Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 09 5月, 2009 1 次提交
  3. 23 4月, 2009 1 次提交
  5. 07 4月, 2009 1 次提交
  7. 01 4月, 2009 1 次提交
  9. 25 3月, 2009 2 次提交
  11. 05 3月, 2009 2 次提交
  13. 21 2月, 2009 1 次提交
  15. 19 2月, 2009 1 次提交
  17. 22 1月, 2009 1 次提交
  19. 19 1月, 2009 1 次提交
  21. 16 1月, 2009 1 次提交
  23. 08 1月, 2009 1 次提交
    • D
      NOMMU: Make VMAs per MM as for MMU-mode linux · 8feae131
      由 David Howells 提交于 
      Make VMAs per mm_struct as for MMU-mode linux.  This solves two problems:

 (1) In SYSV SHM where nattch for a segment does not reflect the number of
     shmat's (and forks) done.

 (2) In mmap() where the VMA's vm_mm is set to point to the parent mm by an
     exec'ing process when VM_EXECUTABLE is specified, regardless of the fact
     that a VMA might be shared and already have its vm_mm assigned to another
     process or a dead process.

A new struct (vm_region) is introduced to track a mapped region and to remember
the circumstances under which it may be shared and the vm_list_struct structure
is discarded as it's no longer required.

This patch makes the following additional changes:

 (1) Regions are now allocated with alloc_pages() rather than kmalloc() and
     with no recourse to __GFP_COMP, so the pages are not composite.  Instead,
     each page has a reference on it held by the region.  Anything else that is
     interested in such a page will have to get a reference on it to retain it.
     When the pages are released due to unmapping, each page is passed to
     put_page() and will be freed when the page usage count reaches zero.

 (2) Excess pages are trimmed after an allocation as the allocation must be
     made as a power-of-2 quantity of pages.

 (3) VMAs are added to the parent MM's R/B tree and mmap lists.  As an MM may
     end up with overlapping VMAs within the tree, the VMA struct address is
     appended to the sort key.

 (4) Non-anonymous VMAs are now added to the backing inode's prio list.

 (5) Holes may be punched in anonymous VMAs with munmap(), releasing parts of
     the backing region.  The VMA and region structs will be split if
     necessary.

 (6) sys_shmdt() only releases one attachment to a SYSV IPC shared memory
     segment instead of all the attachments at that addresss.  Multiple
     shmat()'s return the same address under NOMMU-mode instead of different
     virtual addresses as under MMU-mode.

 (7) Core dumping for ELF-FDPIC requires fewer exceptions for NOMMU-mode.

 (8) /proc/maps is now the global list of mapped regions, and may list bits
     that aren't actually mapped anywhere.

 (9) /proc/meminfo gains a line (tagged "MmapCopy") that indicates the amount
     of RAM currently allocated by mmap to hold mappable regions that can't be
     mapped directly.  These are copies of the backing device or file if not
     anonymous.

These changes make NOMMU mode more similar to MMU mode.  The downside is that
NOMMU mode requires some extra memory to track things over NOMMU without this
patch (VMAs are no longer shared, and there are now region structs).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NMike Frysinger <vapier.adi@gmail.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
      8feae131
  25. 07 1月, 2009 1 次提交
  27. 30 12月, 2008 1 次提交
    • F
      tracing/kmemtrace: normalize the raw tracer event to the unified tracing API · 36994e58
      由 Frederic Weisbecker 提交于 
      Impact: new tracer plugin

This patch adapts kmemtrace raw events tracing to the unified tracing API.

To enable and use this tracer, just do the following:

 echo kmemtrace > /debugfs/tracing/current_tracer
 cat /debugfs/tracing/trace

You will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584

That was to stay backward compatible with the format output produced in
inux/tracepoint.h.

This is the default ouput, but note that I tried something else.

If you change an option:

echo kmem_minimalistic > /debugfs/trace_options

and then cat /debugfs/trace, you will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

   -      C                            0xffff88007c088780          file_free_rcu
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc780     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc870     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc960     -1   d_alloc
   +      K   1304   1312   000000d0   0xffff8800791d7340     -1   reiserfs_alloc_inode
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K    992   1000   000000d0   0xffff880079045b58     -1   alloc_inode
   +      K    768   1024   000080d0   0xffff88007c096400     -1   alloc_pipe_info
   +      K    240    240   000000d0   0xffff8800790dca50     -1   d_alloc
   +      K    272    320   000080d0   0xffff88007c088780     -1   get_empty_filp
   +      K    272    320   000080d0   0xffff88007c088000     -1   get_empty_filp

Yeah I shall confess kmem_minimalistic should be: kmem_alternative.

Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.

On the ALLOC/FREE column, + means an allocation and - a free.

On the type column, you have K = kmalloc, C = cache, P = page

I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....

About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.

I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      36994e58
  29. 29 12月, 2008 3 次提交
  31. 19 12月, 2008 1 次提交
    • P
      "Tree RCU": scalable classic RCU implementation · 64db4cff
      由 Paul E. McKenney 提交于 
      This patch fixes a long-standing performance bug in classic RCU that
results in massive internal-to-RCU lock contention on systems with
more than a few hundred CPUs.  Although this patch creates a separate
flavor of RCU for ease of review and patch maintenance, it is intended
to replace classic RCU.

This patch still handles stress better than does mainline, so I am still
calling it ready for inclusion.  This patch is against the -tip tree.
Nevertheless, experience on an actual 1000+ CPU machine would still be
most welcome.

Most of the changes noted below were found while creating an rcutiny
(which should permit ejecting the current rcuclassic) and while doing
detailed line-by-line documentation.

Updates from v9 (http://lkml.org/lkml/2008/12/2/334):

o	Fixes from remainder of line-by-line code walkthrough,
	including comment spelling, initialization, undesirable
	narrowing due to type conversion, removing redundant memory
	barriers, removing redundant local-variable initialization,
	and removing redundant local variables.

	I do not believe that any of these fixes address the CPU-hotplug
	issues that Andi Kleen was seeing, but please do give it a whirl
	in case the machine is smarter than I am.

	A writeup from the walkthrough may be found at the following
	URL, in case you are suffering from terminal insomnia or
	masochism:

	http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf

o	Made rcutree tracing use seq_file, as suggested some time
	ago by Lai Jiangshan.

o	Added a .csv variant of the rcudata debugfs trace file, to allow
	people having thousands of CPUs to drop the data into
	a spreadsheet.	Tested with oocalc and gnumeric.  Updated
	documentation to suit.

Updates from v8 (http://lkml.org/lkml/2008/11/15/139):

o	Fix a theoretical race between grace-period initialization and
	force_quiescent_state() that could occur if more than three
	jiffies were required to carry out the grace-period
	initialization.  Which it might, if you had enough CPUs.

o	Apply Ingo's printk-standardization patch.

o	Substitute local variables for repeated accesses to global
	variables.

o	Fix comment misspellings and redundant (but harmless) increments
	of ->n_rcu_pending (this latter after having explicitly added it).

o	Apply checkpatch fixes.

Updates from v7 (http://lkml.org/lkml/2008/10/10/291):

o	Fixed a number of problems noted by Gautham Shenoy, including
	the cpu-stall-detection bug that he was having difficulty
	convincing me was real.  ;-)

o	Changed cpu-stall detection to wait for ten seconds rather than
	three in order to reduce false positive, as suggested by Ingo
	Molnar.

o	Produced a design document (http://lwn.net/Articles/305782/).
	The act of writing this document uncovered a number of both
	theoretical and "here and now" bugs as noted below.

o	Fix dynticks_nesting accounting confusion, simplify WARN_ON()
	condition, fix kerneldoc comments, and add memory barriers
	in dynticks interface functions.

o	Add more data to tracing.

o	Remove unused "rcu_barrier" field from rcu_data structure.

o	Count calls to rcu_pending() from scheduling-clock interrupt
	to use as a surrogate timebase should jiffies stop counting.

o	Fix a theoretical race between force_quiescent_state() and
	grace-period initialization.  Yes, initialization does have to
	go on for some jiffies for this race to occur, but given enough
	CPUs...

Updates from v6 (http://lkml.org/lkml/2008/9/23/448):

o	Fix a number of checkpatch.pl complaints.

o	Apply review comments from Ingo Molnar and Lai Jiangshan
	on the stall-detection code.

o	Fix several bugs in !CONFIG_SMP builds.

o	Fix a misspelled config-parameter name so that RCU now announces
	at boot time if stall detection is configured.

o	Run tests on numerous combinations of configurations parameters,
	which after the fixes above, now build and run correctly.

Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line):

o	Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a
	changeset some time ago, and finally got around to retesting
	this option).

o	Fix some tracing bugs in rcupreempt that caused incorrect
	totals to be printed.

o	I now test with a more brutal random-selection online/offline
	script (attached).  Probably more brutal than it needs to be
	on the people reading it as well, but so it goes.

o	A number of optimizations and usability improvements:

	o	Make rcu_pending() ignore the grace-period timeout when
		there is no grace period in progress.

	o	Make force_quiescent_state() avoid going for a global
		lock in the case where there is no grace period in
		progress.

	o	Rearrange struct fields to improve struct layout.

	o	Make call_rcu() initiate a grace period if RCU was
		idle, rather than waiting for the next scheduling
		clock interrupt.

	o	Invoke rcu_irq_enter() and rcu_irq_exit() only when
		idle, as suggested by Andi Kleen.  I still don't
		completely trust this change, and might back it out.

	o	Make CONFIG_RCU_TRACE be the single config variable
		manipulated for all forms of RCU, instead of the prior
		confusion.

	o	Document tracing files and formats for both rcupreempt
		and rcutree.

Updates from v4 for those missing v5 given its bad subject line:

o	Separated dynticks interface so that NMIs and irqs call separate
	functions, greatly simplifying it.  In particular, this code
	no longer requires a proof of correctness.  ;-)

o	Separated dynticks state out into its own per-CPU structure,
	avoiding the duplicated accounting.

o	The case where a dynticks-idle CPU runs an irq handler that
	invokes call_rcu() is now correctly handled, forcing that CPU
	out of dynticks-idle mode.

o	Review comments have been applied (thank you all!!!).
	For but one example, fixed the dynticks-ordering issue that
	Manfred pointed out, saving me much debugging.  ;-)

o	Adjusted rcuclassic and rcupreempt to handle dynticks changes.

Attached is an updated patch to Classic RCU that applies a hierarchy,
greatly reducing the contention on the top-level lock for large machines.
This passes 10-hour concurrent rcutorture and online-offline testing on
128-CPU ppc64 without dynticks enabled, and exposes some timekeeping
bugs in presence of dynticks (exciting working on a system where
"sleep 1" hangs until interrupted...), which were fixed in the
2.6.27 kernel.  It is getting more reliable than mainline by some
measures, so the next version will be against -tip for inclusion.
See also Manfred Spraul's recent patches (or his earlier work from
2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2).
We will converge onto a common patch in the fullness of time, but are
currently exploring different regions of the design space.  That said,
I have already gratefully stolen quite a few of Manfred's ideas.

This patch provides CONFIG_RCU_FANOUT, which controls the bushiness
of the RCU hierarchy.  Defaults to 32 on 32-bit machines and 64 on
64-bit machines.  If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT,
there is no hierarchy.  By default, the RCU initialization code will
adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA
architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable
this balancing, allowing the hierarchy to be exactly aligned to the
underlying hardware.  Up to two levels of hierarchy are permitted
(in addition to the root node), allowing up to 16,384 CPUs on 32-bit
systems and up to 262,144 CPUs on 64-bit systems.  I just know that I
am going to regret saying this, but this seems more than sufficient
for the foreseeable future.  (Some architectures might wish to set
CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs.
If this becomes a real problem, additional levels can be added, but I
doubt that it will make a significant difference on real hardware.)

In the common case, a given CPU will manipulate its private rcu_data
structure and the rcu_node structure that it shares with its immediate
neighbors.  This can reduce both lock and memory contention by multiple
orders of magnitude, which should eliminate the need for the strange
manipulations that are reported to be required when running Linux on
very large systems.

Some shortcomings:

o	More bugs will probably surface as a result of an ongoing
	line-by-line code inspection.

	Patches will be provided as required.

o	There are probably hangs, rcutorture failures, &c.  Seems
	quite stable on a 128-CPU machine, but that is kind of small
	compared to 4096 CPUs.  However, seems to do better than
	mainline.

	Patches will be provided as required.

o	The memory footprint of this version is several KB larger
	than rcuclassic.

	A separate UP-only rcutiny patch will be provided, which will
	reduce the memory footprint significantly, even compared
	to the old rcuclassic.  One such patch passes light testing,
	and has a memory footprint smaller even than rcuclassic.
	Initial reaction from various embedded guys was "it is not
	worth it", so am putting it aside.

Credits:

o	Manfred Spraul for ideas, review comments, and bugs spotted,
	as well as some good friendly competition.  ;-)

o	Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers,
	Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton
	for reviews and comments.

o	Thomas Gleixner for much-needed help with some timer issues
	(see patches below).

o	Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos,
	Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton
	Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines
	alive despite my heavy abuse^Wtesting.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      64db4cff
  33. 26 11月, 2008 1 次提交
    • I
      debugobjects: add boot parameter default value · 3ae70205
      由 Ingo Molnar 提交于 
      Impact: add .config driven boot parameter default value

Right now debugobjects can only be activated if the debug_objects
boot parameter is passed in via the boot command line.

Make this more convenient (and randomizable) by also providing
a .config method. Enable it by default. (DEBUG_OBJECTS itself
is default-off)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3ae70205
  35. 17 10月, 2008 2 次提交
    • T
      block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT · 0e11e342
      由 Tejun Heo 提交于 
      CONFIG_DEBUG_BLOCK_EXT_DEVT can break booting even on some modern
distros.  Add BIG FAT WARNING to keep people at a safe distance.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      0e11e342
    • J
      driver core: basic infrastructure for per-module dynamic debug messages · 346e15be
      由 Jason Baron 提交于 
      Base infrastructure to enable per-module debug messages.

I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.

The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.

Future plans include extending this functionality to subsystems, that define 
their own debug levels and flags.

Usage:

Dynamic debugging is controlled by the debugfs file, 
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:

	<module_name> <enabled=0/1>
		.
		.
		.

	<module_name> : Name of the module in which the debug call resides
	<enabled=0/1> : whether the messages are enabled or not

For example:

	snd_hda_intel enabled=0
	fixup enabled=1
	driver enabled=0

Enable a module:

	$echo "set enabled=1 <module_name>" > dynamic_printk/modules

Disable a module:

	$echo "set enabled=0 <module_name>" > dynamic_printk/modules

Enable all modules:

	$echo "set enabled=1 all" > dynamic_printk/modules

Disable all modules:

	$echo "set enabled=0 all" > dynamic_printk/modules

Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.

[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      346e15be
  37. 09 10月, 2008 4 次提交
  39. 03 10月, 2008 1 次提交
    • P
      rcu: RCU-based detection of stalled CPUs for Classic RCU · 2133b5d7
      由 Paul E. McKenney 提交于 
      This patch adds stalled-CPU detection to Classic RCU.  This capability
is enabled by a new config variable CONFIG_RCU_CPU_STALL_DETECTOR, which
defaults disabled.

This is a debugging feature to detect infinite loops in kernel code, not
something that non-kernel-hackers would be expected to care about.

This feature can detect looping CPUs in !PREEMPT builds and looping CPUs
with preemption disabled in PREEMPT builds.  This is essentially a port of
this functionality from the treercu patch, replacing the stall debug patch
that is already in tip/core/rcu (commit 67182ae1).

The changes from the patch in tip/core/rcu include making the config
variable name match that in treercu, changing from seconds to jiffies to
avoid spurious warnings, and printing a boot message when this feature
is enabled.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2133b5d7
  41. 10 9月, 2008 1 次提交
    • A
      debug: add notifier chain debugging · 1b2439db
      由 Arjan van de Ven 提交于 
      during some development we suspected a case where we left something
in a notifier chain that was from a module that was unloaded already...
and that sort of thing is rather hard to track down.

This patch adds a very simple sanity check (which isn't all that
expensive) to make sure the notifier we're about to call is
actually from either the kernel itself of from a still-loaded
module, avoiding a hard-to-chase-down crash.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1b2439db
  43. 03 9月, 2008 1 次提交
    • T
      powerpc: Work around gcc's -fno-omit-frame-pointer bug · 7563dc64
      由 Tony Breeds 提交于 
      This bug is causing random crashes
(http://bugzilla.kernel.org/show_bug.cgi?id=11414).

-fno-omit-frame-pointer is only needed on powerpc when -pg is also
supplied, and there is a gcc bug that causes incorrect code generation
on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack
locations below the stack pointer, which is not allowed by the ABI
because those locations can and sometimes do get corrupted by an
interrupt.

This ensures that CONFIG_FRAME_POINTER is only selected by ftrace.
When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work
around the gcc codegen bug.

Patch based on work by:
	Andreas Schwab <schwab@suse.de>
	Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      7563dc64
  45. 17 8月, 2008 1 次提交
  47. 13 8月, 2008 1 次提交
    • R
      docsrc: build Documentation/ sources · 3794f3e8
      由 Randy Dunlap 提交于 
      Currently source files in the Documentation/ sub-dir can easily bit-rot
since they are not generally buildable, either because they are hidden in
text files or because there are no Makefile rules for them.  This needs to
be fixed so that the source files remain usable and good examples of code
instead of bad examples.

Add the ability to build source files that are in the Documentation/ dir.
Add to Kconfig as "BUILD_DOCSRC" config symbol.

Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the
Documentation/ sources.  Or enable BUILD_DOCSRC in the *config system.
However, this symbol depends on HEADERS_CHECK since the header files need
to be installed (for userspace builds).

Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32,
sparc64, powerpc, sh, m68k, & mips.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3794f3e8
  49. 11 8月, 2008 1 次提交
    • P
      rcu, debug: detect stalled grace periods · 67182ae1
      由 Paul E. McKenney 提交于 
      this is a diagnostic patch for Classic RCU.

The approach is to record a timestamp at the beginning
of the grace period (in rcu_start_batch()), then have
rcu_check_callbacks() complain if:

 1.	it is running on a CPU that has holding up grace periods for
 	a long time (say one second).  This will identify the culprit
 	assuming that the culprit has not disabled hardware irqs,
 	instruction execution, or some such.

 2.	it is running on a CPU that is not holding up grace periods,
 	but grace periods have been held up for an even longer time
 	(say two seconds).

It is enabled via the default-off CONFIG_DEBUG_RCU_STALL kernel parameter.

Rather than exponential backoff, it backs off to once per 30 seconds.
My feeling upon thinking on it was that if you have stalled RCU grace
periods for that long, a few extra printk() messages are probably the
least of your worries...
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      67182ae1
  51. 25 7月, 2008 1 次提交
    • M
      mm: add a basic debugging framework for memory initialisation · 6b74ab97
      由 Mel Gorman 提交于 
      Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6b74ab97
  53. 22 7月, 2008 1 次提交
  55. 28 6月, 2008 1 次提交
  57. 19 6月, 2008 2 次提交
    • J
      MM: virtual address debug · 59ea7463
      由 Jiri Slaby 提交于 
      Add some (configurable) expensive sanity checking to catch wrong address
translations on x86.

- create linux/mmdebug.h file to be able include this file in
  asm headers to not get unsolvable loops in header files
- __phys_addr on x86_32 became a function in ioremap.c since
  PAGE_OFFSET, is_vmalloc_addr and VMALLOC_* non-constasts are undefined
  if declared in page_32.h
- add __phys_addr_const for initializing doublefault_tss.__cr3

Tested on 386, 386pae, x86_64 and x86_64 numa=fake=2.

Contains Andi's enable numa virtual address debug patch.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      59ea7463
    • P
      rcu: make rcutorture more vicious: reinstate boot-time testing · 31a72bce
      由 Paul E. McKenney 提交于 
      This patch re-institutes the ability to build rcutorture directly into
the Linux kernel.  The reason that this capability was removed was that
this could result in your kernel being pretty much useless, as rcutorture
would be running starting from early boot.  This problem has been avoided
by (1) making rcutorture run only three seconds of every six by default,
(2) adding a CONFIG_RCU_TORTURE_TEST_RUNNABLE that permits rcutorture
to be quiesced at boot time, and (3) adding a sysctl in /proc named
/proc/sys/kernel/rcutorture_runnable that permits rcutorture to be
quiesced and unquiesced when built into the kernel.

Please note that this /proc file is -not- available when rcutorture
is built as a module.  Please also note that to get the earlier
take-no-prisoners behavior, you must use the boot command line to set
rcutorture's "stutter" parameter to zero.

The rcutorture quiescing mechanism is currently quite crude: loops
in each rcutorture process that poll a global variable once per tick.
Suggestions for improvement are welcome.  The default action will
be to reduce the polling rate to a few times per second.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      31a72bce
  59. 16 6月, 2008 1 次提交
    • I
      Revert "prohibit rcutorture from being compiled into the kernel" · 1462a200
      由 Ingo Molnar 提交于 
      This reverts commit 9aaffc89.

That commit was a very bad idea. RCU_TORTURE found many boot timing
bugs and other sorts of bugs in the past, so excluding it from
boot images is very silly.

The option already depends on DEBUG_KERNEL and is disabled by default.
Even when it runs, the test threads are reniced. If it annoys people
we could add a runtime sysctl.
      1462a200
  61. 25 5月, 2008 1 次提交