!3968 Modify the name of a product specified for compile

Merge pull request !3968 from frank_bing/20220507

en/device-dev/kernel/kernel-standard-build.md

@@ -9,8 +9,8 @@ The following uses the Hi3516D V300 board and Ubuntu x86 server as an example.
 Perform a full build for the project to generate the  **uImage**  kernel image.
 
 ```
-./build.sh --product-name Hi3516DV300              # Build the Hi3516D V300 image.
-        --build-target build_kernel                    # Build the uImage kernel image of the Hi3516D V300 board.
+./build.sh --product-name hispark_taurus_standard              # Build the hispark_taurus_standard image.
+        --build-target build_kernel                    # Build the uImage kernel image of the hispark_taurus_standard.
     --gn-args linux_kernel_version=\"linux-5.10\" # Build the specified kernel version.
 ```
 

en/device-dev/porting/porting-linux-kernel.md

@@ -211,7 +211,7 @@ The procedure is as follows:
     Run the following command:
 
     ```
-    ./build.sh --product-name Hi3516DV300 --build-target hdf_test
+    ./build.sh --product-name hispark_taurus_standard --build-target hdf_test
     ```
 
     Wait until the build is complete.

en/device-dev/quick-start/quickstart-standard-running-hi3516-build.md

@@ -45,4 +45,4 @@ Go to the root directory of the source code in the Ubuntu environment and perfor
 5. Check the build result. If "build success" is displayed, the building is successful.
 
    > ![icon-notice.gif](public_sys-resources/icon-notice.gif) **NOTICE**
-   > The build result and log files are stored in **out/hi3516dv300**.
+   > The build result and log files are stored in **out/hispark_taurus**.

en/device-dev/subsystems/subsys-build-standard-large.md

@@ -213,14 +213,14 @@ The process to build OpenHarmony is as follows:
 
 3.  Build the module.
 
-    For example, run the following command to build Hi3516D V300:
+    For example, run the following command to build hispark_taurus_standard:
 
     ```
-    ./build.sh --product-name Hi3516DV300 --ccache
+    ./build.sh --product-name hispark_taurus_standard --ccache
     ```
 
 4.  Obtain the build result.
 
-    Files generated during the build process are stored in the  **out/hi3516dv300/**  directory, and the generated image is stored in the  **out/hi3516dv300/packages/phone/images/**  directory.
+    Files generated during the build process are stored in the  **out/hispark_taurus/**  directory, and the generated image is stored in the  **out/hispark_taurus/packages/phone/images/**  directory.
 
 

en/device-dev/subsystems/subsys-testguide-test.md

@@ -718,13 +718,13 @@ Before executing test cases, you need to modify the configuration based on the d
 
 Test cases cannot be built on Windows. You need to run the following command to build test cases on Linux:
 ```
-./build.sh --product-name Hi3516DV300 --build-target make_test
+./build.sh --product-name hispark_taurus_standard --build-target make_test
 ```
 >Note:
->- **product-name**: specifies the name of the product to build, for example, **Hi3516DV300**.
+>- **product-name**: specifies the name of the product to build, for example, **hispark_taurus_standard**.
 >- **build-target**: specifies the test case to build. **make_test** indicates all test cases. You can specify the test cases based on requirements.
 
-After the build is complete, the test cases are automatically saved in **out/hi3516dv300/packages/phone/tests**.
+After the build is complete, the test cases are automatically saved in **out/hispark_taurus/packages/phone/tests**.
 
 #### Setting Up the Execution Environment
 1. On Windows, create the **Test** directory in the test framework and then create the **testcase** directory in the **Test** directory.

en/readme/kernel.md

@@ -182,13 +182,13 @@ For details, see "Usage" in LiteOS-A Kernel [README](https://gitee.com/openharmo
 
 ## Build<a name="section19369206113115"></a>
 
-The following uses the Hi3516D V300 development board and Ubuntu x86 server as an example.
+The following uses the hispark_taurus development board and Ubuntu x86 server as an example.
 
 Perform a full build for the project to generate the **uImage** kernel image.
 
 ```
-./build.sh --product-name Hi3516DV300              # Build the Hi3516D V300 image.
-    --build-target build_kernel                    # Build the uImage kernel image of Hi3516D V300.
+./build.sh --product-name hispark_taurus_standard              # Build the hispark_taurus_standard image.
+    --build-target build_kernel                    # Build the uImage kernel image of hispark_taurus_standard.
     --gn-args linux_kernel_version=\"linux-5.10\"  # Build the specified kernel version.
 ```
 

en/readme/test.md

@@ -663,11 +663,11 @@ Before executing test cases, you need to modify the configuration based on the d
 
 Test cases cannot be built on Windows. You need to run the following command to build test cases on Linux:
 ```
-./build.sh --product-name Hi3516DV300 --build-target make_test
+./build.sh --product-name hispark_taurus_standard --build-target make_test
 ```
-When the build is complete, the test cases are automatically saved in **out/hi3516dv300/packages/phone/images/tests**.
+When the build is complete, the test cases are automatically saved in **out/hispark_taurus/packages/phone/images/tests**.
 
->**NOTE:** In the command, **Hi3516DV300** is the platform supported by the current version, and **make_test** indicates all test cases. You can set the build options based on requirements:
+>**NOTE:** In the command, **hispark_taurus_standard** is the product supported by the current version, and **make_test** indicates all test cases. You can set the build options based on requirements:
 > -  --**product-name**: specifies the name of the product to build. It is mandatory.
 > - --**build-target**: specifies the target to build. It is optional. 
 

zh-cn/device-dev/kernel/kernel-standard-build.md

 # Linux内核编译与构建指导
 
-- [开发示例1](#开发示例1)
+- [Linux内核编译与构建指导](#linux内核编译与构建指导)
+  - [开发示例1](#开发示例1)
 
 ## 开发示例1
 
@@ -11,7 +12,7 @@
 
 
 ```
-./build.sh --product-name Hi3516DV300              # 编译hi3516dv300镜像
-    --build-target build_kernel                    # 编译hi3516dv300的uImage内核镜像
+./build.sh --product-name hispark_taurus_standard              # 编译hispark_taurus_standard镜像
+    --build-target build_kernel                    # 编译hispark_taurus_standard的uImage内核镜像
     --gn-args linux_kernel_version=\"linux-5.10\"  # 编译指定内核版本
 ```

zh-cn/device-dev/porting/porting-linux-kernel.md

@@ -230,7 +230,7 @@ HDF（Hardware Driver Foundation)自测试用例，用于测试HDF框架和外
 
      
    ```
-   ./build.sh --product-name Hi3516DV300 --build-target hdf_test
+   ./build.sh --product-name hispark_taurus_standard --build-target hdf_test
    ```
 
    等待编译完成。

zh-cn/device-dev/quick-start/quickstart-standard-running-hi3516-build.md

@@ -45,4 +45,4 @@ OpenHarmony支持hb和build.sh两种编译方式。此处介绍hb方式，build.
 5. 编译结束后，出现“build success”字样，说明构建成功。
 
    > ![icon-notice.gif](public_sys-resources/icon-notice.gif) **须知：**
-   > 编译结果文件及编译日志文件获取路径：out/hi3516dv300。
+   > 编译结果文件及编译日志文件获取路径：out/hispark_taurus。

zh-cn/device-dev/subsystems/subsys-build-standard-large.md

@@ -216,14 +216,14 @@ OpenHarmony侧的编译构建流程主要包括编译命令行解析，调用gn
    在产品配置文件中添加 "subsystem_examples:partA"，表示该产品中会编译并打包partA到版本中。
 
 3. 编译。
-     以编译Hi3516DV300为例，编译命令如下：
+     以编译hispark_taurus_standard为例，编译命令如下：
      
    ```
-   ./build.sh --product-name Hi3516DV300 --ccache
+   ./build.sh --product-name hispark_taurus_standard --ccache
    ```
 
 4. 编译输出。
-   编译所生成的文件都归档在out/hi3516dv300/目录下，结果镜像输出在 out/hi3516dv300/packages/phone/images/ 目录下。
+   编译所生成的文件都归档在out/hispark_taurus/目录下，结果镜像输出在 out/hispark_taurus/packages/phone/images/ 目录下。
 
 
 ## 常见问题

zh-cn/device-dev/subsystems/subsys-testguide-test.md

@@ -718,13 +718,13 @@ subsystem  # 子系统
 
 由于Windows环境下无法实现用例编译，因此执行用例前需要在Linux环境下进行用例编译，用例编译命令：
 ```
-./build.sh --product-name Hi3516DV300 --build-target make_test
+./build.sh --product-name hispark_taurus_standard --build-target make_test
 ```
 >说明:
->- product-name：指定编译产品名称，例如Hi3516DV300。
+>- product-name：指定编译产品名称，例如hispark_taurus_standard。
 >- build-target：指定所需要编译的用例，make_test表示指定全部用例，实际开发中可指定特定用例。
 
-编译完成后，测试用例将自动保存在out/hi3516dv300/packages/phone/tests目录下。
+编译完成后，测试用例将自动保存在out/hispark_taurus/packages/phone/tests目录下。
 
 #### 搭建执行环境
 1. 在Windows环境创建测试框架目录Test，并在此目录下创建testcase目录

zh-cn/readme/内核子系统.md

@@ -198,7 +198,7 @@ Hi3518EV300默认使用jffs2文件系统，Hi3516DV300默认使用FAT文件系
 使用工程的全量编译命令，编译生成uImage内核镜像
 
 ```
-./build.sh --product-name Hi3516DV300              # 编译hi3516dv300镜像
+./build.sh --product-name hispark_taurus_standard              # 编译hi3516dv300镜像
     --build-target build_kernel                    # 编译hi3516dv300的uImage内核镜像
     --gn-args linux_kernel_version=\"linux-5.10\"  # 编译指定内核版本
 ```

zh-cn/readme/测试子系统.md

@@ -661,11 +661,11 @@ subsystem  # 子系统
 
 由于Windows环境下无法实现用例编译，因此执行用例前需要在Linux环境下进行用例编译，用例编译命令：
 ```
-./build.sh --product-name Hi3516DV300 --build-target make_test
+./build.sh --product-name hispark_taurus_standard --build-target make_test
 ```
-编译完成后，测试用例将自动保存在out/hi3516dv300/packages/phone/images/tests目录下。
+编译完成后，测试用例将自动保存在out/hispark_taurus/packages/phone/images/tests目录下。
 
->说明: Hi3516DV300为当前版本所支持的平台，make_test表示全部用例。根据不同需求，编译选项可进行不同选择：
+>说明: hispark_taurus_standard为当前版本所支持的产品，make_test表示全部用例。根据不同需求，编译选项可进行不同选择：
 > -  --product-name   # 编译产品名称（必选）
 > - --build-target   # 指定编译目标（可选）