!22490 【4.0-Beta2】翻译完成 21943+22092+21940+22036+22053+21782

Merge pull request !22490 from ester.zhou/C42-0818

en/application-dev/faqs/faqs-arkui-animation-interactive-event.md

@@ -38,8 +38,9 @@ Applicable to: OpenHarmony 3.2 Beta 5 (API version 9)
 
 **Solution**
 
-- Add **focusable\(true\)** to the list item to enable it to obtain focus.
+ Use either of the following:
 
+- Add **focusable\(true\)** to the list item to enable it to obtain focus.
 - Nest a focusable component, for example, **\<Button>**, at the outer layer of each item.
 
 ## Why is the click event not triggered for the focused component upon the press of the Enter key after keyboard navigation?
@@ -139,6 +140,8 @@ Currently, the menu is displayed when the bound component is clicked or long pre
 
 Applicable to: OpenHarmony 3.2 Beta5 (API version 9)
 
+**Solution**
+
 Set the **focusable** attribute of the **\<TextInput>** component to **false**. In this way, the component is not focusable and therefore will not bring up the keyboard.
 
 ## How do I implement the slide up and slide down effect for page transition?
@@ -199,7 +202,7 @@ Applicable to: OpenHarmony 3.2 Beta5 (API version 9)
 
 **Symptom**
 
-Custom components A and B need to deliver the following effects: When custom component A, displayed at the bottom of the screen by default, is touched, it is hidden, and custom component B slides in from the bottom. When custom component B is touched, it is hidden, and custom component A slides in from the bottom.
+Custom components A and B need to deliver the following effects: When custom component A, displayed at the bottom of the screen by default, is touched, it is hidden, and custom component B slides in from the bottom; when custom component B is touched, it is hidden, and custom component A slides in from the bottom.
 
 **Solution**
 
@@ -266,4 +269,4 @@ struct ComponentChild2 {
 
 **Reference**
 
-[Transition Animation Within the Component](../ui/arkts-enter-exit-transition.md)
+[Enter/Exit Transition](../ui/arkts-enter-exit-transition.md)

en/application-dev/reference/arkui-ts/ts-container-columnsplit.md

 # ColumnSplit
 
-The **\<ColumnSplit>** component lays out child components vertically and inserts a horizontal divider between components.
+The **\<ColumnSplit>** component lays out child components vertically and inserts a horizontal divider between every two child components.
 
 >  **NOTE**
 >
 > This component is supported since API version 7. Updates will be marked with a superscript to indicate their earliest API version.
 
-
-
 ## Child Components
 
 Supported
 
-
 ## APIs
 
 ColumnSplit()
@@ -20,17 +17,24 @@ ColumnSplit()
 
 ## Attributes
 
-| Name| Type| Description|
-| -------- | -------- | -------- |
+| Name                  | Type                                                             | Description                            |
+|-----------------------|-------------------------------------------------------------------|---------------------------------|
 | resizeable            | boolean                                                           | Whether the divider can be dragged.<br/>Default value: **false**  |
+| divider<sup>10+</sup> | [ColumnSplitDividerStyle](#columnsplitdividerstyle10) \| null | Margin of the divider.<br>- **DividerStyle**: distance between the divider and the child component above or below it.<br>- Default value: **null**, indicating that the top and bottom margins of the divider are 0.|
+
+## ColumnSplitDividerStyle<sup>10+</sup>
+
+| Name       | Type     | Mandatory| Description                      |
+| ----------- | ------------- | ---- |--------------------------|
+| startMargin | [Dimension](ts-types.md#dimension10)       | No  | Distance between the divider and the child component above it.<br>Default value: **0**|
+| endMargin   | [Dimension](ts-types.md#dimension10)       | No  | Distance between the divider and the child component below it.<br>Default value: **0**|
 
 >  **NOTE**
 >
-> Similar to **\<RowSplit>**, the divider of **\<ColumnSplit>** can be dragged to a position that just fully holds a component.
->
-> Dragging is not supported in the Previewer. Check the drag effect on a real device.
+> Similar to **\<RowSplit>**, the divider of **\<ColumnSplit>** can change the height of the upper and lower child components, but only to the extent that the resultant height falls within the maximum and minimum heights of the child components.
 >
-> The universal attributes **clip** and **margin** are not supported.
+> Universal attributes such as **clip** and **margin** are supported. If **clip** is not set, the default value **true** is used.
+
 
 ## Example
 

en/application-dev/reference/arkui-ts/ts-container-rowsplit.md

 # RowSplit
 
-The **\<RowSplit>** lays out child components horizontally and inserts a vertical divider between child components.
+The **\<RowSplit>** lays out child components horizontally and inserts a vertical divider between every two child components.
 
 >  **NOTE**
 >
@@ -19,15 +19,13 @@ RowSplit()
 
 | Name| Type| Description|
 | -------- | -------- | -------- |
-| resizeable | boolean | Whether the divider can be dragged.<br>Default value: **false** |
+| resizeable | boolean | Whether the divider can be dragged.<br/>Default value: **false** |
 
 >  **NOTE**
 >
-> Similar to **\<RowSplit>**, the divider of **\<RowSplit>** can be dragged to a position that just fully holds a component.
+> The divider of **\<RowSplit>** can change the width of the left and right child components, but only to the extent that the resultant width falls within the maximum and minimum widths of the child components.
 >
-> Dragging is not supported in the Previewer. Check the drag effect on a real device.
->
-> The universal attributes **clip** and **margin** are not supported.
+> Universal attributes such as **clip** and **margin** are supported. If **clip** is not set, the default value **true** is used.
 
 
 ## Example
@@ -54,4 +52,4 @@ struct RowSplitExample {
 }
 ```
 
-![en-us_image_0000001212058482](figures/en-us_image_0000001212058482.gif)
+![en-us_image_0000001219982729](figures/en-us_image_0000001219982729.gif)

en/application-dev/reference/errorcodes/errorcode-universal.md

@@ -44,7 +44,7 @@ BusinessError 401: Parameter error. The type of "${parameterName}" must be ${val
 
 **Description**
 
-This error code is reported when a parameter error occurs.
+This error code is reported when a parameter error occurs. Regardless of whether the API is synchronous or asynchronous, this type of error is generally thrown in synchronous mode.
 
 **Possible Causes**
 

en/application-dev/reference/syscap.md

@@ -110,11 +110,11 @@ You can use either the ArtTS or native API to determine whether an API is availa
   - Method 2: Import a module using the **import** API. If the current device does not support the module, the import result is **undefined**. Before using an API, you must make sure the API is available.
 
 	```ts
-	import geolocation from '@ohos.geolocation';
+	import geolocationManager from '@ohos.geoLocationManager';
 
-	if (geolocation) {
-	geolocation.getCurrentLocation((location) => {
-		console.log(location.latitude, location.longitude);
+	if (geolocationManager) {
+	geolocationManager.getCurrentLocation((location) => {
+		console.log('current location: ' + JSON.stringify(location));
 	});
 	} else {
 	console.log('This device does not support location information.');

en/release-notes/changelogs/v3.2-beta5/changelogs-arkui.md

@@ -39,7 +39,6 @@
     }
     ```
 
-    ![datePicker](../../../application-dev/reference/arkui-ts/figures/datePicker.gif)
 
 2. The data type declaration of the **@State**, **@Provide**, **@Link**, or **@Consume** decorated state variables can consist of only one of the primitive data types or reference data types.