[media] dvb-frontends/cxd2841er: TS_SERIAL config flag

Some constellations work/need a serial TS transport mode. This adds a flag
that will toggle set up of such mode.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Acked-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/dvb-frontends/cxd2841er.c

@@ -910,6 +910,18 @@ static void cxd2841er_set_ts_clock_mode(struct cxd2841er_priv *priv,
 	dev_dbg(&priv->i2c->dev, "%s(): ser_ts=0x%02x rate_ctrl_off=0x%02x in_off=0x%02x\n",
 		__func__, serial_ts, ts_rate_ctrl_off, ts_in_off);
 
+	/*
+	 * slave    Bank    Addr    Bit    default    Name
+	 * <SLV-T>  00h     C4h     [1:0]  2'b??      OSERCKMODE
+	 */
+	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc4,
+		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x01 : 0x00), 0x03);
+	/*
+	 * slave    Bank    Addr    Bit    default    Name
+	 * <SLV-T>  00h     D1h     [1:0]  2'b??      OSERDUTYMODE
+	 */
+	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd1,
+		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x01 : 0x00), 0x03);
 	/*
 	 * slave    Bank    Addr    Bit    default    Name
 	 * <SLV-T>  00h     D9h     [7:0]  8'h08      OTSCKPERIOD
@@ -925,7 +937,8 @@ static void cxd2841er_set_ts_clock_mode(struct cxd2841er_priv *priv,
 	 * slave    Bank    Addr    Bit    default    Name
 	 * <SLV-T>  00h     33h     [1:0]  2'b01      OREG_CKSEL_TSIF
 	 */
-	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x33, 0x00, 0x03);
+	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x33,
+		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x01 : 0x00), 0x03);
 	/*
 	 * Enable TS IF Clock
 	 * slave    Bank    Addr    Bit    default    Name
@@ -3745,7 +3758,8 @@ static int cxd2841er_init_tc(struct dvb_frontend *fe)
 	cxd2841er_write_reg(priv, I2C_SLVT, 0xcd, 0x50);
 	/* SONY_DEMOD_CONFIG_PARALLEL_SEL = 1 */
 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00);
-	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc4, 0x00, 0x80);
+	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc4,
+		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x80 : 0x00), 0x80);
 
 	cxd2841er_init_stats(fe);
 

drivers/media/dvb-frontends/cxd2841er.h

@@ -24,8 +24,9 @@
 
 #include <linux/dvb/frontend.h>
 
-#define CXD2841ER_USE_GATECTRL	1
-#define CXD2841ER_AUTO_IFHZ	2
+#define CXD2841ER_USE_GATECTRL	1	/* bit 0 */
+#define CXD2841ER_AUTO_IFHZ	2	/* bit 1 */
+#define CXD2841ER_TS_SERIAL	4	/* bit 2 */
 
 enum cxd2841er_xtal {
 	SONY_XTAL_20500, /* 20.5 MHz */