提交 · fbb6b3a4ac0ccf12a97c98881d9d873d6dc26fe5 · openeuler / raspberrypi-kernel

15 2月, 2006 4 次提交

R
[MIPS] Get rid of kludgery needed to keep stdargs of old compilers working. · fbb6b3a4
由 Ralf Baechle 提交于 2月 10, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
fbb6b3a4

[MIPS] Add protected_blast_icache_range, blast_icache_range, etc. · 41700e73

由 Atsushi Nemoto 提交于 2月 10, 2006

    
Add blast_xxx_range(), protected_blast_xxx_range() etc. for common
use.  They are built by __BUILD_BLAST_CACHE_RANGE().
Use protected_cache_op() macro for various protected_ routines.
Output code should be logically same.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

41700e73

[MIPS] Rewrite get_wchan and its helper functions using kallsyms_lookup. · 63077519

由 Atsushi Nemoto 提交于 2月 08, 2006

    
Implement get_wchan() and frame_info_init() using kallsyms_lookup().
This fixes problem with static sched/lock functions and mfinfo[]
maintenance issue.  If CONFIG_KALLSYMS was disabled, get_wchan() just
returns thread_saved_pc() value.
    
Also unwind stackframe based on "addiu sp,-imm" analysis instead of
frame pointer.  This fixes problem with functions compiled without
-fomit-frame-pointer.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

63077519

R
[MIPS] Remove commented out function prom_build_cpu_map. · 1bdfd0d9
由 Ralf Baechle 提交于 2月 09, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
1bdfd0d9

13 2月, 2006 1 次提交

[PATCH] MIPS 32bit machines need fstatat64 support. · 326a6257

由 Yoichi Yuasa 提交于 2月 13, 2006

As noted by Jan Dittmer <jdi@l4x.org>
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

326a6257

09 2月, 2006 4 次提交
- A
  [MIPS] Sparse: Add __user tags to syscall.c · be6e518b
  由 Atsushi Nemoto 提交于 2月 08, 2006
```
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---
```
  be6e518b
- R
  [MIPS] Wire up new syscalls. · 72bf8914
  由 Ralf Baechle 提交于 2月 08, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---
```
  72bf8914
- R
  [MIPS] Make do_signal return void. · 40ac5d47
  由 Ralf Baechle 提交于 2月 08, 2006
```
    
It's return value is ignored everywhere.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---
```
  40ac5d47
- R
  [MIPS] Add support for TIF_RESTORE_SIGMASK. · 7b3e2fc8
  由 Ralf Baechle 提交于 2月 08, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---
```
  7b3e2fc8
07 2月, 2006 31 次提交

[MIPS] Clear ST0_RE on bootup. · b38c7399

由 Ralf Baechle 提交于 2月 07, 2006

    
The reset state is undefined and some firmware doesn't clear this bit
possibly resulting in crashes on entry into userland.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

b38c7399

[MIPS] TX49x7: Fix reporting of the CPU name and PCI clock · f09678af

由 Sergei Shtylylov 提交于 2月 04, 2006

I've noticed that PCI clock was incorrectly reported as 66 MHz while being
mere 33 MHz on RBTX4937 board -- this was due to the different encoding of
the PCI divisor field in CCFG register between TX4927 and TX4937 chips...

Also, RBTX49x7 was printed out as a CPU name (e.g., "CPU is RBTX4937");
and some debug printk() were duplicating each other...
Signed-off-by: NKonstantin Baydarov <kbaidarov@ru.mvista.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

f09678af

[MIPS] Fix linker script to work for non-4K page size. · dbee90b7

由 Ralf Baechle 提交于 2月 02, 2006

Very much to my surprise Fuxin Zhang reports this is all it takes to get
the kernel to work for page sizes larger than 4kB. This also paves the
way for support for the R6000 and R8000 which don't support 4kB page size.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

dbee90b7

R
[MIPS] Oprofile: Support for 34K UP kernels. · fcfd980c
由 Ralf Baechle 提交于 2月 01, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
fcfd980c

[MIPS] Fix dump_tlb.c warning and cleanup. · d1e30a63

由 Atsushi Nemoto 提交于 2月 02, 2006

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

d1e30a63

[MIPS] Fix minor sparse warnings · 5665a0ac

由 Atsushi Nemoto 提交于 2月 02, 2006

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

5665a0ac

A
[MIPS] Sparse: Add some __user tags to signal functions. · 9bbf28a3
由 Atsushi Nemoto 提交于 2月 01, 2006
```
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
9bbf28a3
R
[MIPS] Shrink Qemu configuration to the bare minimum that is need and tested. · 5be0f654
由 Ralf Baechle 提交于 1月 31, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
5be0f654

[MIPS] Support /proc/kcore for MIPS · 3d503753

由 Daniel Jacobowitz 提交于 1月 20, 2005

    
I'm pretty sure that the CKSEG0 bits are wrong, but I did need to
cover that region - because the SB-1 kernel links at 0xffffffff80100000
or so, disassembly and printing static variables don't work unless the
debugger can read that region.
Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

3d503753

[MIPS] IP22: Fix serial console detection · e9feeb20

由 Ralf Baechle 提交于 1月 30, 2006

    
From: Kaj-Michael Lang <milang@tal.org>
    
In ip22-setup.c the checks for serial/graphics console logic does
not check if ARCS console=g but the machine is using serial console, as
it does if no keyboard is attached.
    
This patch adds a check if ConsoleOut is serial. There might also be
support for other graphics than Newport soon...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

e9feeb20

[MIPS] ieee754[sd]p_neg workaround · c5033d78

由 Atsushi Nemoto 提交于 1月 02, 2006

    
It looks glibc's pow() assumes an unary '-' operation for any number
(including NaNs) always inverts its sign bit (though IEEE754 does not
specify the sign bit for NaNs).  This patch make the kernel math-emu
emulates real MIPS neg.[ds] instruction.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

c5033d78

[MIPS] Remove wrong __user tags. · d4264f18

由 Atsushi Nemoto 提交于 1月 29, 2006

    
This fixes sparse warnings 'dereference of noderef expression'.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

d4264f18

[MIPS] Remove commented out code to add -mmad for Nevada. · 75bdb426

由 Ralf Baechle 提交于 1月 30, 2006

    
Adding -mmad is not usable since over half a decade in gcc and when
fixed the proper -march option values should enable the use of the
mad, madu and mul instructions of the R5500, RM5200, RM7000 and RM9000
families.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

75bdb426

P
[MIPS] Fix Cobalt PCI cache line sizes · 52378445
由 Peter Horton 提交于 1月 29, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
52378445
A
[MIPS] Sparse: Add _MIPS_SZINT and _MIPS_ISA to CHECKFLAGS to fix sparse warnings. · c315a2b5
由 Atsushi Nemoto 提交于 1月 29, 2006
```
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
c315a2b5
A
[MIPS] Sparse: Fix some compiler/sparse warnings in ptrace32.c · 3055acb0
由 Atsushi Nemoto 提交于 1月 29, 2006
```
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
3055acb0

[MIPS] Reformat to 80 columns. · b6f7880b

由 Ralf Baechle 提交于 1月 29, 2006

    
Patch courtesy of Emily Postnews ;-)
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

b6f7880b

R
[MIPS] Sibyte: Make all setup functions __init. · 5ac71fd1
由 Ralf Baechle 提交于 1月 29, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
5ac71fd1
R
[MIPS] Get rid of CONFIG_SB1_PASS_1_WORKAROUNDS #ifdef crapola. · 010b853b
由 Ralf Baechle 提交于 1月 29, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
010b853b

[MIPS] Au1xx0: really set KSEG0 to uncached on reboot · 80730555

由 Sergei Shtylylov 提交于 1月 25, 2006

Fix a really old buglet in AMD Au1xx0 restart code: instead of
modifying the whole CP0 Config.K0 field to 010b (meaning KSEG0 uncached)
before flushing the caches and resetting a board, it only sets bit 1 of that
reg. which is effectively a NOP since Config.K0 == 011b as the kernel sets it
up (which is also its default value for Au1xx0).
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

80730555

[MIPS] SB1: Add oprofile support. · c03bc121

由 Mark Mason 提交于 1月 17, 2006

Signed-off-by: NMark Mason <mason@broadcom.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

c03bc121

M
[MIPS] BCM1480: Cleanup debug code left behind in the PCI driver. · 4c91cc57
由 Mark Mason 提交于 1月 17, 2006
```
Signed-off-by: NMark Mason <mason@broadcom.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
4c91cc57

[MIPS] BCM1125 PCI fixes · 80f834e6

由 Mark Mason 提交于 1月 17, 2006

    
Make BCM1125 targets to link again.
Signed-off-by: NMark Mason <mason@broadcom.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

80f834e6

R
[MIPS] Nevada support for SGI O2. · dd2f18fe
由 Ralf Baechle 提交于 1月 19, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
dd2f18fe
R
[MIPS] Rename include/asm-mips/cobalt to include/asm-mips/mach-cobalt. · 11ed6d5b
由 Ralf Baechle 提交于 1月 18, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
11ed6d5b
R
[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again. · fcdb27ad
由 Ralf Baechle 提交于 1月 18, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
fcdb27ad

[MIPS] Check function pointers are non-zero before calling. · 9414d362

由 Ralf Baechle 提交于 1月 17, 2006

    
Several boards don't initialize the pointers, so let's play safe.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

9414d362

[MIPS] Revert "mips: add pm_power_off" · a3305a88

由 Ralf Baechle 提交于 2月 03, 2006

    
pm_power_off duplicates the functionality of _machine_restart.
    
This reverts b142159f commit.

a3305a88

R
[MIPS] RTLX compile fixes. · a84c96e2
由 Ralf Baechle 提交于 1月 15, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
a84c96e2
R
[MIPS] Get rid of unnecessary prototypes. Fixes and optimizations for HZ > 100. · 71baa1a5
由 Ralf Baechle 提交于 1月 15, 2006
```
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
71baa1a5
R
[MIPS] Remove stray .set mips3 resulting in 64-bit instruction in 32-bit kernels. · 4f0638ba
由 Ralf Baechle 提交于 1月 09, 2006
```
    
Only the NMI handler was affected so this is a low impact bug.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
```
4f0638ba