ARM: at91/dt: sama5d4: use slow clock where necessary

The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

arch/arm/boot/dts/sama5d4.dtsi

@@ -957,8 +957,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf801c000 0x100>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			macb0: ethernet@f8020000 {
@@ -1185,8 +1185,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xfc020000 0x100>;
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			adc0: adc@fc034000 {
@@ -1270,11 +1270,13 @@
 			rstc@fc068600 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fc068610 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fc068630 {
@@ -1287,6 +1289,7 @@
 			watchdog@fc068640 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfc068640 0x10>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1320,6 +1323,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfc0686b0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 			};
 
 			dbgu: serial@fc069000 {