These inode operations are no longer used; remove them.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4_dx_csum_verify() returns the success return value in two checksum
verification failure cases. We need to set the return values to zero
as failure like ext4_dirent_csum_verify() returning zero when failing
to find a checksum dirent at the tail.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NYoungjin Gil <youngjin.gil@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When filesystem is corrupted in the right way, it can happen
ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we
subsequently remove inode from the in-memory orphan list. However this
deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we
leave i_orphan list_head with a stale content. Later we can look at this
content causing list corruption, oops, or other issues. The reported
trace looked like:

WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100()
list_del corruption, 0000000061c1d6e0->next is LIST_POISON1
0000000000100100)
CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250
Stack:
 60462947 62219960 602ede24 62219960
 602ede24 603ca293 622198f0 602f02eb
 62219950 6002c12c 62219900 601b4d6b
Call Trace:
 [<6005769c>] ? vprintk_emit+0x2dc/0x5c0
 [<602ede24>] ? printk+0x0/0x94
 [<600190bc>] show_stack+0xdc/0x1a0
 [<602ede24>] ? printk+0x0/0x94
 [<602ede24>] ? printk+0x0/0x94
 [<602f02eb>] dump_stack+0x2a/0x2c
 [<6002c12c>] warn_slowpath_common+0x9c/0xf0
 [<601b4d6b>] ? __list_del_entry+0x6b/0x100
 [<6002c254>] warn_slowpath_fmt+0x94/0xa0
 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0
 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0
 [<60023ebf>] ? set_signals+0x3f/0x50
 [<600a205a>] ? kmem_cache_free+0x10a/0x180
 [<602f4e88>] ? mutex_lock+0x18/0x30
 [<601b4d6b>] __list_del_entry+0x6b/0x100
 [<601177ec>] ext4_orphan_del+0x22c/0x2f0
 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0
 [<6010b973>] ? ext4_truncate+0x383/0x390
 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0
 [<6001bb50>] ? copy_from_user+0x0/0xb0
 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0
 [<60072c4f>] generic_perform_write+0xaf/0x1e0
 [<600c4166>] ? file_update_time+0x46/0x110
 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0
 [<6010030f>] ext4_file_write_iter+0x15f/0x470
 [<60094e10>] ? unlink_file_vma+0x0/0x70
 [<6009b180>] ? unlink_anon_vmas+0x0/0x260
 [<6008f169>] ? free_pgtables+0xb9/0x100
 [<600a6030>] __vfs_write+0xb0/0x130
 [<600a61d5>] vfs_write+0xa5/0x170
 [<600a63d6>] SyS_write+0x56/0xe0
 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0
 [<6001b698>] handle_syscall+0x68/0x90
 [<6002633d>] userspace+0x4fd/0x600
 [<6002274f>] ? save_registers+0x1f/0x40
 [<60028bd7>] ? arch_prctl+0x177/0x1b0
 [<60017bd5>] fork_handler+0x85/0x90

Fix the problem by using list_del_init() as we always should with
i_orphan list.

CC: stable@vger.kernel.org
Reported-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Messages passed to ext4_warning() or ext4_error() don't need trailing
newlines, because these function add the newlines themselves.
Signed-off-by: NJakub Wilk <jwilk@jwilk.net>

If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations.  Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().

This was reverted earlier due to a typo in the original commit where I
experimented with using signal_pending() instead of
fatal_signal_pending().  The test was in the wrong place if we were
going to return signal_pending() since we would end up returning
duplicant entries.  See 9f2394c9 for a more detailed explanation.

Added fix as suggested by Linus to check for signal_pending() in
in the filldir() functions.
Reported-by: NBenjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This reverts commit 1028b55b.

It's broken: it makes ext4 return an error at an invalid point, causing
the readdir wrappers to write the the position of the last successful
directory entry into the position field, which means that the next
readdir will now return that last successful entry _again_.

You can only return fatal errors (that terminate the readdir directory
walk) from within the filesystem readdir functions, the "normal" errors
(that happen when the readdir buffer fills up, for example) happen in
the iterorator where we know the position of the actual failing entry.

I do have a very different patch that does the "signal_pending()"
handling inside the iterator function where it is allowable, but while
that one passes all the sanity checks, I screwed up something like four
times while emailing it out, so I'm not going to commit it today.

So my track record is not good enough, and the stars will have to align
better before that one gets committed.  And it would be good to get some
review too, of course, since celestial alignments are always an iffy
debugging model.

IOW, let's just revert the commit that caused the problem for now.
Reported-by: NGreg Thelen <gthelen@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... and neither can ever be NULL
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations.  Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().
Reported-by: NBenjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In the case where the per-file key for the directory is cached, but
root does not have access to the key needed to derive the per-file key
for the files in the directory, we allow the lookup to succeed, so
that lstat(2) and unlink(2) can suceed.  However, if a program tries
to open the file, it will get an ENOKEY error.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Add a validation check for dentries for encrypted directory to make
sure we're not caching stale data after a key has been added or removed.

Also check to make sure that status of the encryption key is updated
when readdir(2) is executed.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NLi Xi <lixi@ddn.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Reviewed-by: NJan Kara <jack@suse.cz>

A number of functions include ext4_add_dx_entry, make_indexed_dir,
etc. are being passed a dentry even though the only thing they use is
the containing parent.  We can shrink the code size slightly by making
this replacement.  This will also be useful in cases where we don't
have a dentry as the argument to the directory entry insert functions.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.

new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases.  page_follow_link_light()
instrumented to yell about anything missed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

As new_valid_dev always returns 1, so !new_valid_dev check is not
needed, remove it.
Signed-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros.  Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NJeff Layton <jlayton@poochiereds.net>
Reviewed-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NSteve French <smfrench@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We should release "sd" before returning.

Fixes: 0fa12ad1b285 ('ext4: Handle error from dquot_initialize()')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJan Kara <jack@suse.com>

dquot_initialize() can now return error. Handle it where possible.
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJan Kara <jack@suse.com>

In order to prevent quota block tracking to be inaccurate when
ext4_quota_write() fails with ENOSPC, we make two changes.  The quota
file can now use the reserved block (since the quota file is arguably
file system metadata), and ext4_quota_write() now uses
ext4_should_retry_alloc() to retry the block allocation after a commit
has completed and released some blocks for allocation.

This fixes failures of xfstests generic/270:

Quota error (device vdc): write_blk: dquota write failed
Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Several ext4_warning() messages in the directory handling code do not
report the inode number of the (potentially corrupt) directory where a
problem is seen, and others report this in an ad-hoc manner.  Add an
ext4_warning_inode() helper to print the inode number and command name
consistent with ext4_error_inode().

Consolidate the place in ext4.h that these macros are defined.

Clean up some other directory error and warning messages to print the
calling function name.

Minor code style fixes in nearby lines.
Signed-off-by: NAndreas Dilger <adilger@dilger.ca>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Previously we were taking the required padding when allocating space
for the on-disk symlink.  This caused a buffer overrun which could
trigger a krenel crash when running fsstress.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Thanks to Chao Yu <chao2.yu@samsung.com> for pointing out the need for
this check.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Factor out calls to ext4_inherit_context() and move them to
__ext4_new_inode(); this fixes a problem where ext4_tmpfile() wasn't
calling calling ext4_inherit_context(), so the temporary file wasn't
getting protected.  Since the blocks for the tmpfile could end up on
disk, they really should be protected if the tmpfile is created within
the context of an encrypted directory.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page.  Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.

Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This is a pretty massive patch which does a number of different things:

1) The per-inode encryption information is now stored in an allocated
   data structure, ext4_crypt_info, instead of directly in the node.
   This reduces the size usage of an in-memory inode when it is not
   using encryption.

2) We drop the ext4_fname_crypto_ctx entirely, and use the per-inode
   encryption structure instead.  This remove an unnecessary memory
   allocation and free for the fname_crypto_ctx as well as allowing us
   to reuse the ctfm in a directory for multiple lookups and file
   creations.

3) We also cache the inode's policy information in the ext4_crypt_info
   structure so we don't have to continually read it out of the
   extended attributes.

4) We now keep the keyring key in the inode's encryption structure
   instead of releasing it after we are done using it to derive the
   per-inode key.  This allows us to test to see if the key has been
   revoked; if it has, we prevent the use of the derived key and free
   it.

5) When an inode is released (or when the derived key is freed), we
   will use memset_explicit() to zero out the derived key, so it's not
   left hanging around in memory.  This implies that when a user logs
   out, it is important to first revoke the key, and then unlink it,
   and then finally, to use "echo 3 > /proc/sys/vm/drop_caches" to
   release any decrypted pages and dcache entries from the system
   caches.

6) All this, and we also shrink the number of lines of code by around
   100.  :-)
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Encrypt the filename as soon it is passed in by the user.  This avoids
our needing to encrypt the filename 2 or 3 times while in the process
of creating a filename.

Similarly, when looking up a directory entry, encrypt the filename
early, or if the encryption key is not available, base-64 decode the
file syystem so that the hash value and the last 16 bytes of the
encrypted filename is available in the new struct ext4_filename data
structure.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

for fast symlinks only, of course...
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Avoid using SHA-1 when calculating the user-visible filename when the
encryption key is available, and avoid decrypting lots of filenames
when searching for a directory entry in a directory block.

Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Also add the test dummy encryption mode flag so we can more easily
test the encryption patches using xfstests.
Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Signed-off-by: NUday Savagaonkar <savagaon@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The original dax patchset split the ext2/4_file_operations because of the
two NULL splice_read/splice_write in the dax case.

In the vfs if splice_read/splice_write are NULL we then call
default_splice_read/write.

What we do here is make generic_file_splice_read aware of IS_DAX() so the
original ext2/4_file_operations can be used as is.

For write it appears that iter_file_splice_write is just fine.  It uses
the regular f_op->write(file,..) or new_sync_write(file, ...).
Signed-off-by: NBoaz Harrosh <boaz@plexistor.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Modifies htree_dirblock_to_tree, dx_make_map, ext4_match search_dir,
and ext4_find_dest_de to support fname crypto.  Filename encryption
feature is not yet enabled at this patch.
Signed-off-by: NUday Savagaonkar <savagaon@google.com>
Signed-off-by: NIldar Muslukhov <ildarm@google.com>
Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>