Add device-tree bindings documentation for pxa_camera driver.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add device-tree bindings documentation for the Micron mt9m111 image
sensor.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Since we have get vdev by calling video_devdata() at the beginning of
s5p_mfc_open(), we should just use vdev instead of calling video_devdata()
again in the following code.
Signed-off-by: NZhaowei Yuan <zhaowei.yuan@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Take into account limitations specific to the Exynos3250 SoC,
regarding setting the chroma subsampling control's value.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

JPEG codec on Exynos3250 SoC produces broken raw image if a JPEG
image is decoded to YUV420 format and downscaled by a factor
greater than 2. Prevent this by asserting downscale ratio to 2.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Assure proper crop_rect initialization in case the user space
doesn't call S_SELECTION ioctl.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

V4L2_SEL_TGT_COMPOSE_DEFAULT switch case should select whole
available area of the image and V4L2_SEL_TGT_COMPOSE
should apply user settings.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The jpeg_bound_align_image function needs to know the context
in which it is called, as it needs to align image dimensions in
a slight different manner for Exynos3250, which crops pixels for
specific values in case the format is RGB.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When parsing JPEG header s5p_jpeg_parse_hdr function
should return immediately in case there was an error
while reading a byte.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds support for jpeg codec on Exynos3250 SoC to
the s5p-jpeg driver. Supported raw formats are: YUYV, YVYU, UYVY,
VYUY, RGB565, RGB565X, RGB32, NV12, NV21. The support includes
also scaling and cropping features.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

JPEG IP on Exynos3250 SoC requires enabling two clock gates
for its operation. This patch documents this requirement.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On a normal condition, no errors should happen at xc5000
firmware upload is done. So, print at the dmesg if something
bad happens.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Currently, firmware retry logic keeps reading from FS every
time during the retry logic. This is not needed. Instead,
only release the firmware read after success.

While here, make the non-debug messages less verbose, as it
only matters to the user if the firmware was successfully
loaded, or if some error happened.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

With the current code, if something bad happens during the
firmware init process, the device will keep trying forever,
and removing it would cause an OOPS.

Instead, try only a limited amount of time. If not, fails.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

HVR-950Q uses an I2C remote controller at address 0x47 (7-bits
notation). Add support for it.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The IR dprintk message that prints a RC5 decoding failure
is not much helpful, as it doesn't tell on what bit the
error occurred.

Add such information, in order to make the debug message
more useful.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On some hardware (au0828/au8522), the hardware is broken with
regards to the initial pulse detection. So, the driver needs to
produce a fake start pulse. That limits the acceptable protocols,
as it is not possible to produce a fake pulse that would cover
all supported protocols.

So, allow the driver to explicitly set the allowed protocols.

If the driver doesn't specify, keep the old behavior.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Commits 21dc61d3 and 7a1dd50b reduced the board I2C
speed to 20 MHz by default, due to a I2C stretch issue:
while xc5000 uses i2c stretch when a command is sent to it,
au0828 doesn't support this feature.

However, this is needed only for Xceive tuners. The other
I2C devices can work at the max speed.

So, revert the workarounds at board level, handling it at
I2C level, only when talking with xc5000.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As reported by Kbuildtest:

   In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0:
   drivers/media/dvb-frontends/si2165.h:57:9: warning: 'struct si2165_config' declared inside parameter list [enabled by default]
     struct i2c_adapter *i2c)
            ^
   drivers/media/dvb-frontends/si2165.h:57:9: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:157:21: error: variable 'hauppauge_930C_HD_1113xx_si2165_config' has initializer but incomplete type
    static const struct si2165_config hauppauge_930C_HD_1113xx_si2165_config = {
                        ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:158:2: error: unknown field 'i2c_addr' specified in initializer
     .i2c_addr = 0x64,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:158:2: warning: excess elements in struct initializer [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:158:2: warning: (near initialization for 'hauppauge_930C_HD_1113xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:2: error: unknown field 'chip_mode' specified in initializer
     .chip_mode = SI2165_MODE_PLL_XTAL,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:15: error: 'SI2165_MODE_PLL_XTAL' undeclared here (not in a function)
     .chip_mode = SI2165_MODE_PLL_XTAL,
                  ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:2: warning: excess elements in struct initializer [enabled by default]
     .chip_mode = SI2165_MODE_PLL_XTAL,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:2: warning: (near initialization for 'hauppauge_930C_HD_1113xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:160:2: error: unknown field 'ref_freq_Hz' specified in initializer
     .ref_freq_Hz = 16000000,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:160:2: warning: excess elements in struct initializer [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:160:2: warning: (near initialization for 'hauppauge_930C_HD_1113xx_si2165_config') [enabled by default]
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:163:21: error: variable 'pctv_quatro_stick_1114xx_si2165_config' has initializer but incomplete type
    static const struct si2165_config pctv_quatro_stick_1114xx_si2165_config = {
                        ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:164:2: error: unknown field 'i2c_addr' specified in initializer
     .i2c_addr = 0x64,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:164:2: warning: excess elements in struct initializer [enabled by default]
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:164:2: warning: (near initialization for 'pctv_quatro_stick_1114xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:165:2: error: unknown field 'chip_mode' specified in initializer
     .chip_mode = SI2165_MODE_PLL_EXT,
     ^
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:165:15: error: 'SI2165_MODE_PLL_EXT' undeclared here (not in a function)
     .chip_mode = SI2165_MODE_PLL_EXT,
                  ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:165:2: warning: excess elements in struct initializer [enabled by default]
     .chip_mode = SI2165_MODE_PLL_EXT,
     ^
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:165:2: warning: (near initialization for 'pctv_quatro_stick_1114xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:166:2: error: unknown field 'ref_freq_Hz' specified in initializer
     .ref_freq_Hz = 24000000,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:166:2: warning: excess elements in struct initializer [enabled by default]
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:166:2: warning: (near initialization for 'pctv_quatro_stick_1114xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c: In function 'dvb_init':
   drivers/media/usb/cx231xx/cx231xx-dvb.c:731:3: warning: passing argument 1 of 'si2165_attach' from incompatible pointer type [enabled by default]
      dev->dvb->frontend = dvb_attach(si2165_attach,
      ^
   In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0:
   drivers/media/dvb-frontends/si2165.h:55:36: note: expected 'const struct si2165_config *' but argument is of type 'const struct si2165_config *'
    static inline struct dvb_frontend *si2165_attach(
                                       ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:764:3: warning: passing argument 1 of 'si2165_attach' from incompatible pointer type [enabled by default]
      dev->dvb->frontend = dvb_attach(si2165_attach,
      ^
   In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0:
   drivers/media/dvb-frontends/si2165.h:55:36: note: expected 'const struct si2165_config *' but argument is of type 'const struct si2165_config *'
    static inline struct dvb_frontend *si2165_attach(
                                       ^

That happens because the frontend was disabled by .config, but the
si2165_attach void stub require those structs, and also the
drivers that call it.

While here, remove the duplicated info about the possible I2C
addresses.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/pci/solo6x10/solo6x10-disp.c:221 solo_set_motion_block() error: potential null dereference
'buf'.  (kzalloc returns null)

Also propagate this error up the chain.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Commit 958c7c7e ("[media] v4l2-ctrls: fix corner case in round-to-range code") broke
controls that use a negative range.

The cause was a s32/u32 mixup: ctrl->step is unsigned while all others are signed. So
the result type of the expression '(ctrl)->maximum - ((ctrl)->step / 2)' became unsigned,
making 'val >= (ctrl)->maximum - ((ctrl)->step / 2)' true, since '((u32)-128) > 128'
(if val = -128, maximum = 128 and step = 1).

So carefully cast (step / 2) to s32.

There was one cast of step to s32 where it should have been u32 because both offset and
step are unsigned, so casting to signed makes no sense there. You do need a cast to u32
there, because otherwise architectures that have no 64-bit division start complaining
(step is a u64).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some vendors have their on keymap table that are used on
all (or almost all) models for that vendor.

So, instead of specifying the keymap table per USB ID,
let's use the Vendor ID's table by default.

At the end, this will mean less code to be added when newer
devices for those vendors are added.

Of course, if rc_map is specified per board, it takes
precedence.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for the si2165-based cx231xx devices:
	[2013:025e] PCTV QuatroStick 522e
	[2013:0259] PCTV QuatroStick 521e
	[2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)

They're similar to the already supported:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix the following warnings:
	drivers/media/usb/cx231xx/cx231xx-cards.c: In function 'read_eeprom':
	drivers/media/usb/cx231xx/cx231xx-cards.c:979:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:025e] PCTV QuatroStick 522e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:0259] PCTV QuatroStick 521e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1113xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)

After loading the driver the first open to dvb device node fails.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is needed to support PCTV QuatroStick 522e which uses a si2157.
The si2157 driver is written using i2c_client attachment.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The same card entry is used for HVR-4400 and HVR-5500.
Only HVR-5500 has been tested.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

DVB-T was tested  with 8MHz BW channels in germany
This driver is the simplest possible, it uses automatic mode for all
parameters (TPS).

Added spectrum inversion support.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We don't have license to redistribute this firmware, so extract
it from the driver, and add the needed headers.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using some random value, return an error if the
PCB config is not available or doesn't match a know profile
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That makes easier to understand the code. It would also help
to add support for having boards with just digital support
on some latter patch, as allowed by some PCB configs.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The initialization is already too complex. Use devm_ functions
to make the code simpler and easier to modify.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On some newer boards, like HVR-930C HD, the information at
the PCB tables are sometimes higher than the ones actually
available on the device. That causes the probing code to
go past the interfaces array.

Add checks to the interface number before going past the
array.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The max number of interfaces was read from the wrong descriptor.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This protocol is found on Dreambox remotes

[m.chehab@samsung.com: CodingStyle fixes and conflict fix]
Signed-off-by: NMarcel Mol <marcel@mesa.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Multiple pinctrl states are defined for 8, 16 and 24 data pin groups in PPI peripheral.
The driver should select correct group before set up further PPI parameters.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On NOMMU architecture page fault is not triggered if a deleted list entry is
accessed without reinit.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>