONFIG_SERIAL_SUNHV=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -935,6 +939,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -948,15 +953,9 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -982,10 +981,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1052,18 +1052,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1113,6 +1116,7 @@ CONFIG_FB_FFB=y
 # CONFIG_FB_LEO is not set
 CONFIG_FB_XVR500=y
 CONFIG_FB_XVR2500=y
+CONFIG_FB_XVR1000=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
@@ -1430,7 +1434,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1443,7 +1446,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1610,6 +1612,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1624,6 +1627,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set

arch/sparc/kernel/helpers.S

@@ -46,6 +46,81 @@ stack_trace_flush:
 	 nop
 	.size		stack_trace_flush,.-stack_trace_flush
 
+#ifdef CONFIG_PERF_EVENTS
+	.globl		perf_arch_fetch_caller_regs
+	.type		perf_arch_fetch_caller_regs,#function
+perf_arch_fetch_caller_regs:
+	/* We always read the %pstate into %o5 since we will use
+	 * that to construct a fake %tstate to store into the regs.
+	 */
+	rdpr		%pstate, %o5
+	brz,pn		%o2, 50f
+	 mov		%o2, %g7
+
+	/* Turn off interrupts while we walk around the register
+	 * window by hand.
+	 */
+	wrpr		%o5, PSTATE_IE, %pstate
+
+	/* The %canrestore tells us how many register windows are
+	 * still live in the chip above us, past that we have to
+	 * walk the frame as saved on the stack.   We stash away
+	 * the %cwp in %g1 so we can return back to the original
+	 * register window.
+	 */
+	rdpr		%cwp, %g1
+	rdpr		%canrestore, %g2
+	sub		%g1, 1, %g3
+
+	/* We have the skip count in %g7, if it hits zero then
+	 * %fp/%i7 are the registers we need.  Otherwise if our
+	 * %canrestore count maintained in %g2 hits zero we have
+	 * to start traversing the stack.
+	 */
+10:	brz,pn		%g2, 4f
+	 sub		%g2, 1, %g2
+	wrpr		%g3, %cwp
+	subcc		%g7, 1, %g7
+	bne,pt		%xcc, 10b
+	 sub		%g3, 1, %g3
+
+	/* We found the values we need in the cpu's register
+	 * windows.
+	 */
+	mov		%fp, %g3
+	ba,pt		%xcc, 3f
+	 mov		%i7, %g2
+
+50:	mov		%fp, %g3
+	ba,pt		%xcc, 2f
+	 mov		%i7, %g2
+
+	/* We hit the end of the valid register windows in the
+	 * cpu, start traversing the stack frame.
+	 */
+4:	mov		%fp, %g3
+
+20:	ldx		[%g3 + STACK_BIAS + RW_V9_I7], %g2
+	subcc		%g7, 1, %g7
+	bne,pn		%xcc, 20b
+	 ldx		[%g3 + STACK_BIAS + RW_V9_I6], %g3
+
+	/* Restore the current register window position and
+	 * re-enable interrupts.
+	 */
+3:	wrpr		%g1, %cwp
+	wrpr		%o5, %pstate
+
+2:	stx		%g3, [%o0 + PT_V9_FP]
+	sllx		%o5, 8, %o5
+	stx		%o5, [%o0 + PT_V9_TSTATE]
+	stx		%g2, [%o0 + PT_V9_TPC]
+	add		%g2, 4, %g2
+	retl
+	 stx		%g2, [%o0 + PT_V9_TNPC]
+	.size		perf_arch_fetch_caller_regs,.-perf_arch_fetch_caller_regs
+#endif /* CONFIG_PERF_EVENTS */
+
 #ifdef CONFIG_SMP
 	.globl		hard_smp_processor_id
 	.type		hard_smp_processor_id,#function

arch/sparc/kernel/ptrace_32.c

@@ -65,6 +65,7 @@ static int genregs32_get(struct task_struct *target,
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (get_user(*k++, &reg_window[pos++]))
 				return -EFAULT;
@@ -76,6 +77,7 @@ static int genregs32_get(struct task_struct *target,
 		}
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (get_user(reg, &reg_window[pos++]) ||
 			    put_user(reg, u++))
@@ -141,6 +143,7 @@ static int genregs32_set(struct task_struct *target,
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (put_user(*k++, &reg_window[pos++]))
 				return -EFAULT;
@@ -153,6 +156,7 @@ static int genregs32_set(struct task_struct *target,
 		}
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (get_user(reg, u++) ||
 			    put_user(reg, &reg_window[pos++]))

arch/sparc/kernel/ptrace_64.c

@@ -492,6 +492,7 @@ static int genregs32_get(struct task_struct *target,
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (get_user(*k++, &reg_window[pos++]))
@@ -516,6 +517,7 @@ static int genregs32_get(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (get_user(reg, &reg_window[pos++]) ||
@@ -599,6 +601,7 @@ static int genregs32_set(struct task_struct *target,
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (put_user(*k++, &reg_window[pos++]))
@@ -625,6 +628,7 @@ static int genregs32_set(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (get_user(reg, u++) ||

arch/sparc/mm/init_64.c

@@ -2117,7 +2117,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
 			       "node=%d entry=%lu/%lu\n", start, block, nr,
 			       node,
 			       addr >> VMEMMAP_CHUNK_SHIFT,
-			       VMEMMAP_SIZE >> VMEMMAP_CHUNK_SHIFT);
+			       VMEMMAP_SIZE);
 		}
 	}
 	return 0;

arch/x86/kernel/cpu/perf_event.c

@@ -29,6 +29,7 @@
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
 #include <asm/nmi.h>
+#include <asm/compat.h>
 
 static u64 perf_event_mask __read_mostly;
 
@@ -159,7 +160,7 @@ struct x86_pmu {
 						 struct perf_event *event);
 	struct event_constraint *event_constraints;
 
-	void		(*cpu_prepare)(int cpu);
+	int		(*cpu_prepare)(int cpu);
 	void		(*cpu_starting)(int cpu);
 	void		(*cpu_dying)(int cpu);
 	void		(*cpu_dead)(int cpu);
@@ -1334,11 +1335,12 @@ static int __cpuinit
 x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (long)hcpu;
+	int ret = NOTIFY_OK;
 
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_UP_PREPARE:
 		if (x86_pmu.cpu_prepare)
-			x86_pmu.cpu_prepare(cpu);
+			ret = x86_pmu.cpu_prepare(cpu);
 		break;
 
 	case CPU_STARTING:
@@ -1351,6 +1353,7 @@ x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
 			x86_pmu.cpu_dying(cpu);
 		break;
 
+	case CPU_UP_CANCELED:
 	case CPU_DEAD:
 		if (x86_pmu.cpu_dead)
 			x86_pmu.cpu_dead(cpu);
@@ -1360,7 +1363,7 @@ x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
 		break;
 	}
 
-	return NOTIFY_OK;
+	return ret;
 }
 
 static void __init pmu_check_apic(void)
@@ -1629,14 +1632,42 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 	return len;
 }
 
-static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
+#ifdef CONFIG_COMPAT
+static inline int
+perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
-	unsigned long bytes;
+	/* 32-bit process in 64-bit kernel. */
+	struct stack_frame_ia32 frame;
+	const void __user *fp;
 
-	bytes = copy_from_user_nmi(frame, fp, sizeof(*frame));
+	if (!test_thread_flag(TIF_IA32))
+		return 0;
+
+	fp = compat_ptr(regs->bp);
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		unsigned long bytes;
+		frame.next_frame     = 0;
+		frame.return_address = 0;
+
+		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+		if (bytes != sizeof(frame))
+			break;
+
+		if (fp < compat_ptr(regs->sp))
+			break;
 
-	return bytes == sizeof(*frame);
+		callchain_store(entry, frame.return_address);
+		fp = compat_ptr(frame.next_frame);
+	}
+	return 1;
+}
+#else
+static inline int
+perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+    return 0;
 }
+#endif
 
 static void
 perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
@@ -1652,11 +1683,16 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
 	callchain_store(entry, PERF_CONTEXT_USER);
 	callchain_store(entry, regs->ip);
 
+	if (perf_callchain_user32(regs, entry))
+		return;
+
 	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		unsigned long bytes;
 		frame.next_frame	     = NULL;
 		frame.return_address = 0;
 
-		if (!copy_stack_frame(fp, &frame))
+		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+		if (bytes != sizeof(frame))
 			break;
 
 		if ((unsigned long)fp < regs->sp)
@@ -1703,7 +1739,6 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	return entry;
 }
 
-#ifdef CONFIG_EVENT_TRACING
 void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
 {
 	regs->ip = ip;
@@ -1715,4 +1750,3 @@ void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int ski
 	regs->cs = __KERNEL_CS;
 	local_save_flags(regs->flags);
 }
-#endif

arch/x86/kernel/cpu/perf_event_amd.c

@@ -137,6 +137,13 @@ static inline int amd_is_nb_event(struct hw_perf_event *hwc)
 	return (hwc->config & 0xe0) == 0xe0;
 }
 
+static inline int amd_has_nb(struct cpu_hw_events *cpuc)
+{
+	struct amd_nb *nb = cpuc->amd_nb;
+
+	return nb && nb->nb_id != -1;
+}
+
 static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
 				      struct perf_event *event)
 {
@@ -147,7 +154,7 @@ static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
 	/*
 	 * only care about NB events
 	 */
-	if (!(nb && amd_is_nb_event(hwc)))
+	if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
 		return;
 
 	/*
@@ -214,7 +221,7 @@ amd_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event)
 	/*
 	 * if not NB event or no NB, then no constraints
 	 */
-	if (!(nb && amd_is_nb_event(hwc)))
+	if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
 		return &unconstrained;
 
 	/*
@@ -293,51 +300,55 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
 	return nb;
 }
 
-static void amd_pmu_cpu_online(int cpu)
+static int amd_pmu_cpu_prepare(int cpu)
+{
+	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
+
+	WARN_ON_ONCE(cpuc->amd_nb);
+
+	if (boot_cpu_data.x86_max_cores < 2)
+		return NOTIFY_OK;
+
+	cpuc->amd_nb = amd_alloc_nb(cpu, -1);
+	if (!cpuc->amd_nb)
+		return NOTIFY_BAD;
+
+	return NOTIFY_OK;
+}
+
+static void amd_pmu_cpu_starting(int cpu)
 {
-	struct cpu_hw_events *cpu1, *cpu2;
-	struct amd_nb *nb = NULL;
+	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
+	struct amd_nb *nb;
 	int i, nb_id;
 
 	if (boot_cpu_data.x86_max_cores < 2)
 		return;
 
-	/*
-	 * function may be called too early in the
-	 * boot process, in which case nb_id is bogus
-	 */
 	nb_id = amd_get_nb_id(cpu);
-	if (nb_id == BAD_APICID)
-		return;
-
-	cpu1 = &per_cpu(cpu_hw_events, cpu);
-	cpu1->amd_nb = NULL;
+	WARN_ON_ONCE(nb_id == BAD_APICID);
 
 	raw_spin_lock(&amd_nb_lock);
 
 	for_each_online_cpu(i) {
-		cpu2 = &per_cpu(cpu_hw_events, i);
-		nb = cpu2->amd_nb;
-		if (!nb)
+		nb = per_cpu(cpu_hw_events, i).amd_nb;
+		if (WARN_ON_ONCE(!nb))
 			continue;
-		if (nb->nb_id == nb_id)
-			goto found;
-	}
 
-	nb = amd_alloc_nb(cpu, nb_id);
-	if (!nb) {
-		pr_err("perf_events: failed NB allocation for CPU%d\n", cpu);
-		raw_spin_unlock(&amd_nb_lock);
-		return;
+		if (nb->nb_id == nb_id) {
+			kfree(cpuc->amd_nb);
+			cpuc->amd_nb = nb;
+			break;
+		}
 	}
-found:
-	nb->refcnt++;
-	cpu1->amd_nb = nb;
+
+	cpuc->amd_nb->nb_id = nb_id;
+	cpuc->amd_nb->refcnt++;
 
 	raw_spin_unlock(&amd_nb_lock);
 }
 
-static void amd_pmu_cpu_offline(int cpu)
+static void amd_pmu_cpu_dead(int cpu)
 {
 	struct cpu_hw_events *cpuhw;
 
@@ -349,8 +360,10 @@ static void amd_pmu_cpu_offline(int cpu)
 	raw_spin_lock(&amd_nb_lock);
 
 	if (cpuhw->amd_nb) {
-		if (--cpuhw->amd_nb->refcnt == 0)
-			kfree(cpuhw->amd_nb);
+		struct amd_nb *nb = cpuhw->amd_nb;
+
+		if (nb->nb_id == -1 || --nb->refcnt == 0)
+			kfree(nb);
 
 		cpuhw->amd_nb = NULL;
 	}
@@ -379,8 +392,9 @@ static __initconst struct x86_pmu amd_pmu = {
 	.get_event_constraints	= amd_get_event_constraints,
 	.put_event_constraints	= amd_put_event_constraints,
 
-	.cpu_prepare		= amd_pmu_cpu_online,
-	.cpu_dead		= amd_pmu_cpu_offline,
+	.cpu_prepare		= amd_pmu_cpu_prepare,
+	.cpu_starting		= amd_pmu_cpu_starting,
+	.cpu_dead		= amd_pmu_cpu_dead,
 };
 
 static __init int amd_pmu_init(void)

arch/x86/kernel/dumpstack.h

@@ -30,6 +30,11 @@ struct stack_frame {
 	unsigned long return_address;
 };
 
+struct stack_frame_ia32 {
+    u32 next_frame;
+    u32 return_address;
+};
+
 static inline unsigned long rewind_frame_pointer(int n)
 {
 	struct stack_frame *frame;

arch/x86/kernel/head32.c

@@ -7,6 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/start_kernel.h>
+#include <linux/mm.h>
 
 #include <asm/setup.h>
 #include <asm/sections.h>
@@ -44,9 +45,10 @@ void __init i386_start_kernel(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
 	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		/* Assume only end is not page aligned */
 		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
-		u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+		u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
 #endif

arch/x86/kernel/head64.c

@@ -103,9 +103,10 @@ void __init x86_64_start_reservations(char *real_mode_data)
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
 	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		/* Assume only end is not page aligned */
 		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
 		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-		unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
+		unsigned long ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
 #endif

arch/x86/kernel/kgdb.c

@@ -618,8 +618,8 @@ int kgdb_arch_init(void)
 	 * portion of kgdb because this operation requires mutexs to
 	 * complete.
 	 */
+	hw_breakpoint_init(&attr);
 	attr.bp_addr = (unsigned long)kgdb_arch_init;
-	attr.type = PERF_TYPE_BREAKPOINT;
 	attr.bp_len = HW_BREAKPOINT_LEN_1;
 	attr.bp_type = HW_BREAKPOINT_W;
 	attr.disabled = 1;

arch/x86/kernel/setup.c

@@ -313,16 +313,17 @@ static void __init reserve_brk(void)
 #define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
 static void __init relocate_initrd(void)
 {
-
+	/* Assume only end is not page aligned */
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+	u64 area_size     = PAGE_ALIGN(ramdisk_size);
 	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 	u64 ramdisk_here;
 	unsigned long slop, clen, mapaddr;
 	char *p, *q;
 
 	/* We need to move the initrd down into lowmem */
-	ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
+	ramdisk_here = find_e820_area(0, end_of_lowmem, area_size,
 					 PAGE_SIZE);
 
 	if (ramdisk_here == -1ULL)
@@ -331,7 +332,7 @@ static void __init relocate_initrd(void)
 
 	/* Note: this includes all the lowmem currently occupied by
 	   the initrd, we rely on that fact to keep the data intact. */
-	reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+	reserve_early(ramdisk_here, ramdisk_here + area_size,
 			 "NEW RAMDISK");
 	initrd_start = ramdisk_here + PAGE_OFFSET;
 	initrd_end   = initrd_start + ramdisk_size;
@@ -375,9 +376,10 @@ static void __init relocate_initrd(void)
 
 static void __init reserve_initrd(void)
 {
+	/* Assume only end is not page aligned */
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
-	u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+	u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
 	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 
 	if (!boot_params.hdr.type_of_loader ||

arch/x86/kernel/smpboot.c

@@ -243,8 +243,6 @@ static void __cpuinit smp_callin(void)
 	end_local_APIC_setup();
 	map_cpu_to_logical_apicid();
 
-	notify_cpu_starting(cpuid);
-
 	/*
 	 * Need to setup vector mappings before we enable interrupts.
 	 */
@@ -265,6 +263,8 @@ static void __cpuinit smp_callin(void)
 	 */
 	smp_store_cpu_info(cpuid);
 
+	notify_cpu_starting(cpuid);
+
 	/*
 	 * Allow the master to continue.
 	 */

arch/x86/kernel/vmlinux.lds.S

@@ -291,8 +291,8 @@ SECTIONS
 	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
 		__smp_locks = .;
 		*(.smp_locks)
-		__smp_locks_end = .;
 		. = ALIGN(PAGE_SIZE);
+		__smp_locks_end = .;
 	}
 
 #ifdef CONFIG_X86_64

arch/x86/mm/init.c

@@ -332,11 +332,23 @@ int devmem_is_allowed(unsigned long pagenr)
 
 void free_init_pages(char *what, unsigned long begin, unsigned long end)
 {
-	unsigned long addr = begin;
+	unsigned long addr;
+	unsigned long begin_aligned, end_aligned;
 
-	if (addr >= end)
+	/* Make sure boundaries are page aligned */
+	begin_aligned = PAGE_ALIGN(begin);
+	end_aligned   = end & PAGE_MASK;
+
+	if (WARN_ON(begin_aligned != begin || end_aligned != end)) {
+		begin = begin_aligned;
+		end   = end_aligned;
+	}
+
+	if (begin >= end)
 		return;
 
+	addr = begin;
+
 	/*
 	 * If debugging page accesses then do not free this memory but
 	 * mark them not present - any buggy init-section access will
@@ -344,7 +356,7 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	 */
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
-		begin, PAGE_ALIGN(end));
+		begin, end);
 	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
 #else
 	/*
@@ -359,8 +371,7 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	for (; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
-		memset((void *)(addr & ~(PAGE_SIZE-1)),
-			POISON_FREE_INITMEM, PAGE_SIZE);
+		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
 		free_page(addr);
 		totalram_pages++;
 	}
@@ -377,6 +388,15 @@ void free_initmem(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
-	free_init_pages("initrd memory", start, end);
+	/*
+	 * end could be not aligned, and We can not align that,
+	 * decompresser could be confused by aligned initrd_end
+	 * We already reserve the end partial page before in
+	 *   - i386_start_kernel()
+	 *   - x86_64_start_kernel()
+	 *   - relocate_initrd()
+	 * So here We can do PAGE_ALIGN() safely to get partial page to be freed
+	 */
+	free_init_pages("initrd memory", start, PAGE_ALIGN(end));
 }
 #endif

drivers/char/tty_io.c

@@ -1423,6 +1423,8 @@ static void release_one_tty(struct work_struct *work)
 	list_del_init(&tty->tty_files);
 	file_list_unlock();
 
+	put_pid(tty->pgrp);
+	put_pid(tty->session);
 	free_tty_struct(tty);
 }
 

drivers/gpu/drm/drm_crtc_helper.c

@@ -104,6 +104,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 	if (connector->status == connector_status_disconnected) {
 		DRM_DEBUG_KMS("%s is disconnected\n",
 			  drm_get_connector_name(connector));
+		drm_mode_connector_update_edid_property(connector, NULL);
 		goto prune;
 	}
 

drivers/gpu/drm/drm_edid.c

@@ -708,15 +708,6 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->vsync_end = mode->vsync_start + vsync_pulse_width;
 	mode->vtotal = mode->vdisplay + vblank;
 
-	/* perform the basic check for the detailed timing */
-	if (mode->hsync_end > mode->htotal ||
-		mode->vsync_end > mode->vtotal) {
-		drm_mode_destroy(dev, mode);
-		DRM_DEBUG_KMS("Incorrect detailed timing. "
-				"Sync is beyond the blank.\n");
-		return NULL;
-	}
-
 	/* Some EDIDs have bogus h/vtotal values */
 	if (mode->hsync_end > mode->htotal)
 		mode->htotal = mode->hsync_end + 1;

drivers/gpu/drm/drm_fb_helper.c

@@ -284,6 +284,8 @@ static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
 	.help_msg = "force-fb(V)",
 	.action_msg = "Restore framebuffer console",
 };
+#else
+static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
 #endif
 
 static void drm_fb_helper_on(struct fb_info *info)

drivers/gpu/drm/drm_fops.c

@@ -141,14 +141,16 @@ int drm_open(struct inode *inode, struct file *filp)
 		spin_unlock(&dev->count_lock);
 	}
 out:
-	mutex_lock(&dev->struct_mutex);
-	if (minor->type == DRM_MINOR_LEGACY) {
-		BUG_ON((dev->dev_mapping != NULL) &&
-			(dev->dev_mapping != inode->i_mapping));
-		if (dev->dev_mapping == NULL)
-			dev->dev_mapping = inode->i_mapping;
+	if (!retcode) {
+		mutex_lock(&dev->struct_mutex);
+		if (minor->type == DRM_MINOR_LEGACY) {
+			if (dev->dev_mapping == NULL)
+				dev->dev_mapping = inode->i_mapping;
+			else if (dev->dev_mapping != inode->i_mapping)
+				retcode = -ENODEV;
+		}
+		mutex_unlock(&dev->struct_mutex);
 	}
-	mutex_unlock(&dev->struct_mutex);
 
 	return retcode;
 }

drivers/gpu/drm/nouveau/Makefile

@@ -12,7 +12,7 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
              nouveau_dp.o nouveau_grctx.o \
              nv04_timer.o \
              nv04_mc.o nv40_mc.o nv50_mc.o \
-             nv04_fb.o nv10_fb.o nv40_fb.o \
+             nv04_fb.o nv10_fb.o nv40_fb.o nv50_fb.o \
              nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
              nv04_graph.o nv10_graph.o nv20_graph.o \
              nv40_graph.o nv50_graph.o \

drivers/gpu/drm/nouveau/nouveau_bios.c

@@ -5210,6 +5210,21 @@ divine_connector_type(struct nvbios *bios, int index)
 	return type;
 }
 
+static void
+apply_dcb_connector_quirks(struct nvbios *bios, int idx)
+{
+	struct dcb_connector_table_entry *cte = &bios->dcb.connector.entry[idx];
+	struct drm_device *dev = bios->dev;
+
+	/* Gigabyte NX85T */
+	if ((dev->pdev->device == 0x0421) &&
+	    (dev->pdev->subsystem_vendor == 0x1458) &&
+	    (dev->pdev->subsystem_device == 0x344c)) {
+		if (cte->type == DCB_CONNECTOR_HDMI_1)
+			cte->type = DCB_CONNECTOR_DVI_I;
+	}
+}
+
 static void
 parse_dcb_connector_table(struct nvbios *bios)
 {
@@ -5238,13 +5253,14 @@ parse_dcb_connector_table(struct nvbios *bios)
 	entry = conntab + conntab[1];
 	cte = &ct->entry[0];
 	for (i = 0; i < conntab[2]; i++, entry += conntab[3], cte++) {
+		cte->index = i;
 		if (conntab[3] == 2)
 			cte->entry = ROM16(entry[0]);
 		else
 			cte->entry = ROM32(entry[0]);
 
 		cte->type  = (cte->entry & 0x000000ff) >> 0;
-		cte->index = (cte->entry & 0x00000f00) >> 8;
+		cte->index2 = (cte->entry & 0x00000f00) >> 8;
 		switch (cte->entry & 0x00033000) {
 		case 0x00001000:
 			cte->gpio_tag = 0x07;
@@ -5266,6 +5282,8 @@ parse_dcb_connector_table(struct nvbios *bios)
 		if (cte->type == 0xff)
 			continue;
 
+		apply_dcb_connector_quirks(bios, i);
+
 		NV_INFO(dev, "  %d: 0x%08x: type 0x%02x idx %d tag 0x%02x\n",
 			i, cte->entry, cte->type, cte->index, cte->gpio_tag);
 
@@ -5287,10 +5305,16 @@ parse_dcb_connector_table(struct nvbios *bios)
 			break;
 		default:
 			cte->type = divine_connector_type(bios, cte->index);
-			NV_WARN(dev, "unknown type, using 0x%02x", cte->type);
+			NV_WARN(dev, "unknown type, using 0x%02x\n", cte->type);
 			break;
 		}
 
+		if (nouveau_override_conntype) {
+			int type = divine_connector_type(bios, cte->index);
+			if (type != cte->type)
+				NV_WARN(dev, " -> type 0x%02x\n", cte->type);
+		}
+
 	}
 }
 

drivers/gpu/drm/nouveau/nouveau_bios.h

@@ -72,9 +72,10 @@ enum dcb_connector_type {
 };
 
 struct dcb_connector_table_entry {
+	uint8_t index;
 	uint32_t entry;
 	enum dcb_connector_type type;
-	uint8_t index;
+	uint8_t index2;
 	uint8_t gpio_tag;
 };
 

drivers/gpu/drm/nouveau/nouveau_bo.c

@@ -440,8 +440,7 @@ nouveau_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl)
 
 	switch (bo->mem.mem_type) {
 	case TTM_PL_VRAM:
-		nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT |
-					 TTM_PL_FLAG_SYSTEM);
+		nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT);
 		break;
 	default:
 		nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_SYSTEM);

drivers/gpu/drm/nouveau/nouveau_connector.c

@@ -302,7 +302,7 @@ nouveau_connector_detect(struct drm_connector *connector)
 
 detect_analog:
 	nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
-	if (!nv_encoder)
+	if (!nv_encoder && !nouveau_tv_disable)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
 	if (nv_encoder) {
 		struct drm_encoder *encoder = to_drm_encoder(nv_encoder);

drivers/gpu/drm/nouveau/nouveau_dma.c

@@ -190,6 +190,11 @@ nv50_dma_push(struct nouveau_channel *chan, struct nouveau_bo *bo,
 	nouveau_bo_wr32(pb, ip++, upper_32_bits(offset) | length << 8);
 
 	chan->dma.ib_put = (chan->dma.ib_put + 1) & chan->dma.ib_max;
+
+	DRM_MEMORYBARRIER();
+	/* Flush writes. */
+	nouveau_bo_rd32(pb, 0);
+
 	nvchan_wr32(chan, 0x8c, chan->dma.ib_put);
 	chan->dma.ib_free--;
 }

drivers/gpu/drm/nouveau/nouveau_drv.c

@@ -83,6 +83,14 @@ MODULE_PARM_DESC(nofbaccel, "Disable fbcon acceleration");
 int nouveau_nofbaccel = 0;
 module_param_named(nofbaccel, nouveau_nofbaccel, int, 0400);
 
+MODULE_PARM_DESC(override_conntype, "Ignore DCB connector type");
+int nouveau_override_conntype = 0;
+module_param_named(override_conntype, nouveau_override_conntype, int, 0400);
+
+MODULE_PARM_DESC(tv_disable, "Disable TV-out detection\n");
+int nouveau_tv_disable = 0;
+module_param_named(tv_disable, nouveau_tv_disable, int, 0400);
+
 MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
 		 "\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n"
 		 "\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n"
@@ -154,9 +162,11 @@ nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state)
 	if (pm_state.event == PM_EVENT_PRETHAW)
 		return 0;
 
+	NV_INFO(dev, "Disabling fbcon acceleration...\n");
 	fbdev_flags = dev_priv->fbdev_info->flags;
 	dev_priv->fbdev_info->flags |= FBINFO_HWACCEL_DISABLED;
 
+	NV_INFO(dev, "Unpinning framebuffer(s)...\n");
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct nouveau_framebuffer *nouveau_fb;
 

drivers/gpu/drm/nouveau/nouveau_drv.h

@@ -681,6 +681,7 @@ extern int nouveau_uscript_tmds;
 extern int nouveau_vram_pushbuf;
 extern int nouveau_vram_notify;
 extern int nouveau_fbpercrtc;
+extern int nouveau_tv_disable;
 extern char *nouveau_tv_norm;
 extern int nouveau_reg_debug;
 extern char *nouveau_vbios;
@@ -688,6 +689,7 @@ extern int nouveau_ctxfw;
 extern int nouveau_ignorelid;
 extern int nouveau_nofbaccel;
 extern int nouveau_noaccel;
+extern int nouveau_override_conntype;
 
 extern int nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state);
 extern int nouveau_pci_resume(struct pci_dev *pdev);
@@ -926,6 +928,10 @@ extern void nv40_fb_takedown(struct drm_device *);
 extern void nv40_fb_set_region_tiling(struct drm_device *, int, uint32_t,
 				      uint32_t, uint32_t);
 
+/* nv50_fb.c */
+extern int  nv50_fb_init(struct drm_device *);
+extern void nv50_fb_takedown(struct drm_device *);
+
 /* nv04_fifo.c */
 extern int  nv04_fifo_init(struct drm_device *);
 extern void nv04_fifo_disable(struct drm_device *);

drivers/gpu/drm/nouveau/nouveau_state.c

@@ -36,7 +36,6 @@
 #include "nouveau_drm.h"
 #include "nv50_display.h"
 
-static int nouveau_stub_init(struct drm_device *dev) { return 0; }
 static void nouveau_stub_takedown(struct drm_device *dev) {}
 
 static int nouveau_init_engine_ptrs(struct drm_device *dev)
@@ -278,8 +277,8 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->timer.init		= nv04_timer_init;
 		engine->timer.read		= nv04_timer_read;
 		engine->timer.takedown		= nv04_timer_takedown;
-		engine->fb.init			= nouveau_stub_init;
-		engine->fb.takedown		= nouveau_stub_takedown;
+		engine->fb.init			= nv50_fb_init;
+		engine->fb.takedown		= nv50_fb_takedown;
 		engine->graph.grclass		= nv50_graph_grclass;
 		engine->graph.init		= nv50_graph_init;
 		engine->graph.takedown		= nv50_graph_takedown;

drivers/gpu/drm/nouveau/nv04_crtc.c

@@ -230,9 +230,9 @@ nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode)
 	struct drm_framebuffer *fb = crtc->fb;
 
 	/* Calculate our timings */
-	int horizDisplay	= (mode->crtc_hdisplay >> 3) 	- 1;
-	int horizStart		= (mode->crtc_hsync_start >> 3) 	- 1;
-	int horizEnd		= (mode->crtc_hsync_end >> 3) 	- 1;
+	int horizDisplay	= (mode->crtc_hdisplay >> 3)		- 1;
+	int horizStart		= (mode->crtc_hsync_start >> 3) 	+ 1;
+	int horizEnd		= (mode->crtc_hsync_end >> 3)		+ 1;
 	int horizTotal		= (mode->crtc_htotal >> 3)		- 5;
 	int horizBlankStart	= (mode->crtc_hdisplay >> 3)		- 1;
 	int horizBlankEnd	= (mode->crtc_htotal >> 3)		- 1;

drivers/gpu/drm/nouveau/nv04_fbcon.c

@@ -118,8 +118,8 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
 		return;
 	}
 
-	width = ALIGN(image->width, 32);
-	dsize = (width * image->height) >> 5;
+	width = ALIGN(image->width, 8);
+	dsize = ALIGN(width * image->height, 32) >> 5;
 
 	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
 	    info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
@@ -136,8 +136,8 @@ nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
 			 ((image->dx + image->width) & 0xffff));
 	OUT_RING(chan, bg);
 	OUT_RING(chan, fg);
-	OUT_RING(chan, (image->height << 16) | image->width);
 	OUT_RING(chan, (image->height << 16) | width);
+	OUT_RING(chan, (image->height << 16) | image->width);
 	OUT_RING(chan, (image->dy << 16) | (image->dx & 0xffff));
 
 	while (dsize) {

drivers/gpu/drm/nouveau/nv50_display.c

@@ -522,8 +522,8 @@ int nv50_display_create(struct drm_device *dev)
 	}
 
 	for (i = 0 ; i < dcb->connector.entries; i++) {
-		if (i != 0 && dcb->connector.entry[i].index ==
-			      dcb->connector.entry[i - 1].index)
+		if (i != 0 && dcb->connector.entry[i].index2 ==
+			      dcb->connector.entry[i - 1].index2)
 			continue;
 		nouveau_connector_create(dev, &dcb->connector.entry[i]);
 	}

drivers/gpu/drm/nouveau/nv50_fb.c

+#include "drmP.h"
+#include "drm.h"
+#include "nouveau_drv.h"
+#include "nouveau_drm.h"
+
+int
+nv50_fb_init(struct drm_device *dev)
+{
+	/* This is needed to get meaningful information from 100c90
+	 * on traps. No idea what these values mean exactly. */
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	switch (dev_priv->chipset) {
+	case 0x50:
+		nv_wr32(dev, 0x100c90, 0x0707ff);
+		break;
+	case 0xa5:
+	case 0xa8:
+		nv_wr32(dev, 0x100c90, 0x0d0fff);
+		break;
+	default:
+		nv_wr32(dev, 0x100c90, 0x1d07ff);
+		break;
+	}
+
+	return 0;
+}
+
+void
+nv50_fb_takedown(struct drm_device *dev)
+{
+}

drivers/gpu/drm/nouveau/nv50_fbcon.c

@@ -233,7 +233,7 @@ nv50_fbcon_accel_init(struct fb_info *info)
 	BEGIN_RING(chan, NvSub2D, 0x0808, 3);
 	OUT_RING(chan, 0);
 	OUT_RING(chan, 0);
-	OUT_RING(chan, 0);
+	OUT_RING(chan, 1);
 	BEGIN_RING(chan, NvSub2D, 0x081c, 1);
 	OUT_RING(chan, 1);
 	BEGIN_RING(chan, NvSub2D, 0x0840, 4);

drivers/gpu/drm/nouveau/nv50_graph.c

@@ -56,6 +56,10 @@ nv50_graph_init_intr(struct drm_device *dev)
 static void
 nv50_graph_init_regs__nv(struct drm_device *dev)
 {
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	uint32_t units = nv_rd32(dev, 0x1540);
+	int i;
+
 	NV_DEBUG(dev, "\n");
 
 	nv_wr32(dev, 0x400804, 0xc0000000);
@@ -65,6 +69,20 @@ nv50_graph_init_regs__nv(struct drm_device *dev)
 	nv_wr32(dev, 0x405018, 0xc0000000);
 	nv_wr32(dev, 0x402000, 0xc0000000);
 
+	for (i = 0; i < 16; i++) {
+		if (units & 1 << i) {
+			if (dev_priv->chipset < 0xa0) {
+				nv_wr32(dev, 0x408900 + (i << 12), 0xc0000000);
+				nv_wr32(dev, 0x408e08 + (i << 12), 0xc0000000);
+				nv_wr32(dev, 0x408314 + (i << 12), 0xc0000000);
+			} else {
+				nv_wr32(dev, 0x408600 + (i << 11), 0xc0000000);
+				nv_wr32(dev, 0x408708 + (i << 11), 0xc0000000);
+				nv_wr32(dev, 0x40831c + (i << 11), 0xc0000000);
+			}
+		}
+	}
+
 	nv_wr32(dev, 0x400108, 0xffffffff);
 
 	nv_wr32(dev, 0x400824, 0x00004000);
@@ -229,10 +247,6 @@ nv50_graph_create_context(struct nouveau_channel *chan)
 		nouveau_grctx_vals_load(dev, ctx);
 	}
 	nv_wo32(dev, ctx, 0x00000/4, chan->ramin->instance >> 12);
-	if ((dev_priv->chipset & 0xf0) == 0xa0)
-		nv_wo32(dev, ctx, 0x00004/4, 0x00000000);
-	else
-		nv_wo32(dev, ctx, 0x0011c/4, 0x00000000);
 	dev_priv->engine.instmem.finish_access(dev);
 
 	return 0;

drivers/gpu/drm/nouveau/nv50_grctx.c

@@ -64,6 +64,9 @@
 #define CP_FLAG_ALWAYS                ((2 * 32) + 13)
 #define CP_FLAG_ALWAYS_FALSE          0
 #define CP_FLAG_ALWAYS_TRUE           1
+#define CP_FLAG_INTR                  ((2 * 32) + 15)
+#define CP_FLAG_INTR_NOT_PENDING      0
+#define CP_FLAG_INTR_PENDING          1
 
 #define CP_CTX                   0x00100000
 #define CP_CTX_COUNT             0x000f0000
@@ -214,6 +217,8 @@ nv50_grctx_init(struct nouveau_grctx *ctx)
 	cp_name(ctx, cp_setup_save);
 	cp_set (ctx, UNK1D, SET);
 	cp_wait(ctx, STATUS, BUSY);
+	cp_wait(ctx, INTR, PENDING);
+	cp_bra (ctx, STATUS, BUSY, cp_setup_save);
 	cp_set (ctx, UNK01, SET);
 	cp_set (ctx, SWAP_DIRECTION, SAVE);
 
@@ -269,7 +274,7 @@ nv50_graph_construct_mmio(struct nouveau_grctx *ctx)
 	int offset, base;
 	uint32_t units = nv_rd32 (ctx->dev, 0x1540);
 
-	/* 0800 */
+	/* 0800: DISPATCH */
 	cp_ctx(ctx, 0x400808, 7);
 	gr_def(ctx, 0x400814, 0x00000030);
 	cp_ctx(ctx, 0x400834, 0x32);
@@ -300,7 +305,7 @@ nv50_graph_construct_mmio(struct nouveau_grctx *ctx)
 		gr_def(ctx, 0x400b20, 0x0001629d);
 	}
 
-	/* 0C00 */
+	/* 0C00: VFETCH */
 	cp_ctx(ctx, 0x400c08, 0x2);
 	gr_def(ctx, 0x400c08, 0x0000fe0c);
 
@@ -326,7 +331,7 @@ nv50_graph_construct_mmio(struct nouveau_grctx *ctx)
 	cp_ctx(ctx, 0x401540, 0x5);
 	gr_def(ctx, 0x401550, 0x00001018);
 
-	/* 1800 */
+	/* 1800: STREAMOUT */
 	cp_ctx(ctx, 0x401814, 0x1);
 	gr_def(ctx, 0x401814, 0x000000ff);
 	if (dev_priv->chipset == 0x50) {
@@ -641,7 +646,7 @@ nv50_graph_construct_mmio(struct nouveau_grctx *ctx)
 	if (dev_priv->chipset == 0x50)
 		cp_ctx(ctx, 0x4063e0, 0x1);
 
-	/* 6800 */
+	/* 6800: M2MF */
 	if (dev_priv->chipset < 0x90) {
 		cp_ctx(ctx, 0x406814, 0x2b);
 		gr_def(ctx, 0x406818, 0x00000f80);

drivers/gpu/drm/radeon/Makefile

@@ -50,7 +50,7 @@ $(obj)/r600_cs.o: $(obj)/r600_reg_safe.h
 radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
 	radeon_irq.o r300_cmdbuf.o r600_cp.o
 # add KMS driver
-radeon-y += radeon_device.o radeon_kms.o \
+radeon-y += radeon_device.o radeon_asic.o radeon_kms.o \
 	radeon_atombios.o radeon_agp.o atombios_crtc.o radeon_combios.o \
 	atom.o radeon_fence.o radeon_ttm.o radeon_object.o radeon_gart.o \
 	radeon_legacy_crtc.o radeon_legacy_encoders.o radeon_connectors.o \

drivers/gpu/drm/radeon/atom.c

@@ -53,15 +53,17 @@
 
 typedef struct {
 	struct atom_context *ctx;
-
 	uint32_t *ps, *ws;
 	int ps_shift;
 	uint16_t start;
+	unsigned last_jump;
+	unsigned long last_jump_jiffies;
+	bool abort;
 } atom_exec_context;
 
 int atom_debug = 0;
-static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params);
-void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params);
+static int atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params);
+int atom_execute_table(struct atom_context *ctx, int index, uint32_t * params);
 
 static uint32_t atom_arg_mask[8] =
     { 0xFFFFFFFF, 0xFFFF, 0xFFFF00, 0xFFFF0000, 0xFF, 0xFF00, 0xFF0000,
@@ -605,12 +607,17 @@ static void atom_op_beep(atom_exec_context *ctx, int *ptr, int arg)
 static void atom_op_calltable(atom_exec_context *ctx, int *ptr, int arg)
 {
 	int idx = U8((*ptr)++);
+	int r = 0;
+
 	if (idx < ATOM_TABLE_NAMES_CNT)
 		SDEBUG("   table: %d (%s)\n", idx, atom_table_names[idx]);
 	else
 		SDEBUG("   table: %d\n", idx);
 	if (U16(ctx->ctx->cmd_table + 4 + 2 * idx))
-		atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift);
+		r = atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift);
+	if (r) {
+		ctx->abort = true;
+	}
 }
 
 static void atom_op_clear(atom_exec_context *ctx, int *ptr, int arg)
@@ -674,6 +681,8 @@ static void atom_op_eot(atom_exec_context *ctx, int *ptr, int arg)
 static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
 {
 	int execute = 0, target = U16(*ptr);
+	unsigned long cjiffies;
+
 	(*ptr) += 2;
 	switch (arg) {
 	case ATOM_COND_ABOVE:
@@ -701,8 +710,25 @@ static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
 	if (arg != ATOM_COND_ALWAYS)
 		SDEBUG("   taken: %s\n", execute ? "yes" : "no");
 	SDEBUG("   target: 0x%04X\n", target);
-	if (execute)
+	if (execute) {
+		if (ctx->last_jump == (ctx->start + target)) {
+			cjiffies = jiffies;
+			if (time_after(cjiffies, ctx->last_jump_jiffies)) {
+				cjiffies -= ctx->last_jump_jiffies;
+				if ((jiffies_to_msecs(cjiffies) > 1000)) {
+					DRM_ERROR("atombios stuck in loop for more than 1sec aborting\n");
+					ctx->abort = true;
+				}
+			} else {
+				/* jiffies wrap around we will just wait a little longer */
+				ctx->last_jump_jiffies = jiffies;
+			}
+		} else {
+			ctx->last_jump = ctx->start + target;
+			ctx->last_jump_jiffies = jiffies;
+		}
 		*ptr = ctx->start + target;
+	}
 }
 
 static void atom_op_mask(atom_exec_context *ctx, int *ptr, int arg)
@@ -1105,7 +1131,7 @@ static struct {
 	atom_op_shr, ATOM_ARG_MC}, {
 atom_op_debug, 0},};
 
-static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params)
+static int atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params)
 {
 	int base = CU16(ctx->cmd_table + 4 + 2 * index);
 	int len, ws, ps, ptr;
@@ -1113,7 +1139,7 @@ static void atom_execute_table_locked(struct atom_context *ctx, int index, uint3
 	atom_exec_context ectx;
 
 	if (!base)
-		return;
+		return -EINVAL;
 
 	len = CU16(base + ATOM_CT_SIZE_PTR);
 	ws = CU8(base + ATOM_CT_WS_PTR);
@@ -1126,6 +1152,8 @@ static void atom_execute_table_locked(struct atom_context *ctx, int index, uint3
 	ectx.ps_shift = ps / 4;
 	ectx.start = base;
 	ectx.ps = params;
+	ectx.abort = false;
+	ectx.last_jump = 0;
 	if (ws)
 		ectx.ws = kzalloc(4 * ws, GFP_KERNEL);
 	else
@@ -1138,6 +1166,11 @@ static void atom_execute_table_locked(struct atom_context *ctx, int index, uint3
 			SDEBUG("%s @ 0x%04X\n", atom_op_names[op], ptr - 1);
 		else
 			SDEBUG("[%d] @ 0x%04X\n", op, ptr - 1);
+		if (ectx.abort) {
+			DRM_ERROR("atombios stuck executing %04X (len %d, WS %d, PS %d) @ 0x%04X\n",
+				base, len, ws, ps, ptr - 1);
+			return -EINVAL;
+		}
 
 		if (op < ATOM_OP_CNT && op > 0)
 			opcode_table[op].func(&ectx, &ptr,
@@ -1153,10 +1186,13 @@ static void atom_execute_table_locked(struct atom_context *ctx, int index, uint3
 
 	if (ws)
 		kfree(ectx.ws);
+	return 0;
 }
 
-void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
+int atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
 {
+	int r;
+
 	mutex_lock(&ctx->mutex);
 	/* reset reg block */
 	ctx->reg_block = 0;
@@ -1164,8 +1200,9 @@ void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
 	ctx->fb_base = 0;
 	/* reset io mode */
 	ctx->io_mode = ATOM_IO_MM;
-	atom_execute_table_locked(ctx, index, params);
+	r = atom_execute_table_locked(ctx, index, params);
 	mutex_unlock(&ctx->mutex);
+	return r;
 }
 
 static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 };
@@ -1249,9 +1286,7 @@ int atom_asic_init(struct atom_context *ctx)
 
 	if (!CU16(ctx->cmd_table + 4 + 2 * ATOM_CMD_INIT))
 		return 1;
-	atom_execute_table(ctx, ATOM_CMD_INIT, ps);
-
-	return 0;
+	return atom_execute_table(ctx, ATOM_CMD_INIT, ps);
 }
 
 void atom_destroy(struct atom_context *ctx)
@@ -1261,12 +1296,16 @@ void atom_destroy(struct atom_context *ctx)
 	kfree(ctx);
 }
 
-void atom_parse_data_header(struct atom_context *ctx, int index,
+bool atom_parse_data_header(struct atom_context *ctx, int index,
 			    uint16_t * size, uint8_t * frev, uint8_t * crev,
 			    uint16_t * data_start)
 {
 	int offset = index * 2 + 4;
 	int idx = CU16(ctx->data_table + offset);
+	u16 *mdt = (u16 *)(ctx->bios + ctx->data_table + 4);
+
+	if (!mdt[index])
+		return false;
 
 	if (size)
 		*size = CU16(idx);
@@ -1275,38 +1314,42 @@ void atom_parse_data_header(struct atom_context *ctx, int index,
 	if (crev)
 		*crev = CU8(idx + 3);
 	*data_start = idx;
-	return;
+	return true;
 }
 
-void atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t * frev,
+bool atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t * frev,
 			   uint8_t * crev)
 {
 	int offset = index * 2 + 4;
 	int idx = CU16(ctx->cmd_table + offset);
+	u16 *mct = (u16 *)(ctx->bios + ctx->cmd_table + 4);
+
+	if (!mct[index])
+		return false;
 
 	if (frev)
 		*frev = CU8(idx + 2);
 	if (crev)
 		*crev = CU8(idx + 3);
-	return;
+	return true;
 }
 
 int atom_allocate_fb_scratch(struct atom_context *ctx)
 {
 	int index = GetIndexIntoMasterTable(DATA, VRAM_UsageByFirmware);
 	uint16_t data_offset;
-	int usage_bytes;
+	int usage_bytes = 0;
 	struct _ATOM_VRAM_USAGE_BY_FIRMWARE *firmware_usage;
 
-	atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset);
+	if (atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset)) {
+		firmware_usage = (struct _ATOM_VRAM_USAGE_BY_FIRMWARE *)(ctx->bios + data_offset);
 
-	firmware_usage = (struct _ATOM_VRAM_USAGE_BY_FIRMWARE *)(ctx->bios + data_offset);
+		DRM_DEBUG("atom firmware requested %08x %dkb\n",
+			  firmware_usage->asFirmwareVramReserveInfo[0].ulStartAddrUsedByFirmware,
+			  firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb);
 
-	DRM_DEBUG("atom firmware requested %08x %dkb\n",
-		  firmware_usage->asFirmwareVramReserveInfo[0].ulStartAddrUsedByFirmware,
-		  firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb);
-
-	usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
+		usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
+	}
 	if (usage_bytes == 0)
 		usage_bytes = 20 * 1024;
 	/* allocate some scratch memory */

drivers/gpu/drm/radeon/atom.h

@@ -140,11 +140,13 @@ struct atom_context {
 extern int atom_debug;
 
 struct atom_context *atom_parse(struct card_info *, void *);
-void atom_execute_table(struct atom_context *, int, uint32_t *);
+int atom_execute_table(struct atom_context *, int, uint32_t *);
 int atom_asic_init(struct atom_context *);
 void atom_destroy(struct atom_context *);
-void atom_parse_data_header(struct atom_context *ctx, int index, uint16_t *size, uint8_t *frev, uint8_t *crev, uint16_t *data_start);
-void atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t *frev, uint8_t *crev);
+bool atom_parse_data_header(struct atom_context *ctx, int index, uint16_t *size,
+			    uint8_t *frev, uint8_t *crev, uint16_t *data_start);
+bool atom_parse_cmd_header(struct atom_context *ctx, int index,
+			   uint8_t *frev, uint8_t *crev);
 int atom_allocate_fb_scratch(struct atom_context *ctx);
 #include "atom-types.h"
 #include "atombios.h"

drivers/gpu/drm/radeon/atombios_crtc.c

@@ -353,12 +353,55 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc,
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+static void atombios_disable_ss(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	u32 ss_cntl;
+
+	if (ASIC_IS_DCE4(rdev)) {
+		switch (radeon_crtc->pll_id) {
+		case ATOM_PPLL1:
+			ss_cntl = RREG32(EVERGREEN_P1PLL_SS_CNTL);
+			ss_cntl &= ~EVERGREEN_PxPLL_SS_EN;
+			WREG32(EVERGREEN_P1PLL_SS_CNTL, ss_cntl);
+			break;
+		case ATOM_PPLL2:
+			ss_cntl = RREG32(EVERGREEN_P2PLL_SS_CNTL);
+			ss_cntl &= ~EVERGREEN_PxPLL_SS_EN;
+			WREG32(EVERGREEN_P2PLL_SS_CNTL, ss_cntl);
+			break;
+		case ATOM_DCPLL:
+		case ATOM_PPLL_INVALID:
+			return;
+		}
+	} else if (ASIC_IS_AVIVO(rdev)) {
+		switch (radeon_crtc->pll_id) {
+		case ATOM_PPLL1:
+			ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL);
+			ss_cntl &= ~1;
+			WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl);
+			break;
+		case ATOM_PPLL2:
+			ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL);
+			ss_cntl &= ~1;
+			WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl);
+			break;
+		case ATOM_DCPLL:
+		case ATOM_PPLL_INVALID:
+			return;
+		}
+	}
+}
+
+
 union atom_enable_ss {
 	ENABLE_LVDS_SS_PARAMETERS legacy;
 	ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION v1;
 };
 
-static void atombios_set_ss(struct drm_crtc *crtc, int enable)
+static void atombios_enable_ss(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
@@ -387,9 +430,9 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable)
 					step = dig->ss->step;
 					delay = dig->ss->delay;
 					range = dig->ss->range;
-				} else if (enable)
+				} else
 					return;
-			} else if (enable)
+			} else
 				return;
 			break;
 		}
@@ -406,13 +449,13 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable)
 		args.v1.ucSpreadSpectrumDelay = delay;
 		args.v1.ucSpreadSpectrumRange = range;
 		args.v1.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
-		args.v1.ucEnable = enable;
+		args.v1.ucEnable = ATOM_ENABLE;
 	} else {
 		args.legacy.usSpreadSpectrumPercentage = cpu_to_le16(percentage);
 		args.legacy.ucSpreadSpectrumType = type;
 		args.legacy.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2;
 		args.legacy.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4;
-		args.legacy.ucEnable = enable;
+		args.legacy.ucEnable = ATOM_ENABLE;
 	}
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
@@ -478,11 +521,6 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 				/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
 				if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
 					adjusted_clock = mode->clock * 2;
-				/* LVDS PLL quirks */
-				if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
-					struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-					pll->algo = dig->pll_algo;
-				}
 			} else {
 				if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
 					pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
@@ -503,8 +541,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 		int index;
 
 		index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll);
-		atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
-				      &crev);
+		if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+					   &crev))
+			return adjusted_clock;
 
 		memset(&args, 0, sizeof(args));
 
@@ -542,11 +581,16 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					}
 				} else if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
 					/* may want to enable SS on DP/eDP eventually */
-					args.v3.sInput.ucDispPllConfig |=
-						DISPPLL_CONFIG_SS_ENABLE;
-					if (mode->clock > 165000)
+					/*args.v3.sInput.ucDispPllConfig |=
+						DISPPLL_CONFIG_SS_ENABLE;*/
+					if (encoder_mode == ATOM_ENCODER_MODE_DP)
 						args.v3.sInput.ucDispPllConfig |=
-							DISPPLL_CONFIG_DUAL_LINK;
+							DISPPLL_CONFIG_COHERENT_MODE;
+					else {
+						if (mode->clock > 165000)
+							args.v3.sInput.ucDispPllConfig |=
+								DISPPLL_CONFIG_DUAL_LINK;
+					}
 				}
 				atom_execute_table(rdev->mode_info.atom_context,
 						   index, (uint32_t *)&args);
@@ -592,8 +636,9 @@ static void atombios_crtc_set_dcpll(struct drm_crtc *crtc)
 	memset(&args, 0, sizeof(args));
 
 	index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
-	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
-			      &crev);
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+				   &crev))
+		return;
 
 	switch (frev) {
 	case 1:
@@ -667,8 +712,9 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
 			   &ref_div, &post_div);
 
 	index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
-	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
-			      &crev);
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+				   &crev))
+		return;
 
 	switch (frev) {
 	case 1:
@@ -1083,15 +1129,12 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* TODO color tiling */
 
-	/* pick pll */
-	radeon_crtc->pll_id = radeon_atom_pick_pll(crtc);
-
-	atombios_set_ss(crtc, 0);
+	atombios_disable_ss(crtc);
 	/* always set DCPLL */
 	if (ASIC_IS_DCE4(rdev))
 		atombios_crtc_set_dcpll(crtc);
 	atombios_crtc_set_pll(crtc, adjusted_mode);
-	atombios_set_ss(crtc, 1);
+	atombios_enable_ss(crtc);
 
 	if (ASIC_IS_DCE4(rdev))
 		atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
@@ -1120,6 +1163,11 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc,
 
 static void atombios_crtc_prepare(struct drm_crtc *crtc)
 {
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+	/* pick pll */
+	radeon_crtc->pll_id = radeon_atom_pick_pll(crtc);
+
 	atombios_lock_crtc(crtc, ATOM_ENABLE);
 	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
 }

drivers/gpu/drm/radeon/atombios_dp.c

@@ -745,14 +745,14 @@ void dp_link_train(struct drm_encoder *encoder,
 			  >> DP_TRAIN_PRE_EMPHASIS_SHIFT);
 
 	/* disable the training pattern on the sink */
+	dp_set_training(radeon_connector, DP_TRAINING_PATTERN_DISABLE);
+
+	/* disable the training pattern on the source */
 	if (ASIC_IS_DCE4(rdev))
 		atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE);
 	else
 		radeon_dp_encoder_service(rdev, ATOM_DP_ACTION_TRAINING_COMPLETE,
 					  dig_connector->dp_clock, enc_id, 0);
-
-	radeon_dp_encoder_service(rdev, ATOM_DP_ACTION_TRAINING_COMPLETE,
-				  dig_connector->dp_clock, enc_id, 0);
 }
 
 int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,

drivers/gpu/drm/radeon/evergreen.c

@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include "drmP.h"
 #include "radeon.h"
+#include "radeon_asic.h"
 #include "radeon_drm.h"
 #include "rv770d.h"
 #include "atom.h"
@@ -437,7 +438,6 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 
 int evergreen_mc_init(struct radeon_device *rdev)
 {
-	fixed20_12 a;
 	u32 tmp;
 	int chansize, numchan;
 
@@ -482,12 +482,8 @@ int evergreen_mc_init(struct radeon_device *rdev)
 		rdev->mc.real_vram_size = rdev->mc.aper_size;
 	}
 	r600_vram_gtt_location(rdev, &rdev->mc);
-	/* FIXME: we should enforce default clock in case GPU is not in
-	 * default setup
-	 */
-	a.full = rfixed_const(100);
-	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
-	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+	radeon_update_bandwidth_info(rdev);
+
 	return 0;
 }
 
@@ -747,6 +743,7 @@ int evergreen_init(struct radeon_device *rdev)
 
 void evergreen_fini(struct radeon_device *rdev)
 {
+	radeon_pm_fini(rdev);
 	evergreen_suspend(rdev);
 #if 0
 	r600_blit_fini(rdev);

drivers/gpu/drm/radeon/r100.c

@@ -32,6 +32,7 @@
 #include "radeon_drm.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_asic.h"
 #include "r100d.h"
 #include "rs100d.h"
 #include "rv200d.h"
@@ -236,9 +237,9 @@ int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 
 void r100_pci_gart_fini(struct radeon_device *rdev)
 {
+	radeon_gart_fini(rdev);
 	r100_pci_gart_disable(rdev);
 	radeon_gart_table_ram_free(rdev);
-	radeon_gart_fini(rdev);
 }
 
 int r100_irq_set(struct radeon_device *rdev)
@@ -313,10 +314,12 @@ int r100_irq_process(struct radeon_device *rdev)
 		/* Vertical blank interrupts */
 		if (status & RADEON_CRTC_VBLANK_STAT) {
 			drm_handle_vblank(rdev->ddev, 0);
+			rdev->pm.vblank_sync = true;
 			wake_up(&rdev->irq.vblank_queue);
 		}
 		if (status & RADEON_CRTC2_VBLANK_STAT) {
 			drm_handle_vblank(rdev->ddev, 1);
+			rdev->pm.vblank_sync = true;
 			wake_up(&rdev->irq.vblank_queue);
 		}
 		if (status & RADEON_FP_DETECT_STAT) {
@@ -742,6 +745,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
 	udelay(10);
 	rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
 	rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR);
+	/* protect against crazy HW on resume */
+	rdev->cp.wptr &= rdev->cp.ptr_mask;
 	/* Set cp mode to bus mastering & enable cp*/
 	WREG32(RADEON_CP_CSQ_MODE,
 	       REG_SET(RADEON_INDIRECT2_START, indirect2_start) |
@@ -1805,6 +1810,7 @@ void r100_set_common_regs(struct radeon_device *rdev)
 {
 	struct drm_device *dev = rdev->ddev;
 	bool force_dac2 = false;
+	u32 tmp;
 
 	/* set these so they don't interfere with anything */
 	WREG32(RADEON_OV0_SCALE_CNTL, 0);
@@ -1876,6 +1882,12 @@ void r100_set_common_regs(struct radeon_device *rdev)
 		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
 		WREG32(RADEON_DAC_CNTL2, dac2_cntl);
 	}
+
+	/* switch PM block to ACPI mode */
+	tmp = RREG32_PLL(RADEON_PLL_PWRMGT_CNTL);
+	tmp &= ~RADEON_PM_MODE_SEL;
+	WREG32_PLL(RADEON_PLL_PWRMGT_CNTL, tmp);
+
 }
 
 /*
@@ -2023,6 +2035,7 @@ void r100_mc_init(struct radeon_device *rdev)
 	radeon_vram_location(rdev, &rdev->mc, base);
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
+	radeon_update_bandwidth_info(rdev);
 }
 
 
@@ -2386,6 +2399,8 @@ void r100_bandwidth_update(struct radeon_device *rdev)
 	uint32_t pixel_bytes1 = 0;
 	uint32_t pixel_bytes2 = 0;
 
+	radeon_update_display_priority(rdev);
+
 	if (rdev->mode_info.crtcs[0]->base.enabled) {
 		mode1 = &rdev->mode_info.crtcs[0]->base.mode;
 		pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
@@ -2414,11 +2429,8 @@ void r100_bandwidth_update(struct radeon_device *rdev)
 	/*
 	 * determine is there is enough bw for current mode
 	 */
-	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-	temp_ff.full = rfixed_const(100);
-	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+	sclk_ff = rdev->pm.sclk;
+	mclk_ff = rdev->pm.mclk;
 
 	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
 	temp_ff.full = rfixed_const(temp);
@@ -3441,6 +3453,7 @@ int r100_suspend(struct radeon_device *rdev)
 
 void r100_fini(struct radeon_device *rdev)
 {
+	radeon_pm_fini(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);

drivers/gpu/drm/radeon/r200.c

@@ -30,6 +30,7 @@
 #include "radeon_drm.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_asic.h"
 
 #include "r100d.h"
 #include "r200_reg_safe.h"

drivers/gpu/drm/radeon/r300.c

@@ -31,6 +31,7 @@
 #include "drm.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_asic.h"
 #include "radeon_drm.h"
 #include "r100_track.h"
 #include "r300d.h"
@@ -165,9 +166,9 @@ void rv370_pcie_gart_disable(struct radeon_device *rdev)
 
 void rv370_pcie_gart_fini(struct radeon_device *rdev)
 {
+	radeon_gart_fini(rdev);
 	rv370_pcie_gart_disable(rdev);
 	radeon_gart_table_vram_free(rdev);
-	radeon_gart_fini(rdev);
 }
 
 void r300_fence_ring_emit(struct radeon_device *rdev,
@@ -482,6 +483,7 @@ void r300_mc_init(struct radeon_device *rdev)
 	radeon_vram_location(rdev, &rdev->mc, base);
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
+	radeon_update_bandwidth_info(rdev);
 }
 
 void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes)
@@ -1335,6 +1337,7 @@ int r300_suspend(struct radeon_device *rdev)
 
 void r300_fini(struct radeon_device *rdev)
 {
+	radeon_pm_fini(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);

drivers/gpu/drm/radeon/r420.c

@@ -30,6 +30,7 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_asic.h"
 #include "atom.h"
 #include "r100d.h"
 #include "r420d.h"
@@ -267,6 +268,7 @@ int r420_suspend(struct radeon_device *rdev)
 
 void r420_fini(struct radeon_device *rdev)
 {
+	radeon_pm_fini(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);

drivers/gpu/drm/radeon/r520.c

@@ -27,6 +27,7 @@
  */
 #include "drmP.h"
 #include "radeon.h"
+#include "radeon_asic.h"
 #include "atom.h"
 #include "r520d.h"
 
@@ -121,19 +122,13 @@ static void r520_vram_get_type(struct radeon_device *rdev)
 
 void r520_mc_init(struct radeon_device *rdev)
 {
-	fixed20_12 a;
 
 	r520_vram_get_type(rdev);
 	r100_vram_init_sizes(rdev);
 	radeon_vram_location(rdev, &rdev->mc, 0);
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
-	/* FIXME: we should enforce default clock in case GPU is not in
-	 * default setup
-	 */
-	a.full = rfixed_const(100);
-	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
-	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+	radeon_update_bandwidth_info(rdev);
 }
 
 void r520_mc_program(struct radeon_device *rdev)