!19866 翻译完成：根据捉虫意见刷新application-models文件夹

Merge pull request !19866 from wusongqing/E0619

en/application-dev/application-models/Readme-EN.md

@@ -8,14 +8,14 @@
   - Stage Model Application Components
     - [Application- or Component-Level Configuration](application-component-configuration-stage.md)
     - UIAbility Component
-      - [UIAbility Component Overview](uiability-overview.md)
-      - [UIAbility Component Lifecycle](uiability-lifecycle.md)
-      - [UIAbility Component Launch Type](uiability-launch-type.md)
-      - [UIAbility Component Usage](uiability-usage.md)
-      - [Data Synchronization Between UIAbility and UI](uiability-data-sync-with-ui.md)
+      - [UIAbility Overview](uiability-overview.md)
+      - [UIAbility Lifecycle](uiability-lifecycle.md)
+      - [UIAbility Launch Type](uiability-launch-type.md)
+      - [UIAbility Usage](uiability-usage.md)
+      - [Data Synchronization Between UIAbility and UI Page](uiability-data-sync-with-ui.md)
       - [Interaction Between Intra-Device UIAbility Components](uiability-intra-device-interaction.md)
     - ExtensionAbility Component
-      - [ExtensionAbility Component Overview](extensionability-overview.md)
+      - [ExtensionAbility Overview](extensionability-overview.md)
       - [ServiceExtensionAbility](serviceextensionability.md)
       - [AccessibilityExtensionAbility](accessibilityextensionability.md)
       - [EnterpriseAdminExtensionAbility](enterprise-extensionAbility.md)
@@ -90,8 +90,8 @@
   - FA Model Application Components
     - [Application- or Component-Level Configuration](application-component-configuration-fa.md)
     - PageAbility Component Development
-      - [PageAbility Component Overview](pageability-overview.md)
-      - [PageAbility Component Configuration](pageability-configuration.md)
+      - [PageAbility Overview](pageability-overview.md)
+      - [PageAbility Configuration](pageability-configuration.md)
       - [PageAbility Lifecycle](pageability-lifecycle.md)
       - [PageAbility Launch Type](pageability-launch-type.md)
       - [Creating a PageAbility](create-pageability.md)
@@ -103,15 +103,15 @@
       - [Requesting Permissions](request-permissions.md)
       - [Redirection Rules](redirection-rules.md)
     - ServiceAbility Component Development
-      - [ServiceAbility Component Overview](serviceability-overview.md)
-      - [ServiceAbility Component Configuration](serviceability-configuration.md)
+      - [ServiceAbility Overview](serviceability-overview.md)
+      - [ServiceAbility Configuration](serviceability-configuration.md)
       - [ServiceAbility Lifecycle](serviceability-lifecycle.md)
       - [Creating a ServiceAbility](create-serviceability.md)
       - [Starting a ServiceAbility](start-serviceability.md)
       - [Connecting to a ServiceAbility](connect-serviceability.md)
     - DataAbility Component Development
-      - [DataAbility Component Overview](dataability-overview.md)
-      - [DataAbility Component Configuration](dataability-configuration.md)
+      - [DataAbility Overview](dataability-overview.md)
+      - [DataAbility Configuration](dataability-configuration.md)
       - [DataAbility Lifecycle](dataability-lifecycle.md)
       - [Creating a DataAbility](create-dataability.md)
       - [Starting a DataAbility](start-dataability.md)

en/application-dev/application-models/access-datashareextensionability-from-fa.md

@@ -27,12 +27,14 @@ Instead of manual modification, OpenHarmony adopts the following processing:
 
 ## Constraints
 
-1. When you switch a DataAbility to a DataShareExtensionAbility, only the URI prefix can be modified.![FAvsStage-uri](figures/FAvsStage-uri.png)
+1. When you switch a DataAbility to a DataShareExtensionAbility, only the URI prefix can be modified.
 
-2. The **DataShareHelper** class implements only certain APIs of **DataAbilityHelper**. For details about the APIs, see the table below.
+   ![FAvsStage-uri](figures/FAvsStage-uri.png)
+
+3. The **DataShareHelper** class implements only certain APIs of **DataAbilityHelper**. For details about the APIs, see the table below.
+
+   **Table 1** API compatibility when the FA model accesses a DataShareExtensionAbility of the stage model
 
-     **Table 1** APIs invoked when the FA model accesses a DataShareExtensionAbility of the stage model
-   
    | API| Provided by DataAbilityHelper| Provided by DataShareHelper| Compatible|
    | -------- | -------- | -------- | -------- |
    | on | Yes| Yes| Yes|

en/application-dev/application-models/api-switch-overview.md

 # API Switching Overview
 
 
-Due to the differences in the thread model and process model, certain APIs (marked with **FAModelOnly** in the SDK) can be used only in the FA model. When switching an application from the FA model to the stage model, replace the APIs marked with **FAModelOnly** in the application with the APIs supported in the stage model. This topic uses the switching of **startAbility()** as an example.
+Due to the differences in the thread model and process model, certain APIs can be used only in the FA model. They are marked with **FAModelOnly** in the SDK. When switching an application from the FA model to the stage model, replace the APIs marked with **FAModelOnly** in the application with the APIs supported in the stage model. This topic uses the switching of **startAbility()** as an example.
 
 ![api-switch-overview](figures/api-switch-overview.png)
 
@@ -27,7 +27,7 @@ Due to the differences in the thread model and process model, certain APIs (mark
 - Sample code of **startAbility()** in the stage model:
 
   ```ts
-  // context is a member of the ability object and is required for invoking inside a non-ability object.
+  // Context is a member of the ability object and is required for invoking inside a non-ability object.
   // Pass in the Context object.
   let wantInfo = {
     bundleName: "com.example.myapplication",

en/application-dev/application-models/application-component-configuration-stage.md

@@ -13,7 +13,7 @@ The application icon and label are used in **Settings**. For example, they are d
 
 - **Configuring the bundle name**
   
-  The bundle name is specified by the **bundleName** field in the [app.json5 file](../quick-start/app-configuration-file.md) in the **AppScope** directory of the project. This field uniquely identifies an application. You are advised to use the reverse domain name notion, for example, *com.example.demo*, where the first part is the domain suffix **com**, the second part is the vendor/individual name, and the third part is the application name, which can be of multiple levels.
+  The bundle name is specified by the **bundleName** field in the [app.json5 file](../quick-start/app-configuration-file.md) in the **AppScope** directory of the project. This field uniquely identifies an application. You are advised to use the reverse domain name notation, for example, *com.example.demo*, where the first part is the domain suffix **com**, the second part is the vendor/individual name, and the third part is the application name, which can be of multiple levels.
   
 - **Configuring the application icon and label**
 
@@ -21,7 +21,7 @@ The application icon and label are used in **Settings**. For example, they are d
 
   The application icon is specified by the **icon** field in the [app.json5 file](../quick-start/app-configuration-file.md) in the **AppScope** directory of the project. The **icon** field must be set to the index of an image so that the image is displayed as the application icon.
 
-  The application label is specified by the **label** field in the [app.json5 file](../quick-start/app-configuration-file.md) in the **AppScope** module of the project. The **label** field specifies the application name displayed to users. It must be set to the index of a string resource.
+  The application label is specified by the **label** field in the [app.json5 file](../quick-start/app-configuration-file.md) in the **AppScope** directory of the project. The **label** field specifies the application name displayed to users. It must be set to the index of a string resource.
 
   ```json
   {
@@ -37,7 +37,7 @@ The application icon and label are used in **Settings**. For example, they are d
   
     On the stage model, you can configure an entry icon and label for each application component. The entry icon and label are displayed on the home screen.
 
-    The entry icon is configured by specifying **icon** under **abilities** in the [module.json5 file](../quick-start/module-configuration-file.md). For example, if you want to display the icon of the UIAbility component on the home screen, add **entity.system.home** to **entities** and **ohos.want.action.home** to **actions** under **skills**. If this field is configured for multiple UIAbility components of an application, multiple icons are displayed on the home screen, corresponding to their respective UIAbility component.
+    The entry icon is configured by specifying **icon** under **abilities** in the [module.json5 file](../quick-start/module-configuration-file.md). For example, if you want to display the icon of the UIAbility component on the home screen, add **entity.system.home** to **entities** and **ohos.want.action.home** to **actions** under **skills**. If this field is configured for multiple UIAbility components of an application, multiple icons are displayed on the home screen, corresponding to their respective UIAbility components.
   
   ```json
   {
@@ -65,33 +65,33 @@ The application icon and label are used in **Settings**. For example, they are d
   ```
   OpenHarmony strictly controls applications without icons to prevent malicious applications from deliberately configuring no icon to block uninstall attempts.
 
-  To hide an application icon from the home screen, you must configure the **AllowAppDesktopIconHide** privilege. For details, see [Application Privilege Configuration Guide](../../device-dev/subsystems/subsys-app-privilege-config-guide.md). The rules for displaying the entry icon and entry label are as follows:
+  To hide an application icon on the home screen, you must configure the **AllowAppDesktopIconHide** privilege. For details, see [Application Privilege Configuration Guide](../../device-dev/subsystems/subsys-app-privilege-config-guide.md). The rules for displaying the entry icon and entry label are as follows:
 
   1. The HAP file contains UIAbility configuration.
     * An entry icon is set in the **abilities** field of the **module.json5** file.
-      * The application does not have the privilege to hide its icon from the home screen.
+      * The application does not have the privilege to hide its icon on the home screen.
         * The system uses the icon configured for the UIAbility as the entry icon and displays it on the home screen. Touching this icon will direct the user to the home page of the UIAbility.
         * The system uses the label configured for the UIAbility as the entry label and displays it on the home screen. If no label is configured, the system uses the label specified in the **app.json5** file as the entry label and displays it on the home screen.
-      * The application has the privilege to hide its icon from the home screen.
+      * The application has the privilege to hide its icon on the home screen.
         * The application information is not returned when the home screen queries the information, and the entry icon and label of the application are not displayed on the home screen.
     * No entry icon is set in the **abilities** field of the **module.json5** file.
-      * The application does not have the privilege to hide its icon from the home screen.
+      * The application does not have the privilege to hide its icon on the home screen.
         * The system uses the icon specified in the **app.json5** file as the entry icon and displays it on the home screen. Touching this icon will direct the user to the application details page, as shown below.
         * The system uses the label specified in the **app.json5** file as the entry label and displays it on the home screen.
-      * The application has the privilege to hide its icon from the home screen.
+      * The application has the privilege to hide its icon on the home screen.
         * The application information is not returned when the home screen queries the information, and the entry icon and label of the application are not displayed on the home screen.
 
   2. The HAP file does not contain UIAbility configuration.
-    * The application does not have the privilege to hide its icon from the home screen.
+    * The application does not have the privilege to hide its icon on the home screen.
       * The system uses the icon specified in the **app.json5** file as the entry icon and displays it on the home screen. Touching this icon will direct the user to the application details page, as shown below.
       * The system uses the label specified in the **app.json5** file as the entry label and displays it on the home screen.
-    * The application has the privilege to hide its icon from the home screen.
+    * The application has the privilege to hide its icon on the home screen.
       * The application information is not returned when the home screen queries the information, and the entry icon and label of the application are not displayed on the home screen.
 
   **Figure 2** Application details page
-
-  ![Application details page](figures/application_details.jpg)
-
+  
+![Application details page](figures/application_details.jpg)
+  
 - **Configuring application version declaration**
   
   To declare the application version, configure the **versionCode** and **versionName** fields in the [app.json5 file](../quick-start/app-configuration-file.md) in the **AppScope** directory of the project. **versionCode** specifies the version number of the application. The value is a 32-bit non-negative integer. It is used only to determine whether a version is later than another version. A larger value indicates a later version. **versionName** provides the text description of the version number.

en/application-dev/application-models/application-context-fa.md

@@ -44,7 +44,7 @@ For details about the APIs, see [API Reference](../reference/apis/js-apis-inner-
    }
    ```
 
-2. Set the display orientation of the host featureAbility.
+2. Set the display orientation of the **featureAbility**.
    
    ```ts
    import featureAbility from '@ohos.ability.featureAbility'

en/application-dev/application-models/component-startup-rules-fa.md

@@ -12,7 +12,7 @@ Component startup refers to the behavior of starting or connecting to an applica
 To deliver a better user experience, OpenHarmony restricts the following behavior:
 
 
-- A background application randomly displays a dialog box, such as an ads pop-up.
+- A background application randomly displays a dialog box, such as an ad pop-up.
 
 - Background applications wake up each other. This type of behavior occupies system resources and increases power consumption, or even causes system frozen.
 
@@ -34,14 +34,14 @@ In view of this, OpenHarmony formulates a set of component startup rules, as fol
 - **Before starting the ServiceAbility or DataAbility component of an application, verify the AssociateWakeUp field of the target application.**
   - This rule applies only to cross-application scenarios.
   - This rule is valid only when the target component is ServiceAbility or DataAbility.
-  - The ServiceAbility and DataAbility of an application can be accessed by others only when **AssociateWakeUp** of the target application is set to **true**.
+  - The ServiceAbility and DataAbility of an application can be accessed by other applications only when **AssociateWakeUp** of the target application is set to **true**.
   - The **AssociateWakeUp** field can be configured only for preset applications. For other applications, this field is set to **false** by default.
 
 
 > **NOTE**
 > 1. Component startup control has been implemented since OpenHarmony v3.2 Release.
 > 
-> 2. The new component startup rules are more strict than the original ones. You must be familiar with the new startup rules to prevent service exceptions.
+> 2. The new component startup rules are more strict than the original ones. Get familiar with the new startup rules to prevent service exceptions.
 
  
 

en/application-dev/application-models/configuration-file-diff.md

@@ -4,8 +4,8 @@
 The FA model uses the [config.json file](../quick-start/application-configuration-file-overview-fa.md) to describe the basic information about an application. An application can have multiple modules, and each module has a **config.json** file. The **config.json** file consists of three parts: **app**, **deviceConfig**, and **module**. The **app** tag is used to configure application-level attributes. If an application has multiple modules, the **app** configuration in each **config.json** file must be consistent.
 
 
-The stage model uses the [app.json5](../quick-start/app-configuration-file.md) and [module.json](../quick-start/module-configuration-file.md) files to describe the basic information about an application. An application can have multiple modules but only one **app.json5** file. This file is used to configure application-level attributes and takes effect for all the modules. Each module has a **module.json5** file, which is used to configure module-level attributes and takes effect only for the current module.
+The stage model uses the [app.json5](../quick-start/app-configuration-file.md) and [module.json](../quick-start/module-configuration-file.md) files to describe the basic information about an application. An application can have multiple modules but only one **app.json5** file. This file is used to configure application-level attributes and the configuration applies to all the modules. Each module has a **module.json5** file, which is used to configure module-level attributes and the configuration applies only for the current module.
 
-**Figure 1** Configuration file differences 
-![comparison-of-configuration-file](figures/comparison-of-configuration-file.png)
+**Figure 1** Configuration file differences
 
+![comparison-of-configuration-file](figures/comparison-of-configuration-file.png)
\ No newline at end of file

en/application-dev/application-models/context-switch.md

 # Context Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API or Field in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API or Field in the Stage Model| 
 | -------- | -------- | -------- |
 | [getOrCreateLocalDir(callback:AsyncCallback&lt;string&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextgetorcreatelocaldir7)<br>[getOrCreateLocalDir():Promise&lt;string&gt;;](../reference/apis/js-apis-inner-app-context.md#contextgetorcreatelocaldir7-1) | There is no corresponding API in the stage model.| Applications developed on the stage model do not have the operation permission in the application root directory. Therefore, no corresponding API is provided.|
 | [verifyPermission(permission:string,options:PermissionOptions,callback:AsyncCallback&lt;number&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextverifypermission7)<br>[verifyPermission(permission:string,callback:AsyncCallback&lt;number&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextverifypermission7-1)<br>[verifyPermission(permission:string,options?:PermissionOptions):Promise&lt;number&gt;;](../reference/apis/js-apis-inner-app-context.md#contextverifypermission7-2) | \@ohos.abilityAccessCtrl.d.ts | [verifyAccessTokenSync(tokenID: number, permissionName: Permissions): GrantStatus;](../reference/apis/js-apis-abilityAccessCtrl.md#verifyaccesstokensync9)<br>[verifyAccessToken(tokenID: number, permissionName: Permissions): Promise&lt;GrantStatus&gt;;](../reference/apis/js-apis-abilityAccessCtrl.md#verifyaccesstoken9) |
-| [requestPermissionsFromUser(permissions:Array&lt;string&gt;,requestCode:number,resultCallback:AsyncCallback&lt;PermissionRequestResult&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextrequestpermissionsfromuser7)<br/>[requestPermissionsFromUser(permissions:Array&lt;string&gt;,requestCode:number):Promise&lt;PermissionRequestResult&gt;;](../reference/apis/js-apis-inner-app-context.md#contextrequestpermissionsfromuser7-1) | \@ohos.abilityAccessCtrl.d.ts | [requestPermissionsFromUser(context: Context, permissionList: Array&lt;Permissions&gt;, requestCallback: AsyncCallback&lt;PermissionRequestResult&gt;) : void;](../reference/apis/js-apis-abilityAccessCtrl.md#requestpermissionsfromuser9)<br/>[requestPermissionsFromUser(context: Context, permissionList: Array&lt;Permissions&gt;) : Promise&lt;PermissionRequestResult&gt;;](../reference/apis/js-apis-abilityAccessCtrl.md#requestpermissionsfromuser9-1) |
+| [requestPermissionsFromUser(permissions:Array&lt;string&gt;,requestCode:number,resultCallback:AsyncCallback&lt;PermissionRequestResult&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextrequestpermissionsfromuser7)<br>[requestPermissionsFromUser(permissions:Array&lt;string&gt;,requestCode:number):Promise&lt;PermissionRequestResult&gt;;](../reference/apis/js-apis-inner-app-context.md#contextrequestpermissionsfromuser7-1) | \@ohos.abilityAccessCtrl.d.ts | [requestPermissionsFromUser(context: Context, permissionList: Array&lt;Permissions&gt;, requestCallback: AsyncCallback&lt;PermissionRequestResult&gt;) : void;](../reference/apis/js-apis-abilityAccessCtrl.md#requestpermissionsfromuser9)<br>[requestPermissionsFromUser(context: Context, permissionList: Array&lt;Permissions&gt;) : Promise&lt;PermissionRequestResult&gt;;](../reference/apis/js-apis-abilityAccessCtrl.md#requestpermissionsfromuser9-1) |
 | [getApplicationInfo(callback:AsyncCallback&lt;ApplicationInfo&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextgetapplicationinfo7)<br>[getApplicationInfo():Promise&lt;ApplicationInfo&gt;;](../reference/apis/js-apis-inner-app-context.md#contextgetapplicationinfo7-1) | application\Context.d.ts | [applicationInfo: ApplicationInfo;](../reference/apis/js-apis-inner-application-context.md#attributes)|
 | [getBundleName(callback : AsyncCallback&lt;string&gt;): void;](../reference/apis/js-apis-inner-app-context.md#contextgetbundlename7)<br>[getBundleName(): Promise&lt;string&gt;;](../reference/apis/js-apis-inner-app-context.md#contextgetbundlename7-1) | application\UIAbilityContext.d.ts | [abilityInfo.bundleName: string;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#attributes)|
 | [getDisplayOrientation(callback : AsyncCallback&lt;bundle.DisplayOrientation&gt;): void;](../reference/apis/js-apis-inner-app-context.md#contextgetdisplayorientation7)<br>[getDisplayOrientation(): Promise&lt;bundle.DisplayOrientation&gt;;](../reference/apis/js-apis-inner-app-context.md#contextgetdisplayorientation7-1) | \@ohos.screen.d.ts | [readonly orientation: Orientation;](../reference/apis/js-apis-screen.md#orientation) |
@@ -26,3 +26,5 @@
 | [getAbilityInfo(callback:AsyncCallback&lt;AbilityInfo&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextgetabilityinfo7)<br>[getAbilityInfo():Promise&lt;AbilityInfo&gt;;](../reference/apis/js-apis-inner-app-context.md#contextgetabilityinfo7-1) | application\UIAbilityContext.d.ts | [abilityInfo: AbilityInfo;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#attributes)|
 | [isUpdatingConfigurations(callback:AsyncCallback&lt;boolean&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextisupdatingconfigurations7)<br>[isUpdatingConfigurations():Promise&lt;boolean&gt;;](../reference/apis/js-apis-inner-app-context.md#contextisupdatingconfigurations7-1) | There is no corresponding API in the stage model.| OpenHarmony applications do not restart when the system environment changes. The **onConfigurationUpdated** callback is invoked to notify the applications of the changes. This API provides an empty implementation in the FA model, and the stage model does not provide a corresponding API.|
 | [printDrawnCompleted(callback:AsyncCallback&lt;void&gt;):void;](../reference/apis/js-apis-inner-app-context.md#contextprintdrawncompleted7)<br>[printDrawnCompleted():Promise&lt;void&gt;;](../reference/apis/js-apis-inner-app-context.md#contextprintdrawncompleted7-1) | There is no corresponding API in the stage model.| This API provides an empty implementation in the FA model. The stage model does not provide a corresponding API.|
+
+ <!--no_check--> 
\ No newline at end of file

en/application-dev/application-models/dataability-switch.md

@@ -7,9 +7,9 @@ The DataAbility component in the FA model corresponds to the DataShareExtensionA
 The DataShareExtensionAbility class provides system APIs. Only system applications can create DataShareExtensionAbility instances. Therefore, DataAbility switching adopts different policies for system applications and third-party applications.  
 
 
-## Switching a DataAbility of a System Application
+## Switching a DataAbility for a System Application
 
-The procedure for switching a DataAbility of a system application is similar to the procedure of PageAbility switching.
+The procedure for switching a DataAbility for a system application is similar to the procedure of PageAbility switching.
 
 1. Create a DataShareExtensionAbility in the stage model.
 
@@ -34,7 +34,7 @@ The procedure for switching a DataAbility of a system application is similar to
    | call?(method: string, arg: string, extras: PacMap, callback: AsyncCallback<PacMap>): void | NA | This method is not provided in the stage model. You need to implement the functionality based on service functions.|
 
 
-## Switching a DataAbility of a Third-Party Application
+## Switching a DataAbility for a Third-Party Application
 
 In the stage model, third-party applications cannot provide data services for other third-party applications. You can select a switching solution based on your service requirements.
 

en/application-dev/application-models/dataabilityhelper-switch.md

 # DataAbilityHelper Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | [openFile(uri: string, mode: string, callback: AsyncCallback&lt;number&gt;): void;](../reference/apis/js-apis-inner-ability-dataAbilityHelper.md#dataabilityhelperopenfile)<br>[openFile(uri: string, mode: string): Promise&lt;number&gt;;](../reference/apis/js-apis-inner-ability-dataAbilityHelper.md#dataabilityhelperopenfile-1) | \@ohos.data.fileAccess.d.ts | [openFile(uri: string, flags: OPENFLAGS) : Promise&lt;number&gt;;](../reference/apis/js-apis-fileAccess.md#fileaccesshelperopenfile)<br>[openFile(uri: string, flags: OPENFLAGS, callback: AsyncCallback&lt;number&gt;) : void;](../reference/apis/js-apis-fileAccess.md#fileaccesshelperopenfile) |
 | [on(type: 'dataChange', uri: string, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-ability-dataAbilityHelper.md#dataabilityhelperon) | \@ohos.data.dataShare.d.ts | [on(type: 'dataChange', uri: string, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-data-dataShare.md#ondatachange) |

en/application-dev/application-models/extensionability-overview.md

-# ExtensionAbility Component Overview
+# ExtensionAbility Overview
 
 
-The ExtensionAbility component is used for specific scenarios such as widgets and input methods.
+The ExtensionAbility component is used for specific scenarios such as widget development and input method development.
 
 
-An [ExtensionAbilityType](../reference/apis/js-apis-bundleManager.md#extensionabilitytype) is provided for every specific scenario. All types of ExtensionAbility components are managed by the corresponding system services in a unified manner. For example, the InputMethodExtensionAbility component is managed by the input method management service. The following ExtensionAbility types are supported:
+An [ExtensionAbility type](../reference/apis/js-apis-bundleManager.md#extensionabilitytype) is provided for every specific scenario. All types of ExtensionAbility components are managed by the corresponding system services in a unified manner. For example, the InputMethodExtensionAbility component is managed by the input method management service. The following ExtensionAbility types are supported:
 
 
 - [FormExtensionAbility](../reference/apis/js-apis-app-form-formExtensionAbility.md): ExtensionAbility component of the form type, which provides APIs related to widgets.
@@ -13,7 +13,7 @@ An [ExtensionAbilityType](../reference/apis/js-apis-bundleManager.md#extensionab
 
 - [InputMethodExtensionAbility](../reference/apis/js-apis-inputmethod.md): ExtensionAbility component of the input_method type, which is used to develop input method applications.
 
-- [ServiceExtensionAbility](../reference/apis/js-apis-app-ability-serviceExtensionAbility.md): ExtensionAbility component of the service type, which provides APIs related to background service scenarios.
+- [ServiceExtensionAbility](../reference/apis/js-apis-app-ability-serviceExtensionAbility.md): ExtensionAbility component of the service type, which provides APIs related to background services.
 
 - [AccessibilityExtensionAbility](../reference/apis/js-apis-application-accessibilityExtensionAbility.md): ExtensionAbility component of the accessibility type, which provides APIs related to the accessibility feature.
 
@@ -26,16 +26,15 @@ An [ExtensionAbilityType](../reference/apis/js-apis-bundleManager.md#extensionab
 - [EnterpriseAdminExtensionAbility](../reference/apis/js-apis-EnterpriseAdminExtensionAbility.md): ExtensionAbility component of the enterprise_admin type, which provides APIs for processing enterprise management events, such as application installation events on devices and events indicating too many incorrect screen-lock password attempts.
 
 > **NOTE**
->
-> 1. Third-party applications cannot implement ServiceExtensionAbility, DataShareExtensionAbility, StaticSubscriberExtensionAbility, or WindowExtensionAbility.
->
-> 2. To implement transaction processing in the background for a third-party application, use background tasks rather than ServiceExtensionAbility. For details, see [Background Task](../task-management/background-task-overview.md).
->
-> 3. Third-party applications can use other types of ExtensionAbility components that have been defined.
+> 
+>- Third-party applications cannot implement ServiceExtensionAbility, DataShareExtensionAbility, StaticSubscriberExtensionAbility, or WindowExtensionAbility. They can use other types of ExtensionAbility components that have been defined.
+> 
+>- To implement transaction processing in the background for a third-party application, use background tasks rather than ServiceExtensionAbility. For details, see [Background Task](../task-management/background-task-overview.md).
+
 
 ## Using ExtensionAbility of the Specified Type
 
-All types of ExtensionAbility components are started by the corresponding system management service, rather than applications, so that their lifecycles are under control by the system. The caller of the ExtensionAbility component does not need to care about its lifecycle.
+Each type of ExtensionAbility component is started by the corresponding system management service, rather than applications, so that its lifecycle is under system control. The caller of the ExtensionAbility component does not need to care about its lifecycle.
 
 The following uses [InputMethodExtensionAbility](../reference/apis/js-apis-inputmethod.md) as an example. As shown in the figure below, when an application calls the InputMethodExtensionAbility component, the input method management service is called first. The input method management service starts the InputMethodExtensionAbility component, returns the component to the application, and starts to manage its lifecycle.
 
@@ -46,18 +45,18 @@ The following uses [InputMethodExtensionAbility](../reference/apis/js-apis-input
 
 ## Implementing ExtensionAbility of the Specified Type
 
-The following uses [FormExtensionAbility](../reference/apis/js-apis-app-form-formExtensionAbility.md) as an example. The widget framework provides the base class [FormExtensionAbility](../reference/apis/js-apis-app-form-formExtensionAbility.md). You derive this base class to create your own class (such as **MyFormExtensionAbility**), implement the callbacks, such as **onCreate()** and **onUpdateForm()**, to provide specific widget functionalities. For details, see [FormExtensionAbility](service-widget-overview.md).
+The following uses [FormExtensionAbility](../reference/apis/js-apis-app-form-formExtensionAbility.md) as an example. The widget framework provides the base class [FormExtensionAbility](../reference/apis/js-apis-app-form-formExtensionAbility.md). You can derive this base class to create your own class (for example, **MyFormExtensionAbility**) and implement the callbacks, such as **onCreate()** and **onUpdateForm()**, to provide specific widget features. For details, see [FormExtensionAbility](service-widget-overview.md).
 
-You do not need to care when to add or delete a widget. The lifecycle of the FormExtensionAbility instance and the lifecycle of the ExtensionAbility process where the FormExtensionAbility instance is located are scheduled and managed by FormManagerService.
+You do not need to care when to add or delete a widget. The lifecycle of the FormExtensionAbility instance and the lifecycle of the ExtensionAbility process where the FormExtensionAbility instance is located are managed by FormManagerService.
 
 ![form_extension](figures/form_extension.png)
 
 
 > **NOTE**
 >
-> For an application, all ExtensionAbility components of the same type run in an independent process, whereas UIAbility, ServiceExtensionAbility, and DataShareExtensionAbility run in another independent process. For details, see [Process Model (Stage Model)](process-model-stage.md).
+> For an application, all ExtensionAbility components of the same type run in an independent process, whereas the UIAbility, ServiceExtensionAbility, and DataShareExtensionAbility components run in another independent process. For details, see [Process Model (Stage Model)](process-model-stage.md).
 >
-> For example, an application has one UIAbility component, one ServiceExtensionAbility, one DataShareExtensionAbility, two FormExtensionAbility, and one ImeExtensionAbility. When the application is running, there are three processes:
+> For example, if an application has one UIAbility component, one ServiceExtensionAbility component, one DataShareExtensionAbility component, two FormExtensionAbility components, and one ImeExtensionAbility component, there will be three processes when the application is running.
 >
 > - UIAbility, ServiceExtensionAbility, and DataShareExtensionAbility run in an independent process.
 >

en/application-dev/application-models/fa-stage-interaction-overview.md

@@ -4,22 +4,23 @@
 The FA model is supported by API version 8 and earlier versions, and the stage model is recommended since API version 9. The FA model and stage model have their respective components. The FA model provides three types of application components: PageAbility, ServiceAbility, and DataAbility. The stage model provides two types of application components: UIAbility and ExtensionAbility.
 
 
-You cannot use both models for the development of an application (see the figure below). However, a device (system) can contain applications developed on both models (scenario 3 in the figure below). In this case, their components may interact with each other.
+You cannot use both models for the development of an application (see the figure below). However, a device (system) can contain applications developed on different models (scenario 3 in the figure below). In this case, their components may interact with each other.
+
+**Figure 1** Coexistent application components of the FA model and stage model
 
-Figure 1 Coexistent application components of the FA model and stage model 
 ![coexistence-of-FAandStage](figures/coexistence-of-FAandStage.png)
 
 
-The following table lists the possible interaction scenarios. You must pay attention to the concerns listed below during your application development.
+The following table lists the possible interaction scenarios and the concerns of each scenario.
 
 
-Table 1 Application component interaction scenarios
+**Table 1** Application component interaction scenarios
 
 | Interaction Scenario| Concerns|
 | -------- | -------- |
-| [Starting a UIAbility from the FA Model](start-uiability-from-fa.md) | Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the UIAbility in the stage model.|
-| [Connecting to a ServiceExtensionAbility from the FA Model](bind-serviceextensionability-from-fa.md) | Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the ServiceExtensionAbility in the stage model.|
-| [Accessing a DataShareExtensionAbility from the FA Model](access-datashareextensionability-from-fa.md) | No code modification is required. However, you need to understand the API compatibility of **DataShareHelper** and **DataAbilityHelper**.|
-| [Starting a PageAbility from the Stage Model](start-pageability-from-stage.md) | Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the PageAbility in the FA model.|
-| [Connecting to a ServiceAbility from the Stage Model](bind-serviceability-from-stage.md) | Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the ServiceAbility in the FA model.|
-| Accessing a DataAbility from the Stage Model | This type of access is not supported.|
+| [Starting a UIAbility from the FA Model](start-uiability-from-fa.md)| Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the UIAbility in the stage model.|
+| [Connecting to a ServiceExtensionAbility from the FA Model](bind-serviceextensionability-from-fa.md)| Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the ServiceExtensionAbility in the stage model.|
+| [Accessing a DataShareExtensionAbility from the FA Model](access-datashareextensionability-from-fa.md)| No code modification is required. However, you need to understand the API compatibility of **DataShareHelper** and **DataAbilityHelper**.|
+| [Starting a PageAbility from the Stage Model](start-pageability-from-stage.md)| Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the PageAbility in the FA model.|
+| [Connecting to a ServiceAbility from the Stage Model](bind-serviceability-from-stage.md)| Set **bundleName** and **abilityName** in the **want** parameter to the bundle name and ability name of the ServiceAbility in the FA model.|
+| Accessing a DataAbility from the Stage Model| This type of access is not supported.|

en/application-dev/application-models/featureability-switch.md

 # featureAbility Switching
 
 
-| API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model|
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
-| [getWant(callback: AsyncCallback&lt;Want&gt;): void;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitygetwant)<br>[getWant(): Promise&lt;Want&gt;;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitygetwant-1) | \@ohos.app.ability.UIAbility.d.ts | [launchWant: Want;](../reference/apis/js-apis-app-ability-uiAbility.md#attributes)|
+| [getWant(callback: AsyncCallback&lt;Want&gt;): void;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitygetwant)<br>[getWant(): Promise&lt;Want&gt;;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitygetwant-1) | \@ohos.app.ability.UIAbility.d.ts | [launchWant: Want;](../reference/apis/js-apis-app-ability-uiAbility.md#attributes)| 
 | [startAbility(parameter: StartAbilityParameter, callback: AsyncCallback&lt;number&gt;): void;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitystartability)<br>[startAbility(parameter: StartAbilityParameter): Promise&lt;number&gt;;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitystartability-1) | application\UIAbilityContext.d.ts | [startAbility(want: Want, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#abilitycontextstartability)<br>[startAbility(want: Want, options: StartOptions, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#abilitycontextstartability-1)<br>[startAbility(want: Want, options?: StartOptions): Promise&lt;void&gt;;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#abilitycontextstartability-2) |
 | [getContext(): Context;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitygetcontext) | \@ohos.app.ability.UIAbility.d.ts | [context: UIAbilityContext;](../reference/apis/js-apis-app-ability-uiAbility.md#attributes)|
 | [startAbilityForResult(parameter: StartAbilityParameter, callback: AsyncCallback&lt;AbilityResult&gt;): void;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitystartabilityforresult7)<br>[startAbilityForResult(parameter: StartAbilityParameter): Promise&lt;AbilityResult&gt;;](../reference/apis/js-apis-ability-featureAbility.md#featureabilitystartabilityforresult7-1) | application\UIAbilityContext.d.ts | [startAbilityForResult(want: Want, callback: AsyncCallback&lt;AbilityResult&gt;): void;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#abilitycontextstartabilityforresult)<br>[startAbilityForResult(want: Want, options: StartOptions, callback: AsyncCallback&lt;AbilityResult&gt;): void;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#abilitycontextstartabilityforresult-1)<br>[startAbilityForResult(want: Want, options?: StartOptions): Promise&lt;AbilityResult&gt;;](../reference/apis/js-apis-inner-application-uiAbilityContext.md#abilitycontextstartabilityforresult-2) |

en/application-dev/application-models/hop-cross-device-migration.md

@@ -3,7 +3,7 @@
 
 ## When to Use
 
-The main task of cross-device migration is to migrate the current task (including the page control status) of an application to the target device so that the task can continue on it. Cross-device migration supports the following functionalities:
+The main task of cross-device migration is to migrate the current task (including the page control status) of an application to the target device so that the task can continue on it. Cross-device migration supports the following features:
 
 - Storage and restoration of custom data
 
@@ -16,7 +16,8 @@ The main task of cross-device migration is to migrate the current task (includin
 
 The following figure shows the cross-device migration process.
 
-**Figure 1** Cross-device migration process 
+**Figure 1** Cross-device migration process
+
 ![hop-cross-device-migration](figures/hop-cross-device-migration.png)
 
 
@@ -49,7 +50,7 @@ The table below describes the main APIs used for cross-device migration. For det
 
 1. Request the **ohos.permission.DISTRIBUTED_DATASYNC** permission. For details, see [Declaring Permissions in the Configuration File](../security/accesstoken-guidelines.md#declaring-permissions-in-the-configuration-file).
 
-2. Display a dialog box to ask authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
+2. Display a dialog box to ask for authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
 
 3. Configure the fields related to cross-device migration in the configuration file.
 
@@ -79,7 +80,7 @@ The table below describes the main APIs used for cross-device migration. For det
 
    - Checking application compatibility: You can obtain the version number of the target application from **wantParam** and check the compatibility between the target application and the current application.
 
-   - Making a migration decision: You can determine whether to support the migration based on the return value of **onContinue()**. For details about the return value, see [Available APIs](#available-apis).
+   - Making a migration decision: You can determine whether to support the migration based on the return value of **onContinue()**. For details about the return values, see [Available APIs](#available-apis).
 
      The sample code is as follows:
      

en/application-dev/application-models/hop-multi-device-collaboration.md

@@ -3,7 +3,7 @@
 
 ## When to Use
 
-Multi-device coordination involves the following scenarios:
+Multi-device collaboration involves the following scenarios:
 
 - [Starting UIAbility or ServiceExtensionAbility Across Devices (No Data Returned)](#starting-uiability-or-serviceextensionability-across-devices-no-data-returned)
 
@@ -18,13 +18,14 @@ Multi-device coordination involves the following scenarios:
 
 The figure below shows the multi-device collaboration process.
 
-**Figure 1** Multi-device collaboration process 
+**Figure 1** Multi-device collaboration process
+
 ![hop-multi-device-collaboration](figures/hop-multi-device-collaboration.png)
 
 
 ## Constraints
 
-- Since multi-device collaboration task management is not available, you can obtain the device list by developing system applications. Access to third-party applications is not supported.
+- Since multi-device collaboration task management is not available, you can obtain the device list by developing system applications. Third-party applications cannot access the device list.
 
 - Multi-device collaboration must comply with [Inter-Device Component Startup Rules](component-startup-rules.md#inter-device-component-startup-rules).
 
@@ -51,7 +52,7 @@ On device A, touch the **Start** button provided by the initiator application to
 
 1. Request the **ohos.permission.DISTRIBUTED_DATASYNC** permission. For details, see [Declaring Permissions in the Configuration File](../security/accesstoken-guidelines.md#declaring-permissions-in-the-configuration-file).
 
-2. Display a dialog box to ask authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
+2. Display a dialog box to ask for authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
 
 3. Obtain the device ID of the target device.
 
@@ -119,7 +120,7 @@ On device A, touch the **Start** button provided by the initiator application to
 
 ## Starting UIAbility Across Devices (Data Returned)
 
-On device A, touch the **Start** button provided by the initiator application to start a specified UIAbility on device B. When the UIAbility on device B exits, a value is sent back to the initiator application.
+On device A, touch the **Start** button provided by the initiator application to start a specified UIAbility on device B. When the UIAbility on device B exits, a value is returned to the initiator application.
 
 
 ### Available APIs
@@ -137,7 +138,7 @@ On device A, touch the **Start** button provided by the initiator application to
 
 1. Request the **ohos.permission.DISTRIBUTED_DATASYNC** permission. For details, see [Declaring Permissions in the Configuration File](../security/accesstoken-guidelines.md#declaring-permissions-in-the-configuration-file).
 
-2. Display a dialog box to ask authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
+2. Display a dialog box to ask for authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
 
 3. Set the target component parameters on the initiator, and call **startAbilityForResult()** to start the target UIAbility. **data** in the asynchronous callback is used to receive the information returned by the target UIAbility to the initiator UIAbility after the target UIAbility terminates itself. For details about how to implement **getRemoteDeviceId()**, see [Starting UIAbility or ServiceExtensionAbility Across Devices (No Data Returned)](#starting-uiability-or-serviceextensionability-across-devices-no-data-returned).
 
@@ -156,7 +157,7 @@ On device A, touch the **Start** button provided by the initiator application to
    })
    ```
 
-4. After the UIAbility task at the target device is complete, call **terminateSelfWithResult()** to return the data to the initiator UIAbility.
+4. After the UIAbility task on the target device is complete, call **terminateSelfWithResult()** to return the data to the initiator UIAbility.
 
    ```ts
    const RESULT_CODE: number = 1001;
@@ -214,7 +215,7 @@ A system application can connect to a service on another device by calling [conn
 
 1. Request the **ohos.permission.DISTRIBUTED_DATASYNC** permission. For details, see [Declaring Permissions in the Configuration File](../security/accesstoken-guidelines.md#declaring-permissions-in-the-configuration-file).
 
-2. Display a dialog box to ask authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
+2. Display a dialog box to ask for authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
 
 3. (Optional) [Implement a background service](serviceextensionability.md#implementing-a-background-service). Perform this operation only if no background service is available.
 
@@ -223,7 +224,7 @@ A system application can connect to a service on another device by calling [conn
    - Set the target component parameters, including the target device ID, bundle name, and ability name.
    - Call **connectServiceExtensionAbility** to initiate a connection.
    - Receive the service handle returned by the target device when the connection is successful.
-   - Perform cross-device invoking and obtain the result returned by the target service.
+   - Perform cross-device call and obtain the result returned by the target service.
      
       ```ts
       import rpc from '@ohos.rpc';
@@ -311,7 +312,7 @@ The following describes how to implement multi-device collaboration through cros
 
 1. Request the **ohos.permission.DISTRIBUTED_DATASYNC** permission. For details, see [Declaring Permissions in the Configuration File](../security/accesstoken-guidelines.md#declaring-permissions-in-the-configuration-file).
 
-2. Display a dialog box to ask authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
+2. Display a dialog box to ask for authorization from the user when the application is started for the first time. For details, see [Requesting User Authorization](../security/accesstoken-guidelines.md#requesting-user-authorization).
 
 3. Create the CalleeAbility.
    

en/application-dev/application-models/inter-device-interaction-hop-overview.md

@@ -3,7 +3,7 @@
 
 ## When to Use
 
-As the all-scenario, multi-device lifestyle becomes popular, users have an increasing number of devices. Each device provides users with what they need in a certain scenario. For example, watches allow users to view information in a timely manner, and smart TVs bring them an immersive watching experience. However, each device has its limitation, for example, typing text on a smart TV is frustrating as it is much more difficult than on a mobile device. If multiple devices can sense each other through a distributed OS and together form a super device, the strengths of each device can be fully exerted to provide a more natural and smoother distributed experience for users.
+As the all-scenario, multi-device lifestyle becomes popular, users have an increasing number of devices. Each device provides users with what they need in a certain scenario. For example, watches allow users to view information in a timely manner, and smart TVs bring them an immersive watching experience. However, each device has its limitations, for example, typing text on a smart TV is frustrating as it is much more difficult than on a mobile device. If multiple devices can sense each other through a distributed OS and together form a super device, the strengths of each device can be fully exerted to provide a more natural and smoother distributed experience for users.
 
 In OpenHarmony, distributed operations across devices are called continuation (previously named hopping), which is further classified into [cross-device migration](hop-cross-device-migration.md) and [multi-device collaboration](hop-multi-device-collaboration.md). To implement continuation, cross-device interaction capabilities of application components are required. Currently, these capabilities are open only to system applications.
 
@@ -20,7 +20,7 @@ In OpenHarmony, distributed operations across devices are called continuation (p
 
 - **Multi-device collaboration**
 
-  Multi-device collaboration enables collaboration between multiple devices, providing users with more efficient and immersive experience than with a single device. A typical multi-device collaboration scenario is as follows: Application A on the tablet is used as the answer board, and application B on the smart TV is used for live broadcast, delivering a better online class experience. From the perspective of application development, multi-device collaboration enables different UIAbility or ServiceExtensionAbility components to run simultaneously or alternately on multiple devices to provide a complete service, or enables the same UIAbility and ServiceExtensionAbility component to run simultaneously on multiple devices to provide a complete service.
+  Multi-device collaboration provides users with more efficient and immersive experience than with a single device. A typical multi-device collaboration scenario is as follows: Application A on the tablet is used as the answer board, and application B on the smart TV is used for live broadcast, delivering a better online class experience. From the perspective of application development, multi-device collaboration enables different UIAbility or ServiceExtensionAbility components to run simultaneously or alternately on multiple devices to provide a complete service, or enables the same UIAbility and ServiceExtensionAbility component to run simultaneously on multiple devices to provide a complete service.
 
 
 ## Continuation Architecture
@@ -35,9 +35,9 @@ OpenHarmony provides a set of APIs for you to implement continuation in your app
 
 The following figure shows the continuation architecture.
 
-  **Figure 1** Continuation architecture
+**Figure 1** Continuation architecture
 
-  ![hop-structure](figures/hop-structure.png) 
+ ![hop-structure](figures/hop-structure.png)  
 
 - Cross-device migration task management: The initiator accepts a migration request from the user, provides a migration entry, and displays the migration result. (This capability is unavailable yet.)
 
@@ -47,4 +47,4 @@ The following figure shows the continuation architecture.
 
 - Distributed security authentication: provides an E2E encrypted channel for cross-device transmission between applications to ensure that the right person uses the right data through the right device.
 
-- DSoftBus: functions as a unified communication base for a wide range of devices such as tablets, wearables, and smart TVs, and enables unified distributed communication between these devices.
+- DSoftBus: functions as a unified communication base for a wide range of devices, such as tablets, wearables, and smart TVs, and enables unified distributed communication between these devices.

en/application-dev/application-models/lifecycleapp-switch.md

 # LifecycleApp Switching
 
 
-| API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model|
+| API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model|
 | -------- | -------- | -------- |
 | onShow?(): void; | \@ohos.window.d.ts | [on(eventType: 'windowStageEvent', callback: Callback&lt;WindowStageEventType&gt;): void;](../reference/apis/js-apis-window.md#onwindowstageevent9)<br>Listens for the switching to the [foreground](../reference/apis/js-apis-window.md#windowstageeventtype9).|
 | onHide?(): void; | \@ohos.window.d.ts | [on(eventType: 'windowStageEvent', callback: Callback&lt;WindowStageEventType&gt;): void;](../reference/apis/js-apis-window.md#onwindowstageevent9)<br>Listens for the switching to the [background](../reference/apis/js-apis-window.md#windowstageeventtype9).|
@@ -14,7 +14,7 @@
 | onRestoreData?(data: Object): void; | \@ohos.app.ability.UIAbility.d.ts | [onCreate(want: Want, param: AbilityConstant.LaunchParam): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityoncreate)<br>[onNewWant(want: Want, launchParams: AbilityConstant.LaunchParam): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant)<br>In multiton or singleton mode, the target ability completes data restoration in the **onCreate()** callback. In the callback, **launchParam.launchReason** is used to determine whether it is a continuation-based launch scenario. If it is, the data saved before continuation can be obtained from the **want** parameter.|
 | onRemoteTerminated?(): void; | application\ContinueCallback.d.ts | [onContinueDone(result: number): void;](../reference/apis/js-apis-distributedMissionManager.md#continuecallback) |
 | onSaveAbilityState?(outState: PacMap): void; | \@ohos.app.ability.UIAbility.d.ts | [onSaveState(reason: AbilityConstant.StateType, wantParam : {[key: string]: any}): AbilityConstant.OnSaveResult;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonsavestate) |
-| onRestoreAbilityState?(inState: PacMap): void; | \@ohos.app.ability.UIAbility.d.ts | [onCreate(want: Want, param: AbilityConstant.LaunchParam): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityoncreate)<br>After the application is restarted, the **onCreate()** callback is triggered. In the callback, **launchParam.launchReason** is used to determine whether it is a self-recovery scenario. If it is, the data saved before the restart can be obtained from the **want** parameter.|
+| onRestoreAbilityState?(inState: PacMap): void; | \@ohos.app.ability.UIAbility.d.ts | [onCreate(want: Want, param: AbilityConstant.LaunchParam): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityoncreate)<br>After an application is restarted, the **onCreate()** callback is triggered. In the callback, **launchParam.launchReason** is used to determine whether it is a self-recovery scenario. If it is, the data saved before the restart can be obtained from the **want** parameter.|
 | onInactive?(): void; | \@ohos.app.ability.UIAbility.d.ts | [onBackground(): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonbackground) |
 | onActive?(): void; | \@ohos.app.ability.UIAbility.d.ts | [onForeground(): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonforeground) |
 | onNewWant?(want: Want): void; | \@ohos.app.ability.UIAbility.d.ts | [onNewWant(want: Want, launchParams: AbilityConstant.LaunchParam): void;](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) |

en/application-dev/application-models/lifecycledata-switch.md

 # LifecycleData Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | update?(uri: string, valueBucket: rdb.ValuesBucket, predicates: dataAbility.DataAbilityPredicates, callback: AsyncCallback<number>): void; | \@ohos.application.DataShareExtensionAbility.d.ts | [update?(uri: string, predicates: dataSharePredicates.DataSharePredicates, valueBucket: ValuesBucket, callback: AsyncCallback<number>): void;](../reference/apis/js-apis-application-dataShareExtensionAbility.md#update) |
 | query?(uri: string, columns: Array<string>, predicates: dataAbility.DataAbilityPredicates, callback: AsyncCallback<ResultSet>): void; | \@ohos.application.DataShareExtensionAbility.d.ts | [query?(uri: string, predicates: dataSharePredicates.DataSharePredicates, columns: Array<string>, callback: AsyncCallback<Object>): void;](../reference/apis/js-apis-application-dataShareExtensionAbility.md#query) |

en/application-dev/application-models/lifecycleform-switch.md

 # LifecycleForm Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | onCreate?(want: Want): formBindingData.FormBindingData; | \@ohos.app.form.FormExtensionAbility.d.ts | [onAddForm(want: Want): formBindingData.FormBindingData;](../reference/apis/js-apis-app-form-formExtensionAbility.md#onaddform) |
 | onCastToNormal?(formId: string): void; | \@ohos.app.form.FormExtensionAbility.d.ts | [onCastToNormalForm(formId: string): void;](../reference/apis/js-apis-app-form-formExtensionAbility.md#oncasttonormalform) |

en/application-dev/application-models/lifecycleservice-switch.md

 # LifecycleService Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | onStart?(): void; | \@ohos.app.ability.ServiceExtensionAbility.d.ts | [onCreate(want: Want): void;](../reference/apis/js-apis-app-ability-serviceExtensionAbility.md#serviceextensionabilityoncreate) |
 | onCommand?(want: Want, startId: number): void; | \@ohos.app.ability.ServiceExtensionAbility.d.ts | [onRequest(want: Want, startId: number): void;](../reference/apis/js-apis-app-ability-serviceExtensionAbility.md#serviceextensionabilityonrequest) |  |

en/application-dev/application-models/medialibrary-switch.md

 # mediaLibrary Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | [getMediaLibrary(): MediaLibrary;](../reference/apis/js-apis-medialibrary.md#medialibrarygetmedialibrary) | \@ohos.multimedia.mediaLibrary.d.ts | [getMediaLibrary(context: Context): MediaLibrary;](../reference/apis/js-apis-medialibrary.md#medialibrarygetmedialibrary8) |

en/application-dev/application-models/model-switch-overview.md

@@ -5,19 +5,23 @@ Perform the following operations to switch a declarative paradigm-based applicat
 
 
 - Project switch: Create an application project of the stage model.
+
   ![model-switch-overview1](figures/model-switch-overview1.png)
 
 - [Configuration file switch](configuration-file-diff.md): Switch **config.json** to **app.json5** and **module.json5**.
+
   ![model-switch-overview2](figures/model-switch-overview2.png)
 
 - [Component switch](pageability-switch.md): Switch the PageAbility, ServiceAbility, and DataAbility components of the FA model to the UIAbility and ExtensionAbility components of the stage model. The figure below shows only the switching from PageAbility to UIAbility. The left part is the FA model, and **app.ets** is the PageAbility component. The right part is the stage model, and **EntryAbility.ts** is the UIAbility component.
 
-![model-switch-overview3](figures/model-switch-overview3.png)
+  ![model-switch-overview3](figures/model-switch-overview3.png)
 
 - [Widget switch](widget-switch.md): Switch the FormAbility component of the FA model to the FormExtensionAbility component of the stage model. In the figure below, **Service Widget** is FormAbility in the FA model and FormExtensionAbility in the stage model.
+
   ![model-switch-overview4](figures/model-switch-overview4.png)
 
   ![model-switch-overview5](figures/model-switch-overview5.png)
 
 - [API switch](api-switch-overview.md): Switch the APIs with the **FAModelOnly** tag used in the FA model to the recommended APIs in the stage model.
+
   ![model-switch-overview6](figures/model-switch-overview6.png)

en/application-dev/application-models/module-switch.md

 # Switching of module
 
 
-When switching an application from the FA model to the stage model, you must migrate the configurations under the **module** tag in the **config.json** file to the **module** tag in the **module.json5** file.
+When switching an application from the FA model to the stage model, migrate the configurations under **module** in the **config.json** file to **module** in the **module.json5** file.
 
 **Table 1** module comparison
 
@@ -60,7 +60,7 @@ When switching an application from the FA model to the stage model, you must mig
 | deviceCapability | Device capabilities required to run the ability.| / | This configuration is not supported in the stage model.|
 | metaData | Metadata of the ability.| metadata | For details, see Table 2.|
 | type | Ability type.| / | This configuration is not supported in the stage model.|
-| grantPermission | Whether permissions can be granted for any data in the ability.| / | The stage model does not support such a configuration under **abilities**.|
+| grantPermission | Whether permissions can be granted to any data in the ability.| / | The stage model does not support such a configuration under **abilities**.|
 | readPermission | Permission required for reading data in the ability. This field applies only to the ability using the Data template.| / | In the stage model, this configuration is available under **extensionAbilities**, but not **abilities**.|
 | writePermission | Permission required for writing data to the ability.| / | In the stage model, this configuration is available under **extensionAbilities**, but not **abilities**.|
 | configChanges | System configurations that the ability concerns.| / | This configuration is not supported in the stage model.|

en/application-dev/application-models/pageability-switch.md

@@ -27,7 +27,7 @@ The PageAbility lifecycle is basically the same as the UIAbility lifecycle. The
 3. Adjust the migrated code, since the methods of loading pages are different.
 
    - In the FA model, you can configure the page to be loaded by setting page information in **config.json**.
-   - In the stage model, you must call **windowStage.loadContent** in the **onWindowStageCreate** callback to load a page.
+   - In the stage model, call **windowStage.loadContent** in the **onWindowStageCreate** callback to load a page.
 
    For example, to load the **pages/Index** page after the ability is started, use the following code in the **config.json** file in the FA model:
 

en/application-dev/application-models/particleability-switch.md

 # particleAbility Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | [startAbility(parameter: StartAbilityParameter, callback: AsyncCallback&lt;number&gt;): void;](../reference/apis/js-apis-ability-particleAbility.md#particleabilitystartability)<br>[startAbility(parameter: StartAbilityParameter): Promise&lt;number&gt;;](../reference/apis/js-apis-ability-particleAbility.md#particleabilitystartability-1) | application\ServiceExtensionContext.d.ts | [startAbility(want: Want, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextstartability)<br>[startAbility(want: Want, options: StartOptions, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextstartability-2)<br>[startAbility(want: Want, options?: StartOptions): Promise&lt;void&gt;;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextstartability-1)<br>[startServiceExtensionAbility(want: Want, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextstartserviceextensionability)<br>[startServiceExtensionAbility(want: Want): Promise&lt;void&gt;;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextstartserviceextensionability-1) |
 | [terminateSelf(callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-ability-particleAbility.md#particleabilityterminateself)<br>[terminateSelf(): Promise&lt;void&gt;;](../reference/apis/js-apis-ability-particleAbility.md#particleabilityterminateself-1) | application\ServiceExtensionContext.d.ts | [terminateSelf(callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextterminateself)<br>[terminateSelf(): Promise&lt;void&gt;;](../reference/apis/js-apis-inner-application-serviceExtensionContext.md#serviceextensioncontextterminateself-1) |
@@ -10,3 +10,5 @@
 | [acquireDataAbilityHelper(uri: string): DataAbilityHelper;](../reference/apis/js-apis-ability-particleAbility.md#particleabilityacquiredataabilityhelper) | \@ohos.data.dataShare.d.ts<br>[\@ohos.data.fileAccess.d.ts | [createDataShareHelper(context: Context, uri: string, callback: AsyncCallback&lt;DataShareHelper&gt;): void;](../reference/apis/js-apis-data-dataShare.md#datasharecreatedatasharehelper)<br>[createDataShareHelper(context: Context, uri: string): Promise&lt;DataShareHelper&gt;;](../reference/apis/js-apis-data-dataShare.md#datasharecreatedatasharehelper-1)<br>[createFileAccessHelper(context: Context): FileAccessHelper;](../reference/apis/js-apis-fileAccess.md#fileaccesscreatefileaccesshelper-1)<br>[createFileAccessHelper(context: Context, wants: Array&lt;Want&gt;): FileAccessHelper;](../reference/apis/js-apis-fileAccess.md#fileaccesscreatefileaccesshelper) |
 | [startBackgroundRunning(id: number, request: NotificationRequest, callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-ability-particleAbility.md#particleabilitystartbackgroundrunning)<br>[startBackgroundRunning(id: number, request: NotificationRequest): Promise&lt;void&gt;;](../reference/apis/js-apis-ability-particleAbility.md#particleabilitystartbackgroundrunning-1) | \@ohos.resourceschedule.backgroundTaskManager.d.ts | [startBackgroundRunning(context: Context, bgMode: BackgroundMode, wantAgent: WantAgent, callback: AsyncCallback): void;](../reference/apis/js-apis-resourceschedule-backgroundTaskManager.md#backgroundtaskmanagerstartbackgroundrunningcallback)<br>[startBackgroundRunning(context: Context, bgMode: BackgroundMode, wantAgent: WantAgent): Promise&lt;void&gt;;](../reference/apis/js-apis-resourceschedule-backgroundTaskManager.md#backgroundtaskmanagerstartbackgroundrunningpromise) |
 | [cancelBackgroundRunning(callback: AsyncCallback&lt;void&gt;): void;](../reference/apis/js-apis-ability-particleAbility.md#particleabilitycancelbackgroundrunning)<br>[cancelBackgroundRunning(): Promise&lt;void&gt;;](../reference/apis/js-apis-ability-particleAbility.md#particleabilitycancelbackgroundrunning-1) | \@ohos.resourceschedule.backgroundTaskManager.d.ts | [stopBackgroundRunning(context: Context, callback: AsyncCallback): void;](../reference/apis/js-apis-resourceschedule-backgroundTaskManager.md#backgroundtaskmanagerstopbackgroundrunningcallback)<br>[stopBackgroundRunning(context: Context): Promise&lt;void&gt;;](../reference/apis/js-apis-resourceschedule-backgroundTaskManager.md#backgroundtaskmanagerstopbackgroundrunningpromise) |
+
+ <!--no_check--> 
\ No newline at end of file

en/application-dev/application-models/process-model-fa.md

@@ -8,9 +8,9 @@ The OpenHarmony process model is shown below.
 
 - WebView has an independent rendering process, which is **Render process** in yellow in the figure.
 
-  **Figure 1** Process model 
+**Figure 1** Process model
 
-  ![process-model-fa](figures/process-model-fa.png)
+![process-model-fa](figures/process-model-fa.png)
 
 
 OpenHarmony provides two inter-process communication (IPC) mechanisms.
@@ -19,4 +19,3 @@ OpenHarmony provides two inter-process communication (IPC) mechanisms.
 - [Common Events](common-event-fa.md): This mechanism is used in one-to-many communication scenarios. Multiple subscribers may receive events at the same time.
 
 - [Background Services](rpc.md): This mechanism is implemented through [ServiceAbility](serviceability-overview.md).
-

en/application-dev/application-models/request-switch.md

 # request Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | [download(config: DownloadConfig, callback: AsyncCallback&lt;DownloadTask&gt;): void;](../reference/apis//js-apis-request.md#requestdownload-1)<br>[download(config: DownloadConfig): Promise&lt;DownloadTask&gt;;](../reference/apis/js-apis-request.md#requestdownload) | \@ohos.request.d.ts | [downloadFile(context: BaseContext, config: DownloadConfig, callback: AsyncCallback&lt;DownloadTask&gt;): void;](../reference/apis/js-apis-request.md#requestdownloadfile9-1)<br>[downloadFile(context: BaseContext, config: DownloadConfig): Promise&lt;DownloadTask&gt;;](../reference/apis/js-apis-request.md#requestdownloadfile9) |
 | [upload(config: UploadConfig, callback: AsyncCallback&lt;UploadTask&gt;): void;](../reference/apis/js-apis-request.md#requestupload-1)<br>[upload(config: UploadConfig): Promise&lt;UploadTask&gt;;](../reference/apis/js-apis-request.md#requestupload) | \@ohos.request.d.ts | [uploadFile(context: BaseContext, config: UploadConfig, callback: AsyncCallback&lt;UploadTask&gt;): void;](../reference/apis/js-apis-request.md#requestuploadfile9-1)<br>[uploadFile(context: BaseContext, config: UploadConfig): Promise&lt;UploadTask&gt;;](../reference/apis/js-apis-request.md#requestuploadfile9) |

en/application-dev/application-models/resourcemanager-switch.md

 # resourceManager Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding Field in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding Field in the Stage Model| 
 | -------- | -------- | -------- |
 | [getResourceManager(callback: AsyncCallback&lt;ResourceManager&gt;): void;](../reference/apis/js-apis-resource-manager.md#resourcemanagergetresourcemanager)<br>[getResourceManager(bundleName: string, callback: AsyncCallback&lt;ResourceManager&gt;): void;](../reference/apis/js-apis-resource-manager.md#resourcemanagergetresourcemanager-1)<br>[getResourceManager(): Promise&lt;ResourceManager&gt;;](../reference/apis/js-apis-resource-manager.md#resourcemanagergetresourcemanager-2)<br>[getResourceManager(bundleName: string): Promise&lt;ResourceManager&gt;;](../reference/apis/js-apis-resource-manager.md#resourcemanagergetresourcemanager-3) | application\Context.d.ts | [resourceManager: resmgr.ResourceManager;](../reference/apis/js-apis-inner-application-context.md#attributes)|

en/application-dev/application-models/serviceability-switch.md

@@ -4,9 +4,9 @@
 The ServiceAbility component in the FA model corresponds to the ServiceExtensionAbility component in the stage model. The ServiceExtensionAbility class provides system APIs. Only system applications can create ServiceExtensionAbility instances. Therefore, ServiceAbility switching adopts different policies for system applications and third-party applications.  
 
 
-## Switching a ServiceAbility of a System Application
+## Switching a ServiceAbility for a System Application
 
-The procedure for switching a ServiceAbility of a system application is similar to the procedure of PageAbility switching.
+The procedure for switching a ServiceAbility for a system application is similar to the procedure of PageAbility switching.
 
 1. [Create a ServiceExtensionAbility](serviceextensionability.md) in the stage model.
 
@@ -24,7 +24,7 @@ The table below describes the lifecycle comparison of the ServiceAbility and Ser
    | onStop(): void | onDestroy(): void | The two methods have the same meaning, invoking time, and parameters.|
 
 
-## Switching a ServiceAbility of a Third-Party Application
+## Switching a ServiceAbility for a Third-Party Application
 
 In the stage model, third-party applications cannot provide services for other third-party applications. You can select a switching solution based on your service requirements.
 

en/application-dev/application-models/storage-switch.md

 # Storage Switching
 
 
-  | API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model| 
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | GetStorageOptions | There is no corresponding API in the stage model.| The stage model uses **Prefereces** to replace **Storage** and has redesigned the input parameters.| 
 | SetStorageOptions | There is no corresponding API in the stage model.| The stage model uses **Prefereces** to replace **Storage** and has redesigned the input parameters.| 

en/application-dev/application-models/subscribe-system-environment-variable-changes.md

 # Subscribing to System Environment Variable Changes
 
-System environment variables are system settings (for example, the system language or screen direction) of a device that may change during the running of an application.
+System environment variables are system settings (for example, the system language or screen orientation) of a device that may change during the running of an application.
 
 By subscribing to the changes of system environment variables, the application can detect the changes in a timely manner and process the changes accordingly, providing better user experience. For example, when the system language changes, the application can display the UI in the new language; when the user rotates the device to landscape or portrait mode, the application can re-arrange the UI to adapt to the new screen orientation and size.
 

en/application-dev/application-models/thread-model-fa.md

 # Thread Model Overview (FA Model)
 
+
 There are three types of threads in the FA model:
 
+
 - Main thread
 
   Manages other threads.
@@ -14,8 +16,8 @@ There are three types of threads in the FA model:
   - Receives messages sent by the worker thread.
 
 - Worker thread
-  
-  Performs time-consuming operations
+
+  Performs time-consuming operations.
 
 Based on the OpenHarmony thread model, different services run on different threads. Service interaction requires inter-thread communication. Threads can communicate with each other in Emitter or Worker mode. Emitter is mainly used for event synchronization between threads, and Worker is mainly used to execute time-consuming tasks.
 

en/application-dev/application-models/uiability-data-sync-with-ui.md

-# Data Synchronization Between UIAbility and UI
+# Data Synchronization Between UIAbility and UI Page
 
 
-Based on the OpenHarmony application model, you can use any of the following ways to implement data synchronization between the UIAbility component and UI:
+Based on the OpenHarmony application model, you can use any of the following ways to implement data synchronization between UIAbility components and UI pages:
 
-- [Using EventHub for Data Synchronization](#using-eventhub-for-data-synchronization): The **EventHub** object is provided by the base class **Context**. Events are transferred using the publish/subscribe (pub/sub) pattern. Specifically, after subscribing to an event, your application will receive the event and process it accordingly when the event is published.
-- [Using globalThis for Data Synchronization](#using-globalthis-for-data-synchronization): **globalThis** is a global object inside the ArkTS engine instance and can be accessed by components such as UIAbility, ExtensionAbility, and Page.
+- [Using EventHub for Data Synchronization](#using-eventhub-for-data-synchronization): The **EventHub** object is provided by the base class **Context**. It allows events to be transferred using the publish/subscribe (pub/sub) pattern. Specifically, after subscribing to an event, your application will receive the event and process it accordingly when the event is published.
+- [Using globalThis for Data Synchronization](#using-globalthis-for-data-synchronization): **globalThis** is a global object inside the ArkTS engine instance and can be accessed by components such as UIAbility, ExtensionAbility, and UI page.
 - [Using AppStorage or LocalStorage for Data Synchronization](#using-appstorage-or-localstorage-for-data-synchronization): ArkUI provides two application-level state management solutions: AppStorage and LocalStorage, which implement application- and UIAbility-level data synchronization, respectively.
 
 
@@ -12,7 +12,7 @@ Based on the OpenHarmony application model, you can use any of the following way
 
 [EventHub](../reference/apis/js-apis-inner-application-eventHub.md) provides an event mechanism for the UIAbility or ExtensionAbility component so that they can subscribe to, unsubscribe from, and trigger events.
 
-Before using the APIs provided by **EventHub**, you must obtain an **EventHub** object, which is provided by the [base class Context](application-context-stage.md). This section uses EventHub as an example to describe how to implement data synchronization between the UIAbility component and the UI.
+Before using the APIs provided by **EventHub**, you must obtain an **EventHub** object, which is provided by the [base class Context](application-context-stage.md). 
 
 1. Call [eventHub.on()](../reference/apis/js-apis-inner-application-eventHub.md#eventhubon) in the UIAbility in either of the following ways to register a custom event **event1**.
 
@@ -40,7 +40,7 @@ Before using the APIs provided by **EventHub**, you must obtain an **EventHub**
    }
    ```
 
-2. Call [eventHub.emit()](../reference/apis/js-apis-inner-application-eventHub.md#eventhubemit) on the UI to trigger the event, and pass the parameters as required.
+2. Call [eventHub.emit()](../reference/apis/js-apis-inner-application-eventHub.md#eventhubemit) on the UI page to trigger the event, and pass in the parameters as required.
 
    ```ts
    import common from '@ohos.app.ability.common';
@@ -60,14 +60,14 @@ Before using the APIs provided by **EventHub**, you must obtain an **EventHub**
        // You can design the parameters based on your service requirements.
      }
 
-     // Page display.
+     // UI page display.
      build() {
        ...
      }
    }
    ```
 
-3. Obtain the event trigger result from the subscription callback of UIAbility. The run log result is as follows:
+3. Obtain the event trigger result from the subscription callback of the UIAbility. The run log result is as follows:
 
    ```ts
    []
@@ -77,7 +77,7 @@ Before using the APIs provided by **EventHub**, you must obtain an **EventHub**
    [2,'test']
    ```
 
-4. After **event1** is used, you can call [eventHub.off()](../reference/apis/js-apis-inner-application-eventHub.md#eventhuboff) to unsubscribe from the event.
+4. When **event1** is not needed, call [eventHub.off()](../reference/apis/js-apis-inner-application-eventHub.md#eventhuboff) to unsubscribe from the event.
 
    ```ts
    // context is the AbilityContext of the UIAbility instance.
@@ -87,7 +87,7 @@ Before using the APIs provided by **EventHub**, you must obtain an **EventHub**
 
 ## Using globalThis for Data Synchronization
 
-**globalThis** is a global object inside the [ArkTS engine instance](thread-model-stage.md) and can be used by UIAbility, ExtensionAbility, and Page inside the engine. Therefore, you can use **globalThis** for data synchronization.
+**globalThis** is a global object inside the [ArkTS engine instance](thread-model-stage.md) and can be used by UIAbility, ExtensionAbility, and UI page inside the engine. Therefore, you can use **globalThis** for data synchronization.
 
 **Figure 1** Using globalThis for data synchronization
 ![globalThis1](figures/globalThis1.png)
@@ -95,16 +95,16 @@ Before using the APIs provided by **EventHub**, you must obtain an **EventHub**
 
 The following describes how to use **globalThis** in three scenarios. Precautions are provided as well.
 
-- [Using globalThis Between UIAbility and Page](#using-globalthis-between-uiability-and-page)
+- [Using globalThis Between UIAbility and UI Page](#using-globalthis-between-uiability-and-ui-page)
 - [Using globalThis Between UIAbility and UIAbility](#using-globalthis-between-uiability-and-uiability)
-- [Use globalThis Between UIAbility and ExtensionAbility](#using-globalthis-between-uiability-and-extensionability)
+- [Using globalThis Between UIAbility and ExtensionAbility](#using-globalthis-between-uiability-and-extensionability)
 - [Precautions for Using globalThis](#precautions-for-using-globalthis)
 
-### Using globalThis Between UIAbility and Page
+### Using globalThis Between UIAbility and UI Page
 
-By binding attributes or methods to **globalThis**, you can implement data synchronization between the UIAbility component and UI. For example, if you bind the **want** parameter in the UIAbility component, you can use the **want** parameter information on the UI corresponding to the UIAbility component.
+To implement data synchronization between the UIAbility component and UI page, you can bind attributes or methods to **globalThis**. For example, if you bind the **want** parameter in the UIAbility component, you can use the **want** parameter information on the UI page corresponding to the UIAbility component.
 
-1. When [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called to start a UIAbility instance, the [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) callback is invoked, and the **want** parameter can be passed in the callback. Therefore, you can bind the **want** parameter to **globalThis**.
+1. When [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called to start a UIAbility instance, the [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) callback is invoked, and the **want** parameter can be passed in the callback. Bind the **want** parameter to **globalThis**.
 
    ```ts
    import UIAbility from '@ohos.app.ability.UIAbility';
@@ -119,7 +119,7 @@ By binding attributes or methods to **globalThis**, you can implement data synch
    }
    ```
 
-2. Use **globalThis** on the UI to obtain the **want** parameter information.
+2. Use **globalThis** on the UI page to obtain the **want** parameter information.
 
    ```ts
    let entryAbilityWant;
@@ -131,7 +131,7 @@ By binding attributes or methods to **globalThis**, you can implement data synch
        entryAbilityWant = globalThis.entryAbilityWant;
      }
    
-     // Page display.
+     // UI page display.
      build() {
        ...
      }
@@ -143,7 +143,7 @@ By binding attributes or methods to **globalThis**, you can implement data synch
 
 To implement data synchronization between two UIAbility components in the same application, you can bind data to **globalThis**. For example, you can save data in **globalThis** in UIAbilityA and obtain the data from UIAbilityB.
 
-1. UIAbilityA stores a string and binds it to globalThis.
+1. Save data in UIAbilityA and bind it to **globalThis**.
 
    ```ts
    import UIAbility from '@ohos.app.ability.UIAbility'
@@ -175,7 +175,7 @@ To implement data synchronization between two UIAbility components in the same a
 
 To implement data synchronization between the UIAbility and ExtensionAbility components in the same application, you can bind data to **globalThis**. For example, you can save data in **globalThis** in UIAbilityA and obtain the data from ServiceExtensionAbility.
 
-1. UIAbilityA stores a string and binds it to globalThis.
+1. Save data in UIAbilityA and bind it to **globalThis**.
 
    ```ts
    import UIAbility from '@ohos.app.ability.UIAbility'
@@ -206,18 +206,18 @@ To implement data synchronization between the UIAbility and ExtensionAbility com
 
 ### Precautions for Using globalThis
 
-**Figure 2** Precautions for globalThis 
+**Figure 2** Precautions for using globalThis 
 ![globalThis2](figures/globalThis2.png)
 
 - In the stage model, all the UIAbility components in a process share one ArkTS engine instance. When using **globalThis**, do not store objects with the same name. For example, if UIAbilityA and UIAbilityB use **globalThis** to store two objects with the same name, the object stored earlier will be overwritten.
 
 - This problem does not occur in the FA model because each UIAbility component uses an independent engine.
 
-- The lifecycle of an object bound to **globalThis** is the same as that of the ArkTS engine instance. You are advised to assign the value **null** after using the object to minimize memory usage.
+- The lifecycle of an object bound to **globalThis** is the same as that of the ArkTS engine instance. To minimize memory usage, you are advised to assign the value **null** to the object when it is not in use.
 
 The following provides an example to describe the object overwritten problem in the stage model.
 
-1. In the UIAbilityA file, [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) is stored in **globalThis**.
+1. In the UIAbilityA file, use **globalThis** to store [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md).
 
    ```ts
    import UIAbility from '@ohos.app.ability.UIAbility'
@@ -230,7 +230,7 @@ The following provides an example to describe the object overwritten problem in
    }
    ```
 
-2. Obtain and use [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) on the page of UIAbilityA. After the UIAbilityA instance is used, switch it to the background.
+2. Obtain and use [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) on the UI page of UIAbilityA. When the UIAbilityA instance is not in use, switch it to the background.
 
    ```ts
    @Entry
@@ -239,14 +239,14 @@ The following provides an example to describe the object overwritten problem in
      onPageShow() {
        let ctx = globalThis.context; // Obtain the context from globalThis and use it.
      }
-     // Page display.
+     // UI page display.
      build() {
        ...
      }
    }
    ```
 
-3. In the UIAbilityB file, [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) is stored in **globalThis** and has the same name as that in the UIAbilityA file.
+3. In the UIAbilityB file, use **globalThis** to store [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md), which is named the same as that in the UIAbilityA file.
 
    ```ts
    import UIAbility from '@ohos.app.ability.UIAbility'
@@ -260,7 +260,7 @@ The following provides an example to describe the object overwritten problem in
    }
    ```
 
-4. Obtain and use [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) on the page of UIAbilityB. The obtained **globalThis.context** is the value of [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) in UIAbilityB.
+4. Obtain [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) from the UI page of UIAbilityB and use it. The obtained **globalThis.context** is the value of [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) in UIAbilityB.
 
    ```ts
    @Entry
@@ -269,7 +269,7 @@ The following provides an example to describe the object overwritten problem in
      onPageShow() {
        let ctx = globalThis.context; // Obtain the context from globalThis and use it.
      }
-     // Page display.
+     // UI page display.
      build() {
        ...
      }
@@ -289,7 +289,7 @@ The following provides an example to describe the object overwritten problem in
    }
    ```
 
-6. When the page of UIAbilityA is displayed, the obtained **globalThis.context** is [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) of UIAbilityB instead of UIAbilityA. An error occurs.
+6. When the UI page of UIAbilityA is displayed, the obtained **globalThis.context** is the value of [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md) of UIAbilityB instead of UIAbilityA. An error occurs.
 
    ```ts
    @Entry
@@ -298,7 +298,7 @@ The following provides an example to describe the object overwritten problem in
      onPageShow() {
        let ctx = globalThis.context; // The context in globalThis is the context of UIAbilityB.
      }
-     // Page display.
+     // UI page display.
      build() {
        ...
      }
@@ -307,4 +307,4 @@ The following provides an example to describe the object overwritten problem in
 
 ## Using AppStorage or LocalStorage for Data Synchronization
 
-ArkUI provides AppStorage and LocalStorage to implement application- and UIAbility-level data synchronization, respectively. Both solutions can be used to manage the application state, enhance application performance, and improve user experience. The AppStorage is a global state manager and is applicable when multiple UIAbilities share the same state data. The LocalStorage is a local state manager that manages state data used inside a single UIAbility. They help you control the application state more flexibly and improve the maintainability and scalability of applications. For details, see [State Management of Application-Level Variables](../quick-start/arkts-application-state-management-overview.md).
+ArkUI provides AppStorage and LocalStorage to implement application- and UIAbility-level data synchronization, respectively. Both solutions can be used to manage the application state, enhance application performance, and improve user experience. The AppStorage is a global state manager that manages state data shared among multiple UIAbilities. The LocalStorage is a local state manager that manages state data used inside a single UIAbility. They help you control the application state more flexibly and improve the maintainability and scalability of applications. For details, see [State Management of Application-Level Variables](../quick-start/arkts-application-state-management-overview.md).

en/application-dev/application-models/uiability-launch-type.md

-# UIAbility Component Launch Type
+# UIAbility Launch Type
 
 
-The launch type of the UIAbility component refers to the state of the UIAbility instance at startup. The system provides three launch types:
+The launch type of the UIAbility component refers to the state of the UIAbility instance at startup. Three launch types are available:
 
 
 - [Singleton](#singleton)
@@ -15,7 +15,7 @@ The launch type of the UIAbility component refers to the state of the UIAbility
 
 **singleton** is the default launch type.
 
-Each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called, if a UIAbility instance of this type already exists in the application process, the instance is reused. Therefore, only one UIAbility instance of this type exists in the system, that is, displayed in **Recents**.
+Each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called, if a UIAbility instance of this type already exists in the application process, the instance is reused. In other words, UIAbility of this type can have only one instance in the system, meaning that only one mission is displayed in the system application Recents.
 
 **Figure 1** Demonstration effect in singleton mode
 
@@ -23,9 +23,9 @@ Each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbility
 
 > **NOTE**
 >
-> Assume that the application already has a UIAbility instance created, and the launch type of the UIAbility instance is set to **singleton**. If [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called again to start the UIAbility instance, the original UIAbility instance is started, and no new UIAbility instance is created. In this case, the [onNewWant()](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) callback is invoked, but the [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) and [onWindowStageCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityonwindowstagecreate) callbacks are not.
+> If [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called to start an existing UIAbility instance in singleton mode, that instance is started, and no new UIAbility instance is created. In this case, the [onNewWant()](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) callback is invoked, but the [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) and [onWindowStageCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityonwindowstagecreate) callbacks are not.
 
-To use the singleton mode, set **launchType** in the [module.json5 configuration file](../quick-start/module-configuration-file.md) to **singleton**.
+To use the singleton mode, set **launchType** in the [module.json5 file](../quick-start/module-configuration-file.md) to **singleton**.
 
 
 ```json
@@ -45,7 +45,7 @@ To use the singleton mode, set **launchType** in the [module.json5 configuration
 
 ## Multiton
 
-In multiton mode, each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called, a new UIAbility instance of this type is created in the application process. Multiple UIAbility instances of this type are displayed in **Recents**.  
+In multiton mode, each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called, a new UIAbility instance is created in the application process. Multiple missions are displayed for UIAbility of this type in Recents.  
 
 **Figure 2** Demonstration effect in multiton mode
 
@@ -71,15 +71,15 @@ To use the multiton mode, set **launchType** in the [module.json5 file](../quick
 
 ## Specified
 
-The **specified** mode is used in some special scenarios. For example, in a document application, you want a document instance to be created each time you create a document, but you want to use the same document instance when you repeatedly open an existing document.
+The **specified** mode is used in some special scenarios. For example, in a document application, you may want a document instance to be created each time you create a document, and you may also want to use the same document instance when you open an existing document.
 
 **Figure 3** Demonstration effect in specified mode
 
 ![uiability-launch-type3](figures/uiability-launch-type3.gif)  
 
-For example, there are two UIAbility components: EntryAbility and SpecifiedAbility (with the launch type **specified**). You are required to start SpecifiedAbility from EntryAbility.
+In the following example, there are two UIAbility components: EntryAbility and SpecifiedAbility (with the launch type **specified**). To start SpecifiedAbility from EntryAbility, proceed as follows:
 
-1. In SpecifiedAbility, set the **launchType** field in the [module.json5 file](../quick-start/module-configuration-file.md) to **specified**.
+1. In SpecifiedAbility, set **launchType** in the [module.json5 file](../quick-start/module-configuration-file.md) to **specified**.
 
    ```json
    {
@@ -95,10 +95,10 @@ For example, there are two UIAbility components: EntryAbility and SpecifiedAbili
    }
    ```
 
-2. Create a unique string key for the instance. Each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called, the application, based on the key, identifies the UIAbility instance used to respond to the request. In EntryAbility, add a custom parameter, for example, **instanceKey**, to the **want** parameter in [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) to distinguish the UIAbility instance.
+2. Create a unique string key for the SpecifiedAbility instance. Each time [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called, the application, based on the key, identifies the UIAbility instance used to respond to the request. In EntryAbility, add a custom parameter, for example, **instanceKey**, to the **want** parameter in [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) to distinguish the UIAbility instances.
 
    ```ts
-   // Configure an independent key for each UIAbility instance.
+   // Configure a unique key for each UIAbility instance.
    // For example, in the document usage scenario, use the document path as the key.
    function getInstance() {
      ...
@@ -122,16 +122,16 @@ For example, there are two UIAbility components: EntryAbility and SpecifiedAbili
    })
    ```
 
-3. Before SpecifiedAbility is started, the [onAcceptWant()](../reference/apis/js-apis-app-ability-abilityStage.md#abilitystageonacceptwant) callback of the corresponding AbilityStage instance is invoked to obtain the key of the UIAbility, because the launch type of SpecifiedAbility is set to **specified**. If a UIAbility instance matching the key exists, the system starts the UIAbility instance and invokes its [onNewWant()](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) callback. Otherwise, the system creates a new UIAbility instance and invokes its [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) and [onWindowStageCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityonwindowstagecreate) callbacks.
+3. Before SpecifiedAbility is started, the [onAcceptWant()](../reference/apis/js-apis-app-ability-abilityStage.md#abilitystageonacceptwant) callback of the corresponding AbilityStage instance is invoked to obtain the key of the target UIAbility. If a UIAbility instance matching the key exists, the system starts the UIAbility instance and invokes its [onNewWant()](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) callback. Otherwise, the system creates a new UIAbility instance and invokes its [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) and [onWindowStageCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityonwindowstagecreate) callbacks.
 
-   In the sample code, the [onAcceptWant()](../reference/apis/js-apis-app-ability-abilityStage.md#abilitystageonacceptwant) callback parses the **want** parameter to obtain the custom parameter **instanceKey**. The service logic returns a key string based on **instanceKey** parameter to identify the UIAbility instance. If the returned key maps to a started UIAbility instance, the system pulls the UIAbility instance back to the foreground and obtains the focus. If the returned key does not map to a started UIAbility instance, the system creates a new UIAbility instance and starts it.
+   In the sample code, the [onAcceptWant()](../reference/apis/js-apis-app-ability-abilityStage.md#abilitystageonacceptwant) callback uses the passed **want** parameter to obtain the custom parameter **instanceKey**. The service logic returns a key string based on the **instanceKey** parameter to identify the UIAbility instance. If the returned key maps to a started UIAbility instance, the system pulls the UIAbility instance back to the foreground and gives it the focus. If the returned key does not map to a started UIAbility instance, the system creates a new UIAbility instance and starts it.
 
    ```ts
    import AbilityStage from '@ohos.app.ability.AbilityStage';
    
    export default class MyAbilityStage extends AbilityStage {
      onAcceptWant(want): string {
-       // In the AbilityStage instance of the callee, a key value corresponding to a UIAbility instance is returned for UIAbility whose launch type is specified.
+       // In the AbilityStage instance of the callee, a key string corresponding to a UIAbility instance is returned for UIAbility whose launch type is specified.
        // In this example, SpecifiedAbility of module1 is returned.
        if (want.abilityName === 'SpecifiedAbility') {
          // The returned key string is a custom string.
@@ -145,15 +145,16 @@ For example, there are two UIAbility components: EntryAbility and SpecifiedAbili
 
    > **NOTE**
    >
-   > 1. Assume that the application already has a UIAbility instance created, and the launch type of the UIAbility instance is set to **specified**. If [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called again to start the UIAbility instance, and the [onAcceptWant()](../reference/apis/js-apis-app-ability-abilityStage.md#abilitystageonacceptwant) callback of [AbilityStage](../reference/apis/js-apis-app-ability-abilityStage.md) matches a created UIAbility instance, the original UIAbility instance is started, and no new UIAbility instance is created. In this case, the [onNewWant()](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) callback is invoked, but the [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) and [onWindowStageCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityonwindowstagecreate) callbacks are not.
-   > 2. AbilityStage is not automatically generated in the default project of DevEco Studio. For details about how to create an AbilityStage file, see [AbilityStage Component Container](abilitystage.md).
-
-   For example, in the document application, different keys are bound to different document instances. Each time a document is created, a new key (for example, file path) is passed, and a new UIAbility instance is created when UIAbility is started in AbilityStage. However, when you open an existing document, the same UIAbility instance is started again in AbilityStage.
+   > - If [startAbility()](../reference/apis/js-apis-inner-application-uiAbilityContext.md#uiabilitycontextstartability) is called to start an existing UIAbility instance in specified mode, and the [onAcceptWant()](../reference/apis/js-apis-app-ability-abilityStage.md#abilitystageonacceptwant) callback of [AbilityStage](../reference/apis/js-apis-app-ability-abilityStage.md) matches that UIAbility instance, that instance is started, and no new UIAbility instance is created. In this case, the [onNewWant()](../reference/apis/js-apis-app-ability-uiAbility.md#abilityonnewwant) callback is invoked, but the [onCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityoncreate) and [onWindowStageCreate()](../reference/apis/js-apis-app-ability-uiAbility.md#uiabilityonwindowstagecreate) callbacks are not.
+   >
+   > - AbilityStage is not automatically generated by default in the project of DevEco Studio. For details about how to create an AbilityStage file, see [AbilityStage Component Container](abilitystage.md).
+   
 
-   The following steps are used as an example.
+For example, in the document application, different keys are bound to different document instances. Each time a document is created, a new key (for example, file path) is passed in, and a new UIAbility instance is created when UIAbility is started in AbilityStage. However, when an existing document is opened, the same UIAbility instance is started again in AbilityStage.
 
-   1. Open file A. A UIAbility instance, for example, UIAbility instance 1, is started.
-   2. Close the process of file A in **Recents**. UIAbility instance 1 is destroyed. Return to the home screen and open file A again. A new UIAbility instance is started, for example, UIAbility instance 2.
-   3. Return to the home screen and open file B. A new UIAbility instance is started, for example, UIAbility instance 3.
-   4. Return to the home screen and open file A again. UIAbility instance 2 is started. This is because the system automatically matches the key of the UIAbility instance and starts the UIAbility instance that has a matching key. In this example, UIAbility instance 2 has the same key as file A. Therefore, the system pulls back UIAbility instance 2 and focuses it without creating a new instance.
+The following steps are used as an example.
 
+   1. Open file A. A UIAbility instance, UIAbility instance 1, is started.
+   2. Close the process of file A in Recents. UIAbility instance 1 is destroyed. Return to the home screen and open file A again. A new UIAbility instance, UIAbility instance 2, is started.
+   3. Return to the home screen and open file B. A new UIAbility instance, UIAbility instance 3, is started.
+   4. Return to the home screen and open file A again. UIAbility instance 2 is started. This is because the system automatically matches the key with the UIAbility instance and starts the UIAbility instance that has a matching key. In this example, UIAbility instance 2 has the same key as file A. Therefore, the system pulls back UIAbility instance 2 and focuses it without creating a new instance.hao 

en/application-dev/application-models/uiability-lifecycle.md

-# UIAbility Component Lifecycle
+# UIAbility Lifecycle
 
 
 ## Overview
 
-When a user opens, switches, and returns to an application, the UIAbility instances in the application transit in their different states. The UIAbility class provides a series of callbacks. Through these callbacks, you can know the state changes of the UIAbility instance, for example, being created or destroyed, or running in the foreground or background.
+When a user opens or switches to and from an application, the UIAbility instances in the application transit in their different states. The UIAbility class provides a series of callbacks. Through these callbacks, you can know the state changes of the UIAbility instance.
 
 The lifecycle of UIAbility has four states: **Create**, **Foreground**, **Background**, and **Destroy**, as shown in the figure below.
 
@@ -17,7 +17,7 @@ The lifecycle of UIAbility has four states: **Create**, **Foreground**, **Backgr
 
 ### Create
 
-The **Create** state is triggered when the UIAbility instance is created during application loading. The system invokes the **onCreate()** callback. In this callback, you can perform application initialization operations, for example, defining variables or loading resources.
+The **Create** state is triggered when the UIAbility instance is created during application loading. It corresponds to the **onCreate()** callback. In this callback, you can perform application initialization operations, for example, defining variables or loading resources.
 
 
 ```ts
@@ -33,13 +33,14 @@ export default class EntryAbility extends UIAbility {
 
 > **NOTE**
 >
-> [Want](../reference/apis/js-apis-app-ability-want.md) is used as the carrier to transfer information between application components. For details, see [Want](want-overview.md).
+> The [want](../reference/apis/js-apis-app-ability-want.md) parameter in the **onCreate()** callback is used as the carrier to transfer information between application components. For details, see [Want](want-overview.md).
 
 ### WindowStageCreate and WindowStageDestory
 
 After the UIAbility instance is created but before it enters the **Foreground** state, the system creates a WindowStage instance and triggers the **onWindowStageCreate()** callback. You can set UI loading and WindowStage event subscription in the callback.
 
-**Figure 2** WindowStageCreate and WindowStageDestory 
+**Figure 2** WindowStageCreate and WindowStageDestory
+
 ![Ability-Life-Cycle-WindowStage](figures/Ability-Life-Cycle-WindowStage.png)  
 
 In the **onWindowStageCreate()** callback, use [loadContent()](../reference/apis/js-apis-window.md#loadcontent9-2) to set the page to be loaded, and call [on('windowStageEvent')](../reference/apis/js-apis-window.md#onwindowstageevent9) to subscribe to [WindowStage events](../reference/apis/js-apis-window.md#windowstageeventtype9), for example, having or losing focus, or becoming visible or invisible.
@@ -78,7 +79,7 @@ export default class EntryAbility extends UIAbility {
       JSON.stringify(exception));
     }
 
-    // Set UI loading.
+    // Set the page to be loaded.
     windowStage.loadContent('pages/Index', (err, data) => {
       ...
     });
@@ -86,7 +87,7 @@ export default class EntryAbility extends UIAbility {
 }
 ```
 
-> **NOTE**<br>
+> **NOTE**
 >
 > For details about how to use WindowStage, see [Window Development](../windowmanager/application-window-stage.md).
 
@@ -121,15 +122,15 @@ export default class EntryAbility extends UIAbility {
 
 ### Foreground and Background
 
-The **Foreground** and **Background** states are triggered when the UIAbility instance is switched to the foreground and background respectively. They correspond to the **onForeground()** and **onBackground()** callbacks.
+The **Foreground** and **Background** states are triggered when the UIAbility instance is switched to the foreground and background, respectively. They correspond to the **onForeground()** and **onBackground()** callbacks.
 
-The **onForeground()** callback is triggered before the UI of the UIAbility instance becomes visible, for example, when the UIAbility instance is switched to the foreground. In this callback, you can apply for resources required by the system or re-apply for resources that have been released in the **onBackground()** callback.
+The **onForeground()** callback is triggered when the UI of the UIAbility instance is about to become visible, for example, when the UIAbility instance is about to enter the foreground. In this callback, you can apply for resources required by the system or re-apply for resources that have been released in the **onBackground()** callback.
 
-The **onBackground()** callback is triggered after the UI of the UIAbility component is completely invisible, for example, when the UIAbility instance is switched to the background. In this callback, you can release useless resources or perform time-consuming operations such as saving the status.
+The **onBackground()** callback is triggered when the UI of the UIAbility instance is about to become invisible, for example, when the UIAbility instance is about to enter the background. In this callback, you can release unused resources or perform time-consuming operations such as saving the status.
 
-For example, an application needs to use positioning, and the application has requested the positioning permission from the user. Before the UI is displayed, you can enable positioning in the **onForeground()** callback to obtain the location information.
+For example, there is an application that requires location access and has obtained the location permission from the user. Before the UI is displayed, you can enable location in the **onForeground()** callback to obtain the location information.
 
-When the application is switched to the background, you can disable positioning in the **onBackground()** callback to reduce system resource consumption.
+When the application is switched to the background, you can disable location in the **onBackground()** callback to reduce system resource consumption.
 
 
 ```ts
@@ -143,7 +144,7 @@ export default class EntryAbility extends UIAbility {
   }
 
   onBackground() {
-    // Release useless resources when the UI is invisible, or perform time-consuming operations in this callback,
+    // Release unused resources when the UI is invisible, or perform time-consuming operations in this callback,
     // for example, saving the status.
   }
 }
@@ -154,7 +155,7 @@ export default class EntryAbility extends UIAbility {
 
 The **Destroy** state is triggered when the UIAbility instance is destroyed. You can perform operations such as releasing system resources and saving data in the **onDestroy()** callback.
 
-The UIAbility instance is destroyed when **terminateSelf()** is called or the user closes the instance in **Recents**.
+The UIAbility instance is destroyed when **terminateSelf()** is called or the user closes the instance in the system application Recents.
 
 ```ts
 import UIAbility from '@ohos.app.ability.UIAbility';

en/application-dev/application-models/uiability-overview.md

-# UIAbility Component Overview
+# UIAbility Overview
 
 
 ## Overview
 
-UIAbility is a type of application component that provides the UI for user interaction.
+UIAbility is a type of application component that provides the UI for user interactions.
 
 The following design philosophy is behind UIAbility:
 
 1. Native support for [cross-device migration](hop-cross-device-migration.md) and [multi-device collaboration](hop-multi-device-collaboration.md) at the application component level
 
-2. Support for multiple device types and window forms
+2. Support for multiple device types and window modes
 
 > **NOTE**
 >
 > For details, see [Interpretation of the Application Model](application-model-description.md).
 
-The UIAbility division principles and suggestions are as follows:
+UIAbility is the basic unit of scheduling in OpenHarmony and provides a window for applications to draw the UI. An application can contain one or more UIAbility components. For example, for a payment application, you can use separate UIAbility components to carry the entry and payment functionalities.
 
-UIAbility is the basic unit scheduled by the system and provides a window for applications to draw UIs. An application can contain one or more UIAbility components. For example, for a payment application, you can use two UIAbility components to carry the entry and payment functionalities.
-
-Each UIAbility component instance is displayed as a mission in Recents.
+Each UIAbility component instance is displayed as a mission in the system application Recents.
 
 You can develop a single UIAbility or multiple UIAbilities for your application based on service requirements.
 
-- If you want only one mission to be displayed in Recents, use one UIAbility and multiple pages.
+- If you want your application to be displayed as one mission in Recents, use one UIAbility and multiple pages.
 
-- If you want multiple missions to be displayed in Recents or multiple windows to be opened simultaneously, use multiple UIAbilities.
+- If you want your application to be displayed as multiple missions in Recents or multiple windows to be opened simultaneously, use multiple UIAbilities.
 
-## Privacy Statement Configuration
+## Declaration Configuration
 
-To enable an application to properly use a UIAbility component, declare the UIAbility name, entry, and tags under [abilities](../quick-start/module-configuration-file.md#abilities) in the [module.json5 configuration file](../quick-start/module-configuration-file.md).
+To enable an application to properly use a UIAbility component, declare the UIAbility name, entry, and label under [abilities](../quick-start/module-configuration-file.md#abilities) in the [module.json5 file](../quick-start/module-configuration-file.md).
 
 
 ```json

en/application-dev/application-models/uiability-usage.md

-# UIAbility Component Usage
+# UIAbility Usage
 
 
 When using the UIAbility component, you must specify a startup page and obtain the context, [UIAbilityContext](../reference/apis/js-apis-inner-application-uiAbilityContext.md).
@@ -6,7 +6,7 @@ When using the UIAbility component, you must specify a startup page and obtain t
 
 ## Specifying the Startup Page of UIAbility
 
-If no startup page is specified, a white screen occurs after the application is started. You can use **loadContent()** of [WindowStage](../reference/apis/js-apis-window.md#windowstage9) to set the startup page in the **onWindowStageCreate()** callback of the UIAbility instance.
+You can use **loadContent()** of [WindowStage](../reference/apis/js-apis-window.md#windowstage9) to set the startup page in the **onWindowStageCreate()** callback of the UIAbility instance. If no startup page is specified, a white screen occurs after the application is started.
 
 
 ```ts
@@ -27,7 +27,7 @@ export default class EntryAbility extends UIAbility {
 
 > **NOTE**
 >
-> When you create UIAbility in DevEco Studio, the UIAbility instance loads the **Index** page by default. Therefore, you only need to replace the **Index** page path with the required startup page path.
+> When you create UIAbility in DevEco Studio, the UIAbility instance loads the **Index** page as its startup page. Therefore, you only need to replace the **Index** page path with the required startup page path.
 
 
 ## Obtaining the Context of UIAbility

en/application-dev/application-models/widget-switch.md

@@ -13,7 +13,7 @@ Widget switching involves the following parts:
 | Configuration item location      | **formAbility** and **forms** are in the **config.json** file.| **extensionAbilities** (configuration for **formExtensionAbility**) is in the **module.json5** file in the level-1 directory, and **forms** (configuration for **forms** contained in **formExtensionAbility**) is in the **form_config.json** file in the level-2 directory.|
 | Widget code path    | Specified by **srcPath**, without the file name.                        | Specified by **srcEntry**, with the file name.                                          |
 | Programming language            | **srcLanguage** can be set to **js** or **ets**.               | This configuration item is unavailable. Only ets is supported.                                       |
-| Whether to enable widgets    | formsEnabled                                | This configuration item is unavailable. The setting of **type** set to **form** means that the widgets are enabled.                              |
+| Whether to enable widgets    | formsEnabled                                | This configuration item is unavailable. When **type** is set to **form**, widgets are enabled.                              |
 | Ability type     | type: service                              | type: form                                                  |
 | Level-2 directory configuration tag| This configuration item is unavailable.                                         | **metadata**, which consists of **name**, **value**, and **resource**, where **resource** points to the location of the **form_config.json** file in the level-2 directory.|
 

en/application-dev/application-models/window-switch.md

 # window Switching
 
 
-| API in the FA Model| Corresponding d.ts File in the Stage Model| Corresponding API in the Stage Model|
+  | API in the FA Model| Corresponding .d.ts File in the Stage Model| Corresponding API in the Stage Model| 
 | -------- | -------- | -------- |
 | [create(id: string, type: WindowType, callback: AsyncCallback&lt;Window&gt;): void;](../reference/apis/js-apis-window.md#windowcreatedeprecated)<br>[create(id: string, type: WindowType): Promise&lt;Window&gt;;](../reference/apis/js-apis-window.md#windowcreatedeprecated-1) | \@ohos.window.d.ts | [createSubWindow(name: string, callback: AsyncCallback&lt;Window&gt;): void;](../reference/apis/js-apis-window.md#createsubwindow9)<br>[createSubWindow(name: string): Promise;](../reference/apis/js-apis-window.md#createsubwindow9-1)<br>An application developed on the FA model uses **window.create(id, WindowType.TYPE_APP)** to create a subwindow, whereas an application developed on the stage model uses **WindowStage.CreateSubWindow()** to create a subwindow.|
 | [getTopWindow(callback: AsyncCallback&lt;Window&gt;): void;](../reference/apis/js-apis-window.md#windowgettopwindowdeprecated)<br>[getTopWindow(): Promise&lt;Window&gt;;](../reference/apis/js-apis-window.md#windowgettopwindowdeprecated-1) | \@ohos.window.d.ts | [getLastWindow(ctx: BaseContext, callback: AsyncCallback&lt;Window&gt;): void;](../reference/apis/js-apis-window.md#windowgetlastwindow9)<br>[getLastWindow(ctx: BaseContext): Promise&lt;Window&gt;;](../reference/apis/js-apis-window.md#windowgetlastwindow9-1) |
-

en/application-dev/application-models/windowextensionability.md

@@ -11,7 +11,7 @@ the context is [WindowExtensionContext](../reference/apis/js-apis-inner-applicat
 
 > **NOTE**
 >
-> **WindowExtensionAbility** is a system API. To embed a third-party application in another application and display it over the application, switch to the full SDK by following the instructions provided in [Guide to Switching to Full SDK](../faqs/full-sdk-switch-guide.md).
+> **WindowExtensionAbility** is a system API. To use it, switch to the full SDK by following the instructions provided in [Guide to Switching to Full SDK](../faqs/full-sdk-switch-guide.md).
 >
 
 
@@ -19,11 +19,11 @@ the context is [WindowExtensionContext](../reference/apis/js-apis-inner-applicat
 
 The **WindowExtensionAbility** class provides **onConnect()**, **onDisconnect()**, and **onWindowReady()** lifecycle callbacks, which can be overridden.
 
-- The **onWindowReady()** callback is invoked when a window is created for the ability.
+- The **onWindowReady()** callback is invoked when a window is created for the UIAbility.
 
-- The **onConnect()** callback is invoked when the AbilityComponent corresponding to the window connects to the ability.
+- The **onConnect()** callback is invoked when the AbilityComponent corresponding to the window connects to the UIAbility.
 
-- The **onDisconnect()** callback is invoked when the AbilityComponent disconnects from the ability.
+- The **onDisconnect()** callback is invoked when the AbilityComponent disconnects from the UIAbility.
 
 
 **How to Develop**