Still experimental.
Not enabled as default unless model=auto is passed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the routing more exactly for avoiding the duplicated controls for
the very same effect for multiple capture routes in Conexant auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the intermediate selector widget in the capture path provides the
boost volume, create the corresponding volume control.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just for safety reason (for avoiding any possible regressions), don't
enable auto-parser as default for cxt5045 and 5051, as well as 5047.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It can (must for some) be used for all Conexnat codecs safely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of giving fixed arrays, look for ADC nids dynamically in the
tree in Conexant auto-parser code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similarly like other Conexant codecs, now model=auto is supported for
cxt5047.

But the auto-parser mode isn't activated as default yet, since BIOS
pin-configs seem often broken on machines with this codec.  User need
to pass model=auto explicitly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Handle not only a single-depth input-route but two-level depth routes
(PIN->MUX->ADC), too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Keep the registered input-pins in imux_pins[], and fix the inconsistent
use of sepc->auto_mic_ext.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Extend the existing auto-parser for CX2064x for cxt5051 codec.
Now the auto-parser supports ADC-switching for this codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some codecs have no mute caps in audio I/O widgets.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of keeping always EAPD on, turn on/off appropriately at jack
plugging in Conexant auto-parser mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The wrong id is assigned for external/internal mics in the auto-mic
selection parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AMD chipsets often behave pretty badly regarding the DMA position
reporting.  It results in the bad quality audio recording.
Using position_fix=3 works well in general for them, so let's enable
it as default for AMD.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix NULL-dereference when try to use alt_playback since those codecs
which support multistreaming playback usually have more than 1 adc but
the driver should create alt_capture when spec->stream_analog_alt_capture
is also defined.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The check of chained fixup list entry was done against the wrong element.
A stupid mistake during refactoring.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also fixed the assignment of multiout.dac_nids to satisfy const.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit c6b35874.

It turned out that there are different pin configurations for this
PCI SSID, including multi-channel modes.  And more proper fix for
allowing line-out mutes will come up in 2.6.40 tree, so we won't need
this fixup any more there.
Reported-by: NAndrew Clayton <andrew@digital-domain.net>
Reported-by: NEmmanuel Benisty <benisty.e@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PCI SSID is 1025:031c and the codec SSID is 1025:031d,
so the driver mistakes this for a SKU value, but looking at
the numbers, this is obviously wrong.

Cc: stable@kernel.org (2.6.38+)
BugLink: http://bugs.launchpad.net/bugs/761861Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Helpful for debugging.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

PC Beep was not being reported as enabled on my EeePC 901:
        SKU: enable_pcbeep=0x0
Signed-off-by: NDaniel Cordero <danielcordero@lavabit.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds support for the Terratec Aureon 7.1 USB which uses a
C-Media cm6206 and needs all the quirks already found in the past.
Signed-off-by: NWolfgang Breyha <wbreyha@gmx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Auto-Mute Mode control is useful even when only two outputs
(e.g. HP and speaker) are available.  Then user can enable/disable
the auto-mute behavior on the fly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not only supporting the line-out automute as additional feature
to the existing headphone automute, now the headphone jack can
mute the line-out alone even without the speaker outs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

By popular demands, I add the functionality to mute / unmute the
line-out jacks per the headphone plug / unplug.  For achieving this
and keeping the compatibility with the old behavior, the new mixer
enum "Auto-Mute Mode" is added.  With this, user can control the
auto-mute behavior either disabled, speaker-only or lineout+speaker.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>