"extern inline" will have different semantics with gcc 4.3.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

tuner-simple is the only sub-driver that uses last_div, so we 
can free up two bytes of memory for all other tuners, by moving 
this into tuner-simple's private data area.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some lines later filp->private_data is initialized to dev again.
Since there are some checks that might fail in the mean time
keep the later version.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Correctly attribute the origin of the driver to Kazuhiko 
Kawakami.

It took some time to get the S-O-B line from the original 
tvaudio patch author, but here it is.
Signed-off-by: NKazuhiko Kawakami <kazz-0@mail.goo.ne.jp>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When changing channels the audio has to be muted. This is done 
by calling CX2341X_ENC_MUTE_AUDIO and by muted the audio input. 
The latter is not necessary and is now removed.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Audio muting for the tuner input was implemented by stopping the 
audio microcontroller and restarting it on unmute. However, it 
appears that this method can actually crash the audio firmware. 
It's rare and seems to happen with NTSC only.

It has been reimplemented by setting to volume to 0. In addition, the
reporting of the mute state has been improved as well: it used to be
impossible to detect whether the audio was muted by the user or if it
was muted due to the microcontroller trying to detect the audio
standard. This is now clearly stated.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Split Club3D card from Yuan PG600-2, GotView PCI DVD Lite
  (different composite input)
- Add AVerTV MCE 116 Plus (M116) card
- Allow Xceive cards to be used without Xceive support
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support to optionally reset the IR and/or the video digitizer.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Resetting without reloading the firmware is not enough. Sometimes the
firmware is 'stuck' and needs to be reloaded.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Restore unlock of cinergyt2->wq_sem, was deleted by accident.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

With the addition of these ioctls, I'm able to watch TV with a 32-bit version
of tvtime on x86_64.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Since videobuf_waiton is called with intr=1, it can return -EINTR and therefore
err may be non-zero. This happens when the system goes into the standby state.

Without the BUG() occurring, there's no problem with standby mode while DVB
is being used.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Interrupt processing fixed: First handle interrupt, then acknowledge it.
Otherwise the same interrupt might occur twice.
Cleaned-up i2c interrupt handler and i2c error messages.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The calculation of frequency limits ignored tuner-specific frequency limits.
Range checks and GET_INFO ioctl updated accordingly.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The min frequencies of the DVB-C frontends are wrong. 

In Europe, the center frequency of the lowest channel is 50.5MHz and not 
51MHz. All known cards with the stv0297/tda0002x/ves1820 frontend are 
able to tune to this frequency.

I've changed the range to the lowest channel - 1/2 bandwidth and the 
highest channel + 1/2 bandwidth. For the design of the dvb driver, the 
frequency ranges must be part of the tuner and not of the frontend 
itself. The same frontend may be used for different tuners. 

The attached patch does only fix the ranges and not the design.
Signed-off-by: NHartmut Birr <e9hack@googlemail.com>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Looks like memset() is zeroing wrong nr of bytes.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Looks like memset() is zeroing wrong nr of bytes.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Looks like memset() is zeroing wrong nr of bytes.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The TDA8083 supports a symbol rate from 12..30 MSym/s.
The Grundig 29504-451 tuner uses the TDA8060 down-converter,
which has a frequency range from 920..2200MHz.
Thanks-to: Lars Buerding <lindvb@metatux.net>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add radio support for the Thomson DTT7612 tuner.

This tuner uses a different 1st intermediate frequency than the other radio
tuners supported (a lot of NTSC radio tuners probably need this change too).

Add a new tuner-simple parameter, radio_if.  It selects the 1st IF used for
radio reception.  The radio frequency setting code in tuner-simple now uses
this field, instead of a special case select() block for each tuner with radio
support.

The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1
in tuner-types.c.

The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and
fm_gain_normal = 1.

Add some defines for tda9887 bits that control IF setting in radio mode.

Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz
radio IF.

Fix the way tda9887 radio options work.  The driver was modifying the default
radio mode config templates based on the TDA9887_XXXX flags.  This means that
_all_ tuners would get the same settings.  If you had a one tuner than used
TDA9887_GAIN_NORMAL and one that didn't, both would get the setting.  Now the
tda9987 driver just checks if tuner mode is radio and then applies the config
settings directly to the data being sent, just like how all the TV mode
settings already work.

The PLL setting math is made a little more accurate.

And a grammar error in a printk is fixed.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add the advanced debug functions to the radio videodev template.  One could
already use them from the video and vbi devices.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If a card driver is compiled into the kernel and mt2131 or s5h1409 are
compiled as modules, the kernel won't link.

A compiled in driver can't use a module, so in this case the mt2131 or s5h1409
are effectively disabled w.r.t the compiled in driver and the stub attach
function should be used.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

After some tedious work with a logic probe and a magnifying glass, I've
determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz
IF output on pin 12 and the FM 10.7MHz If output on pin 11.  GPIO 2 is used to
switch the card's analog sound output from from the analog input connector to
the CX23883's audio DACs.

So, in radio mode GPIO2 = 1 and GPIO7 = 0.

Add some comments about how the HD-3000's GPIOs are connected.

Delete the vmux setting for the radio, as vmux doesn't apply to radio mode.
Also delete the lines setting unused gpio words to zero; it's not necessary as
0 is the default value for uninitialized fields.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

In the current driver, the field order is global. As soon as it's changed it
takes immediate effect. This is a problem when the video changes order mid
stream. Although it mostly works okay, the video may judder / flicker.

This patch attaches the field order to the frame, so that any buffered frames
will not be displayed until the correct field. In the event that the field
order is changed mid stream, the driver will ensure that the previous frame
is displayed for a minimum of 3 fields. These are the two original fields the
frame should have occupied, plus the one extra since the new frame still has
to wait for the correct field.
Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The yuv output code always compares the new frame position & size with those
of the previous frame. If they are different, a flag is set to request the
yuv output registers be updated when the new frame is displayed.

If the incoming frames are delivered too fast, exhausting the buffers, the
most recent frame already buffered will be discarded. Unfortunately, any
update request will also be discarded. If the new frame matches the size &
position of the now discarded frame, the yuv registers are not flagged for
update & will remain in their old state.

This patch preserves the register update flag in the event that a frame is
dropped.
Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Framebuffer timings are currently locked to the video format in use when the
module is loaded. If the video format is then changed, the timings returned
by the framebuffer will be for the original format.

This patch ensures that the timings returned reflect the current video format.
Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When the video standard is changed, there's no guarantee the framebuffer
dimensions are still legal. The yuv output code uses these dimensions to
calculate the size & position for the video overlay. If the framebuffer
dimensions are now illegal, the output may exceed the vertical limit of the
display, causing distortion.

This patch adds an additional check to ensure the output doesn't exceed
the limits for the current video standard, cropping if required.
Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The Coverity checker spotted that we have already oops'ed if "fe" was NULL.

Since "fe" being NULL seems impossible at this point this patch removes
the NULL check.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The new firmware returns the data of the REQUEST_POLL_RC request in
reversed order. The default is RC5, but it can be adjusted using a
module parameter.
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Matt Doran I found that there the module parameter description 
was not OK.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

line-breaks in dib0700-remote-query function fixed.
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Forgot to initialize the timf_default field.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

In some areas in the world the broadcasters are not using the same
cellid for each transmitter in a SFN. The DiBcom has problems with
that setup. The module parameter buggy_sfn_workaround makes it re-usable.
Signed-off-by: NMatt Doran <matt.doran@papercut.biz>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix for size of remote control keys in DiB0700.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support Compro VideoMate 500 with DiB7000PC. Another design of 
Compro uses the DiB7000PC and it has new USB ids.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org> 
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Copied from drivers/media/dvb/dvb-usb/nova-t-usb2.c
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds remote control support for the Hauppauge Nova-T 500 
using the same keys as for STK7700PD.
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>