- 14 2月, 2017 4 次提交
-
-
由 Tobias Klauser 提交于
garp_port is only used in net/802/garp.c which is only compiled with CONFIG_GARP enabled. Same goes for mrp_port which is only used in net/802/mrp.c with CONFIG_MRP enabled. Only include the two members in struct net_device if their respective CONFIG_* is enabled. This saves a few bytes in struct net_device in case CONFIG_GARP or CONFIG_MRP are not enabled. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 79e7fff4 ("net: remove support for per driver ndo_busy_poll()") made them obsolete. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-02-11 This series contains updates to i40e and i40evf only. Jake makes a minor change to prevent a minor bit of work, if it is not necessary. In the case where we do not have a client, there is no need to check the client params, so move the check till after we have ensured we have a client. Correct a code comment which incorrectly implied that raw_packet buffers were freed in i40e_clean_tx_ring(), so fixed the code comment to better explain where memory is freed. Reduce the severity and frequency of the message notifying we cleared the receive timestamp register, since the logic has a much better detection scheme that could detect a stalled receive timestamp register. The improved logic was actually causing the notification message to occur more frequently and was giving the user a false perception that a timestamp event was missed for a valid packet, so reduce the severity from dev_warn to dev_dbg and only fire off the message when 3 or 4 of the RXTIME registers are stalled and get cleared within the same watchdog event. Fixed a bug, where we were modifying the mac_filter outside a lock when handling the addition of broadcast filters. Fix this by updating i40e_update_filter_state logic so that it knows to avoid broadcast filters, which ensures that we do not have to remove the filter separately and can put it back using the normal flow. Refactored how we add new filters to firmware to avoid a race condition that can occur due to removing filters from the hash temporarily. Mitch adds a sleep (without timeout) so that we wait for a reply from the PF before we continue, since the iWarp client cannot continue until the operation is completed. Fixed up a function which could never return an error, to be void and cleaned up the checking of the now null and void return value. Scott limits the DMA sync to CPU to the actual length of the incoming packet, versus the syncing of the entire buffer. Also reduces the receive buffer struct (by a single pointer) and align the driver to be more consistent with other Intel drivers with respect to packets that span buffers. Sudheer adds a field to track the bus number info and modified log statements to print bus, device and function information. Henry adds the ability to store the FEC status bits from the link up event. Also adds the ethtool support for FEC capabilities and 25G link types. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Belous 提交于
Using new link mode indices instead deprecated SUPPORTED_/ADVERTISED_ macro. Added indication for 2500 and 5000mbit link modes (AQtion adapter already supports these speeds). Signed-off-by: NPavel Belous <pavel.belous@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2017 26 次提交
-
-
由 David S. Miller 提交于
Andrew Lunn says: ==================== mv88e6xxx Watchdog support The Marvell switches have an in built watchdog over some of the internal state machine. The watchdog can be configured to raise an interrupt on error. The problem the watchdog found is then logged to the kernel log. The older switches can automagically perform a software reset when the watchdog triggers. This just resets the internal state machine, but leaves the switch configuration unchanged. The 6390 family of switches cannot both raise an interrupt and automagically perform a software reset. So the interrupt handler has to perform the switch reset, and then re-enable the watchdog interrupts. This has been tested using hacked together debugfs code which allows the "force" bit to be set, so cause a watchdog interrupt. v2: Remove g2_prefix ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Implement the ops needed to support the watchdog for the MV88E6390 family. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
The switch contains a watchdog looking for issues with the internal gubbins of the switch. Hook the interrupt the watchdog triggers and log the value of the control register indicating why the watchdog fired. The watchdog can only be cleared with a switch reset, which will destroy the current configuration. Rather than doing this, just disable the interrupt. The mv88e6390 family has different watchdog registers. So use an ops structure, so support for the mv88e6390 family can be added later. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Acked-by: NHyong-Youb Kim <hykim@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Misc updates. Miscellaneous updates include update of the firmware spec, ethtool flash enhancement, ethtool -l minor fix, NTUPLE support enhancements, FEC link settings message during link up, and new PCI IDs. Please review. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Deepak Khungar 提交于
Signed-off-by: NDeepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add proper puctuation to make the message more clear. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Print FEC (Forward Error Correction) autoneg and encoding settings during link up. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
If it is a VF or an NPAR function, the firmware call to setup the PHY will fail. Adding this check will prevent unnecessary firmware calls to setup the PHY unless calling from the PF. This will also eliminate many unnecessary warning messages when the call from a VF or NPAR fails. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
If skb_flow_dissect_flow_keys() returns with the encapsulation flag set, pass the information to the firmware to setup the NTUPLE filter accordingly. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Commit ae10ae74 ("bnxt_en: Add new hardware RFS mode.") has added code to allow NTUPLE to be enabled on VFs. So we now remove the BNXT_VF() check in rfs_capable() to allow NTUPLE on VFs. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
With commit d1e7925e ("bnxt_en: Centralize logic to reserve rings."), ring allocation for combined rings has become stricter. A combined ring must now have an rx-tx ring pair. The pre-set max. for combined rings should now be min(rx, tx). Fixes: d1e7925e ("bnxt_en: Centralize logic to reserve rings.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kshitij Soni 提交于
If the HWRM_NVM_INSTALL_UPDATE command fails with the error code NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR, retry the command with a new flag to allow defragmentation. Since we are checking the response for error code, we also need to take the mutex until we finish reading the response. Signed-off-by: NKshitij Soni <kshitij.soni@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new spec has NVRAM defragmentation support which will be used in the next patch to improve ethtool flash operation. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, most relevantly they are: 1) Extend nft_exthdr to allow to match TCP options bitfields, from Manuel Messner. 2) Allow to check if IPv6 extension header is present in nf_tables, from Phil Sutter. 3) Allow to set and match conntrack zone in nf_tables, patches from Florian Westphal. 4) Several patches for the nf_tables set infrastructure, this includes cleanup and preparatory patches to add the new bitmap set type. 5) Add optional ruleset generation ID check to nf_tables and allow to delete rules that got no public handle yet via NFTA_RULE_ID. These patches add the missing kernel infrastructure to support rule deletion by description from userspace. 6) Missing NFT_SET_OBJECT flag to select the right backend when sets stores an object map. 7) A couple of cleanups for the expectation and SIP helper, from Gao feng. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 2月, 2017 10 次提交
-
-
由 Pablo Neira Ayuso 提交于
Check for NFT_SET_OBJECT feature flag, otherwise we may end up selecting the wrong set backend. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
It's been a while since Patrick has been suspended as coreteam member [1]. Update this file to remove him. While at this, remove references to all foo-tables variants, given the project hosts more than just that, eg. ipset, conntrack, ... [1] https://marc.info/?l=netfilter-devel&m=146887464512702Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This new attribute allows us to uniquely identify a rule in transaction. Robots may trigger an insertion followed by deletion in a batch, in that scenario we still don't have a public rule handle that we can use to delete the rule. This is similar to the NFTA_SET_ID attribute that allows us to refer to an anonymous set from a batch. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch implements the check generation id as provided by nfnetlink. This allows us to reject ruleset updates against stale baseline, so userspace can retry update with a fresh ruleset cache. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch allows userspace to specify the generation ID that has been used to build an incremental batch update. If userspace specifies the generation ID in the batch message as attribute, then nfnetlink compares it to the current generation ID so you make sure that you work against the right baseline. Otherwise, bail out with ERESTART so userspace knows that its changeset is stale and needs to respin. Userspace can do this transparently at the cost of taking slightly more time to refresh caches and rework the changeset. This check is optional, if there is no NFNL_BATCH_GENID attribute in the batch begin message, then no check is performed. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Add new nfnetlink_rcv_skb_batch() to wrap initial nfnetlink batch handling. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Use uX types instead. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao Feng 提交于
Because nf_ct_expect_insert() always succeeds now, its return value can be just void instead of int. And remove code that checks for its return value. Signed-off-by: NGao Feng <fgao@ikuai8.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao Feng 提交于
timer_del() followed by timer_add() can be replaced by mod_timer_pending(). Signed-off-by: NGao Feng <fgao@ikuai8.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Henry Tieman 提交于
Ethtool support needs to save more PHY information. The added information includes FEC capabilities and 25G link types. Without this change it is possible to lose 25G or FEC settings by using ethtool. Change-ID: Ie42255b1e901ffbf9583b8c46466a54894114280 Signed-off-by: NHenry Tieman <henry.w.tieman@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-