Bug introduced in

commit 10ae9bd2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Feb 1 13:59:17 2010 +0100

    drm/i915: blow away userspace mappings before fence change

The problem is that when there's no fence reg assigned and the object
is mapped at a fenceable offset in the gtt, the userspace mappings won't
be torn down. Which happens on untiled->tiled transition quite often
on 4th gen and later because there fencing does not have any special
alignment constraints (as opposed to 2nd and 3rd gen on which I've tested
the original commit).

Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=26993Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Eric Anholt <eric@anholt.net> (fixes OpenArena)
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NEric Anholt <eric@anholt.net>

This CPU should be coherent with graphics in this direction, though
flushing graphics caches are still required.  Fixes a system reset on
module load on Sandybridge with 4G+ memory.
Signed-off-by: NEric Anholt <eric@anholt.net>

This is similar to 14bc490b which
respected it for how much of the GTT we would actually use.  Now we
won't clear beyond allocated memory when filling the GTT with scratch
page addresses.
Signed-off-by: NEric Anholt <eric@anholt.net>

We should free "params" before returning.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Cc: stable@kernel.org (for .33)
Signed-off-by: NEric Anholt <eric@anholt.net>

Fixes:
  http://bugzilla.kernel.org/show_bug.cgi?id=15527
  NULL pointer dereference in i915_gem_object_save_bit_17_swizzle

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<f82b5d2b>] i915_gem_object_save_bit_17_swizzle+0x5b/0xc0 [i915]
Call Trace:
[<f82aea55>] ? i915_gem_object_put_pages+0x125/0x150 [i915]
[<f82aeb71>] ? i915_gem_object_get_pages+0xf1/0x110 [i915]
[<f82b0de8>] ? i915_gem_object_bind_to_gtt+0xb8/0x2a0 [i915]
[<c02db74d>] ? drm_mm_get_block_generic+0x4d/0x180
[<f82b11cd>] ? i915_gem_mmap_gtt_ioctl+0x16d/0x240 [i915]
[<f82ae786>] ? i915_gem_madvise_ioctl+0x86/0x120 [i915]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reported-by: maciej.rutecki@gmail.com
Cc: stable@kernel.org
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

IS_GEN6 missed to include SandyBridge mobile chip, which failed in
i915_probe_agp() for memory config detection. Fix it with a device
info flag.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

String constants that are continued on subsequent lines with \ will cause
spurious whitespace in the resulting output.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
[anholt: whacked it to wrap to 80 columns instead]
Signed-off-by: NEric Anholt <eric@anholt.net>

This could resolve HW deadlocks where a unit downstream of the VS is
waiting for more input, the VS has one vertex queued up but not
dispatched because it hopes to get one more vertex for 2x4 dispatch,
and software isn't handing more vertices down because it's waiting for
rendering to complete.  The B-Spec says you should always have this
bit set.
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NPriit Laes <plaes@plaes.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

The continue just after this call with loop around and wait for the
request just added just fine. This leads to slightly more compact code.
Signed-Off-by: NOwain G. Ainsworth <oga@openbsd.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

We probably don't need it for most of the other driver ioctls as well,
but we explicitly did locking when doing the GEM pieces.  On CPU-bound
graphics tasks, the BKL was showing up as 1-2% of CPU time.
Signed-off-by: NEric Anholt <eric@anholt.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  ACPI: processor: push file static MADT pointer into internal map_madt_entry()
  ACPI: processor: refactor internal map_lsapic_id()
  ACPI: processor: refactor internal map_x2apic_id()
  ACPI: processor: refactor internal map_lapic_id()
  ACPI: processor: driver doesn't need to evaluate _PDC
  ACPI: processor: remove early _PDC optin quirks
  ACPI: processor: add internal processor_physically_present()
  ACPI: processor: move acpi_get_cpuid into processor_core.c
  ACPI: processor: export acpi_get_cpuid()
  ACPI: processor: mv processor_pdc.c processor_core.c
  ACPI: processor: mv processor_core.c processor_driver.c
  ACPI: plan to delete "acpi=ht" boot option
  ACPI: remove "acpi=ht" DMI blacklist
  PNPACPI: add bus number support
  PNPACPI: add window support
  resource: add window support
  resource: add bus number support
  resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type
  acpiphp: Execute ACPI _REG method for hotadded devices
  ACPI video: Be more liberal in validating _BQC behaviour
  ...

Commit 6992f533 ("sysfs: Use one lockdep
class per sysfs attribute.") introduced this requirement.  First, at25
was fixed manually.  Then, other occurences were found with coccinelle
and the following semantic patch.  Results were reviewed and fixed up:

    @ init @
    identifier struct_name, bin;
    @@

    	struct struct_name {
    		...
    		struct bin_attribute bin;
    		...
    	};

    @ main extends init @
    expression E;
    statement S;
    identifier name, err;
    @@

    (
    	struct struct_name *name;
    |
    -	struct struct_name *name = NULL;
    +	struct struct_name *name;
    )
    	...
    (
    	sysfs_bin_attr_init(&name->bin);
    |
    +	sysfs_bin_attr_init(&name->bin);
    	if (sysfs_create_bin_file(E, &name->bin))
    		S
    |
    +	sysfs_bin_attr_init(&name->bin);
    	err = sysfs_create_bin_file(E, &name->bin);
    )
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release

There's no real need for a pointer to the MADT to be global. The only
function who uses it is map_madt_entry.

This allows us to remove some more ugly #ifdefs.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Un-nest the if statements for readability.

Remove comments that re-state the obvious.

Change the control flow so that we no longer need a temp variable.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Untangle the nested if conditions to make this function look
more similar to the other map_*apic_id() functions.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Untangle the if() statement a little for readability.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Now that the early _PDC evaluation path knows how to correctly
evaluate _PDC on only physically present processors, there's no
need for the processor driver to evaluate it later when it loads.

To cover the hotplug case, push _PDC evaluation down into the
hotplug paths.

Cc: x86@kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Now that we check for physically present processors before blindly
evaluating _PDC, we no longer need to maintain a DMI opt-in table
nor a kernel param.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Detect if a processor is physically present before evaluating _PDC.

We want this because some BIOS will provide a _PDC even for processors
that are not present. These bogus _PDC methods then attempt to load
non-existent tables, which causes problems.

Avoid those bogus landmines.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Enumerating processors (via MADT/_MAT) belongs in the processor core,
which is always built-in, rather than living in the processor driver
which may not be built.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Rename static get_cpu_id() to acpi_get_cpuid() and export it.

This change also gives us an opportunity to remove the
#ifndef CONFIG_SMP from processor_driver.c and into a header file
where it properly belongs.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

We've renamed the old processor_core.c to processor_driver.c, to
convey the idea that it can be built modular and has driver-like
bits.

Now let's re-create a processor_core.c for the bits needed
statically by the rest of the kernel. The contents of processor_pdc.c
are a good starting spot, so let's just rename that file and
complete our three card monte.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The ACPI processor driver can be built as a module. But it has
pieces of code that should always be built statically into the
kernel.

The plan is for processor_core.c to contain the static bits while
processor_driver.c contains the module-like bits.

Since the bulk of the code in the current processor_core.c is
module-like, first step is to rename the file to processor_driver.c

Next step will re-create processor_core.c and cherry-pick out
the static bits.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

SuSE added these entries when deploying ACPI in Linux-2.4.
I pulled them into Linux-2.6 on 2003-08-09.
Over the last 6+ years, several entries have proven to be
unnecessary and deleted, while no new entries have been added.
Matthew suggests that they now have negative value, and I agree.
Based-on-patch-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add support for bus number resources.  This is for bridges with a range of
bus numbers behind them.  Previously, PNP ignored bus number resources.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add support for resource windows.  This is for bridge resources, i.e.,
regions where a bridge forwards transactions from the primary to the
secondary side.  This does not add support for *setting* windows via
the /proc interface.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add support for resource windows.  This is for bridge resources, i.e.,
regions where a bridge forwards transactions from the primary to the
secondary side.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add support for bus number resources.  This is for bridges with a range of
bus numbers behind them.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

No functional change; this just makes room for another resource type.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The original code returns a freed pointer.  This function is expected to
return NULL on errors.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>

Per ACPI spec, _ERG method should be executed before device driver
gets control for hotpluged device. Firmware might do some configuration
there. See http://bugzilla.kernel.org/show_bug.cgi?id=10805. In this
machine, _REG method of docked device will configure cardbus bridge.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Tested-by: NPaul Martin <pm@debian.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Right now, if _BQC returns a value we don't understand we immediately
invalidate it. Change this behaviour so we only invalidate it if it
continues to give an invalid answer after we've already set a brightness.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mce: Fix build bug with CONFIG_PROVE_LOCKING=y && CONFIG_X86_MCE_INTEL=y

drivers/i2c/busses/i2c-xiic.c:493: error: implicit declaration of function 'mdelay'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: "Richard Röjfors" <richard.rojfors@pelagicore.com>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This file was missed in the original patch that went into Linus' tree.

Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add ALDI/MEDION netbook E1222 to qurik reset table
  Input: ALPS - fix stuck buttons on some touchpads
  Input: wm831x-on - convert to use genirq
  Input: ads7846 - add wakeup support
  Input: appletouch - fix integer overflow issue
  Input: ad7877 - increase pen up imeout
  Input: ads7846 - add support for AD7843 parts
  Input: bf54x-keys - fix system hang when pressing a key
  Input: alps - add support for the touchpad on Toshiba Tecra A11-11L
  Input: remove BKL, fix input_open_file() locking
  Input: serio_raw - remove BKL
  Input: mousedev - remove BKL
  Input: add driver for TWL4030 vibrator device
  Input: enable remote wakeup for PNP i8042 keyboard ports
  Input: scancode in get/set_keycodes should be unsigned
  Input: i8042 - use platfrom_create_bundle() helper
  Input: wacom - merge out and in prox events
  Input: gamecon - fix off by one range check
  Input: wacom - replace WACOM_PKGLEN_PENABLED