提交 091cf598 编写于 作者: E Eddie Huang 提交者: Matthias Brugger

arm64: dts: mt8173: Add I2C device node

Add MT8173 I2C device nodes, include I2C controllers and pins.
MT8173 has six I2C controllers, from i2c0 to i2c6, exclude i2c5.
The 6th I2C controller register base doesn't next to 5th I2C,
and there is a hardware between 5th and 6th I2C controller. So
SoC designer name 6th controller as "i2c6", not "i2c5".
Signed-off-by: NEddie Huang <eddie.huang@mediatek.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
上级 13421b3e
...@@ -153,11 +153,54 @@ ...@@ -153,11 +153,54 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
};
syscfg_pctl_a: syscfg_pctl_a@10005000 { i2c0_pins_a: i2c0 {
compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; pins1 {
reg = <0 0x10005000 0 0x1000>; pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
<MT8173_PIN_46_SCL0__FUNC_SCL0>;
bias-disable;
};
};
i2c1_pins_a: i2c1 {
pins1 {
pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
<MT8173_PIN_126_SCL1__FUNC_SCL1>;
bias-disable;
};
};
i2c2_pins_a: i2c2 {
pins1 {
pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
<MT8173_PIN_44_SCL2__FUNC_SCL2>;
bias-disable;
};
};
i2c3_pins_a: i2c3 {
pins1 {
pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
<MT8173_PIN_107_SCL3__FUNC_SCL3>;
bias-disable;
};
};
i2c4_pins_a: i2c4 {
pins1 {
pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
<MT8173_PIN_134_SCL4__FUNC_SCL4>;
bias-disable;
};
};
i2c6_pins_a: i2c6 {
pins1 {
pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
<MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
bias-disable;
};
};
}; };
watchdog: watchdog@10007000 { watchdog: watchdog@10007000 {
...@@ -244,6 +287,102 @@ ...@@ -244,6 +287,102 @@
clock-names = "baud", "bus"; clock-names = "baud", "bus";
status = "disabled"; status = "disabled";
}; };
i2c0: i2c@11007000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11007000 0 0x70>,
<0 0x11000100 0 0x80>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
clock-div = <16>;
clocks = <&pericfg CLK_PERI_I2C0>,
<&pericfg CLK_PERI_AP_DMA>;
clock-names = "main", "dma";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@11008000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11008000 0 0x70>,
<0 0x11000180 0 0x80>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
clock-div = <16>;
clocks = <&pericfg CLK_PERI_I2C1>,
<&pericfg CLK_PERI_AP_DMA>;
clock-names = "main", "dma";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@11009000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11009000 0 0x70>,
<0 0x11000200 0 0x80>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
clock-div = <16>;
clocks = <&pericfg CLK_PERI_I2C2>,
<&pericfg CLK_PERI_AP_DMA>;
clock-names = "main", "dma";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c3@11010000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11010000 0 0x70>,
<0 0x11000280 0 0x80>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
clock-div = <16>;
clocks = <&pericfg CLK_PERI_I2C3>,
<&pericfg CLK_PERI_AP_DMA>;
clock-names = "main", "dma";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c4@11011000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11011000 0 0x70>,
<0 0x11000300 0 0x80>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
clock-div = <16>;
clocks = <&pericfg CLK_PERI_I2C4>,
<&pericfg CLK_PERI_AP_DMA>;
clock-names = "main", "dma";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c6: i2c6@11013000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11013000 0 0x70>,
<0 0x11000080 0 0x80>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
clock-div = <16>;
clocks = <&pericfg CLK_PERI_I2C6>,
<&pericfg CLK_PERI_AP_DMA>;
clock-names = "main", "dma";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_pins_a>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
}; };
}; };
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册