m68k allmodconfig:

| drivers/misc/c2port/core.c: In function 'c2port_reset':
| drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type
| drivers/misc/c2port/core.c: In function 'c2port_strobe_ck':
| drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type

Include <linux/sched.h> to fix it, as m68k's local_irq_enable() needs to know
about struct task_struct.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 69961c37 ("[PATCH] m68k/Atari:
Interrupt updates") added a BUG_ON() with an incorrect upper bound
comparison, which causes an early crash on VME boards, where IRQ_USER is
8, cnt is 192 and NR_IRQS is 200.
Reported-by: NStephen N Chivers <schivers@csc.com.au>
Tested-by: NKars de Jong <jongk@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: improve phantom device detection

We don't want to get rid of the futexes just at exit() time, we want to
drop them when doing an execve() too, since that gets rid of the
previous VM image too.

Doing it at mm_release() time means that we automatically always do it
when we disassociate a VM map from the task.

Reported-by: pageexec@freemail.hu
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Alex Efros <powerman@powerman.name>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently libata uses four methods to detect device presence.

1. PHY status if available.
2. TF register R/W test (only promotes presence, never demotes)
3. device signature after reset
4. IDENTIFY failure detection in SFF state machine

Combination of the above works well in most cases but recently there
have been a few reports where a phantom device causes unnecessary
delay during probe.  In both cases, PHY status wasn't available.  In
one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which
didn't qualify as #4.  The other failed #2 but as it passed #3 and #4,
it still caused failure.

In both cases, phantom device reported diagnostic failure, so these
cases can be safely worked around by considering any !ATA_DRQ IDENTIFY
failure as NODEV_HINT if diagnostic failure is set.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (25 commits)
  USB: net: asix: add support for Cables-to-Go USB Ethernet adapter
  USB: gadget: cdc-acm deadlock fix
  USB: EHCI: fix divide-by-zero bug
  USB: EHCI: fix handling of dead controllers
  usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB
  ub: stub pre_reset and post_reset to fix oops
  USB: SISUSB2VGA driver: add 0x0711, 0x0903
  usb: unusual devs patch for Nokia 7610 Supernova
  USB: remove optional bus bindings in isp1760, fixing runtime warning
  + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree
  USB: storage: adjust comment in Kconfig
  USB: Fix PS3 USB shutdown problems
  USB: unusual_devs entry for Argosy USB mass-storage interface
  USB: cdc-acm.c: fix recursive lock in acm_start_wb error path
  USB: CP2101 Add device ID for AMB2560
  USB: mention URB_FREE_BUFFER in usb_free_urb documentation
  USB: Add YISO u893 usb modem vendor and product IDs to option driver
  usb: musb: fix BULK request on different available endpoints
  usb: musb: fix debug global variable name
  usb: musb: Removes compilation warning in gadget mode
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm: avoid destroying table in dm_any_congested
  dm: move pending queue wake_up end_io_acct
  dm mpath: warn if args ignored
  dm mpath: avoid attempting to activate null path
  dm stripe: fix init failure
  dm raid1: flush workqueue before destruction

dm_any_congested() just checks for the DMF_BLOCK_IO and has no
code to make sure that suspend waits for dm_any_congested() to
complete.  This patch adds such a check.

Without it, a race can occur with dm_table_put() attempting to
destroying the table in the wrong thread, the one running
dm_any_congested() which is meant to be quick and return
immediately.

Two examples of problems:
1. Sleeping functions called from congested code, the caller
   of which holds a spin lock.
2. An ABBA deadlock between pdflush and multipathd. The two locks
   in contention are inode lock and kernel lock.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This doesn't fix any bug, just moves wake_up immediately after decrementing
md->pending, for better code readability.

It must be clear to anyone manipulating md->pending to wake up
the queue if md->pending reaches zero, so move the wakeup as close to
the decrementing as possible.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Currently dm ignores the parameters provided to hardware handlers
without providing any notifications to the user.

This patch just prints a warning message so that the user knows that
the arguments are ignored.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Path activation code is called even when the pgpath is NULL. This could
lead to a panic in activate_path(). Such a panic is seen in -rt kernel.

This problem has been there before the pg_init() was moved to a
workqueue.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Don't proceed if dm_stripe_init() fails to register itself as a dm target.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

We queue work on keventd queue --- so this queue must be flushed in the
destructor. Otherwise, keventd could access mirror_set after it was freed.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: stable@kernel.org

Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to
10/100 Ethernet Adapter". USB id 0b95:772a.
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes a deadlock appearing with some USB peripheral drivers
when running CDC ACM gadget code.

The newish (2.6.27) CDC ACM event notification mechanism sends
messages (IN to the host) which are short enough to fit in most
FIFOs.  That means that with some peripheral controller drivers
(evidently not the ones used to verify the notification code!!)
the completion callback can be issued before queue() returns.

The deadlock would come because the completion callback and the
event-issuing code shared a spinlock.  Fix is trivial:  drop
that lock while queueing the message.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1164) fixes a bug in the EHCI scheduler.  The interval
value it uses is already in linear format, not logarithmically coded.
The existing code can sometimes crash the system by trying to divide
by zero.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1165) makes a few small changes in the logic used by
ehci-hcd when it encounters a controller error:

	Instead of printing out the masked status, it prints the
	original status as read directly from the hardware.

	It doesn't check for the STS_HALT status bit before taking
	action.  The mere fact that the STS_FATAL bit is set means
	that something bad has happened and the controller needs to
	be reset.  With the old code this test could never succeed
	because the STS_HALT bit was masked out from the status.

I anticipate that this will prevent the occasional "irq X: nobody cared"
problem people encounter when their EHCI controllers die.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When I used SuperH on-chip USB, there was the problem that accessed
r8a66597_root_hub which was not allocated.
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Due to recent changes to usb_reset_device, the following hang occurs:

events/0      D 0000000000000000     0     6      2
 ffff880037477cc0 0000000000000046 ffff880037477c50 ffffffff80237434
 ffffffff80574c80 00000001000a015c 0000000000000286 ffff8800374757d0
 ffff88002a31c860 ffff880037475a00 0000000036779140 ffff880037475a00
Call Trace:
 [<ffffffff80237434>] try_to_del_timer_sync+0x52/0x5b
 [<ffffffff8026f86c>] dma_pool_free+0x1a7/0x1ec
 [<ffffffffa02a928a>] ub_disconnect+0x8e/0x1ad [ub]
 [<ffffffff802407c9>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80378959>] usb_unbind_interface+0x5c/0xb7
 [<ffffffff8036ab70>] __device_release_driver+0x95/0xbd
 [<ffffffff8036ac70>] device_release_driver+0x21/0x2d
 [<ffffffff803789f8>] usb_driver_release_interface+0x44/0x83
 [<ffffffff80378ab9>] usb_forced_unbind_intf+0x17/0x1d
 [<ffffffff80371ba4>] usb_reset_device+0x7d/0x114
 [<ffffffffa02aaffd>] ub_reset_task+0x0/0x293 [ub]
 [<ffffffffa02ab1c1>] ub_reset_task+0x1c4/0x293 [ub]
 [<ffffffff8033dd1e>] flush_to_ldisc+0x0/0x1cd
 [<ffffffffa02aaffd>] ub_reset_task+0x0/0x293 [ub]
 [<ffffffff8023d302>] run_workqueue+0x87/0x114
 [<ffffffff8023d467>] worker_thread+0xd8/0xe7
 [<ffffffff802407c9>] autoremove_wake_function+0x0/0x2e
 [<ffffffff8023d38f>] worker_thread+0x0/0xe7
 [<ffffffff802404c1>] kthread+0x47/0x73
 [<ffffffff8022c8dd>] schedule_tail+0x27/0x60
 [<ffffffff8020c249>] child_rip+0xa/0x11
 [<ffffffff8024047a>] kthread+0x0/0x73
 [<ffffffff8020c23f>] child_rip+0x0/0x11

This is because usb_reset_device now unbinds, and that calls disconnect,
which in case of ub waits until the reset completes... which deadlocks.
Worse, this deadlocks keventd and this takes whole box down.

I'm going to fix this properly later, but let's unbreak the driver
quickly for non-composite devices at least.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlbert Comerma <albert.comerma@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Additional sectors were reported by the Nokia 7610 Supernova phone in
usb storage mode. The following patch rectifies the aforementioned
problem.
Signed-off-by: NRicky Wong Yung Fei <evilbladewarrior@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Roland Reported the following:
| kmem_cache_create: duplicate cache isp1760_qtd
| Pid: 461, comm: modprobe Tainted: G        W  2.6.28-rc2-git3-default #4
| Call Trace:
|  [<c017540e>] kmem_cache_create+0xc9/0x3a3
|  [<c0159a8d>] free_pages_bulk+0x16c/0x1c9
|  [<f165c05f>] isp1760_init+0x0/0xb [isp1760]
|  [<f165c018>] init_kmem_once+0x18/0x5f [isp1760]
|  [<f165c064>] isp1760_init+0x5/0xb [isp1760]
|  [<c010113d>] _stext+0x4d/0x148
|  [<c0142936>] load_module+0x12cd/0x142e
|  [<c01743c4>] kmem_cache_destroy+0x0/0xd7
|  [<c0142b1e>] sys_init_module+0x87/0x176
|  [<c01039eb>] sysenter_do_call+0x12/0x2f

The reason, is that ret is initialized with ENODEV instead of 0 _or_
the kmem cache is not freed in error case with no bus binding.

The difference between OF+PCI and OF only is
| 15148     804      32   15984    3e70 isp1760-of-pci.o
| 13748     676       8   14432    3860 isp1760-of.o

about 1.5 KiB.

Until there is a checkbox where the user *must* select atleast one item,
and may select multiple entries I don't make it selectable anymore.
Having a driver which can't be used under any circumstances is broken
anyway and I've seen distros shipping it that way.
Reported-by: NRoland Kletzing <devzero@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Enfora GSM2228 based on Cygnal Integrated Products chip uses the same
cp2101 driver.
Signed-off-by: NDamir N Abdullin <damir@mimas.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Since commit 65934a9a ("Make USB storage depend on SCSI rather than selecting
it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is
incorrect. Adjust it to the current situation.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add ehci_shutdown() or ohci_shutdown() calls to the USB
PS3 bus glue.  ehci_shutdown() and ohci_shutdown() do some
controller specific cleanups not done by usb_remove_hcd().

Fixes errors on shutdown or reboot similar to these:

  ps3-ehci-driver sb_07: HC died; cleaning up
  irq 51: nobody cared (try booting with the "irqpoll" option)

Related bugzilla reports:

  http://bugzilla.kernel.org/show_bug.cgi?id=11819
  http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE
interface.  This fixes Bugzilla #11843.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NLuciano Rocha <luciano@eurotux.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes an obvious bug in cdc-acm by avoiding a recursive lock on
acm_start_wb()'s error path. Should apply towards 2.6.27 stable and
2.6.28.

=============================================
[ INFO: possible recursive locking detected ]
2.6.27-2-pae #109
---------------------------------------------
python/31449 is trying to acquire lock:
 (&acm->write_lock){++..}, at: [<f89a0348>] acm_start_wb+0x5c/0x7b [cdc_acm]

but task is already holding lock:
 (&acm->write_lock){++..}, at: [<f89a04fb>] acm_tty_write+0xe1/0x167 [cdc_acm]

other info that might help us debug this:
2 locks held by python/31449:
 #0:  (&tty->atomic_write_lock){--..}, at: [<c0260fae>] tty_write_lock+0x14/0x3b
 #1:  (&acm->write_lock){++..}, at: [<f89a04fb>] acm_tty_write+0xe1/0x167 [cdc_acm]

stack backtrace:
Pid: 31449, comm: python Not tainted 2.6.27-2-pae #109
 [<c030f42f>] ? printk+0xf/0x18
 [<c0149f33>] __lock_acquire+0xc7b/0x1316
 [<c014a63e>] lock_acquire+0x70/0x97
 [<f89a0348>] ? acm_start_wb+0x5c/0x7b [cdc_acm]
 [<c0312109>] _spin_lock_irqsave+0x37/0x47
 [<f89a0348>] ? acm_start_wb+0x5c/0x7b [cdc_acm]
 [<f89a0348>] acm_start_wb+0x5c/0x7b [cdc_acm]
 [<f89a055d>] acm_tty_write+0x143/0x167 [cdc_acm]
 [<c0262a98>] write_chan+0x1cd/0x297
 [<c012527e>] ? default_wake_function+0x0/0xd
 [<c026111e>] tty_write+0x149/0x1b9
 [<c02628cb>] ? write_chan+0x0/0x297
 [<c01912c5>] ? rw_verify_area+0x76/0x98
 [<c0260fd5>] ? tty_write+0x0/0x1b9
 [<c01919ba>] vfs_write+0x8c/0x136
 [<c0191afd>] sys_write+0x3b/0x60
 [<c0103beb>] sysenter_do_call+0x12/0x3f
 =======================
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the device vendor and product IDs for Amber Wireless AMB2560
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usb_free_urb comment says that the transfer buffer will not be
freed, but this is not the case when URB_FREE_BUFFER is set.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds YISO u893 usb modem vendor and product ID to option.c.

I had a better experience using this modification and the same system.
Signed-off-by: NLeslie Harlley Watter <leslie@watter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes co-working issue of usb serial device with usb/net devices while
oter endpoints are free and can be used.This patch implements the policy
that if endpoint resources are available then different BULK request goes
to different endpoint otherwise they are multiplexed to one reserved
endpoint as currently done.

Switch statement case is reordered in musb_giveback() to take care of
bulk request both in multiplex scenario and otherwise.

NAK limit scheme has to be added for multiplexed BULK request scenario
to avoid endpoint starvation due to usb/net devices.
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In order to avoid namespace conflicts, add a prefix
to our kernel-wise symbol.
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes compilation warning when musb is configured in gadget mode.
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add an errno to failing case.
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes blurred capture images in dma mode. Isochronous error field in
urb and source data buffer pointer were not updated properly in dma
mode.
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1155) fixes a bug in usbcore.  When interfaces are
deleted, either because the device was disconnected or because of a
configuration change, the extra attribute files and child endpoint
devices may get left behind.  This is because the core removes them
before calling device_del().  But during device_del(), after the
driver is unbound the core will reinstall altsetting 0 and recreate
those extra attributes and children.

The patch prevents this by adding a flag to record when the interface
is in the midst of being unregistered.  When the flag is set, the
attribute files and child devices will not be created.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org> [2.6.27, 2.6.26, 2.6.25]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685

When A Nikon D300 camera is connected to a system it is seen in
/proc/bus/pci/devices but is not accessible.

This is seen in the above file:

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04b0 ProdID=041a Rev= 1.03
S:  Manufacturer=NIKON
S:  Product=NIKON DSC D300
S:  SerialNumber=000008014379
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=32ms

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes a reported compiler warning.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: ignore bit0 of _OSC return code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix shutdown cleanup