!3175 #I4ZU2U完成，请审批

Merge pull request !3175 from Annie_wang/PR2603

en/device-dev/driver/driver-peripherals-lcd-des.md

@@ -159,9 +159,9 @@ The following example shows code for developing an LCD driver:
 #define HORIZONTAL_BACK_PORCH     20
 #define HORIZONTAL_FRONT_PORCH    20
 #define HORIZONTAL_SYNC_WIDTH     10
-#define VERTIACL_BACK_PORCH       14
-#define VERTIACL_FRONT_PORCH      16
-#define VERTIACL_SYNC_WIDTH       2
+#define VERTICAL_BACK_PORCH       14
+#define VERTICAL_FRONT_PORCH      16
+#define VERTICAL_SYNC_WIDTH       2
 #define FRAME_RATE                60
 
 /* PanelInfo structure */
@@ -300,9 +300,9 @@ static struct PanelInfo g_panelInfo = {
     .hbp = HORIZONTAL_BACK_PORCH,       /* horizontal back porch */
     .hfp = HORIZONTAL_FRONT_PORCH,      /* horizontal front porch */
     .hsw = HORIZONTAL_SYNC_WIDTH,       /* horizontal sync width */
-    .vbp = VERTIACL_BACK_PORCH,         /* vertiacl back porch */
-    .vfp = VERTIACL_FRONT_PORCH,        /* vertiacl front porch */
-    .vsw = VERTIACL_SYNC_WIDTH,         /* vertiacl sync width */
+    .vbp = VERTICAL_BACK_PORCH,         /* vertical back porch */
+    .vfp = VERTICAL_FRONT_PORCH,        /* vertical front porch */
+    .vsw = VERTICAL_SYNC_WIDTH,         /* vertical sync width */
     .frameRate = FRAME_RATE,            /* frame rate */
     .intfType = MIPI_DSI,               /* panel interface type */
     .intfSync = OUTPUT_USER,            /* output timming type */

en/device-dev/driver/driver-platform-i3c-develop.md

@@ -164,9 +164,9 @@ The I3C module adaptation involves the following steps:
     
         ```c
         struct VirtualI3cCntlr {
-            struct AdcDevice device;// (Mandatory) Control object at the core layer. For details, see the following description of I3cCntlr.
+            struct I3cCntlr cntlr;   // (Mandatory) Control object at the core layer. For details, see the following description of I3cCntlr.
             volatile unsigned char *regBase;// (Mandatory) Register base address.
-            uint32_t regBasePhy; // (Mandatory) Physical base address of the register.
+            uint32_t regBasePhy;     // (Mandatory) Physical base address of the register.
             uint32_t regSize;        // (Mandatory) Bit width of the register.
             uint16_t busId;          // (Mandatory) Device number.
             uint16_t busMode;