mmc: core: fix the signaling 1.8V for HS200

Currently only 1.2V is treated for HS200 mode. If the host has only
1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called
for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered.
Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NChris Ball <cjb@laptop.org>

drivers/mmc/core/mmc.c

@@ -728,7 +728,7 @@ static int mmc_select_powerclass(struct mmc_card *card,
  */
 static int mmc_select_hs200(struct mmc_card *card)
 {
-	int idx, err = 0;
+	int idx, err = -EINVAL;
 	struct mmc_host *host;
 	static unsigned ext_csd_bits[] = {
 		EXT_CSD_BUS_WIDTH_4,
@@ -744,10 +744,12 @@ static int mmc_select_hs200(struct mmc_card *card)
 	host = card->host;
 
 	if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
-	    host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
-		if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0))
-			err = mmc_set_signal_voltage(host,
-						     MMC_SIGNAL_VOLTAGE_180, 0);
+			host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0);
+
+	if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
+			host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0);
 
 	/* If fails try again during next card power cycle */
 	if (err)