Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
提交 153b1e1f 编写于 作者: J James Bottomley
浏览文件
操作

Automatic merge of ../scsi-misc-2.6-old/

上级 cdbbde14 c3e9dda4
展开全部 隐藏空白更改
内联 并排
Showing with 12281 addition and 17697 deletion
Documentation/DocBook/Makefile
浏览文件 @ 153b1e1f
......@@ -8,7 +8,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml scsidrivers.xml \
procfs-guide.xml writing_usb_driver.xml \
sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml
......
Documentation/DocBook/scsidrivers.tmpl 已删除 100644 → 0
浏览文件 @ cdbbde14
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="scsidrivers">
<bookinfo>
<title>SCSI Subsystem Interfaces</title>
<authorgroup>
<author>
<firstname>Douglas</firstname>
<surname>Gilbert</surname>
<affiliation>
<address>
<email>dgilbert@interlog.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<pubdate>2003-08-11</pubdate>
<copyright>
<year>2002</year>
<year>2003</year>
<holder>Douglas Gilbert</holder>
</copyright>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="intro">
<title>Introduction</title>
<para>
This document outlines the interface between the Linux scsi mid level
and lower level drivers. Lower level drivers are variously called HBA
(host bus adapter) drivers, host drivers (HD) or pseudo adapter drivers.
The latter alludes to the fact that a lower level driver may be a
bridge to another IO subsystem (and the "ide-scsi" driver is an example
of this). There can be many lower level drivers active in a running
system, but only one per hardware type. For example, the aic7xxx driver
controls adaptec controllers based on the 7xxx chip series. Most lower
level drivers can control one or more scsi hosts (a.k.a. scsi initiators).
</para>
<para>
This document can been found in an ASCII text file in the linux kernel
source: <filename>Documentation/scsi/scsi_mid_low_api.txt</filename> .
It currently hold a little more information than this document. The
<filename>drivers/scsi/hosts.h</filename> and <filename>
drivers/scsi/scsi.h</filename> headers contain descriptions of members
of important structures for the scsi subsystem.
</para>
</chapter>
<chapter id="driver-struct">
<title>Driver structure</title>
<para>
Traditionally a lower level driver for the scsi subsystem has been
at least two files in the drivers/scsi directory. For example, a
driver called "xyz" has a header file "xyz.h" and a source file
"xyz.c". [Actually there is no good reason why this couldn't all
be in one file.] Some drivers that have been ported to several operating
systems (e.g. aic7xxx which has separate files for generic and
OS-specific code) have more than two files. Such drivers tend to have
their own directory under the drivers/scsi directory.
</para>
<para>
scsi_module.c is normally included at the end of a lower
level driver. For it to work a declaration like this is needed before
it is included:
<programlisting>
static Scsi_Host_Template driver_template = DRIVER_TEMPLATE;
/* DRIVER_TEMPLATE should contain pointers to supported interface
functions. Scsi_Host_Template is defined hosts.h */
#include "scsi_module.c"
</programlisting>
</para>
<para>
The scsi_module.c assumes the name "driver_template" is appropriately
defined. It contains 2 functions:
<orderedlist>
<listitem><para>
init_this_scsi_driver() called during builtin and module driver
initialization: invokes mid level's scsi_register_host()
</para></listitem>
<listitem><para>
exit_this_scsi_driver() called during closedown: invokes
mid level's scsi_unregister_host()
</para></listitem>
</orderedlist>
</para>
<para>
When a new, lower level driver is being added to Linux, the following
files (all found in the drivers/scsi directory) will need some attention:
Makefile, Config.help and Config.in . It is probably best to look at what
an existing lower level driver does in this regard.
</para>
</chapter>
<chapter id="intfunctions">
<title>Interface Functions</title>
!EDocumentation/scsi/scsi_mid_low_api.txt
</chapter>
<chapter id="locks">
<title>Locks</title>
<para>
Each Scsi_Host instance has a spin_lock called Scsi_Host::default_lock
which is initialized in scsi_register() [found in hosts.c]. Within the
same function the Scsi_Host::host_lock pointer is initialized to point
at default_lock with the scsi_assign_lock() function. Thereafter
lock and unlock operations performed by the mid level use the
Scsi_Host::host_lock pointer.
</para>
<para>
Lower level drivers can override the use of Scsi_Host::default_lock by
using scsi_assign_lock(). The earliest opportunity to do this would
be in the detect() function after it has invoked scsi_register(). It
could be replaced by a coarser grain lock (e.g. per driver) or a
lock of equal granularity (i.e. per host). Using finer grain locks
(e.g. per scsi device) may be possible by juggling locks in
queuecommand().
</para>
</chapter>
<chapter id="changes">
<title>Changes since lk 2.4 series</title>
<para>
io_request_lock has been replaced by several finer grained locks. The lock
relevant to lower level drivers is Scsi_Host::host_lock and there is one
per scsi host.
</para>
<para>
The older error handling mechanism has been removed. This means the
lower level interface functions abort() and reset() have been removed.
</para>
<para>
In the 2.4 series the scsi subsystem configuration descriptions were
aggregated with the configuration descriptions from all other Linux
subsystems in the Documentation/Configure.help file. In the 2.5 series,
the scsi subsystem now has its own (much smaller) drivers/scsi/Config.help
file.
</para>
</chapter>
<chapter id="credits">
<title>Credits</title>
<para>
The following people have contributed to this document:
<orderedlist>
<listitem><para>
Mike Anderson <email>andmike@us.ibm.com</email>
</para></listitem>
<listitem><para>
James Bottomley <email>James.Bottomley@steeleye.com</email>
</para></listitem>
<listitem><para>
Patrick Mansfield <email>patmans@us.ibm.com</email>
</para></listitem>
</orderedlist>
</para>
</chapter>
</book>
Documentation/scsi/ChangeLog.megaraid
浏览文件 @ 153b1e1f
Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
1. Added IOCTL backward compatibility.
Convert megaraid_mm driver to new compat_ioctl entry points.
I don't have easy access to hardware, so only compile tested.
- Signed-off-by:Andi Kleen <ak@muc.de>
2. megaraid_mbox fix: wrong order of arguments in memset()
That, BTW, shows why cross-builds are useful-the only indication of
problem had been a new warning showing up in sparse output on alpha
build (number of exceeding 256 got truncated).
- Signed-off-by: Al Viro
<viro@parcelfarce.linux.theplanet.co.uk>
3. Convert pci_module_init to pci_register_driver
Convert from pci_module_init to pci_register_driver
(from:http://kerneljanitors.org/TODO)
- Signed-off-by: Domen Puncer <domen@coderock.org>
4. Use the pre defined DMA mask constants from dma-mapping.h
Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistend_dma_mask(). See
http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more
details.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Domen Puncer <domen@coderock.org>
5. Remove SSID checking for Dobson, Lindsay, and Verde based products.
Checking the SSVID/SSID for controllers which have Dobson, Lindsay,
and Verde is unnecessary because device ID has been assigned by LSI
and it is unique value. So, all controllers with these IOPs have to be
supported by the driver regardless SSVID/SSID.
6. Date Thu, 27 Jan 2005 04:31:09 +0100
From Herbert Poetzl <>
Subject RFC: assert_spin_locked() for 2.6
Greetings!
overcautious programming will kill your kernel ;)
ever thought about checking a spin_lock or even
asserting that it must be held (maybe just for
spinlock debugging?) ...
there are several checks present in the kernel
where somebody does a variation on the following:
BUG_ON(!spin_is_locked(&some_lock));
so what's wrong about that? nothing, unless you
compile the code with CONFIG_DEBUG_SPINLOCK but
without CONFIG_SMP ... in which case the BUG()
will kill your kernel ...
maybe it's not advised to make such assertions,
but here is a solution which works for me ...
(compile tested for sh, x86_64 and x86, boot/run
tested for x86 only)
best,
Herbert
- Herbert Poetzl <herbert@13thfloor.at>, Thu, 27 Jan 2005
Release Date : Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
Older Version : 2.20.4.4 (scsi module), 2.20.2.4 (cmm module)
......
Documentation/scsi/scsi-changer.txt 0 → 100644
浏览文件 @ 153b1e1f
README for the SCSI media changer driver
========================================
This is a driver for SCSI Medium Changer devices, which are listed
with "Type: Medium Changer" in /proc/scsi/scsi.
This is for *real* Jukeboxes. It is *not* supported to work with
common small CD-ROM changers, neither one-lun-per-slot SCSI changers
nor IDE drives.
Userland tools available from here:
http://linux.bytesex.org/misc/changer.html
General Information
-------------------
First some words about how changers work: A changer has 2 (possibly
more) SCSI ID's. One for the changer device which controls the robot,
and one for the device which actually reads and writes the data. The
later may be anything, a MOD, a CD-ROM, a tape or whatever. For the
changer device this is a "don't care", he *only* shuffles around the
media, nothing else.
The SCSI changer model is complex, compared to - for example - IDE-CD
changers. But it allows to handle nearly all possible cases. It knows
4 different types of changer elements:
media transport - this one shuffles around the media, i.e. the
transport arm. Also known as "picker".
storage - a slot which can hold a media.
import/export - the same as above, but is accessable from outside,
i.e. there the operator (you !) can use this to
fill in and remove media from the changer.
Sometimes named "mailslot".
data transfer - this is the device which reads/writes, i.e. the
CD-ROM / Tape / whatever drive.
None of these is limited to one: A huge Jukebox could have slots for
123 CD-ROM's, 5 CD-ROM readers (and therefore 6 SCSI ID's: the changer
and each CD-ROM) and 2 transport arms. No problem to handle.
How it is implemented
---------------------
I implemented the driver as character device driver with a NetBSD-like
ioctl interface. Just grabbed NetBSD's header file and one of the
other linux SCSI device drivers as starting point. The interface
should be source code compatible with NetBSD. So if there is any
software (anybody knows ???) which supports a BSDish changer driver,
it should work with this driver too.
Over time a few more ioctls where added, volume tag support for example
wasn't covered by the NetBSD ioctl API.
Current State
-------------
Support for more than one transport arm is not implemented yet (and
nobody asked for it so far...).
I test and use the driver myself with a 35 slot cdrom jukebox from
Grundig. I got some reports telling it works ok with tape autoloaders
(Exabyte, HP and DEC). Some People use this driver with amanda. It
works fine with small (11 slots) and a huge (4 MOs, 88 slots)
magneto-optical Jukebox. Probably with lots of other changers too, most
(but not all :-) people mail me only if it does *not* work...
I don't have any device lists, neither black-list nor white-list. Thus
it is quite useless to ask me whenever a specific device is supported or
not. In theory every changer device which supports the SCSI-2 media
changer command set should work out-of-the-box with this driver. If it
doesn't, it is a bug. Either within the driver or within the firmware
of the changer device.
Using it
--------
This is a character device with major number is 86, so use
"mknod /dev/sch0 c 86 0" to create the special file for the driver.
If the module finds the changer, it prints some messages about the
device [ try "dmesg" if you don't see anything ] and should show up in
/proc/devices. If not.... some changers use ID ? / LUN 0 for the
device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
look for LUN's other than 0 as default, becauce there are to many
broken devices. So you can try:
1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
(replace ID with the SCSI-ID of the device)
2) boot the kernel with "max_scsi_luns=1" on the command line
(append="max_scsi_luns=1" in lilo.conf should do the trick)
Trouble?
--------
If you insmod the driver with "insmod debug=1", it will be verbose and
prints a lot of stuff to the syslog. Compiling the kernel with
CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot
because the kernel will translate the error codes into human-readable
strings then.
You can display these messages with the dmesg command (or check the
logfiles). If you email me some question becauce of a problem with the
driver, please include these messages.
Insmod options
--------------
debug=0/1
Enable debug messages (see above, default: 0).
verbose=0/1
Be verbose (default: 1).
init=0/1
Send INITIALIZE ELEMENT STATUS command to the changer
at insmod time (default: 1).
timeout_init=<seconds>
timeout for the INITIALIZE ELEMENT STATUS command
(default: 3600).
timeout_move=<seconds>
timeout for all other commands (default: 120).
dt_id=<id1>,<id2>,...
dt_lun=<lun1>,<lun2>,...
These two allow to specify the SCSI ID and LUN for the data
transfer elements. You likely don't need this as the jukebox
should provide this information. But some devices don't ...
vendor_firsts=
vendor_counts=
vendor_labels=
These insmod options can be used to tell the driver that there
are some vendor-specific element types. Grundig for example
does this. Some jukeboxes have a printer to label fresh burned
CDs, which is addressed as element 0xc000 (type 5). To tell the
driver about this vendor-specific element, use this:
$ insmod ch \
vendor_firsts=0xc000 \
vendor_counts=1 \
vendor_labels=printer
All three insmod options accept up to four comma-separated
values, this way you can configure the element types 5-8.
You likely need the SCSI specs for the device in question to
find the correct values as they are not covered by the SCSI-2
standard.
Credits
-------
I wrote this driver using the famous mailing-patches-around-the-world
method. With (more or less) help from:
Daniel Moehwald <moehwald@hdg.de>
Dane Jasper <dane@sonic.net>
R. Scott Bailey <sbailey@dsddi.eds.com>
Jonathan Corbet <corbet@lwn.net>
Special thanks go to
Martin Kuehne <martin.kuehne@bnbt.de>
for a old, second-hand (but full functional) cdrom jukebox which I use
to develop/test driver and tools now.
Have fun,
Gerd
--
Gerd Knorr <kraxel@bytesex.org>
drivers/block/elevator.c
浏览文件 @ 153b1e1f
......@@ -290,6 +290,13 @@ void elv_requeue_request(request_queue_t *q, struct request *rq)
rq = rq->end_io_data;
}
/*
* the request is prepped and may have some resources allocated.
* allowing unprepped requests to pass this one may cause resource
* deadlock. turn on softbarrier.
*/
rq->flags |= REQ_SOFTBARRIER;
/*
* if iosched has an explicit requeue hook, then use that. otherwise
* just put the request at the front of the queue
......@@ -386,6 +393,12 @@ struct request *elv_next_request(request_queue_t *q)
if (ret == BLKPREP_OK) {
break;
} else if (ret == BLKPREP_DEFER) {
/*
* the request may have been (partially) prepped.
* we need to keep this request in the front to
* avoid resource deadlock. turn on softbarrier.
*/
rq->flags |= REQ_SOFTBARRIER;
rq = NULL;
break;
} else if (ret == BLKPREP_KILL) {
......
drivers/block/ll_rw_blk.c
浏览文件 @ 153b1e1f
......@@ -2038,7 +2038,6 @@ EXPORT_SYMBOL(blk_requeue_request);
* @rq: request to be inserted
* @at_head: insert request at head or tail of queue
* @data: private data
* @reinsert: true if request it a reinsertion of previously processed one
*
* Description:
* Many block devices need to execute commands asynchronously, so they don't
......@@ -2053,8 +2052,9 @@ EXPORT_SYMBOL(blk_requeue_request);
* host that is unable to accept a particular command.
*/
void blk_insert_request(request_queue_t *q, struct request *rq,
int at_head, void *data, int reinsert)
int at_head, void *data)
{
int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
unsigned long flags;
/*
......@@ -2071,20 +2071,12 @@ void blk_insert_request(request_queue_t *q, struct request *rq,
/*
* If command is tagged, release the tag
*/
if (reinsert)
blk_requeue_request(q, rq);
else {
int where = ELEVATOR_INSERT_BACK;
if (at_head)
where = ELEVATOR_INSERT_FRONT;
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
drive_stat_acct(rq, rq->nr_sectors, 1);
__elv_add_request(q, rq, where, 0);
drive_stat_acct(rq, rq->nr_sectors, 1);
__elv_add_request(q, rq, where, 0);
}
if (blk_queue_plugged(q))
__generic_unplug_device(q);
else
......
drivers/block/paride/pd.c
浏览文件 @ 153b1e1f
......@@ -723,7 +723,7 @@ static int pd_special_command(struct pd_unit *disk,
rq.ref_count = 1;
rq.waiting = &wait;
rq.end_io = blk_end_sync_rq;
blk_insert_request(disk->gd->queue, &rq, 0, func, 0);
blk_insert_request(disk->gd->queue, &rq, 0, func);
wait_for_completion(&wait);
rq.waiting = NULL;
if (rq.errors)
......
drivers/block/sx8.c
浏览文件 @ 153b1e1f
......@@ -614,7 +614,7 @@ static int carm_array_info (struct carm_host *host, unsigned int array_idx)
spin_unlock_irq(&host->lock);
DPRINTK("blk_insert_request, tag == %u\n", idx);
blk_insert_request(host->oob_q, crq->rq, 1, crq, 0);
blk_insert_request(host->oob_q, crq->rq, 1, crq);
return 0;
......@@ -653,7 +653,7 @@ static int carm_send_special (struct carm_host *host, carm_sspc_t func)
crq->msg_bucket = (u32) rc;
DPRINTK("blk_insert_request, tag == %u\n", idx);
blk_insert_request(host->oob_q, crq->rq, 1, crq, 0);
blk_insert_request(host->oob_q, crq->rq, 1, crq);
return 0;
}
......
drivers/ieee1394/sbp2.c
浏览文件 @ 153b1e1f
......@@ -1070,7 +1070,7 @@ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_
static __inline__ int sbp2_command_conversion_device_type(u8 device_type)
{
return (((device_type == TYPE_DISK) ||
(device_type == TYPE_SDAD) ||
(device_type == TYPE_RBC) ||
(device_type == TYPE_ROM)) ? 1:0);
}
......@@ -2111,102 +2111,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
*/
static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd)
{
unchar new_cmd[16];
u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun);
SBP2_DEBUG("sbp2_check_sbp2_command");
switch (*cmd) {
case READ_6:
if (sbp2_command_conversion_device_type(device_type)) {
SBP2_DEBUG("Convert READ_6 to READ_10");
/*
* Need to turn read_6 into read_10
*/
new_cmd[0] = 0x28;
new_cmd[1] = (cmd[1] & 0xe0);
new_cmd[2] = 0x0;
new_cmd[3] = (cmd[1] & 0x1f);
new_cmd[4] = cmd[2];
new_cmd[5] = cmd[3];
new_cmd[6] = 0x0;
new_cmd[7] = 0x0;
new_cmd[8] = cmd[4];
new_cmd[9] = cmd[5];
memcpy(cmd, new_cmd, 10);
}
break;
case WRITE_6:
if (sbp2_command_conversion_device_type(device_type)) {
SBP2_DEBUG("Convert WRITE_6 to WRITE_10");
/*
* Need to turn write_6 into write_10
*/
new_cmd[0] = 0x2a;
new_cmd[1] = (cmd[1] & 0xe0);
new_cmd[2] = 0x0;
new_cmd[3] = (cmd[1] & 0x1f);
new_cmd[4] = cmd[2];
new_cmd[5] = cmd[3];
new_cmd[6] = 0x0;
new_cmd[7] = 0x0;
new_cmd[8] = cmd[4];
new_cmd[9] = cmd[5];
memcpy(cmd, new_cmd, 10);
}
break;
case MODE_SENSE:
if (sbp2_command_conversion_device_type(device_type)) {
SBP2_DEBUG("Convert MODE_SENSE_6 to MODE_SENSE_10");
/*
* Need to turn mode_sense_6 into mode_sense_10
*/
new_cmd[0] = 0x5a;
new_cmd[1] = cmd[1];
new_cmd[2] = cmd[2];
new_cmd[3] = 0x0;
new_cmd[4] = 0x0;
new_cmd[5] = 0x0;
new_cmd[6] = 0x0;
new_cmd[7] = 0x0;
new_cmd[8] = cmd[4];
new_cmd[9] = cmd[5];
memcpy(cmd, new_cmd, 10);
}
break;
case MODE_SELECT:
/*
* TODO. Probably need to change mode select to 10 byte version
*/
default:
break;
}
return;
}
/*
......@@ -2247,7 +2151,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *SCpnt)
{
u8 *scsi_buf = SCpnt->request_buffer;
u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun);
SBP2_DEBUG("sbp2_check_sbp2_response");
......@@ -2271,14 +2174,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
scsi_buf[4] = 36 - 5;
}
/*
* Check for Simple Direct Access Device and change it to TYPE_DISK
*/
if ((scsi_buf[0] & 0x1f) == TYPE_SDAD) {
SBP2_DEBUG("Changing TYPE_SDAD to TYPE_DISK");
scsi_buf[0] &= 0xe0;
}
/*
* Fix ansi revision and response data format
*/
......@@ -2287,27 +2182,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
break;
case MODE_SENSE:
if (sbp2_command_conversion_device_type(device_type)) {
SBP2_DEBUG("Modify mode sense response (10 byte version)");
scsi_buf[0] = scsi_buf[1]; /* Mode data length */
scsi_buf[1] = scsi_buf[2]; /* Medium type */
scsi_buf[2] = scsi_buf[3]; /* Device specific parameter */
scsi_buf[3] = scsi_buf[7]; /* Block descriptor length */
memcpy(scsi_buf + 4, scsi_buf + 8, scsi_buf[0]);
}
break;
case MODE_SELECT:
/*
* TODO. Probably need to change mode select to 10 byte version
*/
default:
break;
}
......@@ -2690,7 +2564,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
static int sbp2scsi_slave_configure (struct scsi_device *sdev)
{
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
return 0;
}
......
drivers/ieee1394/sbp2.h
浏览文件 @ 153b1e1f
......@@ -266,10 +266,6 @@ struct sbp2_status_block {
#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#ifndef TYPE_SDAD
#define TYPE_SDAD 0x0e /* simplified direct access device */
#endif
/*
* SCSI direction table...
* (now used as a back-up in case the direction passed down from above is "unknown")
......
drivers/message/fusion/Kconfig
浏览文件 @ 153b1e1f
......@@ -2,34 +2,54 @@
menu "Fusion MPT device support"
config FUSION
tristate "Fusion MPT (base + ScsiHost) drivers"
bool
default n
config FUSION_SPI
tristate "Fusion MPT ScsiHost drivers for SPI"
depends on PCI && SCSI
select FUSION
---help---
SCSI HOST support for a parallel SCSI host adapters.
List of supported controllers:
LSI53C1020
LSI53C1020A
LSI53C1030
LSI53C1035
config FUSION_FC
tristate "Fusion MPT ScsiHost drivers for FC"
depends on PCI && SCSI
select FUSION
---help---
LSI Logic Fusion(TM) Message Passing Technology (MPT) device support
provides high performance SCSI host initiator, and LAN [1] interface
services to a host system. The Fusion architecture is capable of
duplexing these protocols on high-speed Fibre Channel
(up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320)
physical medium.
SCSI HOST support for a Fiber Channel host adapters.
[1] LAN is not supported on parallel SCSI medium.
List of supported controllers:
LSIFC909
LSIFC919
LSIFC919X
LSIFC929
LSIFC929X
LSIFC929XL
config FUSION_MAX_SGE
int "Maximum number of scatter gather entries"
int "Maximum number of scatter gather entries (16 - 128)"
depends on FUSION
default "40"
default "128"
range 16 128
help
This option allows you to specify the maximum number of scatter-
gather entries per I/O. The driver defaults to 40, a reasonable number
for most systems. However, the user may increase this up to 128.
Increasing this parameter will require significantly more memory
on a per controller instance. Increasing the parameter is not
necessary (or recommended) unless the user will be running
large I/O's via the raw interface.
gather entries per I/O. The driver default is 128, which matches
SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
Decreasing this parameter will reduce memory requirements
on a per controller instance.
config FUSION_CTL
tristate "Fusion MPT misc device (ioctl) driver"
depends on FUSION
depends on FUSION_SPI || FUSION_FC
---help---
The Fusion MPT misc device driver provides specialized control
of MPT adapters via system ioctl calls. Use of ioctl calls to
......@@ -48,7 +68,7 @@ config FUSION_CTL
config FUSION_LAN
tristate "Fusion MPT LAN driver"
depends on FUSION && NET_FC
depends on FUSION_FC && NET_FC
---help---
This module supports LAN IP traffic over Fibre Channel port(s)
on Fusion MPT compatible hardware (LSIFC9xx chips).
......
drivers/message/fusion/Makefile
浏览文件 @ 153b1e1f
#
# Makefile for the LSI Logic Fusion MPT (Message Passing Technology) drivers.
#
# Note! If you want to turn on various debug defines for an extended period of
# time but don't want them lingering around in the Makefile when you pass it on
# to someone else, use the MPT_CFLAGS env variable (thanks Steve). -nromer
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-{ LSI_LOGIC
# Architecture-specific...
# # intel
#EXTRA_CFLAGS += -g
# # sparc64
#EXTRA_CFLAGS += -gstabs+
EXTRA_CFLAGS += ${MPT_CFLAGS}
# Fusion MPT drivers; recognized debug defines...
# MPT general:
#EXTRA_CFLAGS += -DMPT_DEBUG_SCSI
#EXTRA_CFLAGS += -DMPT_DEBUG
#EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME
#EXTRA_CFLAGS += -DMPT_DEBUG_SG
#EXTRA_CFLAGS += -DMPT_DEBUG_EVENTS
#EXTRA_CFLAGS += -DMPT_DEBUG_INIT
#EXTRA_CFLAGS += -DMPT_DEBUG_EXIT
#EXTRA_CFLAGS += -DMPT_DEBUG_FAIL
#
# driver/module specifics...
#
# For mptbase:
#CFLAGS_mptbase.o += -DMPT_DEBUG_HANDSHAKE
#CFLAGS_mptbase.o += -DMPT_DEBUG_CONFIG
#CFLAGS_mptbase.o += -DMPT_DEBUG_DL
#CFLAGS_mptbase.o += -DMPT_DEBUG_IRQ
#CFLAGS_mptbase.o += -DMPT_DEBUG_RESET
#
# For mptscsih:
#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCANDV
#CFLAGS_mptscsih.o += -DMPT_DEBUG_RESET
#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEH
#CFLAGS_mptscsih.o += -DMPT_DEBUG_DV
#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEGO
#CFLAGS_mptscsih.o += -DMPT_DEBUG_TM
#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCSI
#CFLAGS_mptscsih.o += -DMPT_DEBUG_REPLY
#
# For mptctl:
#CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL
#
# For mptlan:
#CFLAGS_mptlan.o += -DMPT_LAN_IO_DEBUG
#
# For isense:
# EXP...
##mptscsih-objs := scsihost.o scsiherr.o
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
obj-$(CONFIG_FUSION) += mptbase.o mptscsih.o
obj-$(CONFIG_FUSION_SPI) += mptbase.o mptscsih.o mptspi.o
obj-$(CONFIG_FUSION_FC) += mptbase.o mptscsih.o mptfc.o
obj-$(CONFIG_FUSION_CTL) += mptctl.o
obj-$(CONFIG_FUSION_LAN) += mptlan.o
drivers/message/fusion/lsi/mpi.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2005 LSI Logic Corporation.
*
*
* Name: mpi.h
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
* mpi.h Version: 01.05.xx
* mpi.h Version: 01.05.07
*
* Version History
* ---------------
......@@ -52,6 +52,25 @@
* obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
* 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
* 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value.
* 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT.
* 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST
* and MPI_FUNCTION_DIAG_RELEASE.
* Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define.
* Bumped MPI_HEADER_VERSION_UNIT value.
* 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3.
* Added codes for Inband.
* 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell.
* Added define for offset of High Priority Request Queue.
* Added new function codes and new IOCStatus codes.
* Added a IOCLogInfo type of SAS.
* 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT.
* 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT.
* 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT.
* 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT.
* 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT.
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
* --------------------------------------------------------------------------
*/
......@@ -82,7 +101,7 @@
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
#define MPI_HEADER_VERSION_UNIT (0x00)
#define MPI_HEADER_VERSION_UNIT (0x09)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
......@@ -122,7 +141,11 @@
*
*****************************************************************************/
/* S y s t e m D o o r b e l l */
/*
* Defines for working with the System Doorbell register.
* Values for doorbell function codes are included in the section that defines
* all the function codes (further on in this file).
*/
#define MPI_DOORBELL_OFFSET (0x00000000)
#define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */
#define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE)
......@@ -134,6 +157,13 @@
#define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
#define MPI_DOORBELL_ADD_DWORDS_SHIFT (16)
#define MPI_DOORBELL_DATA_MASK (0x0000FFFF)
#define MPI_DOORBELL_FUNCTION_SPECIFIC_MASK (0x0000FFFF)
/* values for Host Buffer Access Control doorbell function */
#define MPI_DB_HPBAC_VALUE_MASK (0x0000F000)
#define MPI_DB_HPBAC_ENABLE_ACCESS (0x01)
#define MPI_DB_HPBAC_DISABLE_ACCESS (0x02)
#define MPI_DB_HPBAC_FREE_BUFFER (0x03)
#define MPI_WRITE_SEQUENCE_OFFSET (0x00000004)
......@@ -257,16 +287,18 @@
#define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A)
#define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B)
#define MPI_FUNCTION_SATA_PASSTHROUGH (0x1C)
#define MPI_DIAG_BUFFER_POST (0x1D)
#define MPI_DIAG_RELEASE (0x1E)
#define MPI_FUNCTION_SCSI_IO_32 (0x1F)
#define MPI_FUNCTION_DIAG_BUFFER_POST (0x1D)
#define MPI_FUNCTION_DIAG_RELEASE (0x1E)
#define MPI_FUNCTION_LAN_SEND (0x20)
#define MPI_FUNCTION_LAN_RECEIVE (0x21)
#define MPI_FUNCTION_LAN_RESET (0x22)
#define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24)
#define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25)
#define MPI_FUNCTION_INBAND_BUFFER_POST (0x28)
#define MPI_FUNCTION_INBAND_SEND (0x29)
#define MPI_FUNCTION_INBAND_RSP (0x2A)
......@@ -276,6 +308,7 @@
#define MPI_FUNCTION_IO_UNIT_RESET (0x41)
#define MPI_FUNCTION_HANDSHAKE (0x42)
#define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43)
#define MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL (0x44)
/* standard version format */
......@@ -328,8 +361,8 @@ typedef struct _SGE_SIMPLE_UNION
U32 Address32;
U64 Address64;
}u;
} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t,
SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION;
} SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION,
SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t;
/****************************************************************************/
/* Chain element structures */
......@@ -648,27 +681,21 @@ typedef struct _MSG_DEFAULT_REPLY
#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
/****************************************************************************/
/* For use by SCSI Initiator and SCSI Target end-to-end data protection */
/****************************************************************************/
#define MPI_IOCSTATUS_EEDP_CRC_ERROR (0x004D)
#define MPI_IOCSTATUS_EEDP_LBA_TAG_ERROR (0x004E)
#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
/****************************************************************************/
/* SCSI (SPI & FCP) target values */
/* SCSI Target values */
/****************************************************************************/
#define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060)
#define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061)
#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete */
#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete name */
#define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
#define MPI_IOCSTATUS_TARGET_ABORTED (0x0063)
#define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
#define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
#define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B)
#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
/****************************************************************************/
/* Additional FCP target values (obsolete) */
......@@ -707,6 +734,7 @@ typedef struct _MSG_DEFAULT_REPLY
/****************************************************************************/
#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
#define MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
/****************************************************************************/
/* Inband values */
......
drivers/message/fusion/lsi/mpi_fc.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2004 LSI Logic Corporation.
*
*
* Name: mpi_fc.h
* Title: MPI Fibre Channel messages and structures
* Creation Date: June 12, 2000
*
* mpi_fc.h Version: 01.05.xx
* mpi_fc.h Version: 01.05.01
*
* Version History
* ---------------
......@@ -36,6 +36,9 @@
* 09-28-01 01.02.02 Change name of reserved field in
* MSG_LINK_SERVICE_RSP_REPLY.
* 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests.
* 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
......
drivers/message/fusion/lsi/mpi_inb.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2003 LSI Logic Corporation.
* Copyright (c) 2003-2004 LSI Logic Corporation.
*
*
* Name: mpi_inb.h
* Title: MPI Inband structures and definitions
* Creation Date: September 30, 2003
*
* mpi_inb.h Version: 01.03.xx
* mpi_inb.h Version: 01.05.01
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* ??-??-?? 01.03.01 Original release.
* 05-11-04 01.03.01 Original release.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
......
drivers/message/fusion/lsi/mpi_init.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2005 LSI Logic Corporation.
*
*
* Name: mpi_init.h
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
* mpi_init.h Version: 01.05.xx
* mpi_init.h Version: 01.05.04
*
* Version History
* ---------------
......@@ -33,6 +33,21 @@
* for SCSI IO requests.
* 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
* 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request.
* Added new word to MSG_SCSI_IO_REPLY to add TaskTag field
* and a reserved U16.
* Added new MSG_SCSI_IO32_REQUEST structure.
* Added a TaskType of Clear Task Set to SCSI
* Task Management request.
* 12-07-04 01.05.02 Added support for Task Management Query Task.
* 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support
* WWID addressing.
* 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request.
* Removed SCSI IO 32 Request.
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
* --------------------------------------------------------------------------
*/
......@@ -76,20 +91,12 @@ typedef struct _MSG_SCSI_IO_REQUEST
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02)
#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
#define MPI_SCSIIO_MSGFLGS_EEDP_TYPE_MASK (0xE0)
#define MPI_SCSIIO_MSGFLGS_EEDP_NONE (0x00)
#define MPI_SCSIIO_MSGFLGS_EEDP_RDPROTECT_T10 (0x20)
#define MPI_SCSIIO_MSGFLGS_EEDP_VRPROTECT_T10 (0x40)
#define MPI_SCSIIO_MSGFLGS_EEDP_WRPROTECT_T10 (0x60)
#define MPI_SCSIIO_MSGFLGS_EEDP_520_READ_MODE1 (0x20)
#define MPI_SCSIIO_MSGFLGS_EEDP_520_WRITE_MODE1 (0x40)
#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_READ_MODE1 (0x60)
#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_WRITE_MODE1 (0x80)
#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
/* SCSI IO LUN fields */
......@@ -148,6 +155,8 @@ typedef struct _MSG_SCSI_IO_REPLY
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
U16 TaskTag; /* 20h */
U16 Reserved1; /* 22h */
} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY,
SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t;
......@@ -190,32 +199,7 @@ typedef struct _MSG_SCSI_IO_REPLY
#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000)
#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000)
/****************************************************************************/
/* SCSI IO 32 Request message structure */
/****************************************************************************/
typedef struct _MSG_SCSI_IO32_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
U8 CDB[32]; /* 18h */
U32 DataLength; /* 38h */
U32 SenseBufferLowAddr; /* 3Ch */
SGE_IO_UNION SGL; /* 40h */
} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
/* SCSI IO 32 uses the same defines as above for SCSI IO */
#define MPI_SCSI_TASKTAG_UNKNOWN (0xFFFF)
/****************************************************************************/
......@@ -247,6 +231,7 @@ typedef struct _MSG_SCSI_TASK_MGMT
#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04)
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
/* MsgFlags bits */
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
......@@ -260,7 +245,7 @@ typedef struct _MSG_SCSI_TASK_MGMT_REPLY
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Reserved; /* 04h */
U8 ResponseCode; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
......@@ -272,6 +257,15 @@ typedef struct _MSG_SCSI_TASK_MGMT_REPLY
} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY,
SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t;
/* ResponseCode values */
#define MPI_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
#define MPI_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
#define MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
#define MPI_SCSITASKMGMT_RSP_TM_FAILED (0x05)
#define MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
#define MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
#define MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
/****************************************************************************/
/* SCSI Enclosure Processor messages */
......@@ -284,11 +278,16 @@ typedef struct _MSG_SEP_REQUEST
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Reserved1; /* 05h */
U8 Reserved2; /* 06h */
U8 Flags; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 SlotStatus; /* 0Ch */
U32 Reserved2; /* 10h */
U32 Reserved3; /* 14h */
U32 Reserved4; /* 18h */
U16 Slot; /* 1Ch */
U16 EnclosureHandle; /* 1Eh */
} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST,
SEPRequest_t, MPI_POINTER pSEPRequest_t;
......@@ -296,6 +295,10 @@ typedef struct _MSG_SEP_REQUEST
#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00)
#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01)
/* Flags defines */
#define MPI_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
#define MPI_SEP_REQ_FLAGS_BUS_TARGETID_ADDRESS (0x00)
/* SlotStatus bits for MSG_SEP_REQUEST */
#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
......@@ -332,6 +335,9 @@ typedef struct _MSG_SEP_REPLY
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 SlotStatus; /* 14h */
U32 Reserved4; /* 18h */
U16 Slot; /* 1Ch */
U16 EnclosureHandle; /* 1Eh */
} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY,
SEPReply_t, MPI_POINTER pSEPReply_t;
......
drivers/message/fusion/lsi/mpi_ioc.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2005 LSI Logic Corporation.
*
*
* Name: mpi_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
* mpi_ioc.h Version: 01.05.xx
* mpi_ioc.h Version: 01.05.08
*
* Version History
* ---------------
......@@ -57,6 +57,30 @@
* Added AliasIndex to EVENT_DATA_LOGOUT structure.
* 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_.
* 06-26-03 01.02.08 Added new values to the product family defines.
* 04-29-04 01.02.09 Added IOCCapabilities field to MSG_IOC_FACTS_REPLY and
* added related defines.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added four new fields to MSG_IOC_INIT.
* Added three new fields to MSG_IOC_FACTS_REPLY.
* Defined four new bits for the IOCCapabilities field of
* the IOCFacts reply.
* Added two new PortTypes for the PortFacts reply.
* Added six new events along with their EventData
* structures.
* Added a new MsgFlag to the FwDownload request to
* indicate last segment.
* Defined a new image type of boot loader.
* Added FW family codes for SAS product families.
* 10-05-04 01.05.02 Added ReplyFifoHostSignalingAddr field to
* MSG_IOC_FACTS_REPLY.
* 12-07-04 01.05.03 Added more defines for SAS Discovery Error event.
* 12-09-04 01.05.04 Added Unsupported device to SAS Device event.
* 01-15-05 01.05.05 Added event data for SAS SES Event.
* 02-09-05 01.05.06 Added MPI_FW_UPLOAD_ITYPE_FW_BACKUP define.
* 02-22-05 01.05.07 Added Host Page Buffer Persistent flag to IOC Facts
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
* --------------------------------------------------------------------------
*/
......@@ -90,20 +114,37 @@ typedef struct _MSG_IOC_INIT
U32 HostMfaHighAddr; /* 10h */
U32 SenseBufferHighAddr; /* 14h */
U32 ReplyFifoHostSignalingAddr; /* 18h */
SGE_SIMPLE_UNION HostPageBufferSGE; /* 1Ch */
U16 MsgVersion; /* 28h */
U16 HeaderVersion; /* 2Ah */
} MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT,
IOCInit_t, MPI_POINTER pIOCInit_t;
/* WhoInit values */
#define MPI_WHOINIT_NO_ONE (0x00)
#define MPI_WHOINIT_SYSTEM_BIOS (0x01)
#define MPI_WHOINIT_ROM_BIOS (0x02)
#define MPI_WHOINIT_PCI_PEER (0x03)
#define MPI_WHOINIT_HOST_DRIVER (0x04)
#define MPI_WHOINIT_MANUFACTURER (0x05)
#define MPI_WHOINIT_NO_ONE (0x00)
#define MPI_WHOINIT_SYSTEM_BIOS (0x01)
#define MPI_WHOINIT_ROM_BIOS (0x02)
#define MPI_WHOINIT_PCI_PEER (0x03)
#define MPI_WHOINIT_HOST_DRIVER (0x04)
#define MPI_WHOINIT_MANUFACTURER (0x05)
/* Flags values */
#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01)
#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
#define MPI_IOCINIT_FLAGS_HOST_PAGE_BUFFER_PERSISTENT (0x04)
#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01)
/* MsgVersion */
#define MPI_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
#define MPI_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
#define MPI_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
#define MPI_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
/* HeaderVersion */
#define MPI_IOCINIT_HEADERVERSION_UNIT_MASK (0xFF00)
#define MPI_IOCINIT_HEADERVERSION_UNIT_SHIFT (8)
#define MPI_IOCINIT_HEADERVERSION_DEV_MASK (0x00FF)
#define MPI_IOCINIT_HEADERVERSION_DEV_SHIFT (0)
typedef struct _MSG_IOC_INIT_REPLY
{
......@@ -187,32 +228,39 @@ typedef struct _MSG_IOC_FACTS_REPLY
MPI_FW_VERSION FWVersion; /* 38h */
U16 HighPriorityQueueDepth; /* 3Ch */
U16 Reserved2; /* 3Eh */
SGE_SIMPLE_UNION HostPageBufferSGE; /* 40h */
U32 ReplyFifoHostSignalingAddr; /* 4Ch */
} MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY,
IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t;
#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
#define MPI_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
#define MPI_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
#define MPI_IOCFACTS_HEADERVERSION_UNIT_MASK (0xFF00)
#define MPI_IOCFACTS_HEADERVERSION_DEV_MASK (0x00FF)
#define MPI_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
#define MPI_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
#define MPI_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
#define MPI_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008)
#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008)
#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01)
#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01)
#define MPI_IOCFACTS_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
#define MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT (0x04)
#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00)
#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01)
#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00)
#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01)
#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q (0x00000001)
#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL (0x00000002)
#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004)
#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
#define MPI_IOCFACTS_CAPABILITY_EEDP (0x00000040)
#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q (0x00000001)
#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL (0x00000002)
#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004)
#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
......@@ -408,6 +456,8 @@ typedef struct _MSG_EVENT_ACK_REPLY
#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F)
#define MPI_EVENT_SAS_SES (0x00000010)
#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011)
#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012)
#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013)
/* AckRequired field values */
......@@ -467,6 +517,10 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
U8 ASCQ; /* 05h */
U16 DevHandle; /* 06h */
U32 DeviceInfo; /* 08h */
U16 ParentDevHandle; /* 0Ch */
U8 PhyNum; /* 0Eh */
U8 Reserved1; /* 0Fh */
U64 SASAddress; /* 10h */
} EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
MpiEventDataSasDeviceStatusChange_t,
......@@ -477,6 +531,8 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04)
#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06)
#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
/* SCSI Event data for Queue Full event */
......@@ -488,6 +544,35 @@ typedef struct _EVENT_DATA_QUEUE_FULL
} EVENT_DATA_QUEUE_FULL, MPI_POINTER PTR_EVENT_DATA_QUEUE_FULL,
EventDataQueueFull_t, MPI_POINTER pEventDataQueueFull_t;
/* MPI Integrated RAID Event data */
typedef struct _EVENT_DATA_RAID
{
U8 VolumeID; /* 00h */
U8 VolumeBus; /* 01h */
U8 ReasonCode; /* 02h */
U8 PhysDiskNum; /* 03h */
U8 ASC; /* 04h */
U8 ASCQ; /* 05h */
U16 Reserved; /* 06h */
U32 SettingsStatus; /* 08h */
} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID,
MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t;
/* MPI Integrated RAID Event data ReasonCode values */
#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00)
#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01)
#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02)
#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03)
#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04)
#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05)
#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06)
#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07)
#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08)
#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09)
#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A)
#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B)
/* MPI Link Status Change Event data */
typedef struct _EVENT_DATA_LINK_STATUS
......@@ -535,35 +620,63 @@ typedef struct _EVENT_DATA_LOGOUT
#define MPI_EVENT_LOGOUT_ALL_ALIASES (0xFF)
/* SAS SES Event data */
/* MPI Integrated RAID Event data */
typedef struct _EVENT_DATA_RAID
typedef struct _EVENT_DATA_SAS_SES
{
U8 VolumeID; /* 00h */
U8 VolumeBus; /* 01h */
U8 ReasonCode; /* 02h */
U8 PhysDiskNum; /* 03h */
U8 ASC; /* 04h */
U8 ASCQ; /* 05h */
U16 Reserved; /* 06h */
U32 SettingsStatus; /* 08h */
} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID,
MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t;
U8 PhyNum; /* 00h */
U8 Port; /* 01h */
U8 PortWidth; /* 02h */
U8 Reserved1; /* 04h */
} EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES,
MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t;
/* MPI Integrated RAID Event data ReasonCode values */
#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00)
#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01)
#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02)
#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03)
#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04)
#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05)
#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06)
#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07)
#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08)
#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09)
#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A)
#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B)
/* SAS Phy Link Status Event data */
typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
{
U8 PhyNum; /* 00h */
U8 LinkRates; /* 01h */
U16 DevHandle; /* 02h */
U64 SASAddress; /* 04h */
} EVENT_DATA_SAS_PHY_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_SAS_PHY_LINK_STATUS,
MpiEventDataSasPhyLinkStatus_t, MPI_POINTER pMpiEventDataSasPhyLinkStatus_t;
/* defines for the LinkRates field of the SAS PHY Link Status event */
#define MPI_EVENT_SAS_PLS_LR_CURRENT_MASK (0xF0)
#define MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT (4)
#define MPI_EVENT_SAS_PLS_LR_PREVIOUS_MASK (0x0F)
#define MPI_EVENT_SAS_PLS_LR_PREVIOUS_SHIFT (0)
#define MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN (0x00)
#define MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED (0x01)
#define MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION (0x02)
#define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE (0x03)
#define MPI_EVENT_SAS_PLS_LR_RATE_1_5 (0x08)
#define MPI_EVENT_SAS_PLS_LR_RATE_3_0 (0x09)
/* SAS Discovery Errror Event data */
typedef struct _EVENT_DATA_DISCOVERY_ERROR
{
U32 DiscoveryStatus; /* 00h */
U8 Port; /* 04h */
U8 Reserved1; /* 05h */
U16 Reserved2; /* 06h */
} EVENT_DATA_DISCOVERY_ERROR, MPI_POINTER PTR_EVENT_DATA_DISCOVERY_ERROR,
EventDataDiscoveryError_t, MPI_POINTER pEventDataDiscoveryError_t;
#define MPI_EVENT_DSCVRY_ERR_DS_LOOP_DETECTED (0x00000001)
#define MPI_EVENT_DSCVRY_ERR_DS_UNADDRESSABLE_DEVICE (0x00000002)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTIPLE_PORTS (0x00000004)
#define MPI_EVENT_DSCVRY_ERR_DS_EXPANDER_ERR (0x00000008)
#define MPI_EVENT_DSCVRY_ERR_DS_SMP_TIMEOUT (0x00000010)
#define MPI_EVENT_DSCVRY_ERR_DS_OUT_ROUTE_ENTRIES (0x00000020)
#define MPI_EVENT_DSCVRY_ERR_DS_INDEX_NOT_EXIST (0x00000040)
#define MPI_EVENT_DSCVRY_ERR_DS_SMP_FUNCTION_FAILED (0x00000080)
#define MPI_EVENT_DSCVRY_ERR_DS_SMP_CRC_ERROR (0x00000100)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_SUBTRACTIVE (0x00000200)
#define MPI_EVENT_DSCVRY_ERR_DS_TABLE_TO_TABLE (0x00000400)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800)
/*****************************************************************************
......@@ -589,11 +702,13 @@ typedef struct _MSG_FW_DOWNLOAD
} MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD,
FWDownload_t, MPI_POINTER pFWDownload_t;
#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00)
#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01)
#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02)
#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03)
#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04)
#define MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00)
#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01)
#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02)
#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03)
#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04)
typedef struct _FWDownloadTCSGE
......@@ -647,6 +762,7 @@ typedef struct _MSG_FW_UPLOAD
#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03)
#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04)
#define MPI_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
typedef struct _FWUploadTCSGE
{
......@@ -723,6 +839,7 @@ typedef struct _MPI_FW_HEADER
#define MPI_FW_HEADER_PID_PROD_IM_SCSI (0x0400)
#define MPI_FW_HEADER_PID_PROD_IS_SCSI (0x0500)
#define MPI_FW_HEADER_PID_PROD_CTX_SCSI (0x0600)
#define MPI_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
#define MPI_FW_HEADER_PID_FAMILY_MASK (0x00FF)
/* SCSI */
......@@ -740,13 +857,16 @@ typedef struct _MPI_FW_HEADER
#define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI (0x000C)
/* Fibre Channel */
#define MPI_FW_HEADER_PID_FAMILY_909_FC (0x0000)
#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001)
#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002)
#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003)
#define MPI_FW_HEADER_PID_FAMILY_949_FC (0x0004)
#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001) /* 919 and 929 */
#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002) /* 919X and 929X */
#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) /* 919XL and 929XL */
#define MPI_FW_HEADER_PID_FAMILY_939X_FC (0x0004) /* 939X and 949X */
#define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005)
/* SAS */
#define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001)
#define MPI_FW_HEADER_PID_FAMILY_1068_SAS (0x0002)
#define MPI_FW_HEADER_PID_FAMILY_1078_SAS (0x0003)
#define MPI_FW_HEADER_PID_FAMILY_106xE_SAS (0x0004) /* 1068E, 1066E, and 1064E */
typedef struct _MPI_EXT_IMAGE_HEADER
{
......
drivers/message/fusion/lsi/mpi_lan.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2004 LSI Logic Corporation.
*
*
* Name: mpi_lan.h
* Title: MPI LAN messages and structures
* Creation Date: June 30, 2000
*
* mpi_lan.h Version: 01.05.xx
* mpi_lan.h Version: 01.05.01
*
* Version History
* ---------------
......@@ -28,6 +28,8 @@
* 02-20-01 01.01.02 Started using MPI_POINTER.
* 03-27-01 01.01.03 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
......
drivers/message/fusion/lsi/mpi_raid.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2001-2003 LSI Logic Corporation.
* Copyright (c) 2001-2005 LSI Logic Corporation.
*
*
* Name: mpi_raid.h
* Title: MPI RAID message and structures
* Creation Date: February 27, 2001
*
* mpi_raid.h Version: 01.05.xx
* mpi_raid.h Version: 01.05.02
*
* Version History
* ---------------
......@@ -28,6 +28,10 @@
* 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST.
* 04-01-03 01.02.09 New action data option flag for
* MPI_RAID_ACTION_DELETE_VOLUME.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 01-15-05 01.05.02 Added defines for the two new RAID Actions for
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* --------------------------------------------------------------------------
*/
......@@ -84,6 +88,8 @@ typedef struct _MSG_RAID_ACTION
#define MPI_RAID_ACTION_REPLACE_PHYSDISK (0x10)
#define MPI_RAID_ACTION_ACTIVATE_VOLUME (0x11)
#define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12)
#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13)
#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14)
/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
......@@ -99,6 +105,13 @@ typedef struct _MSG_RAID_ACTION
/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_RESYNC_RATE action */
#define MPI_RAID_ACTION_ADATA_RESYNC_RATE_MASK (0x000000FF)
/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_DATA_SCRUB_RATE action */
#define MPI_RAID_ACTION_ADATA_DATA_SCRUB_RATE_MASK (0x000000FF)
/* RAID Action reply message */
......
drivers/message/fusion/lsi/mpi_sas.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2003 LSI Logic Corporation.
* Copyright (c) 2004 LSI Logic Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: April 23, 2003
* Creation Date: August 19, 2004
*
* mpi_sas.h Version: 01.05.xx
* mpi_sas.h Version: 01.05.01
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* xx-yy-zz 01.05.01 Original release.
* 08-19-04 01.05.01 Original release.
* --------------------------------------------------------------------------
*/
#ifndef MPI_SAS_H
#define MPI_SAS_H
/*
* Values for SASStatus.
*/
#define MPI_SASSTATUS_SUCCESS (0x00)
#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
#define MPI_SASSTATUS_INVALID_FRAME (0x02)
#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
/*
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
/*****************************************************************************
*
* S e r i a l A t t a c h e d S C S I M e s s a g e s
......@@ -48,8 +99,10 @@ typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
/* values for ConnectionRate field */
#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
......@@ -77,51 +130,69 @@ typedef struct _MSG_SMP_PASSTHROUGH_REPLY
#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
/* values for the SASStatus field */
#define MPI_SASSTATUS_SUCCESS (0x00)
#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
#define MPI_SASSTATUS_INVALID_FRAME (0x02)
#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
/****************************************************************************/
/* SATA Passthrough Request */
/****************************************************************************/
typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 PassthroughFlags; /* 04h */
U8 ConnectionRate; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U32 Reserved2; /* 10h */
U32 Reserved3; /* 14h */
U32 DataLength; /* 18h */
U8 CommandFIS[20]; /* 1Ch */
SGE_SIMPLE_UNION SGL; /* 30h */
} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200)
#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080)
#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
/* values for ConnectionRate field */
#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09)
/* SATA Passthrough Reply */
typedef struct _MSG_SATA_PASSTHROUGH_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 PassthroughFlags; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2; /* 0Ch */
U8 SASStatus; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U8 StatusFIS[20]; /* 14h */
U32 StatusControlRegisters; /* 28h */
U32 TransferCount; /* 2Ch */
} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
/*
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
/****************************************************************************/
......@@ -148,15 +219,13 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
/* values for the ... field */
/* values for the Operation field */
#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
#define MPI_SAS_OP_CLEAR_ALL (0x02)
#define MPI_SAS_OP_MAP (0x03)
#define MPI_SAS_OP_MOVE (0x04)
#define MPI_SAS_OP_CLEAR (0x05)
#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
#define MPI_SAS_OP_MAP_CURRENT (0x09)
/* SAS IO Unit Control Reply */
......
drivers/message/fusion/lsi/mpi_targ.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2004 LSI Logic Corporation.
*
*
* Name: mpi_targ.h
* Title: MPI Target mode messages and structures
* Creation Date: June 22, 2000
*
* mpi_targ.h Version: 01.05.xx
* mpi_targ.h Version: 01.05.04
*
* Version History
* ---------------
......@@ -43,6 +43,16 @@
* Added PRIORITY_REASON_TARGET_BUSY.
* 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
* 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added new request message structures for
* MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
* MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and
* MSG_TARGET_ASSIST_EXT_REQUEST.
* Added new structures for SAS SSP Command buffer, SSP
* Task buffer, and SSP Status IU.
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
* --------------------------------------------------------------------------
*/
......@@ -133,6 +143,25 @@ typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY
} MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY,
PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t;
typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 PriorityReason; /* 0Ch */
U8 Reserved3; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ReplyWord; /* 14h */
} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t;
#define PRIORITY_REASON_NO_DISCONNECT (0x00)
#define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01)
#define PRIORITY_REASON_CMD_PARITY_ERR (0x02)
......@@ -146,7 +175,34 @@ typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY
#define PRIORITY_REASON_UNKNOWN (0xFF)
typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY
/****************************************************************************/
/* Target Command Buffer Post Base Request */
/****************************************************************************/
typedef struct _MSG_TARGET_CMD_BUF_POST_BASE_REQUEST
{
U8 BufferPostFlags; /* 00h */
U8 PortNumber; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 TotalCmdBuffers; /* 04h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U16 CmdBufferLength; /* 10h */
U16 NextCmdBufferOffset; /* 12h */
U32 BaseAddressLow; /* 14h */
U32 BaseAddressHigh; /* 18h */
} MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
MPI_POINTER PTR__MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
TargetCmdBufferPostBaseRequest_t,
MPI_POINTER pTargetCmdBufferPostBaseRequest_t;
#define CMD_BUFFER_POST_BASE_FLAGS_AUTO_POST_ALL (0x01)
typedef struct _MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
......@@ -155,16 +211,41 @@ typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 PriorityReason; /* 0Ch */
U8 Reserved3; /* 0Dh */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ReplyWord; /* 14h */
} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t;
} MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY,
MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY,
TargetCmdBufferPostBaseListReply_t,
MPI_POINTER pTargetCmdBufferPostBaseListReply_t;
/****************************************************************************/
/* Target Command Buffer Post List Request */
/****************************************************************************/
typedef struct _MSG_TARGET_CMD_BUF_POST_LIST_REQUEST
{
U8 Reserved; /* 00h */
U8 PortNumber; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 CmdBufferCount; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved2; /* 0Ch */
U16 IoIndex[2]; /* 10h */
} MSG_TARGET_CMD_BUF_POST_LIST_REQUEST,
MPI_POINTER PTR_MSG_TARGET_CMD_BUF_POST_LIST_REQUEST,
TargetCmdBufferPostListRequest_t,
MPI_POINTER pTargetCmdBufferPostListRequest_t;
/****************************************************************************/
/* Command Buffer Formats (with 16 byte CDB) */
/****************************************************************************/
typedef struct _MPI_TARGET_FCP_CMD_BUFFER
{
U8 FcpLun[8]; /* 00h */
......@@ -201,6 +282,46 @@ typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER
MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer;
typedef struct _MPI_TARGET_SSP_CMD_BUFFER
{
U8 FrameType; /* 00h */
U8 Reserved1; /* 01h */
U16 Reserved2; /* 02h */
U16 InitiatorTag; /* 04h */
U16 DevHandle; /* 06h */
/* COMMAND information unit starts here */
U8 LogicalUnitNumber[8]; /* 08h */
U8 Reserved3; /* 10h */
U8 TaskAttribute; /* lower 3 bits */ /* 11h */
U8 Reserved4; /* 12h */
U8 AdditionalCDBLength; /* upper 5 bits */ /* 13h */
U8 CDB[16]; /* 14h */
/* Additional CDB bytes extend past the CDB field */
} MPI_TARGET_SSP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_SSP_CMD_BUFFER,
MpiTargetSspCmdBuffer, MPI_POINTER pMpiTargetSspCmdBuffer;
typedef struct _MPI_TARGET_SSP_TASK_BUFFER
{
U8 FrameType; /* 00h */
U8 Reserved1; /* 01h */
U16 Reserved2; /* 02h */
U16 InitiatorTag; /* 04h */
U16 DevHandle; /* 06h */
/* TASK information unit starts here */
U8 LogicalUnitNumber[8]; /* 08h */
U8 Reserved3; /* 10h */
U8 Reserved4; /* 11h */
U8 TaskManagementFunction; /* 12h */
U8 Reserved5; /* 13h */
U16 ManagedTaskTag; /* 14h */
U16 Reserved6; /* 16h */
U32 Reserved7; /* 18h */
U32 Reserved8; /* 1Ch */
U32 Reserved9; /* 20h */
} MPI_TARGET_SSP_TASK_BUFFER, MPI_POINTER PTR_MPI_TARGET_SSP_TASK_BUFFER,
MpiTargetSspTaskBuffer, MPI_POINTER pMpiTargetSspTaskBuffer;
/****************************************************************************/
/* Target Assist Request */
/****************************************************************************/
......@@ -308,6 +429,27 @@ typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU
} MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU,
TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t;
/*
* NOTE: The SSP status IU is big-endian. When used on a little-endian system,
* this structure properly orders the bytes.
*/
typedef struct _MPI_TARGET_SSP_RSP_IU
{
U32 Reserved0[6]; /* reserved for SSP header */ /* 00h */
/* start of RESPONSE information unit */
U32 Reserved1; /* 18h */
U32 Reserved2; /* 1Ch */
U16 Reserved3; /* 20h */
U8 DataPres; /* lower 2 bits */ /* 22h */
U8 Status; /* 23h */
U32 Reserved4; /* 24h */
U32 SenseDataLength; /* 28h */
U32 ResponseDataLength; /* 2Ch */
U8 ResponseSenseData[4]; /* 30h */
} MPI_TARGET_SSP_RSP_IU, MPI_POINTER PTR_MPI_TARGET_SSP_RSP_IU,
MpiTargetSspRspIu_t, MPI_POINTER pMpiTargetSspRspIu_t;
/****************************************************************************/
/* Target Mode Abort Request */
/****************************************************************************/
......
drivers/message/fusion/lsi/mpi_tool.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2001-2003 LSI Logic Corporation.
* Copyright (c) 2001-2005 LSI Logic Corporation.
*
*
* Name: mpi_tool.h
* Title: MPI Toolbox structures and definitions
* Creation Date: July 30, 2001
*
* mpi_tool.h Version: 01.05.xx
* mpi_tool.h Version: 01.05.03
*
* Version History
* ---------------
......@@ -15,6 +15,16 @@
* -------- -------- ------------------------------------------------------
* 08-08-01 01.02.01 Original release.
* 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
* 01-16-04 01.02.03 Added defines and structures for new tools
*. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and
* MPI_TOOLBOX_FC_MANAGEMENT_TOOL.
* 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and
* Diagnostic Release requests and replies.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT.
* 02-09-05 01.05.03 Added frame size option to FC management tool.
* Added Beacon tool to the Toolbox.
* --------------------------------------------------------------------------
*/
......@@ -26,6 +36,7 @@
#define MPI_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
#define MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
#define MPI_TOOLBOX_FC_MANAGEMENT_TOOL (0x04)
#define MPI_TOOLBOX_BEACON_TOOL (0x05)
/****************************************************************************/
......@@ -185,11 +196,21 @@ typedef struct _MPI_TB_FC_MANAGE_PID_AI
} MPI_TB_FC_MANAGE_PID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_PID_AI,
MpiTbFcManagePidAi_t, MPI_POINTER pMpiTbFcManagePidAi_t;
/* ActionInfo for set max frame size */
typedef struct _MPI_TB_FC_MANAGE_FRAME_SIZE_AI
{
U16 FrameSize; /* 00h */
U8 PortNum; /* 02h */
U8 Reserved1; /* 03h */
} MPI_TB_FC_MANAGE_FRAME_SIZE_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_FRAME_SIZE_AI,
MpiTbFcManageFrameSizeAi_t, MPI_POINTER pMpiTbFcManageFrameSizeAi_t;
/* union of ActionInfo */
typedef union _MPI_TB_FC_MANAGE_AI_UNION
{
MPI_TB_FC_MANAGE_BUS_TID_AI BusTid;
MPI_TB_FC_MANAGE_PID_AI Port;
MPI_TB_FC_MANAGE_FRAME_SIZE_AI FrameSize;
} MPI_TB_FC_MANAGE_AI_UNION, MPI_POINTER PTR_MPI_TB_FC_MANAGE_AI_UNION,
MpiTbFcManageAiUnion_t, MPI_POINTER pMpiTbFcManageAiUnion_t;
......@@ -214,6 +235,32 @@ typedef struct _MSG_TOOLBOX_FC_MANAGE_REQUEST
#define MPI_TB_FC_MANAGE_ACTION_DISC_ALL (0x00)
#define MPI_TB_FC_MANAGE_ACTION_DISC_PID (0x01)
#define MPI_TB_FC_MANAGE_ACTION_DISC_BUS_TID (0x02)
#define MPI_TB_FC_MANAGE_ACTION_SET_MAX_FRAME_SIZE (0x03)
/****************************************************************************/
/* Toolbox Beacon Tool request */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_BEACON_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 ConnectNum; /* 0Ch */
U8 PortNum; /* 0Dh */
U8 Reserved3; /* 0Eh */
U8 Flags; /* 0Fh */
} MSG_TOOLBOX_BEACON_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_BEACON_REQUEST,
ToolboxBeaconRequest_t, MPI_POINTER pToolboxBeaconRequest_t;
#define MPI_TOOLBOX_FLAGS_BEACON_MODE_OFF (0x00)
#define MPI_TOOLBOX_FLAGS_BEACON_MODE_ON (0x01)
/****************************************************************************/
......@@ -233,14 +280,16 @@ typedef struct _MSG_DIAG_BUFFER_POST_REQUEST
U32 ExtendedType; /* 0Ch */
U32 BufferLength; /* 10h */
U32 ProductSpecific[4]; /* 14h */
U32 Reserved3; /* 18h */
SGE_SIMPLE_UNION SGL; /* 28h */
U32 Reserved3; /* 24h */
U64 BufferAddress; /* 28h */
} MSG_DIAG_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REQUEST,
DiagBufferPostRequest_t, MPI_POINTER pDiagBufferPostRequest_t;
#define MPI_DIAG_BUF_TYPE_TRACE (0x00)
#define MPI_DIAG_BUF_TYPE_SNAPSHOT (0x01)
#define MPI_DIAG_BUF_TYPE_EXTENDED (0x02)
/* count of the number of buffer types */
#define MPI_DIAG_BUF_TYPE_COUNT (0x03)
#define MPI_DIAG_EXTENDED_QTAG (0x00000001)
......
drivers/message/fusion/lsi/mpi_type.h
浏览文件 @ 153b1e1f
/*
* Copyright (c) 2000-2003 LSI Logic Corporation.
* Copyright (c) 2000-2004 LSI Logic Corporation.
*
*
* Name: mpi_type.h
* Title: MPI Basic type definitions
* Creation Date: June 6, 2000
*
* mpi_type.h Version: 01.05.xx
* mpi_type.h Version: 01.05.01
*
* Version History
* ---------------
......@@ -18,6 +18,8 @@
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
......@@ -50,11 +52,6 @@ typedef unsigned short U16;
typedef int32_t S32;
typedef u_int32_t U32;
/*
* The only way crap below could work on big-endian boxen would be if it
* wasn't used at all.
*/
typedef struct _S64
{
U32 Low;
......
drivers/message/fusion/mptbase.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/message/fusion/mptbase.h
浏览文件 @ 153b1e1f
......@@ -5,15 +5,9 @@
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Credits:
* (see mptbase.c)
*
* Copyright (c) 1999-2004 LSI Logic Corporation
* Originally By: Steven J. Ralston
* (mailto:sjralston1@netscape.net)
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
* $Id: mptbase.h,v 1.144 2003/01/28 21:31:56 pdelaney Exp $
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
......@@ -71,7 +65,6 @@
#include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */
#include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */
#include "lsi/mpi_tool.h" /* Tools support */
#include "lsi/fc_log.h"
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
......@@ -80,11 +73,11 @@
#endif
#ifndef COPYRIGHT
#define COPYRIGHT "Copyright (c) 1999-2004 " MODULEAUTHOR
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
#define MPT_LINUX_VERSION_COMMON "3.01.20"
#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.01.20"
#define MPT_LINUX_VERSION_COMMON "3.03.02"
#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.02"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
......@@ -203,7 +196,9 @@
typedef enum {
MPTBASE_DRIVER, /* MPT base class */
MPTCTL_DRIVER, /* MPT ioctl class */
MPTSCSIH_DRIVER, /* MPT SCSI host (initiator) class */
MPTSPI_DRIVER, /* MPT SPI host class */
MPTFC_DRIVER, /* MPT FC host class */
MPTSAS_DRIVER, /* MPT SAS host class */
MPTLAN_DRIVER, /* MPT LAN class */
MPTSTM_DRIVER, /* MPT SCSI target mode class */
MPTUNKNOWN_DRIVER
......@@ -212,11 +207,6 @@ typedef enum {
struct mpt_pci_driver{
int (*probe) (struct pci_dev *dev, const struct pci_device_id *id);
void (*remove) (struct pci_dev *dev);
void (*shutdown) (struct device * dev);
#ifdef CONFIG_PM
int (*resume) (struct pci_dev *dev);
int (*suspend) (struct pci_dev *dev, pm_message_t state);
#endif
};
/*
......@@ -483,6 +473,7 @@ typedef struct _ScsiCfgData {
u8 forceDv; /* 1 to force DV scheduling */
u8 noQas; /* Disable QAS for this adapter */
u8 Saf_Te; /* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */
u8 mpt_dv; /* command line option: enhanced=1, basic=0 */
u8 rsvd[1];
} ScsiCfgData;
......@@ -571,11 +562,21 @@ typedef struct _MPT_ADAPTER
FCPortPage0_t fc_port_page0[2];
LANPage0_t lan_cnfg_page0;
LANPage1_t lan_cnfg_page1;
/*
* Description: errata_flag_1064
* If a PCIX read occurs within 1 or 2 cycles after the chip receives
* a split completion for a read data, an internal address pointer incorrectly
* increments by 32 bytes
*/
int errata_flag_1064;
u8 FirstWhoInit;
u8 upload_fw; /* If set, do a fw upload */
u8 reload_fw; /* Force a FW Reload on next reset */
u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */
u8 pad1[4];
int DoneCtx;
int TaskCtx;
int InternalCtx;
struct list_head list;
struct net_device *netdev;
} MPT_ADAPTER;
......@@ -773,12 +774,6 @@ typedef struct _mpt_sge {
#define DBG_DUMP_TM_REPLY_FRAME(mfp)
#endif
#ifdef MPT_DEBUG_NEH
#define nehprintk(x) printk x
#else
#define nehprintk(x)
#endif
#if defined(MPT_DEBUG_CONFIG) || defined(MPT_DEBUG)
#define dcprintk(x) printk x
#else
......@@ -898,6 +893,11 @@ typedef struct _MPT_SCSI_HOST {
unsigned long soft_resets; /* fw/external bus resets count */
unsigned long timeouts; /* cmd timeouts */
ushort sel_timeout[MPT_MAX_FC_DEVICES];
char *info_kbuf;
wait_queue_head_t scandv_waitq;
int scandv_wait_done;
long last_queue_full;
u8 mpt_pq_filter;
} MPT_SCSI_HOST;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
......@@ -931,6 +931,12 @@ typedef struct _x_config_parms {
/*
* Public entry points...
*/
extern int mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id);
extern void mpt_detach(struct pci_dev *pdev);
#ifdef CONFIG_PM
extern int mpt_suspend(struct pci_dev *pdev, pm_message_t state);
extern int mpt_resume(struct pci_dev *pdev);
#endif
extern int mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass);
extern void mpt_deregister(int cb_idx);
extern int mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc);
......
drivers/message/fusion/mptctl.c
浏览文件 @ 153b1e1f
/*
* linux/drivers/message/fusion/mptctl.c
* Fusion MPT misc device (ioctl) driver.
* For use with PCI chip/adapter(s):
* LSIFC9xx/LSI409xx Fibre Channel
* mpt Ioctl driver.
* For use with LSI Logic PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Credits:
* This driver would not exist if not for Alan Cox's development
* of the linux i2o driver.
*
* A special thanks to Pamela Delaney (LSI Logic) for tons of work
* and countless enhancements while adding support for the 1030
* chip family. Pam has been instrumental in the development of
* of the 2.xx.xx series fusion drivers, and her contributions are
* far too numerous to hope to list in one place.
*
* A huge debt of gratitude is owed to David S. Miller (DaveM)
* for fixing much of the stupid and broken stuff in the early
* driver while porting to sparc64 platform. THANK YOU!
*
* A big THANKS to Eddie C. Dost for fixing the ioctl path
* and most importantly f/w download on sparc64 platform!
* (plus Eddie's other helpful hints and insights)
*
* Thanks to Arnaldo Carvalho de Melo for finding and patching
* a potential memory leak in mptctl_do_fw_download(),
* and for some kmalloc insight:-)
*
* (see also mptbase.c)
*
* Copyright (c) 1999-2004 LSI Logic Corporation
* Originally By: Steven J. Ralston, Noah Romer
* (mailto:sjralston1@netscape.net)
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
* $Id: mptctl.c,v 1.63 2002/12/03 21:26:33 pdelaney Exp $
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
......@@ -95,8 +67,8 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#define COPYRIGHT "Copyright (c) 1999-2004 LSI Logic Corporation"
#define MODULEAUTHOR "Steven J. Ralston, Noah Romer, Pamela Delaney"
#define COPYRIGHT "Copyright (c) 1999-2005 LSI Logic Corporation"
#define MODULEAUTHOR "LSI Logic Corporation"
#include "mptbase.h"
#include "mptctl.h"
......@@ -127,14 +99,14 @@ struct buflist {
* arg contents specific to function.
*/
static int mptctl_fw_download(unsigned long arg);
static int mptctl_getiocinfo (unsigned long arg, unsigned int cmd);
static int mptctl_gettargetinfo (unsigned long arg);
static int mptctl_readtest (unsigned long arg);
static int mptctl_mpt_command (unsigned long arg);
static int mptctl_eventquery (unsigned long arg);
static int mptctl_eventenable (unsigned long arg);
static int mptctl_eventreport (unsigned long arg);
static int mptctl_replace_fw (unsigned long arg);
static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd);
static int mptctl_gettargetinfo(unsigned long arg);
static int mptctl_readtest(unsigned long arg);
static int mptctl_mpt_command(unsigned long arg);
static int mptctl_eventquery(unsigned long arg);
static int mptctl_eventenable(unsigned long arg);
static int mptctl_eventreport(unsigned long arg);
static int mptctl_replace_fw(unsigned long arg);
static int mptctl_do_reset(unsigned long arg);
static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd);
......@@ -149,11 +121,11 @@ static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg);
/*
* Private function calls.
*/
static int mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr);
static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr);
static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen);
static MptSge_t *kbuf_alloc_2_sgl( int bytes, u32 dir, int sge_offset, int *frags,
static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags,
struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
static void kfree_sgl( MptSge_t *sgl, dma_addr_t sgl_dma,
static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
struct buflist *buflist, MPT_ADAPTER *ioc);
static void mptctl_timeout_expired (MPT_IOCTL *ioctl);
static int mptctl_bus_reset(MPT_IOCTL *ioctl);
......@@ -1119,7 +1091,7 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
int numDevices = 0;
unsigned int max_id;
int ii;
int port;
unsigned int port;
int cim_rev;
u8 revision;
......@@ -1162,9 +1134,7 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
return -ENODEV;
}
/* Verify the data transfer size is correct.
* Ignore the port setting.
*/
/* Verify the data transfer size is correct. */
if (karg->hdr.maxDataSize != data_size) {
printk(KERN_ERR "%s@%d::mptctl_getiocinfo - "
"Structure size mismatch. Command not completed.\n",
......@@ -1181,6 +1151,8 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
else
karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
if (karg->hdr.port > 1)
return -EINVAL;
port = karg->hdr.port;
karg->port = port;
......
drivers/message/fusion/mptctl.h
浏览文件 @ 153b1e1f
......@@ -5,22 +5,9 @@
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Credits:
* This driver would not exist if not for Alan Cox's development
* of the linux i2o driver.
*
* A huge debt of gratitude is owed to David S. Miller (DaveM)
* for fixing much of the stupid and broken stuff in the early
* driver while porting to sparc64 platform. THANK YOU!
*
* (see also mptbase.c)
*
* Copyright (c) 1999-2004 LSI Logic Corporation
* Originally By: Steven J. Ralston
* (mailto:sjralston1@netscape.net)
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
* $Id: mptctl.h,v 1.13 2002/12/03 21:26:33 pdelaney Exp $
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
......
drivers/message/fusion/mptfc.c 0 → 100644
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/message/fusion/mptlan.c
浏览文件 @ 153b1e1f
/*
* linux/drivers/message/fusion/mptlan.c
* IP Over Fibre Channel device driver.
* For use with PCI chip/adapter(s):
* LSIFC9xx/LSI409xx Fibre Channel
* For use with LSI Logic Fibre Channel PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Credits:
* This driver would not exist if not for Alan Cox's development
* of the linux i2o driver.
* Copyright (c) 2000-2005 LSI Logic Corporation
*
* Special thanks goes to the I2O LAN driver people at the
* University of Helsinki, who, unbeknownst to them, provided
* the inspiration and initial structure for this driver.
*
* A huge debt of gratitude is owed to David S. Miller (DaveM)
* for fixing much of the stupid and broken stuff in the early
* driver while porting to sparc64 platform. THANK YOU!
*
* A really huge debt of gratitude is owed to Eddie C. Dost
* for gobs of hard work fixing and optimizing LAN code.
* THANK YOU!
*
* (see also mptbase.c)
*
* Copyright (c) 2000-2004 LSI Logic Corporation
* Originally By: Noah Romer
* (mailto:mpt_linux_developer@lsil.com)
*
* $Id: mptlan.c,v 1.53 2002/10/17 20:15:58 pdelaney Exp $
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
......@@ -221,7 +199,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
// NOTE! (Optimization) First case here is now caught in
// mptbase.c::mpt_interrupt() routine and callcack here
// is now skipped for this case! 20001218 -sralston
// is now skipped for this case!
#if 0
case LAN_REPLY_FORM_MESSAGE_CONTEXT:
// dioprintk((KERN_INFO MYNAM "/lan_reply: "
......@@ -234,7 +212,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
// dioprintk((MYNAM "/lan_reply: "
// "calling mpt_lan_send_reply (turbo)\n"));
// Potential BUG here? -sralston
// Potential BUG here?
// FreeReqFrame = mpt_lan_send_turbo(dev, tmsg);
// If/when mpt_lan_send_turbo would return 1 here,
// calling routine (mptbase.c|mpt_interrupt)
......@@ -310,8 +288,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
case MPI_FUNCTION_EVENT_NOTIFICATION:
case MPI_FUNCTION_EVENT_ACK:
/* UPDATE! 20010120 -sralston
* _EVENT_NOTIFICATION should NOT come down this path any more.
/* _EVENT_NOTIFICATION should NOT come down this path any more.
* Should be routed to mpt_lan_event_process(), but just in case...
*/
FreeReqFrame = 1;
......@@ -561,8 +538,8 @@ mpt_lan_close(struct net_device *dev)
}
}
kfree (priv->RcvCtl);
kfree (priv->mpt_rxfidx);
kfree(priv->RcvCtl);
kfree(priv->mpt_rxfidx);
for (i = 0; i < priv->tx_max_out; i++) {
if (priv->SendCtl[i].skb != NULL) {
......
drivers/message/fusion/mptlan.h
浏览文件 @ 153b1e1f
/*
* linux/drivers/message/fusion/mptlan.h
* IP Over Fibre Channel device driver.
* For use with LSI Logic Fibre Channel PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 2000-2005 LSI Logic Corporation
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
NO WARRANTY
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
solely responsible for determining the appropriateness of using and
distributing the Program and assumes all risks associated with its
exercise of rights under this Agreement, including but not limited to
the risks and costs of program errors, damage to or loss of data,
programs or equipment, and unavailability or interruption of operations.
DISCLAIMER OF LIABILITY
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mptlan.h */
#ifndef LINUX_MPTLAN_H_INCLUDED
......@@ -29,7 +75,7 @@
#include <asm/io.h>
/* Override mptbase.h by pre-defining these! */
#define MODULEAUTHOR "Noah Romer, Eddie C. Dost"
#define MODULEAUTHOR "LSI Logic Corporation"
#include "mptbase.h"
......
drivers/message/fusion/mptscsih.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/message/fusion/mptscsih.h
浏览文件 @ 153b1e1f
/*
* linux/drivers/message/fusion/mptscsih.h
* linux/drivers/message/fusion/mptscsi.h
* High performance SCSI / Fibre Channel SCSI Host device driver.
* For use with PCI chip/adapter(s):
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Credits:
* This driver would not exist if not for Alan Cox's development
* of the linux i2o driver.
*
* A huge debt of gratitude is owed to David S. Miller (DaveM)
* for fixing much of the stupid and broken stuff in the early
* driver while porting to sparc64 platform. THANK YOU!
*
* (see also mptbase.c)
*
* Copyright (c) 1999-2004 LSI Logic Corporation
* Originally By: Steven J. Ralston
* (mailto:netscape.net)
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
* $Id: mptscsih.h,v 1.21 2002/12/03 21:26:35 pdelaney Exp $
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
......@@ -91,4 +78,30 @@
#define MPTSCSIH_MIN_SYNC 0x08
#define MPTSCSIH_SAF_TE 0
#endif
extern void mptscsih_remove(struct pci_dev *);
extern void mptscsih_shutdown(struct device *);
#ifdef CONFIG_PM
extern int mptscsih_suspend(struct pci_dev *pdev, u32 state);
extern int mptscsih_resume(struct pci_dev *pdev);
#endif
extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
extern const char * mptscsih_info(struct Scsi_Host *SChost);
extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
extern int mptscsih_slave_alloc(struct scsi_device *device);
extern void mptscsih_slave_destroy(struct scsi_device *device);
extern int mptscsih_slave_configure(struct scsi_device *device);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt);
extern int mptscsih_bus_reset(struct scsi_cmnd * SCpnt);
extern int mptscsih_host_reset(struct scsi_cmnd *SCpnt);
extern int mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, sector_t capacity, int geom[]);
extern int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern ssize_t mptscsih_store_queue_depth(struct device *dev, const char *buf, size_t count);
extern void mptscsih_timer_expired(unsigned long data);
drivers/message/fusion/mptspi.c 0 → 100644
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/FlashPoint.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/Kconfig
浏览文件 @ 153b1e1f
......@@ -137,6 +137,24 @@ config CHR_DEV_SG
If unsure, say N.
config CHR_DEV_SCH
tristate "SCSI media changer support"
depends on SCSI
---help---
This is a driver for SCSI media changers. Most common devices are
tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
here. Check <file:Documentation/scsi-changer.txt> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi.txt>. The module will be called ch.o.
If unsure, say N.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
......@@ -1192,28 +1210,6 @@ config SCSI_PAS16
To compile this driver as a module, choose M here: the
module will be called pas16.
config SCSI_PCI2000
tristate "PCI2000 support"
depends on PCI && SCSI && BROKEN
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the
module will be called pci2000.
config SCSI_PCI2220I
tristate "PCI2220i support"
depends on PCI && SCSI && BROKEN
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the
module will be called pci2220i.
config SCSI_PSI240I
tristate "PSI240i support"
depends on ISA && SCSI
......
drivers/scsi/Makefile
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/NCR53C9x.c
浏览文件 @ 153b1e1f
......@@ -94,7 +94,7 @@ enum {
};
/* The master ring of all esp hosts we are managing in this driver. */
struct NCR_ESP *espchain;
static struct NCR_ESP *espchain;
int nesps = 0, esps_in_use = 0, esps_running = 0;
irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs);
......
drivers/scsi/aacraid/aachba.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/aacraid.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/commctrl.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/comminit.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/commsup.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/dpcsup.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/linit.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/rkt.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/rx.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/aacraid/sa.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/atp870u.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/ch.c 0 → 100644
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/dpt_i2o.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/dpti.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/ipr.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/ipr.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/megaraid/mega_common.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/megaraid/megaraid_mm.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/megaraid/megaraid_mm.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/pci2000.c 已删除 100644 → 0
浏览文件 @ cdbbde14
此差异已折叠。
drivers/scsi/pci2220i.c 已删除 100644 → 0
浏览文件 @ cdbbde14
此差异已折叠。
drivers/scsi/pci2220i.h 已删除 100644 → 0
浏览文件 @ cdbbde14
此差异已折叠。
drivers/scsi/psi_dale.h 已删除 100644 → 0
浏览文件 @ cdbbde14
此差异已折叠。
drivers/scsi/psi_roy.h 已删除 100644 → 0
浏览文件 @ cdbbde14
此差异已折叠。
drivers/scsi/ql1040_fw.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/ql12160_fw.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/ql1280_fw.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla1280.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_dbg.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_def.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_gbl.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_init.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_iocb.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_isr.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_mbx.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/qla2xxx/qla_os.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/scsi.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/scsi_error.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/scsi_lib.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/scsi_scan.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sd.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/st.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sun3x_esp.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sym53c8xx_2/sym_defs.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sym53c8xx_2/sym_glue.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sym53c8xx_2/sym_glue.h
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sym53c8xx_2/sym_hipd.c
浏览文件 @ 153b1e1f
此差异已折叠。
drivers/scsi/sym53c8xx_2/sym_hipd.h
浏览文件 @ 153b1e1f
此差异已折叠。
include/linux/blkdev.h
浏览文件 @ 153b1e1f
此差异已折叠。
include/linux/chio.h 0 → 100644
浏览文件 @ 153b1e1f
此差异已折叠。
include/linux/major.h
浏览文件 @ 153b1e1f
此差异已折叠。
include/scsi/scsi.h
浏览文件 @ 153b1e1f
此差异已折叠。
include/scsi/scsi_device.h
浏览文件 @ 153b1e1f
此差异已折叠。
include/scsi/scsi_host.h
浏览文件 @ 153b1e1f
此差异已折叠。
include/scsi/scsi_transport.h
浏览文件 @ 153b1e1f
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或