fio_perf: update fio version and fix python3 string issue

The previous fio version is too old and cann't be compiled.
Signed-off-by: Nyama <yama@redhat.com>

seabios_strict: add strict option on/off test

Check boot result when strict is on/off
Signed-off-by: Nybduan <yduan@redhat.com>

live_snapshot_chain: Flush data to disk before running system_reset

QMP command 'system_reset' is issued after creating files in the guest. The
command has an effect similar to the physical reset button on a PC. But
filesystems may be left in an unclean state which causes the loss of data. Run
the command "sync" to flush the data to disk.
Signed-off-by: NPing Li <pingl@redhat.com>

single_driver_install: Add tests for virtio input devices

added a qemu-img convert test

Verify it can successfully convert a enlarged snapshot.
Signed-off-by: NHaotong Chen <hachen@redhat.com>

iozone_windows: Delete "mem=2048" from iozone_windows.cfg

iozone_windows cfg set mem=2048 before, but when the guest
min memory large then 2G, like win2016 need min memory 4G,
the job will be canceled.
It's better that let the guest use automatic allocation mem value.
Signed-off-by: NPeixiu Hou <phou@redhat.com>

pci_devices: run "info qtree" after the guest boots up

qemu_option_check: python3 compatible, add e1000e, remove e1000

1. fix python 3 compatible issue
2. add e1000e variant
3. remove e1000 for RHEL8 guest
Signed-off-by: NXiyue Wang <xiywang@redhat.com>

multi_queues_test: fix TypeError for python3

Signed-off-by: NSitong Liu <siliu@redhat.com>

seabios.bin_file: Add new case for seabios

ethtool: fix python3 compatible issue

qmp_pmemsave: Decode process.system_output() to string

Signed-off-by: NXiyue Wang <xiywang@redhat.com>

Add bin file check for seabios
Signed-off-by: Nybduan <yduan@redhat.com>

mutl_vms_nics: fix TypeError for python3

Signed-off-by: NSitong Liu <siliu@redhat.com>

balloon_hotplug: invoke simple_hotplug() to set bus under q35

nic_hotplug: python3 compatible, add e1000e, remove e1000

Signed-off-by: NYanan Fu <yfu@redhat.com>

QEMU "info qtree" output depends on information generated by guest
firmware. One example is the bus number in PCI device address. QEMU
retrieves it from the PCI configuration space of the bridge which
creates the bus that a PCI device is attached to. So if test runs
"info qtree" before firmware finishes initializing pci devices, its
output can be incorrect.

The current code works around this timing issue by sleeping 5 seconds.
That is not reliable and doesn't work on my aarch64 system. So I'd
suggest to change the test to not start until it verifies the guest
has booted up. This will make the test execution time slightly longer
but is reliable.
Signed-off-by: NHuan Xiong <huan.xiong@hxt-semitech.com>

balloon_small:Reset memory size to very small during runtime

1. Set very small value(10M) to windows guest, guest memory will
keep still at a minimal working value.
2. Set a minimal boudary memory value to guests, guests can work
normally even after reboot.
Signed-off-by: NLi Jin <lijin@redhat.com>

qemu_guest_agent: add new guest agent case

1.frozen guest FS
2.send shutdown agent cmd to guest
3.send reboot agent cmd to guest
4.send fsthaw cmd to guest
Signed-off-by: NXiangchun Fu <xfu@redhat.com>

Re-write code logic of checking results of network mq change

uefi: check smbios info in uefi env

Jumbo: add ethernet check to see if support jumbo setting

timerdevice_boot: update test steps

Netperf: tweak configuration according whitepaper

1. add support for python3.6
2. decode process output to text
3. update linux netperf to latest 2.7.1
4. re-design the logic for getting server_ip/server_ctl/server_ctl_ip
Signed-off-by: NWenli Quan <wquan@redhat.com>

Signed-off-by: NYumei Huang <yuhuang@redhat.com>

1. Deprecate 'status' as a result condition for mq change function
2. Fix an function parameter error with using decode()
Signed-off-by: NPei Zhang <pezhang@redhat.com>

optmize block_hotplug_negative to support raw disk's hotplug