Merge branch 'baserock/bjdooks/312-rc4/be/core-v3' of...

Merge branch 'baserock/bjdooks/312-rc4/be/core-v3' of git://git.baserock.org/delta/linux into devel-stable

Conflicts:
	arch/arm/kernel/head.S

This series has been well tested and it would be great to get this
merged now.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Documentation/block/00-INDEX

@@ -6,6 +6,8 @@ capability.txt
 	- Generic Block Device Capability (/sys/block/<device>/capability)
 cfq-iosched.txt
 	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
 data-integrity.txt
 	- Block data integrity
 deadline-iosched.txt

Documentation/block/cmdline-partition.txt

-Embedded device command line partition
+Embedded device command line partition parsing
 =====================================================================
 
-Read block device partition table from command line.
-The partition used for fixed block device (eMMC) embedded device.
-It is no MBR, save storage space. Bootloader can be easily accessed
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
 by absolute address of data on the block device.
 Users can easily change the partition.
 

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
 described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
+Required properties:
+- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+		"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
+		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
+		"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
+		"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
+		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
+		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
-
-When used with Renesas SDHI hardware, the following compatibility strings
-configure various model-specific properties:
-
-"renesas,sh7372-sdhi":	(default) compatible with SH7372
-"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
-			wait for the interface to become idle.

Documentation/devicetree/bindings/net/fsl-tsec-phy.txt

@@ -86,6 +86,7 @@ General Properties:
 
 Clock Properties:
 
+  - fsl,cksel        Timer reference clock source.
   - fsl,tclk-period  Timer reference clock period in nanoseconds.
   - fsl,tmr-prsc     Prescaler, divides the output clock.
   - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
   clock. You must choose these carefully for the clock to work right.
   Here is how to figure good values:
 
-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
   tclk_period  = desired clock period       nanoseconds
   NominalFreq  = 1000 / tclk_period         MHz
   FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,6 +115,20 @@ Clock Properties:
   Pulse Per Second (PPS) signal, since this will be offered to the PPS
   subsystem to synchronize the Linux clock.
 
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:
 
 	ptp_clock@24E00 {
@@ -121,6 +136,7 @@ Example:
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
 		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
 		fsl,tclk-period = <10>;
 		fsl,tmr-prsc    = <100>;
 		fsl,tmr-add     = <0x999999A4>;

Documentation/kernel-parameters.txt

@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.

MAINTAINERS

@@ -824,15 +824,21 @@ S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M:	Barry Song <baohua.song@csr.com>
+M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
 F:	arch/arm/mach-prima2/
+F:	drivers/clk/clk-prima2.c
+F:	drivers/clocksource/timer-prima2.c
+F:	drivers/clocksource/timer-marco.c
 F:	drivers/dma/sirf-dma.c
 F:	drivers/i2c/busses/i2c-sirf.c
+F:	drivers/input/misc/sirfsoc-onkey.c
+F:	drivers/irqchip/irq-sirfsoc.c
 F:	drivers/mmc/host/sdhci-sirf.c
 F:	drivers/pinctrl/sirf/
+F:	drivers/rtc/rtc-sirfsoc.c
 F:	drivers/spi/spi-sirf.c
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -4470,6 +4476,13 @@ L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/ioc3_serial.c
 
+IOMMU DRIVERS
+M:	Joerg Roedel <joro@8bytes.org>
+L:	iommu@lists.linux-foundation.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+S:	Maintained
+F:	drivers/iommu/
+
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
@@ -7271,9 +7284,9 @@ F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
 
 SCORE ARCHITECTURE
-M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Chen Liqin <liqin.linux@gmail.com>
 M:	Lennox Wu <lennox.wu@gmail.com>
-W:	http://www.sunplusct.com
+W:	http://www.sunplus.com
 S:	Supported
 F:	arch/score/
 
@@ -9378,6 +9391,7 @@ F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
+M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 S:	Supported

Makefile

 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arc/include/asm/spinlock.h

@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }
 

arch/arc/include/asm/uaccess.h

@@ -43,7 +43,7 @@
  * Because it essentially checks if buffer end is within limit and @len is
  * non-ngeative, which implies that buffer start will be within limit too.
  *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
  * compile time constant, causing first sub-expression to be compile time
  * subsumed.
  *
@@ -53,7 +53,7 @@
  *
  */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))
 

arch/arc/kernel/signal.c

@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;
 
-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;
 
 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;
 
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
@@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 	if (!sf)
 		return 1;
 
+	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
 	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		magic = MAGIC_SIGALTSTK;
 	}
 
-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;

arch/arc/kernel/time.c

@@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
-	clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
-
-	clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
 	clk->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(clk);
+	clockevents_config_and_register(clk, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);
 
 	/*
 	 * setup the per-cpu timer IRQ handler - for all cpus

arch/arc/kernel/unaligned.c

@@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}
 
 	return 0;

arch/arm/Kconfig

@@ -483,6 +483,7 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_XSCALE

arch/arm/Makefile

@@ -16,6 +16,7 @@ LDFLAGS		:=
 LDFLAGS_vmlinux	:=-p --no-undefined -X
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
+LDFLAGS_MODULE	+= --be8
 endif
 
 OBJCOPYFLAGS	:=-O binary -R .comment -S

arch/arm/boot/compressed/head.S

@@ -135,6 +135,7 @@ start:
 		.word	_edata			@ zImage end address
  THUMB(		.thumb			)
 1:
+ ARM_BE8(	setend	be )			@ go BE8 if compiled for BE8
 		mrs	r9, cpsr
 #ifdef CONFIG_ARM_VIRT_EXT
 		bl	__hyp_stub_install	@ get into SVC mode, reversibly
@@ -699,9 +700,7 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
+ ARM_BE8(	orr	r0, r0, #1 << 25 )	@ big-endian page tables
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -728,9 +727,7 @@ __armv7_mmu_cache_on:
 		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
 						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
+ ARM_BE8(	orr	r0, r0, #1 << 25 )	@ big-endian page tables
 		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client

arch/arm/boot/dts/Makefile

@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -27,6 +27,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -57,6 +76,11 @@
 					marvell,pins = "mpp56";
 					marvell,function = "gpio";
 				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
 			};
 
 			mdio {
@@ -89,22 +113,6 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Connected to Marvell SATA controller */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected to FL1009 USB 3.0 controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 
@@ -160,7 +168,7 @@
 		button@1 {
 			label = "Power Button";
 			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 1>;
+			gpios = <&gpio1 30 0>;
 		};
 
 		button@2 {
@@ -176,4 +184,11 @@
 		};
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
 };

arch/arm/boot/dts/armada-xp.dtsi

@@ -70,6 +70,8 @@
 
 			timer@20300 {
 				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -169,4 +171,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -556,6 +556,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -567,6 +568,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/atlas6.dtsi

@@ -181,6 +181,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +201,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +210,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +221,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +247,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {

arch/arm/boot/dts/kirkwood.dtsi

@@ -13,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -167,7 +168,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 

arch/arm/boot/dts/prima2.dtsi

@@ -171,7 +171,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +197,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +230,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +241,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +252,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +278,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {

arch/arm/boot/dts/r8a73a4.dtsi

@@ -193,7 +193,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -202,7 +202,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -211,7 +211,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;

arch/arm/boot/dts/r8a7778.dtsi

@@ -96,6 +96,5 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7778";
 		reg = <0xfffc000 0x118>;
-		#gpio-range-cells = <3>;
 	};
 };

arch/arm/boot/dts/r8a7779.dtsi

@@ -188,7 +188,6 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
-		#gpio-range-cells = <3>;
 	};
 
 	thermal@ffc48000 {

arch/arm/boot/dts/r8a7790.dtsi

@@ -148,11 +148,10 @@
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7790";
 		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -161,7 +160,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -170,7 +169,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;
@@ -179,7 +178,7 @@
 	};
 
 	sdhi3: sdhi@ee160000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 4>;

arch/arm/boot/dts/sh73a0.dtsi

@@ -196,7 +196,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee100000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 83 4
@@ -208,7 +208,7 @@
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee120000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 88 4
@@ -219,7 +219,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee140000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 104 4

arch/arm/common/edma.c

@@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
+
 /*****************************************************************************/
 
 static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 static int prepare_unused_channel_list(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
+	int i, count, ctlr;
+	struct of_phandle_args  dma_spec;
 
+	if (dev->of_node) {
+		count = of_property_count_strings(dev->of_node, "dma-names");
+		if (count < 0)
+			return 0;
+		for (i = 0; i < count; i++) {
+			if (of_parse_phandle_with_args(dev->of_node, "dmas",
+						       "#dma-cells", i,
+						       &dma_spec))
+				continue;
+
+			if (!of_match_node(edma_of_ids, dma_spec.np)) {
+				of_node_put(dma_spec.np);
+				continue;
+			}
+
+			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+				  edma_cc[0]->edma_unused);
+			of_node_put(dma_spec.np);
+		}
+		return 0;
+	}
+
+	/* For non-OF case */
 	for (i = 0; i < pdev->num_resources; i++) {
 		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
 				(int)pdev->resource[i].start >= 0) {
 			ctlr = EDMA_CTLR(pdev->resource[i].start);
 			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
+				  edma_cc[ctlr]->edma_unused);
 		}
 	}
 
@@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
 static struct platform_driver edma_driver = {
 	.driver = {
 		.name	= "edma",

arch/arm/common/mcpm_head.S

@@ -15,6 +15,7 @@
 
 #include <linux/linkage.h>
 #include <asm/mcpm.h>
+#include <asm/assembler.h>
 
 #include "vlock.h"
 
@@ -47,6 +48,7 @@
 
 ENTRY(mcpm_entry_point)
 
+ ARM_BE8(setend        be)
  THUMB(	adr	r12, BSYM(1f)	)
  THUMB(	bx	r12		)
  THUMB(	.thumb			)

arch/arm/configs/multi_v7_defconfig

@@ -135,6 +135,7 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_OMAP=y

arch/arm/include/asm/assembler.h

@@ -53,6 +53,13 @@
 #define put_byte_3      lsl #0
 #endif
 
+/* Select code for any configuration running in BE8 mode */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ARM_BE8(code...) code
+#else
+#define ARM_BE8(code...)
+#endif
+
 /*
  * Data preload for architectures that support it
  */

arch/arm/include/asm/atomic.h

@@ -307,8 +307,8 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_add\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
+"	adds	%Q0, %Q0, %Q4\n"
+"	adc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -326,8 +326,8 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
+"	adds	%Q0, %Q0, %Q4\n"
+"	adc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -348,8 +348,8 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 	prefetchw(&v->counter);
 	__asm__ __volatile__("@ atomic64_sub\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
+"	subs	%Q0, %Q0, %Q4\n"
+"	sbc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -367,8 +367,8 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
+"	subs	%Q0, %Q0, %Q4\n"
+"	sbc	%R0, %R0, %R4\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
@@ -435,9 +435,9 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v)
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, #1\n"
-"	sbc	%H0, %H0, #0\n"
-"	teq	%H0, #0\n"
+"	subs	%Q0, %Q0, #1\n"
+"	sbc	%R0, %R0, #0\n"
+"	teq	%R0, #0\n"
 "	bmi	2f\n"
 "	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
@@ -466,8 +466,8 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
 "	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %6\n"
-"	adc	%H0, %H0, %H6\n"
+"	adds	%Q0, %Q0, %Q6\n"
+"	adc	%R0, %R0, %R6\n"
 "	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"

arch/arm/include/asm/bug.h

@@ -2,6 +2,8 @@
 #define _ASMARM_BUG_H
 
 #include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/opcodes.h>
 
 #ifdef CONFIG_BUG
 
@@ -12,10 +14,10 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 #define BUG_INSTR_VALUE 0xde02
-#define BUG_INSTR_TYPE ".hword "
+#define BUG_INSTR(__value) __inst_thumb16(__value)
 #else
 #define BUG_INSTR_VALUE 0xe7f001f2
-#define BUG_INSTR_TYPE ".word "
+#define BUG_INSTR(__value) __inst_arm(__value)
 #endif
 
 
@@ -33,7 +35,7 @@
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n"	\
+	asm volatile("1:\t" BUG_INSTR(__value) "\n"  \
 		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
 		"2:\t.asciz " #__file "\n" 			\
 		".popsection\n" 				\
@@ -48,7 +50,7 @@ do {								\
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	asm volatile(BUG_INSTR_TYPE #__value);			\
+	asm volatile(BUG_INSTR(__value) "\n");			\
 	unreachable();						\
 } while (0)
 #endif  /* CONFIG_DEBUG_BUGVERBOSE */

arch/arm/include/asm/hardware/coresight.h

@@ -24,8 +24,8 @@
 #define TRACER_TIMEOUT 10000
 
 #define etm_writel(t, v, x) \
-	(__raw_writel((v), (t)->etm_regs + (x)))
-#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+	(writel_relaxed((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (readl_relaxed((t)->etm_regs + (x)))
 
 /* CoreSight Management Registers */
 #define CSMR_LOCKACCESS 0xfb0
@@ -142,8 +142,8 @@
 #define ETBFF_TRIGFL		BIT(10)
 
 #define etb_writel(t, v, x) \
-	(__raw_writel((v), (t)->etb_regs + (x)))
-#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+	(writel_relaxed((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (readl_relaxed((t)->etb_regs + (x)))
 
 #define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
 #define etm_unlock(t) \

arch/arm/include/asm/kgdb.h

@@ -11,6 +11,7 @@
 #define __ARM_KGDB_H__
 
 #include <linux/ptrace.h>
+#include <asm/opcodes.h>
 
 /*
  * GDB assumes that we're a user process being debugged, so
@@ -41,7 +42,7 @@
 
 static inline void arch_kgdb_breakpoint(void)
 {
-	asm(".word 0xe7ffdeff");
+	asm(__inst_arm(0xe7ffdeff));
 }
 
 extern void kgdb_handle_bus_error(void);

arch/arm/include/asm/mmu.h

@@ -16,7 +16,7 @@ typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID_BITS	8
 #define ASID_MASK	((~0ULL) << ASID_BITS)
-#define ASID(mm)	((mm)->context.id.counter & ~ASID_MASK)
+#define ASID(mm)	((unsigned int)((mm)->context.id.counter & ~ASID_MASK))
 #else
 #define ASID(mm)	(0)
 #endif

arch/arm/include/debug/pl01x.S

@@ -25,12 +25,14 @@
 
 		.macro	waituart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_TXFF
 		bne	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_BUSY
 		bne	1001b
 		.endm

arch/arm/kernel/Makefile

@@ -17,7 +17,8 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y		:= elf.o entry-common.o irq.o opcodes.o \
 		   process.o ptrace.o return_address.o \
-		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
+		   setup.o signal.o sigreturn_codes.o \
+		   stacktrace.o sys_arm.o time.o traps.o
 
 obj-$(CONFIG_ATAGS)		+= atags_parse.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o

arch/arm/kernel/entry-armv.S

@@ -416,9 +416,8 @@ __und_usr:
 	bne	__und_usr_thumb
 	sub	r4, r2, #4			@ ARM instr at LR - 4
 1:	ldrt	r0, [r4]
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r0, r0				@ little endian instruction
-#endif
+ ARM_BE8(rev	r0, r0)				@ little endian instruction
+
 	@ r0 = 32-bit ARM instruction which caused the exception
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction

arch/arm/kernel/entry-common.S

@@ -393,9 +393,7 @@ ENTRY(vector_swi)
 #else
  USER(	ldr	r10, [lr, #-4]		)	@ get SWI instruction
 #endif
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r10, r10			@ little endian instruction
-#endif
+ ARM_BE8(rev	r10, r10)			@ little endian instruction
 
 #elif defined(CONFIG_AEABI)
 

arch/arm/kernel/head.S

@@ -77,6 +77,7 @@
 
 	__HEAD
 ENTRY(stext)
+ ARM_BE8(setend	be )			@ ensure we are in BE8 mode
 
  THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
@@ -352,6 +353,9 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
+
+ ARM_BE8(setend	be)				@ ensure we are in BE8 mode
+
 #ifdef CONFIG_ARM_VIRT_EXT
 	bl	__hyp_stub_install_secondary
 #endif
@@ -602,15 +606,20 @@ __fixup_a_pv_table:
 	b	2f
 1:	add     r7, r3
 	ldrh	ip, [r7, #2]
+ARM_BE8(rev16	ip, ip)
 	tst	ip, #0x4000
 	and	ip, #0x8f00
 	orrne	ip, r6	@ mask in offset bits 31-24
 	orreq	ip, r0	@ mask in offset bits 7-0
+ARM_BE8(rev16	ip, ip)
 	strh	ip, [r7, #2]
-	ldrheq	ip, [r7]
-	biceq	ip, #0x20
-	orreq	ip, ip, r0, lsr #16
-	strheq	ip, [r7]
+	bne	2f
+	ldrh	ip, [r7]
+ARM_BE8(rev16	ip, ip)
+	bic	ip, #0x20
+	orr	ip, ip, r0, lsr #16
+ARM_BE8(rev16	ip, ip)
+	strh	ip, [r7]
 2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
 	bcc	1b
@@ -619,11 +628,20 @@ __fixup_a_pv_table:
 	moveq	r0, #0x400000	@ set bit 22, mov to mvn instruction
 	b	2f
 1:	ldr	ip, [r7, r3]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	@ in BE8, we load data in BE, but instructions still in LE
+	bic	ip, ip, #0xff000000
+	tst	ip, #0x000f0000	@ check the rotation field
+	orrne	ip, ip, r6, lsl #24 @ mask in offset bits 31-24
+	biceq	ip, ip, #0x00004000 @ clear bit 22
+	orreq	ip, ip, r0, lsl #24 @ mask in offset bits 7-0
+#else
 	bic	ip, ip, #0x000000ff
 	tst	ip, #0xf00	@ check the rotation field
 	orrne	ip, ip, r6	@ mask in offset bits 31-24
 	biceq	ip, ip, #0x400000	@ clear bit 22
 	orreq	ip, ip, r0	@ mask in offset bits 7-0
+#endif
 	str	ip, [r7, r3]
 2:	cmp	r4, r5
 	ldrcc	r7, [r4], #4	@ use branch for delay slot

arch/arm/kernel/module.c

@@ -24,6 +24,7 @@
 #include <asm/sections.h>
 #include <asm/smp_plat.h>
 #include <asm/unwind.h>
+#include <asm/opcodes.h>
 
 #ifdef CONFIG_XIP_KERNEL
 /*
@@ -60,6 +61,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		Elf32_Sym *sym;
 		const char *symname;
 		s32 offset;
+		u32 tmp;
 #ifdef CONFIG_THUMB2_KERNEL
 		u32 upper, lower, sign, j1, j2;
 #endif
@@ -95,7 +97,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		case R_ARM_PC24:
 		case R_ARM_CALL:
 		case R_ARM_JUMP24:
-			offset = (*(u32 *)loc & 0x00ffffff) << 2;
+			offset = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = (offset & 0x00ffffff) << 2;
 			if (offset & 0x02000000)
 				offset -= 0x04000000;
 
@@ -111,9 +114,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			}
 
 			offset >>= 2;
+			offset &= 0x00ffffff;
 
-			*(u32 *)loc &= 0xff000000;
-			*(u32 *)loc |= offset & 0x00ffffff;
+			*(u32 *)loc &= __opcode_to_mem_arm(0xff000000);
+			*(u32 *)loc |= __opcode_to_mem_arm(offset);
 			break;
 
 	       case R_ARM_V4BX:
@@ -121,8 +125,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			* other bits to re-code instruction as
 			* MOV PC,Rm.
 			*/
-		       *(u32 *)loc &= 0xf000000f;
-		       *(u32 *)loc |= 0x01a0f000;
+		       *(u32 *)loc &= __opcode_to_mem_arm(0xf000000f);
+		       *(u32 *)loc |= __opcode_to_mem_arm(0x01a0f000);
 		       break;
 
 		case R_ARM_PREL31:
@@ -132,7 +136,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 
 		case R_ARM_MOVW_ABS_NC:
 		case R_ARM_MOVT_ABS:
-			offset = *(u32 *)loc;
+			offset = tmp = __mem_to_opcode_arm(*(u32 *)loc);
 			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
 			offset = (offset ^ 0x8000) - 0x8000;
 
@@ -140,16 +144,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
 				offset >>= 16;
 
-			*(u32 *)loc &= 0xfff0f000;
-			*(u32 *)loc |= ((offset & 0xf000) << 4) |
-					(offset & 0x0fff);
+			tmp &= 0xfff0f000;
+			tmp |= ((offset & 0xf000) << 4) |
+				(offset & 0x0fff);
+
+			*(u32 *)loc = __opcode_to_mem_arm(tmp);
 			break;
 
 #ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
+			upper = __mem_to_opcode_thumb16(*(u16 *)loc);
+			lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
 
 			/*
 			 * 25 bit signed address range (Thumb-2 BL and B.W
@@ -198,17 +204,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			sign = (offset >> 24) & 1;
 			j1 = sign ^ (~(offset >> 23) & 1);
 			j2 = sign ^ (~(offset >> 22) & 1);
-			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+			upper = (u16)((upper & 0xf800) | (sign << 10) |
 					    ((offset >> 12) & 0x03ff));
-			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
-						  (j1 << 13) | (j2 << 11) |
-						  ((offset >> 1) & 0x07ff));
+			lower = (u16)((lower & 0xd000) |
+				      (j1 << 13) | (j2 << 11) |
+				      ((offset >> 1) & 0x07ff));
+
+			*(u16 *)loc = __opcode_to_mem_thumb16(upper);
+			*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
 			break;
 
 		case R_ARM_THM_MOVW_ABS_NC:
 		case R_ARM_THM_MOVT_ABS:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
+			upper = __mem_to_opcode_thumb16(*(u16 *)loc);
+			lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
 
 			/*
 			 * MOVT/MOVW instructions encoding in Thumb-2:
@@ -229,12 +238,14 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
 				offset >>= 16;
 
-			*(u16 *)loc = (u16)((upper & 0xfbf0) |
-					    ((offset & 0xf000) >> 12) |
-					    ((offset & 0x0800) >> 1));
-			*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
-						  ((offset & 0x0700) << 4) |
-						  (offset & 0x00ff));
+			upper = (u16)((upper & 0xfbf0) |
+				      ((offset & 0xf000) >> 12) |
+				      ((offset & 0x0800) >> 1));
+			lower = (u16)((lower & 0x8f00) |
+				      ((offset & 0x0700) << 4) |
+				      (offset & 0x00ff));
+			*(u16 *)loc = __opcode_to_mem_thumb16(upper);
+			*(u16 *)(loc + 2) = __opcode_to_mem_thumb16(lower);
 			break;
 #endif
 

arch/arm/kernel/signal.c

@@ -21,29 +21,7 @@
 #include <asm/unistd.h>
 #include <asm/vfp.h>
 
-/*
- * For ARM syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-#define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-
-/*
- * With EABI, the syscall number has to be loaded into r7.
- */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-/*
- * For Thumb syscalls, we pass the syscall number via r7.  We therefore
- * need two 16-bit instructions.
- */
-#define SWI_THUMB_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define SWI_THUMB_RT_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-static const unsigned long sigreturn_codes[7] = {
-	MOV_R7_NR_SIGRETURN,    SWI_SYS_SIGRETURN,    SWI_THUMB_SIGRETURN,
-	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
-};
+extern const unsigned long sigreturn_codes[7];
 
 static unsigned long signal_return_offset;
 

arch/arm/kernel/sigreturn_codes.S

+/*
+ * sigreturn_codes.S - code sinpets for sigreturn syscalls
+ *
+ * Created by:	Victor Kamensky, 2013-08-13
+ * Copyright:	(C) 2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/unistd.h>
+
+/*
+ * For ARM syscalls, we encode the syscall number into the instruction.
+ * With EABI, the syscall number has to be loaded into r7. As result
+ * ARM syscall sequence snippet will have move and svc in .arm encoding
+ *
+ * For Thumb syscalls, we pass the syscall number via r7.  We therefore
+ * need two 16-bit instructions in .thumb encoding
+ *
+ * Please note sigreturn_codes code are not executed in place. Instead
+ * they just copied by kernel into appropriate places. Code inside of
+ * arch/arm/kernel/signal.c is very sensitive to layout of these code
+ * snippets.
+ */
+
+#if __LINUX_ARM_ARCH__ <= 4
+	/*
+	 * Note we manually set minimally required arch that supports
+	 * required thumb opcodes for early arch versions. It is OK
+	 * for this file to be used in combination with other
+	 * lower arch variants, since these code snippets are only
+	 * used as input data.
+	 */
+	.arch armv4t
+#endif
+
+	.section .rodata
+	.global sigreturn_codes
+	.type	sigreturn_codes, #object
+
+	.arm
+
+sigreturn_codes:
+
+	/* ARM sigreturn syscall code snippet */
+	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
+	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+
+	/* Thumb sigreturn syscall code snippet */
+	.thumb
+	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
+	swi	#0
+
+	/* ARM sigreturn_rt syscall code snippet */
+	.arm
+	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
+	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+
+	/* Thumb sigreturn_rt syscall code snippet */
+	.thumb
+	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
+	swi	#0
+
+	/*
+	 * Note on addtional space: setup_return in signal.c
+	 * algorithm uses two words copy regardless whether
+	 * it is thumb case or not, so we need additional
+	 * word after real last entry.
+	 */
+	.arm
+	.space	4
+
+	.size	sigreturn_codes, . - sigreturn_codes

arch/arm/kernel/sleep.S

@@ -126,6 +126,7 @@ ENDPROC(cpu_resume_after_mmu)
 	.data
 	.align
 ENTRY(cpu_resume)
+ARM_BE8(setend be)			@ ensure we are in BE mode
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)

arch/arm/kernel/smp_scu.c

@@ -28,7 +28,7 @@
  */
 unsigned int __init scu_get_core_count(void __iomem *scu_base)
 {
-	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG);
 	return (ncores & 0x03) + 1;
 }
 
@@ -42,19 +42,19 @@ void scu_enable(void __iomem *scu_base)
 #ifdef CONFIG_ARM_ERRATA_764369
 	/* Cortex-A9 only */
 	if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) {
-		scu_ctrl = __raw_readl(scu_base + 0x30);
+		scu_ctrl = readl_relaxed(scu_base + 0x30);
 		if (!(scu_ctrl & 1))
-			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+			writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30);
 	}
 #endif
 
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl = readl_relaxed(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
 		return;
 
 	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	writel_relaxed(scu_ctrl, scu_base + SCU_CTRL);
 
 	/*
 	 * Ensure that the data accessed by CPU0 before the SCU was
@@ -80,9 +80,9 @@ int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;
 
-	val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
 	val |= mode;
-	__raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
 
 	return 0;
 }

arch/arm/kernel/smp_twd.c

@@ -45,7 +45,7 @@ static void twd_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+		writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
 			twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -58,18 +58,18 @@ static void twd_set_mode(enum clock_event_mode mode,
 		ctrl = 0;
 	}
 
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
 }
 
 static int twd_set_next_event(unsigned long evt,
 			struct clock_event_device *unused)
 {
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+	unsigned long ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
 
 	ctrl |= TWD_TIMER_CONTROL_ENABLE;
 
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(evt, twd_base + TWD_TIMER_COUNTER);
+	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
 
 	return 0;
 }
@@ -82,8 +82,8 @@ static int twd_set_next_event(unsigned long evt,
  */
 static int twd_timer_ack(void)
 {
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+	if (readl_relaxed(twd_base + TWD_TIMER_INTSTAT)) {
+		writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
 		return 1;
 	}
 
@@ -211,15 +211,15 @@ static void twd_calibrate_rate(void)
 		waitjiffies += 5;
 
 				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+		writel_relaxed(0x1, twd_base + TWD_TIMER_CONTROL);
 
 				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+		writel_relaxed(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
 
 		while (get_jiffies_64() < waitjiffies)
 			udelay(10);
 
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+		count = readl_relaxed(twd_base + TWD_TIMER_COUNTER);
 
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
@@ -277,7 +277,7 @@ static void twd_timer_setup(void)
 	 * bother with the below.
 	 */
 	if (per_cpu(percpu_setup_called, cpu)) {
-		__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+		writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
 		clockevents_register_device(clk);
 		enable_percpu_irq(clk->irq, 0);
 		return;
@@ -290,7 +290,7 @@ static void twd_timer_setup(void)
 	 * The following is done once per CPU the first time .setup() is
 	 * called.
 	 */
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
 
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |

arch/arm/kernel/traps.c

@@ -34,6 +34,7 @@
 #include <asm/unwind.h>
 #include <asm/tls.h>
 #include <asm/system_misc.h>
+#include <asm/opcodes.h>
 
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
@@ -341,15 +342,17 @@ void arm_notify_die(const char *str, struct pt_regs *regs,
 int is_valid_bugaddr(unsigned long pc)
 {
 #ifdef CONFIG_THUMB2_KERNEL
-	unsigned short bkpt;
+	u16 bkpt;
+	u16 insn = __opcode_to_mem_thumb16(BUG_INSTR_VALUE);
 #else
-	unsigned long bkpt;
+	u32 bkpt;
+	u32 insn = __opcode_to_mem_arm(BUG_INSTR_VALUE);
 #endif
 
 	if (probe_kernel_address((unsigned *)pc, bkpt))
 		return 0;
 
-	return bkpt == BUG_INSTR_VALUE;
+	return bkpt == insn;
 }
 
 #endif
@@ -402,25 +405,28 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (processor_mode(regs) == SVC_MODE) {
 #ifdef CONFIG_THUMB2_KERNEL
 		if (thumb_mode(regs)) {
-			instr = ((u16 *)pc)[0];
+			instr = __mem_to_opcode_thumb16(((u16 *)pc)[0]);
 			if (is_wide_instruction(instr)) {
-				instr <<= 16;
-				instr |= ((u16 *)pc)[1];
+				u16 inst2;
+				inst2 = __mem_to_opcode_thumb16(((u16 *)pc)[1]);
+				instr = __opcode_thumb32_compose(instr, inst2);
 			}
 		} else
 #endif
-			instr = *(u32 *) pc;
+			instr = __mem_to_opcode_arm(*(u32 *) pc);
 	} else if (thumb_mode(regs)) {
 		if (get_user(instr, (u16 __user *)pc))
 			goto die_sig;
+		instr = __mem_to_opcode_thumb16(instr);
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
 			if (get_user(instr2, (u16 __user *)pc+1))
 				goto die_sig;
-			instr <<= 16;
-			instr |= instr2;
+			instr2 = __mem_to_opcode_thumb16(instr2);
+			instr = __opcode_thumb32_compose(instr, instr2);
 		}
 	} else if (get_user(instr, (u32 __user *)pc)) {
+		instr = __mem_to_opcode_arm(instr);
 		goto die_sig;
 	}
 

arch/arm/kvm/reset.c

@@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = {
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
-	struct kvm_regs *cpu_reset;
+	struct kvm_regs *reset_regs;
 	const struct kvm_irq_level *cpu_vtimer_irq;
 
 	switch (vcpu->arch.target) {
 	case KVM_ARM_TARGET_CORTEX_A15:
 		if (vcpu->vcpu_id > a15_max_cpu_idx)
 			return -EINVAL;
-		cpu_reset = &a15_regs_reset;
+		reset_regs = &a15_regs_reset;
 		vcpu->arch.midr = read_cpuid_id();
 		cpu_vtimer_irq = &a15_vtimer_irq;
 		break;
@@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);

arch/arm/mach-at91/at91rm9200_time.c

@@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91rm9200_timer_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

arch/arm/mach-at91/at91sam926x_time.c

@@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91sam926x_pit_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

arch/arm/mach-at91/at91sam9g45_reset.S

@@ -16,11 +16,17 @@
 #include "at91_rstc.h"
 			.arm
 
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
 			ldr	r5, =at91_ramc_base		@ preload constants
 			ldr	r0, [r5]
+			ldr	r5, [r5, #4]			@ ddr1
+			cmp	r5, #0
 			ldr	r4, =at91_rstc_base
 			ldr	r1, [r4]
 
@@ -30,6 +36,8 @@ at91sam9g45_restart:
 
 			.balign	32				@ align to cache line
 
+			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
+			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
 			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
 			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor

arch/arm/mach-at91/at91x40_time.c

@@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91x40_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= at91x40_timer_interrupt
 };
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
 	.asp_chan_q = EVENTQ_3,
 };
 

arch/arm/mach-davinci/include/mach/serial.h

@@ -15,8 +15,6 @@
 
 #include <mach/hardware.h>
 
-#include <linux/platform_device.h>
-
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
@@ -39,6 +37,8 @@
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
 #ifndef __ASSEMBLY__
+#include <linux/platform_device.h>
+
 extern int davinci_serial_init(struct platform_device *);
 #endif
 

arch/arm/mach-highbank/Kconfig

@@ -4,6 +4,7 @@ config ARCH_HIGHBANK
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_764369

arch/arm/mach-integrator/pci_v3.h

 /* Simple oneliner include to the PCIv3 early init */
+#ifdef CONFIG_PCI
 extern int pci_v3_early_init(void);
+#else
+static inline int pci_v3_early_init(void)
+{
+	return 0;
+}
+#endif

arch/arm/mach-ixp4xx/Kconfig

 if ARCH_IXP4XX
 
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
 menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"

arch/arm/mach-mvebu/Kconfig

 config ARCH_MVEBU
 	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS

arch/arm/mach-mvebu/coherency.c

@@ -140,6 +140,7 @@ int __init coherency_init(void)
 		coherency_base = of_iomap(np, 0);
 		coherency_cpu_base = of_iomap(np, 1);
 		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		of_node_put(np);
 	}
 
 	return 0;
@@ -147,9 +148,14 @@ int __init coherency_init(void)
 
 static int __init coherency_late_init(void)
 {
-	if (of_find_matching_node(NULL, of_coherency_table))
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
 		bus_register_notifier(&platform_bus_type,
 				      &mvebu_hwcc_platform_nb);
+		of_node_put(np);
+	}
 	return 0;
 }
 

arch/arm/mach-mvebu/coherency_ll.S

@@ -20,6 +20,8 @@
 #define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
 #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
 
+#include <asm/assembler.h>
+
 	.text
 /*
  * r0: Coherency fabric base register address
@@ -29,6 +31,7 @@ ENTRY(ll_set_cpu_coherent)
 	/* Create bit by cpu index */
 	mov	r3, #(1 << 24)
 	lsl	r1, r3, r1
+ARM_BE8(rev	r1, r1)
 
 	/* Add CPU to SMP group - Atomic */
 	add	r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET

arch/arm/mach-mvebu/headsmp.S

@@ -21,12 +21,16 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 /*
  * Armada XP specific entry point for secondary CPUs.
  * We add the CPU to the coherency fabric and then jump to secondary
  * startup
  */
 ENTRY(armada_xp_secondary_startup)
+ ARM_BE8(setend	be )			@ go BE8 if entered LE
+
 	/* Get coherency fabric base physical address */
 	adr	r0, 1f
 	ldr	r1, [r0]

arch/arm/mach-mvebu/pmsu.c

@@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
 		pr_info("Initializing Power Management Service Unit\n");
 		pmsu_mp_base = of_iomap(np, 0);
 		pmsu_reset_base = of_iomap(np, 1);
+		of_node_put(np);
 	}
 
 	return 0;

arch/arm/mach-mvebu/system-controller.c

@@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
 		BUG_ON(!match);
 		system_controller_base = of_iomap(np, 0);
 		mvebu_sc = (struct mvebu_system_controller *)match->data;
+		of_node_put(np);
 	}
 
 	return 0;

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
 				  "fsib_mclk_in", "fsib"),
 	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_int", "gether"),
 	/* HDMI */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",

arch/arm/mach-shmobile/board-lager.c

@@ -29,6 +29,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
@@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void)
 					  &ether_pdata, sizeof(ether_pdata));
 }
 
+/*
+ * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int lager_ksz8041_fixup(struct phy_device *phydev)
+{
+	u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+	phyctrl1 &= ~0xc000;
+	phyctrl1 |= 0x4000;
+	return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init lager_init(void)
+{
+	lager_add_standard_devices();
+
+	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
+}
+
 static const char *lager_boards_compat_dt[] __initdata = {
 	"renesas,lager",
 	NULL,
@@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(LAGER_DT, "lager")
 	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
-	.init_machine	= lager_add_standard_devices,
+	.init_machine	= lager_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END

arch/arm/mach-vexpress/Kconfig

 config ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804

arch/arm/mach-vexpress/tc2_pm.c

@@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency)
 	} else
 		BUG();
 
+	/*
+	 * If the CPU is committed to power down, make sure
+	 * the power controller will be in charge of waking it
+	 * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+	 * to the CPU by disabling the GIC CPU IF to prevent wfi
+	 * from completing execution behind power controller back
+	 */
+	if (!skip_wfi)
+		gic_cpu_if_down();
+
 	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
 		arch_spin_unlock(&tc2_pm_lock);
 
@@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency)
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
-	gic_cpu_if_down();
 	tc2_pm_down(residency);
 }
 

arch/arm/mm/Kconfig

@@ -952,3 +952,9 @@ config ARCH_HAS_BARRIERS
 	help
 	  This option allows the use of custom mandatory barriers
 	  included via the mach/barriers.h file.
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	help
+	  This option specifies the architecture can support big endian
+	  operation.

arch/arm/mm/abort-ev6.S

@@ -38,9 +38,8 @@ ENTRY(v6_early_abort)
 	bne	do_DataAbort
 	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
 	ldr	r3, [r4]			@ read aborted ARM instruction
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r3, r3
-#endif
+ ARM_BE8(rev	r3, r3)
+
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.

arch/arm/mm/alignment.c

@@ -25,6 +25,7 @@
 #include <asm/cp15.h>
 #include <asm/system_info.h>
 #include <asm/unaligned.h>
+#include <asm/opcodes.h>
 
 #include "fault.h"
 
@@ -762,21 +763,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (thumb_mode(regs)) {
 		u16 *ptr = (u16 *)(instrptr & ~1);
 		fault = probe_kernel_address(ptr, tinstr);
+		tinstr = __mem_to_opcode_thumb16(tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
 				u16 tinst2 = 0;
 				fault = probe_kernel_address(ptr + 1, tinst2);
-				instr = (tinstr << 16) | tinst2;
+				tinst2 = __mem_to_opcode_thumb16(tinst2);
+				instr = __opcode_thumb32_compose(tinstr, tinst2);
 				thumb2_32b = 1;
 			} else {
 				isize = 2;
 				instr = thumb2arm(tinstr);
 			}
 		}
-	} else
+	} else {
 		fault = probe_kernel_address(instrptr, instr);
+		instr = __mem_to_opcode_arm(instr);
+	}
 
 	if (fault) {
 		type = TYPE_FAULT;

arch/arm/mm/proc-v6.S

@@ -220,9 +220,7 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them

arch/arm/mm/proc-v7.S

@@ -367,9 +367,7 @@ __v7_setup:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 #ifdef CONFIG_SWP_EMULATE
 	orr     r5, r5, #(1 << 10)              @ set SW bit in "clear"
 	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"

arch/arm/net/bpf_jit_32.c

@@ -19,6 +19,7 @@
 #include <linux/if_vlan.h>
 #include <asm/cacheflush.h>
 #include <asm/hwcap.h>
+#include <asm/opcodes.h>
 
 #include "bpf_jit_32.h"
 
@@ -113,8 +114,11 @@ static u32 jit_udiv(u32 dividend, u32 divisor)
 
 static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
 {
+	inst |= (cond << 28);
+	inst = __opcode_to_mem_arm(inst);
+
 	if (ctx->target != NULL)
-		ctx->target[ctx->idx] = inst | (cond << 28);
+		ctx->target[ctx->idx] = inst;
 
 	ctx->idx++;
 }

arch/arm/plat-versatile/headsmp.S

@@ -10,6 +10,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 /*
  * Realview/Versatile Express specific entry point for secondary CPUs.
@@ -17,6 +18,7 @@
  * until we're ready for them to initialise.
  */
 ENTRY(versatile_secondary_startup)
+ ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	bic	r0, #0xff000000
 	adr	r4, 1f

arch/arm64/Kconfig.debug

@@ -6,13 +6,6 @@ config FRAME_POINTER
 	bool
 	default y
 
-config DEBUG_STACK_USAGE
-	bool "Enable stack utilization instrumentation"
-	depends on DEBUG_KERNEL
-	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T output.
-
 config EARLY_PRINTK
 	bool "Early printk support"
 	default y

arch/arm64/configs/defconfig

@@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -72,6 +72,7 @@ CONFIG_LOGO=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_FUSE_FS=y
@@ -90,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_BLK=y

arch/arm64/include/asm/uaccess.h

@@ -166,9 +166,10 @@ do {									\
 
 #define get_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ?			\
-		__get_user((x), (ptr)) :				\
+	access_ok(VERIFY_READ, __p, sizeof(*__p)) ?			\
+		__get_user((x), __p) :					\
 		((x) = 0, -EFAULT);					\
 })
 
@@ -227,9 +228,10 @@ do {									\
 
 #define put_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ?		\
-		__put_user((x), (ptr)) :				\
+	access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ?			\
+		__put_user((x), __p) :					\
 		-EFAULT;						\
 })
 

arch/arm64/kernel/fpsimd.c

@@ -80,8 +80,10 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 void fpsimd_flush_thread(void)
 {
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_load_state(&current->thread.fpsimd_state);
+	preempt_enable();
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON

arch/arm64/mm/tlb.S

@@ -35,7 +35,7 @@
  */
 ENTRY(__cpu_flush_user_tlb_range)
 	vma_vm_mm x3, x2			// get vma->vm_mm
-	mmid	x3, x3				// get vm_mm->context.id
+	mmid	w3, x3				// get vm_mm->context.id
 	dsb	sy
 	lsr	x0, x0, #12			// align address
 	lsr	x1, x1, #12

arch/avr32/include/asm/Kbuild

 
 generic-y	+= clkdev.h
+generic-y       += cputime.h
+generic-y       += delay.h
+generic-y       += device.h
+generic-y       += div64.h
+generic-y       += emergency-restart.h
 generic-y	+= exec.h
-generic-y	+= trace_clock.h
+generic-y       += futex.h
+generic-y       += irq_regs.h
 generic-y	+= param.h
+generic-y       += local.h
+generic-y       += local64.h
+generic-y       += percpu.h
+generic-y       += scatterlist.h
+generic-y       += sections.h
+generic-y       += topology.h
+generic-y	+= trace_clock.h
+generic-y       += xor.h

arch/avr32/include/asm/cputime.h

-#ifndef __ASM_AVR32_CPUTIME_H
-#define __ASM_AVR32_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ASM_AVR32_CPUTIME_H */

arch/avr32/include/asm/delay.h

-#include <asm-generic/delay.h>

arch/avr32/include/asm/device.h

-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-

arch/avr32/include/asm/div64.h

-#ifndef __ASM_AVR32_DIV64_H
-#define __ASM_AVR32_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* __ASM_AVR32_DIV64_H */

arch/avr32/include/asm/emergency-restart.h

-#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
-#define __ASM_AVR32_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */

arch/avr32/include/asm/futex.h

-#ifndef __ASM_AVR32_FUTEX_H
-#define __ASM_AVR32_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif /* __ASM_AVR32_FUTEX_H */

arch/avr32/include/asm/irq_regs.h

-#include <asm-generic/irq_regs.h>

arch/avr32/include/asm/local.h

-#ifndef __ASM_AVR32_LOCAL_H
-#define __ASM_AVR32_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_AVR32_LOCAL_H */

arch/avr32/include/asm/local64.h

-#include <asm-generic/local64.h>

arch/avr32/include/asm/percpu.h

-#ifndef __ASM_AVR32_PERCPU_H
-#define __ASM_AVR32_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_AVR32_PERCPU_H */

arch/avr32/include/asm/scatterlist.h

-#ifndef __ASM_AVR32_SCATTERLIST_H
-#define __ASM_AVR32_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_AVR32_SCATTERLIST_H */

arch/avr32/include/asm/sections.h

-#ifndef __ASM_AVR32_SECTIONS_H
-#define __ASM_AVR32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* __ASM_AVR32_SECTIONS_H */

arch/avr32/include/asm/topology.h

-#ifndef __ASM_AVR32_TOPOLOGY_H
-#define __ASM_AVR32_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* __ASM_AVR32_TOPOLOGY_H */

arch/avr32/include/asm/xor.h

-#ifndef _ASM_XOR_H
-#define _ASM_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif

arch/avr32/kernel/process.c

@@ -289,7 +289,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		memset(childregs, 0, sizeof(struct pt_regs));
 		p->thread.cpu_context.r0 = arg;
 		p->thread.cpu_context.r1 = usp; /* fn */
-		p->thread.cpu_context.r2 = syscall_return;
+		p->thread.cpu_context.r2 = (unsigned long)syscall_return;
 		p->thread.cpu_context.pc = (unsigned long)ret_from_kernel_thread;
 		childregs->sr = MODE_SUPERVISOR;
 	} else {

arch/avr32/kernel/time.c

@@ -98,7 +98,14 @@ static void comparator_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		sysreg_write(COMPARE, 0);
 		pr_debug("%s: stop\n", evdev->name);
-		cpu_idle_poll_ctrl(false);
+		if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
+		    evdev->mode == CLOCK_EVT_MODE_RESUME) {
+			/*
+			 * Only disable idle poll if we have forced that
+			 * in a previous call.
+			 */
+			cpu_idle_poll_ctrl(false);
+		}
 		break;
 	default:
 		BUG();

arch/mips/alchemy/board-mtx1.c

@@ -276,7 +276,7 @@ static struct platform_device mtx1_pci_host = {
 	.resource	= alchemy_pci_host_res,
 };
 
-static struct __initdata platform_device * mtx1_devs[] = {
+static struct platform_device *mtx1_devs[] __initdata = {
 	&mtx1_pci_host,
 	&mtx1_gpio_leds,
 	&mtx1_wdt,

arch/mips/mm/c-r4k.c

@@ -609,6 +609,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 			r4k_blast_scache();
 		else
 			blast_scache_range(addr, addr + size);
+		preempt_enable();
 		__sync();
 		return;
 	}
@@ -650,6 +651,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 			 */
 			blast_inv_scache_range(addr, addr + size);
 		}
+		preempt_enable();
 		__sync();
 		return;
 	}

arch/parisc/mm/fault.c

@@ -182,6 +182,9 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
 
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
+
+	acc_type = parisc_acctyp(code, regs->iir);
+
 	if (acc_type & VM_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 retry:
@@ -196,8 +199,6 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
 
 good_area:
 
-	acc_type = parisc_acctyp(code,regs->iir);
-
 	if ((vma->vm_flags & acc_type) != acc_type)
 		goto bad_area;