With the lock validator we detect mutex deadlocks (and more), the mutex
deadlock checking code is both redundant and slower.  So remove it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cleanup: remove unused DEBUG_BUG_ON() defines.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Rename DEBUG_WARN_ON() to the less generic DEBUG_LOCKS_WARN_ON() name, so that
it's clear that this is a lock-debugging internal mechanism.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

RWSEM_DEBUG used to be a printk based 'tracing' facility, probably used for
very early prototypes of the rwsem code.  Remove it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up rwsems.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

lockdep needs to have the waitqueue lock initialized for on-stack waitqueues
implicitly initialized by DECLARE_COMPLETION().  Introduce the API.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce local_irq_enable_in_hardirq() API.  It is currently aliased to
local_irq_enable(), hence has no functional effects.

This API will be used by lockdep, but even without lockdep this will better
document places in the kernel where a hardirq context enables hardirqs.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

lockdep wants to use the disable_irq()/enable_irq() prototypes before they are
provied by the platform's asm/irq.h.  So move them out of the
CONFIG_GENERIC_HARDIRQS define - all architectures have a common prototype for
this anyway.

Add special lockdep variants of irq line disabling/enabling.

These should be used for locking constructs that know that a particular irq
context which is disabled, and which is the only irq-context user of a lock,
that it's safe to take the lock in the irq-disabled section without disabling
hardirqs.

[akpm@osdl.org: build fix]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the per_cpu_offset() generic method. (used by the lock validator)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide a common print_ip_sym() function that prints the passed instruction
pointer as well as the symbol belonging to it.  Avoids adding a bunch of
#ifdef CONFIG_64BIT in order to get the printk format right on 32/64 bit
platforms.
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add is_module_address() method - to be used by lockdep.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

s390's console_init must enable interrupts, but early_boot_irqs_on() gets
called later.  To avoid problems move console_init() after local_irq_enable().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The lock validator triggered a number of bugs in the floppy driver, all
related to the floppy driver allocating and freeing irq and dma resources from
interrupt context.  The initial solution was to use schedule_work() to push
this into process context, but this caused further problems: for example the
current floppy driver in -mm2 is totally broken and all floppy commands time
out with an error.  (as reported by Barry K.  Nathan)

This patch tries another solution: simply get rid of all that dynamic IRQ and
DMA allocation/freeing.  I doubt it made much sense back in the heydays of
floppies (if two devices raced for DMA or IRQ resources then we didnt handle
those cases too gracefully anyway), and today it makes near zero sense.

So the new code does the simplest and most straightforward thing: allocate IRQ
and DMA resources at module init time, and free them at module removal time.
Dont try to release while the driver is operational.  This, besides making the
floppy driver functional again has an added bonus, floppy IRQ stats are
finally persistent and visible in /proc/interrupts:

  6: 63 XT-PIC-level floppy

Besides normal floppy IO i have also tested IO error handling, motor-off
timeouts, etc.  - and everything seems to be working fine.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sound/sparc/amd7930.c: In function 'amd7930_attach_common':
sound/sparc/amd7930.c:1040: warning: format '%08lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'

sound/sparc/cs4231.c:2043: warning: format '%016lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'

sound/sparc/dbri.c: In function 'dbri_attach':
sound/sparc/dbri.c:2650: warning: format '%016lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/input/serio/i8042-sparcio.h:91: error: '__mod_of_device_table' aliased to undefined symbol 'i8042_match'

Cc: Dmitry Torokhov <dtor_core@ameritech.net>
DESC
sparc: resource warning fix
EDESC
From: Andrew Morton <akpm@osdl.org>

sound/sparc/amd7930.c: In function 'amd7930_attach_common':
sound/sparc/amd7930.c:1040: warning: format '%08lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mark the static struct file_operations in drivers/char as const.  Making
them const prevents accidental bugs, and moves them to the .rodata section
so that they no longer do any false sharing; in addition with the proper
debug option they are then protected against corruption..

[akpm@osdl.org: build fix]
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a VT is newly allocated, the module reference count of the backend
will be incremented.  This should be balanced by a module_put() when this
VT is deallocated.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for Display Update Module and RGB framebuffer device on Philips
PNX4008 ARM board.
Signed-off-by: NGrigory Tolstolytkin <gtolstolytkin@ru.mvista.com>
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update MAINTAINERS with contact info for Mike Isely, the PVRUSB2
maintainer, while also adding the pvrusb2 mailing list and web site.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Martin says that I can add self to MAINTAINERS.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Martin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix check for bad address; use macro instead of open-coding two checks.

Taken from RHEL4 kernel update.

From: Ernie Petrides <petrides@redhat.com>

  For background, the BAD_ADDR() macro should return TRUE if the address is
  TASK_SIZE, because that's the lowest address that is *not* valid for
  user-space mappings.  The macro was correct in binfmt_aout.c but was wrong
  for the "equal to" case in binfmt_elf.c.  There were two in-line validations
  of user-space addresses in binfmt_elf.c, which have been appropriately
  converted to use the corrected BAD_ADDR() macro in the patch you posted
  yesterday.  Note that the size checks against TASK_SIZE are okay as coded.

  The additional changes that I propose are below.  These are in the error
  paths for bad ELF entry addresses once load_elf_binary() has already
  committed to exec'ing the new image (following the tearing down of the
  task's original address space).

  The 1st hunk deals with the interp-side of the outer "if".  There were two
  problems here.  The printk() should be removed because this path can be
  triggered at will by a bogus interpreter image created and used by a
  malicious user.  Further, the error code should not be ENOEXEC, because that
  causes the loop in search_binary_handler() to continue trying other exec
  handlers (twice, in fact).  But it's too late for this to work correctly,
  because the user address space has already been torn down, and an exec()
  failure cannot be returned to the user code because the code no longer
  exists.  The only recovery is to force a SIGSEGV, but it's best to terminate
  the search loop immediately.  I somewhat arbitrarily chose EINVAL as a
  fallback error code, but any error returned by load_elf_interp() will
  override that (but this value will never be seen by user-space).

  The 2nd hunk deals with the non-interp-side of the outer "if".  There were
  two problems here as well.  The SIGSEGV needs to be forced, because a prior
  sigaction() syscall might have set the associated disposition to SIG_IGN.
  And the ENOEXEC should be changed to EINVAL as described above.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NErnie Petrides <petrides@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It turns out that it is advantageous to leave a small portion of unmapped file
backed pages if all of a zone's pages (or almost all pages) are allocated and
so the page allocator has to go off-node.

This allows recently used file I/O buffers to stay on the node and
reduces the times that zone reclaim is invoked if file I/O occurs
when we run out of memory in a zone.

The problem is that zone reclaim runs too frequently when the page cache is
used for file I/O (read write and therefore unmapped pages!) alone and we have
almost all pages of the zone allocated.  Zone reclaim may remove 32 unmapped
pages.  File I/O will use these pages for the next read/write requests and the
unmapped pages increase.  After the zone has filled up again zone reclaim will
remove it again after only 32 pages.  This cycle is too inefficient and there
are potentially too many zone reclaim cycles.

With the 1% boundary we may still remove all unmapped pages for file I/O in
zone reclaim pass.  However.  it will take a large number of read and writes
to get back to 1% again where we trigger zone reclaim again.

The zone reclaim 2.6.16/17 does not show this behavior because we have a 30
second timeout.

[akpm@osdl.org: rename the /proc file and the variable]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PNP devices can use shared interrupts, so check to see whether we'll need
SA_SHIRQ for request_irq().

The builtin PDH UART on the HP rx8640 is an example of an ACPI/PNP device
that uses a shareable level-triggered, active-low interrupt.  The interrupt
can be shared in very large I/O configurations or by artificially lowering
IA64_DEF_LAST_DEVICE_VECTOR.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Li Shaohua <shaohua.li@intel.com>
Cc: Len Brown <len.brown@intel.com>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ACPI supplies a "shareable" indication, but PNPACPI ignores it.  If a PNP
device uses a shared interrupt, request_irq() fails because the PNP driver
can't tell whether to supply SA_SHIRQ.

This patch allows PNP drivers to test
    (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Li Shaohua <shaohua.li@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is needed to fix UML compilation given that alternatives_smp_module_add
and alternatives_smp_module_del are null inline functions if !CONFIG_SMP.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

reported by Jure Repinc:

> > http://bugzilla.kernel.org/show_bug.cgi?id=6773

> > checked out dmesg output and found the message
> >
> > ======================================================
> > [ BUG: hard-safe -> hard-unsafe lock order detected! ]
> > ------------------------------------------------------
> >
> > starting at line 660 of the dmesg.txt that I will attach.

The patch below should fix the deadlock, albeit I suspect it's not the
"right" fix; the right fix may well be to move the rx processing in bcm43xx
to softirq context.  [it's debatable, ipw2200 hit this exact same bug; at
some point it's better to bite the bullet and move this to the common layer
as my patch below does]

Make the nl_table_lock irq-safe; it's taken for read in various netlink
functions, including functions that several wireless drivers (ipw2200,
bcm43xx) want to call from hardirq context.

The deadlock was found by the lock validator.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Cc: jamal <hadi@cyberus.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Have a special version of print_symbol() for s390 which clears the most
significant bit of addr before calling __print_symbol().  This seems to be
better than checking/changing each place in the kernel that saves an
instruction pointer.

Without this the output would look like:

hardirqs last  enabled at (30907): [<80018c6a>] 0x80018c6a
hardirqs last disabled at (30908): [<8001e48c>] 0x8001e48c
softirqs last  enabled at (30904): [<8001dc96>] 0x8001dc96
softirqs last disabled at (30897): [<8001dc50>] 0x8001dc50

instead of this:

hardirqs last  enabled at (19421): [<80018c72>] cpu_idle+0x176/0x1c4
hardirqs last disabled at (19422): [<8001e494>] io_no_vtime+0xa/0x1a
softirqs last  enabled at (19418): [<8001dc9e>] do_softirq+0xa6/0xe8
softirqs last disabled at (19411): [<8001dc58>] do_softirq+0x60/0xe8
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove duplicate/redundant/wrong  IRQF_PERCPU definition.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're not reay to take a timer interrupt until timekeeping_init() has run.
But time_init() will start the time interrupt and if it is called with
local interrupts enabled we'll immediately take an interrupt and die.

Fix that by running timekeeping_init() prior to time_init().

We don't know _why_ local interrupts got enabled on Jesse Brandeburg's
machine.  That's a separate as-yet-unsolved problem.  THe patch adds a little
bit of debugging to detect that.

This whole requirement that local interrupts be held off during early boot
keeps on biting us.
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ARM devel merge introduced new machine functionality which was not
covered by the ARM -> genirq patches. Fix it up and make it compile
again.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For several proc-<cputype>.S files the include of proc-macros.S is
missing. Make it compile and work again.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The irqflags consolidation converted SA_PERCPU_IRQ to IRQF_PERCPU but
did not define the new constant.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Linus: "The hacks in kernel/irq/handle.c are really horrid. REALLY
horrid."

They are indeed. Move the dyntick quirks to ARM where they belong.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] sdhci: remove duplicate error message
  [MMC] sdhci: force DMA on some controllers
  [MMC] sdhci: quirk for broken reset
  [MMC] sdhci: Add SDHCI controller ids

This fixes a bug in fs/nfs which makes it impossible to build nfs
without having procfs enabled.
Signed-off-by: NDominik Hackl <dominik@hackl.dhs.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
  [ARM] 3683/2:  ARM: Convert at91rm9200 to generic irq handling
  [ARM] 3682/2:  ARM: Convert ixp4xx to generic irq handling
  [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling
  [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling
  [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling
  [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling
  [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling
  [ARM] 3697/1: ARM: Convert shark to generic irq handling
  [ARM] 3696/1: ARM: Convert clps711x to generic irq handling
  [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling
  [ARM] 3693/1: ARM: Convert omap1 to generic irq handling
  [ARM] 3691/1: ARM: Convert imx to generic irq handling
  [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling
  [ARM] 3687/1: ARM: Convert integrator to generic irq handling
  [ARM] 3685/1: ARM: Convert pxa to generic irq handling
  [ARM] 3684/1: ARM: Convert l7200 to generic irq handling
  [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling
  [ARM] 3680/1: ARM: Convert footbridge to generic irq handling
  [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes
  [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes
  ...

Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless
code).

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] sdhci: version bump sdhci
  [MMC] sdhci: support controller specific quirks
  [MMC] sdhci: more DMA capabilities tests
  [MMC] sdhci: reset sdhci controller early
  [MMC] sdhci: check controller version
  [MMC] sdhci: check only relevant inhibit bits
  [MMC] sdhci: Test for invalid block size
  [MMC] sdhci: Avoid sdhci DMA boundaries
  [MMC] Fix sdhci PIO routines
  [MMC] sdhci: fix interrupt handling
  [MMC] sdhci: correct register order
  [MMC] sdhci: proper timeout handling
  [MMC] sdhci: fix sdhci reset timeout
  [MMC] sdhci: fix timeout loops in sdhci
  [MMC] sdhci: support for multiple voltages
  [MMC] sdhci: print device id
  [MMC] sdhci: check SDHCI base clock

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>