Add DMA mode support for the MMCIF controller on mackerel.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Remember to also check for the CONFIG_MMC_SH_MMCIF_MODULE option
for the case of a modular MMCIF driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Export the following sh7377 multimedia hardware blocks
using UIO: VPU, VEU[0-3], JPU and SPU2[0-1]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Export the following sh7372 multimedia hardware blocks
using UIO: VPU, VEU[0-3], JPU and SPU2[0-1]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Export the following sh7367 multimedia hardware blocks
using UIO: VPU, VEU[0-3], VEU2H, JPU and SPU1
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the sh7377 serial port types to make use of
PORT_SCIFA and PORT_SCIFB. This makes the software
match the sh7377 data sheet.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* Set receive enable and transmit enable bits of SCASCR0 (E6C400089).
  Values previously written to this register was bogus.

  Curiously earlyprintk works with the previous code.

* Remove duplicate initialisation of GPIO port 152, SCIFA0_TXD (0xE6053098).
  This should have no effect other than to very slightly reduce the amount of
  code.
Reported-by: NMagnus Damm <magnus.damm@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
  PCI: Don't use dmi_name_in_vendors in quirk
  PCI: remove unused AER functions
  PCI/sysfs: move bus cpuaffinity to class dev_attrs
  PCI: add rescan to /sys/.../pci_bus/.../
  PCI: update bridge resources to get more big ranges when allocating space (again)
  KVM: Use pci_store/load_saved_state() around VM device usage
  PCI: Add interfaces to store and load the device saved state
  PCI: Track the size of each saved capability data area
  PCI/e1000e: Add and use pci_disable_link_state_locked()
  x86/PCI: derive pcibios_last_bus from ACPI MCFG
  PCI: add latency tolerance reporting enable/disable support
  PCI: add OBFF enable/disable support
  PCI: add ID-based ordering enable/disable support
  PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot.
  PCI: Set PCIE maxpayload for card during hotplug insertion
  PCI/ACPI: Report _OSC control mask returned on failure to get control
  x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs
  PCI: handle positive error codes
  PCI: check pci_vpd_pci22_wait() return
  PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio
  ...

Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be
moved the intel SMBUS ID definitons to the i2c-i801.c driver.

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: obey minleft values during extent allocation correctly
  xfs: reset buffer pointers before freeing them
  xfs: avoid getting stuck during async inode flushes
  xfs: fix xfs_itruncate_start tracing
  xfs: fix duplicate workqueue initialisation
  xfs: kill off xfs_printk()
  xfs: fix race condition in AIL push trigger
  xfs: make AIL target updates and compares 32bit safe.
  xfs: always push the AIL to the target
  xfs: exit AIL push work correctly when AIL is empty
  xfs: ensure reclaim cursor is reset correctly at end of AG
  xfs: add an x86 compat handler for XFS_IOC_ZERO_RANGE
  xfs: fix compiler warning in xfs_trace.h
  xfs: cleanup duplicate initializations
  xfs: reduce the number of pagb_lock roundtrips in xfs_alloc_clear_busy
  xfs: exact busy extent tracking
  xfs: do not immediately reuse busy extent ranges
  xfs: optimize AGFL refills

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
  ARM: bcmring: convert to use sp804 clockevents
  ARM: bcmring: convert to sp804 clocksource
  ARM: 6912/1: bcmring: Add clkdev table in init_early
  clockevents: ARM sp804: obtain sp804 timer rate via clks
  clockevents: ARM sp804: allow clockevent name to be specified
  clocksource: ARM sp804: obtain sp804 timer rate via clks
  clocksource: ARM sp804: allow clocksource name to be specified
  clocksource: convert OMAP1 to 32-bit down counting clocksource
  clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
  clocksource: convert SPEAr platforms 16-bit up counting clocksource
  clocksource: convert Integrator/AP 16-bit down counting clocksource
  clocksource: convert W90x900 24-bit down counting clocksource
  clocksource: convert ARM 32-bit down counting clocksources
  clocksource: convert ARM 32-bit up counting clocksources
  clocksource: add common mmio clocksource
  ARM: update sa1100 to reflect PXA updates
  ARM: omap1: convert to using readl/writel instead of volatile struct
  ARM: omap1: delete useless interrupt handler
  ARM: s5p: consolidate selection of timer register
  ARM: 6939/1: fix missing 'cpu_relax()' declaration
  ...

Fixed the broken links in the SubmittingPatches file.

[ The old links turn out to not be broken after all, but the new links
  are certainly more readable - Linus ]
Signed-off-by: NVikram Narayanan <vikram186@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixed typos.

v2: Incorporated changes by Randy Dunlap.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update LXR (Linux cross reference) web link.
Signed-off-by: NHarry Wei <harryxiyou@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

max_user_instances was removed in this commit:

   commit 9df04e1f
   Author: Davide Libenzi <davidel@xmailserver.org>
   Date:   Thu Jan 29 14:25:26 2009 -0800

    epoll: drop max_user_instances and rely only on max_user_watches

but the documentation entry was not removed.

Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NLucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

v2, updated based on comments from Joe and Paul.

Update to Documentation/dontdiff, based on many updates to
various .gitignore patches over the last 2 years.

Initially begun by Michael Prokop <mika@grml.org>, with lots of
changes by Randy Dunlap.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Michael Prokop <mika@grml.org>
Cc: Joe Perches <joe@perches.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, apic: Include module.h header in apic_flat_64.c
  x86, apic: Make apic drivers static
  x86, apic: Clean up bigsmp apic selection code
  x86, apic: Use .apicdrivers section for the apic drivers list
  x86, apic: Introduce .apicdrivers section to find the list of apic drivers
  x86, x2apic: Move the common bits to x2apic.h
  x86, x2apic: Minimize IPI register writes using cluster groups
  x86, x2apic: Track the x2apic cluster sibling map
  x86, x2apic: Remove duplicate code for IPI mask routines
  x86, apic: Use probe routines to simplify apic selection
  x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic'
  x86, ioapic: Consolidate gsi routing info into 'struct ioapic'
  x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic'
  x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic'
  x86, ioapic: Add struct ioapic
  x86, ioapic: Remove duplicate code for saving/restoring RTEs
  x86, ioapic: Use ioapic_saved_data while enabling intr-remapping
  x86, ioapic: Allocate ioapic_saved_data early
  x86, ioapic: Fix potential resume deadlock

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Increase SCHED_LOAD_SCALE resolution
  sched: Introduce SCHED_POWER_SCALE to scale cpu_power calculations
  sched: Cleanup set_load_weight()

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (970 commits)
  staging: usbip: replace usbip_u{dbg,err,info} and printk with dev_ and pr_
  staging:iio: Trivial kconfig reorganization and uniformity improvements.
  staging:iio:documenation partial update.
  staging:iio: use pollfunc allocation helpers in remaining drivers.
  staging:iio:max1363 misc cleanups and use of for_each_bit_set to simplify event code spitting out.
  staging:iio: implement an iio_info structure to take some of the constant elements out of iio_dev.
  staging:iio:meter:ade7758: Use private data space from iio_allocate_device
  staging:iio:accel:lis3l02dq make write_reg_8 take value not a pointer to value.
  staging:iio: ring core cleanups + check if read_last available in lis3l02dq
  staging:iio:core cleanup: squash tiny wrappers and use dev_set_name to handle creation of event interface name.
  staging:iio: poll func allocation clean up.
  staging:iio:ad7780 trivial unused header cleanup.
  staging:iio:adc: AD7780: Use private data space from iio_allocate_device + trivial fixes
  staging:iio:adc:AD7780: Convert to new channel registration method
  staging:iio:adc: AD7606: Drop dev_data in favour of iio_priv()
  staging:iio:adc: AD7606: Consitently use indio_dev
  staging:iio: Rip out helper for software rings.
  staging:iio:adc:AD7298: Use private data space from iio_allocate_device
  staging:iio: rationalization of different buffer implementation hooks.
  staging:iio:imu:adis16400 avoid allocating rx, tx, and state separately from iio_dev.
  ...

Fix up trivial conflicts in
 - drivers/staging/intel_sst/intelmid.c: patches applied in both branches
 - drivers/staging/rt2860/common/cmm_data_{pci,usb}.c: removed vs spelling
 - drivers/staging/usbip/vhci_sysfs.c: trivial header file inclusion

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
  USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  USB: UHCI: Support big endian GRUSBHC HC
  sparc: add {read,write}*_be routines
  USB: UHCI: Add support for big endian descriptors
  USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  USB: UHCI: Add support for big endian mmio
  usb-storage: Correct adjust_quirks to include latest flags
  usb/isp1760: Fix possible unlink problems
  usb/isp1760: Move function isp1760_endpoint_disable() within file.
  USB: remove remaining usages of hcd->state from usbcore and fix regression
  usb: musb: ux500: add configuration and build options for ux500 dma
  usb: musb: ux500: add dma glue layer for ux500
  usb: musb: ux500: add dma name for ux500
  usb: musb: ux500: add ux500 specific code for gadget side
  usb: musb: fix compile error
  usb-storage: fix up the unusual_realtek device list
  USB: gadget: f_audio: Fix invalid dereference of initdata
  EHCI: don't rescan interrupt QHs needlessly
  OHCI: fix regression caused by nVidia shutdown workaround
  USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  ...

apic_flat_64.c needs to include module.h because it uses
EXPORT_SYMBOL_GPL().

This fixes these warnings on some !SMP randconfigs:

  arch/x86/kernel/apic/apic_flat_64.c:31: warning: data definition has no type or storage class
  arch/x86/kernel/apic/apic_flat_64.c:31: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
  arch/x86/kernel/apic/apic_flat_64.c:31: warning: parameter names (without types) in function declaration
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20110523104300.dd532a99.randy.dunlap@oracle.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
  serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
  tty/serial: Fix break handling for PORT_TEGRA
  tty/serial: Add explicit PORT_TEGRA type
  n_tracerouter and n_tracesink ldisc additions.
  Intel PTI implementaiton of MIPI 1149.7.
  Kernel documentation for the PTI feature.
  export kernel call get_task_comm().
  tty: Remove to support serial for S5P6442
  pch_phub: Support new device ML7223
  8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
  ASoC: Update cx20442 for TTY API change
  pch_uart: Support new device ML7223 IOH
  parport: Use request_muxed_region for IT87 probe and lock
  tty/serial: add support for Xilinx PS UART
  n_gsm: Use print_hex_dump_bytes
  drivers/tty/moxa.c: Put correct tty value
  TTY: tty_io, annotate locking functions
  TTY: serial_core, remove superfluous set_task_state
  TTY: serial_core, remove invalid test
  Char: moxa, fix locking in moxa_write
  ...

Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.

I did the hci_ldisc thing as an evil merge, cleaning things up.

cpu_sibling_mask() is not defined unless CONFIG_SMP is defined, so it
must not be used directly in the code without ifdef protection.

To solve the problem and avoid ifdefs in the code, define
for_each_sibling() and use it instead.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: Reorder clock bases
  hrtimers: Avoid touching inactive timer bases
  hrtimers: Make struct hrtimer_cpu_base layout less stupid
  timerfd: Manage cancelable timers in timerfd
  clockevents: Move C3 stop test outside lock
  alarmtimer: Drop device refcount after rtc_open()
  alarmtimer: Check return value of class_find_device()
  timerfd: Allow timers to be cancelled when clock was set
  hrtimers: Prepare for cancel on clock was set timers

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ns9xxx/include/mach/uncompress.h

Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' and 'spear' into for-linus

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Deal with hyperthetical case of PAGE_SIZE > 2M
  slub: Remove node check in slab_free
  slub: avoid label inside conditional
  slub: Make CONFIG_DEBUG_PAGE_ALLOC work with new fastpath
  slub: Avoid warning for !CONFIG_SLUB_DEBUG
  slub: Remove CONFIG_CMPXCHG_LOCAL ifdeffery
  slub: Move debug handlign in __slab_free
  slub: Move node determination out of hotpath
  slub: Eliminate repeated use of c->page through a new page variable
  slub: get_map() function to establish map of free objects in a slab
  slub: Use NUMA_NO_NODE in get_partial
  slub: Fix a typo in config name

Merge branches 'consolidate-clksrc', 'consolidate-flash', 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate

bcmring has a set of four sp804 timers incorporated, yet it has its
own copy of the sp804 code.  Convert its clockevent implementation
to the standard sp804 support code.

Cc: Jiandong Zheng <jdzheng@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

bcmring has a set of four sp804 timers incorporated, yet it has its
own copy of the sp804 code.  Convert its clocksource implementation
to the standard sp804 support code.

Cc: Jiandong Zheng <jdzheng@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move adding clkdev table to init_early to make sure the common sp804 clockevents can be initialized properly.
Signed-off-by: NJiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This allows platforms to specify the rate of the SP804 clockevent via
the clk subsystem.  While ARM boards clock these at 1MHz, BCMRing also
has SP804 timers but are clocked at different rates.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This allows platforms to specify the clcokevent name upon registration.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This allows platforms to specify the rate of the SP804 clocksource via
the clk subsystem.  While ARM boards clock these at 1MHz, BCMRing also
has SP804 timers but are clocked at different rates.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This allows platforms to specify the clocksource name upon
registration, which is necessary should they wish to register more
than one sp804 clocksource.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert the OMAP1 32-bit down counting clocksource to the generic
clocksource infrastructure.
Tested-by: NTony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert the MXS timrotv2 32-bit down counting clocksource to the
generic clocksource infrastructure.

Cc: Sascha Hauer <kernel@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert SPEAr platforms 16-bit up counting clocksource, which requires
a 16-bit register access read rather than 32-bit.
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert the Integrator/AP 16-bit down-counting clocksource to the
generic clocksource infrastructure.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert the W90x900 24-bit down-counting clocksource to the generic
mmio clocksource infrastructure
Acked-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>