Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ieee802154/fakehard.c

A bug fix went into 'net' for ieee802154/fakehard.c, which is removed
in 'net-next'.

Add build fix into the merge from Stephen Rothwell in openvswitch, the
logging macros take a new initial 'log' argument, a new call was added
in 'net' so when we merge that in here we have to explicitly add the
new 'log' arg to it else the build fails.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/ata/sata_rcar.txt

@@ -3,8 +3,10 @@
 Required properties:
 - compatible		: should contain one of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790" for R-Car H2
-			  - "renesas,sata-r8a7791" for R-Car M2
+			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
+			  - "renesas,sata-r8a7791" for R-Car M2-W
+			  - "renesas,sata-r8a7793" for R-Car M2-N
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
 

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -30,10 +30,6 @@ should only be used when a device has multiple interrupt parents.
   Example:
 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
 
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
 2) Interrupt controller nodes
 -----------------------------
 

Documentation/devicetree/bindings/pci/pci.txt

@@ -7,3 +7,14 @@ And for the interrupt mapping part:
 
 Open Firmware Recommended Practice: Interrupt Mapping
 http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+   If present this property assigns a fixed PCI domain number to a host bridge,
+   otherwise an unstable (across boots) unique number will be assigned.
+   It is required to either not set this property at all or set it for all
+   host bridges in the system, otherwise potentially conflicting domain numbers
+   may be assigned to root buses behind different host bridges.  The domain
+   number for each host bridge in the system must be unique.

Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
+TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
 of subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090's pin configuration nodes act as a container for an abitrary number of
+TZ1090's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:

Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Tegra's pin configuration nodes act as a container for an abitrary number of
+Tegra's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -13,7 +13,7 @@ Optional properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
 Each of these subnodes represents some desired configuration for a group of pins.
 
 Required subnode-properties:

Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt

@@ -32,7 +32,7 @@ Required properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
 of these subnodes represents muxing for a pin, a group, or a list of pins or
 groups.
 

Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt

@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt

@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt

@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt

@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt

@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -34,6 +34,7 @@ chipidea	Chipidea, Inc
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
+cnm	Chips&Media, Inc.
 cortina	Cortina Systems, Inc.
 crystalfontz	Crystalfontz America, Inc.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
@@ -92,6 +93,7 @@ maxim	Maxim Integrated Products
 mediatek	MediaTek Inc.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
+micron	Micron Technology Inc.
 mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
@@ -127,6 +129,7 @@ renesas	Renesas Electronics Corporation
 ricoh	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
+sandisk	Sandisk Corporation
 sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC
@@ -138,7 +141,7 @@ silergy	Silergy Corp.
 sirf	SiRF Technology, Inc.
 sitronix	Sitronix Technology Corporation
 smsc	Standard Microsystems Corporation
-snps 	Synopsys, Inc.
+snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.

Documentation/input/elantech.txt

@@ -38,22 +38,38 @@ Contents
         7.2.1 Status packet
         7.2.2 Head packet
         7.2.3 Motion packet
+ 8. Trackpoint (for Hardware version 3 and 4)
+    8.1 Registers
+    8.2 Native relative mode 6 byte packet format
+        8.2.1 Status Packet
 
 
 
 1. Introduction
    ~~~~~~~~~~~~
 
-Currently the Linux Elantech touchpad driver is aware of two different
-hardware versions unimaginatively called version 1 and version 2. Version 1
-is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to
-be introduced with the EeePC and uses 6 bytes per packet, and provides
-additional features such as position of two fingers, and width of the touch.
+Currently the Linux Elantech touchpad driver is aware of four different
+hardware versions unimaginatively called version 1,version 2, version 3
+and version 4. Version 1 is found in "older" laptops and uses 4 bytes per
+packet. Version 2 seems to be introduced with the EeePC and uses 6 bytes
+per packet, and provides additional features such as position of two fingers,
+and width of the touch.  Hardware version 3 uses 6 bytes per packet (and
+for 2 fingers the concatenation of two 6 bytes packets) and allows tracking
+of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can
+combine a status packet with multiple head or motion packets. Hardware version
+4 allows tracking up to 5 fingers.
+
+Some Hardware version 3 and version 4 also have a trackpoint which uses a
+separate packet format. It is also 6 bytes per packet.
 
 The driver tries to support both hardware versions and should be compatible
 with the Xorg Synaptics touchpad driver and its graphical configuration
 utilities.
 
+Note that a mouse button is also associated with either the touchpad or the
+trackpoint when a trackpoint is available.  Disabling the Touchpad in xorg
+(TouchPadOff=0) will also disable the buttons associated with the touchpad.
+
 Additionally the operation of the touchpad can be altered by adjusting the
 contents of some of its internal registers. These registers are represented
 by the driver as sysfs entries under /sys/bus/serio/drivers/psmouse/serio?
@@ -78,7 +94,7 @@ completeness sake.
 2. Extra knobs
    ~~~~~~~~~~~
 
-Currently the Linux Elantech touchpad driver provides two extra knobs under
+Currently the Linux Elantech touchpad driver provides three extra knobs under
 /sys/bus/serio/drivers/psmouse/serio? for the user.
 
 * debug
@@ -112,6 +128,20 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under
    data consistency checking can be done. For now checking is disabled by
    default. Currently even turning it on will do nothing.
 
+* crc_enabled
+
+   Sets crc_enabled to 0/1. The name "crc_enabled" is the official name of
+   this integrity check, even though it is not an actual cyclic redundancy
+   check.
+
+   Depending on the state of crc_enabled, certain basic data integrity
+   verification is done by the driver on hardware version 3 and 4. The
+   driver will reject any packet that appears corrupted. Using this knob,
+   The state of crc_enabled can be altered with this knob.
+
+   Reading the crc_enabled value will show the active value. Echoing
+   "0" or "1" to this file will set the state to "0" or "1".
+
 /////////////////////////////////////////////////////////////////////////////
 
 3. Differentiating hardware versions
@@ -746,3 +776,42 @@ byte 5:
 
         byte 0 ~ 2 for one finger
         byte 3 ~ 5 for another
+
+
+8. Trackpoint (for Hardware version 3 and 4)
+   =========================================
+8.1 Registers
+    ~~~~~~~~~
+No special registers have been identified.
+
+8.2 Native relative mode 6 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+8.2.1 Status Packet
+      ~~~~~~~~~~~~~
+
+byte 0:
+   bit   7   6   5   4   3   2   1   0
+         0   0  sx  sy   0   M   R   L
+byte 1:
+   bit   7   6   5   4   3   2   1   0
+       ~sx   0   0   0   0   0   0   0
+byte 2:
+   bit   7   6   5   4   3   2   1   0
+       ~sy   0   0   0   0   0   0   0
+byte 3:
+   bit   7   6   5   4   3   2   1   0
+         0   0 ~sy ~sx   0   1   1   0
+byte 4:
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+byte 5:
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+
+         x and y are written in two's complement spread
+             over 9 bits with sx/sy the relative top bit and
+             x7..x0 and y7..y0 the lower bits.
+	 ~sx is the inverse of sx, ~sy is the inverse of sy.
+         The sign of y is opposite to what the input driver
+             expects for a relative movement

MAINTAINERS

@@ -2752,6 +2752,13 @@ W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/ethernet/chelsio/cxgb3/
 
+CXGB3 ISCSI DRIVER (CXGB3I)
+M:      Karen Xie <kxie@chelsio.com>
+L:      linux-scsi@vger.kernel.org
+W:      http://www.chelsio.com
+S:      Supported
+F:      drivers/scsi/cxgbi/cxgb3i
+
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
 M:	Steve Wise <swise@chelsio.com>
 L:	linux-rdma@vger.kernel.org
@@ -2766,6 +2773,13 @@ W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/ethernet/chelsio/cxgb4/
 
+CXGB4 ISCSI DRIVER (CXGB4I)
+M:      Karen Xie <kxie@chelsio.com>
+L:      linux-scsi@vger.kernel.org
+W:      http://www.chelsio.com
+S:      Supported
+F:      drivers/scsi/cxgbi/cxgb4i
+
 CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
 M:	Steve Wise <swise@chelsio.com>
 L:	linux-rdma@vger.kernel.org
@@ -6617,6 +6631,23 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 S:	Maintained
 F:	arch/arm/*omap*/
 F:	drivers/i2c/busses/i2c-omap.c
+F:	drivers/irqchip/irq-omap-intc.c
+F:	drivers/mfd/*omap*.c
+F:	drivers/mfd/menelaus.c
+F:	drivers/mfd/palmas.c
+F:	drivers/mfd/tps65217.c
+F:	drivers/mfd/tps65218.c
+F:	drivers/mfd/tps65910.c
+F:	drivers/mfd/twl-core.[ch]
+F:	drivers/mfd/twl4030*.c
+F:	drivers/mfd/twl6030*.c
+F:	drivers/mfd/twl6040*.c
+F:	drivers/regulator/palmas-regulator*.c
+F:	drivers/regulator/pbias-regulator.c
+F:	drivers/regulator/tps65217-regulator.c
+F:	drivers/regulator/tps65218-regulator.c
+F:	drivers/regulator/tps65910-regulator.c
+F:	drivers/regulator/twl-regulator.c
 F:	include/linux/i2c-omap.h
 
 OMAP DEVICE TREE SUPPORT
@@ -6627,6 +6658,9 @@ L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	arch/arm/boot/dts/*omap*
 F:	arch/arm/boot/dts/*am3*
+F:	arch/arm/boot/dts/*am4*
+F:	arch/arm/boot/dts/*am5*
+F:	arch/arm/boot/dts/*dra7*
 
 OMAP CLOCK FRAMEWORK SUPPORT
 M:	Paul Walmsley <paul@pwsan.com>

Makefile

 VERSION = 3
 PATCHLEVEL = 18
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Diseased Newt
 
 # *DOCUMENTATION*
@@ -297,7 +297,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 HOSTCC       = gcc
 HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
 HOSTCXXFLAGS = -O2
 
 ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
@@ -401,7 +401,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
-		   -Wno-format-security
+		   -Wno-format-security \
+		   -std=gnu89
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=

arch/arm/boot/compressed/head.S

@@ -397,8 +397,7 @@ dtb_check_done:
 		add	sp, sp, r6
 #endif
 
-		tst	r4, #1
-		bleq	cache_clean_flush
+		bl	cache_clean_flush
 
 		adr	r0, BSYM(restart)
 		add	r0, r0, r6
@@ -1047,6 +1046,8 @@ cache_clean_flush:
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r2, #1
 		mov	r3, #0
 		mcr	p15, 0, ip, c7, c6, 0	@ invalidate D cache
@@ -1064,6 +1065,8 @@ __armv4_mpu_cache_flush:
 		mov	pc, lr
 		
 __fa526_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean and invalidate D cache
 		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
@@ -1072,13 +1075,16 @@ __fa526_cache_flush:
 
 __armv6_mmu_cache_flush:
 		mov	r1, #0
-		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
+		tst	r4, #1
+		mcreq	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
-		mcr	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
+		mcreq	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
 		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		tst	r4, #1
+		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
 		tst	r10, #0xf << 16		@ hierarchical cache (ARMv7)
 		mov	r10, #0
@@ -1139,6 +1145,8 @@ iflush:
 		mov	pc, lr
 
 __armv5tej_mmu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
@@ -1146,6 +1154,8 @@ __armv5tej_mmu_cache_flush:
 		mov	pc, lr
 
 __armv4_mmu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
@@ -1179,6 +1189,8 @@ no_cache_id:
 
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr

arch/arm/boot/dts/am335x-evm.dts

@@ -489,7 +489,7 @@
 			reg = <0x00060000 0x00020000>;
 		};
 		partition@4 {
-			label = "NAND.u-boot-spl";
+			label = "NAND.u-boot-spl-os";
 			reg = <0x00080000 0x00040000>;
 		};
 		partition@5 {

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -291,8 +291,8 @@
 		dcdc3: regulator-dcdc3 {
 			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -363,8 +363,8 @@
 		dcdc3: regulator-dcdc3 {
 			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -358,8 +358,8 @@
 		dcdc3: regulator-dcdc3 {
 			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};

arch/arm/boot/dts/sama5d31.dtsi

@@ -12,5 +12,5 @@
 #include "sama5d3_uart.dtsi"
 
 / {
-	compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d33.dtsi

@@ -10,5 +10,5 @@
 #include "sama5d3_gmac.dtsi"
 
 / {
-	compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d34.dtsi

@@ -12,5 +12,5 @@
 #include "sama5d3_mci2.dtsi"
 
 / {
-	compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d35.dtsi

@@ -14,5 +14,5 @@
 #include "sama5d3_tcb1.dtsi"
 
 / {
-	compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d36.dtsi

@@ -16,5 +16,5 @@
 #include "sama5d3_uart.dtsi"
 
 / {
-	compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
 };

arch/arm/boot/dts/sama5d3xcm.dtsi

@@ -8,7 +8,7 @@
  */
 
 / {
-	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";

arch/arm/mach-mvebu/board-v7.c

@@ -188,7 +188,7 @@ static void __init thermal_quirk(void)
 
 static void __init mvebu_dt_init(void)
 {
-	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
 	if (of_machine_is_compatible("marvell,a375-db")) {
 		external_abort_quirk();

arch/arm/mm/Kconfig

@@ -798,6 +798,7 @@ config NEED_KUSER_HELPERS
 
 config KUSER_HELPERS
 	bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+	depends on MMU
 	default y
 	help
 	  Warning: disabling this option may break user programs.

arch/arm/plat-orion/gpio.c

@@ -497,6 +497,34 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 #define orion_gpio_dbg_show NULL
 #endif
 
+static void orion_gpio_unmask_irq(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 reg_val;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	reg_val = irq_reg_readl(gc->reg_base + ct->regs.mask);
+	reg_val |= mask;
+	irq_reg_writel(reg_val, gc->reg_base + ct->regs.mask);
+	irq_gc_unlock(gc);
+}
+
+static void orion_gpio_mask_irq(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+	u32 reg_val;
+
+	irq_gc_lock(gc);
+	reg_val = irq_reg_readl(gc->reg_base + ct->regs.mask);
+	reg_val &= ~mask;
+	irq_reg_writel(reg_val, gc->reg_base + ct->regs.mask);
+	irq_gc_unlock(gc);
+}
+
 void __init orion_gpio_init(struct device_node *np,
 			    int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
@@ -565,8 +593,8 @@ void __init orion_gpio_init(struct device_node *np,
 	ct = gc->chip_types;
 	ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
 	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_mask = orion_gpio_mask_irq;
+	ct->chip.irq_unmask = orion_gpio_unmask_irq;
 	ct->chip.irq_set_type = gpio_irq_set_type;
 	ct->chip.name = ochip->chip.label;
 
@@ -575,8 +603,8 @@ void __init orion_gpio_init(struct device_node *np,
 	ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
 	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	ct->chip.irq_ack = irq_gc_ack_clr_bit;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_mask = orion_gpio_mask_irq;
+	ct->chip.irq_unmask = orion_gpio_unmask_irq;
 	ct->chip.irq_set_type = gpio_irq_set_type;
 	ct->handler = handle_edge_irq;
 	ct->chip.name = ochip->chip.label;

arch/arm64/include/asm/memory.h

@@ -142,7 +142,7 @@ static inline void *phys_to_virt(phys_addr_t x)
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+#define ARCH_PFN_OFFSET		((unsigned long)PHYS_PFN_OFFSET)
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define	virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)

arch/arm64/kernel/efi-entry.S

@@ -54,18 +54,17 @@ ENTRY(efi_stub_entry)
 	b.eq	efi_load_fail
 
 	/*
-	 * efi_entry() will have relocated the kernel image if necessary
-	 * and we return here with device tree address in x0 and the kernel
-	 * entry point stored at *image_addr. Save those values in registers
-	 * which are callee preserved.
+	 * efi_entry() will have copied the kernel image if necessary and we
+	 * return here with device tree address in x0 and the kernel entry
+	 * point stored at *image_addr. Save those values in registers which
+	 * are callee preserved.
 	 */
 	mov	x20, x0		// DTB address
 	ldr	x0, [sp, #16]	// relocated _text address
 	mov	x21, x0
 
 	/*
-	 * Flush dcache covering current runtime addresses
-	 * of kernel text/data. Then flush all of icache.
+	 * Calculate size of the kernel Image (same for original and copy).
 	 */
 	adrp	x1, _text
 	add	x1, x1, #:lo12:_text
@@ -73,9 +72,24 @@ ENTRY(efi_stub_entry)
 	add	x2, x2, #:lo12:_edata
 	sub	x1, x2, x1
 
+	/*
+	 * Flush the copied Image to the PoC, and ensure it is not shadowed by
+	 * stale icache entries from before relocation.
+	 */
 	bl	__flush_dcache_area
 	ic	ialluis
 
+	/*
+	 * Ensure that the rest of this function (in the original Image) is
+	 * visible when the caches are disabled. The I-cache can't have stale
+	 * entries for the VA range of the current image, so no maintenance is
+	 * necessary.
+	 */
+	adr	x0, efi_stub_entry
+	adr	x1, efi_stub_entry_end
+	sub	x1, x1, x0
+	bl	__flush_dcache_area
+
 	/* Turn off Dcache and MMU */
 	mrs	x0, CurrentEL
 	cmp	x0, #CurrentEL_EL2
@@ -105,4 +119,5 @@ efi_load_fail:
 	ldp	x29, x30, [sp], #32
 	ret
 
+efi_stub_entry_end:
 ENDPROC(efi_stub_entry)

arch/arm64/kernel/insn.c

@@ -163,9 +163,10 @@ static int __kprobes aarch64_insn_patch_text_cb(void *arg)
 		 * which ends with "dsb; isb" pair guaranteeing global
 		 * visibility.
 		 */
-		atomic_set(&pp->cpu_count, -1);
+		/* Notify other processors with an additional increment. */
+		atomic_inc(&pp->cpu_count);
 	} else {
-		while (atomic_read(&pp->cpu_count) != -1)
+		while (atomic_read(&pp->cpu_count) <= num_online_cpus())
 			cpu_relax();
 		isb();
 	}

arch/arm64/lib/clear_user.S

@@ -46,7 +46,7 @@ USER(9f, strh	wzr, [x0], #2	)
 	sub	x1, x1, #2
 4:	adds	x1, x1, #1
 	b.mi	5f
-	strb	wzr, [x0]
+USER(9f, strb	wzr, [x0]	)
 5:	mov	x0, #0
 	ret
 ENDPROC(__clear_user)

arch/arm64/mm/mmu.c

@@ -202,7 +202,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
-				  unsigned long end, unsigned long phys,
+				  unsigned long end, phys_addr_t phys,
 				  int map_io)
 {
 	pud_t *pud;

arch/mips/include/asm/jump_label.h

@@ -20,9 +20,15 @@
 #define WORD_INSN ".word"
 #endif
 
+#ifdef CONFIG_CPU_MICROMIPS
+#define NOP_INSN "nop32"
+#else
+#define NOP_INSN "nop"
+#endif
+
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm_volatile_goto("1:\tnop\n\t"
+	asm_volatile_goto("1:\t" NOP_INSN "\n\t"
 		"nop\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"

arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h

@@ -41,10 +41,8 @@
 #define cpu_has_mcheck		0
 #define cpu_has_mdmx		0
 #define cpu_has_mips16		0
-#define cpu_has_mips32r1	0
 #define cpu_has_mips32r2	0
 #define cpu_has_mips3d		0
-#define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 #define cpu_has_mipsmt		0
 #define cpu_has_prefetch	0

arch/mips/include/asm/uaccess.h

@@ -301,7 +301,8 @@ do {									\
 			__get_kernel_common((x), size, __gu_ptr);	\
 		else							\
 			__get_user_common((x), size, __gu_ptr);		\
-	}								\
+	} else								\
+		(x) = 0;						\
 									\
 	__gu_err;							\
 })
@@ -316,6 +317,7 @@ do {									\
 	"	.insn						\n"	\
 	"	.section .fixup,\"ax\"				\n"	\
 	"3:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
 	"	j	2b					\n"	\
 	"	.previous					\n"	\
 	"	.section __ex_table,\"a\"			\n"	\
@@ -630,6 +632,7 @@ do {									\
 	"	.insn						\n"	\
 	"	.section .fixup,\"ax\"				\n"	\
 	"3:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
 	"	j	2b					\n"	\
 	"	.previous					\n"	\
 	"	.section __ex_table,\"a\"			\n"	\
@@ -773,10 +776,11 @@ extern void __put_user_unaligned_unknown(void);
 	"jal\t" #destination "\n\t"
 #endif
 
-#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
-#define DADDI_SCRATCH "$0"
-#else
+#if defined(CONFIG_CPU_DADDI_WORKAROUNDS) || (defined(CONFIG_EVA) &&	\
+					      defined(CONFIG_CPU_HAS_PREFETCH))
 #define DADDI_SCRATCH "$3"
+#else
+#define DADDI_SCRATCH "$0"
 #endif
 
 extern size_t __copy_user(void *__to, const void *__from, size_t __n);

arch/mips/kernel/cpu-probe.c

@@ -757,31 +757,34 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			c->cputype = CPU_LOONGSON2;
 			__cpu_name[cpu] = "ICT Loongson-2";
 			set_elf_platform(cpu, "loongson2e");
+			set_isa(c, MIPS_CPU_ISA_III);
 			break;
 		case PRID_REV_LOONGSON2F:
 			c->cputype = CPU_LOONGSON2;
 			__cpu_name[cpu] = "ICT Loongson-2";
 			set_elf_platform(cpu, "loongson2f");
+			set_isa(c, MIPS_CPU_ISA_III);
 			break;
 		case PRID_REV_LOONGSON3A:
 			c->cputype = CPU_LOONGSON3;
-			c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 			__cpu_name[cpu] = "ICT Loongson-3";
 			set_elf_platform(cpu, "loongson3a");
+			set_isa(c, MIPS_CPU_ISA_M64R1);
 			break;
 		case PRID_REV_LOONGSON3B_R1:
 		case PRID_REV_LOONGSON3B_R2:
 			c->cputype = CPU_LOONGSON3;
 			__cpu_name[cpu] = "ICT Loongson-3";
 			set_elf_platform(cpu, "loongson3b");
+			set_isa(c, MIPS_CPU_ISA_M64R1);
 			break;
 		}
 
-		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS |
 			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
 			     MIPS_CPU_32FPR;
 		c->tlbsize = 64;
+		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		break;
 	case PRID_IMP_LOONGSON_32:  /* Loongson-1 */
 		decode_configs(c);

arch/mips/kernel/jump_label.c

@@ -18,31 +18,53 @@
 
 #ifdef HAVE_JUMP_LABEL
 
-#define J_RANGE_MASK ((1ul << 28) - 1)
+/*
+ * Define parameters for the standard MIPS and the microMIPS jump
+ * instruction encoding respectively:
+ *
+ * - the ISA bit of the target, either 0 or 1 respectively,
+ *
+ * - the amount the jump target address is shifted right to fit in the
+ *   immediate field of the machine instruction, either 2 or 1,
+ *
+ * - the mask determining the size of the jump region relative to the
+ *   delay-slot instruction, either 256MB or 128MB,
+ *
+ * - the jump target alignment, either 4 or 2 bytes.
+ */
+#define J_ISA_BIT	IS_ENABLED(CONFIG_CPU_MICROMIPS)
+#define J_RANGE_SHIFT	(2 - J_ISA_BIT)
+#define J_RANGE_MASK	((1ul << (26 + J_RANGE_SHIFT)) - 1)
+#define J_ALIGN_MASK	((1ul << J_RANGE_SHIFT) - 1)
 
 void arch_jump_label_transform(struct jump_entry *e,
 			       enum jump_label_type type)
 {
+	union mips_instruction *insn_p;
 	union mips_instruction insn;
-	union mips_instruction *insn_p =
-		(union mips_instruction *)(unsigned long)e->code;
 
-	/* Jump only works within a 256MB aligned region. */
-	BUG_ON((e->target & ~J_RANGE_MASK) != (e->code & ~J_RANGE_MASK));
+	insn_p = (union mips_instruction *)msk_isa16_mode(e->code);
+
+	/* Jump only works within an aligned region its delay slot is in. */
+	BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK));
 
-	/* Target must have 4 byte alignment. */
-	BUG_ON((e->target & 3) != 0);
+	/* Target must have the right alignment and ISA must be preserved. */
+	BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT);
 
 	if (type == JUMP_LABEL_ENABLE) {
-		insn.j_format.opcode = j_op;
-		insn.j_format.target = (e->target & J_RANGE_MASK) >> 2;
+		insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
+		insn.j_format.target = e->target >> J_RANGE_SHIFT;
 	} else {
 		insn.word = 0; /* nop */
 	}
 
 	get_online_cpus();
 	mutex_lock(&text_mutex);
-	*insn_p = insn;
+	if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) {
+		insn_p->halfword[0] = insn.word >> 16;
+		insn_p->halfword[1] = insn.word;
+	} else
+		*insn_p = insn;
 
 	flush_icache_range((unsigned long)insn_p,
 			   (unsigned long)insn_p + sizeof(*insn_p));

arch/mips/lib/memcpy.S

@@ -503,6 +503,7 @@
 	STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
 .Ldone\@:
 	jr	ra
+	 nop
 	.if __memcpy == 1
 	END(memcpy)
 	.set __memcpy, 0

arch/mips/loongson/loongson-3/numa.c

@@ -33,6 +33,7 @@
 
 static struct node_data prealloc__node_data[MAX_NUMNODES];
 unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+EXPORT_SYMBOL(__node_distances);
 struct node_data *__node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(__node_data);
 

arch/mips/mm/tlb-r4k.c

@@ -299,6 +299,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 
 	local_irq_save(flags);
 
+	htw_stop();
 	pid = read_c0_entryhi() & ASID_MASK;
 	address &= (PAGE_MASK << 1);
 	write_c0_entryhi(address | pid);
@@ -346,6 +347,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 			tlb_write_indexed();
 	}
 	tlbw_use_hazard();
+	htw_start();
 	flush_itlb_vm(vma);
 	local_irq_restore(flags);
 }
@@ -422,6 +424,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 
 	local_irq_save(flags);
 	/* Save old context and create impossible VPN2 value */
+	htw_stop();
 	old_ctx = read_c0_entryhi();
 	old_pagemask = read_c0_pagemask();
 	wired = read_c0_wired();
@@ -443,6 +446,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 
 	write_c0_entryhi(old_ctx);
 	write_c0_pagemask(old_pagemask);
+	htw_start();
 out:
 	local_irq_restore(flags);
 	return ret;

arch/mips/oprofile/backtrace.c

@@ -92,7 +92,7 @@ static inline int unwind_user_frame(struct stackframe *old_frame,
 				/* This marks the end of the previous function,
 				   which means we overran. */
 				break;
-			stack_size = (unsigned) stack_adjustment;
+			stack_size = (unsigned long) stack_adjustment;
 		} else if (is_ra_save_ins(&ip)) {
 			int ra_slot = ip.i_format.simmediate;
 			if (ra_slot < 0)

arch/mips/sgi-ip27/ip27-memory.c

@@ -107,6 +107,7 @@ static void router_recurse(klrou_t *router_a, klrou_t *router_b, int depth)
 }
 
 unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+EXPORT_SYMBOL(__node_distances);
 
 static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b)
 {

arch/parisc/include/asm/uaccess.h

@@ -9,6 +9,8 @@
 #include <asm/errno.h>
 #include <asm-generic/uaccess-unaligned.h>
 
+#include <linux/bug.h>
+
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
 
@@ -28,11 +30,6 @@
  * that put_user is the same as __put_user, etc.
  */
 
-extern int __get_kernel_bad(void);
-extern int __get_user_bad(void);
-extern int __put_kernel_bad(void);
-extern int __put_user_bad(void);
-
 static inline long access_ok(int type, const void __user * addr,
 		unsigned long size)
 {
@@ -43,8 +40,8 @@ static inline long access_ok(int type, const void __user * addr,
 #define get_user __get_user
 
 #if !defined(CONFIG_64BIT)
-#define LDD_KERNEL(ptr)		__get_kernel_bad();
-#define LDD_USER(ptr)		__get_user_bad();
+#define LDD_KERNEL(ptr)		BUILD_BUG()
+#define LDD_USER(ptr)		BUILD_BUG()
 #define STD_KERNEL(x, ptr)	__put_kernel_asm64(x,ptr)
 #define STD_USER(x, ptr)	__put_user_asm64(x,ptr)
 #define ASM_WORD_INSN		".word\t"
@@ -94,7 +91,7 @@ struct exception_data {
 	    case 2: __get_kernel_asm("ldh",ptr); break; \
 	    case 4: __get_kernel_asm("ldw",ptr); break; \
 	    case 8: LDD_KERNEL(ptr); break;		\
-	    default: __get_kernel_bad(); break;         \
+	    default: BUILD_BUG(); break;		\
 	    }                                           \
 	}                                               \
 	else {                                          \
@@ -103,7 +100,7 @@ struct exception_data {
 	    case 2: __get_user_asm("ldh",ptr); break;   \
 	    case 4: __get_user_asm("ldw",ptr); break;   \
 	    case 8: LDD_USER(ptr);  break;		\
-	    default: __get_user_bad(); break;           \
+	    default: BUILD_BUG(); break;		\
 	    }                                           \
 	}                                               \
 							\
@@ -136,7 +133,7 @@ struct exception_data {
 	    case 2: __put_kernel_asm("sth",__x,ptr); break;     \
 	    case 4: __put_kernel_asm("stw",__x,ptr); break;     \
 	    case 8: STD_KERNEL(__x,ptr); break;			\
-	    default: __put_kernel_bad(); break;			\
+	    default: BUILD_BUG(); break;			\
 	    }                                                   \
 	}                                                       \
 	else {                                                  \
@@ -145,7 +142,7 @@ struct exception_data {
 	    case 2: __put_user_asm("sth",__x,ptr); break;       \
 	    case 4: __put_user_asm("stw",__x,ptr); break;       \
 	    case 8: STD_USER(__x,ptr); break;			\
-	    default: __put_user_bad(); break;			\
+	    default: BUILD_BUG(); break;			\
 	    }                                                   \
 	}                                                       \
 								\

arch/parisc/include/uapi/asm/bitsperlong.h

 #ifndef __ASM_PARISC_BITSPERLONG_H
 #define __ASM_PARISC_BITSPERLONG_H
 
-/*
- * using CONFIG_* outside of __KERNEL__ is wrong,
- * __LP64__ was also removed from headers, so what
- * is the right approach on parisc?
- *	-arnd
- */
-#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__)
+#if defined(__LP64__)
 #define __BITS_PER_LONG 64
 #define SHIFT_PER_LONG 6
 #else

arch/parisc/include/uapi/asm/msgbuf.h

 #ifndef _PARISC_MSGBUF_H
 #define _PARISC_MSGBUF_H
 
+#include <asm/bitsperlong.h>
+
 /* 
  * The msqid64_ds structure for parisc architecture, copied from sparc.
  * Note extra padding because this structure is passed back and forth
@@ -13,15 +15,15 @@
 
 struct msqid64_ds {
 	struct ipc64_perm msg_perm;
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int   __pad1;
 #endif
 	__kernel_time_t msg_stime;	/* last msgsnd time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int   __pad2;
 #endif
 	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int   __pad3;
 #endif
 	__kernel_time_t msg_ctime;	/* last change time */

arch/parisc/include/uapi/asm/sembuf.h

 #ifndef _PARISC_SEMBUF_H
 #define _PARISC_SEMBUF_H
 
+#include <asm/bitsperlong.h>
+
 /* 
  * The semid64_ds structure for parisc architecture.
  * Note extra padding because this structure is passed back and forth
@@ -13,11 +15,11 @@
 
 struct semid64_ds {
 	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int	__pad1;
 #endif
 	__kernel_time_t	sem_otime;		/* last semop time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int	__pad2;
 #endif
 	__kernel_time_t	sem_ctime;		/* last change time */

arch/parisc/include/uapi/asm/shmbuf.h

 #ifndef _PARISC_SHMBUF_H
 #define _PARISC_SHMBUF_H
 
+#include <asm/bitsperlong.h>
+
 /* 
  * The shmid64_ds structure for parisc architecture.
  * Note extra padding because this structure is passed back and forth
@@ -13,19 +15,19 @@
 
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int		__pad1;
 #endif
 	__kernel_time_t		shm_atime;	/* last attach time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int		__pad2;
 #endif
 	__kernel_time_t		shm_dtime;	/* last detach time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int		__pad3;
 #endif
 	__kernel_time_t		shm_ctime;	/* last change time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
 	unsigned int		__pad4;
 #endif
 	size_t			shm_segsz;	/* size of segment (bytes) */
@@ -36,23 +38,16 @@ struct shmid64_ds {
 	unsigned int		__unused2;
 };
 
-#ifdef CONFIG_64BIT
-/* The 'unsigned int' (formerly 'unsigned long') data types below will
- * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on
- * a wide kernel, but if some of these values are meant to contain pointers
- * they may need to be 'long long' instead. -PB XXX FIXME
- */
-#endif
 struct shminfo64 {
-	unsigned int	shmmax;
-	unsigned int	shmmin;
-	unsigned int	shmmni;
-	unsigned int	shmseg;
-	unsigned int	shmall;
-	unsigned int	__unused1;
-	unsigned int	__unused2;
-	unsigned int	__unused3;
-	unsigned int	__unused4;
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
 };
 
 #endif /* _PARISC_SHMBUF_H */

arch/parisc/include/uapi/asm/signal.h

@@ -85,7 +85,7 @@
 struct siginfo;
 
 /* Type of a signal handler.  */
-#ifdef CONFIG_64BIT
+#if defined(__LP64__)
 /* function pointers on 64-bit parisc are pointers to little structs and the
  * compiler doesn't support code which changes or tests the address of
  * the function in the little struct.  This is really ugly -PB

arch/parisc/include/uapi/asm/unistd.h

@@ -833,8 +833,9 @@
 #define __NR_seccomp		(__NR_Linux + 338)
 #define __NR_getrandom		(__NR_Linux + 339)
 #define __NR_memfd_create	(__NR_Linux + 340)
+#define __NR_bpf		(__NR_Linux + 341)
 
-#define __NR_Linux_syscalls	(__NR_memfd_create + 1)
+#define __NR_Linux_syscalls	(__NR_bpf + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/syscall_table.S

@@ -286,11 +286,11 @@
 	ENTRY_COMP(msgsnd)
 	ENTRY_COMP(msgrcv)
 	ENTRY_SAME(msgget)		/* 190 */
-	ENTRY_SAME(msgctl)
-	ENTRY_SAME(shmat)
+	ENTRY_COMP(msgctl)
+	ENTRY_COMP(shmat)
 	ENTRY_SAME(shmdt)
 	ENTRY_SAME(shmget)
-	ENTRY_SAME(shmctl)		/* 195 */
+	ENTRY_COMP(shmctl)		/* 195 */
 	ENTRY_SAME(ni_syscall)		/* streams1 */
 	ENTRY_SAME(ni_syscall)		/* streams2 */
 	ENTRY_SAME(lstat64)
@@ -323,7 +323,7 @@
 	ENTRY_SAME(epoll_ctl)		/* 225 */
 	ENTRY_SAME(epoll_wait)
  	ENTRY_SAME(remap_file_pages)
-	ENTRY_SAME(semtimedop)
+	ENTRY_COMP(semtimedop)
 	ENTRY_COMP(mq_open)
 	ENTRY_SAME(mq_unlink)		/* 230 */
 	ENTRY_COMP(mq_timedsend)
@@ -436,6 +436,7 @@
 	ENTRY_SAME(seccomp)
 	ENTRY_SAME(getrandom)
 	ENTRY_SAME(memfd_create)	/* 340 */
+	ENTRY_SAME(bpf)
 
 	/* Nothing yet */
 

arch/powerpc/sysdev/fsl_msi.c

@@ -361,7 +361,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 	cascade_data->virq = virt_msir;
 	msi->cascade_array[irq_index] = cascade_data;
 
-	ret = request_irq(virt_msir, fsl_msi_cascade, 0,
+	ret = request_irq(virt_msir, fsl_msi_cascade, IRQF_NO_THREAD,
 			  "fsl-msi-cascade", cascade_data);
 	if (ret) {
 		dev_err(&dev->dev, "failed to request_irq(%d), ret = %d\n",

arch/sparc/include/asm/atomic_32.h

@@ -22,7 +22,7 @@
 
 int atomic_add_return(int, atomic_t *);
 int atomic_cmpxchg(atomic_t *, int, int);
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+int atomic_xchg(atomic_t *, int);
 int __atomic_add_unless(atomic_t *, int, int);
 void atomic_set(atomic_t *, int);
 

arch/sparc/include/asm/cmpxchg_32.h

@@ -11,22 +11,14 @@
 #ifndef __ARCH_SPARC_CMPXCHG__
 #define __ARCH_SPARC_CMPXCHG__
 
-static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
-{
-	__asm__ __volatile__("swap [%2], %0"
-			     : "=&r" (val)
-			     : "0" (val), "r" (m)
-			     : "memory");
-	return val;
-}
-
+unsigned long __xchg_u32(volatile u32 *m, u32 new);
 void __xchg_called_with_bad_pointer(void);
 
 static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
 {
 	switch (size) {
 	case 4:
-		return xchg_u32(ptr, x);
+		return __xchg_u32(ptr, x);
 	}
 	__xchg_called_with_bad_pointer();
 	return x;

arch/sparc/include/uapi/asm/swab.h

@@ -9,9 +9,9 @@ static inline __u16 __arch_swab16p(const __u16 *addr)
 {
 	__u16 ret;
 
-	__asm__ __volatile__ ("lduha [%1] %2, %0"
+	__asm__ __volatile__ ("lduha [%2] %3, %0"
 			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
+			      : "m" (*addr), "r" (addr), "i" (ASI_PL));
 	return ret;
 }
 #define __arch_swab16p __arch_swab16p
@@ -20,9 +20,9 @@ static inline __u32 __arch_swab32p(const __u32 *addr)
 {
 	__u32 ret;
 
-	__asm__ __volatile__ ("lduwa [%1] %2, %0"
+	__asm__ __volatile__ ("lduwa [%2] %3, %0"
 			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
+			      : "m" (*addr), "r" (addr), "i" (ASI_PL));
 	return ret;
 }
 #define __arch_swab32p __arch_swab32p
@@ -31,9 +31,9 @@ static inline __u64 __arch_swab64p(const __u64 *addr)
 {
 	__u64 ret;
 
-	__asm__ __volatile__ ("ldxa [%1] %2, %0"
+	__asm__ __volatile__ ("ldxa [%2] %3, %0"
 			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
+			      : "m" (*addr), "r" (addr), "i" (ASI_PL));
 	return ret;
 }
 #define __arch_swab64p __arch_swab64p

arch/sparc/kernel/pci_schizo.c

@@ -581,7 +581,7 @@ static irqreturn_t schizo_pcierr_intr_other(struct pci_pbm_info *pbm)
 {
 	unsigned long csr_reg, csr, csr_error_bits;
 	irqreturn_t ret = IRQ_NONE;
-	u16 stat;
+	u32 stat;
 
 	csr_reg = pbm->pbm_regs + SCHIZO_PCI_CTRL;
 	csr = upa_readq(csr_reg);
@@ -617,7 +617,7 @@ static irqreturn_t schizo_pcierr_intr_other(struct pci_pbm_info *pbm)
 			       pbm->name);
 		ret = IRQ_HANDLED;
 	}
-	pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+	pbm->pci_ops->read(pbm->pci_bus, 0, PCI_STATUS, 2, &stat);
 	if (stat & (PCI_STATUS_PARITY |
 		    PCI_STATUS_SIG_TARGET_ABORT |
 		    PCI_STATUS_REC_TARGET_ABORT |
@@ -625,7 +625,7 @@ static irqreturn_t schizo_pcierr_intr_other(struct pci_pbm_info *pbm)
 		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
 		printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
 		       pbm->name, stat);
-		pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+		pbm->pci_ops->write(pbm->pci_bus, 0, PCI_STATUS, 2, 0xffff);
 		ret = IRQ_HANDLED;
 	}
 	return ret;

arch/sparc/kernel/smp_64.c

@@ -816,13 +816,17 @@ void arch_send_call_function_single_ipi(int cpu)
 void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
+	irq_enter();
 	generic_smp_call_function_interrupt();
+	irq_exit();
 }
 
 void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
+	irq_enter();
 	generic_smp_call_function_single_interrupt();
+	irq_exit();
 }
 
 static void tsb_sync(void *info)

arch/sparc/lib/atomic32.c

@@ -45,6 +45,19 @@ ATOMIC_OP(add, +=)
 
 #undef ATOMIC_OP
 
+int atomic_xchg(atomic_t *v, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(ATOMIC_HASH(v), flags);
+	ret = v->counter;
+	v->counter = new;
+	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
+	return ret;
+}
+EXPORT_SYMBOL(atomic_xchg);
+
 int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	int ret;
@@ -137,3 +150,17 @@ unsigned long __cmpxchg_u32(volatile u32 *ptr, u32 old, u32 new)
 	return (unsigned long)prev;
 }
 EXPORT_SYMBOL(__cmpxchg_u32);
+
+unsigned long __xchg_u32(volatile u32 *ptr, u32 new)
+{
+	unsigned long flags;
+	u32 prev;
+
+	spin_lock_irqsave(ATOMIC_HASH(ptr), flags);
+	prev = *ptr;
+	*ptr = new;
+	spin_unlock_irqrestore(ATOMIC_HASH(ptr), flags);
+
+	return (unsigned long)prev;
+}
+EXPORT_SYMBOL(__xchg_u32);

arch/x86/Kconfig

@@ -144,7 +144,7 @@ config INSTRUCTION_DECODER
 
 config PERF_EVENTS_INTEL_UNCORE
 	def_bool y
-	depends on PERF_EVENTS && SUP_SUP_INTEL && PCI
+	depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
 
 config OUTPUT_FORMAT
 	string

arch/x86/boot/compressed/Makefile

@@ -76,8 +76,10 @@ suffix-$(CONFIG_KERNEL_XZ)	:= xz
 suffix-$(CONFIG_KERNEL_LZO) 	:= lzo
 suffix-$(CONFIG_KERNEL_LZ4) 	:= lz4
 
+RUN_SIZE = $(shell objdump -h vmlinux | \
+	     perl $(srctree)/arch/x86/tools/calc_run_size.pl)
 quiet_cmd_mkpiggy = MKPIGGY $@
-      cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
+      cmd_mkpiggy = $(obj)/mkpiggy $< $(RUN_SIZE) > $@ || ( rm -f $@ ; false )
 
 targets += piggy.S
 $(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE

arch/x86/boot/compressed/head_32.S

@@ -207,7 +207,8 @@ relocated:
  * Do the decompression, and jump to the new kernel..
  */
 				/* push arguments for decompress_kernel: */
-	pushl	$z_output_len	/* decompressed length */
+	pushl	$z_run_size	/* size of kernel with .bss and .brk */
+	pushl	$z_output_len	/* decompressed length, end of relocs */
 	leal	z_extract_offset_negative(%ebx), %ebp
 	pushl	%ebp		/* output address */
 	pushl	$z_input_len	/* input_len */
@@ -217,7 +218,7 @@ relocated:
 	pushl	%eax		/* heap area */
 	pushl	%esi		/* real mode pointer */
 	call	decompress_kernel /* returns kernel location in %eax */
-	addl	$24, %esp
+	addl	$28, %esp
 
 /*
  * Jump to the decompressed kernel.

arch/x86/boot/compressed/head_64.S

@@ -402,13 +402,16 @@ relocated:
  * Do the decompression, and jump to the new kernel..
  */
 	pushq	%rsi			/* Save the real mode argument */
+	movq	$z_run_size, %r9	/* size of kernel with .bss and .brk */
+	pushq	%r9
 	movq	%rsi, %rdi		/* real mode address */
 	leaq	boot_heap(%rip), %rsi	/* malloc area for uncompression */
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
-	movq	$z_output_len, %r9	/* decompressed length */
+	movq	$z_output_len, %r9	/* decompressed length, end of relocs */
 	call	decompress_kernel	/* returns kernel location in %rax */
+	popq	%r9
 	popq	%rsi
 
 /*

arch/x86/boot/compressed/misc.c

@@ -358,7 +358,8 @@ asmlinkage __visible void *decompress_kernel(void *rmode, memptr heap,
 				  unsigned char *input_data,
 				  unsigned long input_len,
 				  unsigned char *output,
-				  unsigned long output_len)
+				  unsigned long output_len,
+				  unsigned long run_size)
 {
 	real_mode = rmode;
 
@@ -381,8 +382,14 @@ asmlinkage __visible void *decompress_kernel(void *rmode, memptr heap,
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 
-	output = choose_kernel_location(input_data, input_len,
-					output, output_len);
+	/*
+	 * The memory hole needed for the kernel is the larger of either
+	 * the entire decompressed kernel plus relocation table, or the
+	 * entire decompressed kernel plus .bss and .brk sections.
+	 */
+	output = choose_kernel_location(input_data, input_len, output,
+					output_len > run_size ? output_len
+							      : run_size);
 
 	/* Validate memory location choices. */
 	if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))

arch/x86/boot/compressed/mkpiggy.c

@@ -36,11 +36,13 @@ int main(int argc, char *argv[])
 	uint32_t olen;
 	long ilen;
 	unsigned long offs;
+	unsigned long run_size;
 	FILE *f = NULL;
 	int retval = 1;
 
-	if (argc < 2) {
-		fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+	if (argc < 3) {
+		fprintf(stderr, "Usage: %s compressed_file run_size\n",
+				argv[0]);
 		goto bail;
 	}
 
@@ -74,6 +76,7 @@ int main(int argc, char *argv[])
 	offs += olen >> 12;	/* Add 8 bytes for each 32K block */
 	offs += 64*1024 + 128;	/* Add 64K + 128 bytes slack */
 	offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+	run_size = atoi(argv[2]);
 
 	printf(".section \".rodata..compressed\",\"a\",@progbits\n");
 	printf(".globl z_input_len\n");
@@ -85,6 +88,8 @@ int main(int argc, char *argv[])
 	/* z_extract_offset_negative allows simplification of head_32.S */
 	printf(".globl z_extract_offset_negative\n");
 	printf("z_extract_offset_negative = -0x%lx\n", offs);
+	printf(".globl z_run_size\n");
+	printf("z_run_size = %lu\n", run_size);
 
 	printf(".globl input_data, input_data_end\n");
 	printf("input_data:\n");

arch/x86/include/asm/smp.h

@@ -150,6 +150,7 @@ static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 }
 
 void cpu_disable_common(void);
+void cpu_die_common(unsigned int cpu);
 void native_smp_prepare_boot_cpu(void);
 void native_smp_prepare_cpus(unsigned int max_cpus);
 void native_smp_cpus_done(unsigned int max_cpus);

arch/x86/kernel/cpu/common.c

@@ -146,6 +146,8 @@ EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
 static int __init x86_xsave_setup(char *s)
 {
+	if (strlen(s))
+		return 0;
 	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVES);

arch/x86/kernel/cpu/microcode/amd_early.c

@@ -108,12 +108,13 @@ static size_t compute_container_size(u8 *data, u32 total_size)
  * load_microcode_amd() to save equivalent cpu table and microcode patches in
  * kernel heap memory.
  */
-static void apply_ucode_in_initrd(void *ucode, size_t size)
+static void apply_ucode_in_initrd(void *ucode, size_t size, bool save_patch)
 {
 	struct equiv_cpu_entry *eq;
 	size_t *cont_sz;
 	u32 *header;
 	u8  *data, **cont;
+	u8 (*patch)[PATCH_MAX_SIZE];
 	u16 eq_id = 0;
 	int offset, left;
 	u32 rev, eax, ebx, ecx, edx;
@@ -123,10 +124,12 @@ static void apply_ucode_in_initrd(void *ucode, size_t size)
 	new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
 	cont_sz = (size_t *)__pa_nodebug(&container_size);
 	cont	= (u8 **)__pa_nodebug(&container);
+	patch	= (u8 (*)[PATCH_MAX_SIZE])__pa_nodebug(&amd_ucode_patch);
 #else
 	new_rev = &ucode_new_rev;
 	cont_sz = &container_size;
 	cont	= &container;
+	patch	= &amd_ucode_patch;
 #endif
 
 	data   = ucode;
@@ -213,9 +216,9 @@ static void apply_ucode_in_initrd(void *ucode, size_t size)
 				rev = mc->hdr.patch_id;
 				*new_rev = rev;
 
-				/* save ucode patch */
-				memcpy(amd_ucode_patch, mc,
-				       min_t(u32, header[1], PATCH_MAX_SIZE));
+				if (save_patch)
+					memcpy(patch, mc,
+					       min_t(u32, header[1], PATCH_MAX_SIZE));
 			}
 		}
 
@@ -246,7 +249,7 @@ void __init load_ucode_amd_bsp(void)
 	*data = cp.data;
 	*size = cp.size;
 
-	apply_ucode_in_initrd(cp.data, cp.size);
+	apply_ucode_in_initrd(cp.data, cp.size, true);
 }
 
 #ifdef CONFIG_X86_32
@@ -263,7 +266,7 @@ void load_ucode_amd_ap(void)
 	size_t *usize;
 	void **ucode;
 
-	mc = (struct microcode_amd *)__pa(amd_ucode_patch);
+	mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
 	if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
 		__apply_microcode_amd(mc);
 		return;
@@ -275,7 +278,7 @@ void load_ucode_amd_ap(void)
 	if (!*ucode || !*usize)
 		return;
 
-	apply_ucode_in_initrd(*ucode, *usize);
+	apply_ucode_in_initrd(*ucode, *usize, false);
 }
 
 static void __init collect_cpu_sig_on_bsp(void *arg)
@@ -339,7 +342,7 @@ void load_ucode_amd_ap(void)
 		 * AP has a different equivalence ID than BSP, looks like
 		 * mixed-steppings silicon so go through the ucode blob anew.
 		 */
-		apply_ucode_in_initrd(ucode_cpio.data, ucode_cpio.size);
+		apply_ucode_in_initrd(ucode_cpio.data, ucode_cpio.size, false);
 	}
 }
 #endif
@@ -347,7 +350,9 @@ void load_ucode_amd_ap(void)
 int __init save_microcode_in_initrd_amd(void)
 {
 	unsigned long cont;
+	int retval = 0;
 	enum ucode_state ret;
+	u8 *cont_va;
 	u32 eax;
 
 	if (!container)
@@ -355,13 +360,15 @@ int __init save_microcode_in_initrd_amd(void)
 
 #ifdef CONFIG_X86_32
 	get_bsp_sig();
-	cont = (unsigned long)container;
+	cont	= (unsigned long)container;
+	cont_va = __va(container);
 #else
 	/*
 	 * We need the physical address of the container for both bitness since
 	 * boot_params.hdr.ramdisk_image is a physical address.
 	 */
-	cont = __pa(container);
+	cont    = __pa(container);
+	cont_va = container;
 #endif
 
 	/*
@@ -372,6 +379,8 @@ int __init save_microcode_in_initrd_amd(void)
 	if (relocated_ramdisk)
 		container = (u8 *)(__va(relocated_ramdisk) +
 			     (cont - boot_params.hdr.ramdisk_image));
+	else
+		container = cont_va;
 
 	if (ucode_new_rev)
 		pr_info("microcode: updated early to new patch_level=0x%08x\n",
@@ -382,7 +391,7 @@ int __init save_microcode_in_initrd_amd(void)
 
 	ret = load_microcode_amd(eax, container, container_size);
 	if (ret != UCODE_OK)
-		return -EINVAL;
+		retval = -EINVAL;
 
 	/*
 	 * This will be freed any msec now, stash patches for the current
@@ -391,5 +400,5 @@ int __init save_microcode_in_initrd_amd(void)
 	container = NULL;
 	container_size = 0;
 
-	return 0;
+	return retval;
 }

arch/x86/kernel/cpu/microcode/core.c

@@ -465,6 +465,14 @@ static void mc_bp_resume(void)
 
 	if (uci->valid && uci->mc)
 		microcode_ops->apply_microcode(cpu);
+	else if (!uci->mc)
+		/*
+		 * We might resume and not have applied late microcode but still
+		 * have a newer patch stashed from the early loader. We don't
+		 * have it in uci->mc so we have to load it the same way we're
+		 * applying patches early on the APs.
+		 */
+		load_ucode_ap();
 }
 
 static struct syscore_ops mc_syscore_ops = {

arch/x86/kernel/cpu/microcode/core_early.c

@@ -124,7 +124,7 @@ void __init load_ucode_bsp(void)
 static bool check_loader_disabled_ap(void)
 {
 #ifdef CONFIG_X86_32
-	return __pa_nodebug(dis_ucode_ldr);
+	return *((bool *)__pa_nodebug(&dis_ucode_ldr));
 #else
 	return dis_ucode_ldr;
 #endif

arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c

@@ -486,14 +486,17 @@ static struct attribute_group snbep_uncore_qpi_format_group = {
 	.attrs = snbep_uncore_qpi_formats_attr,
 };
 
-#define SNBEP_UNCORE_MSR_OPS_COMMON_INIT()			\
-	.init_box	= snbep_uncore_msr_init_box,		\
+#define __SNBEP_UNCORE_MSR_OPS_COMMON_INIT()			\
 	.disable_box	= snbep_uncore_msr_disable_box,		\
 	.enable_box	= snbep_uncore_msr_enable_box,		\
 	.disable_event	= snbep_uncore_msr_disable_event,	\
 	.enable_event	= snbep_uncore_msr_enable_event,	\
 	.read_counter	= uncore_msr_read_counter
 
+#define SNBEP_UNCORE_MSR_OPS_COMMON_INIT()			\
+	__SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),			\
+	.init_box	= snbep_uncore_msr_init_box		\
+
 static struct intel_uncore_ops snbep_uncore_msr_ops = {
 	SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
 };
@@ -1919,6 +1922,30 @@ static struct intel_uncore_type hswep_uncore_cbox = {
 	.format_group		= &hswep_uncore_cbox_format_group,
 };
 
+/*
+ * Write SBOX Initialization register bit by bit to avoid spurious #GPs
+ */
+static void hswep_uncore_sbox_msr_init_box(struct intel_uncore_box *box)
+{
+	unsigned msr = uncore_msr_box_ctl(box);
+
+	if (msr) {
+		u64 init = SNBEP_PMON_BOX_CTL_INT;
+		u64 flags = 0;
+		int i;
+
+		for_each_set_bit(i, (unsigned long *)&init, 64) {
+			flags |= (1ULL << i);
+			wrmsrl(msr, flags);
+		}
+	}
+}
+
+static struct intel_uncore_ops hswep_uncore_sbox_msr_ops = {
+	__SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
+	.init_box		= hswep_uncore_sbox_msr_init_box
+};
+
 static struct attribute *hswep_uncore_sbox_formats_attr[] = {
 	&format_attr_event.attr,
 	&format_attr_umask.attr,
@@ -1944,7 +1971,7 @@ static struct intel_uncore_type hswep_uncore_sbox = {
 	.event_mask		= HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
 	.box_ctl		= HSWEP_S0_MSR_PMON_BOX_CTL,
 	.msr_offset		= HSWEP_SBOX_MSR_OFFSET,
-	.ops			= &snbep_uncore_msr_ops,
+	.ops			= &hswep_uncore_sbox_msr_ops,
 	.format_group		= &hswep_uncore_sbox_format_group,
 };
 
@@ -2025,13 +2052,27 @@ static struct intel_uncore_type hswep_uncore_imc = {
 	SNBEP_UNCORE_PCI_COMMON_INIT(),
 };
 
+static unsigned hswep_uncore_irp_ctrs[] = {0xa0, 0xa8, 0xb0, 0xb8};
+
+static u64 hswep_uncore_irp_read_counter(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+	u64 count = 0;
+
+	pci_read_config_dword(pdev, hswep_uncore_irp_ctrs[hwc->idx], (u32 *)&count);
+	pci_read_config_dword(pdev, hswep_uncore_irp_ctrs[hwc->idx] + 4, (u32 *)&count + 1);
+
+	return count;
+}
+
 static struct intel_uncore_ops hswep_uncore_irp_ops = {
 	.init_box	= snbep_uncore_pci_init_box,
 	.disable_box	= snbep_uncore_pci_disable_box,
 	.enable_box	= snbep_uncore_pci_enable_box,
 	.disable_event	= ivbep_uncore_irp_disable_event,
 	.enable_event	= ivbep_uncore_irp_enable_event,
-	.read_counter	= ivbep_uncore_irp_read_counter,
+	.read_counter	= hswep_uncore_irp_read_counter,
 };
 
 static struct intel_uncore_type hswep_uncore_irp = {

arch/x86/kernel/ptrace.c

@@ -1484,7 +1484,7 @@ unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
 	 */
 	if (work & _TIF_NOHZ) {
 		user_exit();
-		work &= ~TIF_NOHZ;
+		work &= ~_TIF_NOHZ;
 	}
 
 #ifdef CONFIG_SECCOMP

arch/x86/kernel/smpboot.c

@@ -1303,10 +1303,14 @@ static void __ref remove_cpu_from_maps(int cpu)
 	numa_remove_cpu(cpu);
 }
 
+static DEFINE_PER_CPU(struct completion, die_complete);
+
 void cpu_disable_common(void)
 {
 	int cpu = smp_processor_id();
 
+	init_completion(&per_cpu(die_complete, smp_processor_id()));
+
 	remove_siblinginfo(cpu);
 
 	/* It's now safe to remove this processor from the online map */
@@ -1316,8 +1320,6 @@ void cpu_disable_common(void)
 	fixup_irqs();
 }
 
-static DEFINE_PER_CPU(struct completion, die_complete);
-
 int native_cpu_disable(void)
 {
 	int ret;
@@ -1327,16 +1329,21 @@ int native_cpu_disable(void)
 		return ret;
 
 	clear_local_APIC();
-	init_completion(&per_cpu(die_complete, smp_processor_id()));
 	cpu_disable_common();
 
 	return 0;
 }
 
+void cpu_die_common(unsigned int cpu)
+{
+	wait_for_completion_timeout(&per_cpu(die_complete, cpu), HZ);
+}
+
 void native_cpu_die(unsigned int cpu)
 {
 	/* We don't do anything here: idle task is faking death itself. */
-	wait_for_completion_timeout(&per_cpu(die_complete, cpu), HZ);
+
+	cpu_die_common(cpu);
 
 	/* They ack this in play_dead() by setting CPU_DEAD */
 	if (per_cpu(cpu_state, cpu) == CPU_DEAD) {

arch/x86/lib/csum-wrappers_64.c

@@ -41,9 +41,8 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 		while (((unsigned long)src & 6) && len >= 2) {
 			__u16 val16;
 
-			*errp = __get_user(val16, (const __u16 __user *)src);
-			if (*errp)
-				return isum;
+			if (__get_user(val16, (const __u16 __user *)src))
+				goto out_err;
 
 			*(__u16 *)dst = val16;
 			isum = (__force __wsum)add32_with_carry(

arch/x86/mm/init_64.c

@@ -1123,7 +1123,7 @@ void mark_rodata_ro(void)
 	unsigned long end = (unsigned long) &__end_rodata_hpage_align;
 	unsigned long text_end = PFN_ALIGN(&__stop___ex_table);
 	unsigned long rodata_end = PFN_ALIGN(&__end_rodata);
-	unsigned long all_end = PFN_ALIGN(&_end);
+	unsigned long all_end;
 
 	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
 	       (end - start) >> 10);
@@ -1134,7 +1134,16 @@ void mark_rodata_ro(void)
 	/*
 	 * The rodata/data/bss/brk section (but not the kernel text!)
 	 * should also be not-executable.
+	 *
+	 * We align all_end to PMD_SIZE because the existing mapping
+	 * is a full PMD. If we would align _brk_end to PAGE_SIZE we
+	 * split the PMD and the reminder between _brk_end and the end
+	 * of the PMD will remain mapped executable.
+	 *
+	 * Any PMD which was setup after the one which covers _brk_end
+	 * has been zapped already via cleanup_highmem().
 	 */
+	all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
 	set_memory_nx(rodata_start, (all_end - rodata_start) >> PAGE_SHIFT);
 
 	rodata_test();

arch/x86/tools/calc_run_size.pl

+#!/usr/bin/perl
+#
+# Calculate the amount of space needed to run the kernel, including room for
+# the .bss and .brk sections.
+#
+# Usage:
+# objdump -h a.out | perl calc_run_size.pl
+use strict;
+
+my $mem_size = 0;
+my $file_offset = 0;
+
+my $sections=" *[0-9]+ \.(?:bss|brk) +";
+while (<>) {
+	if (/^$sections([0-9a-f]+) +(?:[0-9a-f]+ +){2}([0-9a-f]+)/) {
+		my $size = hex($1);
+		my $offset = hex($2);
+		$mem_size += $size;
+		if ($file_offset == 0) {
+			$file_offset = $offset;
+		} elsif ($file_offset != $offset) {
+			# BFD linker shows the same file offset in ELF.
+			# Gold linker shows them as consecutive.
+			next if ($file_offset + $mem_size == $offset + $size);
+
+			printf STDERR "file_offset: 0x%lx\n", $file_offset;
+			printf STDERR "mem_size: 0x%lx\n", $mem_size;
+			printf STDERR "offset: 0x%lx\n", $offset;
+			printf STDERR "size: 0x%lx\n", $size;
+
+			die ".bss and .brk are non-contiguous\n";
+		}
+	}
+}
+
+if ($file_offset == 0) {
+	die "Never found .bss or .brk file offset\n";
+}
+printf("%d\n", $mem_size + $file_offset);

arch/x86/xen/smp.c

@@ -510,6 +510,9 @@ static void xen_cpu_die(unsigned int cpu)
 		current->state = TASK_UNINTERRUPTIBLE;
 		schedule_timeout(HZ/10);
 	}
+
+	cpu_die_common(cpu);
+
 	xen_smp_intr_free(cpu);
 	xen_uninit_lock_cpu(cpu);
 	xen_teardown_timer(cpu);

block/blk-merge.c

@@ -97,19 +97,22 @@ void blk_recalc_rq_segments(struct request *rq)
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
 {
-	bool no_sg_merge = !!test_bit(QUEUE_FLAG_NO_SG_MERGE,
-			&q->queue_flags);
-	bool merge_not_need = bio->bi_vcnt < queue_max_segments(q);
+	unsigned short seg_cnt;
+
+	/* estimate segment number by bi_vcnt for non-cloned bio */
+	if (bio_flagged(bio, BIO_CLONED))
+		seg_cnt = bio_segments(bio);
+	else
+		seg_cnt = bio->bi_vcnt;
 
-	if (no_sg_merge && !bio_flagged(bio, BIO_CLONED) &&
-			merge_not_need)
-		bio->bi_phys_segments = bio->bi_vcnt;
+	if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags) &&
+			(seg_cnt < queue_max_segments(q)))
+		bio->bi_phys_segments = seg_cnt;
 	else {
 		struct bio *nxt = bio->bi_next;
 
 		bio->bi_next = NULL;
-		bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio,
-				no_sg_merge && merge_not_need);
+		bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, false);
 		bio->bi_next = nxt;
 	}
 

block/blk-mq.c

@@ -107,11 +107,7 @@ static void blk_mq_usage_counter_release(struct percpu_ref *ref)
 	wake_up_all(&q->mq_freeze_wq);
 }
 
-/*
- * Guarantee no request is in use, so we can change any data structure of
- * the queue afterward.
- */
-void blk_mq_freeze_queue(struct request_queue *q)
+static void blk_mq_freeze_queue_start(struct request_queue *q)
 {
 	bool freeze;
 
@@ -123,9 +119,23 @@ void blk_mq_freeze_queue(struct request_queue *q)
 		percpu_ref_kill(&q->mq_usage_counter);
 		blk_mq_run_queues(q, false);
 	}
+}
+
+static void blk_mq_freeze_queue_wait(struct request_queue *q)
+{
 	wait_event(q->mq_freeze_wq, percpu_ref_is_zero(&q->mq_usage_counter));
 }
 
+/*
+ * Guarantee no request is in use, so we can change any data structure of
+ * the queue afterward.
+ */
+void blk_mq_freeze_queue(struct request_queue *q)
+{
+	blk_mq_freeze_queue_start(q);
+	blk_mq_freeze_queue_wait(q);
+}
+
 static void blk_mq_unfreeze_queue(struct request_queue *q)
 {
 	bool wake;
@@ -1921,7 +1931,7 @@ void blk_mq_free_queue(struct request_queue *q)
 /* Basically redo blk_mq_init_queue with queue frozen */
 static void blk_mq_queue_reinit(struct request_queue *q)
 {
-	blk_mq_freeze_queue(q);
+	WARN_ON_ONCE(!q->mq_freeze_depth);
 
 	blk_mq_sysfs_unregister(q);
 
@@ -1936,8 +1946,6 @@ static void blk_mq_queue_reinit(struct request_queue *q)
 	blk_mq_map_swqueue(q);
 
 	blk_mq_sysfs_register(q);
-
-	blk_mq_unfreeze_queue(q);
 }
 
 static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
@@ -1956,8 +1964,25 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
 		return NOTIFY_OK;
 
 	mutex_lock(&all_q_mutex);
+
+	/*
+	 * We need to freeze and reinit all existing queues.  Freezing
+	 * involves synchronous wait for an RCU grace period and doing it
+	 * one by one may take a long time.  Start freezing all queues in
+	 * one swoop and then wait for the completions so that freezing can
+	 * take place in parallel.
+	 */
+	list_for_each_entry(q, &all_q_list, all_q_node)
+		blk_mq_freeze_queue_start(q);
+	list_for_each_entry(q, &all_q_list, all_q_node)
+		blk_mq_freeze_queue_wait(q);
+
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_queue_reinit(q);
+
+	list_for_each_entry(q, &all_q_list, all_q_node)
+		blk_mq_unfreeze_queue(q);
+
 	mutex_unlock(&all_q_mutex);
 	return NOTIFY_OK;
 }

block/ioprio.c

@@ -157,14 +157,16 @@ static int get_task_ioprio(struct task_struct *p)
 
 int ioprio_best(unsigned short aprio, unsigned short bprio)
 {
-	unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
-	unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
+	unsigned short aclass;
+	unsigned short bclass;
 
-	if (aclass == IOPRIO_CLASS_NONE)
-		aclass = IOPRIO_CLASS_BE;
-	if (bclass == IOPRIO_CLASS_NONE)
-		bclass = IOPRIO_CLASS_BE;
+	if (!ioprio_valid(aprio))
+		aprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM);
+	if (!ioprio_valid(bprio))
+		bprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM);
 
+	aclass = IOPRIO_PRIO_CLASS(aprio);
+	bclass = IOPRIO_PRIO_CLASS(bprio);
 	if (aclass == bclass)
 		return min(aprio, bprio);
 	if (aclass > bclass)

block/scsi_ioctl.c

@@ -458,7 +458,7 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
 	rq = blk_get_request(q, in_len ? WRITE : READ, __GFP_WAIT);
 	if (IS_ERR(rq)) {
 		err = PTR_ERR(rq);
-		goto error;
+		goto error_free_buffer;
 	}
 	blk_rq_set_block_pc(rq);
 
@@ -531,9 +531,11 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
 	}
 	
 error:
+	blk_put_request(rq);
+
+error_free_buffer:
 	kfree(buffer);
-	if (rq)
-		blk_put_request(rq);
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(sg_scsi_ioctl);

drivers/acpi/blacklist.c

@@ -290,6 +290,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		    DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3446"),
 		},
 	},
+	{
+	.callback = dmi_disable_osi_win8,
+	.ident = "Dell Vostro 3546",
+	.matches = {
+		    DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		    DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3546"),
+		},
+	},
 
 	/*
 	 * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.

drivers/acpi/device_pm.c

@@ -878,7 +878,7 @@ int acpi_dev_suspend_late(struct device *dev)
 		return 0;
 
 	target_state = acpi_target_system_state();
-	wakeup = device_may_wakeup(dev);
+	wakeup = device_may_wakeup(dev) && acpi_device_can_wakeup(adev);
 	error = acpi_device_wakeup(adev, target_state, wakeup);
 	if (wakeup && error)
 		return error;

drivers/ata/ahci.c

@@ -60,6 +60,7 @@ enum board_ids {
 	/* board IDs by feature in alphabetical order */
 	board_ahci,
 	board_ahci_ign_iferr,
+	board_ahci_nomsi,
 	board_ahci_noncq,
 	board_ahci_nosntf,
 	board_ahci_yes_fbs,
@@ -121,6 +122,13 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
+	[board_ahci_nomsi] = {
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_MSI),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 	[board_ahci_noncq] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ),
 		.flags		= AHCI_FLAG_COMMON,
@@ -313,6 +321,11 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
+	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
+	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -475,10 +488,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
 
 	/*
-	 * Samsung SSDs found on some macbooks.  NCQ times out.
-	 * https://bugzilla.kernel.org/show_bug.cgi?id=60731
+	 * Samsung SSDs found on some macbooks.  NCQ times out if MSI is
+	 * enabled.  https://bugzilla.kernel.org/show_bug.cgi?id=60731
 	 */
-	{ PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq },
+	{ PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_nomsi },
 
 	/* Enmotus */
 	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
@@ -514,12 +527,9 @@ MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
 static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 					 struct ahci_host_priv *hpriv)
 {
-	unsigned int force_port_map = 0;
-	unsigned int mask_port_map = 0;
-
 	if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
 		dev_info(&pdev->dev, "JMB361 has only one port\n");
-		force_port_map = 1;
+		hpriv->force_port_map = 1;
 	}
 
 	/*
@@ -529,9 +539,9 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 	 */
 	if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
 		if (pdev->device == 0x6121)
-			mask_port_map = 0x3;
+			hpriv->mask_port_map = 0x3;
 		else
-			mask_port_map = 0xf;
+			hpriv->mask_port_map = 0xf;
 		dev_info(&pdev->dev,
 			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 	}

drivers/ata/libahci.c

@@ -1778,16 +1778,15 @@ static void ahci_handle_port_interrupt(struct ata_port *ap,
 	}
 }
 
-static void ahci_update_intr_status(struct ata_port *ap)
+static void ahci_port_intr(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_port_priv *pp = ap->private_data;
 	u32 status;
 
 	status = readl(port_mmio + PORT_IRQ_STAT);
 	writel(status, port_mmio + PORT_IRQ_STAT);
 
-	atomic_or(status, &pp->intr_status);
+	ahci_handle_port_interrupt(ap, port_mmio, status);
 }
 
 static irqreturn_t ahci_port_thread_fn(int irq, void *dev_instance)
@@ -1808,34 +1807,6 @@ static irqreturn_t ahci_port_thread_fn(int irq, void *dev_instance)
 	return IRQ_HANDLED;
 }
 
-irqreturn_t ahci_thread_fn(int irq, void *dev_instance)
-{
-	struct ata_host *host = dev_instance;
-	struct ahci_host_priv *hpriv = host->private_data;
-	u32 irq_masked = hpriv->port_map;
-	unsigned int i;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap;
-
-		if (!(irq_masked & (1 << i)))
-			continue;
-
-		ap = host->ports[i];
-		if (ap) {
-			ahci_port_thread_fn(irq, ap);
-			VPRINTK("port %u\n", i);
-		} else {
-			VPRINTK("port %u (no irq)\n", i);
-			if (ata_ratelimit())
-				dev_warn(host->dev,
-					 "interrupt on disabled port %u\n", i);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
 static irqreturn_t ahci_multi_irqs_intr(int irq, void *dev_instance)
 {
 	struct ata_port *ap = dev_instance;
@@ -1875,6 +1846,8 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
 
 	irq_masked = irq_stat & hpriv->port_map;
 
+	spin_lock(&host->lock);
+
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap;
 
@@ -1883,7 +1856,7 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
 
 		ap = host->ports[i];
 		if (ap) {
-			ahci_update_intr_status(ap);
+			ahci_port_intr(ap);
 			VPRINTK("port %u\n", i);
 		} else {
 			VPRINTK("port %u (no irq)\n", i);
@@ -1906,9 +1879,11 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
 	 */
 	writel(irq_stat, mmio + HOST_IRQ_STAT);
 
+	spin_unlock(&host->lock);
+
 	VPRINTK("EXIT\n");
 
-	return handled ? IRQ_WAKE_THREAD : IRQ_NONE;
+	return IRQ_RETVAL(handled);
 }
 
 unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
@@ -2320,8 +2295,13 @@ static int ahci_port_start(struct ata_port *ap)
 	 */
 	pp->intr_mask = DEF_PORT_IRQ;
 
-	spin_lock_init(&pp->lock);
-	ap->lock = &pp->lock;
+	/*
+	 * Switch to per-port locking in case each port has its own MSI vector.
+	 */
+	if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
+		spin_lock_init(&pp->lock);
+		ap->lock = &pp->lock;
+	}
 
 	ap->private_data = pp;
 
@@ -2482,31 +2462,6 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
 	return rc;
 }
 
-static int ahci_host_activate_single_irq(struct ata_host *host, int irq,
-					 struct scsi_host_template *sht)
-{
-	int i, rc;
-
-	rc = ata_host_start(host);
-	if (rc)
-		return rc;
-
-	rc = devm_request_threaded_irq(host->dev, irq, ahci_single_irq_intr,
-				       ahci_thread_fn, IRQF_SHARED,
-				       dev_driver_string(host->dev), host);
-	if (rc)
-		return rc;
-
-	for (i = 0; i < host->n_ports; i++)
-		ata_port_desc(host->ports[i], "irq %d", irq);
-
-	rc = ata_host_register(host, sht);
-	if (rc)
-		devm_free_irq(host->dev, irq, host);
-
-	return rc;
-}
-
 /**
  *	ahci_host_activate - start AHCI host, request IRQs and register it
  *	@host: target ATA host
@@ -2532,7 +2487,8 @@ int ahci_host_activate(struct ata_host *host, int irq,
 	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
 		rc = ahci_host_activate_multi_irqs(host, irq, sht);
 	else
-		rc = ahci_host_activate_single_irq(host, irq, sht);
+		rc = ata_host_activate(host, irq, ahci_single_irq_intr,
+				       IRQF_SHARED, sht);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(ahci_host_activate);

drivers/ata/sata_rcar.c

@@ -146,6 +146,7 @@
 enum sata_rcar_type {
 	RCAR_GEN1_SATA,
 	RCAR_GEN2_SATA,
+	RCAR_R8A7790_ES1_SATA,
 };
 
 struct sata_rcar_priv {
@@ -763,6 +764,9 @@ static void sata_rcar_setup_port(struct ata_host *host)
 	ap->udma_mask	= ATA_UDMA6;
 	ap->flags	|= ATA_FLAG_SATA;
 
+	if (priv->type == RCAR_R8A7790_ES1_SATA)
+		ap->flags	|= ATA_FLAG_NO_DIPM;
+
 	ioaddr->cmd_addr = base + SDATA_REG;
 	ioaddr->ctl_addr = base + SSDEVCON_REG;
 	ioaddr->scr_addr = base + SCRSSTS_REG;
@@ -792,6 +796,7 @@ static void sata_rcar_init_controller(struct ata_host *host)
 		sata_rcar_gen1_phy_init(priv);
 		break;
 	case RCAR_GEN2_SATA:
+	case RCAR_R8A7790_ES1_SATA:
 		sata_rcar_gen2_phy_init(priv);
 		break;
 	default:
@@ -837,10 +842,18 @@ static struct of_device_id sata_rcar_match[] = {
 		.compatible = "renesas,sata-r8a7790",
 		.data = (void *)RCAR_GEN2_SATA
 	},
+	{
+		.compatible = "renesas,sata-r8a7790-es1",
+		.data = (void *)RCAR_R8A7790_ES1_SATA
+	},
 	{
 		.compatible = "renesas,sata-r8a7791",
 		.data = (void *)RCAR_GEN2_SATA
 	},
+	{
+		.compatible = "renesas,sata-r8a7793",
+		.data = (void *)RCAR_GEN2_SATA
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sata_rcar_match);
@@ -849,7 +862,9 @@ static const struct platform_device_id sata_rcar_id_table[] = {
 	{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
 	{ "sata-r8a7779", RCAR_GEN1_SATA },
 	{ "sata-r8a7790", RCAR_GEN2_SATA },
+	{ "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA },
 	{ "sata-r8a7791", RCAR_GEN2_SATA },
+	{ "sata-r8a7793", RCAR_GEN2_SATA },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);

drivers/base/power/domain.c

@@ -361,9 +361,19 @@ static int __pm_genpd_save_device(struct pm_domain_data *pdd,
 	struct device *dev = pdd->dev;
 	int ret = 0;
 
-	if (gpd_data->need_restore)
+	if (gpd_data->need_restore > 0)
 		return 0;
 
+	/*
+	 * If the value of the need_restore flag is still unknown at this point,
+	 * we trust that pm_genpd_poweroff() has verified that the device is
+	 * already runtime PM suspended.
+	 */
+	if (gpd_data->need_restore < 0) {
+		gpd_data->need_restore = 1;
+		return 0;
+	}
+
 	mutex_unlock(&genpd->lock);
 
 	genpd_start_dev(genpd, dev);
@@ -373,7 +383,7 @@ static int __pm_genpd_save_device(struct pm_domain_data *pdd,
 	mutex_lock(&genpd->lock);
 
 	if (!ret)
-		gpd_data->need_restore = true;
+		gpd_data->need_restore = 1;
 
 	return ret;
 }
@@ -389,12 +399,17 @@ static void __pm_genpd_restore_device(struct pm_domain_data *pdd,
 {
 	struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
 	struct device *dev = pdd->dev;
-	bool need_restore = gpd_data->need_restore;
+	int need_restore = gpd_data->need_restore;
 
-	gpd_data->need_restore = false;
+	gpd_data->need_restore = 0;
 	mutex_unlock(&genpd->lock);
 
 	genpd_start_dev(genpd, dev);
+
+	/*
+	 * Call genpd_restore_dev() for recently added devices too (need_restore
+	 * is negative then).
+	 */
 	if (need_restore)
 		genpd_restore_dev(genpd, dev);
 
@@ -603,6 +618,7 @@ static void genpd_power_off_work_fn(struct work_struct *work)
 static int pm_genpd_runtime_suspend(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
+	struct generic_pm_domain_data *gpd_data;
 	bool (*stop_ok)(struct device *__dev);
 	int ret;
 
@@ -628,6 +644,16 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 		return 0;
 
 	mutex_lock(&genpd->lock);
+
+	/*
+	 * If we have an unknown state of the need_restore flag, it means none
+	 * of the runtime PM callbacks has been invoked yet. Let's update the
+	 * flag to reflect that the current state is active.
+	 */
+	gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
+	if (gpd_data->need_restore < 0)
+		gpd_data->need_restore = 0;
+
 	genpd->in_progress++;
 	pm_genpd_poweroff(genpd);
 	genpd->in_progress--;
@@ -1437,12 +1463,12 @@ int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
 	spin_unlock_irq(&dev->power.lock);
 
 	if (genpd->attach_dev)
-		genpd->attach_dev(dev);
+		genpd->attach_dev(genpd, dev);
 
 	mutex_lock(&gpd_data->lock);
 	gpd_data->base.dev = dev;
 	list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
-	gpd_data->need_restore = genpd->status == GPD_STATE_POWER_OFF;
+	gpd_data->need_restore = -1;
 	gpd_data->td.constraint_changed = true;
 	gpd_data->td.effective_constraint_ns = -1;
 	mutex_unlock(&gpd_data->lock);
@@ -1499,7 +1525,7 @@ int pm_genpd_remove_device(struct generic_pm_domain *genpd,
 	genpd->max_off_time_changed = true;
 
 	if (genpd->detach_dev)
-		genpd->detach_dev(dev);
+		genpd->detach_dev(genpd, dev);
 
 	spin_lock_irq(&dev->power.lock);
 
@@ -1546,7 +1572,7 @@ void pm_genpd_dev_need_restore(struct device *dev, bool val)
 
 	psd = dev_to_psd(dev);
 	if (psd && psd->domain_data)
-		to_gpd_data(psd->domain_data)->need_restore = val;
+		to_gpd_data(psd->domain_data)->need_restore = val ? 1 : 0;
 
 	spin_unlock_irqrestore(&dev->power.lock, flags);
 }

drivers/cpufreq/cpufreq-dt.c

@@ -166,8 +166,8 @@ static int allocate_resources(int cpu, struct device **cdev,
 		if (ret == -EPROBE_DEFER)
 			dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
 		else
-			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret,
-				cpu);
+			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
+				ret);
 	} else {
 		*cdev = cpu_dev;
 		*creg = cpu_reg;

drivers/cpufreq/cpufreq.c

@@ -1022,7 +1022,8 @@ static struct cpufreq_policy *cpufreq_policy_restore(unsigned int cpu)
 
 	read_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
-	policy->governor = NULL;
+	if (policy)
+		policy->governor = NULL;
 
 	return policy;
 }

drivers/dma/pl330.c

@@ -271,7 +271,7 @@ struct pl330_config {
 #define DMAC_MODE_NS	(1 << 0)
 	unsigned int	mode;
 	unsigned int	data_bus_width:10; /* In number of bits */
-	unsigned int	data_buf_dep:10;
+	unsigned int	data_buf_dep:11;
 	unsigned int	num_chan:4;
 	unsigned int	num_peri:6;
 	u32		peri_ns;
@@ -2336,7 +2336,7 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
 	int burst_len;
 
 	burst_len = pl330->pcfg.data_bus_width / 8;
-	burst_len *= pl330->pcfg.data_buf_dep;
+	burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
 	burst_len >>= desc->rqcfg.brst_size;
 
 	/* src/dst_burst_len can't be more than 16 */
@@ -2459,16 +2459,25 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	/* Select max possible burst size */
 	burst = pl330->pcfg.data_bus_width / 8;
 
-	while (burst > 1) {
-		if (!(len % burst))
-			break;
+	/*
+	 * Make sure we use a burst size that aligns with all the memcpy
+	 * parameters because our DMA programming algorithm doesn't cope with
+	 * transfers which straddle an entry in the DMA device's MFIFO.
+	 */
+	while ((src | dst | len) & (burst - 1))
 		burst /= 2;
-	}
 
 	desc->rqcfg.brst_size = 0;
 	while (burst != (1 << desc->rqcfg.brst_size))
 		desc->rqcfg.brst_size++;
 
+	/*
+	 * If burst size is smaller than bus width then make sure we only
+	 * transfer one at a time to avoid a burst stradling an MFIFO entry.
+	 */
+	if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
+		desc->rqcfg.brst_len = 1;
+
 	desc->rqcfg.brst_len = get_burst_len(desc, len);
 
 	desc->txd.flags = flags;
@@ -2732,7 +2741,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 
 
 	dev_info(&adev->dev,
-		"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
+		"Loaded driver for PL330 DMAC-%x\n", adev->periphid);
 	dev_info(&adev->dev,
 		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
 		pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,

drivers/dma/sun6i-dma.c

@@ -230,30 +230,25 @@ static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
 		readl(pchan->base + DMA_CHAN_CUR_PARA));
 }
 
-static inline int convert_burst(u32 maxburst, u8 *burst)
+static inline s8 convert_burst(u32 maxburst)
 {
 	switch (maxburst) {
 	case 1:
-		*burst = 0;
-		break;
+		return 0;
 	case 8:
-		*burst = 2;
-		break;
+		return 2;
 	default:
 		return -EINVAL;
 	}
-
-	return 0;
 }
 
-static inline int convert_buswidth(enum dma_slave_buswidth addr_width, u8 *width)
+static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
 {
 	if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
 	    (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
 		return -EINVAL;
 
-	*width = addr_width >> 1;
-	return 0;
+	return addr_width >> 1;
 }
 
 static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
@@ -284,26 +279,25 @@ static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
 				    struct dma_slave_config *config)
 {
 	u8 src_width, dst_width, src_burst, dst_burst;
-	int ret;
 
 	if (!config)
 		return -EINVAL;
 
-	ret = convert_burst(config->src_maxburst, &src_burst);
-	if (ret)
-		return ret;
+	src_burst = convert_burst(config->src_maxburst);
+	if (src_burst)
+		return src_burst;
 
-	ret = convert_burst(config->dst_maxburst, &dst_burst);
-	if (ret)
-		return ret;
+	dst_burst = convert_burst(config->dst_maxburst);
+	if (dst_burst)
+		return dst_burst;
 
-	ret = convert_buswidth(config->src_addr_width, &src_width);
-	if (ret)
-		return ret;
+	src_width = convert_buswidth(config->src_addr_width);
+	if (src_width)
+		return src_width;
 
-	ret = convert_buswidth(config->dst_addr_width, &dst_width);
-	if (ret)
-		return ret;
+	dst_width = convert_buswidth(config->dst_addr_width);
+	if (dst_width)
+		return dst_width;
 
 	lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
 		DMA_CHAN_CFG_SRC_WIDTH(src_width) |
@@ -542,11 +536,10 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
 {
 	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
 	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
-	struct dma_slave_config *sconfig = &vchan->cfg;
 	struct sun6i_dma_lli *v_lli;
 	struct sun6i_desc *txd;
 	dma_addr_t p_lli;
-	int ret;
+	s8 burst, width;
 
 	dev_dbg(chan2dev(chan),
 		"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
@@ -565,14 +558,21 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
 		goto err_txd_free;
 	}
 
-	ret = sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig);
-	if (ret)
-		goto err_dma_free;
+	v_lli->src = src;
+	v_lli->dst = dest;
+	v_lli->len = len;
+	v_lli->para = NORMAL_WAIT;
 
+	burst = convert_burst(8);
+	width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
 		DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
 		DMA_CHAN_CFG_DST_LINEAR_MODE |
-		DMA_CHAN_CFG_SRC_LINEAR_MODE;
+		DMA_CHAN_CFG_SRC_LINEAR_MODE |
+		DMA_CHAN_CFG_SRC_BURST(burst) |
+		DMA_CHAN_CFG_SRC_WIDTH(width) |
+		DMA_CHAN_CFG_DST_BURST(burst) |
+		DMA_CHAN_CFG_DST_WIDTH(width);
 
 	sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
 
@@ -580,8 +580,6 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
 
 	return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
 
-err_dma_free:
-	dma_pool_free(sdev->pool, v_lli, p_lli);
 err_txd_free:
 	kfree(txd);
 	return NULL;
@@ -915,6 +913,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 	sdc->slave.device_prep_dma_memcpy	= sun6i_dma_prep_dma_memcpy;
 	sdc->slave.device_control		= sun6i_dma_control;
 	sdc->slave.chancnt			= NR_MAX_VCHANS;
+	sdc->slave.copy_align			= 4;
 
 	sdc->slave.dev = &pdev->dev;
 

drivers/firewire/core-cdev.c

@@ -1637,8 +1637,7 @@ static int dispatch_ioctl(struct client *client,
 	    _IOC_SIZE(cmd) > sizeof(buffer))
 		return -ENOTTY;
 
-	if (_IOC_DIR(cmd) == _IOC_READ)
-		memset(&buffer, 0, _IOC_SIZE(cmd));
+	memset(&buffer, 0, sizeof(buffer));
 
 	if (_IOC_DIR(cmd) & _IOC_WRITE)
 		if (copy_from_user(&buffer, arg, _IOC_SIZE(cmd)))

drivers/gpu/drm/exynos/exynos_drm_drv.c

@@ -495,6 +495,12 @@ static struct component_match *exynos_drm_match_add(struct device *dev)
 
 	mutex_lock(&drm_component_lock);
 
+	/* Do not retry to probe if there is no any kms driver regitered. */
+	if (list_empty(&drm_component_list)) {
+		mutex_unlock(&drm_component_lock);
+		return ERR_PTR(-ENODEV);
+	}
+
 	list_for_each_entry(cdev, &drm_component_list, list) {
 		/*
 		 * Add components to master only in case that crtc and
@@ -585,10 +591,21 @@ static int exynos_drm_platform_probe(struct platform_device *pdev)
 		goto err_unregister_mixer_drv;
 #endif
 
+	match = exynos_drm_match_add(&pdev->dev);
+	if (IS_ERR(match)) {
+		ret = PTR_ERR(match);
+		goto err_unregister_hdmi_drv;
+	}
+
+	ret = component_master_add_with_match(&pdev->dev, &exynos_drm_ops,
+						match);
+	if (ret < 0)
+		goto err_unregister_hdmi_drv;
+
 #ifdef CONFIG_DRM_EXYNOS_G2D
 	ret = platform_driver_register(&g2d_driver);
 	if (ret < 0)
-		goto err_unregister_hdmi_drv;
+		goto err_del_component_master;
 #endif
 
 #ifdef CONFIG_DRM_EXYNOS_FIMC
@@ -619,23 +636,9 @@ static int exynos_drm_platform_probe(struct platform_device *pdev)
 		goto err_unregister_ipp_drv;
 #endif
 
-	match = exynos_drm_match_add(&pdev->dev);
-	if (IS_ERR(match)) {
-		ret = PTR_ERR(match);
-		goto err_unregister_resources;
-	}
-
-	ret = component_master_add_with_match(&pdev->dev, &exynos_drm_ops,
-						match);
-	if (ret < 0)
-		goto err_unregister_resources;
-
 	return ret;
 
-err_unregister_resources:
-
 #ifdef CONFIG_DRM_EXYNOS_IPP
-	exynos_platform_device_ipp_unregister();
 err_unregister_ipp_drv:
 	platform_driver_unregister(&ipp_driver);
 err_unregister_gsc_drv:
@@ -658,9 +661,11 @@ static int exynos_drm_platform_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_DRM_EXYNOS_G2D
 	platform_driver_unregister(&g2d_driver);
-err_unregister_hdmi_drv:
+err_del_component_master:
 #endif
+	component_master_del(&pdev->dev, &exynos_drm_ops);
 
+err_unregister_hdmi_drv:
 #ifdef CONFIG_DRM_EXYNOS_HDMI
 	platform_driver_unregister(&hdmi_driver);
 err_unregister_mixer_drv:
@@ -741,6 +746,18 @@ static int exynos_drm_init(void)
 {
 	int ret;
 
+	/*
+	 * Register device object only in case of Exynos SoC.
+	 *
+	 * Below codes resolves temporarily infinite loop issue incurred
+	 * by Exynos drm driver when using multi-platform kernel.
+	 * So these codes will be replaced with more generic way later.
+	 */
+	if (!of_machine_is_compatible("samsung,exynos3") &&
+			!of_machine_is_compatible("samsung,exynos4") &&
+			!of_machine_is_compatible("samsung,exynos5"))
+		return -ENODEV;
+
 	exynos_drm_pdev = platform_device_register_simple("exynos-drm", -1,
 								NULL, 0);
 	if (IS_ERR(exynos_drm_pdev))

drivers/gpu/drm/exynos/exynos_drm_g2d.c

@@ -302,9 +302,12 @@ static void g2d_fini_cmdlist(struct g2d_data *g2d)
 	struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
 
 	kfree(g2d->cmdlist_node);
-	dma_free_attrs(subdrv->drm_dev->dev, G2D_CMDLIST_POOL_SIZE,
-			g2d->cmdlist_pool_virt,
-			g2d->cmdlist_pool, &g2d->cmdlist_dma_attrs);
+
+	if (g2d->cmdlist_pool_virt && g2d->cmdlist_pool) {
+		dma_free_attrs(subdrv->drm_dev->dev, G2D_CMDLIST_POOL_SIZE,
+				g2d->cmdlist_pool_virt,
+				g2d->cmdlist_pool, &g2d->cmdlist_dma_attrs);
+	}
 }
 
 static struct g2d_cmdlist_node *g2d_get_cmdlist(struct g2d_data *g2d)

drivers/gpu/drm/i915/i915_dma.c

@@ -1670,15 +1670,17 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		goto out_regs;
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = i915_kick_out_vgacon(dev_priv);
+		/* WARNING: Apparently we must kick fbdev drivers before vgacon,
+		 * otherwise the vga fbdev driver falls over. */
+		ret = i915_kick_out_firmware_fb(dev_priv);
 		if (ret) {
-			DRM_ERROR("failed to remove conflicting VGA console\n");
+			DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
 			goto out_gtt;
 		}
 
-		ret = i915_kick_out_firmware_fb(dev_priv);
+		ret = i915_kick_out_vgacon(dev_priv);
 		if (ret) {
-			DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
+			DRM_ERROR("failed to remove conflicting VGA console\n");
 			goto out_gtt;
 		}
 	}

drivers/gpu/drm/i915/i915_gem_tiling.c

@@ -364,22 +364,9 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 		 * has to also include the unfenced register the GPU uses
 		 * whilst executing a fenced command for an untiled object.
 		 */
-
-		obj->map_and_fenceable =
-			!i915_gem_obj_ggtt_bound(obj) ||
-			(i915_gem_obj_ggtt_offset(obj) +
-			 obj->base.size <= dev_priv->gtt.mappable_end &&
-			 i915_gem_object_fence_ok(obj, args->tiling_mode));
-
-		/* Rebind if we need a change of alignment */
-		if (!obj->map_and_fenceable) {
-			u32 unfenced_align =
-				i915_gem_get_gtt_alignment(dev, obj->base.size,
-							    args->tiling_mode,
-							    false);
-			if (i915_gem_obj_ggtt_offset(obj) & (unfenced_align - 1))
-				ret = i915_gem_object_ggtt_unbind(obj);
-		}
+		if (obj->map_and_fenceable &&
+		    !i915_gem_object_fence_ok(obj, args->tiling_mode))
+			ret = i915_gem_object_ggtt_unbind(obj);
 
 		if (ret == 0) {
 			obj->fence_dirty =