Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 3月, 2015 4 次提交
    • S
      drm/i915/skl: Read sink supported rates from edp panel · fc0f8e25
      由 Sonika Jindal 提交于 
      v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh).
v3: Reading dpcd's supported link rates tables based upon edp version in the
same patch.
v4: Move version check under is_edp (Satheesh)
v5: Using le16 for rates, some naming, and removing nested if block (Ville)
v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES
(Ville)
v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it
v8: Checking return value of intel_dp_dpcd_read_wake() (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      fc0f8e25
    • P
      drm/i915: add frontbuffer tracking to FBC · dbef0f15
      由 Paulo Zanoni 提交于 
      Kill the blt/render tracking we currently have and use the frontbuffer
tracking infrastructure.

Don't enable things by default yet.

v2: (Rodrigo) Fix small conflict on rebase and typo at subject.
v3: (Paulo) Rebase on RENDER_CS change.
v4: (Paulo) Rebase.
v5: (Paulo) Simplify: flushes don't have origin (Daniel).
            Also rebase due to patch order changes.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      dbef0f15
    • P
      drm/i915: pass which operation triggered the frontbuffer tracking · a4001f1b
      由 Paulo Zanoni 提交于 
      We want to port FBC to the frontbuffer tracking infrastructure, but
for that we need to know what caused the object invalidation so
we can react accordingly: CPU mmaps need manual, GTT mmaps and
flips don't need handling and ring rendering needs nukes.

v2: - s/ORIGIN_RENDER/ORIGIN_CS/ (Daniel, Rodrigo)
    - Fix copy/pasted wrong documentation
    - Rebase
v3: - Rebase
v4: - Don't pass the operation to flushes (Daniel).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      a4001f1b
    • M
      drm/i915: Kill intel_crtc->cursor_{width, height} (v2) · 3dd512fb
      由 Matt Roper 提交于 
      The cursor size fields in intel_crtc just duplicate the data from
cursor->state.crtc_{w,h} so we don't need them any more.  Worse, their
use in the watermark code actually introduces a subtle bug since they
don't get updated to mirror the state values until the plane commit
stage, which is *after* we've already used them to calculate new
watermark values.  This happens because we had to move watermark updates
slightly earlier (outside vblank evasion) in commit

        commit 32b7eeec
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Wed Dec 24 07:59:06 2014 -0800

            drm/i915: Refactor work that can sleep out of commit (v7)

Dropping the intel_crtc fields and just using the state values (which
are properly updated by the time watermark updates happen) should solve
the problem.

Aside from the actual removal of the struct fields (which are formatted
in a way that I couldn't figure out how to match in Coccinelle), the
rest of this patch was generated via the following semantic patch:

        // Drop assignment
        @@
        struct intel_crtc *C;
        struct drm_plane_state S;
        @@
        (
        - C->cursor_width = S.crtc_w;
        |
        - C->cursor_height = S.crtc_h;
        )

        // Replace usage
        @@
        struct intel_crtc *C;
        expression E;
        @@
        (
        - C->cursor_width
        + C->base.cursor->state->crtc_w
        |
        - C->cursor_height
        + C->base.cursor->state->crtc_h
        |
        - to_intel_crtc(E)->cursor_width
        + E->cursor->state->crtc_w
        |
        - to_intel_crtc(E)->cursor_height
        + E->cursor->state->crtc_h
        )

v2: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joe Konno <joe.konno@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89346Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      3dd512fb
  3. 05 3月, 2015 1 次提交
  5. 28 2月, 2015 2 次提交
  7. 24 2月, 2015 1 次提交
    • R
      drm/i915: Add support for DRRS in intel_dp_set_m_n · fe3cd48d
      由 Ramalingam C 提交于 
      Till Gen 7 we have two sets of M_N registers, but Gen 8 onwards
we have only one M_N register set. To support DRRS on both scenarios
a input parameter to intel_dp_set_m_n is added.

In case of DRRS, When platform provides two set of M_N registers for dp,
we can program them with two different dividers and switch between them.
But when only one such register set is provided, we have to program
the required divider M_N value on that registers itself.

Two enum members M1_N1 and M2_N2 are defined to represent the above
scenarios.

M1_N1        :	Program dp_m_n on M1_N1 registers
			dp_m2_n2 on M2_N2 registers (If supported)

M2_N2        :	Program dp_m2_n2 on M1_N1 registers
			M2_N2 registers are not supported
Signed-off-by: NRamalingam C <ramalingam.c@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      fe3cd48d
  9. 14 2月, 2015 7 次提交
  11. 27 1月, 2015 19 次提交
  13. 13 1月, 2015 5 次提交
    • M
      drm/i915: Drop unused position fields (v2) · 53a366b9
      由 Matt Roper 提交于 
      The userspace-requested plane coordinates are now always available via
plane->state.base (and the i915-adjusted values are stored in
plane->state), so we no longer use the coordinate fields in intel_plane
and can drop them.

Also, note that the error case for pageflip calls update_plane() to
program the values from plane->state; it's simpler to just call
intel_plane_restore() which does the same thing.

v2: Replace manual update_plane() with intel_plane_restore() in pageflip
    error handler.

Reviewed-by(v1): Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      53a366b9
    • M
      drm/i915: Move to atomic plane helpers (v9) · ea2c67bb
      由 Matt Roper 提交于 
      Switch plane handling to use the atomic plane helpers.  This means that
rather than provide our own implementations of .update_plane() and
.disable_plane(), we expose the lower-level check/prepare/commit/cleanup
entrypoints and let the DRM core implement update/disable for us using
those entrypoints.

The other main change that falls out of this patch is that our
drm_plane's will now always have a valid plane->state that contains the
relevant plane state (initial state is allocated at plane creation).
The base drm_plane_state pointed to holds the requested source/dest
coordinates, and the subclassed intel_plane_state holds the adjusted
values that our driver actually uses.

v2:
 - Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel)
 - Fix a copy/paste comment mistake (Bob)

v3:
 - Use prepare/cleanup functions that we've already factored out
 - Use newly refactored pre_commit/commit/post_commit to avoid sleeping
   during vblank evasion

v4:
 - Rebase to latest di-nightly requires adding an 'old_state' parameter
   to atomic_update;

v5:
 - Must have botched a rebase somewhere and lost some work.  Restore
   state 'dirty' flag to let begin/end code know which planes to
   run the pre_commit/post_commit hooks for.  This would have actually
   shown up as broken in the next commit rather than this one.

v6:
 - Squash kerneldoc patch into this one.
 - Previous patches have now already taken care of most of the
   infrastructure that used to be in this patch.  All we're adding here
   now is some thin wrappers.

v7:
 - Check return of intel_plane_duplicate_state() for allocation
   failures.

v8:
 - Drop unused drm_plane_state -> intel_plane_state cast.  (Ander)
 - Squash in actual transition to plane helpers.  Significant
   refactoring earlier in the patchset has made the combined
   prep+transition much easier to swallow than it was in earlier
   iterations. (Ander)

v9:
 - s/track_fbs/disabled_planes/ in the atomic crtc flags.  The only fb's
   we need to update frontbuffer tracking for are those on a plane about
   to be disabled (since the atomic helpers never call prepare_fb() when
   disabling a plane), so the new name more accurately describes what
   we're actually tracking.

Testcase: igt/kms_plane
Testcase: igt/kms_universal_plane
Testcase: igt/kms_cursor_crc
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      ea2c67bb
    • M
      drm/i915: Clarify sprite plane function names (v4) · 4a3b8769
      由 Matt Roper 提交于 
      A few of the sprite-related function names in i915 are very similar
(e.g., intel_enable_planes() vs intel_crtc_enable_planes()) and don't
make it clear whether they only operate on sprite planes, or whether
they also apply to all universal plane types.  Rename a few functions to
be more consistent with our function naming for primary/cursor planes or
to clarify that they apply specifically to sprite planes:

 - s/intel_disable_planes/intel_disable_sprite_planes/
 - s/intel_enable_planes/intel_enable_sprite_planes/

Also, drop the sprite-specific intel_destroy_plane() and just use
the type-agnostic intel_plane_destroy() function.  The extra 'disable'
call that intel_destroy_plane() did is unnecessary since the plane will
already be disabled due to framebuffer destruction by the point it gets
called.

v2: Earlier consolidation patches have reduced the number of functions
    we need to rename here.

v3: Also rename intel_plane_funcs vtable to intel_sprite_plane_funcs
    for consistency with primary/cursor.  (Ander)

v4: Convert comment for intel_plane_destroy() to kerneldoc now that it
    is no longer a static function.  (Ander)

Reviewed-by(v1): Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      4a3b8769
    • M
      drm/i915: Move vblank evasion to commit (v4) · c34c9ee4
      由 Matt Roper 提交于 
      Move the vblank evasion up from the low-level, hw-specific
update_plane() handlers to the general plane commit operation.
Everything inside commit should now be non-sleeping, so this brings us
closer to how vblank evasion will behave once we move over to atomic.

v2:
 - Restore lost intel_crtc->active check on vblank evasion

v3:
 - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
   with an intel_crtc->active test; it turns out assert_pipe_enabled()
   grabs some mutexes and can sleep, which we can't do with interrupts
   disabled.

v4:
 - Equivalent to v2; v3 change is now squashed into an earlier patch
   of the series.  (Ander).
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      c34c9ee4
    • M
      drm/i915: Refactor work that can sleep out of commit (v7) · 32b7eeec
      由 Matt Roper 提交于 
      Once we integrate our work into the atomic pipeline, plane commit
operations will need to happen with interrupts disabled, due to vblank
evasion.  Our commit functions today include sleepable work, so those
operations need to be split out and run either before or after the
atomic register programming.

The solution here calculates which of those operations will need to be
performed during the 'check' phase and sets flags in an intel_crtc
sub-struct.  New intel_begin_crtc_commit() and
intel_finish_crtc_commit() functions are added before and after the
actual register programming; these will eventually be called from the
atomic plane helper's .atomic_begin() and .atomic_end() entrypoints.

v2: Fix broken sprite code split

v3: Make the pre/post commit work crtc-based to match how we eventually
    want this to be called from the atomic plane helpers.

v4: Some platforms that haven't had their watermark code reworked were
    waiting for vblank, then calling update_sprite_watermarks in their
    platform-specific disable code.  These also need to be flagged out
    of the critical section.

v5: Sprite plane test for primary show/hide should just set the flag to
    wait for pending flips, not actually perform the wait.  (Ander)

v6:
 - Rebase onto latest di-nightly; picks up an important runtime PM fix.
 - Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander)
 - Use wait_for_flips flag for primary plane update rather than
   performing the wait in the check routine.
 - Added kerneldoc to pre_disable/post_enable functions that are no
   longer static.  (Ander)
 - Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
   with an intel_crtc->active test; it turns out assert_pipe_enabled()
   grabs some mutexes and can sleep, which we can't do with interrupts
   disabled.

v7:
 - Check for fb != NULL when deciding whether the sprite plane hides the
   primary plane during a sprite update.  (PRTS)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      32b7eeec
  15. 12 1月, 2015 1 次提交