ide-io.c 23.8 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
/*
 *	IDE I/O functions
 *
 *	Basic PIO and command management functionality.
 *
 * This code was split off from ide.c. See ide.c for history and original
 * copyrights.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * For the avoidance of doubt the "preferred form" of this code is one which
 * is in an open non patent encumbered format. Where cryptographic key signing
 * forms part of the process of creating an executable the information
 * including keys needed to generate an equivalently functional executable
 * are deemed to be part of the source code.
 */
 
 
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/blkpg.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/completion.h>
#include <linux/reboot.h>
#include <linux/cdrom.h>
#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/kmod.h>
#include <linux/scatterlist.h>
J
Jiri Slaby 已提交
50
#include <linux/bitops.h>
L
Linus Torvalds 已提交
51 52 53 54 55 56

#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/io.h>

57 58
int ide_end_rq(ide_drive_t *drive, struct request *rq, int uptodate,
	       unsigned int nr_bytes)
L
Linus Torvalds 已提交
59
{
60 61 62 63
	int error = 0;

	if (uptodate <= 0)
		error = uptodate ? uptodate : -EIO;
L
Linus Torvalds 已提交
64 65 66 67 68

	/*
	 * if failfast is set on a request, override number of sectors and
	 * complete the whole request right now
	 */
69
	if (blk_noretry_request(rq) && error)
70
		nr_bytes = rq->hard_nr_sectors << 9;
L
Linus Torvalds 已提交
71

72
	if (!blk_fs_request(rq) && error && !rq->errors)
L
Linus Torvalds 已提交
73 74 75 76 77 78
		rq->errors = -EIO;

	/*
	 * decide whether to reenable DMA -- 3 is a random magic for now,
	 * if we DMA timeout more than 3 times, just stay in PIO
	 */
79 80 81
	if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
	    drive->retry_pio <= 3) {
		drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
82
		ide_dma_on(drive);
L
Linus Torvalds 已提交
83 84
	}

85
	return blk_end_request(rq, error, nr_bytes);
L
Linus Torvalds 已提交
86
}
87
EXPORT_SYMBOL_GPL(ide_end_rq);
L
Linus Torvalds 已提交
88 89 90 91 92 93 94 95 96 97 98 99 100 101

/**
 *	ide_end_request		-	complete an IDE I/O
 *	@drive: IDE device for the I/O
 *	@uptodate:
 *	@nr_sectors: number of sectors completed
 *
 *	This is our end_request wrapper function. We complete the I/O
 *	update random number input and dequeue the request, which if
 *	it was tagged may be out of order.
 */

int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
{
102
	unsigned int nr_bytes = nr_sectors << 9;
103
	struct request *rq = drive->hwif->rq;
104
	int rc;
L
Linus Torvalds 已提交
105

106 107 108 109 110 111
	if (!nr_bytes) {
		if (blk_pc_request(rq))
			nr_bytes = rq->data_len;
		else
			nr_bytes = rq->hard_cur_sectors << 9;
	}
L
Linus Torvalds 已提交
112

113 114 115
	rc = ide_end_rq(drive, rq, uptodate, nr_bytes);
	if (rc == 0)
		drive->hwif->rq = NULL;
116

117
	return rc;
A
Alan Cox 已提交
118
}
119
EXPORT_SYMBOL(ide_end_request);
A
Alan Cox 已提交
120

121
void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
122
{
123 124
	struct ide_taskfile *tf = &cmd->tf;
	struct request *rq = cmd->rq;
125
	u8 tf_cmd = tf->command;
126 127 128 129

	tf->error = err;
	tf->status = stat;

130
	drive->hwif->tp_ops->tf_read(drive, cmd);
131

132 133 134 135 136 137 138 139 140 141
	if ((cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) &&
	    tf_cmd == ATA_CMD_IDLEIMMEDIATE) {
		if (tf->lbal != 0xc4) {
			printk(KERN_ERR "%s: head unload failed!\n",
			       drive->name);
			ide_tf_dump(drive->name, tf);
		} else
			drive->dev_flags |= IDE_DFLAG_PARKED;
	}

142
	if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
143
		memcpy(rq->special, cmd, sizeof(*cmd));
144

145 146
	if (cmd->tf_flags & IDE_TFLAG_DYN)
		kfree(cmd);
147 148
}

149
void ide_complete_rq(ide_drive_t *drive, u8 err)
L
Linus Torvalds 已提交
150
{
151 152
	ide_hwif_t *hwif = drive->hwif;
	struct request *rq = hwif->rq;
L
Linus Torvalds 已提交
153

154
	hwif->rq = NULL;
155

L
Linus Torvalds 已提交
156
	rq->errors = err;
157

158 159
	if (unlikely(blk_end_request(rq, (rq->errors ? -EIO : 0),
				     blk_rq_bytes(rq))))
160
		BUG();
L
Linus Torvalds 已提交
161
}
162
EXPORT_SYMBOL(ide_complete_rq);
L
Linus Torvalds 已提交
163

164
void ide_kill_rq(ide_drive_t *drive, struct request *rq)
L
Linus Torvalds 已提交
165
{
166 167 168
	u8 drv_req = blk_special_request(rq) && rq->rq_disk;
	u8 media = drive->media;

169 170
	drive->failed_pc = NULL;

171
	if ((media == ide_floppy && drv_req) || media == ide_tape)
172 173
		rq->errors = IDE_DRV_ERROR_GENERAL;

174 175 176
	if ((media == ide_floppy || media == ide_tape) && drv_req)
		ide_complete_rq(drive, 0);
	else
L
Linus Torvalds 已提交
177 178 179
		ide_end_request(drive, 0, 0);
}

180
static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
L
Linus Torvalds 已提交
181
{
182 183 184 185
	tf->nsect   = drive->sect;
	tf->lbal    = drive->sect;
	tf->lbam    = drive->cyl;
	tf->lbah    = drive->cyl >> 8;
186
	tf->device  = (drive->head - 1) | drive->select;
187
	tf->command = ATA_CMD_INIT_DEV_PARAMS;
L
Linus Torvalds 已提交
188 189
}

190
static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
L
Linus Torvalds 已提交
191
{
192
	tf->nsect   = drive->sect;
193
	tf->command = ATA_CMD_RESTORE;
L
Linus Torvalds 已提交
194 195
}

196
static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
L
Linus Torvalds 已提交
197
{
198
	tf->nsect   = drive->mult_req;
199
	tf->command = ATA_CMD_SET_MULTI;
L
Linus Torvalds 已提交
200 201 202 203 204
}

static ide_startstop_t ide_disk_special(ide_drive_t *drive)
{
	special_t *s = &drive->special;
205
	struct ide_cmd cmd;
L
Linus Torvalds 已提交
206

207
	memset(&cmd, 0, sizeof(cmd));
208
	cmd.protocol = ATA_PROT_NODATA;
L
Linus Torvalds 已提交
209 210 211

	if (s->b.set_geometry) {
		s->b.set_geometry = 0;
212
		ide_tf_set_specify_cmd(drive, &cmd.tf);
L
Linus Torvalds 已提交
213 214
	} else if (s->b.recalibrate) {
		s->b.recalibrate = 0;
215
		ide_tf_set_restore_cmd(drive, &cmd.tf);
L
Linus Torvalds 已提交
216 217
	} else if (s->b.set_multmode) {
		s->b.set_multmode = 0;
218
		ide_tf_set_setmult_cmd(drive, &cmd.tf);
L
Linus Torvalds 已提交
219 220 221 222 223 224 225
	} else if (s->all) {
		int special = s->all;
		s->all = 0;
		printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
		return ide_stopped;
	}

226 227
	cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE |
		       IDE_TFLAG_CUSTOM_HANDLER;
228

229
	do_rw_taskfile(drive, &cmd);
L
Linus Torvalds 已提交
230 231 232 233 234 235 236 237

	return ide_started;
}

/**
 *	do_special		-	issue some special commands
 *	@drive: drive the command is for
 *
238 239 240 241
 *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
 *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
 *
 *	It used to do much more, but has been scaled back.
L
Linus Torvalds 已提交
242 243 244 245 246 247 248 249 250
 */

static ide_startstop_t do_special (ide_drive_t *drive)
{
	special_t *s = &drive->special;

#ifdef DEBUG
	printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
251 252
	if (drive->media == ide_disk)
		return ide_disk_special(drive);
L
Linus Torvalds 已提交
253

254 255 256
	s->all = 0;
	drive->mult_req = 0;
	return ide_stopped;
L
Linus Torvalds 已提交
257 258 259 260 261
}

void ide_map_sg(ide_drive_t *drive, struct request *rq)
{
	ide_hwif_t *hwif = drive->hwif;
262
	struct ide_cmd *cmd = &hwif->cmd;
L
Linus Torvalds 已提交
263 264
	struct scatterlist *sg = hwif->sg_table;

265
	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
L
Linus Torvalds 已提交
266
		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
267
		cmd->sg_nents = 1;
268 269
	} else if (!rq->bio) {
		sg_init_one(sg, rq->data, rq->data_len);
270 271 272
		cmd->sg_nents = 1;
	} else
		cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
L
Linus Torvalds 已提交
273 274 275
}
EXPORT_SYMBOL_GPL(ide_map_sg);

276
void ide_init_sg_cmd(struct ide_cmd *cmd, int nsect)
L
Linus Torvalds 已提交
277
{
278 279 280
	cmd->nsect = cmd->nleft = nsect;
	cmd->cursg_ofs = 0;
	cmd->cursg = NULL;
L
Linus Torvalds 已提交
281 282 283 284 285
}
EXPORT_SYMBOL_GPL(ide_init_sg_cmd);

/**
 *	execute_drive_command	-	issue special drive command
286
 *	@drive: the drive to issue the command on
L
Linus Torvalds 已提交
287 288 289 290 291 292 293 294 295 296 297 298
 *	@rq: the request structure holding the command
 *
 *	execute_drive_cmd() issues a special drive command,  usually 
 *	initiated by ioctl() from the external hdparm program. The
 *	command can be a drive command, drive task or taskfile 
 *	operation. Weirdly you can call it with NULL to wait for
 *	all commands to finish. Don't do this as that is due to change
 */

static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
		struct request *rq)
{
299
	struct ide_cmd *cmd = rq->special;
L
Linus Torvalds 已提交
300

301
	if (cmd) {
302
		if (cmd->protocol == ATA_PROT_PIO) {
303
			ide_init_sg_cmd(cmd, rq->nr_sectors);
L
Linus Torvalds 已提交
304 305
			ide_map_sg(drive, rq);
		}
306

307
		return do_rw_taskfile(drive, cmd);
308 309
	}

L
Linus Torvalds 已提交
310 311 312 313 314 315 316
 	/*
 	 * NULL is actually a valid way of waiting for
 	 * all current requests to be flushed from the queue.
 	 */
#ifdef DEBUG
 	printk("%s: DRIVE_CMD (null)\n", drive->name);
#endif
317
	ide_complete_rq(drive, 0);
318

L
Linus Torvalds 已提交
319
 	return ide_stopped;
320 321
}

322 323
static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
324 325 326
	u8 cmd = rq->cmd[0];

	switch (cmd) {
327 328 329
	case REQ_PARK_HEADS:
	case REQ_UNPARK_HEADS:
		return ide_do_park_unpark(drive, rq);
330
	case REQ_DEVSET_EXEC:
331
		return ide_do_devset(drive, rq);
332 333 334
	case REQ_DRIVE_RESET:
		return ide_do_reset(drive);
	default:
335
		BUG();
336 337 338
	}
}

L
Linus Torvalds 已提交
339 340 341 342
/**
 *	start_request	-	start of I/O and command issuing for IDE
 *
 *	start_request() initiates handling of a new I/O request. It
343
 *	accepts commands and I/O (read/write) requests.
L
Linus Torvalds 已提交
344 345 346 347 348 349 350 351
 *
 *	FIXME: this function needs a rename
 */
 
static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
{
	ide_startstop_t startstop;

352
	BUG_ON(!blk_rq_started(rq));
L
Linus Torvalds 已提交
353 354 355

#ifdef DEBUG
	printk("%s: start_request: current=0x%08lx\n",
356
		drive->hwif->name, (unsigned long) rq);
L
Linus Torvalds 已提交
357 358 359 360
#endif

	/* bail early if we've exceeded max_failures */
	if (drive->max_failures && (drive->failures > drive->max_failures)) {
361
		rq->cmd_flags |= REQ_FAILED;
L
Linus Torvalds 已提交
362 363 364
		goto kill_rq;
	}

365 366
	if (blk_pm_request(rq))
		ide_check_pm_state(drive, rq);
L
Linus Torvalds 已提交
367 368

	SELECT_DRIVE(drive);
369 370
	if (ide_wait_stat(&startstop, drive, drive->ready_stat,
			  ATA_BUSY | ATA_DRQ, WAIT_READY)) {
L
Linus Torvalds 已提交
371 372 373 374
		printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
		return startstop;
	}
	if (!drive->special.all) {
375
		struct ide_driver *drv;
L
Linus Torvalds 已提交
376

377 378 379 380 381 382 383
		/*
		 * We reset the drive so we need to issue a SETFEATURES.
		 * Do it _after_ do_special() restored device parameters.
		 */
		if (drive->current_speed == 0xff)
			ide_config_drive_speed(drive, drive->desired_speed);

384
		if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
L
Linus Torvalds 已提交
385 386
			return execute_drive_cmd(drive, rq);
		else if (blk_pm_request(rq)) {
387
			struct request_pm_state *pm = rq->data;
L
Linus Torvalds 已提交
388 389
#ifdef DEBUG_PM
			printk("%s: start_power_step(step: %d)\n",
390
				drive->name, pm->pm_step);
L
Linus Torvalds 已提交
391 392 393
#endif
			startstop = ide_start_power_step(drive, rq);
			if (startstop == ide_stopped &&
394
			    pm->pm_step == IDE_PM_COMPLETED)
395
				ide_complete_pm_rq(drive, rq);
L
Linus Torvalds 已提交
396
			return startstop;
397 398 399 400 401 402 403 404 405 406
		} else if (!rq->rq_disk && blk_special_request(rq))
			/*
			 * TODO: Once all ULDs have been modified to
			 * check for specific op codes rather than
			 * blindly accepting any special request, the
			 * check for ->rq_disk above may be replaced
			 * by a more suitable mechanism or even
			 * dropped entirely.
			 */
			return ide_special_rq(drive, rq);
L
Linus Torvalds 已提交
407

408
		drv = *(struct ide_driver **)rq->rq_disk->private_data;
409 410

		return drv->do_request(drive, rq, rq->sector);
L
Linus Torvalds 已提交
411 412 413 414 415 416 417 418 419 420 421 422 423
	}
	return do_special(drive);
kill_rq:
	ide_kill_rq(drive, rq);
	return ide_stopped;
}

/**
 *	ide_stall_queue		-	pause an IDE device
 *	@drive: drive to stall
 *	@timeout: time to stall for (jiffies)
 *
 *	ide_stall_queue() can be used by a drive to give excess bandwidth back
424
 *	to the port by sleeping for timeout jiffies.
L
Linus Torvalds 已提交
425 426 427 428 429 430 431
 */
 
void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
{
	if (timeout > WAIT_WORSTCASE)
		timeout = WAIT_WORSTCASE;
	drive->sleep = timeout + jiffies;
B
Bartlomiej Zolnierkiewicz 已提交
432
	drive->dev_flags |= IDE_DFLAG_SLEEPING;
L
Linus Torvalds 已提交
433 434 435
}
EXPORT_SYMBOL(ide_stall_queue);

436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457
static inline int ide_lock_port(ide_hwif_t *hwif)
{
	if (hwif->busy)
		return 1;

	hwif->busy = 1;

	return 0;
}

static inline void ide_unlock_port(ide_hwif_t *hwif)
{
	hwif->busy = 0;
}

static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif)
{
	int rc = 0;

	if (host->host_flags & IDE_HFLAG_SERIALIZE) {
		rc = test_and_set_bit_lock(IDE_HOST_BUSY, &host->host_busy);
		if (rc == 0) {
458 459
			if (host->get_lock)
				host->get_lock(ide_intr, hwif);
460 461 462 463 464 465 466 467
		}
	}
	return rc;
}

static inline void ide_unlock_host(struct ide_host *host)
{
	if (host->host_flags & IDE_HFLAG_SERIALIZE) {
468 469
		if (host->release_lock)
			host->release_lock();
470 471 472 473
		clear_bit_unlock(IDE_HOST_BUSY, &host->host_busy);
	}
}

L
Linus Torvalds 已提交
474
/*
475
 * Issue a new request to a device.
L
Linus Torvalds 已提交
476
 */
477
void do_ide_request(struct request_queue *q)
L
Linus Torvalds 已提交
478
{
479 480
	ide_drive_t	*drive = q->queuedata;
	ide_hwif_t	*hwif = drive->hwif;
481 482
	struct ide_host *host = hwif->host;
	struct request	*rq = NULL;
L
Linus Torvalds 已提交
483 484
	ide_startstop_t	startstop;

485 486 487 488 489 490
	/*
	 * drive is doing pre-flush, ordered write, post-flush sequence. even
	 * though that is 3 requests, it must be seen as a single transaction.
	 * we must not preempt this drive until that is complete
	 */
	if (blk_queue_flushing(q))
L
Linus Torvalds 已提交
491
		/*
492 493 494
		 * small race where queue could get replugged during
		 * the 3-request flush cycle, just yank the plug since
		 * we want it to finish asap
L
Linus Torvalds 已提交
495
		 */
496
		blk_remove_plug(q);
L
Linus Torvalds 已提交
497

498
	spin_unlock_irq(q->queue_lock);
499 500 501 502

	if (ide_lock_host(host, hwif))
		goto plug_device_2;

503
	spin_lock_irq(&hwif->lock);
504

505
	if (!ide_lock_port(hwif)) {
506
		ide_hwif_t *prev_port;
507
repeat:
508
		prev_port = hwif->host->cur_port;
509
		hwif->rq = NULL;
510

511 512
		if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
			if (time_before(drive->sleep, jiffies)) {
513
				ide_unlock_port(hwif);
514 515 516
				goto plug_device;
			}
		}
517

518 519
		if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) &&
		    hwif != prev_port) {
520
			/*
521
			 * set nIEN for previous port, drives in the
522 523
			 * quirk_list may not like intr setups/cleanups
			 */
524
			if (prev_port && prev_port->cur_dev->quirk_list == 0)
525
				prev_port->tp_ops->set_irq(prev_port, 0);
526 527

			hwif->host->cur_port = hwif;
L
Linus Torvalds 已提交
528
		}
529
		hwif->cur_dev = drive;
530
		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
L
Linus Torvalds 已提交
531

532
		spin_unlock_irq(&hwif->lock);
533
		spin_lock_irq(q->queue_lock);
L
Linus Torvalds 已提交
534 535 536 537 538
		/*
		 * we know that the queue isn't empty, but this can happen
		 * if the q->prep_rq_fn() decides to kill a request
		 */
		rq = elv_next_request(drive->queue);
539
		spin_unlock_irq(q->queue_lock);
540
		spin_lock_irq(&hwif->lock);
541

L
Linus Torvalds 已提交
542
		if (!rq) {
543
			ide_unlock_port(hwif);
544
			goto out;
L
Linus Torvalds 已提交
545 546 547 548 549 550 551 552 553 554 555 556 557 558 559
		}

		/*
		 * Sanity: don't accept a request that isn't a PM request
		 * if we are currently power managed. This is very important as
		 * blk_stop_queue() doesn't prevent the elv_next_request()
		 * above to return us whatever is in the queue. Since we call
		 * ide_do_request() ourselves, we end up taking requests while
		 * the queue is blocked...
		 * 
		 * We let requests forced at head of queue with ide-preempt
		 * though. I hope that doesn't happen too much, hopefully not
		 * unless the subdriver triggers such a thing in its own PM
		 * state machine.
		 */
B
Bartlomiej Zolnierkiewicz 已提交
560 561 562
		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
		    blk_pm_request(rq) == 0 &&
		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
563
			/* there should be no pending command at this point */
564
			ide_unlock_port(hwif);
565
			goto plug_device;
L
Linus Torvalds 已提交
566 567
		}

568
		hwif->rq = rq;
L
Linus Torvalds 已提交
569

570
		spin_unlock_irq(&hwif->lock);
L
Linus Torvalds 已提交
571
		startstop = start_request(drive, rq);
572
		spin_lock_irq(&hwif->lock);
573

574 575 576 577 578
		if (startstop == ide_stopped)
			goto repeat;
	} else
		goto plug_device;
out:
579
	spin_unlock_irq(&hwif->lock);
580 581
	if (rq == NULL)
		ide_unlock_host(host);
582
	spin_lock_irq(q->queue_lock);
583
	return;
L
Linus Torvalds 已提交
584

585
plug_device:
586
	spin_unlock_irq(&hwif->lock);
587 588
	ide_unlock_host(host);
plug_device_2:
589 590 591 592
	spin_lock_irq(q->queue_lock);

	if (!elv_queue_empty(q))
		blk_plug_device(q);
L
Linus Torvalds 已提交
593 594
}

595 596 597 598 599 600 601 602 603 604 605
static void ide_plug_device(ide_drive_t *drive)
{
	struct request_queue *q = drive->queue;
	unsigned long flags;

	spin_lock_irqsave(q->queue_lock, flags);
	if (!elv_queue_empty(q))
		blk_plug_device(q);
	spin_unlock_irqrestore(q->queue_lock, flags);
}

606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628
static int drive_is_ready(ide_drive_t *drive)
{
	ide_hwif_t *hwif = drive->hwif;
	u8 stat = 0;

	if (drive->waiting_for_dma)
		return hwif->dma_ops->dma_test_irq(drive);

	if (hwif->io_ports.ctl_addr &&
	    (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0)
		stat = hwif->tp_ops->read_altstatus(hwif);
	else
		/* Note: this may clear a pending IRQ!! */
		stat = hwif->tp_ops->read_status(hwif);

	if (stat & ATA_BUSY)
		/* drive busy: definitely not interrupting */
		return 0;

	/* drive ready: *might* be interrupting */
	return 1;
}

L
Linus Torvalds 已提交
629 630
/**
 *	ide_timer_expiry	-	handle lack of an IDE interrupt
631
 *	@data: timer callback magic (hwif)
L
Linus Torvalds 已提交
632 633 634 635 636 637 638 639 640 641 642 643 644
 *
 *	An IDE command has timed out before the expected drive return
 *	occurred. At this point we attempt to clean up the current
 *	mess. If the current handler includes an expiry handler then
 *	we invoke the expiry handler, and providing it is happy the
 *	work is done. If that fails we apply generic recovery rules
 *	invoking the handler and checking the drive DMA status. We
 *	have an excessively incestuous relationship with the DMA
 *	logic that wants cleaning up.
 */
 
void ide_timer_expiry (unsigned long data)
{
645
	ide_hwif_t	*hwif = (ide_hwif_t *)data;
646
	ide_drive_t	*uninitialized_var(drive);
L
Linus Torvalds 已提交
647 648
	ide_handler_t	*handler;
	unsigned long	flags;
649
	int		wait = -1;
650
	int		plug_device = 0;
L
Linus Torvalds 已提交
651

652 653 654
	spin_lock_irqsave(&hwif->lock, flags);

	handler = hwif->handler;
L
Linus Torvalds 已提交
655

656
	if (handler == NULL || hwif->req_gen != hwif->req_gen_timer) {
L
Linus Torvalds 已提交
657 658 659 660 661 662 663
		/*
		 * Either a marginal timeout occurred
		 * (got the interrupt just as timer expired),
		 * or we were "sleeping" to give other devices a chance.
		 * Either way, we don't really want to complain about anything.
		 */
	} else {
664 665 666
		ide_expiry_t *expiry = hwif->expiry;
		ide_startstop_t startstop = ide_stopped;

667
		drive = hwif->cur_dev;
668 669 670 671 672 673 674 675 676 677

		if (expiry) {
			wait = expiry(drive);
			if (wait > 0) { /* continue */
				/* reset timer */
				hwif->timer.expires = jiffies + wait;
				hwif->req_gen_timer = hwif->req_gen;
				add_timer(&hwif->timer);
				spin_unlock_irqrestore(&hwif->lock, flags);
				return;
678
			}
L
Linus Torvalds 已提交
679
		}
680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695
		hwif->handler = NULL;
		/*
		 * We need to simulate a real interrupt when invoking
		 * the handler() function, which means we need to
		 * globally mask the specific IRQ:
		 */
		spin_unlock(&hwif->lock);
		/* disable_irq_nosync ?? */
		disable_irq(hwif->irq);
		/* local CPU only, as if we were handling an interrupt */
		local_irq_disable();
		if (hwif->polling) {
			startstop = handler(drive);
		} else if (drive_is_ready(drive)) {
			if (drive->waiting_for_dma)
				hwif->dma_ops->dma_lost_irq(drive);
696 697
			if (hwif->ack_intr)
				hwif->ack_intr(hwif);
698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713
			printk(KERN_WARNING "%s: lost interrupt\n",
				drive->name);
			startstop = handler(drive);
		} else {
			if (drive->waiting_for_dma)
				startstop = ide_dma_timeout_retry(drive, wait);
			else
				startstop = ide_error(drive, "irq timeout",
					hwif->tp_ops->read_status(hwif));
		}
		spin_lock_irq(&hwif->lock);
		enable_irq(hwif->irq);
		if (startstop == ide_stopped) {
			ide_unlock_port(hwif);
			plug_device = 1;
		}
L
Linus Torvalds 已提交
714
	}
715
	spin_unlock_irqrestore(&hwif->lock, flags);
716

717 718
	if (plug_device) {
		ide_unlock_host(hwif->host);
719
		ide_plug_device(drive);
720
	}
L
Linus Torvalds 已提交
721 722 723 724 725
}

/**
 *	unexpected_intr		-	handle an unexpected IDE interrupt
 *	@irq: interrupt line
726
 *	@hwif: port being processed
L
Linus Torvalds 已提交
727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750
 *
 *	There's nothing really useful we can do with an unexpected interrupt,
 *	other than reading the status register (to clear it), and logging it.
 *	There should be no way that an irq can happen before we're ready for it,
 *	so we needn't worry much about losing an "important" interrupt here.
 *
 *	On laptops (and "green" PCs), an unexpected interrupt occurs whenever
 *	the drive enters "idle", "standby", or "sleep" mode, so if the status
 *	looks "good", we just ignore the interrupt completely.
 *
 *	This routine assumes __cli() is in effect when called.
 *
 *	If an unexpected interrupt happens on irq15 while we are handling irq14
 *	and if the two interfaces are "serialized" (CMD640), then it looks like
 *	we could screw up by interfering with a new request being set up for 
 *	irq15.
 *
 *	In reality, this is a non-issue.  The new command is not sent unless 
 *	the drive is ready to accept one, in which case we know the drive is
 *	not trying to interrupt us.  And ide_set_handler() is always invoked
 *	before completing the issuance of any new drive command, so we will not
 *	be accidentally invoked as a result of any valid command completion
 *	interrupt.
 */
751 752

static void unexpected_intr(int irq, ide_hwif_t *hwif)
L
Linus Torvalds 已提交
753
{
754 755 756 757 758 759 760 761 762 763 764 765
	u8 stat = hwif->tp_ops->read_status(hwif);

	if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
		/* Try to not flood the console with msgs */
		static unsigned long last_msgtime, count;
		++count;

		if (time_after(jiffies, last_msgtime + HZ)) {
			last_msgtime = jiffies;
			printk(KERN_ERR "%s: unexpected interrupt, "
				"status=0x%02x, count=%ld\n",
				hwif->name, stat, count);
L
Linus Torvalds 已提交
766
		}
767
	}
L
Linus Torvalds 已提交
768 769 770 771 772
}

/**
 *	ide_intr	-	default IDE interrupt handler
 *	@irq: interrupt number
773
 *	@dev_id: hwif
L
Linus Torvalds 已提交
774 775 776 777 778 779
 *	@regs: unused weirdness from the kernel irq layer
 *
 *	This is the default IRQ handler for the IDE layer. You should
 *	not need to override it. If you do be aware it is subtle in
 *	places
 *
780
 *	hwif is the interface in the group currently performing
781
 *	a command. hwif->cur_dev is the drive and hwif->handler is
L
Linus Torvalds 已提交
782 783 784 785 786 787 788 789 790 791
 *	the IRQ handler to call. As we issue a command the handlers
 *	step through multiple states, reassigning the handler to the
 *	next step in the process. Unlike a smart SCSI controller IDE
 *	expects the main processor to sequence the various transfer
 *	stages. We also manage a poll timer to catch up with most
 *	timeout situations. There are still a few where the handlers
 *	don't ever decide to give up.
 *
 *	The handler eventually returns ide_stopped to indicate the
 *	request completed. At this point we issue the next request
792
 *	on the port and the process begins again.
L
Linus Torvalds 已提交
793
 */
794

795
irqreturn_t ide_intr (int irq, void *dev_id)
L
Linus Torvalds 已提交
796
{
797
	ide_hwif_t *hwif = (ide_hwif_t *)dev_id;
798
	struct ide_host *host = hwif->host;
799
	ide_drive_t *uninitialized_var(drive);
L
Linus Torvalds 已提交
800
	ide_handler_t *handler;
801
	unsigned long flags;
L
Linus Torvalds 已提交
802
	ide_startstop_t startstop;
803
	irqreturn_t irq_ret = IRQ_NONE;
804
	int plug_device = 0;
L
Linus Torvalds 已提交
805

806 807
	if (host->host_flags & IDE_HFLAG_SERIALIZE) {
		if (hwif != host->cur_port)
808 809
			goto out_early;
	}
810

811
	spin_lock_irqsave(&hwif->lock, flags);
L
Linus Torvalds 已提交
812

813
	if (hwif->ack_intr && hwif->ack_intr(hwif) == 0)
814
		goto out;
L
Linus Torvalds 已提交
815

816 817 818
	handler = hwif->handler;

	if (handler == NULL || hwif->polling) {
L
Linus Torvalds 已提交
819 820 821 822 823 824 825 826 827 828 829 830
		/*
		 * Not expecting an interrupt from this drive.
		 * That means this could be:
		 *	(1) an interrupt from another PCI device
		 *	sharing the same PCI INT# as us.
		 * or	(2) a drive just entered sleep or standby mode,
		 *	and is interrupting to let us know.
		 * or	(3) a spurious interrupt of unknown origin.
		 *
		 * For PCI, we cannot tell the difference,
		 * so in that case we just ignore it and hope it goes away.
		 */
831
		if ((host->irq_flags & IRQF_SHARED) == 0) {
L
Linus Torvalds 已提交
832 833 834 835
			/*
			 * Probably not a shared PCI interrupt,
			 * so we can safely try to do something about it:
			 */
836
			unexpected_intr(irq, hwif);
L
Linus Torvalds 已提交
837 838 839 840 841
		} else {
			/*
			 * Whack the status register, just in case
			 * we have a leftover pending IRQ.
			 */
842
			(void)hwif->tp_ops->read_status(hwif);
L
Linus Torvalds 已提交
843
		}
844
		goto out;
L
Linus Torvalds 已提交
845
	}
846

847
	drive = hwif->cur_dev;
848 849

	if (!drive_is_ready(drive))
L
Linus Torvalds 已提交
850 851 852 853 854 855 856
		/*
		 * This happens regularly when we share a PCI IRQ with
		 * another device.  Unfortunately, it can also happen
		 * with some buggy drives that trigger the IRQ before
		 * their status register is up to date.  Hopefully we have
		 * enough advance overhead that the latter isn't a problem.
		 */
857 858
		goto out;

859 860 861 862
	hwif->handler = NULL;
	hwif->req_gen++;
	del_timer(&hwif->timer);
	spin_unlock(&hwif->lock);
L
Linus Torvalds 已提交
863

864 865
	if (hwif->port_ops && hwif->port_ops->clear_irq)
		hwif->port_ops->clear_irq(drive);
866

B
Bartlomiej Zolnierkiewicz 已提交
867
	if (drive->dev_flags & IDE_DFLAG_UNMASK)
868
		local_irq_enable_in_hardirq();
869

L
Linus Torvalds 已提交
870 871 872
	/* service this interrupt, may set handler for next interrupt */
	startstop = handler(drive);

873
	spin_lock_irq(&hwif->lock);
L
Linus Torvalds 已提交
874 875 876 877 878 879 880 881
	/*
	 * Note that handler() may have set things up for another
	 * interrupt to occur soon, but it cannot happen until
	 * we exit from this routine, because it will be the
	 * same irq as is currently being serviced here, and Linux
	 * won't allow another of the same (on any CPU) until we return.
	 */
	if (startstop == ide_stopped) {
882 883 884
		BUG_ON(hwif->handler);
		ide_unlock_port(hwif);
		plug_device = 1;
L
Linus Torvalds 已提交
885
	}
886 887
	irq_ret = IRQ_HANDLED;
out:
888
	spin_unlock_irqrestore(&hwif->lock, flags);
889
out_early:
890 891
	if (plug_device) {
		ide_unlock_host(hwif->host);
892
		ide_plug_device(drive);
893
	}
894

895
	return irq_ret;
L
Linus Torvalds 已提交
896
}
897
EXPORT_SYMBOL_GPL(ide_intr);
L
Linus Torvalds 已提交
898

899 900 901 902 903 904 905
void ide_pad_transfer(ide_drive_t *drive, int write, int len)
{
	ide_hwif_t *hwif = drive->hwif;
	u8 buf[4] = { 0 };

	while (len > 0) {
		if (write)
906
			hwif->tp_ops->output_data(drive, NULL, buf, min(4, len));
907
		else
908
			hwif->tp_ops->input_data(drive, NULL, buf, min(4, len));
909 910 911 912
		len -= 4;
	}
}
EXPORT_SYMBOL_GPL(ide_pad_transfer);