!18807 翻译已完成18120+18312+18362+18349+18317

Merge pull request !18807 from shawn_he/18120-d

en/application-dev/reference/apis/js-apis-pointer.md

@@ -258,6 +258,386 @@ try {
 }
 ```
 
+## pointer.setHoverScrollState<sup>10+</sup>
+
+setHoverScrollState(state: boolean, callback: AsyncCallback&lt;void&gt;): void
+
+Sets the status of the mouse hover scroll switch. This API uses an asynchronous callback to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name      | Type                       | Mandatory  | Description                                   |
+| -------- | ------------------------- | ---- | ------------------------------------- |
+| state    | boolean                    | Yes   | Status of the mouse hover scroll switch.  |
+| callback | AsyncCallback&lt;void&gt; | Yes   | Callback used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.setHoverScrollState(true, (error) => {
+    if (error) {
+      console.log(`Set the mouse hover scroll failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+      return;
+    }
+    console.log(`Set the mouse hover scroll success`);
+  });
+} catch (error) {
+  console.log(`Set the mouse hover scroll failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.setHoverScrollState<sup>10+</sup>
+
+setHoverScrollState(state: boolean): Promise&lt;void&gt;
+
+Sets the status of the mouse hover scroll switch. This API uses a promise to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name   | Type    | Mandatory  | Description                                 |
+| ----- | ------ | ---- | ----------------------------------- |
+| state | boolean | Yes   | Status of the mouse hover scroll switch.|
+
+**Return value**
+
+| Name                 | Description              |
+| ------------------- | ---------------- |
+| Promise&lt;void&gt; | Promise used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.setHoverScrollState(true).then(() => {
+    console.log(`Set the mouse hover scroll success`);
+  });
+} catch (error) {
+  console.log(`Set the mouse hover scroll failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.getHoverScrollState<sup>10+</sup>
+
+getHoverScrollState(callback: AsyncCallback&lt;boolean&gt;): void
+
+Obtains the status of the mouse hover scroll switch. This API uses an asynchronous callback to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name      | Type                         | Mandatory  | Description            |
+| -------- | --------------------------- | ---- | -------------- |
+| callback | AsyncCallback&lt;boolean&gt; | Yes   | Callback used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.getHoverScrollState((error, state) => {
+    console.log(`Get the mouse hover scroll success, state: ${JSON.stringify(state)}`);
+  });
+} catch (error) {
+  console.log(`Get the mouse hover scroll failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.getHoverScrollState<sup>10+</sup>
+
+getHoverScrollState(): Promise&lt;boolean&gt;
+
+Obtains the status of the mouse hover scroll switch. This API uses a promise to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Return value**
+
+| Name                   | Description                 |
+| --------------------- | ------------------- |
+| Promise&lt;boolean&gt; | Promise used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.getHoverScrollState().then((state) => {
+    console.log(`Get the mouse hover scroll success, state: ${JSON.stringify(state)}`);
+  });
+} catch (error) {
+  console.log(`Get the mouse hover scroll failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.setMousePrimaryButton<sup>10+</sup>
+
+setMousePrimaryButton(primary: PrimaryButton, callback: AsyncCallback&lt;void&gt;): void
+
+Sets the primary button of the mouse. This API uses an asynchronous callback to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name   | Type                     | Mandatory | Description                                   |
+| -------- | ------------------------- | ----  | ------------------------------------- |
+| primary  | [PrimaryButton](#primarybutton10)   | Yes   | ID of the primary mouse button.  |
+| callback | AsyncCallback&lt;void&gt; | Yes   | Callback used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.setMousePrimaryButton(pointer.PrimaryButton.RIGHT, (error) => {
+    if (error) {
+      console.log(`Set mouse primary button failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+      return;
+    }
+    console.log(`Set mouse primary button success`);
+  });
+} catch (error) {
+  console.log(`Set mouse primary button failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.setMousePrimaryButton<sup>10+</sup>
+
+setMousePrimaryButton(primary: PrimaryButton): Promise&lt;void&gt;
+
+Sets the primary button of the mouse. This API uses a promise to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name   | Type    | Mandatory  | Description                                 |
+| ----- | ------ | ---- | ----------------------------------- |
+| primary | [PrimaryButton](#primarybutton10) | Yes   | ID of the primary mouse button.|
+
+**Return value**
+
+| Name                 | Description              |
+| ------------------- | ---------------- |
+| Promise&lt;void&gt; | Promise used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.setMousePrimaryButton(pointer.PrimaryButton.RIGHT).then(() => {
+    console.log(`Set mouse primary button success`);
+  });
+} catch (error) {
+  console.log(`Set mouse primary button failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.getMousePrimaryButton<sup>10+</sup>
+
+getMousePrimaryButton(callback: AsyncCallback&lt;PrimaryButton&gt;): void
+
+Obtains the primary button of the mouse. This API uses an asynchronous callback to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name      | Type                         | Mandatory  | Description            |
+| -------- | --------------------------- | ---- | -------------- |
+| callback | AsyncCallback&lt;[PrimaryButton](#primarybutton10)&gt; | Yes   | Callback used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.getMousePrimaryButton((error, primary) => {
+    console.log(`Get mouse primary button success, primary: ${JSON.stringify(primary)}`);
+  });
+} catch (error) {
+  console.log(`Get mouse primary button failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.getMousePrimaryButton<sup>10+</sup>
+
+getMousePrimaryButton(): Promise&lt;PrimaryButton&gt;
+
+Obtains the primary button of the mouse. This API uses a promise to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Return value**
+
+| Name                   | Description                 |
+| --------------------- | ------------------- |
+| Promise&lt;[PrimaryButton](#primarybutton10)&gt; | Promise used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.getMousePrimaryButton().then((primary) => {
+    console.log(`Get mouse primary button success, primary: ${JSON.stringify(primary)}`);
+  });
+} catch (error) {
+  console.log(`Get mouse primary button failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## PrimaryButton<sup>10+</sup>
+
+Type of the primary mouse button.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+| Name                              | Value   | Description    |
+| -------------------------------- | ---- | ------ |
+| LEFT                          | 0    | Left mouse button.    |
+| RIGHT                             | 1    | Right mouse button.  |
+
+## pointer.setMouseScrollRows<sup>10+</sup>
+
+setMouseScrollRows(rows: number, callback: AsyncCallback&lt;void&gt;): void
+
+Sets the number of mouse scroll rows. This API uses an asynchronous callback to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name      | Type                       | Mandatory  | Description                                   |
+| -------- | ------------------------- | ---- | ------------------------------------- |
+| rows     | number                    | Yes   | Number of mouse scroll rows. The value ranges from 1 to 100. The default value is **3**.  |
+| callback | AsyncCallback&lt;void&gt; | Yes   | Callback used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.setMouseScrollRows(1, (error) => {
+    if (error) {
+      console.log(`setMouseScrollRows failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+      return;
+    }
+    console.log(`setMouseScrollRows success`);
+  });
+} catch (error) {
+  console.log(`setMouseScrollRows failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.setMouseScrollRows<sup>10+</sup>
+
+setMouseScrollRows(rows: number): Promise&lt;void&gt;
+
+Sets the number of mouse scroll rows. This API uses a promise to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name   | Type    | Mandatory  | Description                                 |
+| ----- | ------ | ---- | ----------------------------------- |
+| rows  | number | Yes   | Number of mouse scroll rows. The value ranges from 1 to 100. The default value is **3**.|
+
+**Return value**
+
+| Name                 | Description              |
+| ------------------- | ---------------- |
+| Promise&lt;void&gt; | Promise used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.setMouseScrollRows(20).then(() => {
+    console.log(`setMouseScrollRows success`);
+  });
+} catch (error) {
+  console.log(`setMouseScrollRows failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.getMouseScrollRows<sup>10+</sup>
+
+getMouseScrollRows(callback: AsyncCallback&lt;number&gt;): void
+
+Obtains the number of mouse scroll rows. This API uses an asynchronous callback to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Parameters**
+
+| Name      | Type                         | Mandatory  | Description            |
+| -------- | --------------------------- | ---- | -------------- |
+| callback | AsyncCallback&lt;number&gt; | Yes   | Callback used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.getMouseScrollRows((error, rows) => {
+    console.log(`getMouseScrollRows success, rows: ${JSON.stringify(rows)}`);
+  });
+} catch (error) {
+  console.log(`getMouseScrollRows failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
+## pointer.getMouseScrollRows<sup>10+</sup>
+
+getMouseScrollRows(): Promise&lt;number&gt;
+
+Obtains the mouse movement speed. This API uses a promise to return the result.
+
+**System capability**: SystemCapability.MultimodalInput.Input.Pointer
+
+**System API**: This is a system API.
+
+**Return value**
+
+| Name                   | Description                 |
+| --------------------- | ------------------- |
+| Promise&lt;number&gt; | Promise used to return the result.|
+
+**Example**
+
+```js
+try {
+  pointer.getMouseScrollRows().then((rows) => {
+    console.log(`getMouseScrollRows success, rows: ${JSON.stringify(rows)}`);
+  });
+} catch (error) {
+  console.log(`getMouseScrollRows failed, error: ${JSON.stringify(error, [`code`, `message`])}`);
+}
+```
+
 ## pointer.getPointerStyle<sup>9+</sup>
 
 getPointerStyle(windowId: number, callback: AsyncCallback&lt;PointerStyle&gt;): void

en/device-dev/subsystems/Readme-EN.md

@@ -126,4 +126,6 @@
         - [Thermal Policy Customization](subsys-thermal_policy.md)
         - [Thermal Scene Customization](subsys-thermal_scene.md)
     - Power Management
-        - [Power Mode Customization](subsys-power-mode-customization.md)
\ No newline at end of file
+        - [Power Mode Customization](subsys-power-mode-customization.md)
+        - [Default Hibernation Behavior Customization](subsys-power-default-sleep-behavior-customization.md)
+        - [Wakeup Source Customization](subsys-power-wakeup-source-customization.md)
\ No newline at end of file

en/device-dev/subsystems/subsys-dfx-hisysevent-query.md

@@ -81,10 +81,6 @@ The **condition** parameter must be in the specified JSON string format. For exa
         "and":[
             {"param":"type_","op":">","value":0},
             {"param":"uid_","op":"=","value":1201}
-        ],
-        "or":[
-            {"param":"NAME","op":"=","value":"SysEventService"},
-            {"param":"NAME","op":"=","value":"SysEventSource"}
         ]
     }
 }
@@ -93,7 +89,6 @@ The **condition** parameter must be in the specified JSON string format. For exa
 - The **version** field is mandatory, indicating the supported version of the input condition. Currently, only **V1** is supported.
 - The **condition** field is mandatory, indicating the input condition.
   - The **and** field is optional, indicating the AND relationship between conditions.
-  - The **or** field is optional, indicating the OR relationship between conditions.
     - The **param** field is mandatory, indicating the parameter name for condition matching. The value must be a string.
     - The **op** field is mandatory, indicating the parameter comparison operator for condition matching. The value must be a string. Supported comparison operators include the following: =, >, <, >=, and <=.
     - The **value** field is mandatory, indicating the parameter value for condition matching. The value must be a string or an integer.

en/device-dev/subsystems/subsys-power-default-sleep-behavior-customization.md

+# Default Hibernation Behavior Customization
+
+## Overview
+
+### Introduction
+
+By default, after a device screen is turned off, OpenHarmony starts the running lock loop detection thread and then enters the hibernation state. For different devices, the mode of turning off the screen is different, which can be closing the lid, setting a timeout, or pressing the power button. Besides, the default hibernation behavior is also different, which can be performing no action, powering off the screen, or entering the hibernation state. To address this issue, OpenHarmony provides the default hibernation behavior customization function, allowing you to customize the default hibernation behavior depending on your hardware specifications.
+
+### Constraints
+
+The configuration paths for battery level customization are subject to the configuration policy.
+The configuration path for battery level customization is subject to the [configuration policy](https://gitee.com/openharmony/customization_config_policy). In this development guide, `/vendor` is used as an example of the configuration path. During actual development, you need to modify the customization path based on the product configuration policy.
+
+## How to Develop
+
+### Setting Up the Environment
+
+**Hardware requirements:**
+
+Development board running the standard system, for example, the DAYU200 or Hi3516D V300 open source suite.
+
+**Environment requirements:**
+
+For details about the requirements on the Linux environment, see [Quick Start](../quick-start/quickstart-overview.md).
+
+### Getting Started with Development
+
+The following uses [DAYU200](https://gitee.com/openharmony/vendor_hihope/tree/master/rk3568) as an example to illustrate default hibernation behavior customization.
+
+1. Create the `power_manager` folder in the product directory [/vendor/hihope/rk3568](https://gitee.com/openharmony/vendor_hihope/tree/master/rk3568).
+
+2. Create a target folder by referring to the [default folder of hibernation behavior configuration](https://gitee.com/openharmony/powermgr_power_manager/tree/master/services/native/profile), and install it in `/vendor/hihope/rk3568/power_manager`. The content is as follows:
+
+    ```text
+    profile
+    ├── BUILD.gn
+    ├── power_suspend.json
+    ```
+
+3. Write the custom `power_suspend.json` file that contains the custom default hibernation behavior. The following is an example of hibernation behavior configuration:
+
+    ```json
+    {
+        "powerkey": {
+            "action": 1,
+            "delayMs": 0
+        },
+        "timeout": {
+            "action": 1,
+            "delayMs": 0
+        },
+        "lid": {
+            "action": 1,
+            "delayMs": 0
+        },
+        "switch": {
+            "action": 1,
+            "delayMs": 0
+        }
+    }
+    ```
+
+    **Table 1** Description of hibernation sources
+
+    | Hibernation Source| Description|
+    | -------- | -------- |
+    | powerkey | Hibernation by power button|
+    | timeout | Hibernation by timeout|
+    | lid | Hibernation by lid|
+    | switch | Hibernation by switch|
+
+    **Table 2** Description of the hibernation source configuration
+
+    | Item| Description|
+    | -------- | -------- |
+    | action | Action to take after the screen is turned off. Set this parameter to an enumerated value. For details, see Table 3.|
+    | delayMs | Delay, in ms.|
+
+    **Table 3** Description of action
+
+    | action | Value| Description|
+    | -------- | -------- | -------- |
+    | ACTION_NONE | 0 | No action.|
+    | ACTION_AUTO_SUSPEND | 1 | Automatically entering the sleep mode.|
+    | ACTION_FORCE_SUSPEND | 2 | Forcibly entering the sleep mode.|
+    | ACTION_HIBERNATE | 3 | Entering the hibernation state.|
+    | ACTION_SHUTDOWN | 4 | Shutting down the system.|
+
+4. Write the `BUILD.gn` file by referring to the [BUILD.gn](https://gitee.com/openharmony/powermgr_power_manager/blob/master/services/native/profile/BUILD.gn) file in the default folder of hibernation behavior configuration to pack the `power_suspend.json` file to the `/vendor/etc/power_config` directory. The configuration is as follows:
+
+    ```shell
+    import("//build/ohos.gni")               # Reference build/ohos.gni.
+
+    ohos_prebuilt_etc("suspend_config") {
+        source = "power_suspend.json"
+        relative_install_dir = "power_config"
+        install_images = [ chipset_base_dir ] # Required configuration for installing the battery_config.json file in the vendor directory.
+        part_name = "product_rk3568"          # Set part_name to product_rk3568 for subsequent build.
+    }
+    ```
+
+5. Add the build target to `module_list` in [ohos.build](https://gitee.com/openharmony/vendor_hihope/blob/master/rk3568/ohos.build) in the `/vendor/hihope/rk3568` directory. For example:
+
+    ```json
+    {
+        "parts": {
+            "product_rk3568": {
+                "module_list": [
+                    "//vendor/hihope/rk3568/default_app_config:default_app_config",
+                    "//vendor/hihope/rk3568/image_conf:custom_image_conf",
+                    "//vendor/hihope/rk3568/preinstall-config:preinstall-config",
+                    "//vendor/hihope/rk3568/resourceschedule:resourceschedule",
+                    "//vendor/hihope/rk3568/etc:product_etc_conf",
+                    "//vendor/hihope/rk3568/power_manager/profile:wakeup_config" // Add the configuration for building of suspend_config.
+                ]
+            }
+        },
+        "subsystem": "product_hihope"
+    }
+    ```
+    In the preceding code, `//vendor/hihope/rk3568/power_manager/` is the folder path, `profile` is the folder name, and `suspend_config` is the build target.
+
+6. Build the customized version by referring to [Quick Start](../quick-start/quickstart-overview.md).
+
+    ```shell
+    ./build.sh --product-name rk3568 --ccache
+    ```
+
+7. Burn the customized version to the DAYU200 development board.
+
+### Debugging and Verification
+
+1. Customize hibernation sources in the `power_suspend.json` file.
+    ```json
+    {
+        "powerkey": {
+            "action": 4,
+            "delayMs": 0
+        },
+        "timeout": {
+            "action": 1,
+            "delayMs": 0
+        },
+        "lid": {
+            "action": 1,
+            "delayMs": 0
+        },
+        "switch": {
+            "action": 1,
+            "delayMs": 0
+        }
+    }
+    ```
+
+2. Power on the device, and then press the power button.
+
+    The device is powered off.
+
+3. Power on the device again, and then wait for a while.
+
+    The device screen is turned off.

en/device-dev/subsystems/subsys-power-stats-power-average-customization.md

@@ -4,7 +4,7 @@
 
 ### Introduction
 
-By default, OpenHarmony provides the power consumption statistics feature. However, the power consumption benchmarks vary according to hardware specifications of different products.  To address this issue, OpenHarmony provides the power consumption statistics customization function, allowing you to customize power consumption benchmarks depending on your hardware specifications.
+By default, OpenHarmony provides the power consumption statistics feature. However, the power consumption benchmarks vary according to hardware specifications of different products. To address this issue, OpenHarmony provides the power consumption statistics customization function, allowing you to customize power consumption benchmarks depending on your hardware specifications.
 
 ### Basic Concepts
 

en/device-dev/subsystems/subsys-power-wakeup-source-customization.md

+# Wakeup Source Customization
+
+## Overview
+
+### Introduction
+
+OpenHarmony supports multiple wakeup sources, such as the power button, keyboard, and mouse, and provides custom modes for turning on and off these wakeup sources. After a device enters the sleep state, you can turn on the screen and wake up the device by pressing the power button, keyboard, or mouse. However, different products may support different peripherals, for example, stylus or folio keyboard. To address this issue, OpenHarmony provides the wakeup source customization function, allowing you to customize wakeup sources depending on your hardware specifications.
+
+### Constraints
+
+The configuration paths for battery level customization are subject to the configuration policy.
+The configuration path for battery level customization is subject to the [configuration policy](https://gitee.com/openharmony/customization_config_policy). In this development guide, `/vendor` is used as an example of the configuration path. During actual development, you need to modify the customization path based on the product configuration policy.
+
+## How to Develop
+
+### Setting Up the Environment
+
+**Hardware requirements:**
+
+Development board running the standard system, for example, the DAYU200 or Hi3516D V300 open source suite.
+
+**Environment requirements:**
+
+For details about the requirements on the Linux environment, see [Quick Start](../quick-start/quickstart-overview.md).
+
+### Getting Started with Development
+
+The following uses [DAYU200](https://gitee.com/openharmony/vendor_hihope/tree/master/rk3568) as an example to illustrate wakeup source customization.
+
+1. Create the `power_manager` folder in the product directory [/vendor/hihope/rk3568](https://gitee.com/openharmony/vendor_hihope/tree/master/rk3568).
+
+2. Create a target folder by referring to the [default folder of wakeup source configuration](https://gitee.com/openharmony/powermgr_power_manager/tree/master/services/native/profile), and install it in `/vendor/hihope/rk3568/power_manager`. The content is as follows:
+
+    ```text
+    profile
+    ├── BUILD.gn
+    ├── power_wakeup.json
+    ```
+
+3. Write the custom `power_wakeup.json` file that contains the custom wakeup sources. The following is an example of wakeup source configuration:
+
+    ```json
+    {
+        "powerkey": {
+            "enable": true
+        },
+        "keyborad": {
+            "enable": true
+        },
+        "mouse": {
+            "enable": true
+        },
+        "touchscreen": {
+            "enable": true,
+            "click": 2
+        },
+        "touchpad": {
+            "enable": true
+        },
+        "pen": {
+            "enable": true
+        },
+        "lid": {
+            "enable": true
+        },
+        "switch": {
+            "enable": true
+        }
+    }
+    ```
+
+    **Table 1** Description of wakeup sources
+
+    | Wakeup Source| Description|
+    | -------- | -------- |
+    | powerkey | Wakeup by power button|
+    | keyborad | Wakeup by keyboard|
+    | mouse | Wakeup by mouse|
+    | touchscreen | Wakeup by touchscreen|
+    | touchpad | Wakeup by touchpad|
+    | pen | Wakeup by stylus|
+    | lid | Wakeup by lid|
+    | switch | Wakeup by switch|
+
+    **Table 2** Description of the wakeup source configuration
+
+    | Item| Type| Description|
+    | -------- | -------- | -------- |
+    | enable | bool | Whether to enable wakeup listening|
+    | click | int | Number of clicks|
+
+
+4. Write the `BUILD.gn` file by referring to the [BUILD.gn](https://gitee.com/openharmony/powermgr_power_manager/blob/master/services/native/profile/BUILD.gn) file in the default folder of wakeup source configuration to pack the `power_wakeup.json` file to the `/vendor/etc/power_config` directory. The configuration is as follows:
+
+    ```shell
+    import("//build/ohos.gni")               # Reference build/ohos.gni.
+
+    ohos_prebuilt_etc("wakeup_config") {
+        source = "power_wakeup.json"
+        relative_install_dir = "power_config"
+        install_images = [ chipset_base_dir ] # Required configuration for installing the battery_config.json file in the vendor directory.
+        part_name = "product_rk3568"          # Set part_name to product_rk3568 for subsequent build.
+    }
+    ```
+
+5. Add the build target to `module_list` in [ohos.build](https://gitee.com/openharmony/vendor_hihope/blob/master/rk3568/ohos.build) in the `/vendor/hihope/rk3568` directory. For example:
+
+    ```json
+    {
+        "parts": {
+            "product_rk3568": {
+                "module_list": [
+                    "//vendor/hihope/rk3568/default_app_config:default_app_config",
+                    "//vendor/hihope/rk3568/image_conf:custom_image_conf",
+                    "//vendor/hihope/rk3568/preinstall-config:preinstall-config",
+                    "//vendor/hihope/rk3568/resourceschedule:resourceschedule",
+                    "//vendor/hihope/rk3568/etc:product_etc_conf",
+                    "//vendor/hihope/rk3568/power_manager/profile:wakeup_config" // Add the configuration for building of wakeup_config.
+                ]
+            }
+        },
+        "subsystem": "product_hihope"
+    }
+    ```
+    In the preceding code, `//vendor/hihope/rk3568/power_manager/` is the folder path, `profile` is the folder name, and `wakeup_config` is the build target.
+
+6. Build the customized version by referring to [Quick Start](../quick-start/quickstart-overview.md).
+
+    ```shell
+    ./build.sh --product-name rk3568 --ccache
+    ```
+
+7. Burn the customized version to the DAYU200 development board.
+
+### Debugging and Verification
+
+1. Customize wakeup sources in the `power_wakeup.json` file.
+    ```json
+    {
+        "powerkey": {
+            "enable": true
+        },
+        "keyborad": {
+            "enable": true
+        },
+        "mouse": {
+            "enable": true
+        },
+        "touchscreen": {
+            "enable": false,
+            "click": 2
+        },
+        "touchpad": {
+            "enable": false
+        },
+        "pen": {
+            "enable": false
+        },
+        "lid": {
+            "enable": false
+        },
+        "switch": {
+            "enable": false
+        }
+    }
+    ```
+
+2. After the device is powered on, press the power button to switch the device to the sleep mode. Then, press the power button again.
+
+    The device screen is turned on and the device is woken up.
+
+3. Press the power button to switch the device to the sleep mode, and then press the keyboard.
+
+    The device screen is turned on and the device is woken up.
+
+4. Press the power button to switch the device to the sleep mode, and then move the mouse.
+
+    The device screen is turned on and the device is woken up.