Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
提交 0b019a41 编写于 作者: R Russell King
浏览文件
操作

Merge branches 'master' and 'devel' into for-linus 

Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig
上级 5f6878b0 054d5c92
展开全部 隐藏空白更改
内联 并排
Showing with 16113 addition and 4661 deletion
MAINTAINERS
浏览文件 @ 0b019a41
......@@ -616,10 +616,10 @@ M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Odd Fixes
T: git git://git.berlios.de/gemini-board
S: Maintained
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
......@@ -641,9 +641,10 @@ T: topgit git://git.openezx.org/openezx.git
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Odd Fixes
S: Maintained
T: git://git.berlios.de/gemini-board
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
......@@ -692,6 +693,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
F: arch/arm/mach-sa1100/jornada720.c
F: arch/arm/mach-sa1100/include/mach/jornada720.h
ARM/INCOME PXA270 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/income.c
F: arch/arm/mach-pxa/include/mach-pxa/income.h
ARM/INTEL IOP32X ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
......@@ -947,8 +955,9 @@ ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-sh@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
......
arch/arm/Kconfig
浏览文件 @ 0b019a41
......@@ -644,6 +644,7 @@ config ARCH_S3C2410
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
......@@ -673,6 +674,8 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C
select HAVE_S3C2410_WATCHDOG
help
Samsung S3C64XX series based systems
......@@ -681,7 +684,10 @@ config ARCH_S5P6440
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_WATCHDOG
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
......@@ -691,6 +697,7 @@ config ARCH_S5P6442
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_WATCHDOG
help
Samsung S5P6442 CPU based systems
......@@ -701,6 +708,9 @@ config ARCH_S5PC100
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PC100 series based systems
......@@ -711,9 +721,21 @@ config ARCH_S5PV210
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
config ARCH_S5PV310
bool "Samsung S5PV310/S5PC210"
select CPU_V7
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
help
Samsung S5PV310 series based systems
config ARCH_SHARK
bool "Shark"
select CPU_SA110
......@@ -915,6 +937,8 @@ source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-s5pv310/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
source "arch/arm/plat-stmp3xxx/Kconfig"
......@@ -1120,11 +1144,11 @@ config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || \
ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -1194,10 +1218,10 @@ config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
default y
select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || \\
ARCH_U8500 || ARCH_TEGRA
select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
......@@ -1208,7 +1232,8 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
......
arch/arm/Makefile
浏览文件 @ 0b019a41
......@@ -174,6 +174,7 @@ machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_S5PV310) := s5pv310
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
......
arch/arm/boot/compressed/Makefile
浏览文件 @ 0b019a41
......@@ -33,7 +33,7 @@ ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
ifeq ($(CONFIG_PXA_SHARPSL),y)
ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
OBJS += head-sharpsl.o
endif
......
arch/arm/common/it8152.c
浏览文件 @ 0b019a41
......@@ -263,14 +263,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
return 0;
}
int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
__func__, dma_addr, size);
return (dev->bus == &pci_bus_type) &&
((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
}
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;
......
arch/arm/configs/s5pc110_defconfig 已删除 100644 → 0
浏览文件 @ 5f6878b0
CONFIG_EXPERIMENTAL=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S5PV210=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC110=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_HW_RANDOM=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_S3C_UART=1
CONFIG_CRC_CCITT=y
arch/arm/configs/s5pv210_defconfig
浏览文件 @ 0b019a41
......@@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S5PV210=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_S3C_DEV_FB=y
CONFIG_S5PV210_SETUP_FB_24BPP=y
CONFIG_MACH_AQUILA=y
CONFIG_MACH_GONI=y
CONFIG_MACH_SMDKC110=y
CONFIG_MACH_SMDKV210=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT=y
......
arch/arm/include/asm/dma-mapping.h
浏览文件 @ 0b019a41
......@@ -298,7 +298,15 @@ extern void dmabounce_unregister_dev(struct device *);
* DMA access and 1 if the buffer needs to be bounced.
*
*/
#ifdef CONFIG_SA1111
extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
#else
static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
size_t size)
{
return 0;
}
#endif
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.
......
arch/arm/include/asm/elf.h
浏览文件 @ 0b019a41
......@@ -59,6 +59,8 @@ typedef struct user_fp elf_fpregset_t;
#define R_ARM_THM_CALL 10
#define R_ARM_THM_JUMP24 30
#define R_ARM_THM_MOVW_ABS_NC 47
#define R_ARM_THM_MOVT_ABS 48
/*
* These are used to set parameters in the core dumps.
......
arch/arm/include/asm/hardware/scoop.h
浏览文件 @ 0b019a41
......@@ -22,18 +22,23 @@
#define SCOOP_GPWR 0x24
#define SCOOP_GPRR 0x28
#define SCOOP_GPCR_PA22 ( 1 << 12 )
#define SCOOP_GPCR_PA21 ( 1 << 11 )
#define SCOOP_GPCR_PA20 ( 1 << 10 )
#define SCOOP_GPCR_PA19 ( 1 << 9 )
#define SCOOP_GPCR_PA18 ( 1 << 8 )
#define SCOOP_GPCR_PA17 ( 1 << 7 )
#define SCOOP_GPCR_PA16 ( 1 << 6 )
#define SCOOP_GPCR_PA15 ( 1 << 5 )
#define SCOOP_GPCR_PA14 ( 1 << 4 )
#define SCOOP_GPCR_PA13 ( 1 << 3 )
#define SCOOP_GPCR_PA12 ( 1 << 2 )
#define SCOOP_GPCR_PA11 ( 1 << 1 )
#define SCOOP_CPR_OUT (1 << 7)
#define SCOOP_CPR_SD_3V (1 << 2)
#define SCOOP_CPR_CF_XV (1 << 1)
#define SCOOP_CPR_CF_3V (1 << 0)
#define SCOOP_GPCR_PA22 (1 << 12)
#define SCOOP_GPCR_PA21 (1 << 11)
#define SCOOP_GPCR_PA20 (1 << 10)
#define SCOOP_GPCR_PA19 (1 << 9)
#define SCOOP_GPCR_PA18 (1 << 8)
#define SCOOP_GPCR_PA17 (1 << 7)
#define SCOOP_GPCR_PA16 (1 << 6)
#define SCOOP_GPCR_PA15 (1 << 5)
#define SCOOP_GPCR_PA14 (1 << 4)
#define SCOOP_GPCR_PA13 (1 << 3)
#define SCOOP_GPCR_PA12 (1 << 2)
#define SCOOP_GPCR_PA11 (1 << 1)
struct scoop_config {
unsigned short io_out;
......
arch/arm/kernel/module.c
浏览文件 @ 0b019a41
......@@ -102,7 +102,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
unsigned long loc;
Elf32_Sym *sym;
s32 offset;
#ifdef CONFIG_THUMB2_KERNEL
u32 upper, lower, sign, j1, j2;
#endif
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
......@@ -185,6 +187,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
(offset & 0x0fff);
break;
#ifdef CONFIG_THUMB2_KERNEL
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
upper = *(u16 *)loc;
......@@ -233,9 +236,40 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
(j1 << 13) | (j2 << 11) |
((offset >> 1) & 0x07ff));
break;
case R_ARM_THM_MOVW_ABS_NC:
case R_ARM_THM_MOVT_ABS:
upper = *(u16 *)loc;
lower = *(u16 *)(loc + 2);
/*
* MOVT/MOVW instructions encoding in Thumb-2:
*
* i = upper[10]
* imm4 = upper[3:0]
* imm3 = lower[14:12]
* imm8 = lower[7:0]
*
* imm16 = imm4:i:imm3:imm8
*/
offset = ((upper & 0x000f) << 12) |
((upper & 0x0400) << 1) |
((lower & 0x7000) >> 4) | (lower & 0x00ff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
offset >>= 16;
*(u16 *)loc = (u16)((upper & 0xfbf0) |
((offset & 0xf000) >> 12) |
((offset & 0x0800) >> 1));
*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
((offset & 0x0700) << 4) |
(offset & 0x00ff));
break;
#endif
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
......
arch/arm/mach-clps711x/include/mach/hardware.h
浏览文件 @ 0b019a41
......@@ -69,13 +69,6 @@
#define SYSPLD_VIRT_BASE 0xfe000000
#define SYSPLD_BASE SYSPLD_VIRT_BASE
#ifndef __ASSEMBLER__
#define PCIO_BASE IO_BASE
#endif
#if defined (CONFIG_ARCH_AUTCPU12)
#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE
......
arch/arm/mach-gemini/Kconfig
浏览文件 @ 0b019a41
......@@ -2,6 +2,13 @@ if ARCH_GEMINI
menu "Cortina Systems Gemini Implementations"
config MACH_NAS4220B
bool "Raidsonic NAS-4220-B"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Raidsonic NAS-4220-B.
config MACH_RUT100
bool "Teltonika RUT100"
select GEMINI_MEM_SWAP
......@@ -9,6 +16,20 @@ config MACH_RUT100
Say Y here if you intend to run this kernel on a
Teltonika 3G Router RUT100.
config MACH_WBD111
bool "Wiliboard WBD-111"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Wiliboard WBD-111.
config MACH_WBD222
bool "Wiliboard WBD-222"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Wiliboard WBD-222.
endmenu
config GEMINI_MEM_SWAP
......
arch/arm/mach-gemini/Makefile
浏览文件 @ 0b019a41
......@@ -7,4 +7,7 @@
obj-y := irq.o mm.o time.o devices.o gpio.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
arch/arm/mach-gemini/board-nas4220b.c 0 → 100644
浏览文件 @ 0b019a41
/*
* Support for Raidsonic NAS-4220-B
*
* Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
*
* based on rut1xx.c
* Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/mdio-gpio.h>
#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
#include "common.h"
static struct sys_timer ib4220b_timer = {
.init = gemini_timer_init,
};
static struct gpio_led ib4220b_leds[] = {
{
.name = "nas4220b:orange:hdd",
.default_trigger = "none",
.gpio = 60,
},
{
.name = "nas4220b:green:os",
.default_trigger = "heartbeat",
.gpio = 62,
},
};
static struct gpio_led_platform_data ib4220b_leds_data = {
.num_leds = ARRAY_SIZE(ib4220b_leds),
.leds = ib4220b_leds,
};
static struct platform_device ib4220b_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &ib4220b_leds_data,
},
};
static struct gpio_keys_button ib4220b_keys[] = {
{
.code = KEY_SETUP,
.gpio = 61,
.active_low = 1,
.desc = "Backup Button",
.type = EV_KEY,
},
{
.code = KEY_RESTART,
.gpio = 63,
.active_low = 1,
.desc = "Softreset Button",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data ib4220b_keys_data = {
.buttons = ib4220b_keys,
.nbuttons = ARRAY_SIZE(ib4220b_keys),
};
static struct platform_device ib4220b_key_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &ib4220b_keys_data,
},
};
static void __init ib4220b_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
platform_device_register(&ib4220b_key_device);
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.boot_params = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &ib4220b_timer,
.init_machine = ib4220b_init,
MACHINE_END
arch/arm/mach-gemini/board-wbd111.c 0 → 100644
浏览文件 @ 0b019a41
/*
* Support for Wiliboard WBD-111
*
* Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/skbuff.h>
#include <linux/gpio_keys.h>
#include <linux/mdio-gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button wbd111_keys[] = {
{
.code = KEY_SETUP,
.gpio = 5,
.active_low = 1,
.desc = "reset",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data wbd111_keys_data = {
.buttons = wbd111_keys,
.nbuttons = ARRAY_SIZE(wbd111_keys),
};
static struct platform_device wbd111_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &wbd111_keys_data,
},
};
static struct gpio_led wbd111_leds[] = {
{
.name = "L3red",
.gpio = 1,
},
{
.name = "L4green",
.gpio = 2,
},
{
.name = "L4red",
.gpio = 3,
},
{
.name = "L3green",
.gpio = 5,
},
};
static struct gpio_led_platform_data wbd111_leds_data = {
.num_leds = ARRAY_SIZE(wbd111_leds),
.leds = wbd111_leds,
};
static struct platform_device wbd111_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wbd111_leds_data,
},
};
static struct sys_timer wbd111_timer = {
.init = gemini_timer_init,
};
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wbd111_partitions[] = {
{
.name = "RedBoot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x100000,
} , {
.name = "rootfs",
.offset = 0x120000,
.size = 0x6a0000,
} , {
.name = "VCTL",
.offset = 0x7c0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "cfg",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "FIS",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
#else
#define wbd111_partitions NULL
#define wbd111_num_partitions 0
#endif /* CONFIG_MTD_PARTITIONS */
static void __init wbd111_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, wbd111_partitions,
wbd111_num_partitions);
platform_device_register(&wbd111_leds_device);
platform_device_register(&wbd111_keys_device);
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.boot_params = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd111_timer,
.init_machine = wbd111_init,
MACHINE_END
arch/arm/mach-gemini/board-wbd222.c 0 → 100644
浏览文件 @ 0b019a41
/*
* Support for Wiliboard WBD-222
*
* Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/skbuff.h>
#include <linux/gpio_keys.h>
#include <linux/mdio-gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button wbd222_keys[] = {
{
.code = KEY_SETUP,
.gpio = 5,
.active_low = 1,
.desc = "reset",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data wbd222_keys_data = {
.buttons = wbd222_keys,
.nbuttons = ARRAY_SIZE(wbd222_keys),
};
static struct platform_device wbd222_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &wbd222_keys_data,
},
};
static struct gpio_led wbd222_leds[] = {
{
.name = "L3red",
.gpio = 1,
},
{
.name = "L4green",
.gpio = 2,
},
{
.name = "L4red",
.gpio = 3,
},
{
.name = "L3green",
.gpio = 5,
},
};
static struct gpio_led_platform_data wbd222_leds_data = {
.num_leds = ARRAY_SIZE(wbd222_leds),
.leds = wbd222_leds,
};
static struct platform_device wbd222_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wbd222_leds_data,
},
};
static struct sys_timer wbd222_timer = {
.init = gemini_timer_init,
};
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wbd222_partitions[] = {
{
.name = "RedBoot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x100000,
} , {
.name = "rootfs",
.offset = 0x120000,
.size = 0x6a0000,
} , {
.name = "VCTL",
.offset = 0x7c0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "cfg",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "FIS",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
#else
#define wbd222_partitions NULL
#define wbd222_num_partitions 0
#endif /* CONFIG_MTD_PARTITIONS */
static void __init wbd222_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, wbd222_partitions,
wbd222_num_partitions);
platform_device_register(&wbd222_leds_device);
platform_device_register(&wbd222_keys_device);
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.boot_params = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd222_timer,
.init_machine = wbd222_init,
MACHINE_END
arch/arm/mach-h720x/include/mach/hardware.h
浏览文件 @ 0b019a41
......@@ -182,8 +182,6 @@
#define SERIAL_ENABLE_EN (1<<0)
/* General defines to pacify gcc */
#define PCIO_BASE (0) /* for inb, outb and friends */
#define PCIO_VIRT PCIO_BASE
#define __ASM_ARCH_HARDWARE_INCMACH_H
#include "boards.h"
......
arch/arm/mach-integrator/include/mach/hardware.h
浏览文件 @ 0b019a41
......@@ -32,7 +32,6 @@
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
#define pcibios_assign_all_busses() 1
......
arch/arm/mach-ixp23xx/include/mach/hardware.h
浏览文件 @ 0b019a41
......@@ -15,7 +15,6 @@
#define __ASM_ARCH_HARDWARE_H
/* PCI IO info */
#define PCIO_BASE IXP23XX_PCI_IO_VIRT
#define PCIBIOS_MIN_IO 0x00000000
#define PCIBIOS_MIN_MEM 0xe0000000
......
arch/arm/mach-mmp/aspenite.c
浏览文件 @ 0b019a41
......@@ -150,9 +150,8 @@ static void __init common_init(void)
MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
......@@ -160,9 +159,8 @@ MACHINE_END
MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
......
arch/arm/mach-mmp/avengers_lite.c
浏览文件 @ 0b019a41
......@@ -42,9 +42,8 @@ static void __init avengers_lite_init(void)
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = avengers_lite_init,
......
arch/arm/mach-mmp/common.c
浏览文件 @ 0b019a41
......@@ -31,7 +31,7 @@ static struct map_desc standard_io_desc[] __initdata = {
},
};
void __init pxa_map_io(void)
void __init mmp_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
arch/arm/mach-mmp/common.h
浏览文件 @ 0b019a41
......@@ -3,15 +3,6 @@
struct sys_timer;
extern void timer_init(int irq);
extern void mmp2_clear_pmic_int(void);
extern struct sys_timer pxa168_timer;
extern struct sys_timer pxa910_timer;
extern struct sys_timer mmp2_timer;
extern void __init pxa168_init_irq(void);
extern void __init pxa910_init_irq(void);
extern void __init mmp2_init_icu(void);
extern void __init mmp2_init_irq(void);
extern void __init icu_init_irq(void);
extern void __init pxa_map_io(void);
extern void __init mmp_map_io(void);
arch/arm/mach-mmp/flint.c
浏览文件 @ 0b019a41
......@@ -114,9 +114,8 @@ static void __init flint_init(void)
MACHINE_START(FLINT, "Flint Development Platform")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
......
arch/arm/mach-mmp/include/mach/devices.h
浏览文件 @ 0b019a41
#ifndef __MACH_DEVICE_H
#define __MACH_DEVICE_H
#include <linux/types.h>
#define MAX_RESOURCE_DMA 2
......@@ -47,3 +50,4 @@ struct pxa_device_desc mmp2_device_##_name __initdata = { \
}
extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
#endif /* __MACH_DEVICE_H */
arch/arm/mach-mmp/include/mach/mmp2.h
浏览文件 @ 0b019a41
#ifndef __ASM_MACH_MMP2_H
#define __ASM_MACH_MMP2_H
struct sys_timer;
extern struct sys_timer mmp2_timer;
extern void __init mmp2_init_icu(void);
extern void __init mmp2_init_irq(void);
extern void mmp2_clear_pmic_int(void);
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
......
arch/arm/mach-mmp/include/mach/pxa168.h
浏览文件 @ 0b019a41
#ifndef __ASM_MACH_PXA168_H
#define __ASM_MACH_PXA168_H
struct sys_timer;
extern struct sys_timer pxa168_timer;
extern void __init pxa168_init_irq(void);
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
......
arch/arm/mach-mmp/include/mach/pxa910.h
浏览文件 @ 0b019a41
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
struct sys_timer;
extern struct sys_timer pxa910_timer;
extern void __init pxa910_init_irq(void);
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
......
arch/arm/mach-mmp/irq-mmp2.c
浏览文件 @ 0b019a41
......@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <mach/regs-icu.h>
#include <mach/mmp2.h>
#include "common.h"
......
arch/arm/mach-mmp/jasper.c
浏览文件 @ 0b019a41
......@@ -135,9 +135,8 @@ static void __init jasper_init(void)
MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
......
arch/arm/mach-mmp/mmp2.c
浏览文件 @ 0b019a41
......@@ -17,6 +17,7 @@
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
......@@ -26,6 +27,7 @@
#include <mach/mfp.h>
#include <mach/gpio.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
#include "common.h"
#include "clock.h"
......@@ -158,6 +160,26 @@ static int __init mmp2_init(void)
}
postcore_initcall(mmp2_init);
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_MMP2_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
struct sys_timer mmp2_timer = {
.init = mmp2_timer_init,
};
/* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
......
arch/arm/mach-mmp/tavorevb.c
浏览文件 @ 0b019a41
......@@ -100,9 +100,8 @@ static void __init tavorevb_init(void)
MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = tavorevb_init,
......
arch/arm/mach-mmp/time.c
浏览文件 @ 0b019a41
......@@ -200,24 +200,3 @@ void __init timer_init(int irq)
clocksource_register(&cksrc);
clockevents_register_device(&ckevt);
}
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_MMP2_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
struct sys_timer mmp2_timer = {
.init = mmp2_timer_init,
};
arch/arm/mach-mmp/ttc_dkb.c
浏览文件 @ 0b019a41
......@@ -123,9 +123,8 @@ static void __init ttc_dkb_init(void)
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
.phys_io = APB_PHYS_BASE,
.boot_params = 0x00000100,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = pxa_map_io,
.map_io = mmp_map_io,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,
......
arch/arm/mach-pxa/Kconfig
浏览文件 @ 0b019a41
......@@ -238,6 +238,17 @@ config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI_PXA270_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
depends on MACH_COLIBRI
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
select PXA27x
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
......@@ -336,6 +347,9 @@ config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
config MACH_PALM27X
bool
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
......@@ -360,6 +374,7 @@ config MACH_PALMT5
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
......@@ -370,6 +385,7 @@ config MACH_PALMTX
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
......@@ -380,6 +396,7 @@ config MACH_PALMZ72
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
......@@ -390,6 +407,7 @@ config MACH_PALMLD
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
......@@ -447,16 +465,13 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config SHARPSL_PM
bool
select APM_EMULATION
select SHARPSL_PM_MAX1111
config SHARPSL_PM_MAX1111
bool
depends on !CORGI_SSP_DEPRECATED
select HWMON
select SENSORS_MAX1111
config PXA_SHARPSL_DETECT_MACH_ID
bool "Detect machine ID at run-time in the decompressor"
depends on PXA_SHARPSL
help
Say Y here if you want the zImage decompressor to detect
the Zaurus machine ID at run-time. For latest kexec-based
boot loader, this is not necessary.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
......@@ -510,6 +525,25 @@ config MACH_TOSA
select PXA25x
select PXA_HAVE_BOARD_IRQS
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config TOSA_USE_EXT_KEYCODES
bool "Tosa keyboard: use extended keycodes"
depends on MACH_TOSA
default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
by either console keyboard driver or by Kdrive keybd driver.
Say Y only if you know, what you are doing!
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select CPU_PXA320
......@@ -648,25 +682,15 @@ config PXA_SHARP_Cxx00
help
Enable common support for Sharp Cxx00 models
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config TOSA_USE_EXT_KEYCODES
bool "Tosa keyboard: use extended keycodes"
depends on MACH_TOSA
default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
by either console keyboard driver or by Kdrive keybd driver.
Say Y only if you know, what you are doing!
config SHARPSL_PM
bool
select APM_EMULATION
select SHARPSL_PM_MAX1111
config SHARPSL_PM_MAX1111
bool
select HWMON
select SENSORS_MAX1111
config PXA_HAVE_BOARD_IRQS
bool
......
arch/arm/mach-pxa/Makefile
浏览文件 @ 0b019a41
......@@ -51,14 +51,16 @@ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_VPAC270) += vpac270.o
......@@ -73,6 +75,7 @@ obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALM27X) += palm27x.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
......@@ -84,12 +87,6 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E350) += e350.o
obj-$(CONFIG_MACH_E740) += e740.o
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
......
arch/arm/mach-pxa/balloon3.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/cm-x300.c
浏览文件 @ 0b019a41
......@@ -689,6 +689,7 @@ static void __init cm_x300_init_da9030(void)
{
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
set_irq_wake(IRQ_WAKEUP0, 1);
}
static void __init cm_x300_init_wi2wi(void)
......@@ -745,9 +746,10 @@ static void __init cm_x300_init(void)
{
cm_x300_init_mfp();
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
if (cpu_is_pxa300())
pxa_set_ffuart_info(NULL);
cm_x300_init_da9030();
cm_x300_init_dm9000();
......
arch/arm/mach-pxa/colibri-pxa270-evalboard.c 0 → 100644
浏览文件 @ 0b019a41
/*
* linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
*
* Support for Toradex PXA270 based Colibri Evaluation Carrier Board
* Daniel Mack <daniel@caiaq.de>
* Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa27x-udc.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
GPIO119_USBH2_PWR,
GPIO120_USBH2_PEN,
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT,
.gpio_card_ro = -1,
.detect_delay_ms = 200,
};
static void __init colibri_pxa270_mmc_init(void)
{
pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
}
#else
static inline void colibri_pxa270_mmc_init(void) {}
#endif
/******************************************************************************
* USB Host
******************************************************************************/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int colibri_pxa270_ohci_init(struct device *dev)
{
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
return 0;
}
static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 |
POWER_CONTROL_LOW | POWER_SENSE_LOW,
.init = colibri_pxa270_ohci_init,
};
static void __init colibri_pxa270_uhc_init(void)
{
pxa_set_ohci_info(&colibri_pxa270_ohci_info);
}
#else
static inline void colibri_pxa270_uhc_init(void) {}
#endif
void __init colibri_pxa270_evalboard_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
colibri_pxa270_mmc_init();
colibri_pxa270_uhc_init();
}
arch/arm/mach-pxa/colibri-pxa270-income.c 0 → 100644
浏览文件 @ 0b019a41
/*
* linux/arch/arm/mach-pxa/income.c
*
* Support for Income s.r.o. SH-Dmaster PXA270 SBC
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
* Pavel Revak <palo@bielyvlk.sk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/sysdev.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include "devices.h"
#include "generic.h"
#define GPIO114_INCOME_ETH_IRQ (114)
#define GPIO0_INCOME_SD_DETECT (0)
#define GPIO0_INCOME_SD_RO (1)
#define GPIO54_INCOME_LED_A (54)
#define GPIO55_INCOME_LED_B (55)
#define GPIO113_INCOME_TS_IRQ (113)
/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t income_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO0_GPIO, /* SD detect */
GPIO1_GPIO, /* SD read-only */
/* FFUART */
GPIO39_FFUART_TXD,
GPIO34_FFUART_RXD,
/* BFUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
/* PWM */
GPIO16_PWM0_OUT,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* LED */
GPIO54_GPIO, /* LED A */
GPIO55_GPIO, /* LED B */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data income_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO0_INCOME_SD_DETECT,
.gpio_card_ro = GPIO0_INCOME_SD_RO,
.detect_delay_ms = 200,
};
static void __init income_mmc_init(void)
{
pxa_set_mci_info(&income_mci_platform_data);
}
#else
static inline void income_mmc_init(void) {}
#endif
/******************************************************************************
* USB Host
******************************************************************************/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static struct pxaohci_platform_data income_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static void __init income_uhc_init(void)
{
pxa_set_ohci_info(&income_ohci_info);
}
#else
static inline void income_uhc_init(void) {}
#endif
/******************************************************************************
* LED
******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led income_gpio_leds[] = {
{
.name = "income:green:leda",
.default_trigger = "none",
.gpio = GPIO54_INCOME_LED_A,
.active_low = 1,
},
{
.name = "income:green:ledb",
.default_trigger = "none",
.gpio = GPIO55_INCOME_LED_B,
.active_low = 1,
}
};
static struct gpio_led_platform_data income_gpio_led_info = {
.leds = income_gpio_leds,
.num_leds = ARRAY_SIZE(income_gpio_leds),
};
static struct platform_device income_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &income_gpio_led_info,
}
};
static void __init income_led_init(void)
{
platform_device_register(&income_leds);
}
#else
static inline void income_led_init(void) {}
#endif
/******************************************************************************
* I2C
******************************************************************************/
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
static struct i2c_board_info __initdata income_i2c_devs[] = {
{
I2C_BOARD_INFO("ds1340", 0x68),
}, {
I2C_BOARD_INFO("lm75", 0x4f),
},
};
static void __init income_i2c_init(void)
{
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
}
#else
static inline void income_i2c_init(void) {}
#endif
/******************************************************************************
* Framebuffer
******************************************************************************/
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info income_lcd_modes[] = {
{
.pixclock = 144700,
.xres = 320,
.yres = 240,
.bpp = 32,
.depth = 18,
.left_margin = 10,
.right_margin = 10,
.upper_margin = 7,
.lower_margin = 8,
.hsync_len = 20,
.vsync_len = 2,
.sync = FB_SYNC_VERT_HIGH_ACT,
},
};
static struct pxafb_mach_info income_lcd_screen = {
.modes = income_lcd_modes,
.num_modes = ARRAY_SIZE(income_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
};
static void __init income_lcd_init(void)
{
set_pxa_fb_info(&income_lcd_screen);
}
#else
static inline void income_lcd_init(void) {}
#endif
/******************************************************************************
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
static struct platform_pwm_backlight_data income_backlight_data = {
.pwm_id = 0,
.max_brightness = 0x3ff,
.dft_brightness = 0x1ff,
.pwm_period_ns = 1000000,
};
static struct platform_device income_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &income_backlight_data,
},
};
static void __init income_pwm_init(void)
{
platform_device_register(&income_backlight);
}
#else
static inline void income_pwm_init(void) {}
#endif
void __init colibri_pxa270_income_boardinit(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
income_mmc_init();
income_uhc_init();
income_led_init();
income_i2c_init();
income_lcd_init();
income_pwm_init();
}
arch/arm/mach-pxa/colibri-pxa270.c
浏览文件 @ 0b019a41
......@@ -3,6 +3,7 @@
*
* Support for Toradex PXA270 based Colibri module
* Daniel Mack <daniel@caiaq.de>
* Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -10,49 +11,55 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/ucb1400.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/colibri.h>
#include <mach/pxa27x.h>
#include "generic.h"
#include "devices.h"
#include "generic.h"
/*
* GPIO configuration
*/
/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
/* Ethernet */
GPIO78_nCS_2, /* Ethernet CS */
GPIO114_GPIO, /* Ethernet IRQ */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO95_AC97_nRESET,
GPIO98_AC97_SYSCLK,
GPIO113_GPIO, /* Touchscreen IRQ */
};
/*
* NOR flash
*/
/******************************************************************************
* NOR Flash
******************************************************************************/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition colibri_partitions[] = {
{
.name = "Bootloader",
.offset = 0x00000000,
.size = 0x00040000,
.mask_flags = MTD_WRITEABLE /* force read-only */
.mask_flags = MTD_WRITEABLE /* force read-only */
}, {
.name = "Kernel",
.offset = 0x00040000,
......@@ -90,50 +97,113 @@ static struct platform_device colibri_pxa270_flash_device = {
.num_resources = 1,
};
/*
* DM9000 Ethernet
*/
#if defined(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = COLIBRI_PXA270_ETH_PHYS,
.end = COLIBRI_PXA270_ETH_PHYS + 3,
static void __init colibri_pxa270_nor_init(void)
{
platform_device_register(&colibri_pxa270_flash_device);
}
#else
static inline void colibri_pxa270_nor_init(void) {}
#endif
/******************************************************************************
* Ethernet
******************************************************************************/
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource colibri_pxa270_dm9000_resources[] = {
{
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = COLIBRI_PXA270_ETH_PHYS + 4,
.end = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
{
.start = PXA_CS2_PHYS + 4,
.end = PXA_CS2_PHYS + 4 + 500,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = COLIBRI_PXA270_ETH_IRQ,
.end = COLIBRI_PXA270_ETH_IRQ,
{
.start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
static struct platform_device dm9000_device = {
static struct platform_device colibri_pxa270_dm9000_device = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
.num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources),
.resource = colibri_pxa270_dm9000_resources,
};
#endif /* CONFIG_DM9000 */
static struct platform_device *colibri_pxa270_devices[] __initdata = {
&colibri_pxa270_flash_device,
#if defined(CONFIG_DM9000)
&dm9000_device,
static void __init colibri_pxa270_eth_init(void)
{
platform_device_register(&colibri_pxa270_dm9000_device);
}
#else
static inline void colibri_pxa270_eth_init(void) {}
#endif
/******************************************************************************
* Audio and Touchscreen
******************************************************************************/
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
.reset_gpio = 95,
};
static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
.irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
};
static struct platform_device colibri_pxa270_ucb1400_device = {
.name = "ucb1400_core",
.id = -1,
.dev = {
.platform_data = &colibri_pxa270_ucb1400_pdata,
},
};
static void __init colibri_pxa270_tsc_init(void)
{
pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
platform_device_register(&colibri_pxa270_ucb1400_device);
}
#else
static inline void colibri_pxa270_tsc_init(void) {}
#endif
static int colibri_pxa270_baseboard;
core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
static void __init colibri_pxa270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
colibri_pxa270_nor_init();
colibri_pxa270_eth_init();
colibri_pxa270_tsc_init();
switch (colibri_pxa270_baseboard) {
case COLIBRI_PXA270_EVALBOARD:
colibri_pxa270_evalboard_init();
break;
case COLIBRI_PXA270_INCOME:
colibri_pxa270_income_boardinit();
break;
default:
printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
colibri_pxa270_baseboard);
}
}
/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
* with the INCOME mach type or with COLIBRI and the kernel parameter
* "colibri_pxa270_baseboard=1"
*/
static void __init colibri_pxa270_income_init(void)
{
colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
colibri_pxa270_init();
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
......@@ -146,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.init_machine = colibri_pxa270_income_init,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/colibri-pxa320.c
浏览文件 @ 0b019a41
......@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
......@@ -28,6 +29,8 @@
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/audio.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include "generic.h"
#include "devices.h"
......@@ -101,6 +104,42 @@ void __init colibri_pxa320_init_ohci(void)
static inline void colibri_pxa320_init_ohci(void) {}
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
.gpio_pullup = -1,
};
static struct platform_device colibri_pxa320_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.dev = {
.platform_data = &colibri_pxa320_gpio_vbus_info,
},
};
static void colibri_pxa320_udc_command(int cmd)
{
if (cmd == PXA2XX_UDC_CMD_CONNECT)
UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
UP2OCR = UP2OCR_HXOE;
}
static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
.udc_command = colibri_pxa320_udc_command,
.gpio_pullup = -1,
};
static void __init colibri_pxa320_init_udc(void)
{
pxa_set_udc_info(&colibri_pxa320_udc_info);
platform_device_register(&colibri_pxa320_gpio_vbus);
}
#else
static inline void colibri_pxa320_init_udc(void) {}
#endif
static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
......@@ -212,6 +251,7 @@ void __init colibri_pxa320_init(void)
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
colibri_pxa320_init_uart();
colibri_pxa320_init_udc();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
......
arch/arm/mach-pxa/corgi.c
浏览文件 @ 0b019a41
......@@ -50,14 +50,13 @@
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
#include <mach/sharpsl.h>
#include <mach/sharpsl_pm.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
#include "devices.h"
#include "sharpsl.h"
static unsigned long corgi_pin_config[] __initdata = {
/* Static Memory I/O */
......@@ -185,8 +184,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = {
.num_devs = 1,
};
EXPORT_SYMBOL(corgiscoop_device);
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
......
arch/arm/mach-pxa/corgi_pm.c
浏览文件 @ 0b019a41
......@@ -23,12 +23,11 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/sharpsl.h>
#include <mach/corgi.h>
#include <mach/pxa2xx-regs.h>
#include <mach/sharpsl_pm.h>
#include "generic.h"
#include "sharpsl.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
......@@ -134,11 +133,11 @@ unsigned long corgipm_read_devdata(int type)
case SHARPSL_STATUS_ACIN:
return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
......@@ -165,8 +164,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.should_wakeup = corgi_should_wakeup,
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
#elif defined(CONFIG_BACKLIGHT_CORGI)
.backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
......
arch/arm/mach-pxa/devices.c
浏览文件 @ 0b019a41
......@@ -4,6 +4,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/pmu.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
......@@ -31,6 +32,19 @@ void __init pxa_register_device(struct platform_device *dev, void *data)
dev_err(&dev->dev, "unable to register device: %d\n", ret);
}
static struct resource pxa_resource_pmu = {
.start = IRQ_PMU,
.end = IRQ_PMU,
.flags = IORESOURCE_IRQ,
};
struct platform_device pxa_device_pmu = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.resource = &pxa_resource_pmu,
.num_resources = 1,
};
static struct resource pxamci_resources[] = {
[0] = {
.start = 0x41100000,
......
arch/arm/mach-pxa/devices.h
浏览文件 @ 0b019a41
extern struct platform_device pxa_device_pmu;
extern struct platform_device pxa_device_mci;
extern struct platform_device pxa3xx_device_mci2;
extern struct platform_device pxa3xx_device_mci3;
......
arch/arm/mach-pxa/e330.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* Hardware definitions for the Toshiba e330 PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mfd/tc6387xb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
/* -------------------- e330 tc6387xb parameters -------------------- */
static struct tc6387xb_platform_data e330_tc6387xb_info = {
.enable = &eseries_tmio_enable,
.disable = &eseries_tmio_disable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
};
static struct platform_device e330_tc6387xb_device = {
.name = "tc6387xb",
.id = -1,
.dev = {
.platform_data = &e330_tc6387xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* --------------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e330_tc6387xb_device,
};
static void __init e330_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e330_init,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/e350.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* Hardware definitions for the Toshiba e350 PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mfd/t7l66xb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
/* -------------------- e350 t7l66xb parameters -------------------- */
static struct t7l66xb_platform_data e350_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
};
static struct platform_device e350_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e350_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ---------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e350_t7l66xb_device,
};
static void __init e350_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e350_init,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/e400.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* Hardware definitions for the Toshiba eseries PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mfd/t7l66xb.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
#include <mach/irqs.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
/* ------------------------ E400 LCD definitions ------------------------ */
static struct pxafb_mode_info e400_pxafb_mode_info = {
.pixclock = 140703,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 28,
.right_margin = 8,
.vsync_len = 3,
.upper_margin = 5,
.lower_margin = 6,
.sync = 0,
};
static struct pxafb_mach_info e400_pxafb_mach_info = {
.modes = &e400_pxafb_mode_info,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP,
.lccr3 = 0,
.pxafb_backlight_power = NULL,
};
/* ------------------------ E400 MFP config ----------------------------- */
static unsigned long e400_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO12_32KHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* ---------------------------------------------------------------------- */
static struct mtd_partition partition_a = {
.name = "Internal NAND flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct tmio_nand_data e400_t7l66xb_nand_config = {
.num_partitions = 1,
.partition = &partition_a,
.badblock_pattern = &e400_t7l66xb_nand_bbt,
};
static struct t7l66xb_platform_data e400_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.nand_data = &e400_t7l66xb_nand_config,
};
static struct platform_device e400_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e400_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ---------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e400_t7l66xb_device,
};
static void __init e400_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
set_pxa_fb_info(&e400_pxafb_mach_info);
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/e740.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* Hardware definitions for the Toshiba eseries PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/clk.h>
#include <linux/mfd/t7l66xb.h>
#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
#include "devices.h"
/* ------------------------ e740 video support --------------------------- */
static struct w100_gen_regs e740_lcd_regs = {
.lcd_format = 0x00008023,
.lcdd_cntl1 = 0x0f000000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x00ffff03,
.genlcd_cntl2 = 0x003c0f03,
.genlcd_cntl3 = 0x000143aa,
};
static struct w100_mode e740_lcd_mode = {
.xres = 240,
.yres = 320,
.left_margin = 20,
.right_margin = 28,
.upper_margin = 9,
.lower_margin = 8,
.crtc_ss = 0x80140013,
.crtc_ls = 0x81150110,
.crtc_gs = 0x80050005,
.crtc_vpos_gs = 0x000a0009,
.crtc_rev = 0x0040010a,
.crtc_dclk = 0xa906000a,
.crtc_gclk = 0x80050108,
.crtc_goe = 0x80050108,
.pll_freq = 57,
.pixclk_divider = 4,
.pixclk_divider_rotated = 4,
.pixclk_src = CLK_SRC_XTAL,
.sysclk_divider = 1,
.sysclk_src = CLK_SRC_PLL,
.crtc_ps1_active = 0x41060010,
};
static struct w100_gpio_regs e740_w100_gpio_info = {
.init_data1 = 0x21002103,
.gpio_dir1 = 0xffffdeff,
.gpio_oe1 = 0x03c00643,
.init_data2 = 0x003f003f,
.gpio_dir2 = 0xffffffff,
.gpio_oe2 = 0x000000ff,
};
static struct w100fb_mach_info e740_fb_info = {
.modelist = &e740_lcd_mode,
.num_modes = 1,
.regs = &e740_lcd_regs,
.gpio = &e740_w100_gpio_info,
.xtal_freq = 14318000,
.xtal_dbl = 1,
};
static struct resource e740_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device e740_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e740_fb_info,
},
.num_resources = ARRAY_SIZE(e740_fb_resources),
.resource = e740_fb_resources,
};
/* --------------------------- MFP Pin config -------------------------- */
static unsigned long e740_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO79_nCS_3, /* CS3 - IMAGEON */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO12_32KHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* UDC */
GPIO13_GPIO,
GPIO3_GPIO,
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* Audio power control */
GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
GPIO40_GPIO, /* Mic amp power */
GPIO41_GPIO, /* Headphone amp power */
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
GPIO11_GPIO, /* IRQ0 */
GPIO6_GPIO, /* IRQ1 */
GPIO27_GPIO, /* RST0 */
GPIO24_GPIO, /* RST1 */
GPIO20_GPIO, /* PWR0 */
GPIO23_GPIO, /* PWR1 */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* -------------------- e740 t7l66xb parameters -------------------- */
static struct t7l66xb_platform_data e740_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
};
static struct platform_device e740_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e740_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ----------------------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e740_fb_device,
&e740_t7l66xb_device,
};
static void __init e740_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
eseries_register_clks();
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e740_init,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/e750.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* Hardware definitions for the Toshiba eseries PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/mfd/tc6393xb.h>
#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
/* ---------------------- E750 LCD definitions -------------------- */
static struct w100_gen_regs e750_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x00000000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x00fff003,
.genlcd_cntl2 = 0x003c0f03,
.genlcd_cntl3 = 0x000143aa,
};
static struct w100_mode e750_lcd_mode = {
.xres = 240,
.yres = 320,
.left_margin = 21,
.right_margin = 22,
.upper_margin = 5,
.lower_margin = 4,
.crtc_ss = 0x80150014,
.crtc_ls = 0x8014000d,
.crtc_gs = 0xc1000005,
.crtc_vpos_gs = 0x00020147,
.crtc_rev = 0x0040010a,
.crtc_dclk = 0xa1700030,
.crtc_gclk = 0x80cc0015,
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x61060017,
.pll_freq = 57,
.pixclk_divider = 4,
.pixclk_divider_rotated = 4,
.pixclk_src = CLK_SRC_XTAL,
.sysclk_divider = 1,
.sysclk_src = CLK_SRC_PLL,
};
static struct w100_gpio_regs e750_w100_gpio_info = {
.init_data1 = 0x01192f1b,
.gpio_dir1 = 0xd5ffdeff,
.gpio_oe1 = 0x000020bf,
.init_data2 = 0x010f010f,
.gpio_dir2 = 0xffffffff,
.gpio_oe2 = 0x000001cf,
};
static struct w100fb_mach_info e750_fb_info = {
.modelist = &e750_lcd_mode,
.num_modes = 1,
.regs = &e750_lcd_regs,
.gpio = &e750_w100_gpio_info,
.xtal_freq = 14318000,
.xtal_dbl = 1,
};
static struct resource e750_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device e750_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e750_fb_info,
},
.num_resources = ARRAY_SIZE(e750_fb_resources),
.resource = e750_fb_resources,
};
/* -------------------- e750 MFP parameters -------------------- */
static unsigned long e750_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO79_nCS_3, /* CS3 - IMAGEON */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO11_3_6MHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* UDC */
GPIO13_GPIO,
GPIO3_GPIO,
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* Audio power control */
GPIO4_GPIO, /* Headphone amp power */
GPIO7_GPIO, /* Speaker amp power */
GPIO37_GPIO, /* Headphone detect */
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
GPIO11_GPIO, /* IRQ0 */
GPIO6_GPIO, /* IRQ1 */
GPIO27_GPIO, /* RST0 */
GPIO24_GPIO, /* RST1 */
GPIO20_GPIO, /* PWR0 */
GPIO23_GPIO, /* PWR1 */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* ----------------- e750 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e750_tc6393xb_info = {
.irq_base = IRQ_BOARD_START,
.scr_pll2cr = 0x0cc1,
.scr_gper = 0,
.gpio_base = -1,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.enable = &eseries_tmio_enable,
.disable = &eseries_tmio_disable,
};
static struct platform_device e750_tc6393xb_device = {
.name = "tc6393xb",
.id = -1,
.dev = {
.platform_data = &e750_tc6393xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ------------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e750_fb_device,
&e750_tc6393xb_device,
};
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e750_init,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/e800.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* Hardware definitions for the Toshiba eseries PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/mfd/tc6393xb.h>
#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
/* ------------------------ e800 LCD definitions ------------------------- */
static unsigned long e800_pin_config[] __initdata = {
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
};
static struct w100_gen_regs e800_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x02a00000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x000ff2a3,
.genlcd_cntl2 = 0x000002a3,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_mode e800_lcd_mode[2] = {
[0] = {
.xres = 480,
.yres = 640,
.left_margin = 52,
.right_margin = 148,
.upper_margin = 2,
.lower_margin = 6,
.crtc_ss = 0x80350034,
.crtc_ls = 0x802b0026,
.crtc_gs = 0x80160016,
.crtc_vpos_gs = 0x00020003,
.crtc_rev = 0x0040001d,
.crtc_dclk = 0xe0000000,
.crtc_gclk = 0x82a50049,
.crtc_goe = 0x80ee001c,
.crtc_ps1_active = 0x00000000,
.pll_freq = 128,
.pixclk_divider = 4,
.pixclk_divider_rotated = 6,
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
},
[1] = {
.xres = 240,
.yres = 320,
.left_margin = 15,
.right_margin = 88,
.upper_margin = 0,
.lower_margin = 7,
.crtc_ss = 0xd010000f,
.crtc_ls = 0x80070003,
.crtc_gs = 0x80000000,
.crtc_vpos_gs = 0x01460147,
.crtc_rev = 0x00400003,
.crtc_dclk = 0xa1700030,
.crtc_gclk = 0x814b0008,
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x00000000,
.pll_freq = 100,
.pixclk_divider = 6, /* Wince uses 14 which gives a */
.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
}
};
static struct w100_gpio_regs e800_w100_gpio_info = {
.init_data1 = 0xc13fc019,
.gpio_dir1 = 0x3e40df7f,
.gpio_oe1 = 0x003c3000,
.init_data2 = 0x00000000,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mem_info e800_w100_mem_info = {
.ext_cntl = 0x09640011,
.sdram_mode_reg = 0x00600021,
.ext_timing_cntl = 0x10001545,
.io_cntl = 0x7ddd7333,
.size = 0x1fffff,
};
static void e800_tg_change(struct w100fb_par *par)
{
unsigned long tmp;
tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
if (par->mode->xres == 480)
tmp |= 0x100;
else
tmp &= ~0x100;
w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
}
static struct w100_tg_info e800_tg_info = {
.change = e800_tg_change,
};
static struct w100fb_mach_info e800_fb_info = {
.modelist = e800_lcd_mode,
.num_modes = 2,
.regs = &e800_lcd_regs,
.gpio = &e800_w100_gpio_info,
.mem = &e800_w100_mem_info,
.tg = &e800_tg_info,
.xtal_freq = 16000000,
};
static struct resource e800_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device e800_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e800_fb_info,
},
.num_resources = ARRAY_SIZE(e800_fb_resources),
.resource = e800_fb_resources,
};
/* --------------------------- UDC definitions --------------------------- */
static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
.gpio_vbus = GPIO_E800_USB_DISC,
.gpio_pullup = GPIO_E800_USB_PULLUP,
.gpio_pullup_inverted = 1
};
/* ----------------- e800 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e800_tc6393xb_info = {
.irq_base = IRQ_BOARD_START,
.scr_pll2cr = 0x0cc1,
.scr_gper = 0,
.gpio_base = -1,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.enable = &eseries_tmio_enable,
.disable = &eseries_tmio_disable,
};
static struct platform_device e800_tc6393xb_device = {
.name = "tc6393xb",
.id = -1,
.dev = {
.platform_data = &e800_tc6393xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ----------------------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e800_fb_device,
&e800_tc6393xb_device,
};
static void __init e800_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e800_udc_mach_info);
pxa_set_ac97_info(NULL);
}
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e800_init,
.timer = &pxa_timer,
MACHINE_END
arch/arm/mach-pxa/eseries.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/imote2.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
此差异已折叠。
arch/arm/mach-pxa/include/mach/balloon3.h
浏览文件 @ 0b019a41
......@@ -26,21 +26,55 @@ enum balloon3_features {
#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
/* FPGA/CPLD registers */
#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
/* fixme - same for now */
#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
/* FPGA / CPLD registers for CF socket */
#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
/* FPGA / CPLD version register */
#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c)
/* FPGA / CPLD registers for NAND flash */
#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
/* fpga/cpld interrupt control register */
#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
/* CF Status Register bits (read-only) bits */
#define BALLOON3_CF_nIRQ (1 << 0)
#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1)
/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
#define BALLOON3_CF_RESET (1 << 0)
#define BALLOON3_CF_ENABLE (1 << 1)
#define BALLOON3_CF_ADD_ENABLE (1 << 2)
/* CF Interrupt sources */
#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
/* NAND Control register */
#define BALLOON3_NAND_CONTROL_FLWP (1 << 7)
#define BALLOON3_NAND_CONTROL_FLSE (1 << 6)
#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5)
#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4)
#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3)
#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2)
#define BALLOON3_NAND_CONTROL_FLALE (1 << 1)
#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0)
/* NAND Status register */
#define BALLOON3_NAND_STAT_RNB (1 << 0)
/* NAND Control2 register */
#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0)
/* GPIOs for irqs */
#define BALLOON3_GPIO_AUX_NIRQ (94)
#define BALLOON3_GPIO_CODEC_IRQ (95)
......@@ -54,20 +88,24 @@ enum balloon3_features {
#define BALLOON3_GPIO_S0_CD (105)
/* NAND */
#define BALLOON3_GPIO_RUN_NAND (102)
/* PCF8574A Leds */
#define BALLOON3_PCF_GPIO_BASE 160
#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0)
#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1)
#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2)
#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3)
#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4)
#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5)
#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6)
#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7)
/* FPGA Interrupt Mask/Acknowledge Register */
#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
/* CF Status Register */
#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
/* VDD sense / card status changed */
/* CF control register (write) */
#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
#define BALLOON3_PCMCIA_ENABLE (1 << 1)
#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
/* CPLD (and FPGA) interface definitions */
#define CPLD_LCD0_DATA_SET 0x00
#define CPLD_LCD0_DATA_CLR 0x10
......@@ -132,9 +170,6 @@ enum balloon3_features {
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
......
arch/arm/mach-pxa/include/mach/colibri.h
浏览文件 @ 0b019a41
......@@ -4,6 +4,27 @@
#include <net/ax88796.h>
#include <mach/mfp.h>
/*
* base board glue for PXA270 module
*/
enum {
COLIBRI_PXA270_EVALBOARD = 0,
COLIBRI_PXA270_INCOME,
};
#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
extern void colibri_pxa270_evalboard_init(void);
#else
static inline void colibri_pxa270_evalboard_init(void) {}
#endif
#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
extern void colibri_pxa270_income_boardinit(void);
#else
static inline void colibri_pxa270_income_boardinit(void) {}
#endif
/*
* common settings for all modules
*/
......@@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {}
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
/* definitions for Colibri PXA270 */
#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
#define COLIBRI_PXA270_ETH_IRQ \
gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
/* GPIO definitions for Colibri PXA270 */
#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
#endif /* _COLIBRI_H_ */
arch/arm/mach-pxa/include/mach/corgi.h
浏览文件 @ 0b019a41
......@@ -109,10 +109,5 @@
#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7)
#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8)
/*
* Shared data structures
*/
extern struct platform_device corgiscoop_device;
#endif /* __ASM_ARCH_CORGI_H */
arch/arm/mach-pxa/include/mach/gumstix.h
浏览文件 @ 0b019a41
......@@ -14,25 +14,15 @@
/*
GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
interrupt signal for determining cable presence. On the original gumstix,
this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
interrupt signal for determining cable presence. On the gumstix F,
this moves to GPIO17 and GPIO37. */
/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
has detected a cable insertion; driven low otherwise. */
#ifdef CONFIG_ARCH_GUMSTIX_ORIG
#define GPIO_GUMSTIX_USB_GPIOn 81
#define GPIO_GUMSTIX_USB_GPIOx 83
#else
#define GPIO_GUMSTIX_USB_GPIOn 35
#define GPIO_GUMSTIX_USB_GPIOx 41
#endif
/* usb state change */
#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
......
arch/arm/mach-pxa/include/mach/hardware.h
浏览文件 @ 0b019a41
......@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
/*
* We requires absolute addresses.
*/
#define PCIO_BASE 0
/*
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
......
arch/arm/mach-pxa/include/mach/palm27x.h 0 → 100644
浏览文件 @ 0b019a41
/*
* Common functions for Palm LD, T5, TX, Z72
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __INCLUDE_MACH_PALM27X__
#define __INCLUDE_MACH_PALM27X__
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
extern void __init palm27x_mmc_init(int detect, int ro, int power,
int power_inverted);
#else
static inline void palm27x_mmc_init(int detect, int ro, int power,
int power_inverted)
{}
#endif
#if defined(CONFIG_SUSPEND)
extern void __init palm27x_pm_init(unsigned long str_base);
#else
static inline void palm27x_pm_init(unsigned long str_base) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
extern struct pxafb_mode_info palm_320x480_lcd_mode;
extern struct pxafb_mode_info palm_320x320_lcd_mode;
extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
extern void __init palm27x_lcd_init(int power,
struct pxafb_mode_info *mode);
#else
static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
#endif
#if defined(CONFIG_USB_GADGET_PXA27X) || \
defined(CONFIG_USB_GADGET_PXA27X_MODULE)
extern void __init palm27x_udc_init(int vbus, int pullup,
int vbus_inverted);
#else
static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
#endif
#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
extern void __init palm27x_irda_init(int pwdn);
#else
static inline void palm27x_irda_init(int pwdn) {}
#endif
#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
int reset);
#else
static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
#endif
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
extern void __init palm27x_pwm_init(int bl, int lcd);
#else
static inline void palm27x_pwm_init(int bl, int lcd) {}
#endif
#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
extern void __init palm27x_power_init(int ac, int usb);
#else
static inline void palm27x_power_init(int ac, int usb) {}
#endif
#if defined(CONFIG_REGULATOR_MAX1586) || \
defined(CONFIG_REGULATOR_MAX1586_MODULE)
extern void __init palm27x_pmic_init(void);
#else
static inline void palm27x_pmic_init(void) {}
#endif
#endif /* __INCLUDE_MACH_PALM27X__ */
arch/arm/mach-pxa/include/mach/pata_pxa.h 0 → 100644
浏览文件 @ 0b019a41
/*
* Generic PXA PATA driver
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __MACH_PATA_PXA_H__
#define __MACH_PATA_PXA_H__
struct pata_pxa_pdata {
/* PXA DMA DREQ<0:2> pin */
uint32_t dma_dreq;
/* Register shift */
uint32_t reg_shift;
/* IRQ flags */
uint32_t irq_flags;
};
#endif /* __MACH_PATA_PXA_H__ */
arch/arm/mach-pxa/include/mach/sharpsl.h 已删除 100644 → 0
浏览文件 @ 5f6878b0
/*
* SharpSL SSP Driver
*/
unsigned long corgi_ssp_ads7846_putget(unsigned long);
unsigned long corgi_ssp_ads7846_get(void);
void corgi_ssp_ads7846_put(unsigned long data);
void corgi_ssp_ads7846_lock(void);
void corgi_ssp_ads7846_unlock(void);
void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
void corgi_ssp_blduty_set(int duty);
int corgi_ssp_max1111_get(unsigned long data);
/*
* SharpSL Touchscreen Driver
*/
struct corgits_machinfo {
unsigned long (*get_hsync_invperiod)(void);
void (*put_hsync)(void);
void (*wait_hsync)(void);
};
/*
* SharpSL Backlight
*/
extern void corgibl_limit_intensity(int limit);
extern void corgi_lcd_limit_intensity(int limit);
/*
* SharpSL Battery/PM Driver
*/
extern void sharpsl_battery_kick(void);
arch/arm/mach-pxa/include/mach/spitz.h
浏览文件 @ 0b019a41
......@@ -185,7 +185,5 @@
/*
* Shared data structures
*/
extern struct platform_device spitzscoop_device;
extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
arch/arm/mach-pxa/mioa701.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palm27x.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palmld.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palmt5.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palmte2.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palmtreo.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palmtx.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/palmz72.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/poodle.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/pxa25x.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/pxa27x.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/pxa3xx.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/raumfeld.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/sharpsl_pm.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/sleep.S
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/spitz.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/spitz_pm.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/stargate2.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/trizeps4.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/vpac270.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-pxa/z2.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/clock.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/dev-audio.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/dev-spi.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/gpiolib.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/s3c6410.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/setup-i2c0.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/setup-i2c1.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/setup-ide.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s3c64xx/setup-keypad.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/cpu.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/dev-audio.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/dev-spi.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/gpio.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/setup-i2c0.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6440/setup-i2c1.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6442/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6442/clock.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6442/dev-audio.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5p6442/dev-spi.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/clock.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/cpu.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/dev-audio.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/dev-spi.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/setup-ide.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/setup-keypad.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pc100/setup-sdhci.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/cpu.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/dev-audio.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/dev-onenand.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/dev-spi.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/gpiolib.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/mach-aquila.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/setup-i2c0.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/setup-i2c1.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/setup-i2c2.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/setup-ide.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/setup-keypad.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv210/setup-sdhci.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/Kconfig 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/Makefile 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/Makefile.boot 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/clock.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/cpu.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/headsmp.S 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/debug-macro.S 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/entry-macro.S 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/gpio.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/hardware.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/io.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/irqs.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/map.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/memory.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/pwm-clock.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/regs-clock.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/regs-irq.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/smp.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/system.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/timex.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/uncompress.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/vmalloc.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/init.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/irq-combiner.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/mach-smdkv310.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/mach-universal_c210.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/platsmp.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c0.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c1.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c2.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-s5pv310/time.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-shmobile/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-shmobile/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-shmobile/clock-sh7372.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-shmobile/clock-sh7377.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-shmobile/clock.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mach-shmobile/pfc-sh7372.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/mm/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-pxa/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-pxa/pmu.c 已删除 100644 → 0
浏览文件 @ 5f6878b0
此差异已折叠。
arch/arm/plat-s5p/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/cpu.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/dev-fimc0.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/dev-fimc1.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/dev-fimc2.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/dev-pmu.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/include/plat/reset.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/include/plat/s5pv310.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/include/plat/system-reset.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-s5p/irq.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc1.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc2.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc3.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-ide.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-keypad.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/dev-wdt.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/gpiolib.c
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/include/plat/adc-core.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/include/plat/ata-core.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/include/plat/ata.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/include/plat/fimc-core.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/include/plat/keypad-core.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/include/plat/regs-ata.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
arch/arm/plat-samsung/platformdata.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
drivers/ata/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/ata/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
drivers/ata/pata_pxa.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
drivers/dma/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/dma/shdma.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/i2c/busses/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/i2c/busses/i2c-sh_mobile.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/net/irda/sh_irda.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/pcmcia/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/pcmcia/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
drivers/pcmcia/pxa2xx_balloon3.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
drivers/power/wm97xx_battery.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/rtc/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/rtc/rtc-s3c.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/serial/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/serial/s5pv210.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/serial/samsung.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/serial/sh-sci.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/serial/sh-sci.h
浏览文件 @ 0b019a41
此差异已折叠。
drivers/sh/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
drivers/sh/clk-cpg.c
浏览文件 @ 0b019a41
此差异已折叠。
drivers/video/Kconfig
浏览文件 @ 0b019a41
此差异已折叠。
drivers/video/Makefile
浏览文件 @ 0b019a41
此差异已折叠。
drivers/video/sh_mipi_dsi.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
drivers/video/sh_mobile_hdmi.c 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
drivers/video/sh_mobile_lcdcfb.c
浏览文件 @ 0b019a41
此差异已折叠。
include/linux/serial_core.h
浏览文件 @ 0b019a41
此差异已折叠。
include/linux/sh_clk.h
浏览文件 @ 0b019a41
此差异已折叠。
include/linux/wm97xx_batt.h 已删除 100644 → 0
浏览文件 @ 5f6878b0
此差异已折叠。
include/video/mipi_display.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
include/video/sh_mipi_dsi.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
include/video/sh_mobile_hdmi.h 0 → 100644
浏览文件 @ 0b019a41
此差异已折叠。
include/video/sh_mobile_lcdc.h
浏览文件 @ 0b019a41
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或