!4976 【OpenHarmony开源贡献者计划2022】fix: parameter type error

Merge pull request !4976 from rtos_dao/iint32_t

en/device-dev/driver/driver-peripherals-sensor-des.md

@@ -69,7 +69,7 @@ The sensor driver model provides APIs for the hardware service to make sensor se
 | int32_t GetAllSensors(struct SensorInformation **sensorInfo, int32_t *count) | Obtains information about all registered sensors in the system. The sensor information includes the sensor name, sensor vendor, firmware version, hardware version, sensor type ID, sensor ID, maximum range, accuracy, and power consumption.|
 | int32_t Enable(int32_t sensorId) | Enables a sensor. The subscriber can obtain sensor data only after the sensor is enabled.| 
 | int32_t Disable(int32_t sensorId) | Disables a sensor.| 
-| int32_t SetBatch(iint32_t sensorId, int64_t samplingInterval, int64_t reportInterval) | Sets the sampling interval and data reporting interval for a sensor.| 
+| int32_t SetBatch(int32_t sensorId, int64_t samplingInterval, int64_t reportInterval) | Sets the sampling interval and data reporting interval for a sensor.| 
 | int32_t SetMode(int32_t sensorId, int32_t mode) | Sets the data reporting mode for a sensor.| 
 | int32_t SetOption(int32_t sensorId, uint32_t option) | Sets options for a sensor, including its range and accuracy.| 
 | int32_t Register(int32_t groupId, RecordDataCallback cb) | Registers a sensor data callback based on the group ID.| 

zh-cn/device-dev/driver/driver-peripherals-sensor-des.md

@@ -69,7 +69,7 @@ Sensor驱动模型对外开放的API接口能力的具体实现请参考：
 | int32_t GetAllSensors(struct SensorInformation **sensorInfo, int32_t *count) | 获取系统中注册的所有传感器信息，一组完整传感器信息包括传感器名字、设备厂商、固件版本号、硬件版本号、传感器类型编号、传感器标识、最大量程、精度、功耗。 |
 | int32_t Enable(int32_t sensorId) | 使能指定传感器设备，只有数据订阅者使能传感器后，才能获取订阅的传感器数据。 | 
 | int32_t Disable(int32_t sensorId) | 去使能指定传感器设备。 | 
-| int32_t SetBatch(iint32_t sensorId, int64_t samplingInterval, int64_t reportInterval) | 设置指定传感器的数据采样间隔和数据上报间隔。 | 
+| int32_t SetBatch(int32_t sensorId, int64_t samplingInterval, int64_t reportInterval) | 设置指定传感器的数据采样间隔和数据上报间隔。 | 
 | int32_t SetMode(int32_t sensorId, int32_t mode) | 设置指定传感器的工作模式，不同的工作模式，上报数据方式不同。 | 
 | int32_t SetOption(int32_t sensorId, uint32_t option) | 设置指定传感器量程，精度等可选配置。 | 
 | int32_t Register(int32_t groupId, RecordDataCallback cb) | 订阅者根据不同groupId注册传感器数据回调函数，系统会将获取到的传感器数据上报给订阅者。 |