@@ -43,26 +43,26 @@ The setup procedure varies, depending on whether you need a GUI. If you need a G
3. Decompress the DevEco Device Tool software package and assign permission on the folder obtained from the decompression.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.400.zip** to the actual software package name.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.401.zip** to the actual software package name.
```
unzip devicetool-linux-tool-3.0.0.400.zip
unzip devicetool-linux-tool-3.0.0.401.zip
```
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.400.sh** to the actual installation file name.
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.401.sh** to the actual installation file name.
```
chmod u+x devicetool-linux-tool-3.0.0.400.sh
chmod u+x devicetool-linux-tool-3.0.0.401.sh
```
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.400.sh** indicates the installation file name.
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.401.sh** indicates the installation file name.
> During the installation, the setup wizard automatically checks whether Python 3.8 or 3.9 is installed. If Python 3.8 or 3.9 is not installed, the setup wizard displays the "Do you want to continue?" message; enter **Y** to allow the setup wizard to automatically install Python.
```
sudo ./devicetool-linux-tool-3.0.0.400.sh
sudo ./devicetool-linux-tool-3.0.0.401.sh
```
Wait until the "Deveco Device Tool successfully installed." message is displayed.
...
...
@@ -91,14 +91,14 @@ To remotely access the Ubuntu environment through Windows and enjoy the benefits
1. On the **VSCode installation confirm** page, select **Install VScode 1.62.2 automatically** and click **Next**.
> If the command fails to be executed and the system displays a message indicating that the openssh-server and openssh-client depend on different versions, install the openssh-client of the required version (for example, **sudo apt-get install openssh-client=1:8.2p1-4**) as prompted on the command-line interface (CLI) and run the command again to install the openssh-server.
@@ -44,25 +44,25 @@ The setup procedure varies, depending on whether you need a GUI. If you need a G
3. Decompress the DevEco Device Tool software package and assign permission on the folder obtained from the decompression.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.400.zip** to the actual software package name.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.401.zip** to the actual software package name.
```
unzip devicetool-linux-tool-3.0.0.400.zip
unzip devicetool-linux-tool-3.0.0.401.zip
```
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.400.sh** to the actual installation file name.
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.401.sh** to the actual installation file name.
```
chmod u+x devicetool-linux-tool-3.0.0.400.sh
chmod u+x devicetool-linux-tool-3.0.0.401.sh
```
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.400.sh** indicates the installation file name.
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.401.sh** indicates the installation file name.
> During the installation, the setup wizard automatically checks whether Python 3.8 or 3.9 is installed. If Python 3.8 or 3.9 is not installed, the setup wizard displays the "Do you want to continue?" message; enter **Y** to allow the setup wizard to automatically install Python.
```
sudo ./devicetool-linux-tool-3.0.0.400.sh
sudo ./devicetool-linux-tool-3.0.0.401.sh
```
Wait until the "Deveco Device Tool successfully installed." message is displayed.
...
...
@@ -80,7 +80,7 @@ To remotely access the Ubuntu environment through Windows and enjoy the benefits
3. Set the installation path of DevEco Device Tool and click **Next**. You are advised to install DevEco Device Tool in a non-system drive.
> If you have installed DevEco Device Tool 3.0 Beta2 or earlier, the earlier version will be uninstalled before you install a new version. If the following error message is displayed during the uninstallation, click **Ignore** to continue the installation. This error does not affect the installation of the new version.
> If the command fails to be executed and the system displays a message indicating that the openssh-server and openssh-client depend on different versions, install the openssh-client of the required version (for example, **sudo apt-get install openssh-client=1:8.2p1-4**) as prompted on the command-line interface (CLI) and run the command again to install the openssh-server.
1.[Download](https://gitee.com/hihope_iot/docs/blob/master/HiHope_DAYU200/%E7%83%A7%E5%86%99%E5%B7%A5%E5%85%B7%E5%8F%8A%E6%8C%87%E5%8D%97/windows/DriverAssitant_v5.1.1.zip)**DriverInstall.exe**. Double-click **DriverInstall.exe** to open the installer. Then click the install button to install the USB driver as prompted.
> This operation is required only in remote access mode (in the Windows+Ubuntu hybrid build environment). If the local access mode (Windows or Ubuntu build environment) is used, skip this step.
4. In DevEco Device Tool, choose QUICK ACCESS > DevEco Home > Projects, and then click Settings.
...
...
@@ -37,7 +37,7 @@
2. In **Partition Options**, modify the items selected in the preceding step.
> Set the start address and length of the partition based on the size of the files to be burnt. Make sure the size of the partition is greater than that of the files to be burnt and the partition addresses of the files to be burnt do not overlap.
> If the message "The boad is not in Loader mode. Please Hold on the VOL+key..." is displayed, place the development board in Loader mode as follows: Press and hold the Volume+ key for 3 seconds, press the RESET key, wait for 3 seconds, and then release the Volume+ key.
10. Wait until the burning is complete. If the following message is displayed, the burning is successful.
> The preceding command is applicable to Ubuntu 18.04. For other Ubuntu versions, modify the preceding installation command based on the installation package name. Specifically:
>
> - Python 3.8 or a later version is required. This section uses Python 3.8 as an example.
...
...
@@ -52,7 +52,7 @@ On Ubuntu:
To remotely access the Ubuntu environment through Windows to perform operations such as burning, you need to install DevEco Device Tool on both Windows and Ubuntu.
> DevEco Device Tool is a one-stop integrated development environment (IDE) provided for developers of OpenHarmony-powered smart devices. It allows code editing, compiling, burning, and debugging. This document describes how to use DevEco Device Tool to remotely connect to the Ubuntu environment for burning and running.
...
...
@@ -64,7 +64,7 @@ To remotely access the Ubuntu environment through Windows to perform operations
3. Set the installation path of DevEco Device Tool and click **Next**. You are advised to install DevEco Device Tool in a non-system drive.
> If you have installed DevEco Device Tool 3.0 Beta2 or earlier, the earlier version will be uninstalled before you install a new version. If the following error message is displayed during the uninstallation, click **Ignore** to continue the installation. This error does not affect the installation of the new version.
@@ -122,25 +122,25 @@ To remotely access the Ubuntu environment through Windows to perform operations
3. Decompress the DevEco Device Tool software package and assign permission on the folder obtained from the decompression.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.400.zip** to the actual software package name.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.401.zip** to the actual software package name.
```
unzip devicetool-linux-tool-3.0.0.400.zip
unzip devicetool-linux-tool-3.0.0.401.zip
```
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.400.sh** to the actual installation file name.
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.401.sh** to the actual installation file name.
```
chmod u+x devicetool-linux-tool-3.0.0.400.sh
chmod u+x devicetool-linux-tool-3.0.0.401.sh
```
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.400.sh** indicates the installation file name.
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.401.sh** indicates the installation file name.
> During the installation, the setup wizard automatically checks whether Python 3.8 or 3.9 is installed. If Python 3.8 or 3.9 is not installed, the setup wizard displays the "Do you want to continue?" message; enter **Y** to allow the setup wizard to automatically install Python.
```
sudo ./devicetool-linux-tool-3.0.0.400.sh
sudo ./devicetool-linux-tool-3.0.0.401.sh
```
Wait until the "Deveco Device Tool successfully installed." message is displayed.
...
...
@@ -155,7 +155,7 @@ To remotely access the Ubuntu environment through Windows to perform operations
1. In Ubuntu, open the Terminal tool and run the following command to install the SSH service:
> If the command fails to be executed and the system displays a message indicating that the openssh-server and openssh-client depend on different versions, install the openssh-client of the required version (for example, **sudo apt-get install openssh-client=1:8.2p1-4**) as prompted on the command-line interface (CLI) and run the command again to install the openssh-server.
...
...
@@ -280,7 +280,7 @@ In the Ubuntu environment, perform the following steps to obtain the OpenHarmony
> Download the master code if you want to get quick access to the latest features for your development. Download the release code, which is more stable, if you want to develop commercial functionalities.
-**Obtaining OpenHarmony master code**
...
...
@@ -325,7 +325,7 @@ Perform the following steps in Ubuntu:
> When downloading source code under the OpenHarmony_v1.x branches or tags, perform the operation procedure described in this section to install LLVM 9.0.0.
>
> When downloading source code under the Master or non-OpenHarmony_v1.x branches or tags, skip this section. hb will automatically download the latest version of LLVM.
> The preceding command is applicable to Ubuntu 18.04. For other Ubuntu versions, modify the preceding installation command based on the installation package name. Specifically:
>
> - Python 3.8 or a later version is required. This section uses Python 3.8 as an example.
...
...
@@ -51,7 +51,7 @@ In Ubuntu:
To remotely access the Ubuntu environment through Windows to perform operations such as burning, you need to install DevEco Device Tool on both Windows and Ubuntu.
> DevEco Device Tool is a one-stop integrated development environment (IDE) provided for developers of OpenHarmony-powered smart devices. It allows code editing, compiling, burning, and debugging. This document describes how to use DevEco Device Tool to remotely connect to the Ubuntu environment for burning and running.
...
...
@@ -62,7 +62,7 @@ To remotely access the Ubuntu environment through Windows to perform operations
2. Decompress the DevEco Device Tool package, double-click the installer, and then click **Next**.
3. Set the installation path of DevEco Device Tool and click **Next**. You are advised to install DevEco Device Tool in a non-system drive.
> If you have installed DevEco Device Tool 3.0 Beta2 or earlier, the earlier version will be uninstalled before you install a new version. If the following error message is displayed during the uninstallation, click **Ignore** to continue the installation. This error does not affect the installation of the new version.
@@ -115,24 +115,24 @@ To remotely access the Ubuntu environment through Windows to perform operations
2. Download the [DevEco Device Tool 3.0 Release Linux version](https://device.harmonyos.com/cn/ide#download).
3. Decompress the DevEco Device Tool software package and assign permission on the folder obtained from the decompression.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.400.zip** to the actual software package name.
1. Go to the directory where the DevEco Device Tool software package is stored and run the following command to decompress the software package. In the command, change **devicetool-linux-tool-3.0.0.401.zip** to the actual software package name.
```
unzip devicetool-linux-tool-3.0.0.400.zip
unzip devicetool-linux-tool-3.0.0.401.zip
```
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.400.sh** to the actual installation file name.
2. Open the folder of the decompressed software package and run the following command to grant the execute permission on the installation file. In the command, change **devicetool-linux-tool-3.0.0.401.sh** to the actual installation file name.
```
chmod u+x devicetool-linux-tool-3.0.0.400.sh
chmod u+x devicetool-linux-tool-3.0.0.401.sh
```
4. Run the following command to install DevEco Device Tool, where **devicetool-linux-tool-3.0.0.400.sh** indicates the installation file name.
> During the installation, the setup wizard automatically checks whether Python 3.8 or 3.9 is installed. If Python 3.8 or 3.9 is not installed, the setup wizard displays the "Do you want to continue?" message; enter **Y** to allow the setup wizard to automatically install Python.
```
sudo ./devicetool-linux-tool-3.0.0.400.sh
sudo ./devicetool-linux-tool-3.0.0.401.sh
```
Wait until the "Deveco Device Tool successfully installed." message is displayed.
...
...
@@ -146,7 +146,7 @@ To remotely access the Ubuntu environment through Windows to perform operations
### Installing the SSH Service and Obtaining the IP Address for Remote Access
1. In Ubuntu, open the Terminal tool and run the following command to install the SSH service:
> If the command fails to be executed and the system displays a message indicating that the openssh-server and openssh-client depend on different versions, install the openssh-client of the required version (for example, **sudo apt-get install openssh-client=1:8.2p1-4**) as prompted on the command-line interface (CLI) and run the command again to install the openssh-server.
...
...
@@ -269,7 +269,7 @@ In the Ubuntu environment, perform the following steps to obtain the OpenHarmony
> Download the master code if you want to get quick access to the latest features for your development. Download the release code, which is more stable, if you want to develop commercial functionalities.
hb is a compilation tool of OpenHarmony. To install hb in Ubuntu, perform the following steps: For details about the functions of the OpenHarmony compilation and building module, see [Compilation and Building Guidelines](https://gitee.com/openharmony/docs/blob/master/en/device-dev/subsystems/subsys-build.md).
@@ -39,7 +39,7 @@ After the building is complete, ensure that you can [remotely access the Ubuntu
After the source code is imported, perform the following steps:
1.[Download](https://gitee.com/hihope_iot/docs/blob/master/HiHope_DAYU200/%E7%83%A7%E5%86%99%E5%B7%A5%E5%85%B7%E5%8F%8A%E6%8C%87%E5%8D%97/windows/DriverAssitant_v5.1.1.zip)**DriverInstall.exe**. Double-click **DriverInstall.exe** to open the installer. Then click the install button to install the USB driver as prompted.
> This operation is required only in remote access mode (in the Windows+Ubuntu hybrid build environment). If the local access mode (Windows or Ubuntu build environment) is used, skip this step.
4. In DevEco Device Tool, choose QUICK ACCESS > DevEco Home > Projects, and then click Settings.
...
...
@@ -73,7 +73,7 @@ After the source code is imported, perform the following steps:
2. In **Partition Options**, modify the items selected in the preceding step.
> Set the start address and length of the partition based on the size of the files to be burnt. Make sure the size of the partition is greater than that of the files to be burnt and the partition addresses of the files to be burnt do not overlap.
> If the message "The boad is not in Loader mode. Please Hold on the VOL+key..." is displayed, place the development board in Loader mode as follows: Press and hold the Volume+ key for 3 seconds, press the RESET key, wait for 3 seconds, and then release the Volume+ key.
10. Wait until the burning is complete. If the following message is displayed, the burning is successful.
