block_hotplug.cfg

- block_hotplug: install setup image_copy unattended_install.cdrom
    no RHEL.3.9
    no ide
    virt_test_type = qemu libvirt
    type = block_hotplug
    bootindex_image1 = 0
    images += " stg0"
    boot_drive_stg0 = no
    image_name_stg0 = images/storage0
    image_size_stg0 = 1G
    remove_image_stg0 = yes
    force_create_image_stg0 = yes
    get_disk_cmd = "ls /dev/[hsv]d[a-z]* | sort"
    disk_op_cmd = "dd if=%s of=/dev/null bs=1k count=1000 iflag=direct &&"
    disk_op_cmd += " dd if=/dev/zero of=%s bs=1k count=1000 oflag=direct"
    kill_vm_on_error = yes

    Windows:
        disk_index = "1 2"
        disk_letter = "I J"
        disk_op_cmd = "WIN_UTILS:\Iozone\iozone.exe -azR -r 64k -n 125M -g 512M -M -i 0"
        disk_op_cmd += " -i 1 -b %s:\iozone_test -f %s:\testfile"

    variants:
        - one_pci:
            blk_num = 1
            repeat_times = 1
        - multi_pci:
            blk_num = 2
            repeat_times = 1
            images += " stg1"
            boot_drive_stg1 = no
            image_name_stg1 = images/storage1
            image_size_stg1 = 1G
            remove_image_stg1 = yes
            force_create_image_stg1 = yes

    variants:
        - @default:
        - with_repetition:
            repeat_times = 100
        - with_reboot:
            sub_type_after_plug = boot
            sub_type_after_unplug = boot
            reboot_method = shell
        - with_shutdown:
            variants:
                - after_plug:
                    only with_plug
                    sub_type_after_plug = shutdown
                - after_unplug:
                    sub_type_after_unplug = shutdown
            shutdown_method = shell
            check_img = yes
            repeat_times = 1
        - with_stop_continue:
            sub_type_after_plug = stop_continue
            sub_type_after_unplug = stop_continue
        - with_system_reset:
            sub_type_after_plug = boot
            sub_type_after_unplug = boot
            reboot_method = system_reset
        - with_block_resize:
            only with_plug
            only one_pci
            sub_type_after_plug = block_resize
            blk_extra_params_stg0 += " serial=TARGET_DISK0"
            block_size_cmd = "fdisk -l | grep {0}"
            block_size_pattern = ",\s+(\d+\s+b)ytes"
            disk_change_ratio = "1.5 0.5"
            repeat_times = 1
            Windows:
                block_size_cmd = "wmic diskdrive get size, index"
                block_size_pattern = "1\s+(\d+)"
                accept_ratio = 0.0005
                disk_update_cmd = "echo rescan > cmd"
                disk_update_cmd += " && echo select disk 1 > cmd"
                disk_update_cmd += " && echo select partition 1 >> cmd"
                disk_update_cmd += " && echo extend >> cmd"
                disk_update_cmd += " && echo exit >> cmd"
                disk_update_cmd += " && diskpart /s cmd"
                # "::" is used to separate the commands as it is not used in both Linux and Windows
                disk_update_cmd += "::"
                disk_update_cmd += "echo select disk 1 > cmd"
                disk_update_cmd += " && echo select partition 1 >> cmd"
                disk_update_cmd += " && echo shrink desired=DISK_CHANGE_SIZE >> cmd"
                disk_update_cmd += " && echo exit >> cmd && diskpart /s cmd"
                disk_unit = M
                disk_rescan_cmd = "echo rescan > cmd"
                disk_rescan_cmd += " && echo exit >> cmd"
                disk_rescan_cmd += " && diskpart /s cmd"
            virtio_scsi:
                driver_name = vioscsi
            virtio_blk:
                driver_name = viostor
            fmt_qcow2:
                disk_change_ratio = 1.5
            fmt_raw:
                disk_change_ratio = "1.5 0.5"

    variants:
        - with_plug:
            need_plug = yes
        - without_plug:
            repeat_times = 1
            boot_drive_stg0 = yes
            boot_drive_stg1 = yes
            need_plug = no

    variants:
        - fmt_qcow2:
            image_extra_params = ""
            img_format_type = qcow2
            image_format_stg0 = qcow2
            image_format_stg1 = qcow2
        - fmt_raw:
            image_extra_params = ""
            img_format_type = raw
            image_format_stg0 = raw
            image_format_stg1 = raw

    variants:
        - block_virtio:
            drive_format_stg0 = virtio
            drive_format_stg1 = virtio
            get_disk_pattern = "^/dev/vd[a-z]*$"
        - block_scsi:
            drive_format_stg0 = scsi-hd
            drive_format_stg1 = scsi-hd
            get_disk_pattern = "^/dev/sd[a-z]*$"

    variants:
        - @default:
        - data_plane:
            no Host_RHEL.m6
            only with_plug.with_system_reset.one_pci
            one_pci:
                repeat_times = 1
            iothreads = iothread0
            block_virtio:
                blk_extra_params_stg0 = "iothread=${iothreads}"
            block_scsi:
                no Host_RHEL.m7.u0, Host_RHEL.m7.u1, Host_RHEL.m7.u2
                bus_extra_params_stg0 = "iothread=${iothreads}"