- 29 10月, 2008 5 次提交
-
-
由 Gary Hade 提交于
Impact: remove incorrect WARN_ON(1) Gets rid of dmesg spam created during physical memory hot-add which will very likely confuse users. The change removes what appears to be debugging code which I assume was unintentionally included in: x86: arch/x86/mm/init_64.c printk fixes commit 10f22ddeSigned-off-by: NGary Hade <garyhade@us.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
Impact: some new sparse warnings in e820.c etc, but no functional change. As with regular ioremap, iounmap etc, annotate with __iomem. Fixes the following sparse warnings, will produce some new ones elsewhere in arch/x86 that will get worked out over time. arch/x86/mm/ioremap.c:402:9: warning: cast removes address space of expression arch/x86/mm/ioremap.c:406:10: warning: cast adds address space to expression (<asn:2>) arch/x86/mm/ioremap.c:782:19: warning: Using plain integer as NULL pointer Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
Impact: fewer sparse warnings, no functional changes arch/x86/kernel/vsmp_64.c:87:14: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:87:14: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:87:14: got void *[assigned] address arch/x86/kernel/vsmp_64.c:88:22: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:88:22: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:88:22: got void * arch/x86/kernel/vsmp_64.c:100:23: warning: incorrect type in argument 2 (different address spaces) arch/x86/kernel/vsmp_64.c:100:23: expected void volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:100:23: got void * arch/x86/kernel/vsmp_64.c:101:23: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:101:23: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:101:23: got void * arch/x86/mm/gup.c:235:6: warning: incorrect type in argument 1 (different base types) arch/x86/mm/gup.c:235:6: expected void const volatile [noderef] <asn:1>*<noident> arch/x86/mm/gup.c:235:6: got unsigned long [unsigned] [assigned] start Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: change over-mapping to precise mapping, fix /proc/meminfo output v2: fix less than 1G ram system handling when gart aperture is 0xdc000000 - 0xe0000000 it return 0xc0000000 - 0xe0000000 that is not right. this patch fix that will get exact mapping on 256g sytem with that aperture after patch LBSuse:~ # cat /proc/meminfo MemTotal: 264742432 kB MemFree: 263920628 kB Buffers: 1416 kB Cached: 24468 kB ... DirectMap4k: 5760 kB DirectMap2M: 3205120 kB DirectMap1G: 265289728 kB it is consistent to LBSuse:~ # cat /sys/kernel/debug/kernel_page_tables .. ---[ Low Kernel Mapping ]--- 0xffff880000000000-0xffff880000200000 2M RW GLB x pte 0xffff880000200000-0xffff880040000000 1022M RW PSE GLB x pmd 0xffff880040000000-0xffff8800c0000000 2G RW PSE GLB NX pud 0xffff8800c0000000-0xffff8800d7e00000 382M RW PSE GLB NX pmd 0xffff8800d7e00000-0xffff8800d7fa0000 1664K RW GLB NX pte 0xffff8800d7fa0000-0xffff8800d8000000 384K pte 0xffff8800d8000000-0xffff8800dc000000 64M pmd 0xffff8800dc000000-0xffff8800e0000000 64M RW PSE GLB NX pmd 0xffff8800e0000000-0xffff880100000000 512M pmd 0xffff880100000000-0xffff880800000000 28G RW PSE GLB NX pud 0xffff880800000000-0xffff880824600000 582M RW PSE GLB NX pmd 0xffff880824600000-0xffff8808247f0000 1984K RW GLB NX pte 0xffff8808247f0000-0xffff880824800000 64K RW PCD GLB NX pte 0xffff880824800000-0xffff880840000000 440M RW PSE GLB NX pmd 0xffff880840000000-0xffff884000000000 223G RW PSE GLB NX pud 0xffff884000000000-0xffff884028000000 640M RW PSE GLB NX pmd 0xffff884028000000-0xffff884040000000 384M pmd 0xffff884040000000-0xffff888000000000 255G pud 0xffff888000000000-0xffffc20000000000 58880G pgd Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joerg Roedel 提交于
Impact: fix AMD Family 11h boot hangs / USB device problems The AMD Fam11h CPUs have a K8 northbridge. This northbridge is different from other family's because it lacks GART support (as I just learned). But the kernel implicitly expects a GART if it finds an AMD northbridge. Fix this by removing the Fam11h northbridge id from the scan list of K8 northbridges. This patch also changes the message in the GART driver about missing K8 northbridges to tell that the GART is missing which is the correct information in this case. Reported-by: NJouni Malinen <jkmalinen@gmail.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 10月, 2008 10 次提交
-
-
由 Yinghai Lu 提交于
so users are not confused with memhole causing big total ram we don't need to worry about 32 bit, because memhole is always above max_low_pfn. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ken'ichi Ohmichi 提交于
Impact: fix kdump crash on 32-bit sparsemem kernels Since linux-2.6.27, kdump has failed on i386 sparsemem kernel. 1st-kernel gets a panic just before switching to 2nd-kernel. The cause is that a kernel accesses invalid mem_section by page_to_pfn(image->swap_page) at machine_kexec(). image->swap_page is allocated if kexec for hibernation, but it is not allocated if kdump. So if kdump, a kernel should not access the mem_section corresponding to image->swap_page. The attached patch fixes this invalid access. Signed-off-by: NKen'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Cc: kexec-ml <kexec@lists.infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
APIC_DEBUG is always 2. need to update inquire_remote_apic to check apic_verbosity with it instead. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Oruba 提交于
Removed author's email address from MODULE_AUTHOR. Signed-off-by: NPeter Oruba <peter.oruba@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Oruba 提交于
Removed one author's email address from module init message. Signed-off-by: NPeter Oruba <peter.oruba@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Oruba 提交于
Signed-off-by: NPeter Oruba <peter.oruba@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Markus Metzger 提交于
Improve the help text of the X86_PTRACE_BTS config. Make X86_DS invisible and depend on X86_PTRACE_BTS. Reported-by: NRoland Dreier <rdreier@cisco.com> Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Uwe Hermann 提交于
The Documentation/i386 and Documentation/x86_64 directories and their contents have been moved into Documentation/x86. Fix references to those files accordingly. Signed-off-by: NUwe Hermann <uwe@hermann-uwe.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Shaohua Li 提交于
Impact: fix crash with memory hotplug Shuahua Li found: | I just did some experiments on a desktop for memory hotplug and this bug | triggered a crash in my test. | | Yinghai's suggestion also fixed the bug. We don't need to round it, just remove that extra -1 Signed-off-by: NYinghai <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: get correct page count in /proc/meminfo found page count in /proc/meminfo is nor correct on 1G system in VirtualBox 2.0.4 # cat /proc/meminfo MemTotal: 1017508 kB MemFree: 822700 kB Buffers: 1456 kB Cached: 26632 kB SwapCached: 0 kB ... Hugepagesize: 2048 kB DirectMap4k: 4032 kB DirectMap2M: 18446744073709549568 kB with this patch get: ... DirectMap4k: 4032 kB DirectMap2M: 1044480 kB which is consistent to kernel_page_tables ---[ Low Kernel Mapping ]--- 0xffff880000000000-0xffff880000001000 4K RW PCD GLB x pte 0xffff880000001000-0xffff88000009f000 632K RW GLB x pte 0xffff88000009f000-0xffff8800000a0000 4K RW PCD GLB x pte 0xffff8800000a0000-0xffff880000200000 1408K RW GLB x pte 0xffff880000200000-0xffff88003fe00000 1020M RW PSE GLB x pmd 0xffff88003fe00000-0xffff88003fff0000 1984K RW GLB NX pte 0xffff88003fff0000-0xffff880040000000 64K pte 0xffff880040000000-0xffff888000000000 511G pud 0xffff888000000000-0xffffc20000000000 58880G pgd Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 10月, 2008 25 次提交
-
-
由 Cliff Wickman 提交于
Impact: on SGI UV platforms, fix boot crash UV initialization is currently called too late to call alloc_bootmem_pages(). The current sequence is: start_kernel() mem_init() free_all_bootmem() <--- discard of bootmem rest_init() kernel_init() smp_prepare_cpus() native_smp_prepare_cpus() uv_system_init() <--- uses alloc_bootmem_pages() It should be calling kmalloc(). Signed-off-by: NCliff Wickman <cpw@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Chris Lalancette 提交于
Impact: fix guest kernel boot crash on certain configs Recent i686 2.6.27 kernels with a certain amount of memory (between 736 and 855MB) have a problem booting under a hypervisor that supports batched mprotect (this includes the RHEL-5 Xen hypervisor as well as any 3.3 or later Xen hypervisor). The problem ends up being that xen_ptep_modify_prot_commit() is using virt_to_machine to calculate which pfn to update. However, this only works for pages that are in the p2m list, and the pages coming from change_pte_range() in mm/mprotect.c are kmap_atomic pages. Because of this, we can run into the situation where the lookup in the p2m table returns an INVALID_MFN, which we then try to pass to the hypervisor, which then (correctly) denies the request to a totally bogus pfn. The right thing to do is to use arbitrary_virt_to_machine, so that we can be sure we are modifying the right pfn. This unfortunately introduces a performance penalty because of a full page-table-walk, but we can avoid that penalty for pages in the p2m list by checking if virt_addr_valid is true, and if so, just doing the lookup in the p2m table. The attached patch implements this, and allows my 2.6.27 i686 based guest with 768MB of memory to boot on a RHEL-5 hypervisor again. Thanks to Jeremy for the suggestions about how to fix this particular issue. Signed-off-by: NChris Lalancette <clalance@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Chris Lalancette <clalance@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: allow extended partitions on md devices. md: use sysfs_notify_dirent to notify changes to md/dev-xxx/state md: use sysfs_notify_dirent to notify changes to md/array_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - add support for Elantech touchpads Input: i8042 - add Blue FB5601 to noloop exception table
-
git://git.o-hand.com/linux-mfd由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Make WM8400 depend on I2C until SPI is submitted mfd: add missing Kconfig entry for da903x
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: build UWB before USB/WUSB
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for Sony Vaio VGX-TP1E HID: fix lock imbalance in hiddev HID: fix lock imbalance in hidraw HID: fix hidbus/appletouch device binding regression HID: add hid_type to general hid struct HID: quirk for OLED devices present in ASUS G50/G70/G71 HID: Remove "default m" for Thrustmaster and Zeroplus HID: fix hidraw_exit section mismatch HID: add support for another Gyration remote control Revert "HID: Invert HWHEEL mappings for some Logitech mice"
-
由 Randy Dunlap 提交于
Fix docbook fatal errors (file location changed): docproc: lin2628-rc1/include/asm-x86/io_32.h: No such file or directory make[1]: *** [Documentation/DocBook/deviceiobook.xml] Error 1 docproc: lin2628-rc1/include/asm-x86/atomic_32.h: No such file or directory make[1]: *** [Documentation/DocBook/kernel-api.xml] Error 1 docproc: lin2628-rc1/include/asm-x86/mca_dma.h: No such file or directory make[1]: *** [Documentation/DocBook/mcabook.xml] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Allow macros that are annotated with kernel-doc to contain whitespace between the '#' and "define". It's valid and being used, so allow it. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: leds-hp-disk: fix build warning ACPI: Oops in ACPI with git latest ACPI suspend: build fix for ACPI_SLEEP=n && XEN_SAVE_RESTORE=y. toshiba_acpi: always call input_sync() after input_report_switch() ACPI: Always report a sync event after a lid state change ACPI: cpufreq, processor: fix compile error in drivers/acpi/processor_perflib.c i7300_idle: Fix compile warning CONFIG_I7300_IDLE_IOAT_CHANNEL not defined i7300_idle: Cleanup based review comments i7300_idle: Disable ioat channel only on platforms where ile driver can load
-
由 Linus Torvalds 提交于
.. fix all the worst problems in -rc1
-
由 Geert Uytterhoeven 提交于
If CONFIG_AMIGA_BUILTIN_SERIAL=m, I get the following warnings: | drivers/char/amiserial.c: At top level: | drivers/char/amiserial.c:2138: warning: data definition has no type or storage class | drivers/char/amiserial.c:2138: warning: type defaults to 'int' in declaration of 'console_initcall' | drivers/char/amiserial.c:2138: warning: parameter names (without types) in function declaration | drivers/char/amiserial.c:2134: warning: 'amiserial_console_init' defined but not used because console_initcall() is not defined (nor really sensible) in the modular case. So disable serial console support if the driver is modular. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davide Libenzi 提交于
In commit f337b9c5 ("epoll: drop unnecessary test") Thomas found that there is an unnecessary (always true) test in ep_send_events(). The callback never inserts into ->rdllink while the send loop is performed, and also does the ~EP_PRIVATE_BITS test. Given we're holding the mutex during this time, the conditions tested inside the loop are always true. HOWEVER. The test "!ep_is_linked(&epi->rdllink)" wasn't there because we insert into ->rdllink, but because the send-events loop might terminate before the whole list is scanned (-EFAULT). In such cases, when the loop terminates early, and when a (leftover) file received an event while we're performing the lockless loop, we need such test to avoid to double insert the epoll items. The list_splice() done a few steps below, will correctly re-insert the ones that were left on "txlist". This should fix the kenrel.org bugzilla entry 11831. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
Some userland apps seem to pass in a "0" for the seconds, and several seconds worth of usecs to select(). The old kernels accepted this just fine, so the new kernels must too. However, due to the upscaling of the microseconds to nanoseconds we had some cases where we got math overflow, and depending on the GCC version (due to inlining decisions) that actually resulted in an -EINVAL return. This patch fixes this by adding the excess microseconds to the seconds field. Also with thanks to Marcin Slusarz for spotting some implementation bugs in the diagnostics patches. Reported-by: NCarlos R. Mafra <crmafra2@gmail.com> Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
The default for the regulatory compatibility option is wrong; if you picked the default you ended up with a non-functional wifi system (at least I did on Fedora 9 with iwl4965). I don't think even the October 2008 releases of the various distros has the new userland so clearly the default is wrong, and also we can't just go about deleting this in 2.6.29... Change the default to "y" and also adjust the config text a little to reflect this. This patch fixes regression #11859 With thanks to Johannes Berg for the diagnostics Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Rothwell 提交于
/scratch/sfr/next/kernel/cgroup.c: In function 'cgroup_tasks_start': /scratch/sfr/next/kernel/cgroup.c:2107: warning: unused variable 'i' Introduced in commit cc31edce "cgroups: convert tasks file to use a seq_file with shared pid array". Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX hwmon: (abituguru3) Cosmetic whitespace fixes hwmon: (adt7473) Fix voltage conversion routines hwmon: (lm90) Add support for the LM99 16 degree offset hwmon: (lm90) Fix handling of hysteresis value hwmon-vid: Add support for AMD family 10h CPUs hwmon: (w83781d) Fix linking when built-in
-
由 Francois Romieu 提交于
This reverts commit 7bf6bf48. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
a) semicolon before the function body is a bad idea b) it's const struct foo, not struct const foo c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver() d) compiling is occasionally useful. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alistair John Strachan 提交于
Switch the AW9D-MAX over from port probing to the preferred DMI probe method. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Tested-by: NJustin Piszcz <jpiszcz@lucidpixels.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Alistair John Strachan 提交于
As the probable result of zealous copy/pasting, many supported boards contain sensor names with trailing whitespace. Though this is not a huge problem, it is inconsistent with other sensor names, and with other similar hwmon drivers. Additionally, the DMI nag message added in 2.6.27 was missing a space between two sentence fragments -- might as well clean that up too. Doesn't alter any kernel text, just data. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Reported-by: NJustin Piszcz <jpiszcz@lucidpixels.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Fix voltage conversion routines. Based on an earlier patch from Paulius Zaleckas. According to the datasheet voltage is scaled with resistors and value 192 is nominal voltage. 0 is 0V. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Darrick J. Wong <djwong@us.ibm.com>
-
由 Jean Delvare 提交于
The LM99 differs from the LM86, LM89 and LM90 in that it reports remote temperatures (temp2) 16 degrees lower than they really are. So far we have been cheating and handled this in userspace but it really should be handled by the driver directly. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org>
-
由 Jean Delvare 提交于
There are several problems in the way the hysteresis value is handled by the lm90 driver: * In show_temphyst(), specific handling of the MAX6646 is missing, so the hysteresis is reported incorrectly if the critical temperature is over 127 degrees C. * In set_temphyst(), the new hysteresis register value is written to the chip but data->temp_hyst isn't updated accordingly, so there is a short period of time (up to 2 seconds) where the old hystereris value will be returned while the new one is already active. * In set_temphyst(), the critical temperature which is used as a base to compute the value of the hysteresis register lacks device-specific handling. As a result, the value of the hysteresis register might be incorrect for the ADT7461 and MAX6646 chips. Fix these 3 bugs. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Nate Case <ncase@xes-inc.com>
-