- 12 2月, 2018 1 次提交
-
-
由 Li Jin 提交于
balloon service should be in running status after send INTERROGATE signal via windows cmd. Signed-off-by: NLi Jin <lijin@redhat.com>
-
- 09 2月, 2018 1 次提交
-
-
由 Li Jin 提交于
1. When windows guest mem is small(e.g.1024M), calculated mem min_size will be larger than ori_mem if ratio=0.5, which will lead balloon cases fail. 2. When do balloon operation in linux guest, we should consider crashkernel value as well,leaving enough memory for guest to avoid guest OOM. So modify the formula and leave a balloon buffer(300M in default) for guest min_sz. Signed-off-by: NLi Jin <lijin@redhat.com>
-
- 31 1月, 2018 1 次提交
-
-
由 Peixiu Hou 提交于
Fio has multiple device function, it allows fio running on multiple disks at the same time. Here use this way to catch run fio on system and data disks at the same time. Signed-off-by: NPeixiu Hou <phou@redhat.com>
-
- 26 1月, 2018 1 次提交
-
-
由 Xu Han 提交于
Add the missing LF at the end of the cfg file. Signed-off-by: NXu Han <xuhan@redhat.com>
-
- 25 1月, 2018 1 次提交
-
-
由 Ping Li 提交于
Make test cases to run with the certain version of qemu Signed-off-by: NPing Li <pingl@redhat.com>
-
- 24 1月, 2018 1 次提交
-
-
由 Sitong Liu 提交于
vm.serial_console is created by default, can be called directly. Signed-off-by: NSitong Liu <siliu@redhat.com>
-
- 20 1月, 2018 1 次提交
-
-
由 Lukáš Doktor 提交于
The pci_devices test needs to insert high-priority devices into low-priority ones, which is not possible due to automatic sorting. Let's disable the autosorting. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
- 19 1月, 2018 1 次提交
-
-
由 Yu Wang 提交于
add install/uninstall and upgrade/downgrade driver cases for pvpanic Signed-off-by: NYu Wang <wyu@redhat.com>
-
- 12 1月, 2018 1 次提交
-
-
由 Yu Wang 提交于
Add driver install case with pvpanic device Signed-off-by: NYu Wang <wyu@redhat.com>
-
- 11 1月, 2018 1 次提交
-
-
由 wyu 提交于
new cases related pvpanic: 1. check pvpanic event after trigger crash by nmi 2. do nmi crash after system_reset/reboot/shutdown/stop_cont 3. do nmi crash after migration Signed-off-by: NYu Wang <wyu@redhat.com>
-
- 09 1月, 2018 1 次提交
-
-
由 Xiyue Wang 提交于
Signed-off-by: NXiyue Wang <xiywang@redhat.com>
-
- 05 1月, 2018 2 次提交
-
-
由 Aihua Liang 提交于
In boot_from_device.check_boot_result(), although console output boot_fail msg, the test result will be set to pass. The logic is not reasonable, correct it. Signed-off-by: NAihua Liang <aliang@redhat.com>
-
由 Peixiu Hou 提交于
"cmd = WINUTILS:\hddsn.exe C:" is not match the lable name in def set_winutils_letter, change it to WIN_UTILS. Signed-off-by: NPeixiu Hou <phou@redhat.com>
-
- 02 1月, 2018 1 次提交
-
-
由 Lukáš Doktor 提交于
The mmio-based arm requires virtio-serial-device and s390x machine requires virtio-serial-ccw device. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
- 29 12月, 2017 1 次提交
-
-
由 Li Jin 提交于
get_memory_boundary function will calculate a min_size for balloon operation. Default ratio value(0.1) is too small which lead to small min_size.Actuall windows minimal mem increases if guest stress increase, sometimes it makes balloon operation fail. Set ratio = 0.5 in the cfg file to avoid this issue. Signed-off-by: NLi Jin <lijin@redhat.com>
-
- 27 12月, 2017 1 次提交
-
-
由 Qianqian Zhu 提交于
Signed-off-by: NQianqian Zhu <qizhu@redhat.com>
-
- 20 12月, 2017 2 次提交
-
-
由 Yumei Huang 提交于
Current 1800s is not long enough to run 1000 times balloon on some hosts. Remove the config to use the default value in base.cfg. Signed-off-by: NYumei Huang <yuhuang@redhat.com>
-
由 Yongxue Hong 提交于
Add a scsi-hd device for system disk on ppc and modify the strategy of checking interrupts. Signed-off-by: NYongxue Hong <yhong@redhat.com>
-
- 13 12月, 2017 3 次提交
-
-
由 Cleber Rosa 提交于
To be able to better tell that an iSCSI configuration value is an example, intended to be changed by the owner of the system (running the test) let's standardize on the same settings (the values at this time). Later, these could be used to FAIL or SKIP tests if the values match the default example values. Signed-off-by: NCleber Rosa <crosa@redhat.com>
-
由 Yumei Huang 提交于
Signed-off-by: NYumei Huang <yuhuang@redhat.com>
-
由 Xiyue Wang 提交于
Signed-off-by: NXiyue Wang <xiywang@redhat.com>
-
- 11 12月, 2017 1 次提交
-
-
由 Zhengtong Liu 提交于
Signed-off-by: NZhengtong Liu <zhengtli@redhat.com>
-
- 08 12月, 2017 2 次提交
-
-
由 Zhengtong Liu 提交于
Signed-off-by: NZhengtong Liu <zhengtli@redhat.com>
-
由 Haotong Chen 提交于
Signed-off-by: NHaotong Chen <hachen@redhat.com>
-
- 07 12月, 2017 1 次提交
-
-
由 Haotong Chen 提交于
Signed-off-by: NHaotong Chen <hachen@redhat.com>
-
- 05 12月, 2017 15 次提交
-
-
由 Xueqiang Wei 提交于
Signed-off-by: NXueqiang Wei <xuwei@redhat.com>
-
由 Lukáš Doktor 提交于
The iscsi target should be configured by users and not hardcoded. Let's use some dummy values which usually result in: AttributeError: 'NoneType' object has no attribute 'logged_in' and from traceback it's obvious it's checking iscsidevice. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
The current variant name RHEL.7.devel.x86_64 clashes with existing filters enabling this test on all architectures and actually corrupting the cartesian product. Let's use `-` to separate the parts. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
On s390x the balloon device is virtio-balloon-ccw and not -pci. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
The s390x supported drive formats is rather limited so it does not make sense to even pretend to support this test. Let's just filter it out. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
This test uses suspend and hibernate and currently is disabled on ppc64 and aarch64. As it does not work on ppc64le and s390 let's disable it everywhere but x86. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
The isa-serial is not available outside x86 world, let's change the filter-out to filter-only. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
This test only makes sense in x86 world. Let's use only instead of out. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
This test uses "/home/test" by default which is usually present as a directory. Let's use "/home/test.img" to decrease the probability of existing directory. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
This test only makes sense on x86 archs and it is currently disabled on q35. Let's enable it only on i440fx then. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
On s390x rtl8139 and e1000 are not supported (similarly to ppc64) and the virtio-net is called virtio-net-ccw. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
The "dev_type" used to be used to parse qtree, but there is a generic implementation which does not rely on dev_type which is not used in the test. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
The "virtio_blk" is generally usable nowadays while it should not clash with the "virtio_scsi" used in the test. Let's use it to boot the machine instead of ide/ahci, which is not supported on all archs. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
Ideally this test should not exists in Avocado-vt as kvm-unit-tests are dynamic and more and more are added each day. Anyway as it exists let's limit it to x86 only as it defines x86 variants. Those who want to run kvm-unit-tests please use pure Avocado instead. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-
由 Lukáš Doktor 提交于
This test allows to check all snapshots, but currently only checks the main image and last snapshot. Let's check one of the middle snapshots as well to see it behaves correctly. Signed-off-by: NLukáš Doktor <ldoktor@redhat.com>
-