提交 2b1a40e8 编写于 作者: P Peter Chen 提交者: Shawn Guo

ARM: dts: imx6: change default burst size for USB

It can improve the USB performance when choosing larger
burst size at some systems (bus size is larger), there is
no side effect if this burst size is larger than bus size.
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
上级 9493bf54
...@@ -907,6 +907,8 @@ ...@@ -907,6 +907,8 @@
fsl,usbphy = <&usbphy1>; fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>; fsl,usbmisc = <&usbmisc 0>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -919,6 +921,8 @@ ...@@ -919,6 +921,8 @@
fsl,usbmisc = <&usbmisc 1>; fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host"; dr_mode = "host";
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -930,6 +934,8 @@ ...@@ -930,6 +934,8 @@
fsl,usbmisc = <&usbmisc 2>; fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host"; dr_mode = "host";
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -941,6 +947,8 @@ ...@@ -941,6 +947,8 @@
fsl,usbmisc = <&usbmisc 3>; fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host"; dr_mode = "host";
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
......
...@@ -709,6 +709,8 @@ ...@@ -709,6 +709,8 @@
fsl,usbphy = <&usbphy1>; fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>; fsl,usbmisc = <&usbmisc 0>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -720,6 +722,8 @@ ...@@ -720,6 +722,8 @@
fsl,usbphy = <&usbphy2>; fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>; fsl,usbmisc = <&usbmisc 1>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -731,6 +735,8 @@ ...@@ -731,6 +735,8 @@
fsl,usbmisc = <&usbmisc 2>; fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host"; dr_mode = "host";
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
......
...@@ -784,6 +784,8 @@ ...@@ -784,6 +784,8 @@
fsl,usbmisc = <&usbmisc 0>; fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>; fsl,anatop = <&anatop>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -795,6 +797,8 @@ ...@@ -795,6 +797,8 @@
fsl,usbphy = <&usbphy2>; fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>; fsl,usbmisc = <&usbmisc 1>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -808,6 +812,8 @@ ...@@ -808,6 +812,8 @@
fsl,anatop = <&anatop>; fsl,anatop = <&anatop>;
dr_mode = "host"; dr_mode = "host";
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
......
...@@ -549,6 +549,8 @@ ...@@ -549,6 +549,8 @@
fsl,usbmisc = <&usbmisc 0>; fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>; fsl,anatop = <&anatop>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
...@@ -560,6 +562,8 @@ ...@@ -560,6 +562,8 @@
fsl,usbphy = <&usbphy2>; fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>; fsl,usbmisc = <&usbmisc 1>;
ahb-burst-config = <0x0>; ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled"; status = "disabled";
}; };
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册