Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 1247034e 编写于 作者: O Olof Johansson
浏览文件
操作

Merge tag 'at91-drivers' of git://github.com/at91linux/linux-at91 into next/drivers 

From Nicolas Ferre:
Adding the DT support to USB gadget High-Speed aka usba.

* tag 'at91-drivers' of git://github.com/at91linux/linux-at91:
  USB: gadget: atmel_usba: add DT support
  USB: gadget: atmel_usba: allow multi instance
  USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
  ARM: at91: udpate defconfigs
  ARM: at91: dt: switch to standard IRQ flag defines
  ARM: at91: dt: switch to pinctrl to pre-processor
  ARM: at91: dt: add pinctrl pre-processor define
  ARM: at91: dt: switch to standard GPIO flag defines.
  ARM: at91: dt: use #include for all device trees
Signed-off-by: NOlof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/boot/dts/at91sam9260.dtsi
	arch/arm/boot/dts/sama5d3.dtsi
上级 38d77ff9 4a3ae932
展开全部 隐藏空白更改
内联 并排
Showing with 1676 addition and 1698 deletion
Documentation/devicetree/bindings/usb/atmel-usb.txt
浏览文件 @ 1247034e
...@@ -47,3 +47,85 @@ usb1: gadget@fffa4000 { ...@@ -47,3 +47,85 @@ usb1: gadget@fffa4000 {
interrupts = <10 4>; interrupts = <10 4>;
atmel,vbus-gpio = <&pioC 5 0>; atmel,vbus-gpio = <&pioC 5 0>;
}; };
Atmel High-Speed USB device controller
Required properties:
- compatible: Should be "atmel,at91sam9rl-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- ep childnode: To specify the number of endpoints and their properties.
Optional properties:
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
activated for the bus to be powered.
Required child node properties:
- name: Name of the endpoint.
- reg: Num of the endpoint.
- atmel,fifo-size: Size of the fifo.
- atmel,nb-banks: Number of banks.
- atmel,can-dma: Boolean to specify if the endpoint support DMA.
- atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
usb2: gadget@fff78000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9rl-udc";
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 4 0>;
atmel,vbus-gpio = <&pioB 19 0>;
ep0 {
reg = <0>;
atmel,fifo-size = <64>;
atmel,nb-banks = <1>;
};
ep1 {
reg = <1>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
atmel,can-isoc;
};
ep2 {
reg = <2>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <2>;
atmel,can-dma;
atmel,can-isoc;
};
ep3 {
reg = <3>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
};
ep4 {
reg = <4>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
};
ep5 {
reg = <5>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
atmel,can-isoc;
};
ep6 {
reg = <6>;
atmel,fifo-size = <1024>;
atmel,nb-banks = <3>;
atmel,can-dma;
atmel,can-isoc;
};
};
arch/arm/boot/dts/aks-cdu.dts
浏览文件 @ 1247034e
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
/dts-v1/; /dts-v1/;
/include/ "ge863-pro3.dtsi" #include "ge863-pro3.dtsi"
/ { / {
chosen { chosen {
...@@ -46,7 +46,7 @@ ...@@ -46,7 +46,7 @@
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 15 0>; atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
}; };
...@@ -90,23 +90,23 @@ ...@@ -90,23 +90,23 @@
compatible = "gpio-leds"; compatible = "gpio-leds";
red { red {
gpios = <&pioC 10 0>; gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none"; linux,default-trigger = "none";
}; };
green { green {
gpios = <&pioA 5 1>; gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
default-state = "on"; default-state = "on";
}; };
yellow { yellow {
gpios = <&pioB 20 1>; gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
}; };
blue { blue {
gpios = <&pioB 21 1>; gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
}; };
}; };
......
arch/arm/boot/dts/animeo_ip.dts
浏览文件 @ 1247034e
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9260.dtsi" #include "at91sam9260.dtsi"
/ { / {
model = "Somfy Animeo IP"; model = "Somfy Animeo IP";
...@@ -123,7 +123,7 @@ ...@@ -123,7 +123,7 @@
usb0: ohci@00500000 { usb0: ohci@00500000 {
num-ports = <2>; num-ports = <2>;
atmel,vbus-gpio = <&pioB 15 1>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
status = "okay"; status = "okay";
}; };
}; };
...@@ -133,23 +133,23 @@ ...@@ -133,23 +133,23 @@
power_green { power_green {
label = "power_green"; label = "power_green";
gpios = <&pioC 17 0>; gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
power_red { power_red {
label = "power_red"; label = "power_red";
gpios = <&pioA 2 0>; gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
}; };
tx_green { tx_green {
label = "tx_green"; label = "tx_green";
gpios = <&pioC 19 0>; gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
}; };
tx_red { tx_red {
label = "tx_red"; label = "tx_red";
gpios = <&pioC 18 0>; gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -160,21 +160,21 @@ ...@@ -160,21 +160,21 @@
keyswitch_in { keyswitch_in {
label = "keyswitch_in"; label = "keyswitch_in";
gpios = <&pioB 1 0>; gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>; linux,code = <28>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
error_in { error_in {
label = "error_in"; label = "error_in";
gpios = <&pioB 2 0>; gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>; linux,code = <29>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
btn { btn {
label = "btn"; label = "btn";
gpios = <&pioC 23 0>; gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>; linux,code = <31>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/at91-ariag25.dts
浏览文件 @ 1247034e
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g25.dtsi" #include "at91sam9g25.dtsi"
/ { / {
model = "Acme Systems Aria G25"; model = "Acme Systems Aria G25";
...@@ -156,7 +156,7 @@ ...@@ -156,7 +156,7 @@
/* little green LED in middle of Aria G25 module */ /* little green LED in middle of Aria G25 module */
aria_led { aria_led {
label = "aria_led"; label = "aria_led";
gpios = <&pioB 8 0>; /* PB8 */ gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
...@@ -164,7 +164,7 @@ ...@@ -164,7 +164,7 @@
onewire@0 { onewire@0 {
compatible = "w1-gpio"; compatible = "w1-gpio";
gpios = <&pioA 21 1>; gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_w1_0>; pinctrl-0 = <&pinctrl_w1_0>;
}; };
......
arch/arm/boot/dts/at91rm9200.dtsi
浏览文件 @ 1247034e
...@@ -10,7 +10,10 @@ ...@@ -10,7 +10,10 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "skeleton.dtsi" #include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Atmel AT91RM9200 family SoC"; model = "Atmel AT91RM9200 family SoC";
...@@ -77,25 +80,29 @@ ...@@ -77,25 +80,29 @@
st: timer@fffffd00 { st: timer@fffffd00 {
compatible = "atmel,at91rm9200-st"; compatible = "atmel,at91rm9200-st";
reg = <0xfffffd00 0x100>; reg = <0xfffffd00 0x100>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
}; };
tcb0: timer@fffa0000 { tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>; reg = <0xfffa0000 0x100>;
interrupts = <17 4 0 18 4 0 19 4 0>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
tcb1: timer@fffa4000 { tcb1: timer@fffa4000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa4000 0x100>; reg = <0xfffa4000 0x100>;
interrupts = <20 4 0 21 4 0 22 4 0>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
i2c0: i2c@fffb8000 { i2c0: i2c@fffb8000 {
compatible = "atmel,at91rm9200-i2c"; compatible = "atmel,at91rm9200-i2c";
reg = <0xfffb8000 0x4000>; reg = <0xfffb8000 0x4000>;
interrupts = <12 4 6>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>; pinctrl-0 = <&pinctrl_twi>;
#address-cells = <1>; #address-cells = <1>;
...@@ -106,7 +113,7 @@ ...@@ -106,7 +113,7 @@
mmc0: mmc@fffb4000 { mmc0: mmc@fffb4000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>; reg = <0xfffb4000 0x4000>;
interrupts = <10 4 0>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -115,7 +122,7 @@ ...@@ -115,7 +122,7 @@
ssc0: ssc@fffd0000 { ssc0: ssc@fffd0000 {
compatible = "atmel,at91rm9200-ssc"; compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd0000 0x4000>; reg = <0xfffd0000 0x4000>;
interrupts = <14 4 5>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disable"; status = "disable";
...@@ -124,7 +131,7 @@ ...@@ -124,7 +131,7 @@
ssc1: ssc@fffd4000 { ssc1: ssc@fffd4000 {
compatible = "atmel,at91rm9200-ssc"; compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd4000 0x4000>; reg = <0xfffd4000 0x4000>;
interrupts = <15 4 5>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disable"; status = "disable";
...@@ -133,7 +140,7 @@ ...@@ -133,7 +140,7 @@
ssc2: ssc@fffd8000 { ssc2: ssc@fffd8000 {
compatible = "atmel,at91rm9200-ssc"; compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd8000 0x4000>; reg = <0xfffd8000 0x4000>;
interrupts = <16 4 5>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
status = "disable"; status = "disable";
...@@ -142,7 +149,7 @@ ...@@ -142,7 +149,7 @@
macb0: ethernet@fffbc000 { macb0: ethernet@fffbc000 {
compatible = "cdns,at91rm9200-emac", "cdns,emac"; compatible = "cdns,at91rm9200-emac", "cdns,emac";
reg = <0xfffbc000 0x4000>; reg = <0xfffbc000 0x4000>;
interrupts = <24 4 3>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
phy-mode = "rmii"; phy-mode = "rmii";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>; pinctrl-0 = <&pinctrl_macb_rmii>;
...@@ -167,234 +174,234 @@ ...@@ -167,234 +174,234 @@
dbgu { dbgu {
pinctrl_dbgu: dbgu-0 { pinctrl_dbgu: dbgu-0 {
atmel,pins = atmel,pins =
<0 30 0x1 0x0 /* PA30 periph A */ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */
0 31 0x1 0x1>; /* PA31 periph with pullup */ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */
}; };
}; };
uart0 { uart0 {
pinctrl_uart0: uart0-0 { pinctrl_uart0: uart0-0 {
atmel,pins = atmel,pins =
<0 17 0x1 0x0 /* PA17 periph A */ <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
0 18 0x1 0x0>; /* PA18 periph A */ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */
}; };
pinctrl_uart0_rts: uart0_rts-0 { pinctrl_uart0_rts: uart0_rts-0 {
atmel,pins = atmel,pins =
<0 20 0x1 0x0>; /* PA20 periph A */ <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */
}; };
pinctrl_uart0_cts: uart0_cts-0 { pinctrl_uart0_cts: uart0_cts-0 {
atmel,pins = atmel,pins =
<0 21 0x1 0x0>; /* PA21 periph A */ <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
}; };
}; };
uart1 { uart1 {
pinctrl_uart1: uart1-0 { pinctrl_uart1: uart1-0 {
atmel,pins = atmel,pins =
<1 20 0x1 0x1 /* PB20 periph A with pullup */ <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */
1 21 0x1 0x0>; /* PB21 periph A */ AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */
}; };
pinctrl_uart1_rts: uart1_rts-0 { pinctrl_uart1_rts: uart1_rts-0 {
atmel,pins = atmel,pins =
<1 24 0x1 0x0>; /* PB24 periph A */ <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */
}; };
pinctrl_uart1_cts: uart1_cts-0 { pinctrl_uart1_cts: uart1_cts-0 {
atmel,pins = atmel,pins =
<1 26 0x1 0x0>; /* PB26 periph A */ <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
}; };
pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
atmel,pins = atmel,pins =
<1 19 0x1 0x0 /* PB19 periph A */ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */
1 25 0x1 0x0>; /* PB25 periph A */ AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */
}; };
pinctrl_uart1_dcd: uart1_dcd-0 { pinctrl_uart1_dcd: uart1_dcd-0 {
atmel,pins = atmel,pins =
<1 23 0x1 0x0>; /* PB23 periph A */ <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
}; };
pinctrl_uart1_ri: uart1_ri-0 { pinctrl_uart1_ri: uart1_ri-0 {
atmel,pins = atmel,pins =
<1 18 0x1 0x0>; /* PB18 periph A */ <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
}; };
}; };
uart2 { uart2 {
pinctrl_uart2: uart2-0 { pinctrl_uart2: uart2-0 {
atmel,pins = atmel,pins =
<0 22 0x1 0x0 /* PA22 periph A */ <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */
0 23 0x1 0x1>; /* PA23 periph A with pullup */ AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */
}; };
pinctrl_uart2_rts: uart2_rts-0 { pinctrl_uart2_rts: uart2_rts-0 {
atmel,pins = atmel,pins =
<0 30 0x2 0x0>; /* PA30 periph B */ <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
}; };
pinctrl_uart2_cts: uart2_cts-0 { pinctrl_uart2_cts: uart2_cts-0 {
atmel,pins = atmel,pins =
<0 31 0x2 0x0>; /* PA31 periph B */ <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */
}; };
}; };
uart3 { uart3 {
pinctrl_uart3: uart3-0 { pinctrl_uart3: uart3-0 {
atmel,pins = atmel,pins =
<0 5 0x2 0x1 /* PA5 periph B with pullup */ <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
0 6 0x2 0x0>; /* PA6 periph B */ AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */
}; };
pinctrl_uart3_rts: uart3_rts-0 { pinctrl_uart3_rts: uart3_rts-0 {
atmel,pins = atmel,pins =
<1 0 0x2 0x0>; /* PB0 periph B */ <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
}; };
pinctrl_uart3_cts: uart3_cts-0 { pinctrl_uart3_cts: uart3_cts-0 {
atmel,pins = atmel,pins =
<1 1 0x2 0x0>; /* PB1 periph B */ <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
}; };
}; };
nand { nand {
pinctrl_nand: nand-0 { pinctrl_nand: nand-0 {
atmel,pins = atmel,pins =
<2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */
1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */
}; };
}; };
macb { macb {
pinctrl_macb_rmii: macb_rmii-0 { pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins = atmel,pins =
<0 7 0x1 0x0 /* PA7 periph A */ <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */
0 8 0x1 0x0 /* PA8 periph A */ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */
0 9 0x1 0x0 /* PA9 periph A */ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
0 10 0x1 0x0 /* PA10 periph A */ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */
0 11 0x1 0x0 /* PA11 periph A */ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */
0 12 0x1 0x0 /* PA12 periph A */ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */
0 13 0x1 0x0 /* PA13 periph A */ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */
0 14 0x1 0x0 /* PA14 periph A */ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */
0 15 0x1 0x0 /* PA15 periph A */ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */
0 16 0x1 0x0>; /* PA16 periph A */ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */
}; };
pinctrl_macb_rmii_mii: macb_rmii_mii-0 { pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins = atmel,pins =
<1 12 0x2 0x0 /* PB12 periph B */ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */
1 13 0x2 0x0 /* PB13 periph B */ AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */
1 14 0x2 0x0 /* PB14 periph B */ AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */
1 15 0x2 0x0 /* PB15 periph B */ AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */
1 16 0x2 0x0 /* PB16 periph B */ AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */
1 17 0x2 0x0 /* PB17 periph B */ AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */
1 18 0x2 0x0 /* PB18 periph B */ AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */
1 19 0x2 0x0>; /* PB19 periph B */ AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */
}; };
}; };
mmc0 { mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 { pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins = atmel,pins =
<0 27 0x1 0x0>; /* PA27 periph A */ <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */
}; };
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 28 0x1 0x1 /* PA28 periph A with pullup */ <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */
0 29 0x1 0x1>; /* PA29 periph A with pullup */ AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<1 3 0x2 0x1 /* PB3 periph B with pullup */ <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */
1 4 0x2 0x1 /* PB4 periph B with pullup */ AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */
1 5 0x2 0x1>; /* PB5 periph B with pullup */ AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */
}; };
pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 8 0x2 0x1 /* PA8 periph B with pullup */ <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */
0 9 0x2 0x1>; /* PA9 periph B with pullup */ AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */
}; };
pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
atmel,pins = atmel,pins =
<0 10 0x2 0x1 /* PA10 periph B with pullup */ <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */
0 11 0x2 0x1 /* PA11 periph B with pullup */ AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */
0 12 0x2 0x1>; /* PA12 periph B with pullup */ AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */
}; };
}; };
ssc0 { ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 { pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins = atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A */ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
1 1 0x1 0x0 /* PB1 periph A */ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
1 2 0x1 0x0>; /* PB2 periph A */ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */
}; };
pinctrl_ssc0_rx: ssc0_rx-0 { pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins = atmel,pins =
<1 3 0x1 0x0 /* PB3 periph A */ <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
1 4 0x1 0x0 /* PB4 periph A */ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
1 5 0x1 0x0>; /* PB5 periph A */ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */
}; };
}; };
ssc1 { ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 { pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins = atmel,pins =
<1 6 0x1 0x0 /* PB6 periph A */ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
1 7 0x1 0x0 /* PB7 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
1 8 0x1 0x0>; /* PB8 periph A */ AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */
}; };
pinctrl_ssc1_rx: ssc1_rx-0 { pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins = atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A */ <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
1 10 0x1 0x0 /* PB10 periph A */ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */
1 11 0x1 0x0>; /* PB11 periph A */ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
}; };
}; };
ssc2 { ssc2 {
pinctrl_ssc2_tx: ssc2_tx-0 { pinctrl_ssc2_tx: ssc2_tx-0 {
atmel,pins = atmel,pins =
<1 12 0x1 0x0 /* PB12 periph A */ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
1 13 0x1 0x0 /* PB13 periph A */ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
1 14 0x1 0x0>; /* PB14 periph A */ AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */
}; };
pinctrl_ssc2_rx: ssc2_rx-0 { pinctrl_ssc2_rx: ssc2_rx-0 {
atmel,pins = atmel,pins =
<1 15 0x1 0x0 /* PB15 periph A */ <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
1 16 0x1 0x0 /* PB16 periph A */ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
1 17 0x1 0x0>; /* PB17 periph A */ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
}; };
}; };
twi { twi {
pinctrl_twi: twi-0 { pinctrl_twi: twi-0 {
atmel,pins = atmel,pins =
<0 25 0x1 0x2 /* PA25 periph A with multi drive */ <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */
0 26 0x1 0x2>; /* PA26 periph A with multi drive */ AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */
}; };
pinctrl_twi_gpio: twi_gpio-0 { pinctrl_twi_gpio: twi_gpio-0 {
atmel,pins = atmel,pins =
<0 25 0x0 0x2 /* PA25 GPIO with multi drive */ <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */
0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */
}; };
}; };
pioA: gpio@fffff400 { pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>; reg = <0xfffff400 0x200>;
interrupts = <2 4 1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -404,7 +411,7 @@ ...@@ -404,7 +411,7 @@
pioB: gpio@fffff600 { pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>; reg = <0xfffff600 0x200>;
interrupts = <3 4 1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -414,7 +421,7 @@ ...@@ -414,7 +421,7 @@
pioC: gpio@fffff800 { pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>; reg = <0xfffff800 0x200>;
interrupts = <4 4 1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -424,7 +431,7 @@ ...@@ -424,7 +431,7 @@
pioD: gpio@fffffa00 { pioD: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>; reg = <0xfffffa00 0x200>;
interrupts = <5 4 1>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -435,7 +442,7 @@ ...@@ -435,7 +442,7 @@
dbgu: serial@fffff200 { dbgu: serial@fffff200 {
compatible = "atmel,at91rm9200-usart"; compatible = "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>; reg = <0xfffff200 0x200>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>; pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled"; status = "disabled";
...@@ -444,7 +451,7 @@ ...@@ -444,7 +451,7 @@
usart0: serial@fffc0000 { usart0: serial@fffc0000 {
compatible = "atmel,at91rm9200-usart"; compatible = "atmel,at91rm9200-usart";
reg = <0xfffc0000 0x200>; reg = <0xfffc0000 0x200>;
interrupts = <6 4 5>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -455,7 +462,7 @@ ...@@ -455,7 +462,7 @@
usart1: serial@fffc4000 { usart1: serial@fffc4000 {
compatible = "atmel,at91rm9200-usart"; compatible = "atmel,at91rm9200-usart";
reg = <0xfffc4000 0x200>; reg = <0xfffc4000 0x200>;
interrupts = <7 4 5>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -466,7 +473,7 @@ ...@@ -466,7 +473,7 @@
usart2: serial@fffc8000 { usart2: serial@fffc8000 {
compatible = "atmel,at91rm9200-usart"; compatible = "atmel,at91rm9200-usart";
reg = <0xfffc8000 0x200>; reg = <0xfffc8000 0x200>;
interrupts = <8 4 5>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -477,7 +484,7 @@ ...@@ -477,7 +484,7 @@
usart3: serial@fffcc000 { usart3: serial@fffcc000 {
compatible = "atmel,at91rm9200-usart"; compatible = "atmel,at91rm9200-usart";
reg = <0xfffcc000 0x200>; reg = <0xfffcc000 0x200>;
interrupts = <23 4 5>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -488,7 +495,7 @@ ...@@ -488,7 +495,7 @@
usb1: gadget@fffb0000 { usb1: gadget@fffb0000 {
compatible = "atmel,at91rm9200-udc"; compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>; reg = <0xfffb0000 0x4000>;
interrupts = <11 4 2>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
}; };
...@@ -503,9 +510,9 @@ ...@@ -503,9 +510,9 @@
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>; pinctrl-0 = <&pinctrl_nand>;
nand-ecc-mode = "soft"; nand-ecc-mode = "soft";
gpios = <&pioC 2 0 gpios = <&pioC 2 GPIO_ACTIVE_HIGH
0 0
&pioB 1 0 &pioB 1 GPIO_ACTIVE_HIGH
>; >;
status = "disabled"; status = "disabled";
}; };
...@@ -513,15 +520,15 @@ ...@@ -513,15 +520,15 @@
usb0: ohci@00300000 { usb0: ohci@00300000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>; reg = <0x00300000 0x100000>;
interrupts = <23 4 2>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
}; };
i2c@0 { i2c@0 {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
gpios = <&pioA 25 0 /* sda */ gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
&pioA 26 0 /* scl */ &pioA 26 GPIO_ACTIVE_HIGH /* scl */
>; >;
i2c-gpio,sda-open-drain; i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain; i2c-gpio,scl-open-drain;
......
arch/arm/boot/dts/at91rm9200ek.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2 only * Licensed under GPLv2 only
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91rm9200.dtsi" #include "at91rm9200.dtsi"
/ { / {
model = "Atmel AT91RM9200 evaluation kit"; model = "Atmel AT91RM9200 evaluation kit";
...@@ -50,7 +50,7 @@ ...@@ -50,7 +50,7 @@
}; };
usb1: gadget@fffb0000 { usb1: gadget@fffb0000 {
atmel,vbus-gpio = <&pioD 4 0>; atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
}; };
...@@ -66,19 +66,19 @@ ...@@ -66,19 +66,19 @@
ds2 { ds2 {
label = "green"; label = "green";
gpios = <&pioB 0 0x1>; gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0"; linux,default-trigger = "mmc0";
}; };
ds4 { ds4 {
label = "yellow"; label = "yellow";
gpios = <&pioB 1 0x1>; gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
ds6 { ds6 {
label = "red"; label = "red";
gpios = <&pioB 2 0x1>; gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
}; };
}; };
}; };
arch/arm/boot/dts/at91sam9260.dtsi
浏览文件 @ 1247034e
...@@ -8,7 +8,10 @@ ...@@ -8,7 +8,10 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "skeleton.dtsi" #include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Atmel AT91SAM9260 family SoC"; model = "Atmel AT91SAM9260 family SoC";
...@@ -84,19 +87,23 @@ ...@@ -84,19 +87,23 @@
pit: timer@fffffd30 { pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>; reg = <0xfffffd30 0xf>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
}; };
tcb0: timer@fffa0000 { tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>; reg = <0xfffa0000 0x100>;
interrupts = <17 4 0 18 4 0 19 4 0>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
tcb1: timer@fffdc000 { tcb1: timer@fffdc000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfffdc000 0x100>; reg = <0xfffdc000 0x100>;
interrupts = <26 4 0 27 4 0 28 4 0>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
27 IRQ_TYPE_LEVEL_HIGH 0
28 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
pinctrl@fffff400 { pinctrl@fffff400 {
...@@ -116,234 +123,234 @@ ...@@ -116,234 +123,234 @@
dbgu { dbgu {
pinctrl_dbgu: dbgu-0 { pinctrl_dbgu: dbgu-0 {
atmel,pins = atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A */ <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
1 15 0x1 0x1>; /* PB15 periph with pullup */ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */
}; };
}; };
usart0 { usart0 {
pinctrl_usart0: usart0-0 { pinctrl_usart0: usart0-0 {
atmel,pins = atmel,pins =
<1 4 0x1 0x0 /* PB4 periph A */ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
1 5 0x1 0x0>; /* PB5 periph A */ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */
}; };
pinctrl_usart0_rts: usart0_rts-0 { pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins = atmel,pins =
<1 26 0x1 0x0>; /* PB26 periph A */ <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
}; };
pinctrl_usart0_cts: usart0_cts-0 { pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins = atmel,pins =
<1 27 0x1 0x0>; /* PB27 periph A */ <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */
}; };
pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
atmel,pins = atmel,pins =
<1 24 0x1 0x0 /* PB24 periph A */ <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */
1 22 0x1 0x0>; /* PB22 periph A */ AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */
}; };
pinctrl_usart0_dcd: usart0_dcd-0 { pinctrl_usart0_dcd: usart0_dcd-0 {
atmel,pins = atmel,pins =
<1 23 0x1 0x0>; /* PB23 periph A */ <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
}; };
pinctrl_usart0_ri: usart0_ri-0 { pinctrl_usart0_ri: usart0_ri-0 {
atmel,pins = atmel,pins =
<1 25 0x1 0x0>; /* PB25 periph A */ <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */
}; };
}; };
usart1 { usart1 {
pinctrl_usart1: usart1-0 { pinctrl_usart1: usart1-0 {
atmel,pins = atmel,pins =
<1 6 0x1 0x1 /* PB6 periph A with pullup */ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
1 7 0x1 0x0>; /* PB7 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */
}; };
pinctrl_usart1_rts: usart1_rts-0 { pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins = atmel,pins =
<1 28 0x1 0x0>; /* PB28 periph A */ <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */
}; };
pinctrl_usart1_cts: usart1_cts-0 { pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins = atmel,pins =
<1 29 0x1 0x0>; /* PB29 periph A */ <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */
}; };
}; };
usart2 { usart2 {
pinctrl_usart2: usart2-0 { pinctrl_usart2: usart2-0 {
atmel,pins = atmel,pins =
<1 8 0x1 0x1 /* PB8 periph A with pullup */ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */
1 9 0x1 0x0>; /* PB9 periph A */ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */
}; };
pinctrl_usart2_rts: usart2_rts-0 { pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins = atmel,pins =
<0 4 0x1 0x0>; /* PA4 periph A */ <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */
}; };
pinctrl_usart2_cts: usart2_cts-0 { pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins = atmel,pins =
<0 5 0x1 0x0>; /* PA5 periph A */ <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */
}; };
}; };
usart3 { usart3 {
pinctrl_usart3: usart3-0 { pinctrl_usart3: usart3-0 {
atmel,pins = atmel,pins =
<1 10 0x1 0x1 /* PB10 periph A with pullup */ <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */
1 11 0x1 0x0>; /* PB11 periph A */ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
}; };
pinctrl_usart3_rts: usart3_rts-0 { pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins = atmel,pins =
<2 8 0x2 0x0>; /* PC8 periph B */ <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
}; };
pinctrl_usart3_cts: usart3_cts-0 { pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins = atmel,pins =
<2 10 0x2 0x0>; /* PC10 periph B */ <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
}; };
}; };
uart0 { uart0 {
pinctrl_uart0: uart0-0 { pinctrl_uart0: uart0-0 {
atmel,pins = atmel,pins =
<0 31 0x2 0x1 /* PA31 periph B with pullup */ <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */
0 30 0x2 0x0>; /* PA30 periph B */ AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
}; };
}; };
uart1 { uart1 {
pinctrl_uart1: uart1-0 { pinctrl_uart1: uart1-0 {
atmel,pins = atmel,pins =
<1 12 0x1 0x1 /* PB12 periph A with pullup */ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */
1 13 0x1 0x0>; /* PB13 periph A */ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
}; };
}; };
nand { nand {
pinctrl_nand: nand-0 { pinctrl_nand: nand-0 {
atmel,pins = atmel,pins =
<2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */
2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */
}; };
}; };
macb { macb {
pinctrl_macb_rmii: macb_rmii-0 { pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins = atmel,pins =
<0 12 0x1 0x0 /* PA12 periph A */ <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */
0 13 0x1 0x0 /* PA13 periph A */ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */
0 14 0x1 0x0 /* PA14 periph A */ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */
0 15 0x1 0x0 /* PA15 periph A */ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */
0 16 0x1 0x0 /* PA16 periph A */ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */
0 17 0x1 0x0 /* PA17 periph A */ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
0 18 0x1 0x0 /* PA18 periph A */ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */
0 19 0x1 0x0 /* PA19 periph A */ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */
0 20 0x1 0x0 /* PA20 periph A */ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */
0 21 0x1 0x0>; /* PA21 periph A */ AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
}; };
pinctrl_macb_rmii_mii: macb_rmii_mii-0 { pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins = atmel,pins =
<0 22 0x2 0x0 /* PA22 periph B */ <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */
0 23 0x2 0x0 /* PA23 periph B */ AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */
0 24 0x2 0x0 /* PA24 periph B */ AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */ AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
0 26 0x2 0x0 /* PA26 periph B */ AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */
0 27 0x2 0x0 /* PA27 periph B */ AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */ AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */ AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
}; };
pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
atmel,pins = atmel,pins =
<0 10 0x2 0x0 /* PA10 periph B */ <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */
0 11 0x2 0x0 /* PA11 periph B */ AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */
0 22 0x2 0x0 /* PA22 periph B */ AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */ AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
0 26 0x2 0x0 /* PA26 periph B */ AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */
0 27 0x2 0x0 /* PA27 periph B */ AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */ AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */ AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
}; };
}; };
mmc0 { mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 { pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins = atmel,pins =
<0 8 0x1 0x0>; /* PA8 periph A */ <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */
}; };
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 7 0x1 0x1 /* PA7 periph A with pullup */ <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
0 6 0x1 0x1>; /* PA6 periph A with pullup */ AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<0 9 0x1 0x1 /* PA9 periph A with pullup */ <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
0 10 0x1 0x1 /* PA10 periph A with pullup */ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */
0 11 0x1 0x1>; /* PA11 periph A with pullup */ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */
}; };
pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 1 0x2 0x1 /* PA1 periph B with pullup */ <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */
0 0 0x2 0x1>; /* PA0 periph B with pullup */ AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */
}; };
pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
atmel,pins = atmel,pins =
<0 5 0x2 0x1 /* PA5 periph B with pullup */ <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
0 4 0x2 0x1 /* PA4 periph B with pullup */ AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */
0 3 0x2 0x1>; /* PA3 periph B with pullup */ AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */
}; };
}; };
ssc0 { ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 { pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins = atmel,pins =
<1 16 0x1 0x0 /* PB16 periph A */ <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
1 17 0x1 0x0 /* PB17 periph A */ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */
1 18 0x1 0x0>; /* PB18 periph A */ AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
}; };
pinctrl_ssc0_rx: ssc0_rx-0 { pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins = atmel,pins =
<1 19 0x1 0x0 /* PB19 periph A */ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */
1 20 0x1 0x0 /* PB20 periph A */ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */
1 21 0x1 0x0>; /* PB21 periph A */ AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */
}; };
}; };
spi0 { spi0 {
pinctrl_spi0: spi0-0 { pinctrl_spi0: spi0-0 {
atmel,pins = atmel,pins =
<0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */
0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */
0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */
}; };
}; };
spi1 { spi1 {
pinctrl_spi1: spi1-0 { pinctrl_spi1: spi1-0 {
atmel,pins = atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */
1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */
1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */
}; };
}; };
pioA: gpio@fffff400 { pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>; reg = <0xfffff400 0x200>;
interrupts = <2 4 1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -353,7 +360,7 @@ ...@@ -353,7 +360,7 @@
pioB: gpio@fffff600 { pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>; reg = <0xfffff600 0x200>;
interrupts = <3 4 1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -363,7 +370,7 @@ ...@@ -363,7 +370,7 @@
pioC: gpio@fffff800 { pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>; reg = <0xfffff800 0x200>;
interrupts = <4 4 1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -374,7 +381,7 @@ ...@@ -374,7 +381,7 @@
dbgu: serial@fffff200 { dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>; reg = <0xfffff200 0x200>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>; pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled"; status = "disabled";
...@@ -383,7 +390,7 @@ ...@@ -383,7 +390,7 @@
usart0: serial@fffb0000 { usart0: serial@fffb0000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffb0000 0x200>; reg = <0xfffb0000 0x200>;
interrupts = <6 4 5>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -394,7 +401,7 @@ ...@@ -394,7 +401,7 @@
usart1: serial@fffb4000 { usart1: serial@fffb4000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffb4000 0x200>; reg = <0xfffb4000 0x200>;
interrupts = <7 4 5>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -405,7 +412,7 @@ ...@@ -405,7 +412,7 @@
usart2: serial@fffb8000 { usart2: serial@fffb8000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffb8000 0x200>; reg = <0xfffb8000 0x200>;
interrupts = <8 4 5>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -416,7 +423,7 @@ ...@@ -416,7 +423,7 @@
usart3: serial@fffd0000 { usart3: serial@fffd0000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffd0000 0x200>; reg = <0xfffd0000 0x200>;
interrupts = <23 4 5>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -427,7 +434,7 @@ ...@@ -427,7 +434,7 @@
uart0: serial@fffd4000 { uart0: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>; reg = <0xfffd4000 0x200>;
interrupts = <24 4 5>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -438,7 +445,7 @@ ...@@ -438,7 +445,7 @@
uart1: serial@fffd8000 { uart1: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>; reg = <0xfffd8000 0x200>;
interrupts = <25 4 5>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -449,7 +456,7 @@ ...@@ -449,7 +456,7 @@
macb0: ethernet@fffc4000 { macb0: ethernet@fffc4000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb"; compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>; reg = <0xfffc4000 0x100>;
interrupts = <21 4 3>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>; pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled"; status = "disabled";
...@@ -458,14 +465,14 @@ ...@@ -458,14 +465,14 @@
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc"; compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>; reg = <0xfffa4000 0x4000>;
interrupts = <10 4 2>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
i2c0: i2c@fffac000 { i2c0: i2c@fffac000 {
compatible = "atmel,at91sam9260-i2c"; compatible = "atmel,at91sam9260-i2c";
reg = <0xfffac000 0x100>; reg = <0xfffac000 0x100>;
interrupts = <11 4 6>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -474,7 +481,7 @@ ...@@ -474,7 +481,7 @@
mmc0: mmc@fffa8000 { mmc0: mmc@fffa8000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xfffa8000 0x600>; reg = <0xfffa8000 0x600>;
interrupts = <9 4 0>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -483,7 +490,7 @@ ...@@ -483,7 +490,7 @@
ssc0: ssc@fffbc000 { ssc0: ssc@fffbc000 {
compatible = "atmel,at91rm9200-ssc"; compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>; reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled"; status = "disabled";
...@@ -494,7 +501,7 @@ ...@@ -494,7 +501,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "atmel,at91rm9200-spi"; compatible = "atmel,at91rm9200-spi";
reg = <0xfffc8000 0x200>; reg = <0xfffc8000 0x200>;
interrupts = <12 4 3>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>; pinctrl-0 = <&pinctrl_spi0>;
status = "disabled"; status = "disabled";
...@@ -505,7 +512,7 @@ ...@@ -505,7 +512,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "atmel,at91rm9200-spi"; compatible = "atmel,at91rm9200-spi";
reg = <0xfffcc000 0x200>; reg = <0xfffcc000 0x200>;
interrupts = <13 4 3>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
status = "disabled"; status = "disabled";
...@@ -514,7 +521,7 @@ ...@@ -514,7 +521,7 @@
adc0: adc@fffe0000 { adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc"; compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>; reg = <0xfffe0000 0x100>;
interrupts = <5 4 0>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
atmel,adc-use-external-triggers; atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xf>; atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>; atmel,adc-vref = <3300>;
...@@ -567,8 +574,8 @@ ...@@ -567,8 +574,8 @@
atmel,nand-cmd-offset = <22>; atmel,nand-cmd-offset = <22>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>; pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 13 0 gpios = <&pioC 13 GPIO_ACTIVE_HIGH
&pioC 14 0 &pioC 14 GPIO_ACTIVE_HIGH
0 0
>; >;
status = "disabled"; status = "disabled";
...@@ -577,15 +584,15 @@ ...@@ -577,15 +584,15 @@
usb0: ohci@00500000 { usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>; reg = <0x00500000 0x100000>;
interrupts = <20 4 2>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
}; };
i2c@0 { i2c@0 {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
gpios = <&pioA 23 0 /* sda */ gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
&pioA 24 0 /* scl */ &pioA 24 GPIO_ACTIVE_HIGH /* scl */
>; >;
i2c-gpio,sda-open-drain; i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain; i2c-gpio,scl-open-drain;
......
arch/arm/boot/dts/at91sam9263.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,10 @@ ...@@ -6,7 +6,10 @@
* Licensed under GPLv2 only. * Licensed under GPLv2 only.
*/ */
/include/ "skeleton.dtsi" #include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Atmel AT91SAM9263 family SoC"; model = "Atmel AT91SAM9263 family SoC";
...@@ -72,13 +75,13 @@ ...@@ -72,13 +75,13 @@
pit: timer@fffffd30 { pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>; reg = <0xfffffd30 0xf>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
}; };
tcb0: timer@fff7c000 { tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>; reg = <0xfff7c000 0x100>;
interrupts = <19 4 0>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
rstc@fffffd00 { rstc@fffffd00 {
...@@ -110,221 +113,221 @@ ...@@ -110,221 +113,221 @@
dbgu { dbgu {
pinctrl_dbgu: dbgu-0 { pinctrl_dbgu: dbgu-0 {
atmel,pins = atmel,pins =
<2 30 0x1 0x0 /* PC30 periph A */ <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */
2 31 0x1 0x1>; /* PC31 periph with pullup */ AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */
}; };
}; };
usart0 { usart0 {
pinctrl_usart0: usart0-0 { pinctrl_usart0: usart0-0 {
atmel,pins = atmel,pins =
<0 26 0x1 0x1 /* PA26 periph A with pullup */ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */
0 27 0x1 0x0>; /* PA27 periph A */ AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */
}; };
pinctrl_usart0_rts: usart0_rts-0 { pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins = atmel,pins =
<0 28 0x1 0x0>; /* PA28 periph A */ <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */
}; };
pinctrl_usart0_cts: usart0_cts-0 { pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins = atmel,pins =
<0 29 0x1 0x0>; /* PA29 periph A */ <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */
}; };
}; };
usart1 { usart1 {
pinctrl_usart1: usart1-0 { pinctrl_usart1: usart1-0 {
atmel,pins = atmel,pins =
<3 0 0x1 0x1 /* PD0 periph A with pullup */ <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */
3 1 0x1 0x0>; /* PD1 periph A */ AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */
}; };
pinctrl_usart1_rts: usart1_rts-0 { pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins = atmel,pins =
<3 7 0x2 0x0>; /* PD7 periph B */ <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */
}; };
pinctrl_usart1_cts: usart1_cts-0 { pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins = atmel,pins =
<3 8 0x2 0x0>; /* PD8 periph B */ <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */
}; };
}; };
usart2 { usart2 {
pinctrl_usart2: usart2-0 { pinctrl_usart2: usart2-0 {
atmel,pins = atmel,pins =
<3 2 0x1 0x1 /* PD2 periph A with pullup */ <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */
3 3 0x1 0x0>; /* PD3 periph A */ AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */
}; };
pinctrl_usart2_rts: usart2_rts-0 { pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins = atmel,pins =
<3 5 0x2 0x0>; /* PD5 periph B */ <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */
}; };
pinctrl_usart2_cts: usart2_cts-0 { pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins = atmel,pins =
<4 6 0x2 0x0>; /* PD6 periph B */ <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */
}; };
}; };
nand { nand {
pinctrl_nand: nand-0 { pinctrl_nand: nand-0 {
atmel,pins = atmel,pins =
<0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/
3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */
}; };
}; };
macb { macb {
pinctrl_macb_rmii: macb_rmii-0 { pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins = atmel,pins =
<2 25 0x2 0x0 /* PC25 periph B */ <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */
4 21 0x1 0x0 /* PE21 periph A */ AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */
4 23 0x1 0x0 /* PE23 periph A */ AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */
4 24 0x1 0x0 /* PE24 periph A */ AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */
4 25 0x1 0x0 /* PE25 periph A */ AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */
4 26 0x1 0x0 /* PE26 periph A */ AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */
4 27 0x1 0x0 /* PE27 periph A */ AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */
4 28 0x1 0x0 /* PE28 periph A */ AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */
4 29 0x1 0x0 /* PE29 periph A */ AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */
4 30 0x1 0x0>; /* PE30 periph A */ AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
}; };
pinctrl_macb_rmii_mii: macb_rmii_mii-0 { pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins = atmel,pins =
<2 20 0x2 0x0 /* PC20 periph B */ <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
2 21 0x2 0x0 /* PC21 periph B */ AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
2 22 0x2 0x0 /* PC22 periph B */ AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */
2 23 0x2 0x0 /* PC23 periph B */ AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */
2 24 0x2 0x0 /* PC24 periph B */ AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */
2 25 0x2 0x0 /* PC25 periph B */ AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */
2 27 0x2 0x0 /* PC27 periph B */ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
4 22 0x2 0x0>; /* PE22 periph B */ AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */
}; };
}; };
mmc0 { mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 { pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins = atmel,pins =
<0 12 0x1 0x0>; /* PA12 periph A */ <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */
}; };
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 1 0x1 0x1 /* PA1 periph A with pullup */ <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
0 0 0x1 0x1>; /* PA0 periph A with pullup */ AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<0 3 0x1 0x1 /* PA3 periph A with pullup */ <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
0 4 0x1 0x1 /* PA4 periph A with pullup */ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
0 5 0x1 0x1>; /* PA5 periph A with pullup */ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */
}; };
pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 16 0x1 0x1 /* PA16 periph A with pullup */ <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */
0 17 0x1 0x1>; /* PA17 periph A with pullup */ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */
}; };
pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
atmel,pins = atmel,pins =
<0 18 0x1 0x1 /* PA18 periph A with pullup */ <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */
0 19 0x1 0x1 /* PA19 periph A with pullup */ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */
0 20 0x1 0x1>; /* PA20 periph A with pullup */ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */
}; };
}; };
mmc1 { mmc1 {
pinctrl_mmc1_clk: mmc1_clk-0 { pinctrl_mmc1_clk: mmc1_clk-0 {
atmel,pins = atmel,pins =
<0 6 0x1 0x0>; /* PA6 periph A */ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */
}; };
pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 7 0x1 0x1 /* PA7 periph A with pullup */ <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
0 8 0x1 0x1>; /* PA8 periph A with pullup */ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */
}; };
pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<0 9 0x1 0x1 /* PA9 periph A with pullup */ <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
0 10 0x1 0x1 /* PA10 periph A with pullup */ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */
0 11 0x1 0x1>; /* PA11 periph A with pullup */ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */
}; };
pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 21 0x1 0x1 /* PA21 periph A with pullup */ <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */
0 22 0x1 0x1>; /* PA22 periph A with pullup */ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */
}; };
pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
atmel,pins = atmel,pins =
<0 23 0x1 0x1 /* PA23 periph A with pullup */ <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */
0 24 0x1 0x1 /* PA24 periph A with pullup */ AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */
0 25 0x1 0x1>; /* PA25 periph A with pullup */ AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */
}; };
}; };
ssc0 { ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 { pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins = atmel,pins =
<1 0 0x2 0x0 /* PB0 periph B */ <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */
1 1 0x2 0x0 /* PB1 periph B */ AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */
1 2 0x2 0x0>; /* PB2 periph B */ AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */
}; };
pinctrl_ssc0_rx: ssc0_rx-0 { pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins = atmel,pins =
<1 3 0x2 0x0 /* PB3 periph B */ <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */
1 4 0x2 0x0 /* PB4 periph B */ AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */
1 5 0x2 0x0>; /* PB5 periph B */ AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */
}; };
}; };
ssc1 { ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 { pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins = atmel,pins =
<1 6 0x1 0x0 /* PB6 periph A */ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
1 7 0x1 0x0 /* PB7 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
1 8 0x1 0x0>; /* PB8 periph A */ AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */
}; };
pinctrl_ssc1_rx: ssc1_rx-0 { pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins = atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A */ <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
1 10 0x1 0x0 /* PB10 periph A */ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */
1 11 0x1 0x0>; /* PB11 periph A */ AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
}; };
}; };
spi0 { spi0 {
pinctrl_spi0: spi0-0 { pinctrl_spi0: spi0-0 {
atmel,pins = atmel,pins =
<0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */
0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */
0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */
}; };
}; };
spi1 { spi1 {
pinctrl_spi1: spi1-0 { pinctrl_spi1: spi1-0 {
atmel,pins = atmel,pins =
<1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */
1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */
1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */
}; };
}; };
pioA: gpio@fffff200 { pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>; reg = <0xfffff200 0x200>;
interrupts = <2 4 1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -334,7 +337,7 @@ ...@@ -334,7 +337,7 @@
pioB: gpio@fffff400 { pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>; reg = <0xfffff400 0x200>;
interrupts = <3 4 1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -344,7 +347,7 @@ ...@@ -344,7 +347,7 @@
pioC: gpio@fffff600 { pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>; reg = <0xfffff600 0x200>;
interrupts = <4 4 1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -354,7 +357,7 @@ ...@@ -354,7 +357,7 @@
pioD: gpio@fffff800 { pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>; reg = <0xfffff800 0x200>;
interrupts = <4 4 1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -364,7 +367,7 @@ ...@@ -364,7 +367,7 @@
pioE: gpio@fffffa00 { pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>; reg = <0xfffffa00 0x200>;
interrupts = <4 4 1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -375,7 +378,7 @@ ...@@ -375,7 +378,7 @@
dbgu: serial@ffffee00 { dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>; reg = <0xffffee00 0x200>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>; pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled"; status = "disabled";
...@@ -384,7 +387,7 @@ ...@@ -384,7 +387,7 @@
usart0: serial@fff8c000 { usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>; reg = <0xfff8c000 0x200>;
interrupts = <7 4 5>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -395,7 +398,7 @@ ...@@ -395,7 +398,7 @@
usart1: serial@fff90000 { usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>; reg = <0xfff90000 0x200>;
interrupts = <8 4 5>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -406,7 +409,7 @@ ...@@ -406,7 +409,7 @@
usart2: serial@fff94000 { usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>; reg = <0xfff94000 0x200>;
interrupts = <9 4 5>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -417,7 +420,7 @@ ...@@ -417,7 +420,7 @@
ssc0: ssc@fff98000 { ssc0: ssc@fff98000 {
compatible = "atmel,at91rm9200-ssc"; compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>; reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled"; status = "disabled";
...@@ -426,7 +429,7 @@ ...@@ -426,7 +429,7 @@
ssc1: ssc@fff9c000 { ssc1: ssc@fff9c000 {
compatible = "atmel,at91rm9200-ssc"; compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>; reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled"; status = "disabled";
...@@ -435,7 +438,7 @@ ...@@ -435,7 +438,7 @@
macb0: ethernet@fffbc000 { macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb"; compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>; reg = <0xfffbc000 0x100>;
interrupts = <21 4 3>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>; pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled"; status = "disabled";
...@@ -444,14 +447,14 @@ ...@@ -444,14 +447,14 @@
usb1: gadget@fff78000 { usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc"; compatible = "atmel,at91rm9200-udc";
reg = <0xfff78000 0x4000>; reg = <0xfff78000 0x4000>;
interrupts = <24 4 2>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
i2c0: i2c@fff88000 { i2c0: i2c@fff88000 {
compatible = "atmel,at91sam9263-i2c"; compatible = "atmel,at91sam9263-i2c";
reg = <0xfff88000 0x100>; reg = <0xfff88000 0x100>;
interrupts = <13 4 6>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -460,7 +463,7 @@ ...@@ -460,7 +463,7 @@
mmc0: mmc@fff80000 { mmc0: mmc@fff80000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>; reg = <0xfff80000 0x600>;
interrupts = <10 4 0>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -469,7 +472,7 @@ ...@@ -469,7 +472,7 @@
mmc1: mmc@fff84000 { mmc1: mmc@fff84000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xfff84000 0x600>; reg = <0xfff84000 0x600>;
interrupts = <11 4 0>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -486,7 +489,7 @@ ...@@ -486,7 +489,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "atmel,at91rm9200-spi"; compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>; reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>; pinctrl-0 = <&pinctrl_spi0>;
status = "disabled"; status = "disabled";
...@@ -497,7 +500,7 @@ ...@@ -497,7 +500,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "atmel,at91rm9200-spi"; compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>; reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
status = "disabled"; status = "disabled";
...@@ -515,8 +518,8 @@ ...@@ -515,8 +518,8 @@
atmel,nand-cmd-offset = <22>; atmel,nand-cmd-offset = <22>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>; pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioA 22 0 gpios = <&pioA 22 GPIO_ACTIVE_HIGH
&pioD 15 0 &pioD 15 GPIO_ACTIVE_HIGH
0 0
>; >;
status = "disabled"; status = "disabled";
...@@ -525,15 +528,15 @@ ...@@ -525,15 +528,15 @@
usb0: ohci@00a00000 { usb0: ohci@00a00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>; reg = <0x00a00000 0x100000>;
interrupts = <29 4 2>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
}; };
i2c@0 { i2c@0 {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
gpios = <&pioB 4 0 /* sda */ gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
&pioB 5 0 /* scl */ &pioB 5 GPIO_ACTIVE_HIGH /* scl */
>; >;
i2c-gpio,sda-open-drain; i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain; i2c-gpio,scl-open-drain;
......
arch/arm/boot/dts/at91sam9263ek.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2 only * Licensed under GPLv2 only
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9263.dtsi" #include "at91sam9263.dtsi"
/ { / {
model = "Atmel at91sam9263ek"; model = "Atmel at91sam9263ek";
...@@ -51,7 +51,7 @@ ...@@ -51,7 +51,7 @@
}; };
usb1: gadget@fff78000 { usb1: gadget@fff78000 {
atmel,vbus-gpio = <&pioA 25 0>; atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -65,8 +65,8 @@ ...@@ -65,8 +65,8 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioE 18 0>; cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
wp-gpios = <&pioE 19 0>; wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -74,8 +74,8 @@ ...@@ -74,8 +74,8 @@
mmc0 { mmc0 {
pinctrl_board_mmc0: mmc0-board { pinctrl_board_mmc0: mmc0-board {
atmel,pins = atmel,pins =
<5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */
5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */
}; };
}; };
}; };
...@@ -141,8 +141,8 @@ ...@@ -141,8 +141,8 @@
usb0: ohci@00a00000 { usb0: ohci@00a00000 {
num-ports = <2>; num-ports = <2>;
status = "okay"; status = "okay";
atmel,vbus-gpio = <&pioA 24 0 atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
&pioA 21 0 &pioA 21 GPIO_ACTIVE_HIGH
>; >;
}; };
}; };
...@@ -152,13 +152,13 @@ ...@@ -152,13 +152,13 @@
d3 { d3 {
label = "d3"; label = "d3";
gpios = <&pioB 7 0>; gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
d2 { d2 {
label = "d2"; label = "d2";
gpios = <&pioC 29 1>; gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk"; linux,default-trigger = "nand-disk";
}; };
}; };
...@@ -168,14 +168,14 @@ ...@@ -168,14 +168,14 @@
left_click { left_click {
label = "left_click"; label = "left_click";
gpios = <&pioC 5 1>; gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>; linux,code = <272>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
right_click { right_click {
label = "right_click"; label = "right_click";
gpios = <&pioC 4 1>; gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>; linux,code = <273>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/at91sam9g15.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9x5.dtsi" #include "at91sam9x5.dtsi"
/ { / {
model = "Atmel AT91SAM9G15 SoC"; model = "Atmel AT91SAM9G15 SoC";
......
arch/arm/boot/dts/at91sam9g15ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g15.dtsi" #include "at91sam9g15.dtsi"
/include/ "at91sam9x5ek.dtsi" #include "at91sam9x5ek.dtsi"
/ { / {
model = "Atmel AT91SAM9G15-EK"; model = "Atmel AT91SAM9G15-EK";
......
arch/arm/boot/dts/at91sam9g20.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9260.dtsi" #include "at91sam9260.dtsi"
/ { / {
model = "Atmel AT91SAM9G20 family SoC"; model = "Atmel AT91SAM9G20 family SoC";
......
arch/arm/boot/dts/at91sam9g20ek.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g20ek_common.dtsi" #include "at91sam9g20ek_common.dtsi"
/ { / {
model = "Atmel at91sam9g20ek"; model = "Atmel at91sam9g20ek";
...@@ -17,13 +17,13 @@ ...@@ -17,13 +17,13 @@
ds1 { ds1 {
label = "ds1"; label = "ds1";
gpios = <&pioA 9 0>; gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
ds5 { ds5 {
label = "ds5"; label = "ds5";
gpios = <&pioA 6 1>; gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
}; };
}; };
}; };
arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g20ek_common.dtsi" #include "at91sam9g20ek_common.dtsi"
/ { / {
model = "Atmel at91sam9g20ek 2 mmc"; model = "Atmel at91sam9g20ek 2 mmc";
...@@ -23,7 +23,7 @@ ...@@ -23,7 +23,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioC 2 0>; cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -31,7 +31,7 @@ ...@@ -31,7 +31,7 @@
mmc0_slot0 { mmc0_slot0 {
pinctrl_board_mmc0_slot0: mmc0_slot0-board { pinctrl_board_mmc0_slot0: mmc0_slot0-board {
atmel,pins = atmel,pins =
<2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */
}; };
}; };
}; };
...@@ -43,13 +43,13 @@ ...@@ -43,13 +43,13 @@
ds1 { ds1 {
label = "ds1"; label = "ds1";
gpios = <&pioB 9 0>; gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
ds5 { ds5 {
label = "ds5"; label = "ds5";
gpios = <&pioB 8 1>; gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
}; };
}; };
}; };
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
浏览文件 @ 1247034e
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
* *
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9g20.dtsi" #include "at91sam9g20.dtsi"
/ { / {
...@@ -34,10 +34,17 @@ ...@@ -34,10 +34,17 @@
board { board {
pinctrl_pck0_as_mck: pck0_as_mck { pinctrl_pck0_as_mck: pck0_as_mck {
atmel,pins = atmel,pins =
<2 1 0x2 0x0>; /* PC1 periph B */ <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */
}; };
}; };
mmc0_slot1 {
pinctrl_board_mmc0_slot1: mmc0_slot1-board {
atmel,pins =
<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */
};
};
}; };
dbgu: serial@fffff200 { dbgu: serial@fffff200 {
...@@ -65,7 +72,7 @@ ...@@ -65,7 +72,7 @@
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -79,16 +86,7 @@ ...@@ -79,16 +86,7 @@
slot@1 { slot@1 {
reg = <1>; reg = <1>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioC 9 0>; cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
};
};
pinctrl@fffff400 {
mmc0_slot1 {
pinctrl_board_mmc0_slot1: mmc0_slot1-board {
atmel,pins =
<2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */
};
}; };
}; };
...@@ -180,14 +178,14 @@ ...@@ -180,14 +178,14 @@
btn3 { btn3 {
label = "Button 3"; label = "Button 3";
gpios = <&pioA 30 1>; gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>; linux,code = <0x103>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
btn4 { btn4 {
label = "Button 4"; label = "Button 4";
gpios = <&pioA 31 1>; gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>; linux,code = <0x104>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/at91sam9g25.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9x5.dtsi" #include "at91sam9x5.dtsi"
/ { / {
model = "Atmel AT91SAM9G25 SoC"; model = "Atmel AT91SAM9G25 SoC";
......
arch/arm/boot/dts/at91sam9g25ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g25.dtsi" #include "at91sam9g25.dtsi"
/include/ "at91sam9x5ek.dtsi" #include "at91sam9x5ek.dtsi"
/ { / {
model = "Atmel AT91SAM9G25-EK"; model = "Atmel AT91SAM9G25-EK";
......
arch/arm/boot/dts/at91sam9g35.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9x5.dtsi" #include "at91sam9x5.dtsi"
/ { / {
model = "Atmel AT91SAM9G35 SoC"; model = "Atmel AT91SAM9G35 SoC";
......
arch/arm/boot/dts/at91sam9g35ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g35.dtsi" #include "at91sam9g35.dtsi"
/include/ "at91sam9x5ek.dtsi" #include "at91sam9x5ek.dtsi"
/ { / {
model = "Atmel AT91SAM9G35-EK"; model = "Atmel AT91SAM9G35-EK";
......
arch/arm/boot/dts/at91sam9g45.dtsi
浏览文件 @ 1247034e
...@@ -9,7 +9,10 @@ ...@@ -9,7 +9,10 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "skeleton.dtsi" #include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Atmel AT91SAM9G45 family SoC"; model = "Atmel AT91SAM9G45 family SoC";
...@@ -83,7 +86,7 @@ ...@@ -83,7 +86,7 @@
pit: timer@fffffd30 { pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>; reg = <0xfffffd30 0xf>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
}; };
...@@ -95,19 +98,19 @@ ...@@ -95,19 +98,19 @@
tcb0: timer@fff7c000 { tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>; reg = <0xfff7c000 0x100>;
interrupts = <18 4 0>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
tcb1: timer@fffd4000 { tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>; reg = <0xfffd4000 0x100>;
interrupts = <18 4 0>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
dma: dma-controller@ffffec00 { dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma"; compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>; reg = <0xffffec00 0x200>;
interrupts = <21 4 0>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>; #dma-cells = <2>;
}; };
...@@ -130,221 +133,221 @@ ...@@ -130,221 +133,221 @@
dbgu { dbgu {
pinctrl_dbgu: dbgu-0 { pinctrl_dbgu: dbgu-0 {
atmel,pins = atmel,pins =
<1 12 0x1 0x0 /* PB12 periph A */ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
1 13 0x1 0x0>; /* PB13 periph A */ AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
}; };
}; };
usart0 { usart0 {
pinctrl_usart0: usart0-0 { pinctrl_usart0: usart0-0 {
atmel,pins = atmel,pins =
<1 19 0x1 0x1 /* PB19 periph A with pullup */ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */
1 18 0x1 0x0>; /* PB18 periph A */ AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
}; };
pinctrl_usart0_rts: usart0_rts-0 { pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins = atmel,pins =
<1 17 0x2 0x0>; /* PB17 periph B */ <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */
}; };
pinctrl_usart0_cts: usart0_cts-0 { pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins = atmel,pins =
<1 15 0x2 0x0>; /* PB15 periph B */ <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */
}; };
}; };
uart1 { uart1 {
pinctrl_usart1: usart1-0 { pinctrl_usart1: usart1-0 {
atmel,pins = atmel,pins =
<1 4 0x1 0x1 /* PB4 periph A with pullup */ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */
1 5 0x1 0x0>; /* PB5 periph A */ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */
}; };
pinctrl_usart1_rts: usart1_rts-0 { pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins = atmel,pins =
<3 16 0x1 0x0>; /* PD16 periph A */ <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */
}; };
pinctrl_usart1_cts: usart1_cts-0 { pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins = atmel,pins =
<3 17 0x1 0x0>; /* PD17 periph A */ <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */
}; };
}; };
usart2 { usart2 {
pinctrl_usart2: usart2-0 { pinctrl_usart2: usart2-0 {
atmel,pins = atmel,pins =
<1 6 0x1 0x1 /* PB6 periph A with pullup */ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
1 7 0x1 0x0>; /* PB7 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */
}; };
pinctrl_usart2_rts: usart2_rts-0 { pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins = atmel,pins =
<2 9 0x2 0x0>; /* PC9 periph B */ <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */
}; };
pinctrl_usart2_cts: usart2_cts-0 { pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins = atmel,pins =
<2 11 0x2 0x0>; /* PC11 periph B */ <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */
}; };
}; };
usart3 { usart3 {
pinctrl_usart3: usart3-0 { pinctrl_usart3: usart3-0 {
atmel,pins = atmel,pins =
<1 8 0x1 0x1 /* PB9 periph A with pullup */ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */
1 9 0x1 0x0>; /* PB8 periph A */ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */
}; };
pinctrl_usart3_rts: usart3_rts-0 { pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins = atmel,pins =
<0 23 0x2 0x0>; /* PA23 periph B */ <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */
}; };
pinctrl_usart3_cts: usart3_cts-0 { pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins = atmel,pins =
<0 24 0x2 0x0>; /* PA24 periph B */ <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */
}; };
}; };
nand { nand {
pinctrl_nand: nand-0 { pinctrl_nand: nand-0 {
atmel,pins = atmel,pins =
<2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/
2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */
}; };
}; };
macb { macb {
pinctrl_macb_rmii: macb_rmii-0 { pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins = atmel,pins =
<0 10 0x1 0x0 /* PA10 periph A */ <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */
0 11 0x1 0x0 /* PA11 periph A */ AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */
0 12 0x1 0x0 /* PA12 periph A */ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */
0 13 0x1 0x0 /* PA13 periph A */ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */
0 14 0x1 0x0 /* PA14 periph A */ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */
0 15 0x1 0x0 /* PA15 periph A */ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */
0 16 0x1 0x0 /* PA16 periph A */ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */
0 17 0x1 0x0 /* PA17 periph A */ AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
0 18 0x1 0x0 /* PA18 periph A */ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */
0 19 0x1 0x0>; /* PA19 periph A */ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */
}; };
pinctrl_macb_rmii_mii: macb_rmii_mii-0 { pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins = atmel,pins =
<0 6 0x2 0x0 /* PA6 periph B */ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */
0 7 0x2 0x0 /* PA7 periph B */ AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */
0 8 0x2 0x0 /* PA8 periph B */ AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */
0 9 0x2 0x0 /* PA9 periph B */ AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */
0 27 0x2 0x0 /* PA27 periph B */ AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */ AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
0 29 0x2 0x0 /* PA29 periph B */ AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */
0 30 0x2 0x0>; /* PA30 periph B */ AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
}; };
}; };
mmc0 { mmc0 {
pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 0 0x1 0x0 /* PA0 periph A */ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */
0 1 0x1 0x1 /* PA1 periph A with pullup */ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
0 2 0x1 0x1>; /* PA2 periph A with pullup */ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<0 3 0x1 0x1 /* PA3 periph A with pullup */ <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
0 4 0x1 0x1 /* PA4 periph A with pullup */ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
0 5 0x1 0x1>; /* PA5 periph A with pullup */ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
atmel,pins = atmel,pins =
<0 6 0x1 0x1 /* PA6 periph A with pullup */ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */
0 7 0x1 0x1 /* PA7 periph A with pullup */ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
0 8 0x1 0x1 /* PA8 periph A with pullup */ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */
0 9 0x1 0x1>; /* PA9 periph A with pullup */ AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */
}; };
}; };
mmc1 { mmc1 {
pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 31 0x1 0x0 /* PA31 periph A */ <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */
0 22 0x1 0x1 /* PA22 periph A with pullup */ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */
0 23 0x1 0x1>; /* PA23 periph A with pullup */ AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */
}; };
pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<0 24 0x1 0x1 /* PA24 periph A with pullup */ <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */
0 25 0x1 0x1 /* PA25 periph A with pullup */ AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */
0 26 0x1 0x1>; /* PA26 periph A with pullup */ AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */
}; };
pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
atmel,pins = atmel,pins =
<0 27 0x1 0x1 /* PA27 periph A with pullup */ <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */
0 28 0x1 0x1 /* PA28 periph A with pullup */ AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */
0 29 0x1 0x1 /* PA29 periph A with pullup */ AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */
0 20 0x1 0x1>; /* PA30 periph A with pullup */ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */
}; };
}; };
ssc0 { ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 { pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins = atmel,pins =
<3 0 0x1 0x0 /* PD0 periph A */ <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */
3 1 0x1 0x0 /* PD1 periph A */ AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */
3 2 0x1 0x0>; /* PD2 periph A */ AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */
}; };
pinctrl_ssc0_rx: ssc0_rx-0 { pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins = atmel,pins =
<3 3 0x1 0x0 /* PD3 periph A */ <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */
3 4 0x1 0x0 /* PD4 periph A */ AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */
3 5 0x1 0x0>; /* PD5 periph A */ AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */
}; };
}; };
ssc1 { ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 { pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins = atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A */ <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */
3 11 0x1 0x0 /* PD11 periph A */ AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */
3 12 0x1 0x0>; /* PD12 periph A */ AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */
}; };
pinctrl_ssc1_rx: ssc1_rx-0 { pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins = atmel,pins =
<3 13 0x1 0x0 /* PD13 periph A */ <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */
3 14 0x1 0x0 /* PD14 periph A */ AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */
3 15 0x1 0x0>; /* PD15 periph A */ AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */
}; };
}; };
spi0 { spi0 {
pinctrl_spi0: spi0-0 { pinctrl_spi0: spi0-0 {
atmel,pins = atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */
1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */
1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */
}; };
}; };
spi1 { spi1 {
pinctrl_spi1: spi1-0 { pinctrl_spi1: spi1-0 {
atmel,pins = atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */
1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */
1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */
}; };
}; };
pioA: gpio@fffff200 { pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>; reg = <0xfffff200 0x200>;
interrupts = <2 4 1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -354,7 +357,7 @@ ...@@ -354,7 +357,7 @@
pioB: gpio@fffff400 { pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>; reg = <0xfffff400 0x200>;
interrupts = <3 4 1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -364,7 +367,7 @@ ...@@ -364,7 +367,7 @@
pioC: gpio@fffff600 { pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>; reg = <0xfffff600 0x200>;
interrupts = <4 4 1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -374,7 +377,7 @@ ...@@ -374,7 +377,7 @@
pioD: gpio@fffff800 { pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>; reg = <0xfffff800 0x200>;
interrupts = <5 4 1>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -384,7 +387,7 @@ ...@@ -384,7 +387,7 @@
pioE: gpio@fffffa00 { pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>; reg = <0xfffffa00 0x200>;
interrupts = <5 4 1>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -395,7 +398,7 @@ ...@@ -395,7 +398,7 @@
dbgu: serial@ffffee00 { dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>; reg = <0xffffee00 0x200>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>; pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled"; status = "disabled";
...@@ -404,7 +407,7 @@ ...@@ -404,7 +407,7 @@
usart0: serial@fff8c000 { usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>; reg = <0xfff8c000 0x200>;
interrupts = <7 4 5>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -415,7 +418,7 @@ ...@@ -415,7 +418,7 @@
usart1: serial@fff90000 { usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>; reg = <0xfff90000 0x200>;
interrupts = <8 4 5>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -426,7 +429,7 @@ ...@@ -426,7 +429,7 @@
usart2: serial@fff94000 { usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>; reg = <0xfff94000 0x200>;
interrupts = <9 4 5>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -437,7 +440,7 @@ ...@@ -437,7 +440,7 @@
usart3: serial@fff98000 { usart3: serial@fff98000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfff98000 0x200>; reg = <0xfff98000 0x200>;
interrupts = <10 4 5>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx; atmel,use-dma-rx;
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -448,7 +451,7 @@ ...@@ -448,7 +451,7 @@
macb0: ethernet@fffbc000 { macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb"; compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>; reg = <0xfffbc000 0x100>;
interrupts = <25 4 3>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>; pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled"; status = "disabled";
...@@ -457,7 +460,7 @@ ...@@ -457,7 +460,7 @@
i2c0: i2c@fff84000 { i2c0: i2c@fff84000 {
compatible = "atmel,at91sam9g10-i2c"; compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff84000 0x100>; reg = <0xfff84000 0x100>;
interrupts = <12 4 6>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -466,7 +469,7 @@ ...@@ -466,7 +469,7 @@
i2c1: i2c@fff88000 { i2c1: i2c@fff88000 {
compatible = "atmel,at91sam9g10-i2c"; compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff88000 0x100>; reg = <0xfff88000 0x100>;
interrupts = <13 4 6>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
...@@ -475,7 +478,7 @@ ...@@ -475,7 +478,7 @@
ssc0: ssc@fff9c000 { ssc0: ssc@fff9c000 {
compatible = "atmel,at91sam9g45-ssc"; compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>; reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled"; status = "disabled";
...@@ -484,7 +487,7 @@ ...@@ -484,7 +487,7 @@
ssc1: ssc@fffa0000 { ssc1: ssc@fffa0000 {
compatible = "atmel,at91sam9g45-ssc"; compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>; reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled"; status = "disabled";
...@@ -493,7 +496,7 @@ ...@@ -493,7 +496,7 @@
adc0: adc@fffb0000 { adc0: adc@fffb0000 {
compatible = "atmel,at91sam9260-adc"; compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>; reg = <0xfffb0000 0x100>;
interrupts = <20 4 0>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
atmel,adc-use-external-triggers; atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>; atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>; atmel,adc-vref = <3300>;
...@@ -533,7 +536,7 @@ ...@@ -533,7 +536,7 @@
mmc0: mmc@fff80000 { mmc0: mmc@fff80000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>; reg = <0xfff80000 0x600>;
interrupts = <11 4 0>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 0>; dmas = <&dma 1 0>;
dma-names = "rxtx"; dma-names = "rxtx";
#address-cells = <1>; #address-cells = <1>;
...@@ -544,7 +547,7 @@ ...@@ -544,7 +547,7 @@
mmc1: mmc@fffd0000 { mmc1: mmc@fffd0000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>; reg = <0xfffd0000 0x600>;
interrupts = <29 4 0>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 13>; dmas = <&dma 1 13>;
dma-names = "rxtx"; dma-names = "rxtx";
#address-cells = <1>; #address-cells = <1>;
...@@ -592,8 +595,8 @@ ...@@ -592,8 +595,8 @@
atmel,nand-cmd-offset = <22>; atmel,nand-cmd-offset = <22>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>; pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 8 0 gpios = <&pioC 8 GPIO_ACTIVE_HIGH
&pioC 14 0 &pioC 14 GPIO_ACTIVE_HIGH
0 0
>; >;
status = "disabled"; status = "disabled";
...@@ -602,22 +605,22 @@ ...@@ -602,22 +605,22 @@
usb0: ohci@00700000 { usb0: ohci@00700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>; reg = <0x00700000 0x100000>;
interrupts = <22 4 2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
usb1: ehci@00800000 { usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>; reg = <0x00800000 0x100000>;
interrupts = <22 4 2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
}; };
i2c@0 { i2c@0 {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
gpios = <&pioA 20 0 /* sda */ gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
&pioA 21 0 /* scl */ &pioA 21 GPIO_ACTIVE_HIGH /* scl */
>; >;
i2c-gpio,sda-open-drain; i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain; i2c-gpio,scl-open-drain;
......
arch/arm/boot/dts/at91sam9m10g45ek.dts
浏览文件 @ 1247034e
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g45.dtsi" #include "at91sam9g45.dtsi"
/ { / {
model = "Atmel AT91SAM9M10G45-EK"; model = "Atmel AT91SAM9M10G45-EK";
...@@ -68,7 +68,7 @@ ...@@ -68,7 +68,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 10 0>; cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -81,8 +81,8 @@ ...@@ -81,8 +81,8 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 11 0>; cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
wp-gpios = <&pioD 29 0>; wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -90,15 +90,15 @@ ...@@ -90,15 +90,15 @@
mmc0 { mmc0 {
pinctrl_board_mmc0: mmc0-board { pinctrl_board_mmc0: mmc0-board {
atmel,pins = atmel,pins =
<3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */
}; };
}; };
mmc1 { mmc1 {
pinctrl_board_mmc1: mmc1-board { pinctrl_board_mmc1: mmc1-board {
atmel,pins = atmel,pins =
<3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */
3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */
}; };
}; };
}; };
...@@ -139,8 +139,8 @@ ...@@ -139,8 +139,8 @@
usb0: ohci@00700000 { usb0: ohci@00700000 {
status = "okay"; status = "okay";
num-ports = <2>; num-ports = <2>;
atmel,vbus-gpio = <&pioD 1 1 atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
&pioD 3 1>; &pioD 3 GPIO_ACTIVE_LOW>;
}; };
usb1: ehci@00800000 { usb1: ehci@00800000 {
...@@ -153,19 +153,19 @@ ...@@ -153,19 +153,19 @@
d8 { d8 {
label = "d8"; label = "d8";
gpios = <&pioD 30 0>; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
d6 { d6 {
label = "d6"; label = "d6";
gpios = <&pioD 0 1>; gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk"; linux,default-trigger = "nand-disk";
}; };
d7 { d7 {
label = "d7"; label = "d7";
gpios = <&pioD 31 1>; gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0"; linux,default-trigger = "mmc0";
}; };
}; };
...@@ -175,45 +175,45 @@ ...@@ -175,45 +175,45 @@
left_click { left_click {
label = "left_click"; label = "left_click";
gpios = <&pioB 6 1>; gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>; linux,code = <272>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
right_click { right_click {
label = "right_click"; label = "right_click";
gpios = <&pioB 7 1>; gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>; linux,code = <273>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
left { left {
label = "Joystick Left"; label = "Joystick Left";
gpios = <&pioB 14 1>; gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
linux,code = <105>; linux,code = <105>;
}; };
right { right {
label = "Joystick Right"; label = "Joystick Right";
gpios = <&pioB 15 1>; gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
linux,code = <106>; linux,code = <106>;
}; };
up { up {
label = "Joystick Up"; label = "Joystick Up";
gpios = <&pioB 16 1>; gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
linux,code = <103>; linux,code = <103>;
}; };
down { down {
label = "Joystick Down"; label = "Joystick Down";
gpios = <&pioB 17 1>; gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
linux,code = <108>; linux,code = <108>;
}; };
enter { enter {
label = "Joystick Press"; label = "Joystick Press";
gpios = <&pioB 18 1>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,code = <28>; linux,code = <28>;
}; };
}; };
......
arch/arm/boot/dts/at91sam9n12.dtsi
浏览文件 @ 1247034e
...@@ -7,7 +7,10 @@ ...@@ -7,7 +7,10 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "skeleton.dtsi" #include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Atmel AT91SAM9N12 SoC"; model = "Atmel AT91SAM9N12 SoC";
...@@ -78,7 +81,7 @@ ...@@ -78,7 +81,7 @@
pit: timer@fffffe30 { pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>; reg = <0xfffffe30 0xf>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
}; };
shdwc@fffffe10 { shdwc@fffffe10 {
...@@ -89,7 +92,7 @@ ...@@ -89,7 +92,7 @@
mmc0: mmc@f0008000 { mmc0: mmc@f0008000 {
compatible = "atmel,hsmci"; compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>; reg = <0xf0008000 0x600>;
interrupts = <12 4 0>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 0>; dmas = <&dma 1 0>;
dma-names = "rxtx"; dma-names = "rxtx";
#address-cells = <1>; #address-cells = <1>;
...@@ -100,19 +103,19 @@ ...@@ -100,19 +103,19 @@
tcb0: timer@f8008000 { tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb"; compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>; reg = <0xf8008000 0x100>;
interrupts = <17 4 0>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
tcb1: timer@f800c000 { tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb"; compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>; reg = <0xf800c000 0x100>;
interrupts = <17 4 0>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
}; };
dma: dma-controller@ffffec00 { dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma"; compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>; reg = <0xffffec00 0x200>;
interrupts = <20 4 0>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>; #dma-cells = <2>;
}; };
...@@ -134,159 +137,159 @@ ...@@ -134,159 +137,159 @@
dbgu { dbgu {
pinctrl_dbgu: dbgu-0 { pinctrl_dbgu: dbgu-0 {
atmel,pins = atmel,pins =
<0 9 0x1 0x0 /* PA9 periph A */ <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
0 10 0x1 0x1>; /* PA10 periph with pullup */ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */
}; };
}; };
usart0 { usart0 {
pinctrl_usart0: usart0-0 { pinctrl_usart0: usart0-0 {
atmel,pins = atmel,pins =
<0 1 0x1 0x1 /* PA1 periph A with pullup */ <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
0 0 0x1 0x0>; /* PA0 periph A */ AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */
}; };
pinctrl_usart0_rts: usart0_rts-0 { pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins = atmel,pins =
<0 2 0x1 0x0>; /* PA2 periph A */ <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */
}; };
pinctrl_usart0_cts: usart0_cts-0 { pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins = atmel,pins =
<0 3 0x1 0x0>; /* PA3 periph A */ <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */
}; };
}; };
usart1 { usart1 {
pinctrl_usart1: usart1-0 { pinctrl_usart1: usart1-0 {
atmel,pins = atmel,pins =
<0 6 0x1 0x1 /* PA6 periph A with pullup */ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */
0 5 0x1 0x0>; /* PA5 periph A */ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */
}; };
}; };
usart2 { usart2 {
pinctrl_usart2: usart2-0 { pinctrl_usart2: usart2-0 {
atmel,pins = atmel,pins =
<0 8 0x1 0x1 /* PA8 periph A with pullup */ <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */
0 7 0x1 0x0>; /* PA7 periph A */ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */
}; };
pinctrl_usart2_rts: usart2_rts-0 { pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins = atmel,pins =
<1 0 0x2 0x0>; /* PB0 periph B */ <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
}; };
pinctrl_usart2_cts: usart2_cts-0 { pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins = atmel,pins =
<1 1 0x2 0x0>; /* PB1 periph B */ <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
}; };
}; };
usart3 { usart3 {
pinctrl_usart3: usart3-0 { pinctrl_usart3: usart3-0 {
atmel,pins = atmel,pins =
<2 23 0x2 0x1 /* PC23 periph B with pullup */ <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */
2 22 0x2 0x0>; /* PC22 periph B */ AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */
}; };
pinctrl_usart3_rts: usart3_rts-0 { pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins = atmel,pins =
<2 24 0x2 0x0>; /* PC24 periph B */ <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
}; };
pinctrl_usart3_cts: usart3_cts-0 { pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins = atmel,pins =
<2 25 0x2 0x0>; /* PC25 periph B */ <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
}; };
}; };
uart0 { uart0 {
pinctrl_uart0: uart0-0 { pinctrl_uart0: uart0-0 {
atmel,pins = atmel,pins =
<2 9 0x3 0x1 /* PC9 periph C with pullup */ <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */
2 8 0x3 0x0>; /* PC8 periph C */ AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */
}; };
}; };
uart1 { uart1 {
pinctrl_uart1: uart1-0 { pinctrl_uart1: uart1-0 {
atmel,pins = atmel,pins =
<2 16 0x3 0x1 /* PC17 periph C with pullup */ <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */
2 17 0x3 0x0>; /* PC16 periph C */ AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */
}; };
}; };
nand { nand {
pinctrl_nand: nand-0 { pinctrl_nand: nand-0 {
atmel,pins = atmel,pins =
<3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/
3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */
}; };
}; };
mmc0 { mmc0 {
pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
atmel,pins = atmel,pins =
<0 17 0x1 0x0 /* PA17 periph A */ <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
0 16 0x1 0x1 /* PA16 periph A with pullup */ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */
0 15 0x1 0x1>; /* PA15 periph A with pullup */ AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins = atmel,pins =
<0 18 0x1 0x1 /* PA18 periph A with pullup */ <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */
0 19 0x1 0x1 /* PA19 periph A with pullup */ AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */
0 20 0x1 0x1>; /* PA20 periph A with pullup */ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */
}; };
pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
atmel,pins = atmel,pins =
<0 11 0x2 0x1 /* PA11 periph B with pullup */ <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */
0 12 0x2 0x1 /* PA12 periph B with pullup */ AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */
0 13 0x2 0x1 /* PA13 periph B with pullup */ AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */
0 14 0x2 0x1>; /* PA14 periph B with pullup */ AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */
}; };
}; };
ssc0 { ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 { pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins = atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */ <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */ AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */ AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
}; };
pinctrl_ssc0_rx: ssc0_rx-0 { pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins = atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */ <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */ AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */ AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
}; };
}; };
spi0 { spi0 {
pinctrl_spi0: spi0-0 { pinctrl_spi0: spi0-0 {
atmel,pins = atmel,pins =
<0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */
0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */
0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
}; };
}; };
spi1 { spi1 {
pinctrl_spi1: spi1-0 { pinctrl_spi1: spi1-0 {
atmel,pins = atmel,pins =
<0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */
0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */
0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
}; };
}; };
pioA: gpio@fffff400 { pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>; reg = <0xfffff400 0x200>;
interrupts = <2 4 1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -296,7 +299,7 @@ ...@@ -296,7 +299,7 @@
pioB: gpio@fffff600 { pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>; reg = <0xfffff600 0x200>;
interrupts = <2 4 1>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -306,7 +309,7 @@ ...@@ -306,7 +309,7 @@
pioC: gpio@fffff800 { pioC: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>; reg = <0xfffff800 0x200>;
interrupts = <3 4 1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -316,7 +319,7 @@ ...@@ -316,7 +319,7 @@
pioD: gpio@fffffa00 { pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>; reg = <0xfffffa00 0x200>;
interrupts = <3 4 1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
...@@ -327,7 +330,7 @@ ...@@ -327,7 +330,7 @@
dbgu: serial@fffff200 { dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>; reg = <0xfffff200 0x200>;
interrupts = <1 4 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>; pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled"; status = "disabled";
...@@ -336,7 +339,7 @@ ...@@ -336,7 +339,7 @@
ssc0: ssc@f0010000 { ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc"; compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>; reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled"; status = "disabled";
...@@ -345,7 +348,7 @@ ...@@ -345,7 +348,7 @@
usart0: serial@f801c000 { usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>; reg = <0xf801c000 0x4000>;
interrupts = <5 4 5>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>; pinctrl-0 = <&pinctrl_usart0>;
status = "disabled"; status = "disabled";
...@@ -354,7 +357,7 @@ ...@@ -354,7 +357,7 @@
usart1: serial@f8020000 { usart1: serial@f8020000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x4000>; reg = <0xf8020000 0x4000>;
interrupts = <6 4 5>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>; pinctrl-0 = <&pinctrl_usart1>;
status = "disabled"; status = "disabled";
...@@ -363,7 +366,7 @@ ...@@ -363,7 +366,7 @@
usart2: serial@f8024000 { usart2: serial@f8024000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x4000>; reg = <0xf8024000 0x4000>;
interrupts = <7 4 5>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>; pinctrl-0 = <&pinctrl_usart2>;
status = "disabled"; status = "disabled";
...@@ -372,7 +375,7 @@ ...@@ -372,7 +375,7 @@
usart3: serial@f8028000 { usart3: serial@f8028000 {
compatible = "atmel,at91sam9260-usart"; compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x4000>; reg = <0xf8028000 0x4000>;
interrupts = <8 4 5>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>; pinctrl-0 = <&pinctrl_usart3>;
status = "disabled"; status = "disabled";
...@@ -381,7 +384,7 @@ ...@@ -381,7 +384,7 @@
i2c0: i2c@f8010000 { i2c0: i2c@f8010000 {
compatible = "atmel,at91sam9x5-i2c"; compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>; reg = <0xf8010000 0x100>;
interrupts = <9 4 6>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma 1 13>, dmas = <&dma 1 13>,
<&dma 1 14>; <&dma 1 14>;
dma-names = "tx", "rx"; dma-names = "tx", "rx";
...@@ -393,7 +396,7 @@ ...@@ -393,7 +396,7 @@
i2c1: i2c@f8014000 { i2c1: i2c@f8014000 {
compatible = "atmel,at91sam9x5-i2c"; compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>; reg = <0xf8014000 0x100>;
interrupts = <10 4 6>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma 1 15>, dmas = <&dma 1 15>,
<&dma 1 16>; <&dma 1 16>;
dma-names = "tx", "rx"; dma-names = "tx", "rx";
...@@ -407,7 +410,7 @@ ...@@ -407,7 +410,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "atmel,at91rm9200-spi"; compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>; reg = <0xf0000000 0x100>;
interrupts = <13 4 3>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>; pinctrl-0 = <&pinctrl_spi0>;
status = "disabled"; status = "disabled";
...@@ -418,7 +421,7 @@ ...@@ -418,7 +421,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "atmel,at91rm9200-spi"; compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>; reg = <0xf0004000 0x100>;
interrupts = <14 4 3>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
status = "disabled"; status = "disabled";
...@@ -439,8 +442,8 @@ ...@@ -439,8 +442,8 @@
atmel,nand-cmd-offset = <22>; atmel,nand-cmd-offset = <22>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>; pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 5 0 gpios = <&pioD 5 GPIO_ACTIVE_HIGH
&pioD 4 0 &pioD 4 GPIO_ACTIVE_HIGH
0 0
>; >;
status = "disabled"; status = "disabled";
...@@ -449,15 +452,15 @@ ...@@ -449,15 +452,15 @@
usb0: ohci@00500000 { usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>; reg = <0x00500000 0x00100000>;
interrupts = <22 4 2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled"; status = "disabled";
}; };
}; };
i2c@0 { i2c@0 {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
gpios = <&pioA 30 0 /* sda */ gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
&pioA 31 0 /* scl */ &pioA 31 GPIO_ACTIVE_HIGH /* scl */
>; >;
i2c-gpio,sda-open-drain; i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain; i2c-gpio,scl-open-drain;
......
arch/arm/boot/dts/at91sam9n12ek.dts
浏览文件 @ 1247034e
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9n12.dtsi" #include "at91sam9n12.dtsi"
/ { / {
model = "Atmel AT91SAM9N12-EK"; model = "Atmel AT91SAM9N12-EK";
...@@ -55,7 +55,7 @@ ...@@ -55,7 +55,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioA 7 0>; cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -63,7 +63,7 @@ ...@@ -63,7 +63,7 @@
mmc0 { mmc0 {
pinctrl_board_mmc0: mmc0-board { pinctrl_board_mmc0: mmc0-board {
atmel,pins = atmel,pins =
<0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */
}; };
}; };
}; };
...@@ -95,19 +95,19 @@ ...@@ -95,19 +95,19 @@
d8 { d8 {
label = "d8"; label = "d8";
gpios = <&pioB 4 1>; gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0"; linux,default-trigger = "mmc0";
}; };
d9 { d9 {
label = "d6"; label = "d6";
gpios = <&pioB 5 1>; gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk"; linux,default-trigger = "nand-disk";
}; };
d10 { d10 {
label = "d7"; label = "d7";
gpios = <&pioB 6 0>; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
...@@ -117,7 +117,7 @@ ...@@ -117,7 +117,7 @@
enter { enter {
label = "Enter"; label = "Enter";
gpios = <&pioB 4 1>; gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,code = <28>; linux,code = <28>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/at91sam9x25.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9x5.dtsi" #include "at91sam9x5.dtsi"
/ { / {
model = "Atmel AT91SAM9X25 SoC"; model = "Atmel AT91SAM9X25 SoC";
...@@ -26,16 +26,16 @@ ...@@ -26,16 +26,16 @@
macb1 { macb1 {
pinctrl_macb1_rmii: macb1_rmii-0 { pinctrl_macb1_rmii: macb1_rmii-0 {
atmel,pins = atmel,pins =
<2 16 0x2 0x0 /* PC16 periph B */ <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
2 18 0x2 0x0 /* PC18 periph B */ AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
2 19 0x2 0x0 /* PC19 periph B */ AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
2 20 0x2 0x0 /* PC20 periph B */ AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
2 21 0x2 0x0 /* PC21 periph B */ AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
2 27 0x2 0x0 /* PC27 periph B */ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
2 28 0x2 0x0 /* PC28 periph B */ AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
2 29 0x2 0x0 /* PC29 periph B */ AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
2 30 0x2 0x0 /* PC30 periph B */ AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
2 31 0x2 0x0>; /* PC31 periph B */ AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
}; };
}; };
}; };
......
arch/arm/boot/dts/at91sam9x25ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9x25.dtsi" #include "at91sam9x25.dtsi"
/include/ "at91sam9x5ek.dtsi" #include "at91sam9x5ek.dtsi"
/ { / {
model = "Atmel AT91SAM9X25-EK"; model = "Atmel AT91SAM9X25-EK";
......
arch/arm/boot/dts/at91sam9x35.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/include/ "at91sam9x5.dtsi" #include "at91sam9x5.dtsi"
/ { / {
model = "Atmel AT91SAM9X35 SoC"; model = "Atmel AT91SAM9X35 SoC";
......
arch/arm/boot/dts/at91sam9x35ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9x35.dtsi" #include "at91sam9x35.dtsi"
/include/ "at91sam9x5ek.dtsi" #include "at91sam9x5ek.dtsi"
/ { / {
model = "Atmel AT91SAM9X35-EK"; model = "Atmel AT91SAM9X35-EK";
......
arch/arm/boot/dts/at91sam9x5.dtsi
浏览文件 @ 1247034e
此差异已折叠。
arch/arm/boot/dts/at91sam9x5cm.dtsi
浏览文件 @ 1247034e
...@@ -28,7 +28,7 @@ ...@@ -28,7 +28,7 @@
pinctrl@fffff400 { pinctrl@fffff400 {
1wire_cm { 1wire_cm {
pinctrl_1wire_cm: 1wire_cm-0 { pinctrl_1wire_cm: 1wire_cm-0 {
atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
}; };
}; };
}; };
...@@ -75,19 +75,19 @@ ...@@ -75,19 +75,19 @@
pb18 { pb18 {
label = "pb18"; label = "pb18";
gpios = <&pioB 18 1>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
pd21 { pd21 {
label = "pd21"; label = "pd21";
gpios = <&pioD 21 0>; gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
}; };
}; };
1wire_cm { 1wire_cm {
compatible = "w1-gpio"; compatible = "w1-gpio";
gpios = <&pioB 18 0>; gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
linux,open-drain; linux,open-drain;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_1wire_cm>; pinctrl-0 = <&pinctrl_1wire_cm>;
......
arch/arm/boot/dts/at91sam9x5ek.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* *
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "at91sam9x5cm.dtsi" #include "at91sam9x5cm.dtsi"
/ { / {
model = "Atmel AT91SAM9X5-EK"; model = "Atmel AT91SAM9X5-EK";
...@@ -27,7 +27,7 @@ ...@@ -27,7 +27,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 15 0>; cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 14 0>; cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -60,14 +60,14 @@ ...@@ -60,14 +60,14 @@
mmc0 { mmc0 {
pinctrl_board_mmc0: mmc0-board { pinctrl_board_mmc0: mmc0-board {
atmel,pins = atmel,pins =
<3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
}; };
}; };
mmc1 { mmc1 {
pinctrl_board_mmc1: mmc1-board { pinctrl_board_mmc1: mmc1-board {
atmel,pins = atmel,pins =
<3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
}; };
}; };
}; };
...@@ -86,8 +86,8 @@ ...@@ -86,8 +86,8 @@
usb0: ohci@00600000 { usb0: ohci@00600000 {
status = "okay"; status = "okay";
num-ports = <2>; num-ports = <2>;
atmel,vbus-gpio = <&pioD 19 1 atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
&pioD 20 1 &pioD 20 GPIO_ACTIVE_LOW
>; >;
}; };
......
arch/arm/boot/dts/ethernut5.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9260.dtsi" #include "at91sam9260.dtsi"
/ { / {
model = "Ethernut 5"; model = "Ethernut 5";
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
}; };
...@@ -52,7 +52,7 @@ ...@@ -52,7 +52,7 @@
status = "okay"; status = "okay";
gpios = <0 gpios = <0
&pioC 14 0 &pioC 14 GPIO_ACTIVE_HIGH
0 0
>; >;
......
arch/arm/boot/dts/evk-pro3.dts
浏览文件 @ 1247034e
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
/dts-v1/; /dts-v1/;
/include/ "ge863-pro3.dtsi" #include "ge863-pro3.dtsi"
/ { / {
model = "Telit EVK-PRO3 for Telit GE863-PRO3"; model = "Telit EVK-PRO3 for Telit GE863-PRO3";
...@@ -31,7 +31,7 @@ ...@@ -31,7 +31,7 @@
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -50,4 +50,4 @@ ...@@ -50,4 +50,4 @@
status = "okay"; status = "okay";
}; };
}; };
\ No newline at end of file
arch/arm/boot/dts/ge863-pro3.dtsi
浏览文件 @ 1247034e
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "at91sam9260.dtsi" #include "at91sam9260.dtsi"
/ { / {
clocks { clocks {
......
arch/arm/boot/dts/kizbox.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g20.dtsi" #include "at91sam9g20.dtsi"
/ { / {
...@@ -94,26 +94,26 @@ ...@@ -94,26 +94,26 @@
led1g { led1g {
label = "led1:green"; label = "led1:green";
gpios = <&pioB 0 1>; gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
}; };
led1r { led1r {
label = "led1:red"; label = "led1:red";
gpios = <&pioB 1 1>; gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
}; };
led2g { led2g {
label = "led2:green"; label = "led2:green";
gpios = <&pioB 2 1>; gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
default-state = "on"; default-state = "on";
}; };
led2r { led2r {
label = "led2:red"; label = "led2:red";
gpios = <&pioB 3 1>; gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none"; linux,default-trigger = "none";
}; };
}; };
...@@ -125,16 +125,16 @@ ...@@ -125,16 +125,16 @@
reset { reset {
label = "reset"; label = "reset";
gpios = <&pioB 30 1>; gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
linux,code = <0x100>; linux,code = <0x100>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
mode { mode {
label = "mode"; label = "mode";
gpios = <&pioB 31 1>; gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
linux,code = <0x101>; linux,code = <0x101>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
}; };
}; };
\ No newline at end of file
arch/arm/boot/dts/mpa1600.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2 only * Licensed under GPLv2 only
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91rm9200.dtsi" #include "at91rm9200.dtsi"
/ { / {
model = "Phontech MPA 1600"; model = "Phontech MPA 1600";
...@@ -62,7 +62,7 @@ ...@@ -62,7 +62,7 @@
monitor_mute { monitor_mute {
label = "Monitor mute"; label = "Monitor mute";
gpios = <&pioC 1 1>; gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
linux,code = <113>; linux,code = <113>;
}; };
}; };
......
arch/arm/boot/dts/pm9g45.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g45.dtsi" #include "at91sam9g45.dtsi"
/ { / {
model = "Ronetix pm9g45"; model = "Ronetix pm9g45";
...@@ -42,15 +42,15 @@ ...@@ -42,15 +42,15 @@
board { board {
pinctrl_board_nand: nand0-board { pinctrl_board_nand: nand0-board {
atmel,pins = atmel,pins =
<3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/
2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */
}; };
}; };
mmc { mmc {
pinctrl_board_mmc: mmc0-board { pinctrl_board_mmc: mmc0-board {
atmel,pins = atmel,pins =
<3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */
}; };
}; };
}; };
...@@ -64,7 +64,7 @@ ...@@ -64,7 +64,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 6 0>; cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -81,8 +81,8 @@ ...@@ -81,8 +81,8 @@
nand-on-flash-bbt; nand-on-flash-bbt;
pinctrl-0 = <&pinctrl_board_nand>; pinctrl-0 = <&pinctrl_board_nand>;
gpios = <&pioD 3 0 gpios = <&pioD 3 GPIO_ACTIVE_HIGH
&pioC 14 0 &pioC 14 GPIO_ACTIVE_HIGH
0 0
>; >;
...@@ -134,13 +134,13 @@ ...@@ -134,13 +134,13 @@
led0 { led0 {
label = "led0"; label = "led0";
gpios = <&pioD 0 1>; gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk"; linux,default-trigger = "nand-disk";
}; };
led1 { led1 {
label = "led1"; label = "led1";
gpios = <&pioD 31 0>; gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
...@@ -152,13 +152,13 @@ ...@@ -152,13 +152,13 @@
right { right {
label = "SW4"; label = "SW4";
gpios = <&pioE 7 1>; gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
linux,code = <106>; linux,code = <106>;
}; };
up { up {
label = "SW3"; label = "SW3";
gpios = <&pioE 8 1>; gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
linux,code = <103>; linux,code = <103>;
}; };
}; };
......
arch/arm/boot/dts/sama5d3.dtsi
浏览文件 @ 1247034e
此差异已折叠。
arch/arm/boot/dts/sama5d31ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "sama5d3xmb.dtsi" #include "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi" #include "sama5d3xdm.dtsi"
/ { / {
model = "Atmel SAMA5D31-EK"; model = "Atmel SAMA5D31-EK";
...@@ -41,7 +41,7 @@ ...@@ -41,7 +41,7 @@
leds { leds {
d3 { d3 {
label = "d3"; label = "d3";
gpios = <&pioE 24 0>; gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
}; };
}; };
......
arch/arm/boot/dts/sama5d33ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "sama5d3xmb.dtsi" #include "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi" #include "sama5d3xdm.dtsi"
/ { / {
model = "Atmel SAMA5D33-EK"; model = "Atmel SAMA5D33-EK";
......
arch/arm/boot/dts/sama5d34ek.dts
浏览文件 @ 1247034e
...@@ -7,8 +7,8 @@ ...@@ -7,8 +7,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "sama5d3xmb.dtsi" #include "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi" #include "sama5d3xdm.dtsi"
/ { / {
model = "Atmel SAMA5D34-EK"; model = "Atmel SAMA5D34-EK";
...@@ -51,7 +51,7 @@ ...@@ -51,7 +51,7 @@
leds { leds {
d3 { d3 {
label = "d3"; label = "d3";
gpios = <&pioE 24 0>; gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
}; };
}; };
......
arch/arm/boot/dts/sama5d35ek.dts
浏览文件 @ 1247034e
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "sama5d3xmb.dtsi" #include "sama5d3xmb.dtsi"
/ { / {
model = "Atmel SAMA5D35-EK"; model = "Atmel SAMA5D35-EK";
...@@ -48,7 +48,7 @@ ...@@ -48,7 +48,7 @@
pb_user1 { pb_user1 {
label = "pb_user1"; label = "pb_user1";
gpios = <&pioE 27 0>; gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>; linux,code = <0x100>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/sama5d3xcm.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* *
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "sama5d3.dtsi" #include "sama5d3.dtsi"
/ { / {
compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
...@@ -89,7 +89,7 @@ ...@@ -89,7 +89,7 @@
d2 { d2 {
label = "d2"; label = "d2";
gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */
}; };
}; };
}; };
arch/arm/boot/dts/sama5d3xdm.dtsi
浏览文件 @ 1247034e
...@@ -33,7 +33,7 @@ ...@@ -33,7 +33,7 @@
board { board {
pinctrl_qt1070_irq: qt1070_irq { pinctrl_qt1070_irq: qt1070_irq {
atmel,pins = atmel,pins =
<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
}; };
}; };
}; };
......
arch/arm/boot/dts/sama5d3xmb.dtsi
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* *
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/include/ "sama5d3xcm.dtsi" #include "sama5d3xcm.dtsi"
/ { / {
compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 17 0>; cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -62,7 +62,7 @@ ...@@ -62,7 +62,7 @@
slot@0 { slot@0 {
reg = <0>; reg = <0>;
bus-width = <4>; bus-width = <4>;
cd-gpios = <&pioD 18 0>; cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
}; };
}; };
...@@ -87,32 +87,32 @@ ...@@ -87,32 +87,32 @@
board { board {
pinctrl_mmc0_cd: mmc0_cd { pinctrl_mmc0_cd: mmc0_cd {
atmel,pins = atmel,pins =
<3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
}; };
pinctrl_mmc1_cd: mmc1_cd { pinctrl_mmc1_cd: mmc1_cd {
atmel,pins = atmel,pins =
<3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
}; };
pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
atmel,pins = atmel,pins =
<3 30 0x2 0x0>; /* PD30 periph B */ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */
}; };
pinctrl_isi_reset: isi_reset-0 { pinctrl_isi_reset: isi_reset-0 {
atmel,pins = atmel,pins =
<4 24 0x0 0x0>; /* PE24 gpio */ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
}; };
pinctrl_isi_power: isi_power-0 { pinctrl_isi_power: isi_power-0 {
atmel,pins = atmel,pins =
<4 29 0x0 0x0>; /* PE29 gpio */ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
}; };
pinctrl_usba_vbus: usba_vbus { pinctrl_usba_vbus: usba_vbus {
atmel,pins = atmel,pins =
<3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
}; };
}; };
}; };
...@@ -127,7 +127,7 @@ ...@@ -127,7 +127,7 @@
}; };
usb0: gadget@00500000 { usb0: gadget@00500000 {
atmel,vbus-gpio = <&pioD 29 0>; atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>; pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay"; status = "okay";
...@@ -135,9 +135,9 @@ ...@@ -135,9 +135,9 @@
usb1: ohci@00600000 { usb1: ohci@00600000 {
num-ports = <3>; num-ports = <3>;
atmel,vbus-gpio = <&pioD 25 0 atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
&pioD 26 1 &pioD 26 GPIO_ACTIVE_LOW
&pioD 27 1 &pioD 27 GPIO_ACTIVE_LOW
>; >;
status = "okay"; status = "okay";
}; };
......
arch/arm/boot/dts/tny_a9260.dts
浏览文件 @ 1247034e
...@@ -6,8 +6,8 @@ ...@@ -6,8 +6,8 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9260.dtsi" #include "at91sam9260.dtsi"
/include/ "tny_a9260_common.dtsi" #include "tny_a9260_common.dtsi"
/ { / {
model = "Calao TNY A9260"; model = "Calao TNY A9260";
......
arch/arm/boot/dts/tny_a9263.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2 only * Licensed under GPLv2 only
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9263.dtsi" #include "at91sam9263.dtsi"
/ { / {
model = "Calao TNY A9263"; model = "Calao TNY A9263";
...@@ -38,7 +38,7 @@ ...@@ -38,7 +38,7 @@
}; };
usb1: gadget@fff78000 { usb1: gadget@fff78000 {
atmel,vbus-gpio = <&pioB 11 0>; atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
}; };
......
arch/arm/boot/dts/tny_a9g20.dts
浏览文件 @ 1247034e
...@@ -6,8 +6,8 @@ ...@@ -6,8 +6,8 @@
* Licensed under GPLv2. * Licensed under GPLv2.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g20.dtsi" #include "at91sam9g20.dtsi"
/include/ "tny_a9260_common.dtsi" #include "tny_a9260_common.dtsi"
/ { / {
model = "Calao TNY A9G20"; model = "Calao TNY A9G20";
......
arch/arm/boot/dts/usb_a9260.dts
浏览文件 @ 1247034e
...@@ -6,8 +6,8 @@ ...@@ -6,8 +6,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9260.dtsi" #include "at91sam9260.dtsi"
/include/ "usb_a9260_common.dtsi" #include "usb_a9260_common.dtsi"
/ { / {
model = "Calao USB A9260"; model = "Calao USB A9260";
......
arch/arm/boot/dts/usb_a9260_common.dtsi
浏览文件 @ 1247034e
...@@ -30,7 +30,7 @@ ...@@ -30,7 +30,7 @@
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
}; };
...@@ -93,7 +93,7 @@ ...@@ -93,7 +93,7 @@
user_led { user_led {
label = "user_led"; label = "user_led";
gpios = <&pioB 21 1>; gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
...@@ -105,7 +105,7 @@ ...@@ -105,7 +105,7 @@
user_pb { user_pb {
label = "user_pb"; label = "user_pb";
gpios = <&pioB 10 1>; gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>; linux,code = <28>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/usb_a9263.dts
浏览文件 @ 1247034e
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* Licensed under GPLv2 only * Licensed under GPLv2 only
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9263.dtsi" #include "at91sam9263.dtsi"
/ { / {
model = "Calao USB A9263"; model = "Calao USB A9263";
...@@ -43,7 +43,7 @@ ...@@ -43,7 +43,7 @@
}; };
usb1: gadget@fff78000 { usb1: gadget@fff78000 {
atmel,vbus-gpio = <&pioB 11 0>; atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -107,7 +107,7 @@ ...@@ -107,7 +107,7 @@
user_led { user_led {
label = "user_led"; label = "user_led";
gpios = <&pioB 21 0>; gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
...@@ -119,7 +119,7 @@ ...@@ -119,7 +119,7 @@
user_pb { user_pb {
label = "user_pb"; label = "user_pb";
gpios = <&pioB 10 1>; gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>; linux,code = <28>;
gpio-key,wakeup; gpio-key,wakeup;
}; };
......
arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
浏览文件 @ 1247034e
...@@ -28,39 +28,39 @@ ...@@ -28,39 +28,39 @@
user_led1 { user_led1 {
label = "user_led1"; label = "user_led1";
gpios = <&pioB 20 1>; gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
}; };
/* /*
* led already used by mother board but active as high * led already used by mother board but active as high
* user_led2 { * user_led2 {
* label = "user_led2"; * label = "user_led2";
* gpios = <&pioB 21 1>; * gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
* }; * };
*/ */
user_led3 { user_led3 {
label = "user_led3"; label = "user_led3";
gpios = <&pioB 22 1>; gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
}; };
user_led4 { user_led4 {
label = "user_led4"; label = "user_led4";
gpios = <&pioB 23 1>; gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
}; };
red { red {
label = "red"; label = "red";
gpios = <&pioB 24 1>; gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
}; };
orange { orange {
label = "orange"; label = "orange";
gpios = <&pioB 30 1>; gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
}; };
green { green {
label = "green"; label = "green";
gpios = <&pioB 31 1>; gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
}; };
}; };
...@@ -71,25 +71,25 @@ ...@@ -71,25 +71,25 @@
user_pb1 { user_pb1 {
label = "user_pb1"; label = "user_pb1";
gpios = <&pioB 25 1>; gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
linux,code = <0x100>; linux,code = <0x100>;
}; };
user_pb2 { user_pb2 {
label = "user_pb2"; label = "user_pb2";
gpios = <&pioB 13 1>; gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
linux,code = <0x101>; linux,code = <0x101>;
}; };
user_pb3 { user_pb3 {
label = "user_pb3"; label = "user_pb3";
gpios = <&pioA 26 1>; gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <0x102>; linux,code = <0x102>;
}; };
user_pb4 { user_pb4 {
label = "user_pb4"; label = "user_pb4";
gpios = <&pioC 9 1>; gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
linux,code = <0x103>; linux,code = <0x103>;
}; };
}; };
......
arch/arm/boot/dts/usb_a9g20.dts
浏览文件 @ 1247034e
...@@ -6,8 +6,8 @@ ...@@ -6,8 +6,8 @@
* Licensed under GPLv2 or later. * Licensed under GPLv2 or later.
*/ */
/dts-v1/; /dts-v1/;
/include/ "at91sam9g20.dtsi" #include "at91sam9g20.dtsi"
/include/ "usb_a9260_common.dtsi" #include "usb_a9260_common.dtsi"
/ { / {
model = "Calao USB A9G20"; model = "Calao USB A9G20";
......
arch/arm/configs/at91_dt_defconfig
浏览文件 @ 1247034e
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set # CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set # CONFIG_SWAP is not set
CONFIG_SYSVIPC=y CONFIG_SYSVIPC=y
...@@ -25,8 +24,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y ...@@ -25,8 +24,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128 CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set # CONFIG_OABI_COMPAT is not set
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
...@@ -42,6 +39,9 @@ CONFIG_UNIX=y ...@@ -42,6 +39,9 @@ CONFIG_UNIX=y
CONFIG_INET=y CONFIG_INET=y
CONFIG_IP_MULTICAST=y CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
...@@ -51,7 +51,8 @@ CONFIG_IPV6=y ...@@ -51,7 +51,8 @@ CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_SIT_6RD=y
# CONFIG_WIRELESS is not set CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_MOUNT=y
...@@ -72,7 +73,6 @@ CONFIG_BLK_DEV_RAM_COUNT=4 ...@@ -72,7 +73,6 @@ CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_PWM=y CONFIG_ATMEL_PWM=y
CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_93CX6=m
CONFIG_SCSI=y CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_MULTI_LUN=y
...@@ -81,7 +81,6 @@ CONFIG_NETDEVICES=y ...@@ -81,7 +81,6 @@ CONFIG_NETDEVICES=y
CONFIG_MII=y CONFIG_MII=y
CONFIG_MACB=y CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MARVELL is not set
...@@ -92,7 +91,23 @@ CONFIG_MACB=y ...@@ -92,7 +91,23 @@ CONFIG_MACB=y
# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_DAVICOM_PHY=y CONFIG_DAVICOM_PHY=y
CONFIG_MICREL_PHY=y CONFIG_MICREL_PHY=y
# CONFIG_WLAN is not set CONFIG_RTL8187=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
CONFIG_RT2X00=m
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RTLWIFI=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192CU=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
CONFIG_INPUT_POLLDEV=y CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
...@@ -112,13 +127,11 @@ CONFIG_I2C=y ...@@ -112,13 +127,11 @@ CONFIG_I2C=y
CONFIG_I2C_GPIO=y CONFIG_I2C_GPIO=y
CONFIG_SPI=y CONFIG_SPI=y
CONFIG_SPI_ATMEL=y CONFIG_SPI_ATMEL=y
CONFIG_PINCTRL_AT91=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SSB=m CONFIG_SSB=m
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_ATMEL=y CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set # CONFIG_LCD_CLASS_DEVICE is not set
...@@ -132,11 +145,8 @@ CONFIG_FONT_8x8=y ...@@ -132,11 +145,8 @@ CONFIG_FONT_8x8=y
CONFIG_FONT_ACORN_8x8=y CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y CONFIG_LOGO=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=y CONFIG_USB_ACM=y
...@@ -146,14 +156,9 @@ CONFIG_USB_SERIAL_GENERIC=y ...@@ -146,14 +156,9 @@ CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_AT91=m CONFIG_USB_AT91=y
CONFIG_USB_ATMEL_USBA=m CONFIG_USB_ATMEL_USBA=y
CONFIG_USB_ETH=m CONFIG_USB_G_SERIAL=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_CDC=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
...@@ -168,16 +173,18 @@ CONFIG_RTC_DRV_AT91RM9200=y ...@@ -168,16 +173,18 @@ CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
# CONFIG_IOMMU_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_STRIP_ASM_SYMS=y CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHED_DEBUG is not set
...@@ -192,7 +199,7 @@ CONFIG_CRYPTO_ARC4=y ...@@ -192,7 +199,7 @@ CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set # CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=m CONFIG_CRC_ITU_T=y
CONFIG_CRC7=m CONFIG_CRC7=m
CONFIG_AVERAGE=y CONFIG_AVERAGE=y
arch/arm/configs/at91rm9200_defconfig
浏览文件 @ 1247034e
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set # CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set # CONFIG_SWAP is not set
CONFIG_SYSVIPC=y CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14 CONFIG_LOG_BUF_SHIFT=14
CONFIG_USER_NS=y
CONFIG_BLK_DEV_INITRD=y CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_FORCE_LOAD=y
...@@ -35,49 +37,37 @@ CONFIG_AT91_TIMER_HZ=100 ...@@ -35,49 +37,37 @@ CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set # CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y CONFIG_PCCARD=y
CONFIG_AT91_CF=y CONFIG_AT91_CF=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y CONFIG_AEABI=y
CONFIG_LEDS=y # CONFIG_COMPACTION is not set
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000 CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_KEXEC=y CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y CONFIG_BINFMT_MISC=y
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
CONFIG_UNIX=y CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_INET=y CONFIG_INET=y
CONFIG_IP_MULTICAST=y CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_AH=m # CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_ESP=m # CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_IPCOMP=m # CONFIG_INET_DIAG is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_IPV6=y
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y CONFIG_MTD_CFI=y
...@@ -94,55 +84,21 @@ CONFIG_MTD_NAND_PLATFORM=y ...@@ -94,55 +84,21 @@ CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_UBI=y CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_TUN=m CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y CONFIG_ARM_AT91_ETHER=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y CONFIG_MICREL_PHY=y
CONFIG_PPP=y # CONFIG_WLAN is not set
CONFIG_PPP_BSDCOMP=y # CONFIG_INPUT_MOUSEDEV is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=y
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_LEGACY_PTY_COUNT=32 # CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
...@@ -151,38 +107,8 @@ CONFIG_I2C_CHARDEV=y ...@@ -151,38 +107,8 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y CONFIG_I2C_GPIO=y
CONFIG_SPI=y CONFIG_SPI=y
CONFIG_SPI_ATMEL=y CONFIG_SPI_ATMEL=y
CONFIG_SPI_BITBANG=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
CONFIG_HWMON=m # CONFIG_HWMON is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y CONFIG_AT91RM9200_WATCHDOG=y
...@@ -194,43 +120,14 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y ...@@ -194,43 +120,14 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_DISPLAY_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m CONFIG_USB_AT91=y
CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
...@@ -240,84 +137,27 @@ CONFIG_LEDS_TRIGGERS=y ...@@ -240,84 +137,27 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y CONFIG_EXT4_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_REISERFS_FS=y
CONFIG_AUTOFS4_FS=y CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y CONFIG_UBIFS_FS=y
CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_KERNEL=y
# CONFIG_FTRACE is not set # CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1=y
CONFIG_XZ_DEC_ARMTHUMB=y
arch/arm/configs/at91sam9260_defconfig 已删除 100644 → 0
浏览文件 @ 38d77ff9
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_ARCH_AT91SAM9260_SAM9XE=y
CONFIG_MACH_AT91SAM9260EK=y
CONFIG_MACH_CAM60=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MACH_AFEB9260=y
CONFIG_MACH_USB_A9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/sama5_defconfig
浏览文件 @ 1247034e
此差异已折叠。
arch/arm/mach-at91/Kconfig.non_dt
浏览文件 @ 1247034e
此差异已折叠。
arch/arm/mach-at91/Makefile
浏览文件 @ 1247034e
...@@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o ...@@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
......
drivers/usb/gadget/Kconfig
浏览文件 @ 1247034e
此差异已折叠。
drivers/usb/gadget/atmel_usba_udc.c
浏览文件 @ 1247034e
此差异已折叠。
drivers/usb/gadget/atmel_usba_udc.h
浏览文件 @ 1247034e
此差异已折叠。
include/dt-bindings/pinctrl/at91.h 0 → 100644
浏览文件 @ 1247034e
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或